Antimicrobial and biocompatible fluorescent hydroxyapatite-chitosan nanocomposite films for biomedical applications

Polysaccharide Hydroxyapatite (Nano)composites and Their Biomedical Applications: An Overview of Recent Years

Hydroxyapatite can combine with polysaccharide originating biomaterials with special applications in the biomedical field. In this review, the synthesis of (nano)composites is discussed, focusing on natural polysaccharides such as alginate, chitosan, and pectin. In this way, advances in recent years in the development of preparing materials are revised and discussed. Therefore, an overview of the recent synthesis and applications of polyssacharides@hydroxyapatites is presented. Several studies based on chitosan@hydroxyapatite combined with other inorganic matrices are highlighted, while pectin@hydroxyapatite is present in a smaller number of reports. Biomedical applications as drug carriers, adsorbents, and bone implants are discussed, combining their dependence with the nature of interactions on the molecular scale and the type of polysaccharides used, which is a relevant aspect to be explored.

Te4+ and Er3+ doped ZrO2 nanoparticles with enhanced photocatalytic, antibacterial activity and dielectric properties: A next generation of multifunctional material

Amid rising water contamination from industrial sources, tackling toxic dyes and pathogens is critical. Photocatalysis offers a cost-effective and eco-friendly solution to this pressing challenges. Herein, we synthesized Te4+ and Er3+ doped ZrO2 photocatalysts through hydrothermal method and investigated their efficacy in degrading Congo red (CR) and pathogens under visible light. XRD and Raman Spectroscopy confirm monoclinic and tetragonal mixed-phases without any impurities. Doping-induced defects, reduced crystalline diameter, high surface area, modified bandgap (2.95 eV), photoluminescence quenching, coupled with interfacial polarization, contribute to EZO's excellent dielectric response (1.149 × 106), for achieving remarkable photocatalytic activity, verified by photoelectrochemical measurements, LC-MS and phytotoxicity analysis. Under optimal conditions, EZO achieves 99% CR degradation within 100 min (TOC 79.9%), surpassing ZO (77%) and TZO (84%). Catalyst dosages, dye concentrations, and solution pH effect on EZO's photocatalytic performance are systematically assessed. Scavenging experiment emphasized the pivotal role of · OH in CR degradation with 96.4% efficiency after 4 cycles, affirming its remarkable stability. Moreover, EZO demonstrates ROS-mediated antibacterial activity against E. faecalis and E. coli bacteria under visible light, achieving >97% and >94% inhibition rate with an inhibition zone > 3 mm. Hence, the nanoparticle's dual action offers a practical solution for treating contaminated wastewater, ensuring safe irrigation.

Incorporating mesoporous SiO2-HA particles into chitosan/hydroxyapatite scaffolds: A comprehensive evaluation of bioactivity and biocompatibility

In this work, composite scaffolds with various composition ratios of chitosan (CS), hydroxyapatite (HA), and mesoporous SiO2 particles co-synthesized with hydroxyapatite (SiO2-HA) were fabricated via the freeze-drying method for bone tissue engineering applications. Morphological studies showed that adding mesoporous particles resulted in a structure with a more uniformly porous geometry, subsequently leading to reduced biodegradation rates and water absorption in the scaffolds. The bioactivity results showed the introduction of mesoporous particles notably enhanced the coverage of the scaffold surface with apatite films. Moreover, biocompatibility assessments using sarcoma osteogenic cell line (SAOS-2) highlighted mesoporous particles' positive impact on cell adhesion and growth. The fluorescence images showed spindle-shaped cells with a greater number and normal cell nuclei for the scaffolds containing mesoporous SiO2-HA particles. The MTT cytotoxicity results indicated that the scaffolds containing mesoporous particles showed approximately 25 % higher cell survival more than single chitosan-based ones. What is more, the mesoporous-containing scaffolds occurred to have the best alkaline phosphatase test (ALP) activity among all scaffolds. It is important to add that CS/HA/mesoporous SiO2-HA scaffolds including SAOS-2 cells showed no sign of either early or late apoptosis. These findings affirm the potential of CS/HA/mesoporous SiO2-HA scaffolds as promising implants for bone tissue engineering.

