Enhanced antibacterial activity of carbon dots functionalized with ampicillin combined with visible light triggered photodynamic effects

Constructing a highly efficient multifunctional carbon quantum dot platform for the treatment of infectious wounds

Antibiotic resistance poses a huge threat to public health, which has increased the difficulty and transmission of disease treatment, as well as the burden and cost of medical institutions. In response to the current problems and challenges in inflammation control and treatment of bacterial infected wounds, inspired by antibacterial mechanisms based on active elements such as N, S, Cu and tannic acid (TA), a highly efficient multifunctional carbon quantum dot platform was proposed in this study and constructed through their special assembly in a solvothermal reaction system for the treatment of infected wounds. By introducing active elements such as N, S and Cu, this carbon quantum dot platform is endowed with antibacterial properties, while also achieving good angiogenesis promoting performance through the use of ion Cu. Meanwhile, the good antioxidant activity of TA (one of the precursors used) enables this platform to have better immunomodulatory performance in vivo. The research results on the treatment of bacterial infection models indicate that the multifunctional carbon quantum dots obtained can accelerate the healing of infected wounds by inhibiting bacterial infection, regulating immunoreaction, accelerating collagen deposition and promoting angiogenesis. This multifunctional carbon quantum dot platform shows good clinical application prospects in treating bacterial infected wounds. Additionally, the fluorescence characteristics of such carbon dots can be expected to realize visual therapy in the future.

Carbon Dots in Photodynamic/Photothermal Antimicrobial Therapy

Antimicrobial resistance (AMR) presents an escalating global challenge as conventional antibiotic treatments become less effective. In response, photodynamic therapy (PDT) and photothermal therapy (PTT) have emerged as promising alternatives. While rooted in ancient practices, these methods have evolved with modern innovations, particularly through the integration of lasers, refining their efficacy. PDT harnesses photosensitizers to generate reactive oxygen species (ROS), which are detrimental to microbial cells, whereas PTT relies on heat to induce cellular damage. The key to their effectiveness lies in the utilization of photosensitizers, especially when integrated into nano- or micron-scale supports, which amplify ROS production and enhance antimicrobial activity. Over the last decade, carbon dots (CDs) have emerged as a highly promising nanomaterial, attracting increasing attention owing to their distinctive properties and versatile applications, including PDT and PTT. They can not only function as photosensitizers, but also synergistically combine with other photosensitizers to enhance overall efficacy. This review explores the recent advancements in CDs, underscoring their significance and potential in reshaping advanced antimicrobial therapeutics.

Biocidal polymer derived near white light-emitting polymeric carbon particles for antibacterial and bioimaging applications

A growing antimicrobial crisis has increased demand for antimicrobial materials. It has become increasingly popular to convert polymeric macromolecules into polymeric carbon particles (PCP) in order to achieve highly biocompatible materials with unique properties as a result of the ability to synthesize nanomaterials of the right size and add value to existing stable polymers. This work presents the tuning of PCP for antibacterial application by combining a biocidal polymer with one-pot solvothermal synthesis. PCP displayed broad-spectrum antibacterial activity via various mechanisms, including inhibition of bacterial cell walls, ROS generation, and antibiotic resistance. Furthermore, these biocidal PCP were observed to show excitation-independent near-white light emission which on the other hand is generally possible due to mixed sizes, doping, and surface effects. As opposed to the parent biocidal polymer, PCP added ROS-mediated bactericidal activity, increased cytocompatibility, and nanofibers with anti-adhesive effects and potential of imaging bacterial cells.

L-Arginine Doped Carbon Nanodots from Cinnamon Bark for Improved Fluorescent Yeast Cell Imaging

In this study, we present an economical and efficient synthesis method for carbon nanodots (CNDs) derived from cinnamon bark wood powder, with the incorporation of L-arginine as a dopant at varying ratios (Cinnamon : L-Arginine - 1:0.25, 1:0.5) via a hydrothermal reaction. Extensive structural and optical characterization was conducted through techniques such as FTIR, XRD, HR-TEM, DLS, UV-Vis, and PL spectra, providing a comprehensive understanding of the properties of CNDs and doped-CNDs. Quantum yields (QY) were quantified for synthesized materials, contributing to the assessment of their fluorescence efficiency. The synthesized CNDs were successfully applied for bioimaging of yeast cells, employing fluorescence microscopy to visualize their interaction. Remarkably, L-arginine-doped CNDs exhibited enhanced fluorescence, showcasing the influence of the dopant. The nature of these CNDs was rigorously investigated, confirming their biocompatibility. Notably, this work presents a novel approach to synthesizing CNDs from a renewable and sustainable source, cinnamon bark wood powder, while exploring the effects of L-arginine doping on their optical and biological properties. This work not only contributes to the synthesis and characterization of CNDs but also highlights their potential for diverse applications, emphasizing their structural, optical, and biological attributes. The findings underscore the versatility of CNDs derived from cinnamon bark wood powder and their potential for advancing biotechnological and imaging applications.

Poly(Lysine)-Derived Carbon Quantum Dots Conquer Enterococcus faecalis Biofilm-Induced Persistent Endodontic Infections

Introduction

Persistent endodontic infections (PEIs) mediated by bacterial biofilm mainly cause persistent periapical inflammation, resulting in recurrent periapical abscesses and progressive bone destruction. However, conventional root canal disinfectants are highly damaging to the tooth and periodontal tissue and ineffective in treating persistent root canal infections. Antimicrobial materials that are biocompatible with apical tissues and can eliminate PEIs-associated bacteria are urgently needed.

Methods

Here, ε-poly (L-lysine) derived carbon quantum dots (PL-CQDs) are fabricated using pyrolysis to remove PEIs-associated bacterial biofilms.

Results

Due to their ultra-small size, high positive charge, and active reactive oxygen species (ROS) generation capacity, PL-CQDs exhibit highly effective antibacterial activity against Enterococcus faecalis (E. faecalis), which is greatly dependent on PL-CQDs concentrations. 100 µg/mL PL-CQDs could kill E. faecalis in 5 min. Importantly, PL-CQDs effectively achieved a reduction of biofilms in the isolated teeth model, disrupting the dense structure of biofilms. PL-CQDs have acceptable cytocompatibility and hemocompatibility in vitro and good biosafety in vivo.

Discussion

Thus, PL-CQDs provide a new strategy for treating E. faecalis-associated PEIs.

Evaluation of combined carbon dots and ciprofloxacin on the expression level of pslA, pelA, and ppyR genes and biofilm production in ciprofloxacin-resistant Pseudomonas aeruginosa isolates from burn wound infection in Iran

OBJECTIVES

Antimicrobial resistance and biofilm formation are increasingly significant public health concerns. This study aimed to examine the antibacterial and antibiofilm properties of carbon dots (C-dots) alone and in combination with antibiotics against biofilm-forming isolates of Pseudomonas aeruginosa.

METHODS

The antibacterial property of C-dots was investigated by broth microdilution method against ATCC PAO1 and P. aeruginosa clinical isolates. The antibacterial effect of the C-dots and ciprofloxacin combination was investigated using the checkerboard method. The antibiofilm effect of the C-dots alone and its combination with ciprofloxacin was evaluated using the microtiter plate method. Subsequently, the toxicity of each agent was tested on L929 fibroblast cells. In the end, the effects of C-dots on the expression levels of pslA, pelA, and ppyR genes were determined using real-time quantitative PCR.

