Stable monodisperse nanomagnetic colloidal suspensions: An overview

Determination of bupropion by off-line coupling Fe3O4@CuO&GO nanocomposite and ion mobility spectrometry with application to biological samples

In this study, an off-line coupling of dispersive solid-phase extraction (DSPE) and ion mobility spectrometry (IMS) was introduced to extract and determine bupropion (BUP). A magnetic nanocomposite adsorbent (Fe3O4@CuO&GO) was fabricated by combining graphene oxide (GO) sheets with Fe3O4 and CuO through coprecipitation method. The synthesized adsorbent was characterized and analyzed using the analytical techniques. The effect of extraction parameters including desorption solvent (type and volume), pH, adsorbent amount, contact time, temperature, and the volume of analyte solution on the extraction efficiency was investigated and optimized. The operational parameters of IMS method were also investigated. Under the optimum conditions (DSPE-IMS), the proposed method provided a linear range 4.0-24.0 ng for BUP with a determination coefficient R2 ≥ 0.98. LOD and LOQ values were 0.7 and 2.2 ng for BUP. The repeatability of proposed method was evaluated and reported as relative standard deviation (RSD% ≤ 5.5). The developed method was applied to determine BUP in different biological samples, in which satisfactory results were obtained (93.0-98.0%).

Targeted delivery of silibinin via magnetic niosomal nanoparticles: potential application in treatment of colon cancer cells

Introduction: In recent years, various nanoparticles (NPs) have been discovered and synthesized for the targeted therapy of cancer cells. Targeted delivery increases the local concentration of therapeutics and minimizes side effects. Therefore, NPs-mediated targeted drug delivery systems have become a promising approach for the treatment of various cancers. As a result, in the current study, we aimed to design silibinin-loaded magnetic niosomes nanoparticles (MNNPs) and investigate their cytotoxicity property in colorectal cancer cell treatment. Methods: MNPs ferrofluids were prepared and encapsulated into niosomes (NIOs) by the thin film hydration method. Afterward, the morphology, size, and chemical structure of the synthesized MNNPs were evaluated using the TEM, DLS, and FT-IR techniques, respectively. Results and Discussion: The distribution number of MNNPs was obtained at about 50 nm and 70 nm with a surface charge of -19.0 mV by TEM and DLS analysis, respectively. Silibinin loading efficiency in NIOs was about 90%, and the drug release pattern showed a controlled release with a maximum amount of about 49% and 70%, within 4 h in pH = 7.4 and pH = 5.8, respectively. To investigate the cytotoxicity effect, HT-29 cells were treated with the various concentration of the drugs for 24 and 48 h and evaluated by the MTT as well as flow cytometry assays. Obtained results demonstrated promoted cell cytotoxicity of silibinin-loaded MNNPs (5-fold decrease in cell viability) compared to pure silibinin (3-fold decrease in cell viability) while had no significant cytotoxic effect on HEK-293 (normal cell line) cells, and the cellular uptake level of MNNPs by the HT-29 cell line was enhanced compared to the control group. In conclusion, silibinin-loaded MNNPs complex can be considered as an efficient treatment approach for colorectal cancer cells.

The influence of pressure on the acoustic cavitation in saturated CO2-expanded N, N-dimethylformamide

CO₂-expanded organic solvent is a kind of important fluid medium and has broad applications in chemical industry, environmental protection and other fields. Ultrasonic cavitation in gas expanded liquids (GXLs) is conducive to enhancing mass transfer and producing many exciting phenomena. In this paper, the ultrasonic cavitations and streaming in the saturated CO₂-expanded liquid N, N-dimethylformamide (DMF) at 4.2 MPa and 5.2 MPa are observed by a high-speed camera. The cavitation intensity and time trace of pressure pulses are recorded using a PZT hydrophone. The influences of gas-liquid equilibrium pressure and ultrasonic power on the cluster dynamics of transient and stable cavitation are examined. The excess molar enthalpies required for CO₂ dissociation from DMF are calculated by Peng-Robinson equations of state and the change of surface free energy of CO₂-expanded DMF is predicted. The results show that the excess enthalpy of the mixture is one of the key factors to control ultrasonic cavitation at high pressurized conditions, while the surface tension is the key factor for low pressure. As the increase of applied ultrasonic power, the formation and collapsing frequency of bubble clusters increases, and the amplitude and cyclic frequency of pressure pulse are enhanced. The transient cavitation intensity increases as it reaches a maximum value at a certain ultrasonic power and then decreases. The change trends of stable cavitation intensity under different pressures are basically same. It can be concluded from the evidence that ultrasonic cavitation in CO₂-expanded DMF is affected by the combined effect of compression and substitution: compression depresses the nucleation and growth of bubbles, while the high solubility of CO₂ in DMF is conducive to the generation of bubbles in cavitation.