Design and evaluation of 32P-labeled hydroxyapatite nanoparticles for bone tumor therapy

The clinical diagnosis and treatment of malignant bone tumors are still major clinical challenges due to their high incidence are difficulty. Targeted therapies have become a critical approach to treat bone tumors. In recent years, radiopharmaceuticals have been used widely and have shown potent and efficient results in treating bone tumors, among which ³²P and the labeled radiopharmaceuticals play an essential role. In this study, the ³²P-labeled hydroxyapatite (HA) was prepared through chemical synthesis (³²P-Hap) and physical adsorption (³²P-doped-Hap). The in vitro stability of ³²P-labeled HA was analyzed to assess the superiority of the new-found chemical synthesis. The radiolabeling yield and stability of chemical synthesis (97.6 ± 0.5%) were significantly improved compared with physical adsorption (92.7 ± 0.4%). Furthermore, the CT results corroborate that ³²P-Hap (100 μCi) +DOX group has the highest tumor suppression rate and can effectively reduce bone destruction. The results corroborate the effectiveness of the chemical synthesis and validate the application of ³²P-Hap in bone tumors. Therefore, ³²P-Hap (100 μCi) + DOX may be an effective strategy for bone metastasis treatments.

Complex Evaluation of Nanocomposite-Based Hydroxyapatite for Biomedical Applications

A magnesium-doped hydroxyapatite in chitosan matrix (MgHApC) sample was developed as a potential platform for numerous applications in the pharmaceutical, medical, and food industries. Magnesium-doped hydroxyapatite suspensions in the chitosan matrix were obtained by the coprecipitation technique. The surface shape and morphological features were determined by scanning electron microscopy (SEM). The hydrodynamic diameter of the suspended particles was determined by Dynamic light scattering (DLS) measurements. The stability of MgHApC suspensions was evaluated by ultrasonic measurements. The hydrodynamic diameter of the MgHApC particles in suspension was 29.5 nm. The diameter of MgHApC particles calculated from SEM was 12.5 ± 2 nm. Following the SEM observations, it was seen that the MgHApC particles have a spherical shape. The Fourier-transform infrared spectroscopy (FTIR) studies conducted on MgHApC proved the presence of chitosan and hydroxyapatite in the studied specimens. In vitro antimicrobial assays were performed on Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 25923, Pseudomonas aeruginosa ATCC 27853, and Candida albicans ATCC 10231 microbial strains. The antimicrobial experiments showed that MgHApC exhibited very good antimicrobial properties against all the tested microorganisms. More than that, the results of the in vitro studies revealed that the antimicrobial properties of the samples depend on the incubation time. The evaluation of the sample's cytotoxicity was performed using the human colon cancer (HCT-8) cell line. Our results suggested the great potential of MgHApC to be used in future applications in the field of biomedical applications (e.g., dentistry, orthopedics, etc.).

Latest Research of Doped Hydroxyapatite for Bone Tissue Engineering

Bone tissue engineering has attracted great interest in the last few years, as the frequency of tissue-damaging or degenerative diseases has increased exponentially. To obtain an ideal treatment solution, researchers have focused on the development of optimum biomaterials to be applied for the enhancement of bioactivity and the regeneration process, which are necessary to support the proper healing process of osseous tissues. In this regard, hydroxyapatite (HA) has been the most widely used material in the biomedical field due to its great biocompatibility and similarity with the native apatite from the human bone. However, HA still presents some deficiencies related to its mechanical properties, which are essential for HA to be applied in load-bearing applications. Bioactivity is another vital property of HA and is necessary to further improve regeneration and antibacterial activity. These drawbacks can be solved by doping the material with trace elements, adapting the properties of the material, and, finally, sustaining bone regeneration without the occurrence of implant failure. Considering these aspects, in this review, we have presented some general information about HA properties, synthesis methods, applications, and the necessity for the addition of doping ions into its structure. Also, we have presented their influence on the properties of HA, as well as the latest applications of doped materials in the biomedical field.