RESULTS

The combination of C-dots and ciprofloxacin exhibited a synergistic effect. Additionally, this compound substantially decreased bacterial growth (P < 0.0001) and inhibited biofilm formation at MIC (96 µg/mL) and sub-MIC (48 µg/mL) concentrations (P < 0.0053, P < 0.01). After being exposed to C-dots at a concentration of 1mg/mL for 24 hours, the survival rate of L929 cells was 87.3%. The expression of genes pslA, pelA, and ppyR, associated with biofilm formation in P. aeruginosa, was significantly reduced upon exposure to C-dots (P < 0.0023).

CONCLUSIONS

The findings demonstrate a promising new treatment method for infections. Furthermore, reducing the dosage of antibiotics can lead to an improvement in the toxic effects caused by dose-dependent antibiotics and antimicrobial activity.

An Overview of the Potential of Food-Based Carbon Dots for Biomedical Applications

Food-based carbon dots (CDs) hold significant importance across various fields, ranging from biomedical applications to environmental and food industries. These CDs offer unique advantages over traditional carbon nanomaterials, including affordability, biodegradability, ease of operation, and multiple bioactivities. This work aims to provide a comprehensive overview of recent developments in food-based CDs, focusing on their characteristics, properties, therapeutic applications in biomedicine, and safety assessment methods. The review highlights the potential of food-based CDs in biomedical applications, including antibacterial, antifungal, antivirus, anticancer, and anti-immune hyperactivity. Furthermore, current strategies employed for evaluating the safety of food-based CDs have also been reported. In conclusion, this review offers valuable insights into their potential across diverse sectors and underscores the significance of safety assessment measures to facilitate their continued advancement and application.

Iodine functionalized 2,5-dimethoxy-2,5-dihydrofuran (DHFI) crosslinked whey protein-derived carbon nanodots (WCND) for antibacterial application

Whey protein-derived carbon nanodots (WCND) were synthesized using the microwave irradiation method, and its amine-rich surface functionality was crosslinked with covalently bound Iodine functionalized 2,5-dimethoxy-2,5-dihydrofuran (DHFI) to produce WCND-DHFI. The physicochemical characterization of both WCND and WCND-DHFI was performed and compared to comprehend the consequence of iodination on the characteristics of WCND. The suitability of CND in biological environments was evaluated through in vitro cytocompatibility and Chorioallantoic Membrane (CAM) assay, as well as a hemocompatibility study. WCND-DHFI has shown enhanced cell viability against WCND. Further, the antibacterial properties of both CNDs were studied against both gram-positive and gram-negative bacterial strains, representing an enhancement in antibacterial activity after DHFI crosslinking. WCND-DHFI has depicted a stable and prominent bacteriostatic activity for up to 6 h for both strains of bacteria. WCND-DHFI has denoted a 99.996% and 99.999% loss of bacterial viability for gram-positive and negative strains, respectively. Novel surface functionalization portrays an improvement in antibacterial activity. Transmission and scanning electron microscopy represent the cell wall rupturing by the WCND-DHFI, resulting in bacterial death. The ROS-mediated bacteriostatic mechanism of WCND-DHFI has been explored through assessing lipid peroxidation and protein oxidation assay. Moreover, the oxidative damage of DNA also has been explored. WCND-DHFI is performing as a promising cytocompatible and hemocompatible material for antibacterial applications.

Antibacterial functionalized carbon dots and their application in bacterial infections and inflammation

Bacterial infections and inflammation pose a severe threat to human health and the social economy. The existence of super-bacteria and the increasingly severe phenomenon of antibiotic resistance highlight the development of new antibacterial agents. Due to low cytotoxicity, high biocompatibility, and different antibacterial mechanisms from those for antibiotics, functionalized carbon dots (FCDs) promise a new platform for the treatment of bacterial infectious diseases. However, few articles have systematically sorted out the available antibacterial mechanisms for FCDs and their application in the treatment of bacterial inflammation. This review focuses on the available antibacterial mechanisms for FCDs, including covalent and non-covalent interactions, reactive oxygen species, photothermal therapy, and size effect. Meanwhile, the design of antibacterial FCDs is introduced, including surface modification, doping, and combination with other nanomaterials. Furthermore, this review specifically concentrates on the research advances of antibacterial FCDs in the treatment of bacterial inflammation. Finally, the advantages and challenges of applying FCDs in practical antimicrobial applications are discussed.

Synthesis, properties and mechanism of carbon dots-based nano-antibacterial materials

Antibiotics play an important role in the treatment of diseases, but bacterial resistance caused by their widespread and unreasonable use has become an urgent problem in clinical treatment. With the rapid advancement of nanoscience and nanotechnology, the development of nanomedicine has been transformed into a new approach to the problem of bacterial resistance. As a new type of carbon-based nanomaterial, carbon dots (CDs) have attracted the interest of antibacterial researchers due to their ease of preparation, amphiphilicity, facile surface functionalization, and excellent optical properties, among other properties. This article reviewed the synthesis methods and properties of various CDs and their composites in order to highlight the advancements in the field of CDs-based antibacterial agents. Then we focused on the relationship between the principal properties of CDs and the antibacterial mechanism, including the following: (1) the physical damage caused by the small size, amphiphilicity, and surface charge of CDs. (2) Photogenerated electron transfer characteristics of CDs that produce reactive oxygen species (ROS) in themselves or in other compounds. The ability of ROS to oxidize can lead to the lipid peroxidation of cell membranes, as well as damage proteins and DNA. (3) The nano-enzyme properties of CDs can catalyze reactions that generate ROS. (4) Synergistic antibacterial effect of CDs and antibiotics or other nanocomposites. Finally, we look forward to the challenges that CDs-based nanocomposites face in practical antibacterial applications and propose corresponding solutions to further expand the application potential of nanomaterials in the treatment of infectious diseases, particularly drug-resistant bacterial infections.

Recent progress in carbon dots for anti-pathogen applications in oral cavity

Background

Oral microbial infections are one of the most common diseases. Their progress not only results in the irreversible destruction of teeth and other oral tissues but also closely links to oral cancers and systemic diseases. However, traditional treatment against oral infections by antibiotics is not effective enough due to microbial resistance and drug blocking by oral biofilms, along with the passive dilution of the drug on the infection site in the oral environment.

Aim of review

Besides the traditional antibiotic treatment, carbon dots (CDs) recently became an emerging antimicrobial and microbial imaging agent because of their excellent (bio)physicochemical performance. Their application in treating oral infections has received widespread attention, as witnessed by increasing publication in this field. However, to date, there is no comprehensive review available yet to analyze their effectiveness and mechanism. Herein, as a step toward addressing the present gap, this review aims to discuss the recent advances in CDs against diverse oral pathogens and thus propose novel strategies in the treatment of oral microbial infections.

Key scientific concepts of review

In this manuscript, the recent progress of CDs against oral pathogens is summarized for the first time. We highlighted the antimicrobial abilities of CDs in terms of oral planktonic bacteria, intracellular bacteria, oral pathogenic biofilms, and fungi. Next, we introduced their microbial imaging and detection capabilities and proposed the prospects of CDs in early diagnosis of oral infection and pathogen microbiological examination. Lastly, we discussed the perspectives on clinical transformation and the current limitations of CDs in the treatment of oral microbial infections.