Targeted extracellular vesicle delivery systems employing superparamagnetic iron oxide nanoparticles

In the past decade, the study of extracellular vesicles (EVs), especially exosomes (50-150 nm) have attracted growing interest in numerous areas of cancer and tissue regeneration due to their unique biological features. A low isolation yield and insufficient targeting abilities limit their therapeutic applicability. Recently, superparamagnetic iron oxide nanoparticles (SPIONs) with magnetic navigation have been exploited to enhance the targeting ability of EVs. To construct targeted EV delivery systems engineered by SPIONs, several groups have pioneered the use of different techniques, such as electroporation, natural incubation, and cell extrusion, to directly internalize SPIONs into EVs. Furthermore, some endogenous ligands, such as transferrins, antibodies, aptamers, and streptavidin, were shown to enable modification of SPIONs, which increases binding with EVs. In this review, we summarized recent advances in targeted EV delivery systems engineered by SPIONs and focused on the key methodological approaches and the current applications of magnetic EVs. This report aims to address the existing challenges and provide comprehensive insights into targeted EV delivery systems. STATEMENT OF SIGNIFICANCE: Targeted extracellular vesicle (EV) delivery systems engineered by superparamagnetic iron oxide nanoparticles (SPIONs) have attracted wide attention and research interest in recent years. Such strategies employ external magnet fields to manipulate SPION-functionalized EVs remotely, aiming to enhance their accumulation and penetration in vivo. Although iron oxide nanoparticle laden EVs are interesting, they are controversial at present, hampering the progress in their clinical application. A thorough integration of these studies is needed for an advanced insight and rational design of targeted EV delivery systems. In this review, we summarize the latest advances in the design strategies of targeted EV delivery systems engineered by SPIONs with a focus on their key methodological approaches, current applications, limitation and future perspectives, which may facilitate the development of natural theranostic nanoplatforms.

Ultrasonic cavitation in CO2-expanded N, N-dimethylformamide (DMF)

Due to the tunability in mass transfer, solvation and solubility, gas-expanded liquids show advantages over traditional organic solvents in many characteristics. Ultrasonication is a commonly used method to promote heat and mass transfer. The introduction of ultrasonic technology into the gas-expanded liquid system can promote the polymerization of polymer monomers, enhance extraction efficiency, and control the growth size of nanocrystals, etc. Although acoustic cavitation has been extensively explored in aqueous solutions, there are still few studies on cavitation in organic liquids, especially in gas-expanded liquid systems. In this article, the development of cavitation bubble cloud structure in CO₂-expanded N, N-dimethylformamide (DMF) was observed by a high-speed camera, and the cavitation intensity was recorded using a spherical hydrophone. It was found that the magnitude of the transient cavitation energy was not only related to input power, but also closely related to CO₂ content. The combination of ultrasound (causing a rapid alternation of gas solubility) and gas-expanded liquid system (causing a decrease in viscosity and surface tension of liquids) is expected to provide a perfect platform for high-speed mass transfer.

Magnetic Particle Imaging: Current and Future Applications, Magnetic Nanoparticle Synthesis Methods and Safety Measures

Magnetic nanoparticles (MNPs) have a wide range of applications; an area of particular interest is magnetic particle imaging (MPI). MPI is an imaging modality that utilizes superparamagnetic iron oxide particles (SPIONs) as tracer particles to produce highly sensitive and specific images in a broad range of applications, including cardiovascular, neuroimaging, tumor imaging, magnetic hyperthermia and cellular tracking. While there are hurdles to overcome, including accessibility of products, and an understanding of safety and toxicity profiles, MPI has the potential to revolutionize research and clinical biomedical imaging. This review will explore a brief history of MPI, MNP synthesis methods, current and future applications, and safety concerns associated with this newly emerging imaging modality.

