Comparative studies on amphotericin B nanosuspensions prepared by a high pressure homogenization method and an antisolvent precipitation method

A 3D in-vitro biomimicking Caco-2 intestinal permeability model-based assessment of physically modified telmisartan towards an alkalizer-free formulation development

Efficient telmisartan delivery for hypertension management requires the incorporation of meglumine and/or sodium hydroxide as an alkalizer in the formulation. Long-term use of powerful alkalis with formulation as part of chronic therapy can cause metabolic alkalosis, ulcers, diarrhea, and body pain. Here, we aimed to design a telmisartan formulation without alkalizers. Telmisartan properties were tailor-made by microfluidizer-based physical modification. After microfluidization, telmisartan nanosuspension was lyophilized to obtain telmisartan premix powder. The optimized telmisartan nanosuspension had an average particle size of 579.85 ± 32.14 nm. The lyophilized premix was characterized by FT-IR, DSC, and PXRD analysis to ensure its physicochemical characteristics. The solubility analysis of premix showed 2.2 times, 2.3 times, and 6 times solubility improvement in 0.1 N HCl, phosphate buffer pH 7.5, and pH 6.8 compared to pure telmisartan. A 3D in-vitro Caco-2 model was developed to compare apparent permeability of API and powder premix. It showed that the powder premix was more permeable than pure API. The tablet formulation prepared from the telmisartan premix showed a dissolution profile comparable to that of the marketed formulation. The technique present herein can be used as a platform technology for solubility and permeability improvement of similar classes of molecules.

Sonication-Assisted Self-Assembled Resveratrol Nanoparticles with Enhanced Antiviral and Anti-inflammatory Activity against Respiratory Syncytial Virus-Induced Pneumonia

Respiratory syncytial virus (RSV)-induced viral pneumonia in children is common worldwide. Its high occurrence and lack of an effective vaccine make it a leading cause of death in children. Severe RSV infection can trigger uncontrolled inflammatory responses in patients, so the development of small molecule drugs with the dual function of "direct antivirus" and "inflammatory response regulation" is welcome. Resveratrol (Res) has been reported to have antiviral and anti-inflammatory pharmacological effects, but its application is limited because of its poor water solubility and oral bioavailability. Based on small-molecule nanotechnology, we developed a sonication-assisted self-assembly method for preparing insoluble Res into highly soluble resveratrol nanoparticles (Res NPs). The obtained Res NPs exhibited a higher water solubility and a faster dissolution rate, which was more conducive to the effectiveness of Res in addressing RSV-induced viral pneumonia. In vitro studies had shown that Res NPs played an antiviral role by inhibiting RSV replication and reducing the production of pro-inflammatory cytokines. Nebulized inhalation administration of Res NPs prolonged the drug's residence time in the lungs, which appears to increase the accumulation and effectiveness of Res NPs. Additionally, in vivo studies had demonstrated significant benefits of Res NPs in inhibiting RSV viral load and improving the pulmonary microenvironment in RSV-infected mice. Both antiviral and anti-inflammatory experiments had confirmed that the pharmacological activity of Res NPs is superior to that of Res. This suggested that nanosizing Res was an effective way to enhance the original pharmacological activity of Res and also offered a new formulation strategy for treating viral pneumonia.

Nanosuspensions in ophthalmology: Overcoming challenges and enhancing drug delivery for eye diseases

This review article provides a comprehensive overview of the advancements in using nanosuspensions for controlled drug delivery in ophthalmology. It highlights the significance of ophthalmic drug delivery due to the prevalence of eye diseases and delves into various aspects of this field. The article explores molecular mechanisms, drugs used, and physiological factors affecting drug absorption. It also addresses challenges in treating both anterior and posterior eye segments and investigates the role of mucus in obstructing micro- and nanosuspensions. Nanosuspensions are presented as a promising approach to enhance drug solubility and absorption, covering formulation, stability, properties, and functionalization. The review discusses the pros and cons of using nanosuspensions for ocular drug delivery and covers their structure, preparation, characterization, and applications. Several graphical representations illustrate their role in treating various eye conditions. Specific drug categories like anti-inflammatory drugs, antihistamines, glucocorticoids, and more are discussed in detail, with relevant studies. The article also addresses current challenges and future directions, emphasizing the need for improved nanosuspension stability and exploring potential technologies. Nanosuspensions have shown substantial potential in advancing ophthalmic drug delivery by enhancing solubility and absorption. This article is a valuable resource for researchers, clinicians, and pharmaceutical professionals in this field, offering insights into recent developments, challenges, and future prospects in nanosuspension use for ocular drug delivery.

