Preferential adhesion of surface groups of Bacillus subtilis on gibbsite at different ionic strengths and pHs revealed by ATR-FTIR spectroscopy

Effect of Interfacial Charge Distribution in Mixed Charge-Equilibrated SAMs on the Attachment of Pathogens

Zwitterions consisting of positively and negatively charged groups confer hydrophilicity while retaining overall charge neutrality. Both properties were identified as decisive prerequisites for protein-resistant coatings. In this work, we studied the electrostatic contributions to the bacterial attachment process by altering the interfacial charge distribution of the two charges and correlated the results with bacterial adhesion data. Therefore, we generated a set of well-defined, quasi-zwitterionic, charge-equilibrated self-assembled monolayers on gold-coated substrates. As cationic component (11-mercaptoundecyl)-N,N,N-trimethylammonium was combined in a 1:1 ratio with anionic thiols of varying alkyl spacer lengths. By embedding 8-mercaptooctanoic acid, 12-mercaptododecanoic acid, or 16-mercaptohexadecanoic acid, the distance of the anionic moiety to the surface could be varied while maintaining the distance of the cationic moiety to the substrate. Thereby, the interfacial charge distribution and thus the average orientation of the zwitterionic dipoles of the charge-equilibrated mixed self-assembled monolayers have been systematically varied. The resistance against the nonspecific adsorption of the blood-related proteins human serum albumin and fibronectin as well as the attachment-inhibiting effect against the pathogenic bacteria Escherichia coli, Pseudomonas fluorescens, and Bacillus subtilis was tested. It turned out that the change in dipole orientation affected the proteins and the bacteria in different ways with an equilibrated charge distribution within the surface plane being in total the superior one. The results are further discussed based on streaming current data revealing net surface charge of the self-assembled monolayers and the apparent zeta potential of the bacteria to understand to what degree electrostatic interactions contribute to the attachment process.

The trigger mechanisms and the gene regulatory pathways of organic acid secretion during the vanadium-titanium magnetite tailing bioleaching

The long-term mining of vanadium-titanium (V-Ti) magnetite has generated a large accumulation of tailings, which can lead to metal pollution via microbial bioleaching. Current research has focused on the bioleaching of minerals, and a few studies have explored microbial responses to metals only through limited metabolite concentrations. However, the trigger mechanisms of metal release during the V-Ti magnetite tailing bioleaching and key gene regulatory pathways for organic acid metabolism are still unclear. This study screened a bioleaching fungus from the V-Ti magnetite tailing pond groundwater. The fungus promoted tailing dissolution by secreting more organic acids (808.99 mg L-1) than without tailings (671.11 mg L-1). The released metals were responsible for the difference in organic acid metabolism. The tailing-released Fe, Zn, and V were the triggers for the organic acid secretion via up-regulating the functional genes of citric, formic, and succinic acids in the TCA cycle, Methane metabolism, and D-arginine and D-ornithine metabolisms. Fe and V also led to the accumulation of malic acid through up-regulating functional genes during the conversion of phenylalanine, tyrosine, and glycine. Ni and Cu were the inhibitors by up-regulating related functional genes and promoting the conversion of acetyl-CoA to acetoacetyl-CoA, resulting in a decrease in organic acid concentrations. This study demonstrated the triggering metals of bioleaching and fungal gene regulation pathways, which provide a novel strategy for fungi domestication by considering the up-regulating metals to improve the bioleaching efficiency.

Effect of sand minerals on microbially induced carbonate precipitation by denitrification