Antibacterial Carbon Dots: Mechanisms, Design, and Applications

The increase in antibiotic resistance promotes the situation of developing new antibiotics at the forefront, while the development of non-antibiotic pharmaceuticals is equally significant. In the post-antibiotic era, nanomaterials with high antibacterial efficiency and no drug resistance make them attractive candidates for antibacterial materials. Carbon dots (CDs), as a kind of carbon-based zero-dimensional nanomaterial, are attracting much attention for their multifunctional properties. The abundant surface states, tunable photoexcited states, and excellent photo-electron transfer properties make sterilization of CDs feasible and are gradually emerging in the antibacterial field. This review provides comprehensive insights into the recent development of CDs in the antibacterial field. The topics include mechanisms, design, and optimization processes, and their potential practical applications are also highlighted, such as treatment of bacterial infections, against bacterial biofilms, antibacterial surfaces, food preservation, and bacteria imaging and detection. Meanwhile, the challenges and outlook of CDs in the antibacterial field are discussed and proposed.

Carbon dots: Types, preparation, and their boosted antibacterial activity by photoactivation. Current status and future perspectives

Carbon dots (CDs) correspond to carbon-based materials (CBM) with sizes usually below 10 nm. These nanomaterials exhibit attractive properties such us low toxicity, good stability, and high conductivity, which have promoted their thorough study over the past two decades. The current review describes four types of CDs: carbon quantum dots (CQDs), graphene quantum dots (GQDs), carbon nanodots (CNDs), and carbonized polymers dots (CPDs), together with the state of the art of the main routes for their preparation, either by "top-down" or "bottom-up" approaches. Moreover, among the various usages of CDs within biomedicine, we have focused on their application as a novel class of broad-spectrum antibacterial agents, concretely, owing their photoactivation capability that triggers an enhanced antibacterial property. Our work presents the recent advances in this field addressing CDs, their composites and hybrids, applied as photosensitizers (PS), and photothermal agents (PA) within antibacterial strategies such as photodynamic therapy (PDT), photothermal therapy (PTT), and synchronic PDT/PTT. Furthermore, we discuss the prospects for the possible future development of large-scale preparation of CDs, and the potential for these nanomaterials to be employed in applications to combat other pathogens harmful to human health. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease.

Preparation of Ciprofloxacin-Based Carbon Dots with High Antibacterial Activity

Nowadays, bacterial infections are attracting great attention for the research and development of new antimicrobial agents. As one of the quinolones, ciprofloxacin (CI) has a broad-spectrum, strong antibacterial effect. However, the clinical use of ciprofloxacin is limited by drug resistance. Ciprofloxacin carbon dots (CCDs) with enhanced antibacterial activity and copper-doped ciprofloxacin carbon dots (Cu-CCDs) were synthesized by a simple hydrothermal method. The results of structural analysis and antibacterial experiments show that CCDs and Cu-CCDs have effective antibacterial properties by retaining the active groups of ciprofloxacin (-COOH, C-N, and C-F), and Cu-CCDs doped with copper have a better antibacterial effect. In addition, experiments have shown that Cu-CCDs show excellent antibacterial activity against E. coli and S. aureus and have good biocompatibility, which indicates that they have great prospects in clinical applications. Therefore, novel modified copper CCDs with broad-spectrum antibacterial activity, which can be used as antibacterial nanomaterials for potential applications in the field of antibacterial drugs, were synthesized in this study.

Green synthesis and multifunctional applications of nitrogen-doped carbon quantum dots via one-step hydrothermal carbonization of Curcuma zedoaria

Low-dimensional (<10 nm) semiconductor carbon quantum dots (CQDs) have been widely used in metal ion sensing and bioimaging. Here, we used the renewable resource Curcuma zedoaria as a carbon source and prepared green carbon quantum dots with good water solubility by a hydrothermal method without any chemical reagent. At different pH values (4-6) and high NaCl concentrations, the photoluminescence of the CQDs was very stable, which indicated that they were suitable for a wide range of applications even under harsh conditions. The CQDs exhibited fluorescence quenching in the presence of Fe³⁺ ions, indicating their application potential as fluorescence probes for the sensitive and selective detection of Fe³⁺ ions. The CQDs showed high photostability, low cytotoxicity, and good hemolytic activity, and were successfully applied to bioimaging experiments, i.e. multicolor cell imaging in L-02 (human normal hepatocytes) and CHL (Chinese hamster lung) cells with and without Fe³⁺, as well as wash-free labeling imaging of Staphylococcus aureus and Escherichia coli. The CQDs also showed good free radical scavenging activity and demonstrated a protective effect against photooxidative damage to L-02 cells. These results indicate that CQDs obtained from medicinal herb sources have multiple potential applications in the fields of sensing, bioimaging, and even disease diagnosis.

Primary Amine Functionalized Carbon Dots for Dead and Alive Bacterial Imaging

Small molecular dyes are commonly used for bacterial imaging, but they still meet a bottleneck of biological toxicity and fluorescence photobleaching. Carbon dots have shown high potential for bio-imaging due to their low cost and negligible toxicity and anti-photobleaching. However, there is still large space to enhance the quantum yield of the carbon quantum dots and to clarify their mechanisms of bacterial imaging. Using carbon dots for dyeing alive bacteria is difficult because of the thick density and complicated structure of bacterial cell walls. In this work, both dead or alive bacterial cell imaging can be achieved using the primary amine functionalized carbon dots based on their small size, excellent quantum yield and primary amine functional groups. Four types of carbon quantum dots were prepared and estimated for the bacterial imaging. It was found that the spermine as one of precursors can obviously enhance the quantum yield of carbon dots, which showed a high quantum yield of 66.46% and high fluorescence bleaching-resistance (70% can be maintained upon 3-h-irradiation). Furthermore, a mild modifying method was employed to bound ethylenediamine on the surface of the spermine-carbon dots, which is favorable for staining not only the dead bacterial cells but also the alive ones. Investigations of physical structure and chemical groups indicated the existence of primary amine groups on the surface of spermine-carbon quantum dots (which own a much higher quantum yield) which can stain alive bacterial cells visibly. The imaging mechanism was studied in detail, which provides a preliminary reference for exploring efficient and environment-friendly carbon dots for bacterial imaging.

Broad-Spectrum Antibacterial Activity of Synthesized Carbon Nanodots from d-Glucose

Carbon nanodots, a class of carbon nano-allotropes, have been synthesized through different routes and methods from a wide range of precursors. The selected precursor, synthetic method, and conditions can strongly alter the physicochemical properties of the resulting material and their intended applications. Herein, carbon nanodots (CNDs) have been synthesized from d-glucose by combining pyrolysis and chemical oxidation methods. The effect of the pyrolysis temperature, equivalents of oxidizing agent, and refluxing time were studied on the product and quantum yield. In the optimum conditions (pyrolysis temperature of 300 °C, 4.41 equiv of H2O2, 90 min of reflux) CNDs were obtained with 40% and 3.6% of product and quantum yields, respectively. The obtained CNDs are negatively charged (ζ-potential = -32 mV), excellently dispersed in water, with average diameter of 2.2 nm. Furthermore, ammonium hydroxide (NH4OH) was introduced as dehydrating and/or passivation agent during CNDs synthesis resulting in significant improvement of both product and quantum yields of about 1.5 and 3.76-fold, respectively. The synthesized CNDs showed a broad spectrum of antibacterial activities toward different Gram-positive and Gram-negative bacteria strains. Both synthesized CNDs caused highly colony forming unit reduction (CFU), ranging from 98% to 99.99% for most of the tested bacterial strains. However, CNDs synthesized in the absence of NH4OH, due to a negatively charged surface enriched in oxygenated groups, performed better in zone inhibition and minimum inhibitory concentration. The elevated antibacterial activity of high-oxygen-containing carbon nanodots is directly correlated to their ROS formation ability.