Combined Hydroxyethyl Starch Luteolin Nanocrystals for Effective Anti-Hyperuricemia Effect in Mice Model

Introduction

Although flavonoid compounds exhibit various pharmacological activities, their clinical applications are restricted by low oral bioavailability owing to their poor solubility. Nanocrystals (NCs) represent an excellent strategy for enhancing the oral bioavailability of flavonoids. Hydroxyethyl starch (HES), a biomaterial compound used as a plasma expander, could be an ideal stabilizer material for preparing flavonoid NCs.

Methods

HES was used to stabilize flavonoid nanocrystals (NCs), using luteolin (LUT) as a model drug. After full characterization, the freeze-drying and storage stability, solubility, intestinal absorption, pharmacokinetics, and in vivo anti-hyperuricemic effect of the optimized HES-stabilized LUT NCs (LUT-HES NCs) were investigated.

Results

Uniformed LUT-HES NCs were prepared with mean particle size of 191.1±16.8 nm, zeta potential of about -23 mV, drug encapsulation efficiency of 98.52 ± 1.01%, and drug loading of 49.26 ± 0.50%. The freeze-dried LUT-HES NCs powder showed good re-dispersibility and storage stability for 9 months. Notably, compared with the coarse drug, LUT-HES NCs exhibited improved saturation solubility (7.49 times), increased drug dissolution rate, enhanced Caco-2 cellular uptake (2.78 times) and oral bioavailability (Fr=355.7%). Pharmacodynamic studies showed that LUT-HES NCs remarkably lowered serum uric acid levels by 69.93% and ameliorated renal damage in hyperuricemic mice.

Conclusion

HES is a potential stabilizer for poorly soluble flavonoid NCs and provides a promising strategy for the clinical application of these compounds. LUT-HES NCs may be an alternative or complementary strategy for hyperuricemia treatment.

Novel tetrahydrocurcumin integrated mucoadhesive nanocomposite κ-carrageenan/xanthan gum sponges: a strategy for effective local treatment of oral cancerous and precancerous lesions

Oral cancer is one of the leading causes of death worldwide. Oral precancerous lesions (OPL) are the precursors of oral cancer, with varying degrees of progression. Tetrahydrocurcumin (THC) is a major metabolite of curcumin with superior anticancer properties against various types of cancer. However, THC's clinical outcome is limited by its poor aqueous solubility. Herein, we developed novel mucoadhesive biopolymer-based composite sponges for buccal delivery of THC, exploiting nanotechnology and mucoadhesion for efficient prevention and treatment of oral cancer. Firstly, THC-nanocrystals (THC-NC) were formulated and characterized for subsequent loading into mucoadhesive composite sponges. The anticancer activity of THC-NC was assessed on a human tongue squamous carcinoma cell line (SCC-4). Finally, the chemopreventive activity of THC-NC loaded sponges (THC-NC-S) was examined in DMBA-induced hamster OPL. The selected THC-NC exhibited a particle size of 532.68 ± 13.20 nm and a zeta potential of -46.08 ± 1.12 mV. Moreover, THC-NC enhanced the anticancer effect against SCC-4 with an IC50 value of 80 µg/mL. THC-NC-S exhibited good mucoadhesion properties (0.24 ± 0.02 N) with sustained drug release, where 90% of THC was released over 4 days. Furthermore, THC-NC-S had a magnificent potential for maintaining high chemopreventive activity, as demonstrated by significant regression in the dysplasia degree and a decline in cyclin D1 (control: 40.4 ± 12.5, THC-NC-S: 12.07 ± 5.2), culminating in significant amelioration after 25 days of treatment. Conclusively, novel THC-NC-S represent a promising platform for local therapy of OPL, preventing their malignant transformation into cancer.