PEG size effect and its interaction with Fe3O4 nanoparticles synthesized by solvothermal method: morphology and effect of pH on the stability

The synthesis and characterization of Fe3O4 magnetic nanoparticles (MNPs) obtained by the solvothermal method in ethyleneglycol with the addition of polyethyleneglycol (PEG) with molar mass of 4000, 8000 and 20000 g mol−1 are described, aimed at evaluating its effect on the size, morphology and stability of the nanoparticle. The syntheses were carried out by solubilizing the precursors at 85 and 140 °C, providing smaller nanoparticles as well as smaller crystallites at higher temperatures, while the effect of PEG was less evident. Measurements of nanoparticle surface areas synthesized with PEG 4000 and 20000 g mol−1 at 140 °C provided values of 76 and 14 m2 g−1, respectively, indicating that PEG 4000 surrounds the crystallites, while PEG 20000 preferably surrounds the whole MNP. As a consequence, MNP with very dissimilar porosities were obtained. Electron energy loss spectroscopy (EELS) indicated that MNP synthesized with PEG 20000 possesses higher electronic density than those obtained with PEG 4000, in agreement with the surface area results. Infrared spectroscopy and thermogravimetric analysis demonstrated the presence of PEG in the particles, whose amount increased as the particle size decreased. Dynamic Light Scattering (DLS) measurements showed that MNP hydrodynamic radius increases with the PEG size and stability in solution increases from pH 5.0 to 9.0 for smaller NP, while polymer presents slight effect on stability for the larger particles. The results obtained in this work show that properties of MNP can be tuned by the dissolution temperature of the chemical precursors and the PEG molar mass, changing their porosity and stability in solution, that are important variables in processes of adsorption, drug delivery and sensor developing.

Exploring edge functionalised blue phosphorene nanoribbons as novel photocatalysts for water splitting

1D phosphorene nanoribbon edges activating water molecules under sunlight.

Mono-dispersed nano-hydroxyapatite based MRI probe with tetrahedral DNA nanostructures modification for in vitro tumor cell imaging

Taking advantage of the superior biocompatibility, good stability in a wide pH and temperature range, as well as its strong affinity with DNA of hydroxyapatite (HAp), tetrahedral DNA nanostructures (TDNs) conjugated with AS1411 aptamer (anti-nucleolin overexpressed on tumor cell membranes) were employed as affinity ligands to construct a novel mono-dispersed HAp based probe with Gd³⁺ doping (Apt-TDNs-GdHAp) for MR imaging. The adsorption of TDNs on the nano-HAp surface facilely accomplished the construction of the Apt-TDNs-GdHAp probes. Meanwhile, the use of hydrophilic TDNs not only favored the phase-transfer from the oil phase to the aqueous phase, but also enhanced the mono-dispersion of this probe due to the well-ordered distribution of TDNs on the surface of nano-HAp. Moreover, Apt-TDNs-GdHAp probe with a better mono-dispersion and crystalinity achieved twice higher longitudinal relaxivity (r₁ value) than that of GdHAp synthesized by microwave-assisted method (Microwave-GdHAp), exhibiting much more excellent T₁-weighted imaging performance. With the introduction of TDNs, the stability and the tumor-targeting accessibility were also greatly improved, showing its great potential for further bio-applications.

PLGA-Based Drug Delivery Systems for Remotely Triggered Cancer Therapeutic and Diagnostic Applications

Intelligent drug delivery systems based on nanotechnology have been widely developed and investigated in the field of nanomedicine since they were able to maximize the therapeutic efficacy and minimize the undesirable adverse effects. Among a variety of organic or inorganic nanomaterials available to fabricate drug delivery systems (DDSs) for cancer therapy and diagnosis, poly(D,L-lactic-co-glycolic acid) (PLGA) has been extensively employed due to its biocompatibility and biodegradability. In this paper, we review the recent status of research on the application of PLGA-based drug delivery systems (DDSs) in remotely triggered cancer therapy and the strategies for tumor imaging provided by PLGA-based DDSs. We firstly discuss the employment of PLGA-based DDSs for remotely triggered cancer therapy, including photo-triggered, ultrasound-triggered, magnetic field-triggered, and radiofrequency-triggered cancer therapy. Photo-triggered cancer therapy involves photodynamic therapy (PDT), photothermal therapy (PTT), and photo-triggered chemotherapeutics release. Ultrasound-triggered cancer therapy involves high intensity focused ultrasound (HIFU) treatment, ultrasound-triggered chemotherapeutics release, and ultrasound-enhanced efficiency of gene transfection. The strategies which endows PLGA-based DDSs with imaging properties and the PLGA-based cancer theranostics are further discussed. Additionally, we also discuss the targeting strategies which provide PLGA-based DDSs with passive, active or magnetic tumor-targeting abilities. Numerous studies cited in our review demonstrate the great potential of PLGA-based DDSs as effective theranostic agent for cancer therapy and diagnosis.