Soil improvement techniques utilizing the metabolic functions of microorganisms, including microbially induced carbonate precipitation (MICP), have been extensively researched over the past few decades as part of bio-inspired geotechnical engineering research. Given that metabolic reactions in microorganisms produce carbonate minerals, an enhanced understanding of microbial interaction with soils could improve the effectiveness of MICP as a soil improvement technique. Therefore, this study investigated the effects of sands on MICP by denitrification to employ MICP for geotechnical soil improvement. Under the coexistence of natural sand and artificial silica sand, nitrate-reducing bacteria were cultured in a mixed liquid medium with nitrate, acetate, and calcium ions at 37 °C. Nitrate reduction occurred only in the presence of natural sand. However, the lack of chemical weathering of the composed minerals likely prevented the progress of bacterial growth and nitrate reduction in artificial silica sands. For natural sand, artificial chemical weathering by acid wash and ferrihydrite coating of the sand improved bacterial growth and accelerated nitrate reduction. The calcium carbonate formation induced by denitrification was also influenced by the state of the minerals in the soil and the nitrate reduction rate. The observed MICP enhancement is due to the involvement of coexisting secondary minerals like ferrihydrite with large specific surface areas and surface charges, which may improve the reaction efficiency by serving as adsorbents for bacteria and electron donors and acceptors in the solid phases, thereby promoting the precipitation and crystallization of calcium carbonate on the surfaces. This crystal formation in the minerals provides valuable insights for improving sand solidification via MICP. Considering the interactions between the target soil and microorganisms is essential to improving MICP processes for ground improvement.

Micro-interfacial behavior of antibiotic-resistant bacteria and antibiotic resistance genes in the soil environment: A review

Overutilization and misuse of antibiotics in recent decades markedly intensified the rapid proliferation and diffusion of antibiotic resistance genes (ARGs) within the environment, thereby elevating ARGs to the status of a global public health crisis. Recognizing that soil acts as a critical reservoir for ARGs, environmental researchers have made great progress in exploring the sources, distribution, and spread of ARGs in soil. However, the microscopic state and micro-interfacial behavior of ARGs in soil remains inadequately understood. In this study, we reviewed the micro-interfacial behaviors of antibiotic-resistant bacteria (ARB) in soil and porous media, predominantly including migration-deposition, adsorption, and biofilm formation. Meanwhile, adsorption, proliferation, and degradation were identified as the primary micro-interfacial behaviors of ARGs in the soil, with component of soil serving as significant determinant. Our work contributes to the further comprehension of the microstates and processes of ARB and ARGs in the soil environments and offers a theoretical foundation for managing and mitigating the risks associated with ARG contamination.

Aluminum oxyhydroxide-Poly(I:C) combination adjuvant with balanced immunostimulatory potentials for prophylactic vaccines

The development of high-purity antigens promotes the urgent need of novel adjuvant with the capability to trigger high levels of immune response. Polyinosinic-polycytidylic (Poly(I:C)) is a synthetic double-stranded RNA (dsRNA) that can engage Toll-like receptor 3 (TLR3) to initiate immune responses. However, the Poly(I:C)-induced toxicity and inefficient delivery prevent its applications. In our study, combination adjuvants are formulated by aluminum oxyhydroxide nanorods (AlOOH NRs) and Poly(I:C), named Al-Poly(I:C), and the covalent interaction between the two components is further demonstrated. Al-Poly(I:C) mediates enhanced humoral and cellular immune responses in three antigen models, i.e., HBsAg virus-like particles (VLPs), human papilloma virus (HPV) VLPs and varicella-zoster virus (VZV) glycoprotein E (gE). Further mechanistic studies demonstrate that the dose and molecular weight (MW) of Poly(I:C) determine the physicochemical properties and adjuvanticity of the Al-Poly(I:C) combination adjuvants. Al-Poly(I:C) with higher Poly(I:C) dose promotes antigen-bearing dendritic cells (DCs) recruitment and B cells proliferation in lymph nodes. Al-Poly(I:C) formulated with higher MW Poly(I:C) induces higher activation of helper T cells, B cells, and CTLs. This study demonstrates that Al-Poly(I:C) potentiates the humoral and cellular responses in vaccine formulations. It offers insights for adjuvant design to meet the formulation requirements in both prophylactic and therapeutic vaccines.

Exploring the potential of the halotolerant bacterial strain Bacillus subtilis LN8B as an ecofriendly sulfide collector for seawater flotation

AIM

To assess the effectiveness of Bacillus subtilis strain LN8B as a biocollector for recovering pyrite (Py) and chalcopyrite (CPy) in both seawater (Sw) and deionized water (Dw), and to explore the underlying adhesion mechanism in these bioflotation experiments.

