Salt-induced reentrant stability of polyion-decorated particles with tunable surface charge density

Influence of drug/lipid interaction on the entrapment efficiency of isoniazid in liposomes for antitubercular therapy: a multi-faced investigation

Isoniazid (INH) is one of the primary drugs used in tuberculosis treatment and its encapsulation in liposomal vesicles can both improve its therapeutic index and minimize toxicity. Here we consider mixtures of hydrogenated soy phosphatidylcholine-phosphatidylglycerol (HSPC-DPPG) to get novel biocompatible liposomes for INH delivery. We determined INH encapsulation efficiency by coupling for the first time UV and Laser Transmission Spectroscopy and we showed that HSPC-DPPG liposomes can load more INH than expected from simple geometrical arguments, thus suggesting the presence of drug-lipid association. To focus on this aspect, which has never been explored in liposomal formulations, we employed several complementary techniques, such as dynamic and static light scattering, calorimetry and surface pressure measurements on lipid monolayers. We find that INH-lipid interaction increases the entrapment capability of liposomes due to INH adsorption. Moreover, the preferential INH-HSPC dipole-dipole interaction promotes the modification of lipid ordering, favoring the formation of HSPC-richer domains in excess of DPPG. Our findings highlight how investigating the fundamental aspects of drug-lipid interactions is of paramount importance for the optimal design of liposomal nanocarriers.

The Double-Faced Electrostatic Behavior of PNIPAm Microgels

PNIPAm microgels synthesized via free radical polymerization (FRP) are often considered as neutral colloids in aqueous media, although it is well known, since the pioneering works of Pelton and coworkers, that the vanishing electrophoretic mobility characterizing swollen microgels largely increases above the lower critical solution temperature (LCST) of PNIPAm, at which microgels partially collapse. The presence of an electric charge has been attributed to the ionic initiators that are employed when FRP is performed in water and that stay anchored to microgel particles. Combining dynamic light scattering (DLS), electrophoresis, transmission electron microscopy (TEM) and atomic force microscopy (AFM) experiments, we show that collapsed ionic PNIPAm microgels undergo large mobility reversal and reentrant condensation when they are co-suspended with oppositely charged polyelectrolytes (PE) or nanoparticles (NP), while their stability remains unaffected by PE or NP addition at lower temperatures, where microgels are swollen and their charge density is low. Our results highlight a somehow double-faced electrostatic behavior of PNIPAm microgels due to their tunable charge density: they behave as quasi-neutral colloids at temperature below LCST, while they strongly interact with oppositely charged species when they are in their collapsed state. The very similar phenomenology encountered when microgels are surrounded by polylysine chains and silica nanoparticles points to the general character of this twofold behavior of PNIPAm-based colloids in water.

Cationic lipids for gene delivery: many players, one goal

Lipid-based carriers represent the most widely used alternative to viral vectors for gene expression and gene silencing purposes. This class of non-viral vectors is particularly attractive for their ease of synthesis and chemical modifications to endow them with desirable properties. Despite combinatorial approaches have led to the generation of a large number of cationic lipids displaying different supramolecular structures and improved behavior, additional effort is needed towards the development of more and more effective cationic lipids for transfection purposes. With this review, we seek to highlight the great progress made in the design of each and every constituent domain of cationic lipids, that is, the chemical structure of the headgroup, linker and hydrophobic moieties, and on the specific effect on the assembly with nucleic acids. Since the complexity of such systems is known to affect their performances, the role of formulation, stability and phase behavior on the transfection efficiency of such assemblies will be thoroughly discussed. Our objective is to provide a conceptual framework for the development of ever more performing lipid gene delivery vectors.

Induced fusion and aggregation of bacterial outer membrane vesicles: Experimental and theoretical analysis

Recombinantly engineered bacterial outer membrane vesicles (OMVs) are promising vaccine delivery vehicles. The diversity of exogenous antigens delivered by OMVs can be enhanced by induced fusion of OMV populations. To date there are no reports of induced fusion of bacterial OMVs. Here we measure the pH and salt-induced aggregation and fusion of OMVs and analyze the processes against the Derjaguin-Landau-Verwey-Overbeek (DLVO) colloidal stability model. Vesicle aggregation and fusion kinetics were investigated for OMVs isolated from native E. coli (Nissle 1917) and lipopolysaccharide (LPS) modified E. coli (ClearColi) strains to evaluate the effect of lipid type on vesicle aggregation and fusion. Electrolytes and low pHs induced OMV aggregation for both native and modified LPS constructs, approaching a calculated fusion efficiency of ~25% (i.e. ~1/4 of collision events lead to fusion). However, high fusion efficiency was achieved for Nissle OMVs solely with decreased pH as opposed to a combination of low pH and increased divalent counterion concentration for ClearColi OMVs. The lipid composition of the OMVs from Nissle negatively impacted fusion in the presence of electrolytes, causing higher deviations from DLVO-predicted critical coagulation concentrations with monovalent counterions. The outcome of the work is a defined set of conditions under which investigators can induce OMVs to fuse and make various combinations of vesicle compositions.

Critical adsorption of multiple polyelectrolytes onto a nanosphere: splitting the adsorption-desorption transition boundary

Employing extensive Monte Carlo computer simulations, we investigate in detail the properties of multichain adsorption of charged flexible polyelectrolytes (PEs) onto oppositely charged spherical nanoparticles (SNPs). We quantify the conditions of critical adsorption-the phase-separation curve between the adsorbed and desorbed states of the PEs-as a function of the SNP surface-charge density and the concentration of added salt. We study the degree of fluctuations of the PE-SNP electrostatic binding energy, which we use to quantify the emergence of the phase subtransitions, including a series of partially adsorbed PE configurations. We demonstrate how the phase-separation adsorption-desorption boundary shifts and splits into multiple subtransitions at low-salt conditions, thereby generalizing and extending the results for critical adsorption of a single PE onto the SNP. The current findings are relevant for finite concentrations of PEs around the attracting SNP, such as the conditions for PE adsorption onto globular proteins carrying opposite electric charges.