Nanosuspensions as carriers of active ingredients: Chemical composition, development methods, and their biological activities

Nanosuspensions (NSps) are colloidal dispersions of particles that have the potential to solve the delivery problems of active ingredients associated with their low solubility in water or instability due to environmental factors. It is essential to consider their chemical composition and preparation methods because they directly influence drug loading, size, morphology, solubility, and stability; these characteristics of nanosuspensions influence the delivery and bioavailability of active ingredients. NSps provides high loading of drugs, protection against degrading agents, rapid dissolution, high particle stability, and high bioavailability of active ingredients across biological membranes. In addition, they provide lower toxicity compared to other nanocarriers, such as liposomes or polymeric nanoparticles, and can modify the pharmacokinetic profiles, thus improving their safety and efficacy. The present review aims to address all aspects related to the composition of NSps, the different methods for their production, and the main factors affecting their stability. Moreover, recent studies are described as carriers of active ingredients and their biological activities.

Nanosuspensions technology as a master key for nature products drug delivery and In vivo fate

The drug nanosuspensions is a universal formulation approach for improved drug delivery of hydrophobic drugs and one the most promising approaches for increasing the biopharmaceutical performance of poorly water-soluble drug substances, especially for nature products. This review aimed to summarize the nanosuspensions preparation approaches and the main technological difficulties encountered in nanosuspensions development, such as guidelines for stabilizers screening, in vivo fate of the intravenously administrated nanosuspensions, and how to realize the intravenously target delivery was reviewed. Furthermore, challenges of nanosuspensions for the nature products delivery also was discussed and commented. Therefore, it hoped to provide reference and assistance for the nanosuspensions production, stabilizers usage, and predictability of in vivo fate and controllability of targeting delivery of the nature products nanosuspensions.

Development of a Self-Assembled Hydrogels Based on Carboxymethyl Chitosan and Oxidized Hyaluronic Acid Containing Tanshinone Extract Nanocrystals for Enhanced Dissolution and Acne Treatment

This study aimed to construct a pH-responsive nanocrystalline hydrogel drug delivery system for topical delivery of insoluble drugs based on the self-assembly behavior of carboxymethyl chitosan (CMC) and oxidized hyaluronic acid (OHA). The tanshinone nanocrystal (TNCs) extract was prepared by dielectric milling method, the type and ratio of stabilizer of the drug were investigated to optimize the prescription, and the effector surface method was used to optimize the preparation process. OHA was prepared by the sodium periodate oxidation method, and the concentration of CMC and OHA was optimized using gel formation time as an indicator. OHA was dissolved in TNCs and self-assembled with CMC solution to form tanshinone extract nanocrystal hydrogels (CMC-OHA/TNCs), of which the physicochemical properties and in vitro antibacterial activity were evaluated. Results showed that the optimized prescription and process could produce tanshinone extract nanocrystals with a particle size of (223.67 ± 4.03) nm and a polydispersity index (PDI) of 0.2173 ± 0.0008. According to SEM and XRD results, TNCs were completely wrapped in the hydrogel as nanoparticles, and the crystallinity of TNCs was reduced and the diffraction peaks in CMC-OHA/TNCs almost disappeared. In vitro, transdermal test results showed that CMC-OHA/TNCs could release the drug continuously at the acne lesions. The cell-counting kit-8 (CCK-8) assay confirmed that the CMC-OHA/TNCs had no obvious cytotoxicity. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of CMC-OHA/TNCs against Propionibacterium acnes and Staphylococcus aureus were significantly lower and the diameter of the inhibition circle was obviously higher than that of TNCs and tanshinone extract crude suspension. This study demonstrated that CMC-OHA/TNCs was a promising delivery system for topical delivery of insoluble drugs, which could improve the solubility of tanshinone extract and enhance its in vitro bacterial inhibitory activity.

Development of Abiraterone Acetate Nanocrystal Tablets to Enhance Oral Bioavailability: Formulation Optimization, Characterization, In Vitro Dissolution and Pharmacokinetic Evaluation

Abiraterone acetate is a prodrug of abiraterone used in combination with prednisone as a standard therapeutic strategy for hormone-resistant prostate cancer (mCRPC). Due to the poor solubility and permeability, the release and absorption of abiraterone acetate are low and reduce its bioavailability. In this project, abiraterone acetate tablets prepared using nanocrystal technology were developed to overcome the drawbacks of normal tablets by enhancing in vitro dissolution rate and oral bioavailability. The abiraterone acetate nanocrystal suspensions were prepared by top-down wet milling method using a planetary ball mill with the mixture of Poloxamer 407 and Poloxamer 188 as the optimized stabilizer at a ratio of 7:1. The optimized nanocrystals were freeze-dried and characterized using DLS, TEM, DSC, and XRD. The abiraterone acetate nanocrystal tablets significantly improve the in vitro dissolution rate of abiraterone acetate compared to raw materials. Although exhibiting a similar dissolution rate compared to the Zytiga^® tablets, the nanocrystal tablets significantly improve the oral bioavailability with C_max and AUC_0–t being 3.51-fold and 2.80-fold higher, respectively, in the pharmacokinetic study. The present data indicate that nanocrystal is a promising strategy for improving the dissolution and bioavailability of abiraterone acetate.