Nacre-mimetic cerium-doped nano-hydroxyapatite/chitosan layered composite scaffolds regulate bone regeneration via OPG/RANKL signaling pathway

Autogenous bone grafting has long been considered the gold standard for treating critical bone defects. However, its use is plagued by numerous drawbacks, such as limited supply, donor site morbidity, and restricted use for giant-sized defects. For this reason, there is an increasing need for effective bone substitutes to treat these defects. Mollusk nacre is a natural structure with outstanding mechanical property due to its notable "brick-and-mortar" architecture. Inspired by the nacre architecture, our team designed and fabricated a nacre-mimetic cerium-doped layered nano-hydroxyapatite/chitosan layered composite scaffold (CeHA/CS). Hydroxyapatite can provide a certain strength to the material like a brick. And as a polymer material, chitosan can slow down the force when the material is impacted, like an adhesive. As seen in natural nacre, the combination of these inorganic and organic components results in remarkable tensile strength and fracture toughness. Cerium ions have been demonstrated exceptional anti-osteoclastogenesis capabilities. Our scaffold featured a distinct layered HA/CS composite structure with intervals ranging from 50 to 200 μm, which provided a conducive environment for human bone marrow mesenchymal stem cell (hBMSC) adhesion and proliferation, allowing for in situ growth of newly formed bone tissue. In vitro, Western-blot and qPCR analyses showed that the CeHA/CS layered composite scaffolds significantly promoted the osteogenic process by upregulating the expressions of osteogenic-related genes such as RUNX2, OCN, and COL1, while inhibiting osteoclast differentiation, as indicated by reduced TRAP-positive osteoclasts and decreased bone resorption. In vivo, calvarial defects in rats demonstrated that the layered CeHA/CS scaffolds significantly accelerated bone regeneration at the defect site, and immunofluorescence indicated a lowered RANKL/OPG ratio. Overall, our results demonstrate that CeHA/CS scaffolds offer a promising platform for bone regeneration in critical defect management, as they promote osteogenesis and inhibit osteoclast activation.

Hierarchical and urchin-like chitosan/hydroxyapatite microspheres as drug-laden cell carriers

Biopolymer/hydroxyapatite (HAp) composites are one type of the most promising materials for a variety of biomedical applications. In this study, hierarchical and urchin-like chitosan/HAp nanowire (HU-CS/HAp NW) microspheres were for the first time synthesized by in situ hydrothermal treatment of chitosan/HAp (CS/HAp) microspheres in the acetic acid solution. The results indicate that HU-CS/HAp NW microspheres were spherical in morphology with a diameter of 100-300 μm. Their surface was mainly constructed by numerous HAp NWs with the diameter of 80-120 nm and showed a hierarchical and urchin-like nanofibrous architecture. It was found that the acidic hydrothermal treatment caused an in situ conversion of HAp NPs to HAp NWs. In vitro biocompatible evaluation indicates that HU-CS/HAp NW microspheres showed an enhanced cell attachment and proliferation due to the presence of hierarchical and urchin-like architecture. Furthermore, HU-CS/HAp NW microspheres showed a good adsorption capacity for tetracycline hydrochloride (model drug, one of the most representative antibiotics) with a higher adsorption capacity than CS/HAp microspheres and well maintained their antibacterial efficacy to inhibit the growth of bacteria: Escherichia coli and Staphylococcus aureus. Thus, the present HU-CS/HAp NW microspheres would be applicable as novel drug-laden cell carriers.

Bioactive Nanocomposite Microsponges for Effective Reconstruction of Critical-Sized Calvarial Defects in Rat Model

Introduction

Micro-sized sponge particulates have attracted extensive attention because of their potential to overcome the intrinsic limitations of conventional monolithic scaffolds in tissue engineering. Bioactive nanocomposite microsponges are regarded as potential bone substitute materials for bone regeneration.