Carbon dot-based therapeutics for combating drug-resistant bacteria and biofilm infections in food preservation

Drug-resistant bacteria are caused by antibiotic abuse and/or biofilm formation and have become a threat to the food industry. Carbon dot (CD)-based nanomaterials are a very promising tools for combating pathogenic and spoilage bacteria, and they possess exceptional and adjustable photoelectric and chemical properties. In view of the rapid development of CD-based nanomaterials and their increasing popularity in the food industry, a comprehensive and updated review is needed to summarize their antimicrobial mechanisms and applications in foods. This review discusses the synthesis of CDs, antimicrobial mechanisms, and their applications for extending the shelf life of food. It includes the synthesis of CDs using small molecules, polymers, and biomass. It also discusses the different antimicrobial mechanisms of CDs and their use as antibacterial agents and carriers/ligands. CD-based materials have proven effective against pathogenic and spoilage bacteria in food by inhibiting planktonic bacteria and biofilms. Optimization of the production parameters of CDs can help them achieve a full-spectral response, but degradability still requires further research.

Fucoidan-derived carbon dots against Enterococcus faecalis biofilm and infected dentinal tubules for the treatment of persistent endodontic infections

Enterococcus faecalis (E. faecalis) biofilm-associated persistent endodontic infections (PEIs) are one of the most common tooth lesions, causing chronic periapical periodontitis, root resorption, and even tooth loss. Clinical root canal disinfectants have the risk of damaging soft tissues (e.g., mucosa and tongue) and teeth in the oral cavity, unsatisfactory to the therapy of PEIs. Nanomaterials with remarkable antibacterial properties and good biocompatibility have been developed as a promising strategy for removing pathogenic bacteria and related biofilm. Herein, carbon dots (CDs) derived from fucoidan (FD) are prepared through a one-pot hydrothermal method for the treatment of PEIs. The prepared FDCDs (7.15 nm) with sulfate groups and fluorescence property are well dispersed and stable in water. Further, it is found that in vitro FDCDs display excellent inhibiting effects on E. faecalis and its biofilm by inducing the formation of intracellular and extracellular reactive oxygen species and altering bacterial permeability. Importantly, the FDCDs penetrated the root canals and dentinal tubules, removing located E. faecalis biofilm. Moreover, the cellular assays show that the developed FDCDs have satisfactory cytocompatibility and promote macrophage recruitment. Thus, the developed FDCDs hold great potential for the management of PEIs.

Photoluminescent inorganic nanoprobe-based pathogen detection

Pathogens are serious threats to human health, and traditional detection techniques suffer from various limitations. The unique optical properties of photoluminescent inorganic nanomaterials, such as high photoluminescence quantum yields, good photostability, and tunable spectrum, make them ideal tools for the detection of pathogens with high specificity and sensitivity. In this review, the design strategies, working mechanisms, and applications of photoluminescent inorganic nanomaterial-based probes in pathogen detection are introduced. In particular, the design and construction of stimuli-responsive nanoprobes and their potential in these fields are highlighted.

Photodynamic Anti-Bacteria by Carbon Dots and Their Nano-Composites

The misuse of many types of broad-spectrum antibiotics leads to increased antimicrobial resistance. As a result, the development of a novel antibacterial agent is essential. Photodynamic antimicrobial chemotherapy (PACT) is becoming more popular due to its advantages in eliminating drug-resistant strains and providing broad-spectrum antibacterial resistance. Carbon dots (CDs), zero-dimensional nanomaterials with diameters smaller than 10 nm, offer a green and cost-effective alternative to PACT photosensitizers. This article reviewed the synthesis methods of antibacterial CDs as well as the recent progress of CDs and their nanocomposites in photodynamic sterilization, focusing on maximizing the bactericidal impact of CDs photosensitizers. This review establishes the base for future CDs development in the PACT field.

Carbon Dots: An Excellent Fluorescent Probe for Contaminant Sensing and Remediation

Pollution-induced degradation of the environment is a serious problem for both developing and developed countries. Existing remediation methods are restricted, necessitating the development of novel remediation technologies. Nanomaterials with unique characteristics have recently been developed for remediation. Quantum dots (QDs) are semiconductor nanoparticles (1-10 nm) with optical and electrical characteristics that differ from bigger particles owing to quantum mechanics, making them intriguing for sensing and remediation applications. Carbon dots (CDs) offer better characteristics than typical QDs, such as, CdSe QDs in terms of contaminant sensing and remediation. Non-toxicity, chemical inertness, photo-induced electron transfer, good biocompatibility, and adjustable photoluminescence behavior are all characteristics of CDs. CDs are frequently made from sustainable raw materials as they are cost-effective, environmentally compactable, and excellent in reducing waste generation. The goal of this review article is to briefly describe CDs fabrication methods, to deeply investigate the criteria and properties of CDs that make them suitable for sensing and remediation of contaminants, and also to highlight recent advances in their use in sensing and remediation of contaminants.

Surface modification of carbon dots with tetraalkylammonium moieties for fine tuning their antibacterial activity

The widespread of bacterial infections including biofilms drives the never-ending quest for new antimicrobial agents. Among the great variety of nanomaterials, carbon dots (CDs) are the most promising antibacterial material, but still require the adjustment of their surface properties for enhanced activity. In this contribution, we report a facile functionalization method of carbon dots (CDs) by tetraalkylammonium moieties using diazonium chemistry to improve their antibacterial activity against Gram-positive and Gram-negative bacteria. CDs were modified by novel diazonium salts bearing tetraalkylammonium moieties (TAA) with different alkyl chains (C2, C4, C9, C12) for the optimization of antibacterial activity. Variation of the alkyl chain allows to reach the significant antibacterial effect for CDs-C9 towards Gram-positive Staphylococcus aureus (S. aureus) (MIC = 3.09 ± 1.10 μg mL-1) and Gram-negative Escherichia coli (E. coli) (MIC = 7.93 ± 0.17 μg mL-1) bacteria. The antibacterial mechanism of CDs-C9 is ascribed to the balance between the positive charge and hydrophobicity of the alkyl chains. TAA moieties are responsible for enhanced adherence on the bacterial cell membrane, its penetration and disturbance of physiological metabolism. CDs-C9 were not effective in the generation of reactive oxygen species excluding the oxidative damage mechanism. In addition, CDs-C9 effectively promoted the antibiofilm treatment of S. aureus and E. coli biofilms outperforming previously-reported CDs in terms of treatment duration and minimal inhibitory concentration. The good biocompatibility of CDs-C9 was demonstrated on mouse fibroblast (NIH/3T3), HeLa and U-87 MG cell lines for concentrations up to 256 μg mL-1. Collectively, our work highlights the correlation between the surface chemistry of CDs and their antimicrobial performance.