MATERIALS AND METHODS

The bioflotation test utilized B. subtilis strain LN8B as the biocollector through microflotation experiments. Additionally, frother methyl isobutyl carbinol (MIBC) and conventional collector potassium amyl xanthate (PAX) were introduced in some experiments. The zeta potential (ZP) and Fourier-transform infrared spectroscopy (FTIR) was employed to explore the adhesion mechanism of Py and CPy interacting with the biocollector in Sw and Dw. The adaptability of the B. subtilis strain to different water types and salinities was assessed through growth curves measuring optical density. Finally, antibiotic susceptibility tests were conducted to evaluate potential risks of the biocollector.

RESULTS

Superior outcomes were observed in Sw where Py and CPy recovery was ∼39.3% ± 7.7% and 41.1% ± 5.8%, respectively, without microorganisms' presence. However, B. subtilis LN8B potentiate Py and CPy recovery, reaching 72.8% ± 4.9% and 84.6% ± 1.5%, respectively. When MIBC was added, only the Py recovery was improved (89.4% ± 3.6%), depicting an adverse effect for CPy (81.8% ± 1.1%). ZP measurements indicated increased mineral surface hydrophobicity when Py and CPy interacted with the biocollector in both Sw and Dw. FTIR revealed the presence of protein-related amide peaks, highlighting the hydrophobic nature of the bacterium. The adaptability of this strain to diverse water types and salinities was assessed, demonstrating remarkable growth versatility. Antibiotic susceptibility tests indicated that B. subtilis LN8B was susceptible to 23 of the 25 antibiotics examined, suggesting it poses minimal environmental risks.

CONCLUSIONS

The study substantiates the biotechnological promise of B. subtilis strain LN8B as an efficient sulfide collector for promoting cleaner mineral production. This effectiveness is attributed to its ability to induce mineral surface hydrophobicity, a result of the distinct characteristics of proteins within its cell wall.

Exploring Enzymatic Conformational Dynamics at Surfaces through μ-FTIR Spectromicroscopy

Immobilization of proteins onto solid supports has critical industrial, technological, and medical applications, and is a daily task in chemical research. Significant conformational rearrangements often occur due to enzyme-surface interactions, and it is of broad interest to develop methods to probe and better understand these molecular-level changes that contribute to the enzyme's catalytic activity and stability. While circular dichroism is a common method for solution-phase conformational study, the application to surface-supported proteins is not trivial and spatial mapping is not viable. On the other hand, a nonlinear laser spectroscopy technique used to analyze surfaces and interfaces is not often found in most laboratories, therefore requiring an alternative and reliable method. Here, we employed high-dimensional data spectromicroscopy analysis in the infrared region (μ-FTIR) to investigate the enzyme's conformational change when adsorbed onto solid matrices, across a ca. 20 mm2 area. Alcohol dehydrogenase (ADH) enzyme was adopted as a model enzyme to interact with CaF2, Au, and Au-thiol model substrates, strategically chosen for mapping the enzyme dynamics on solid surfaces with different polarity/hydrophobicity properties and extendable to other materials. Two-dimensional chemical maps indicate that the enzyme adsorbs with different patterns in which secondary structures dynamically adjust to optimize interprotein and enzyme-surface interactions. The results suggest an experimental approach to identify and map enzyme conformational dynamics onto different solid surfaces across space and provide insights into immobilized protein structure investigations for areas such as biosensing and bioenergy.

Dissolved biochar fractions and solid biochar particles inhibit soil acidification induced by nitrification through different mechanisms

Biochar can inhibit soil acidification by decreasing the H⁺ input from nitrification and improving soil pH buffering capacity (pHBC). However, biochar is a complex material and the roles of its different components in inhibiting soil acidification induced by nitrification remain unclear. To address this knowledge gap, dissolved biochar fractions (DBC) and solid biochar particles (SBC) were separated and mixed thoroughly with an amended Ultisol. Following a urea addition, the soils were subjected to an incubation study. The results showed that both the DBC and SBC inhibited soil acidification by nitrification. The DBC inhibited soil acidification by decreasing the H⁺ input from nitrification, while SBC enhanced the soil pHBC. The DBC from peanut straw biochar (PBC) and rice straw biochar (RBC) decreased the H⁺ release by 16 % and 18 % at the end of incubation. The decrease in H⁺ release was attributed to the inhibition of soil nitrification and net mineralization caused by the toxicity of the phenols in DBC to soil bacteria. The abundance of ammonia-oxidizing bacteria (AOB) and total bacteria decreased by >60 % in the treatments with DBC. The opposite effects were observed in the treatments with SBC. Soil pHBC increased by 7 % and 19 % after the application of solid RBC and PBC particles, respectively. The abundance of carboxyl on the surface of SBC was mainly responsible for the increase in soil pHBC. Generally, the mixed application of DBC and SBC was more effective at inhibiting soil acidification than their individual applications. The negative impacts of dissolved biochar components on soil microorganisms need to be closely monitored.