Preparation, Characterization, and Evaluation of Breviscapine Nanosuspension and Its Freeze-Dried Powder

As a biopharmaceutics classification system (BCS) class IV drug, breviscapine (Bre) has low solubility in water, poor chemical stability, a short biological half-life and rapid removal from plasma. This paper prepared a Bre nanosuspension (Bre-NS) by an ultrasound-assisted anti-solvent precipitation method. Characterization of Bre-NS was studied using a Box–Behnken design concerning drug concentration in DMSO, an anti-solvent-to-solvent ratio, and sonication time. Under the optimized conditions of 170 mg/mL for the drug concentration, a 1:60 solvent-to-anti-solvent ratio, and a 9 min sonication time, the particle size of Bre-NS was 303.7 ± 7.3 nm, the polydispersity index was 0.178 ± 0.015, and the zeta potential was −31.10 ± 0.26 mV. Combined with the results from differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and Fourier transform-infrared spectroscopy (FT-IR), the findings indicated that the crystal form and chemical structure of Bre-NS did not change during the entire process. The optimized formulation displayed good stability, increased solubility, and better in vitro release. Therefore, the results of this study can be a reference for the delivery system design of insoluble active components and effective parts in traditional Chinese medicine.

Nanocrystals based mucosal delivery system: Research Advances

Nanocrystal technology is a new way to increase the solubility and bioavailability of poorly soluble drugs. As an intermediate preparation technology, nanocrystals are widely used in drug delivery for oral, venous, percutneous and inhalation administration, which exhibits a broad application prospect. By referring to the domestic anforeign literatures, this paper mainly reviews the preparation methods of nanocrystals for poorly soluble natural products and its application in the mucosal delivery for skin, eye, oral cavity and nasal cavity. This can provide the reference for the research and development of nanocrystal technology in natural product preparations.

Improved water dispersion and bioavailability of coenzyme Q10 by bacterial cellulose nanofibers

The purpose of this study was to investigate the potential of bacterial cellulose nanofiber suspension (BCNs) as stabilizer in anti-solvent precipitation and its effect on improving bioavailability of coenzyme Q10. Bacterial cellulose (BC) was hydrolyzed by sulfuric acid followed by the oxidation with hydrogen peroxide to prepare BCNs. The suspension of BCNs-loaded CoQ10 (CoQ10-BCNs) were prepared by antisolvent precipitation. The zeta potential of CoQ10-BCNs was about -36.01 mV. The properties of CoQ10, BCNs and CoQ10-BCNs were studied by scanning electron microscopy, transmission electron microscope, Fourier-transform infrared spectroscopy, X-ray diffraction, differential scanning calorimetry and thermo gravimetric analysis. The crystallinity of CoQ10 decreased in CoQ10-BCNs compared with the raw CoQ10, and CoQ10-BCNs have good physicochemical stability. In oral bioavailability studies, the area under curve (AUC) of CoQ10-BCNs was about 3.62 times higher than the raw CoQ10 in rats.

Amphotericin B nanohydrogel ocular formulation using alkyl glyceryl hyaluronic acid: Formulation, characterization, and in vitro evaluation

The present study focused on the development of an amphotericin B (AmB) nanoformulation for ophthalmic applications. Accordingly, AmB nanohydrogels (AHA/AmB) using alkyl glyceryl hyaluronic acid (Hyalorepair®, AHA), a hydrophobized hyaluronic acid, were prepared by employing the dialysis method, followed by assessments of physical properties, drug efficacy, and toxicity. In the AHA/AmB formulation, AmB existed in a self-aggregated and amorphous state in the hydrophobic environment of the AHA moiety. AHA/AmB was shown in vitro to interact with mucin, which is known to be expressed in the corneal epithelium and was expected to improve its corneal retention. Compared with the conventional AmB formulation, amphotericin B sodium deoxycholate, AHA/AmB had the same in vitro antifungal activity but significantly lower in vitro toxicity. These findings indicate that nanohydrogels prepared with AHA possess high fungal selectivity and serve as a promising system for ophthalmic AmB delivery.