Accelerated antibacterial red-carbon dots with photodynamic therapy against multidrug-resistant Acinetobacter baumannii

The emergence of antibiotic resistance in bacteria is a major public-health issue. Synthesis of efficient antibiotic-free material is very important for fighting bacterial infection-related diseases. Herein, red-carbon dots (R-CDs) with a broad range of spectral absorption (350-700 nm) from organic bactericides or intermediates were synthesized through a solvothermal route. The prepared R-CDs not only had intrinsic antibacterial activities, but also could kill multidrug-resistant bacteria (multidrug-resistant Acinetobacter baumannii (MRAB) and multidrug-resistant Staphylococcus aureus (MRSA)) effectively by generating reactive oxygen species. Furthermore, R-CDs could eliminate and inhibit the formation of MRAB biofilms, while conferring few side effects on normal cells. A unique property of R-CDs was demonstrated upon in vivo treatment of antibiotic-sensitive MRAB-induced infected wounds. These data suggested that this novel R-CDs-based strategy might enable the design of next-generation agents to fight drug-resistant bacteria.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material is available for this article at 10.1007/s40843-021-1770-0 and is accessible for authorized users.

Microbial inhibition and biosensing with multifunctional carbon dots: Progress and perspectives

Carbon dots (CDs) and their doped counterparts including nitrogen-doped CDs (N@CDs) have been synthesized by bottom-up or top-down approaches from different precursors. The attractiveness of such emerging 2D‑carbon-based nanosized materials is attributed to their excellent biocompatibility, preparation, aqueous dispersibility, and functionality. The antimicrobial, optical, and electrochemical properties of CDs have been advocated for two important biotechnological applications: bacterial eradication and sensing/biosensing. CDs as well as N@CDs act as antimicrobial agents as their surfaces encompass functional hydroxyl, carboxyl, and amino groups that generate free radicals. As a new class of photoluminescent nanomaterials, CDs can be employed in diversified analytics. CDs with surface carboxyl or amino groups form nanocomposites with nanomaterials or be conjugated with biorecognition molecules toward the development of sensors/biosensors. The deployment of conductive CDs in electrochemical sensing has also increased significantly because of their quantum size, excellent biocompatibility, enzyme-mimicking activity, and high surface area. The review also addresses the ongoing challenges and promises of CDs in pathogenesis and analytics. Perspectives on the future possibilities include the use of CDs in microbial viability assay, wound healing, antiviral therapy, and medical devices.

Advances in the Methods for the Synthesis of Carbon Dots and Their Emerging Applications

Cutting-edge technologies are making inroads into new areas and this remarkable progress has been successfully influenced by the tiny level engineering of carbon dots technology, their synthesis advancement and impressive applications in the field of allied sciences. The advances of science and its conjugation with interdisciplinary fields emerged in carbon dots making, their controlled characterization and applications into faster, cheaper as well as more reliable products in various scientific domains. Thus, a new era in nanotechnology has developed into carbon dots technology. The understanding of the generation process, control on making processes and selected applications of carbon dots such as energy storage, environmental monitoring, catalysis, contaminates detections and complex environmental forensics, drug delivery, drug targeting and other biomedical applications, etc., are among the most promising applications of carbon dots and thus it is a prominent area of research today. In this regard, various types of carbon dot nanomaterials such as oxides, their composites and conjugations, etc., have been garnering significant attention due to their remarkable potential in this prominent area of energy, the environment and technology. Thus, the present paper highlights the role and importance of carbon dots, recent advancements in their synthesis methods, properties and emerging applications.

Fluorescent Carbon Dot-Curcumin Nanocomposites for Remarkable Antibacterial Activity with Synergistic Photodynamic and Photothermal Abilities

Photosensitizer (PS)-mediated photodynamic therapy (PDT) has attracted more and more attention as an alternative to traditional antibiotic therapy. Nevertheless, the limitations of traditional photosensitizers seriously hinder their practical application, as a result, the methods to improve the antibacterial properties of traditional photosensitizers have become a hot topic in the field of photomedicine. Herein, a compound nano-PS system has been constructed with synergistic photodynamic and photothermal (PTT) antibacterial effects, triggered by a dual-wavelength illumination. Fluorescent carbon dots (CDs) were synthesized and employed as carriers for the delivery of curcumin (Cur) to obtain CDs/Cur. Upon combined near-infrared and 405 nm visible dual-wavelength irradiation, CDs/Cur could simultaneously generate ROS and a moderate temperature increase, triggering synergistic antibacterial effects against both Gram-positive and Gram-negative bacteria. The results of scanning electron microscopy and fluorescence confocal imaging showed that the combined effect of CDs/Cur with PDT and PTT caused more serious damage to the cell membrane. In addition, CDs/Cur exhibited low cytotoxicity and negligible hemolytic activity, showing great biocompatibility. Therefore, the construction of CDs/Cur by employing CDs as photosensitizer delivery carriers provides a strategy for the improvement of the antibacterial effect of the photosensitizer and the design of next-generation antibacterial agents in photomedicine.

Enhanced Antibacterial Activity of CuS-BSA/Lysozyme under Near Infrared Light Irradiation

The synthesis of multifunctional photothermal nanoagents for antibiotic loading and release remains a challenging task in nanomedicine. Herein, we investigated a simple, low-cost strategy for the preparation of CuS-BSA nanoparticles (NPs) loaded with a natural enzyme, lysozyme, as an antibacterial drug model under physiological conditions. The successful development of CuS-BSA NPs was confirmed by various characterization tools such as transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). Lysozyme loading onto CuS-BSA NPs was evaluated by UV/vis absorption spectroscopy, Fourier-transform infrared spectroscopy (FTIR), zeta potential, and dynamic light scattering measurements. The CuS-BSA/lysozyme nanocomposite was investigated as an effective means for bacterial elimination of B. subtilis (Gram-positive) and E. coli (Gram-negative), owing to the combined photothermal heating performance of CuS-BSA and lysozyme release under 980 nm (0.7 W cm-2) illumination, which enhances the antibiotic action of the enzyme. Besides the photothermal properties, CuS-BSA/lysozyme nanocomposite possesses photodynamic activity induced by NIR illumination, which further improves its bacterial killing efficiency. The biocompatibility of CuS-BSA and CuS-BSA/Lysozyme was elicited in vitro on HeLa and U-87 MG cancer cell lines, and immortalized human hepatocyte (IHH) cell line. Considering these advantages, CuS-BSA NPs can be used as a suitable drug carrier and hold promise to overcome the limitations of traditional antibiotic therapy.

Advances in Functionalized Photosensitive Polymeric Nanocarriers

The synthesis of light-responsive nanocarriers (LRNs) with a variety of surface functional groups and/or ligands has been intensively explored for space-temporal controlled cargo release. LRNs have been designed on demand for photodynamic-, photothermal-, chemo-, and radiotherapy, protected delivery of bioactive molecules, such as smart drug delivery systems and for theranostic duties. LRNs trigger the release of cargo by a light stimulus. The idea of modifying LRNs with different moieties and ligands search for site-specific cargo delivery imparting stealth effects and/or eliciting specific cellular interactions to improve the nanosystems’ safety and efficacy. This work reviews photoresponsive polymeric nanocarriers and photo-stimulation mechanisms, surface chemistry to link ligands and characterization of the resultant nanosystems. It summarizes the interesting biomedical applications of functionalized photo-controlled nanocarriers, highlighting the current challenges and opportunities of such high-performance photo-triggered delivery systems.