Oxide- and Silicate-Water Interfaces and Their Roles in Technology and the Environment

Interfacial reactions drive all elemental cycling on Earth and play pivotal roles in human activities such as agriculture, water purification, energy production and storage, environmental contaminant remediation, and nuclear waste repository management. The onset of the 21st century marked the beginning of a more detailed understanding of mineral aqueous interfaces enabled by advances in techniques that use tunable high-flux focused ultrafast laser and X-ray sources to provide near-atomic measurement resolution, as well as by nanofabrication approaches that enable transmission electron microscopy in a liquid cell. This leap into atomic- and nanometer-scale measurements has uncovered scale-dependent phenomena whose reaction thermodynamics, kinetics, and pathways deviate from previous observations made on larger systems. A second key advance is new experimental evidence for what scientists hypothesized but could not test previously, namely, interfacial chemical reactions are frequently driven by "anomalies" or "non-idealities" such as defects, nanoconfinement, and other nontypical chemical structures. Third, progress in computational chemistry has yielded new insights that allow a move beyond simple schematics, leading to a molecular model of these complex interfaces. In combination with surface-sensitive measurements, we have gained knowledge of the interfacial structure and dynamics, including the underlying solid surface and the immediately adjacent water and aqueous ions, enabling a better definition of what constitutes the oxide- and silicate-water interfaces. This critical review discusses how science progresses from understanding ideal solid-water interfaces to more realistic systems, focusing on accomplishments in the last 20 years and identifying challenges and future opportunities for the community to address. We anticipate that the next 20 years will focus on understanding and predicting dynamic transient and reactive structures over greater spatial and temporal ranges as well as systems of greater structural and chemical complexity. Closer collaborations of theoretical and experimental experts across disciplines will continue to be critical to achieving this great aspiration.

Development of the Pseudomonas syringae pv. morsprunorum Biofilm Monitored in Real Time Using Attenuated Total Reflection Fourier Transform Infrared Measurements in a Flow Cell Chamber

Biofilms of sessile Pseudomonas syringae cells formed on top of plant host's leaves or fruits allow surviving harsh environmental conditions (desiccation) and improve their resistance to antibacterial treatments of crops. A better understanding of these biofilms can help minimize their effect on harvests. In the present study, infrared attenuated total reflection spectroscopy coupled with optical and confocal laser scanning microscopy has been applied for the first time to analyze Pseudomonas syringae pathovar morsprunorum biofilm development in real time. The biofilm development was observed within a spectral window 4000-800 cm^-1 under constant flow conditions for 72 h. The kinetics of representative integrated band areas (nucleic acids with polysaccharides at 1141-1006 cm^-1, amino acid side chains with free fatty acids at 1420-1380 cm^-1, proteins at 1580-1490 cm^-1, and lipids with proteins at 2935-2915 cm^-1) were analyzed with regard to the observed biofilm structure and the following P. syringae biofilm developmental stages were attributed: The inoculation phase, washing of weakly attached bacteria closely followed by recolonization of the vacated surface, the restructuration phase, and finally the maturation phase.

Ca2+-Facilitated Adhesion of Bacteria on the Na-Montmorillonite Surface

The adhesion of bacteria on clay surfaces strongly affected their migration and distribution in soil and water. Bacterial adhesion experiments on the Na-montmorillonite (Na-MMT) surface were conducted to determine the role of Na-MMT in the bacterial adhesion process and to prove the validity of the isotherm and kinetic theory for the bacterial surface adhesion in the presence of Ca²⁺ ions. Batch adhesion experiments with bacteria on the Na-MMT surface were carried out with varying time frames, temperatures, bacterial concentrations, and Ca²⁺ ion concentrations. The adhesion capacity of Na-MMT significantly correlated with the Ca²⁺ ion concentration, temperature, time frame, and bacterial concentration when Ca²⁺ ions were present. The adhesion morphology of the bacteria onto the Na-MMT surface, observed through the zeta-potential and atomic force microscopy (AFM), additionally demonstrated that the bacterial adhesion onto the Na-MMT surface was dominated by the nonelectrostatic force.