Fabrication and characterization of hollow starch nanoparticles by heterogeneous crystallization of debranched starch in a nanoemulsion system

The development of hollow nanoparticles has attracted widespread interest due to their potential commercial applications. This work aimed to prepare a novel hollow starch nanoparticles (HSNPs) from debranched waxy corn starch (DBS) via an oil-in-water (O/W) emulsion templating method. The effects of different concentrations of DBS on the formation of HSNPs at 4 °C and 25 °C were investigated. The monodispersed HSNPs obtained with 0.5% concentrations of DBS at 25 °C had spherical shapes, ranging between 200 and 800 nm. HSNPs with relative crystallinities of 16.9%-29.7% exhibited V-type or B + V-type structures, which indicated that DBS at low concentrations (0.5%-2.0%) could recrystallize and concomitantly form starch-lipid complexes around emulsion droplets. This novel approach of preparing HSNPs is viable and simple. The developed HSNPs could have great potential for delivering drugs or active ingredients.

Green preparation and characterization of starch nanoparticles using a vacuum cold plasma process combined with ultrasonication treatment

In this study, starch nanoparticles (SNPs) were fabricated via a facile and green method involving a vacuum low-temperature plasma process combined with rapid ultrasonication treatment using waxy corn starch (WCS) and potato starch (PS). Morphology, size, crystalline structure, thermal property, and stability analyses of the SNPs were systematically performed. The obtained SNPs exhibited good uniformity and almost perfect spherical and square shapes. The zeta potential and Fourier transform infrared spectroscopy results confirmed that the SNPs were covered with negative carboxyl groups (zeta potential ranging from -21.8 ± 1.06 to -9.78 ± 0.89 mV). The gelatinization enthalpy of SNPs from PS significantly decreased, changing from 16.63 ± 0.91 to 9.81 ± 0.19 J/g. However, the crystal patterns of SNPs from the WCS and PS after plasma and ultrasonic treatments did not change. The crystallinity of SNPs from PS decreased from 45.2% to 16.5%. This novel approach to preparing SNPs is low cost, simple and green. The developed SNPs could have great potential in the food, biomedical, and material industries.

Enhancing the In Vitro and In Vivo Stabilities of Polymeric Nucleic Acid Delivery Nanosystems

Gene therapy holds great promise for various medical and biomedical applications. Nonviral gene delivery systems formed by cationic polymer and nucleic acids (e.g., polyplexes) have been extensively investigated for targeted gene therapy; however, their in vitro and in vivo stability is affected by both their intrinsic properties such as chemical compositions (e.g., polymer molecular weight and structure, and N/P ratio) and a number of environmental factors (e.g., shear stress during circulation in the bloodstream, interaction with the serum proteins, and physiological ionic strength). In this review, we surveyed the effects of a number of important intrinsic and environmental factors on the stability of polymeric gene delivery systems, and discussed various strategies to enhance the stability of polymeric gene delivery systems, thereby enabling efficient gene delivery into target cells. Future opportunities and challenges of polymeric nucleic acid delivery nanosystems were also briefly discussed.

Overcharging and reentrant condensation of thermoresponsive ionic microgels

We investigated the complexation of thermoresponsive anionic poly(N-isopropylacrylamide) (PNiPAM) microgels and cationic ε-polylysine (ε-PLL) chains. By combining electrophoresis, light scattering, transmission electron microscopy (TEM) and dielectric spectroscopy (DS) we studied the adsorption of ε-PLL onto microgel networks and its effect on the stability of suspensions. We show that the volume phase transition (VPT) of microgels triggers a large polyion adsorption. Two interesting phenomena with unique features occur: a temperature-dependent microgel overcharging and a complex reentrant condensation. The latter may occur at fixed polyion concentration, when temperature is raised above the VPT of microgels, or by increasing the number density of polycations at fixed temperature. TEM and DS measurements unambiguously show that short PLL chains adsorb onto microgels and act as electrostatic glue above the VPT. By performing thermal cycles, we further show that polyion-induced clustering is a quasi-reversible process: within the time of our experiments large clusters form above the VPT and partially re-dissolve as the mixtures are cooled down. Finally we give a proof that the observed phenomenology is purely electrostatic in nature: an increase of the ionic strength gives rise to polyion desorption from the microgel outer shell.

Adsorption of charged macromolecules upon multicomponent responsive surfaces

A predictive model for polyelectrolyte adsorption upon responsive surfaces is presented, decoupling the effect of surface charges and crowders.

Critical adsorption of periodic and random polyampholytes onto charged surfaces

How different are the properties of critical adsorption of polyampholytes and polyelectrolytes onto charged surfaces? How important are the details of polyampholyte charge distribution on the onset of critical adsorption transition? What are the scaling relations governing the dependence of critical surface charge density on salt concentration in the surrounding solution? Here, we employ Metropolis Monte Carlo simulations and uncover the scaling relations for critical adsorption for quenched periodic and random charge distributions along the polyampholyte chains. We also evaluate and discuss the dependence of the adsorbed layer width on solution salinity and details of the charge distribution. We contrast our findings to the known results for polyelectrolyte adsorption onto oppositely charged surfaces, in particular, their dependence on electrolyte concentration.