Carbon Dots as an Emergent Class of Antimicrobial Agents

Antimicrobial resistance is a recognized global challenge. Tools for bacterial detection can combat antimicrobial resistance by facilitating evidence-based antibiotic prescribing, thus avoiding their overprescription, which contributes to the spread of resistance. Unfortunately, traditional culture-based identification methods take at least a day, while emerging alternatives are limited by high cost and a requirement for skilled operators. Moreover, photodynamic inactivation of bacteria promoted by photosensitisers could be considered as one of the most promising strategies in the fight against multidrug resistance pathogens. In this context, carbon dots (CDs) have been identified as a promising class of photosensitiser nanomaterials for the specific detection and inactivation of different bacterial species. CDs possess exceptional and tuneable chemical and photoelectric properties that make them excellent candidates for antibacterial theranostic applications, such as great chemical stability, high water solubility, low toxicity and excellent biocompatibility. In this review, we will summarize the most recent advances on the use of CDs as antimicrobial agents, including the most commonly used methodologies for CD and CD/composites syntheses and their antibacterial properties in both in vitro and in vivo models developed in the last 3 years.

Emerging nanomaterials for antibacterial textile fabrication

In recent times, the search for innovative material to fabricate smart textiles has been increasing to satisfy the expectation and needs of the consumers, as the textile material plays a key role in the evolution of human culture. Further, the textile materials provide an excellent environment for the microbes to grow, because of their large surface area and ability to retain moisture. In addition, the growth of harmful bacteria on the textile material not only damages them but also leads to intolerable foul odour and significant danger to public health. In particular, the pathogenic bacteria present in the fabric surface can cause severe skin infections such as skin allergy and irritation via direct human contact and even can lead to heart problems and pneumonia in certain cases. Recently, nanoparticles and nanomaterials play a significant role in textile industries for developing functional smart textiles with self-cleaning, UV-protection, insect repellent, waterproof, anti-static, flame-resistant and antimicrobial-resistant properties. Thus, this review is an overview of various textile fibres that favour bacterial growth and potential antibacterial nanoparticles that can inhibit the growth of bacteria on fabric surfaces. In addition, the probable antibacterial mechanism of nanoparticles and the significance of the fabric surface modification and fabric finishes in improving the long-term antibacterial efficacy of nanoparticle-coated fabrics were also discussed.

Recent Advances on Stimuli-Responsive Combination Therapy against Multidrug-Resistant Bacteria and Biofilm

The widespread occurrence of infections from multidrug-resistant (MDR) bacteria is a global health problem. It has been amplified over the past few years due to the increase in adaptive traits in bacteria and lack of advanced treatment strategies. Because of the low bioavailability and limited penetration at infected sites, the existing antibiotics often fail to resist bacterial growth. Recently, developed stimuli-responsive drug delivery systems and combinatorial therapeutic systems based on nanoparticles, metal-organic frameworks, hydrogels, and organic chromophores offer the ability to improve the therapeutic efficacy of antibiotics by reducing drug resistance and other side effects. These therapeutic systems have been designed with the relevant chemical and physical properties that respond to specific triggers resulting in spatiotemporal controlled release and site-specific transportability. This review highlights the latest development of single and dual/multistimuli-responsive antibiotic delivery systems for combination therapies to treat MDR bacterial infections and biofilm eradication.

Cytotoxicity and cell imaging of six types of carbon nanodots prepared through carbonization and hydrothermal processing of natural plant materials

In this study we prepared six types of carbon nanodots (CNDs) from natural plant materials – through carbonization of two species of bamboo (Bamboo-I, Bamboo-II) and one type of wood (Wood), and through hydrothermal processing of the stem and root of the herb Mahonia oiwakensis Hayata (MO) and of the agricultural waste of two species of pineapple root (PA, PB). The resulting CNDs were spherical with dimensions on the nanoscale (3–7 nm); furthermore, CND-Bamboo I, CND-Wood, CND-Bamboo II, CND-MO, CND-PA, and CND-PB displayed fluorescence quantum yields of 9.63, 12.34, 0.90, 10.86, 0.35, and 0.71%, respectively. X-ray diffraction revealed that the carbon nanostructures possessed somewhat ordered and disordered lattices, as evidenced by broad signals at values of 2θ between 20 and 30°. CND-Bamboo I, CND-Wood, and CND-Bamboo II were obtained in yields of 2–3%; CND-MO, CND-PA, and CND-PB were obtained in yields of 17.64, 9.36, and 22.47%, respectively. Cytotoxicity assays for mouse macrophage RAW264.7 cells treated with the six types of CNDs and a commercial sample of Ag nanoparticles (NPs) revealed that each of our CNDs provided a cell viability of 90% at 2000 μg mL⁻¹, whereas it was only 20% after treatment with the Ag NPs at 62.5 μg mL⁻¹. The six types of CNDs also displayed low cytotoxicity toward human keratinocyte HacaT cells, human MCF-7 breast cancer cells, and HT-29 colon adenocarcinoma cells when treated at 500 μg mL⁻¹. Moreover, confocal microscopic cell imaging revealed that the fluorescent CND-Bamboo I particles were located on the MCF-7 cell membrane and inside the cells after treatment for 6 and 24 h, respectively. We have thoroughly investigated the photoluminescence properties and carbon nanostructures of these highly dispersed CNDs. Because of the facile green synthesis of these six types of CNDs and their sourcing from abundant natural plants, herbs, and agriculture waste, these materials provide a cost-effective method, with low cytotoxicity and stable fluorescence, for biolabeling and for developing cell nanocarriers.

Green nanotechnology of six types of carbon nanodots (CNDs), and their sourcing from abundant natural plants, herbs, and agriculture waste, provides a cost-effective method, with low cytotoxicity and stable fluorescence, for biolabeling and for developing cell nanocarriers.

One-step synthesis of blue-green luminescent carbon dots by a low-temperature rapid method and their high-performance antibacterial effect and bacterial imaging

Due to the global infection problem caused by the abuse of antibiotics, the preparation of novel antibacterial nanomaterials is a key and basic requirement for applications in antibacterial and bacterial imaging fields. This paper reports the one-step preparation of blue-green-emitting carbon dots (CDs) under low temperature (80 °C) with glucose as the carbon source, citric acid as the dehydrating agent, and polyethyleneimine as the nitrogen source. Through inhibition zone tests and minimum inhibitory concentration (MIC) experiments, the inhibitory abilities of prepared CDs against various microorganisms, including gram-positive bacteria, gram-negative bacteria and fungi, were compared. It is worth mentioning that the MIC of CDs against Staphylococcus aureus reaches 4.7 μg ml^-1, and the CDs exhibit excellent biocompatibility. Moreover, studies on visual-treatment therapy, in which infection treatment can be performed at the same time as bacterial imaging, with the prepared functional antibacterial CDs based on fluorescence confocal imaging would be beneficial to their promising future in medical and biological fields.