Contrasting behaviors of pre-ozonation on ceramic membrane biofouling: Early stage vs late stage

Pre-ozonation coupled with ceramic membrane filtration has been widely used to alleviate membrane fouling. However, information on the efficiency and underlying mechanism of pre-ozonation in the evolution of ceramic membrane biofouling is limited. Herein, filtration experiments with a synthesis wastewater containing activated sludge were conducted in a cross-flow system to evaluate the effects of pre-ozonation on ceramic membrane biofouling. Results of flux tests show that pre-ozonation aggravated biofouling at the early stage, but alleviated the biofouling at the late stage. In situ FTIR spectra show that the aggravated biofouling with pre-ozonation was mainly caused by the enhanced complexation between phosphate group from DNA and Al₂O₃ surface and the increased rigid of proteins' structure. At the early stage, more severe pore blockage further substantiated the higher permeate resistance. By contrast, more dead cells were observed on membrane surface at the late stage, indicating the prevention of biofouling development after long-term pre-ozonation. Additionally, the structures and compositions of cake layers at the early and late stages exhibited considerable differences accompanied by the variation in microbial community with the evolution of biofouling. Therefore, this work demonstrates the effectiveness of pre-ozonation in biofouling in long-term operation and provides mechanistic insights into the evolution of biofouling on ceramic membrane.

Engineering the hydroxyl content on aluminum oxyhydroxide nanorod for elucidating the antigen adsorption behavior

The interaction between the aluminum salt-based adjuvants and the antigen in the vaccine formulation is one of the determining factors affecting the immuno-potentiation effect of vaccines. However, it is not clear how the intrinsic properties of the adjuvants could affect this interaction, which limits to benefit the improvement of existing adjuvants and further formulation of new vaccines. Here, we engineered aluminum oxyhydroxide (AlOOH) nanorods and used a variety of antigens including hepatitis B surface antigen (HBsAg), SARS-CoV-2 spike protein receptor-binding domain (RBD), bovine serum albumin (BSA) and ovalbumin (OVA) to identify the key physicochemical properties of adjuvant that determine the antigen adsorption at the nano-bio interface between selected antigen and AlOOH nanorod adjuvant. By using various physicochemical and biophysical characterization methods, it was demonstrated that the surface hydroxyl contents of AlOOH nanorods affected the adsorptive strength of the antigen and their specific surface area determined the adsorptive capacity of the antigen. In addition, surface hydroxyl contents had an impact on the stability of the adsorbed antigen. By engineering the key intrinsic characteristics of aluminum-based adjuvants, the antigen adsorption behavior with the aluminum adjuvant could be regulated. This will facilitate the design of vaccine formulations to optimize the adsorption and stability of the antigen in vaccine.

Inhibition of phosphate sorptions on four soil colloids by two bacteria

Ion sorption on soil and sediment has been reported to be potentially affected by bacteria which may interact both physically and chemically with solid surfaces. However, whether and how bacteria affect the sorption of inorganic phosphate (P) on soil colloids remains poorly known. Here, we comparably investigated the P sorption on four soil colloids (three highly weathered soils including two Oxisols and one Ultisol and one weakly weathered soil Alfisol) and their complexes with Bacillus subtilis and Pseudomonas fluorescens. Batch experiments showed a notable reduction in P sorption on the colloids of highly weathered soils by the two bacteria at varying P concentrations and pHs; whereas that on the colloids of Alfisol appeared to be unaffected by the bacteria. The inhibitory effect was confirmed by both greater decline in P sorption at higher bacteria dosages and the ability of the bacteria to desorb P pre-adsorbed on the colloids. Further evidence was given by isothermal titration calorimetric experiments which revealed an alteration in enthalpy change caused by the bacteria for P sorption on Oxisol but not for that on Alfisol. The B. subtilis was more efficient in suppressing P sorption than the P. fluorescens, indicating a dependence of the inhibition on bacterium type. After association with bacteria, zeta potentials of the soil colloids decreased considerably. The decrease positively correlated with the decline in P sorption, regardless of soil and bacterium types, demonstrating that the increment in negative charges of soil colloids by bacteria probably contributed to the inhibition. In addition, scanning electron microscopic observation and the Derjaguin-Landau-Verwey-Overbeek theory prediction suggested appreciable physical and chemical interactions between the bacteria and the highly weathered soil colloids, which might be another contributor to the inhibition. These findings expand our understandings on how bacteria mobilize legacy P in soils and sediments.