Chitosan nanoparticles loaded with clove essential oil: Characterization, antioxidant and antibacterial activities

One of the recent trends in the food industry is application of natural antioxidant/antimicrobial agents. In this study, essential oil of clove buds was extracted and encapsulated in chitosan nanoparticles using a two-step technique of emulsion-ionic gelation. A good retention rate (55.8-73.4 %) of clove essential oil (CEO) loaded in chitosan nanoparticles was confirmed. Also, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and differential scanning calorimetry (DSC) analyses revealed the success of CEO encapsulation. Scanning electron microscopy (SEM) images illustrated regular distribution and spherical shape of nanoparticles with a size range of 223-444 nm. The antioxidant activity of CEO-loaded chitosan nanoparticles was higher than free CEO. Similarly, CEO-loaded chitosan nanoparticles had a high antibacterial activity against L. monocytogenes and S. aureus (inhibition halo diameter of 4.80-4.78 cm). This technique could improve the efficiency of CEO in food products and a delivery system for novel applications such as active packaging.

Magnetic Nanoparticle Systems for Nanomedicine—A Materials Science Perspective

Iron oxide nanoparticles are the basic components of the most promising magneto-responsive systems for nanomedicine, ranging from drug delivery and imaging to hyperthermia cancer treatment, as well as to rapid point-of-care diagnostic systems with magnetic nanoparticles. Advanced synthesis procedures of single- and multi-core iron-oxide nanoparticles with high magnetic moment and well-defined size and shape, being designed to simultaneously fulfill multiple biomedical functionalities, have been thoroughly evaluated. The review summarizes recent results in manufacturing novel magnetic nanoparticle systems, as well as the use of proper characterization methods that are relevant to the magneto-responsive nature, size range, surface chemistry, structuring behavior, and exploitation conditions of magnetic nanosystems. These refer to particle size, size distribution and aggregation characteristics, zeta potential/surface charge, surface coating, functionalization and catalytic activity, morphology (shape, surface area, surface topology, crystallinity), solubility and stability (e.g., solubility in biological fluids, stability on storage), as well as to DC and AC magnetic properties, particle agglomerates formation, and flow behavior under applied magnetic field (magnetorheology).

β-Cyclodextrin engineered γ-Fe2O3@ hydroxyapatite nanocomposite as a novel scaffold for the synthesis of phenacyl derivatives

Magnetic hydroxyapatite (HAp) is being widely investigated for various applications in medical engineering and nanocomposite for transformation reaction. The present work describes an efficient procedure for the synthesis of phenacyl derivatives employing a novel, green and magnetically retrievable nanocomposite via the grafting of β-cyclodextrin moieties on the magnetic hydroxyapatite surface, γ-Fe₂O₃@HAp-CD. The structure and composition of the nanocomposite was performed by different methods and analyzed by Infrared Spectroscopy (FT-IR), Field Emission Scanning Electron Microscopy (FE-SEM), transmission electron microscopy (TEM), Thermo-Gravimetric Analysis (TGA), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS) and Brunauer Emmett Teller (BET) and vibrating sample magnetometry (VSM). Our results indicate that conjugation with β-CD improves the catalytic activity in the reaction.

Magnetic nanotechnological devices as efficient tools to improve the quality of water: analysis on a real case

Magnetic nanoparticles (MNPs), based on iron oxide (magnetite) and ferrogel of gelatin and MNPs, were employed as efficient tools for the removal of heavy metals and nutrients from water samples from Bahia Blanca estuarine (BBE). An exhaustive adsorption performance of Cu, NO₃^-, and NO₂^- was conducted in batch using model solutions aiming to adjust the adsorption conditions. Adsorption studies using water simulating the real samples were also performed. Both kinds of nanomaterials demonstrated an efficiency between 60 and 80%, and 85% for the removal of heavy metals and NO₃^- and NO₂^-, respectively. Similar adsorption assays were performed using BBE water samples, employing the experimental conditions explored with model and simulated water. The reached efficiency was 30 and 45% for heavy metal and nutrient removal, respectively, using nanoparticles; meanwhile, ferrogels displayed a removal capacity around 50-60%. The nanoparticles showed structural instability by the leaching of iron to the medium after the adsorption processes. Ferrogels remained almost inalterable in terms of their integrity during the adsorption time. These materials showed satisfactory perspectives regarding their reuse possibilities. They were used for almost five repeated cycles of adsorption without losing efficiency on the adsorption. The results of this study suggest that MNPs and FGs appear as versatile and promising materials that may be considered as valid alternatives to the actual tools for the remediation of real water samples.