Carbon dots-releasing hydrogels with antibacterial activity, high biocompatibility, and fluorescence performance as candidate materials for wound healing

Antibacterial hydrogels have received attention for preventing infections and for their biomedical applications. However, traditional antibiotics-containing and metal nanoparticle-containing hydrogels often cause bacterial resistance, exhibit low biocompatibility, and lack real-time monitoring capability. Here, a fluorescent antibacterial hydrogel with antibacterial ability, excellent optical performance, and high biocompatibility was developed based on cationic carbon dots (CDs), pectin, and acrylic acid triggered construction of the hydrogel network by cross-linker. The antibacterial high-cationic CDs (+51.20 mV) were synthesized by a simple hydrothermal method and released from hydrogel in response to broken hydrogen bonds due to a change in the ambient environment caused by the growing bacteria. The hydrogel showed long-term potent broad-spectrum antibacterial ability (even drug-resistant bacteria) due to the bacterial membrane seriously damaged by the released CDs. The inhibitory capability of this hydrogel was 108.5-fold higher than the other hydrogel. After implantation or incubation with cells, no obvious cytotoxicity or tissue toxicity was observed for the antibacterial hydrogel. This hydrogel enhanced both the application of CDs in vivo and the biosafety of hydrogel. Furthermore, the multicolor fluorescence emission produced by CD provides a potential idea for the development of dual-function hydrogels with in situ monitoring and prevention of bacterial infections to treat wounds.

Combination therapy of biogenic C-dots and lysozyme for enhanced antibacterial and antibiofilm activity

Nearly 80% of human chronic infections are caused due to bacterial biofilm formation. The increased resistance against the conventional antimicrobial agents makes it difficult to treat the biofilm-related infections. The antibiotics resistance developed by planktonic cells has also become a major threat for human. Therefore, we have attempted here to develop an effective alternative strategy to overcome the issues of antibiotics resistance of bacteria. Upon synthesis, biogenic C-dots were combined with lysozymes which were further encapsulated into chitosan nanocarrier to form C-dots carrier (CDC). The as-synthesized C-dots were found irregular shaped and the average size of C-dots and CDC were 8 ± 2 nm and 450 ± 50 nm, respectively. To ensure secure and targeted delivery of C-dots and lysozyme we have employed chitosan, a biodegradable and natural biopolymer, as a delivery system. The study of time-dependent bacterial growth and flow cytometry analysis demonstrated that CDC can exhibit a synergistic bactericidal activity against the antibiotics resistant recombinant E. coli cells. Further, we have shown that the CDC could be a potent agent for both prevention of biofilm formation and eradication of preformed biofilm. In addition, we have observed that our drug delivery system is hemocompatible in nature making it suitable for in vivo applications. Therefore, we believe that the combination therapy of C-dots and lysozyme may be used as an excellent antibacterial and antibiofilm strategy.

Antibacterial activity of positively charged carbon quantum dots without detectable resistance for wound healing with mixed bacteria infection

Widespread bacterial infection and the spread of antibiotic resistance exhibit increasing threat to the public and thus require new antibacterial strategies. Carbon quantum dots (CQDs) have been extensively investigated to play fluorescent, catalytic roles and even potential biomedical functions containing sterilization. However, synthetic understanding of the interaction of CQDs and bacteria, the exhibition of antibacterial ability, and the risk of resistance evolution remain lacking. Herein, a simple one-pot method was fabricated to prepare positively charged CQDs (PC-CQDs) as a broad-spectrum antibacterial agent. PC-CQDs possessed effective antibacterial activity against all tested Gram-positive, Gram-negative, and drug-resistant bacteria. Investigation of the antibacterial mechanism of PC-CQDs indicated that small-sized PC-CQDs functionalized with -NH₂ and -NH induced strong adherence behavior on the bacterial cell membrane. Moreover, the entry of PC-CQDs caused conformational changes in the genes and generation of reactive oxygen species in the bacteria. Safety evaluation illustrated that PC-CQDs did not trigger detectable drug resistance or hemolysis. Furthermore, PC-CQDs effectively promoted the antibacterial treatment of mixed Staphylococcus aureus and Escherichia coli infected wound in rats with low in vivo toxicity. These results suggested that PC-CQDs are a potential antibacterial candidate for real wound healing applications in complex bacterial infections and even resistant bacteria-caused infections.

Antimicrobial carbon nanodots: photodynamic inactivation and dark antimicrobial effects on bacteria by brominated carbon nanodots

The evolving threat of antibiotic resistance development in pathogenic bacteria necessitates the continued cultivation of new technologies and agents to mitigate associated negative health impacts globally. It is no surprise that infection prevention and control are cited by the Centers for Disease Control and Prevention (CDC) as two routes for combating this dangerous trend. One technology that has gained great research interest is antimicrobial photodynamic inactivation of bacteria, or APDI. This technique permits controllable activation of antimicrobial effects by combining specific light excitation with the photodynamic properties of a photosensitizer; when activated, the photosensitizer generates reactive oxygen species (ROS) from molecular oxygen via either a type I (electron transfer) or type II (energy transfer) pathway. These species subsequently inflict oxidative damage on nearby bacteria, resulting in suppressed growth and cell death. To date, small molecule photosensitizers have been developed, yet the scalability of these as widespread sterilization agents is limited due to complex and costly synthetic procedures. Herein we report the use of brominated carbon nanodots (BrCND) as new photosensitizers for APDI. These combustion byproducts are easily and inexpensively collected; incorporation of bromine into the nanodot permits photosensitization effects that are not inherent to the carbon nanodot structure alone-a consequence of triplet character gained by the heavy atom effect. BrCND demonstrate both type I and type II photosensitization under UV-A irradiation, and furthermore are shown to have significant antimicrobial effects against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus and Listeria monocytogenes as well. A mechanism of "dark" toxicity is additionally reported; the pH-triggered release of reactive nitrogen species is detected from a carbon nanodot structure for the first time. The results described present the BrCND structure as a competitive new antimicrobial agent for controllable sterilization of bacteria.

A novel multifunctional NCQDs-based injectable self-crosslinking and in situ forming hydrogel as an innovative stimuli responsive smart drug delivery system for cancer therapy

In this work, we offer an easy approach to develop a novel injectable, pH sensitive and in situ smart drug delivery system for use in cancer treatments. The developed hydrogels containing nitrogen doped carbon quantum dots (NCQD), doxorubicin (Dox) and hydroxyapatite (HA) were obtained by in situ self-crosslinking. Characterization of the synthesized nanomaterials, interactions between NCQD/Dox/HA hydrogel structure were carried out by TEM, FESEM, EDS, FTIR, XPS, XRD, Zeta potential, DLS, UV-Vis, SEM, gelation time, injectability and DIST measurements. In addition, antibacterial evaluation which was performed against Staphylococcus aureus realized that HA compound significantly increased the antibacterial activity of the hybrid hydrogel. The anticancer drug release to the tumor cell microenvironment with a pH of 5.5 was found to be higher compared to the release in the normal physiological range of pH 6.5 and 7.4. MTT and live/dead assays were also performed using L929 fibroblastic cell lines to investigate the cytotoxic behavior of NCQDs, and NCQDs/Dox/HA hydrogels. Furthermore, the NCQDs/Dox/HA hydrogel could transport Dox within a MCF-7 cancerous cell at specifically acidic pH. Additionally, imaging of cell line was observed using NCQDs and their use in imaging applications and multicolor features in the living cell system were evaluated. The overall study showed that in situ formed NCQDs/Dox/HA hydrogel represented a novel and multifunctional smart injectable controlled-release drug delivery system with great potential, which may be considered as an attractive minimal invasive smart material for future intelligent delivery of chemotherapeutic drug and disease therapy applications.