Methods

Based on a combination of microfluidic emulsion with further freezing and in situ thawing, chitosan (CS)-hydroxyapatite (HAP) microsponges were prepared and characterized in terms of their morphology and elemental distribution using a scanning electron microscope equipped with an X-ray detector. The swelling ratio, porosity, degradability, antibacterial activity, and bioactivity were detected and analyzed. The biological functions of the CS-HAP microsponges were examined to assess the adhesion, proliferation, and differentiation of in vitro co-cultured rat bone marrow mesenchymal stem cells (rBMSCs). Furthermore, the CS-HAP microsponges were used as cell-free scaffolds and implanted into calvarial defects in a rat model to evaluate the in vivo osteogenesis.

Results

The CS-HAP microsponges have a porous structure with high porosity (~76%), good swelling capacity (~1900%), and shape-memory properties. The results of in vitro experiments show that the CS-HAP microsponges achieve good bioactivity and promote osteogenic differentiation of rBMSCs. Furthermore, the CS-HAP microsponges significantly promote bone regeneration in rat calvarial defects.

Conclusion

The bioactive CS-HAP microsponges have the potential to be used as bone substitute materials for bone tissue engineering.

Engineering the Nonmorphing Point of Actuation for Controlled Drug Release by Hydrogel Bilayer across the pH Spectrum

Hydrogel-based pH-responsive bilayer actuators exhibit bidirectional actuation due to the differences in the concentration gradient developed across the thickness, the volume expansion due to swelling, and the mechanical stiffness of the layers involved. At a pH value (point), where the sum of these factors generates moments of equal magnitudes, the moments cancel each other and result in no net actuation. This pH point is termed here as a "nonmorphing point". In this work, we present a bilayer of chitosan (CS) and carboxymethyl cellulose (CMC) cross-linked with citric acid (CA) with tunable nonmorphing points across the pH spectrum by modulating the concentration and cross-linking density of the layers involved. The standard CS/CMC bilayer films took about 40 s to completely fold (clockwise) in 0.1 M HCl and 78 s to completely fold (anticlockwise) in 0.1 M NaOH. Generally, pH-responsive actuators are designed for targeted drug delivery to a specific site inside the body as they show bidirectional (clockwise/anticlockwise) actuation around a single nonmorphing point. The same pH-responsive system cannot be applied for drug release at another site with a different functioning pH. Thus, having a pH-responsive system with multiple nonmorphing points is highly desirable. Drug release experiments were performed with FITC and EtBr as model drugs loaded in CS and CMC layers. Moreover, the clockwise/anticlockwise actuation of the bilayer around the nonmorphing point can facilitate or inhibit the release of a drug. The clockwise actuation resulted in 55% FITC release and inhibited EtBr release to 4%; anticlockwise actuation resulted in 50% EtBr release and inhibited FITC release to 5%. We demonstrated morphing induced drug release by hydrogel bilayer films with tunable nonmorphing points across the pH spectrum.

Electrochemical Immunosensor for Early Detection of β-Amyloid Alzheimer's Disease Biomarker Based on Aligned Carbon Nanotubes Gold Nanocomposites

Beta-amyloid (βA) peptides accompanying the physiological change in brain induce Alzheimer's disease. In this work, a highly sensitive electrochemical (EC) immunosensor platform has been developed for the quantitative detection of βA peptides, using the gold nanoparticle functionalized chitosan-aligned carbon nanotube (CS-aCNT-Au) nanocomposites on glassy carbon electrodes (GCE). The immunosensor has been fabricated by immobilization of the anti-βA antibody upon CS-aCNT-Au/GCE. In the CS-aCNT nanocomposite, CS has high biocompatibility. Hydroxy and amine functionalities favor the antibody immobilization and prevent the leaching of nanocomposites of the modified electrode due to the adhesive environment. Moreover, aCNT offers high conductivity, stability, and a large surface area (the calculated effective surface area of the CS-aCNT/GCE is 8.594 × 10^-2 cm²). However, the incorporation of AuNPs further enhances the conductivity of the CS-aCNT-Au nanocomposite based on differential pulse voltammetry (DPV) results, and also improves the effective surface area (9.735 × 10^-2 cm²). The surface morphology and electrochemical studies of the nanocomposite, as well as its modifications by the anti-βA antibody and BSA, were carried out through field emission scanning electron microscope (FESEM), cyclic voltammetry (CV), and DPV. The quantitative immunosensing of the βA in phosphate-buffered saline (PBS) solution is accomplished via DPV, which reveals that the immunosensor has a high sensitivity of 157.60 µA pg^-1 mL cm^-2 and a broad detection range of 10.0 pg mL^-1-100.0 µg mL^-1, with a limit of detection (LOD) of 0.87 pg mL^-1. Subsequently, we detected the spiked βA in diluted serum with a linear detection range of 10.0 pg mL^-1-1.0 ng mL^-1 and LOD of 0.95 pg mL^-1. Moreover, a selectivity study exhibited a high affinity of immunosensors towards βA. Thus, we propose that this highly efficient immunosensor can potentially be applied for the point-of-care (POC) sensing of βA in clinical samples.