Albumin and Hyaluronic Acid-Coated Superparamagnetic Iron Oxide Nanoparticles Loaded with Paclitaxel for Biomedical Applications

Super paramagnetic iron oxide nanoparticles (SPION) were augmented by both hyaluronic acid (HA) and bovine serum albumin (BSA), each covalently conjugated to dopamine (DA) enabling their anchoring to the SPION. HA and BSA were found to simultaneously serve as stabilizing polymers of Fe₃O₄·DA-BSA/HA in water. Fe₃O₄·DA-BSA/HA efficiently entrapped and released the hydrophobic cytotoxic drug paclitaxel (PTX). The relative amount of HA and BSA modulates not only the total solubility but also the paramagnetic relaxation properties of the preparation. The entrapping of PTX did not influence the paramagnetic relaxation properties of Fe₃O₄·DA-BSA. Thus, by tuning the surface structure and loading, we can tune the theranostic properties of the system.

Antibacterial modification of an injectable, biodegradable, non-cytotoxic block copolymer-based physical gel with body temperature-stimulated sol-gel transition and controlled drug release

Biomaterials are being extensively used in various biomedical fields; however, they are readily infected with microorganisms, thus posing a serious threat to the public health care. We herein presented a facile route to the antibacterial modification of an important A-B-A type biomaterial using poly (ethylene glycol) methyl ether (mPEG)- poly(ε-caprolactone) (PCL)-mPEG as a typical model. Inexpensive, commercial bis(2-hydroxyethyl) methylammonium chloride (DMA) was adopted as an antibacterial unit. The effective synthesis of the antibacterial copolymer mPEG-PCL-∼∼∼-PCL-mPEG (where ∼∼∼ denotes the segment with DMA units) was well confirmed by FTIR and (1)H NMR spectra. At an appropriate modification extent, the DMA unit could render the copolymer mPEG-PCL-∼∼∼-PCL-mPEG highly antibacterial, but did not largely alter its fascinating intrinsic properties including the thermosensitivity (e.g., the body temperature-induced sol-gel transition), non-cytotoxicity, and controlled drug release. A detailed study on the sol-gel-sol transition behavior of different copolymers showed that an appropriate extent of modification with DMA retained a sol-gel-sol transition, despite the fact that a too high extent caused a loss of sol-gel-sol transition. The hydrophilic and hydrophobic balance between mPEG and PCL was most likely broken upon a high extent of quaternization due to a large disturbance effect of DMA units at a large quantity (as evidenced by the heavily depressed PCL segment crystallinity), and thus the micelle aggregation mechanism for the gel formation could not work anymore, along with the loss of the thermosensitivity. The work presented here is highly expected to be generalized for synthesis of various block copolymers with immunity to microorganisms. Light may also be shed on understanding the phase transition behavior of various multiblock copolymers.

Functionalized SPIONs: the surfactant nature modulates the self-assembly and cluster formation

SuperParamagnetic Iron Oxide Nanoparticles (SPIONs) represent a suitable system for several applications especially in nanomedicine. Great efforts have been made to design stable and biocompatible functionalized SPIONs suitable for diagnostics and drug delivery. In particular, zwitterionic-surfactant functionalized SPIONs, obtained through a coating strategy based on hydrophobic interaction, are promising systems for biomedical applications. The size of functionalized SPIONs has emerged as a crucial parameter determining their fate in living organisms. However, not all the proposed functionalization strategies lead to monodispersed systems and SPION clustering often occurs. In this study, we report a systematic investigation on different surfactant-functionalized SPIONs in order to explore the possibility of tuning the particle size by choosing an appropriate amphiphilic molecule. By combining Small-Angle Neutron Scattering (SANS) and Dynamic Light Scattering (DLS) analysis, we have provided a detailed description of the functionalized SPION structure. Furthermore, we have also related the surfactant aggregation properties, i.e. the Critical Micelle Concentration (CMC), to their efficiency in coating the SPION surface. A lack in the formation of a compact shell leads to a clusters formation. On this basis, the present study contributes to furnishing decisive information to define synthetic strategies able to tune functionalized-SPION design.

Progress on nanoparticle-based carbon nanotube complex: fabrication and potential application

Carbon nanotubes (CNTs) are considered as one of the most intensively explored nanostructured materials and have been widely used as a platform material for metal and semiconductor nanoparticles (NPs) due to their large and chemically active surface area. Several approaches have been described in the literature to immobilize NPs on the surface of CNTs. This report reviews the recent developments in this area by exploring the various techniques where nanotubes can be functionalized with NPs to improve the optical, mechanical, thermal, medical, electrical, and magnetic applications of CNTs.

Synthesis and in vitro properties of iron oxide nanoparticles grafted with brushed phosphorylcholine and polyethylene glycol

A new and facile strategy for grafting IONPs by phosphonic acic terminated PC brushes has been demonstrated and characterized in vitro.