Nanotheranostics: A Possible Solution for Drug-Resistant Staphylococcus aureus and their Biofilms?

Staphylococcus aureus is a notorious pathogen that colonizes implants (orthopedic and breast implants) and wounds with a vicious resistance to antibiotic therapy. Methicillin-resistant S. aureus (MRSA) is a catastrophe mainly restricted to hospitals and emerged to community reservoirs, acquiring resistance and forming biofilms. Treating biofilms is problematic except via implant removal or wound debridement. Nanoparticles (NPs) and nanofibers could combat superbugs and biofilms and rapidly diagnose MRSA. Nanotheranostics combine diagnostics and therapeutics into a single agent. This comprehensive review is interpretative, utilizing mainly recent literature (since 2016) besides the older remarkable studies sourced via Google Scholar and PubMed. We unravel the molecular S. aureus resistance and complex biofilm. The diagnostic properties and detailed antibacterial and antibiofilm NP mechanisms are elucidated in exciting stories. We highlight the challenges of bacterial infections nanotheranostics. Finally, we discuss the literature and provide "three action appraisals". (i) The first appraisal consists of preventive actions (two wings), avoiding unnecessary hospital visits, hand hygiene, and legislations against over-the-counter antibiotics as the general preventive wing. Our second recommended preventive wing includes preventing the adverse side effects of the NPs from resistance and toxicity by establishing standard testing procedures. These standard procedures should provide breakpoints of bacteria's susceptibility to NPs and a thorough toxicological examination of every single batch of synthesized NPs. (ii) The second appraisal includes theranostic actions, using nanotheranostics to diagnose and treat MRSA, such as what we call "multifunctional theranostic nanofibers. (iii) The third action appraisal consists of collaborative actions.

Superior Properties and Biomedical Applications of Microorganism-Derived Fluorescent Quantum Dots

Quantum dots (QDs) are fluorescent nanocrystals with superb photo-physical properties. Applications of QDs have been exponentially increased during the past decade. They can be employed in several disciplines, including biological, optical, biomedical, engineering, and energy applications. This review highlights the structural composition and distinctive features of QDs, such as resistance to photo-bleaching, wide range of excitations, and size-dependent light emission features. Physical and chemical preparation of QDs have prominent downsides, including high costs, regeneration of hazardous byproducts, and use of external noxious chemicals for capping and stabilization purposes. To eliminate the demerits of these methods, an emphasis on the latest progress of microbial synthesis of QDs by bacteria, yeast, and fungi is introduced. Some of the biomedical applications of QDs are overviewed as well, such as tumor and microRNA detection, drug delivery, photodynamic therapy, and microbial labeling. Challenges facing the microbial fabrication of QDs are discussed with the future prospects to fully maximize the yield of QDs by elucidating the key enzymes intermediating the nucleation and growth of QDs. Exploration of the distribution and mode of action of QDs is required to promote their biomedical applications.

Carbon Nanodots in Photodynamic Antimicrobial Therapy: A Review

Antibiotic resistance development in bacteria is an ever-increasing global health concern as new resistant strains and/or resistance mechanisms emerge each day, out-pacing the discovery of novel antibiotics. Increasingly, research focuses on alternate techniques, such as antimicrobial photodynamic therapy (APDT) or photocatalytic disinfection, to combat pathogens even before infection occurs. Small molecule "photosensitizers" have been developed to date for this application, using light energy to inflict damage and death on nearby pathogens via the generation of reactive oxygen species (ROS). These molecular agents are frequently limited in widespread application by synthetic expense and complexity. Carbon dots, or fluorescent, quasi-spherical nanoparticle structures, provide an inexpensive and "green" solution for a new class of APDT photosensitizers. To date, reviews have examined the overall antimicrobial properties of carbon dot structures. Herein we provide a focused review on the recent progress for carbon nanodots in photodynamic disinfection, highlighting select studies of carbon dots as intrinsic photosensitizers, structural tuning strategies for optimization, and their use in hybrid disinfection systems and materials. Limitations and challenges are also discussed, and contemporary experimental strategies presented. This review provides a focused foundation for which APDT using carbon dots may be expanded in future research, ultimately on a global scale.

Functionalized carbon-based nanomaterials and quantum dots with antibacterial activity: a review

INTRODUCTION

Emergence of antibiotic resistance in bacteria is a complicated issue, especially when treating infectious immunodeficiency related diseases. In recent years, when compared to bulk materials, nanomaterials (NMs) with specific antibacterial activities have played a novel role in treating bacterial infections. Among NMs, quantum dots (QDs), specifically carbon containing QDs including graphene oxide QD (GOQD), graphene QD (GQD), and carbon QD (CQD), have demonstrated bacteriostatic and bactericidal activities via photodynamic (PD) effects against antibiotic resistant bacteria under a certain wavelength of light.

AREA COVERED

In this mini-review, recent advances and challenges related to antibacterial and biocompatibility activities of modified GQD, GOQD, CQD, and carbon nanotubes (CNTs) are discussed.

EXPERT OPINION

Lower stability and biocompatibility of QDs at higher doses in physiological conditions are major disadvantages. In this regard, functionalization of these QDs can result in appropriate bactericidal, biocompatibility, and biodegradability properties. In the case of CNTs including single-wall carbon nanotube (SWCNTs) and multiwall carbon nanotube (MWCNTs), aspect ratio (AR) is a determinant factor for the antibacterial value. Moreover, MWCNTs show a lower antibacterial ability compared to SWCNTs, which can be improved by modifying their surface.

Combating Antibiotic-Resistant Gram-Negative Bacteria Strains with Tetracycline-Conjugated Carbon Nanoparticles

Nontoxic carbon nanoparticle samples prepared by both bottom-up and top-down approaches do not inhibit Gram-negative bacterial growth, indicating excellent biocompatibilities. However, cell growth inhibitory efficacies increase considerably when the carbon nanoparticles are conjugated with the antibiotic tetracycline. In tetracycline-resistant bacteria, these efficacies can approach tenfold higher activities when compared to tetracycline alone. No structural abnormality such as membrane disruptions is evident in the tested bacterial strains; this is in contrast with other nanocarbon systems such as graphene oxides, carbon nanotubes, and amine-functionalized carbon nanoparticles which do exhibit membrane disruptions. In comparison, the tetracycline-conjugated carbon nanoparticles induce membrane perturbations (but not membrane disruptions), inhibiting bacterial efflux mechanisms. It is proposed that when tetracycline is conjugated to the surface of carbon nanoparticles, it functions to direct the nanoparticles to membrane-associated tetracycline efflux pumps, thereby blocking and subsequently inhibiting their function. The conjugation between biocompatible carbon nanoparticles and subtherapeutic but well-established antibiotic molecules may provide hybrid antibiotic assembly strategies resulting in effective multidrug efflux inhibition for combating antibiotic resistance.