Exposure Pathways of Nontuberculous Mycobacteria Through Soil, Streams, and Groundwater, Hawai'i, USA

Although uncommon, nontuberculous mycobacterial (NTM) pulmonary infection in the Hawaiian Islands has a relatively high incidence and mortality compared to the mainland U.S. As a result, this study examines the possible geological and hydrological pathways by which NTM patients may become infected, including the environmental conditions that may favor growth and transport. Previously suggested infection routes include the inhalation of NTM attached to micro-droplets from infected home plumbing systems and aerosolized dust from garden soil. In this study, we evaluate the possible routes NTM may take from riparian environments, into groundwater, into public water supplies and then into homes. Because NTM are notoriously hydrophobic and prone to attach to surfaces, mineralogy, and surface chemistry of suspended sediment in streams, soils, and rock scrapings suggest that NTM may especially attach to Fe-oxides/hydroxides, and be transported as particles from losing streams to the aquifer on time-scales of minutes to days. Within the aquifer, flow models indicate that water may be drawn into production wells on time scales (months) that permit NTM to survive and enter domestic water supplies. These processes depend on the presence of interconnected fracture networks with sufficient aperture to preclude complete autofiltration. The common occurrence of NTM in and around streams, in addition to wells, implies that the natural and built environments are capable of introducing a source of NTM into domestic water supplies via groundwater withdrawals. This may produce a persistent source of NTM infection to individuals through the presence of NTM-laden biofilms in home plumbing.

Quantitative analysis of the surficial and adhesion properties of the Gram-negative bacterial species Comamonas testosteroni modulated by c-di-GMP

Cyclic diguanylate monophosphate (c-di-GMP) is a ubiquitous intracellular secondary messenger which governs the transition from a bacterial cell's planktonic state to biofilm formation by stimulating the production of a variety of exopolysaccharide material by the bacterial cell. A range of genes involved in c-di-GMP signaling in the Gram-negative species Comamonas testosteroni have been identified previously, yet the physical-chemical properties of the produced extracellular polymeric substances (EPS) and the bacterial adhesion characteristics regulated by c-di-GMP are not well understood. Here, we modulated the in vivo c-di-GMP levels of Comamonas testosteroni WDL7 through diguanylate cyclase (YedQ) and phosphodiesterase (YhjH) gene editing. The strains and their adhesion properties were characterized by Fourier-transform infrared and two-dimensional correlation spectroscopy analysis (FTIR-2D CoS), contact angle and zeta potential measurements, atomic force microscopy (AFM) and extended-Derjaguin-Landau-Verwey-Overbeek (ExDLVO) analysis. Our results show that high c-di-GMP levels promoted the secretion of long-chain hydrophobic and electroneutral extracellular polysaccharides and proteins. The protein molecules on WDL7/pYedQ2 promoted the bacterial self-aggregation and adhesion onto negatively charged surfaces. In contrast, the reduction of intracellular c-di-GMP concentrations resulted in a nearly 80 % decrease in the adhesion of bacterial cells, although little change in the surface hydrophobicity or surface charge properties were observed for these cells relative to the wild type. These results indicate that the reduced adsorption of WDL7/YhjH that we observed may be caused by the flagellum-accelerated mobility at low c-di-GMP concentrations. Taken together, these results improve our mechanistic understanding of the effects of c-di-GMP in controlling bacterial physical-chemical properties and initial biofilm development.