Physicochemical and Biological Evaluation of Chitosan-Coated Magnesium-Doped Hydroxyapatite Composite Layers Obtained by Vacuum Deposition

In the present work, the effectiveness of vacuum deposition technique for obtaining composite thin films based on chitosan-coated magnesium-doped hydroxyapatite Ca10−xMgx(PO4)6 (OH)2 with xMg = 0.025 (MgHApCh) was proved for the first time. The prepared samples were exposed to three doses (0, 3, and 6 Gy) of gamma irradiation. The MgHApCh composite thin films nonirradiated and irradiated were evaluated by scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS) studies. The biological evaluation of the samples was also presented. All the results obtained from this study showed that the vacuum deposition method allowed for obtaining uniform and homogeneous layers. Fine cracks were observed on the MgHApCh composite thin films’ surface after exposure to a 6 Gy irradiation dose. Additionally, after gamma irradiation, a decrease in Ca, P, and Mg content was noticed. The MgHApCh composite thin films with doses of 0 and 3 Gy of gamma irradiation showed a cellular viability similar to that of the control. Samples with 6 Gy doses of gamma irradiation did not cause significantly higher fibroblast cell death than the control (p > 0.05). On the other hand, the homogeneous distribution of pores that appeared on the surface of coatings after 6 Gy doses of gamma irradiation did not prevent the adhesion of fibroblast cells and their spread on the coatings. In conclusion, we could say that the thin films could be suitable both for use in bone implants and for other orthopedic and dentistry applications.

Thermoresponsive and Conductive Chitosan-Polyurethane Biocompatible Thin Films with Potential Coating Application

Conductive thin films have great potential for application in the biomedical field. Herein, we designed thermoresponsive and conductive thin films with hydrophilicity, strain sensing, and biocompatibility. The crosslinked dense thin films were synthesized and prepared through a Schiff base reaction and ionic interaction from dialdehyde polyurethane, N-carboxyethyl chitosan, and double-bonded chitosan grafted polypyrrole. The thin films were air-dried under room temperature. These thin films showed hydrophilicity and conductivity (above 2.50 mS/cm) as well as responsiveness to the deformation. The tensile break strength (9.72 MPa to 15.07 MPa) and tensile elongation (5.76% to 12.77%) of conductive thin films were enhanced by heating them from 25 °C to 50 °C. In addition, neural stem cells cultured on the conductive thin films showed cell clustering, proliferation, and differentiation. The application of the materials as a conductive surface coating was verified by different coating strategies. The conductive thin films are potential candidates for surface modification and biocompatible polymer coating.