Effect of Schwertmannite Surface Modification by Surfactants on Adhesion of Acidophilic Bacteria

Bacterial cell adhesion onto mineral surfaces is important in a broad spectrum of processes, including bioweathering, bioleaching, and bacterial cell transport in the soil. Despite many research efforts, a detailed explanation is still lacking. This work investigates the role of surface-active compounds, cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS), and pure rhamnolipid (RH), in the process of bacteria attachment on the schwertmannite surface. The surface energy was calculated based on the wettability of the tested systems, and for bacteria it was 54.8 mJ/m2, schwertmannite-SDS 54.4 mJ/m2, schwertmannite-CTAB 55.4 mJ/m2, and schwertmannite-RH 39.7 mJ/m2. The total energy of adhesion estimated based on thermodynamic data was found to be negative, suggesting favorable conditions for adhesion for all examined suspensions. However, including electrostatic interactions allowed for a more precise description of bacterial adhesion under the tested conditions. The theoretical analysis using the extended Derjaguin-Landau-Verwey-Overbeek (DLVO) approach showed a negative value of total adsorption energy only in bacteria-mineral suspensions, where SDS and rhamnolipid were added. The calculated data were in good agreement with experimental results indicating the significance of electrostatic forces in adsorption.

Adhesion of Sphingomonas sp. GY2B onto montmorillonite: A combination study by thermodynamics and the extended DLVO theory

Bacterial adhesion on mineral surface are of fundamental importance in geochemical processes and biogeochemical cycling, such as mineral transformation and clay-mediated biodegradation. In this study, thermodynamics analysis combined with classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory as well as the extended DLVO (XDLVO) theory were employed to investigate the adhesion of the Gram-negative PAH-degrading bacteria Sphingomonas sp. GY2B on montmorillonite (Mt). Scanning electron microscopy (SEM), Fourier transform infrared spectra (FTIR) and X-ray photoelectron spectroscopy (XPS) indicated the affinity of GY2B for Mt, and the experimental results could be described well by pseudo-second-order (R2 = 0.997) and Langmuir model (R2 = 0.995). The thermodynamics analysis revealed the physical nature of bacterial adhesion onto Mt, which was confirmed by the XDLVO theory. The related surface properties (Zeta potential, hydrodynamic diameter and hydrophobicity) at different ionic strength were determined and the interaction energy between Mt and GY2B were also calculated using the DLVO and XDLVO theories in KCl or CaCl2 solution. At low ionic strength (≤ 20 mM), GY2B adhesion onto Mt was primarily driven by long-range DLVO forces (e.g. electrostatic repulsion), while short-range (separation distance < 5 nm) Van der Waals and hydrophobic interactions played more important roles in the bacterial adhesion at higher ionic strength (50-100 mM). In addition, Mt had a better adhesion capacity to bacteria in Ca2+ solution than that in K+ solution, owing to less negative charge and lower energy barrier in mineral-bacteria system in Ca2+ solution. Overall, the adhesion of bacteria onto Mt could be evaluated well on the basis of the XDLVO theory along with thermodynamics analysis. This study provides valuable insights into the clay-mediated microbial remediation of hydrophobic organic contaminants in the environment.

Adhesion mediated transport of bacterial pathogens in saturated sands coated by phyllosilicates and Al-oxides

The current knowledge of bacterial migration is mainly derived from work using bare or Fe-coated quartz sands as porous media. However, mineral coatings on quartz by phyllosilicates and Al-oxides prevail in natural soils, and their effect on bacterial transport remains unknown. Herein, we systematically explored the transport of two bacterial pathogens (Escherichia coli and Staphylococcus aureus) through saturated bare quartz and those coated by kaolinite (KaoQuartz), montmorillonite (MontQuartz) or Al-oxides (AlQuartz) under various solution ionic strength (IS) and pH levels. Elevating IS or decreasing pH discouraged bacterial mobility in all cases, with one exception for the migration of S. aureus through AlQuartz at various IS levels. E. coli showed a higher mobility than S. aureus in all cases. All the three coatings, especially the Al-oxides inhibited bacterial transport through quartz. Overall, the two phyllosilicates-coated sands showed transport behaviors (mobility trends with IS, pH, and cell type) similar to those for the bare quartz which could be explained by the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Nevertheless, for transport within AlQuartz, there were deviations between the observations and the DLVO predictions, probably because of the existence of non-DLVO forces such as hydrophobic and chemical interactions. More importantly, the bacterial retention was found to correlate well with the adhesion regardless of the solution condition and the bacteria and media type, thereby revealing a central role of adhesion in mediating migration through mineral-coated sands. These findings highlight the significance of mineral coating and adhesion in pathogen dissemination in natural soils.