Recent advances in functionalized nanomaterials for the diagnosis and treatment of bacterial infections

The growing problem of resistant infections due to antibiotic misuse is a worldwide concern that poses a grave threat to healthcare systems. Thus, it is necessary to discover new strategies to combat infectious diseases. In this review, we provide a selective overview of recent advances in the use of nanocomposites as alternatives to antibiotics in antimicrobial treatments. Metals and metal oxide nanoparticles (NPs) have been associated with inorganic and organic supports to improve their antibacterial activity and stability as well as other properties. For successful antibiotic treatment, it is critical to achieve a high drug concentration at the infection site. In recent years, the development of stimuli-responsive systems has allowed the vectorization of antibiotics to the site of infection. These nanomaterials can be triggered by various mechanisms (such as changes in pH, light, magnetic fields, and the presence of bacterial enzymes); additionally, they can improve antibacterial efficacy and reduce side effects and microbial resistance. To this end, various types of modified polymers, lipids, and inorganic components (such as metals, silica, and graphene) have been developed. Applications of these nanocomposites in diverse fields ranging from food packaging, environment, and biomedical antimicrobial treatments to diagnosis and theranosis are discussed.

Application of a New Type of Natural Calcined Bone Repair Material Combined with Concentrated Growth Factors in Bone Regeneration in Rabbit Critical-Sized Calvarial Defect

Purpose

This study is aimed at investigating bone regeneration in critical-sized defects in rabbit calvarium using a novel nano- (n-) hydroxyapatite hybrid scaffold with concentrated growth factors (CGFs).

Methods

Twenty-four male adult rabbits were chosen to establish a critical-sized bone defect model and randomly divided into two groups. Two defects of 15 mm diameter each were created in the parietal bone of each animal. Group A had n-hydroxyapatite hybrid scaffold placed in the experimental defect on the right, and the left defect was unfilled as blank. Group B had hydroxyapatite hybrid scaffold mixed with CGF placed in the right defect and CGF on the left. Six animals in each group were sacrificed after 6 and 12 weeks. Cone-beam computed tomography system scanning and hematoxylin and eosin (HE) staining were used to detect osteogenesis within the defects.

Results

The treatment with n-hydroxyapatite hybrid scaffold along with CGF resulted in a significantly higher amount of new bone at 6 and 12 weeks compared to the treatment with CGF alone and the controls. No apparent inflammation and foreign body reaction were observed through HE staining.

Conclusions

The new synthesized n-hydroxyapatite hybrid scaffold and CGF can be applied for bone defect regeneration to promote the process to a certain extent.

The effects on antioxidant enzymes of PMMA/hydroxyapatite nanocomposites/composites

In this study, polymer-ceramic nanocomposites and/or composites were prepared by solution removal method using poly(methylmethacrylat) (PMMA) and nano-hydroxyapatite (nHA). They were characterized using X-ray diffraction (XRD), Fourier transform infrared-attenuated total reflection spectroscopy (FTIR-ATR), and differential thermal analysis/thermogravimetry (DTA/TG). Their effects and biocompatibilities on antioxidant enzymes were also investigated in detail. It has been shown that nHA was dramatically dispersed at nanoscale in the polymer matrix. The interaction occurred between OH groups of nHA and carbonyl groups of polymer and introduction of ceramic into the polymer matrix generally resulted in an increase in thermal stability. Nanocomposites and composites had different effects on enzyme activities. Samples synthesized in acetone increased enzyme activities for glutathione reductase (GR) and glucose-6 phosphate dehydrogenase (G6PD) enzymes, while inhibiting glutathione peroxidase (GPx) and catalase (CAT) enzyme activities. On the other hand, samples synthesized in tetrahydrofuran (THF) exhibited inhibitory behavior for G6PD and CAT enzymes. The samples synthesized in different media did not show any regularity on enzyme activities. The nanocomposites and/or composites prepared in acetone media were better hemocompatible than those in THF.

Biocompatibility and mechanical properties evaluation of chitosan films containing an N-acylhydrazonic derivative

The N-acylhydrazone subunit is considered a privileged structure in medicinal chemistry for its importance in pharmaceutical research. Also, alternative methods to deliver these molecules have a great pharmaceutical interest. Therefore, the objective of this work was to encapsulate JR19, an N-acyl hydrazone subunit, into chitosan films and evaluate several properties relevant for transdermal delivery, including biocompatibility using in vitro tests. CHI + JR19 film demonstrates greater strength, flexibility, water absorption capacity, low contact angle and higher surface roughness when compared to CHI. Agar diffusion and 3-(4,5-dimethyl)-2,5-diphenyl tetrazolium bromide (MTT) assay show the absence of cytotoxicity and the higher cell viability for CHI + JR19 films. Therefore, the addition of JR19 in the system positively influenced mechanical properties and granted better compatibility with biological environments, showing the potential to treat skin inflammation.

Nanostructured selenium-doped biphasic calcium phosphate with in situ incorporation of silver for antibacterial applications

Selenium-doped nanostructure has been considered as an attractive approach to enhance the antibacterial activity of calcium phosphate (CaP) materials in diverse medical applications. In this study, the selenium-doped biphasic calcium phosphate nanoparticles (SeB-NPs) were first synthesized. Then, silver was in situ incorporated into SeB-NPs to obtain nanostructured composite nanoparticles (AgSeB-NPs). Both SeB-NPs and AgSeB-NPs were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-Vis), X-ray photoelectron spectroscopy (XPS), and Raman spectra. The results confirmed that the SeO32- was doped at the PO43- position and silver nanoparticles were deposited on the surface of SeB-NPs. Next, Transmission Electron Microscopy (TEM) analysis displayed that the prepared AgSeB-NPs had a needle-cluster-like morphology. CCK-8 analysis revealed SeB-NPs and AgSeB-NPs had good cytocompatibility with osteoblasts. The antibacterial activity of the prepared AgSeB-NPs was confirmed by using Gram-negative E. coli and Gram-positive S. aureus. The above results manifested the significance of the final AgSeB-NPs for biomedical applications.

Essential oil impregnated luminescent hydroxyapatite: Antibacterial and cytotoxicity studies

In this study, porous fluorescent nanocrystalline erbium doped hydroxyapatite (eHAp) was synthesized via hydrothermal assisted co-precipitation method. Eucalyptus oil (EU), frankincense oil (FO), Tea tree oil (TTO), wintergreen oil (WO) were successfully absorbed into eHAp pellet by vacuum filtration technique using Buckner funnel. Phase crystallization, fluorescence property and microstructure of eHAp were confirmed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Photoluminiscence spectroscopy (PL) and Field emission scanning electron microscopy (FESEM). Strong antimicrobial activity was observed for EU, TTO and WO on both E. coli and S. aureus mediated by cell membrane damage and leakage of cytoplasmic components. The oil absorbed eHAp nanocomposites were found to be moderately biocompatible with normal WI-38 cells up to MIC concentration various time scale. The nanocomposites showed significant cytotoxic activity on breast cancer cell line MDA-MB 468 and the fluorescent property of the eHAp was utilized to visualize internalization of particles in the cells. The release profile of the oils from the eHAp matrix showed pH dependent release indicated that the porous matrix can be used as a suitable carrier for modulated and sustained release of bioactive components. Thus, given the multifunctional attributes these natural essential oil-based nanocomposites show great promise as an alternative to conventional therapeutic treatments.

The Effect of Nanofillers on the Functional Properties of Biopolymer-based Films: A Review

Waste from non-degradable plastics is becoming an increasingly serious problem. Therefore, more and more research focuses on the development of materials with biodegradable properties. Bio-polymers are excellent raw materials for the production of such materials. Bio-based biopolymer films reinforced with nanostructures have become an interesting area of research. Nanocomposite films are a group of materials that mainly consist of bio-based natural (e.g., chitosan, starch) and synthetic (e.g., poly(lactic acid)) polymers and nanofillers (clay, organic, inorganic, or carbon nanostructures), with different properties. The interaction between environmentally friendly biopolymers and nanofillers leads to the improved functionality of nanocomposite materials. Depending on the properties of nanofillers, new or improved properties of nanocomposites can be obtained such as: barrier properties, improved mechanical strength, antimicrobial, and antioxidant properties or thermal stability. This review compiles information about biopolymers used as the matrix for the films with nanofillers as the active agents. Particular emphasis has been placed on the influence of nanofillers on functional properties of biopolymer films and their possible use within the food industry and food packaging systems. The possible applications of those nanocomposite films within other industries (medicine, drug and chemical industry, tissue engineering) is also briefly summarized.