Delivery strategies of amphotericin B for invasive fungal infections

Invasive fungal infections (IFIs) represent a growing public concern for clinicians to manage in many medical settings, with substantial associated morbidities and mortalities. Among many current therapeutic options for the treatment of IFIs, amphotericin B (AmB) is the most frequently used drug. AmB is considered as a first-line drug in the clinic that has strong antifungal activity and less resistance. In this review, we summarized the most promising research efforts on nanocarriers for AmB delivery and highlighted their efficacy and safety for treating IFIs. We have also discussed the mechanism of actions of AmB, rationale for treating IFIs, and recent advances in formulating AmB for clinical use. Finally, this review discusses some practical considerations and provides recommendations for future studies in applying AmB for combating IFIs.

Nanotechnology based solutions for anti-leishmanial impediments: a detailed insight

As a neglected tropical disease, Leishmaniasis is significantly instigating morbidity and mortality across the globe. Its clinical spectrum varies from ulcerative cutaneous lesions to systemic immersion causing hyperthermic hepato-splenomegaly. Curbing leishmanial parasite is toughly attributable to the myriad obstacles in existing chemotherapy and immunization. Since the 1990s, extensive research has been conducted for ameliorating disease prognosis, by resolving certain obstacles of conventional therapeutics viz. poor efficacy, systemic toxicity, inadequate drug accumulation inside the macrophage, scarce antigenic presentation to body's immune cells, protracted length and cost of the treatment. Mentioned hurdles can be restricted by designing nano-drug delivery system (nano-DDS) of extant anti-leishmanials, phyto-nano-DDS, surface modified-mannosylated and thiolated nano-DDS. Likewise, antigen delivery with co-transportation of suitable adjuvants would be achievable through nano-vaccines. In the past decade, researchers have engineered nano-DDS to improve the safety profile of existing drugs by restricting their release parameters. Polymerically-derived nano-DDS were found as a suitable option for oral delivery as well as SLNs due to pharmacokinetic re-modeling of drugs. Mannosylated nano-DDS have upgraded macrophage internalizing of nanosystem and the entrapped drug, provided with minimal toxicity. Cutaneous Leishmaniasis (CL) was tackling by the utilization of nano-DDS designed for topical delivery including niosomes, liposomes, and transfersomes. Transfersomes, however, appears to be superior for this purpose. The nanotechnology-based solution to prevent parasitic resistance is the use of Thiolated drug-loaded and multiple drugs loaded nano-DDS. These surfaces amended nano-DDS possess augmented IC50 values in comparison to conventional drugs and un-modified nano-DDS. Phyto-nano-DDS, another obscure horizon, have also been evaluated for their anti-leishmanial response, however, more intense assessment is a prerequisite. Impoverished Cytotoxic T-cells response followed by Leishmanial antigen proteins delivery have also been vanquished using nano-adjuvants. The eminence of nano-DDS for curtailment of anti-leishmanial chemotherapy and immunization associated challenges are extensively summed up in this review. This expedited approach is ameliorating the Leishmaniasis management successfully. Alongside, total to partial eradication of this disease can be sought along with associated co-morbidities.

Can the cavi-precipitation process be exploited to generate smaller size drug nanocrystal?

OBJECTIVE

Cavi-precipitation has the potential to generate drug nanocrystals very efficiently. Achieving smaller than 100 nm particle size for organic drug substances still remained a challenge. The objective of this study was to demonstrate if cavi-precipitation technology can be used to generate smaller than 100 nm drug nanocrystal particle.

SIGNIFICANCE

This study demonstrates that cavi-precipitation process can be used to generate drug nanocrystals of the model compound resveratrol (RVT) consists of crystallites of 30-50 nm size.

METHOD

RVT was dissolved in different organic solvents to prepare the solvent phase (S-phase). Several stabilizers were tested for the organic phase. A combination of SDS and PVP was used stabilizer system in the aqueous anti-solvent phase (AS-phase). The S-phase was added to the AS-phase inside the Emulsiflex C5 homogenizer. Nanosuspension was characterized by laser diffractometry (LD), photon correlation spectroscopy (PCS) and scanning electron microscopy (SEM). The solid state of the suspended particles was investigated by powder X-ray diffractometry (PXRD) and differential scanning calorimetry (DSC).

RESULTS

It was found that DMSO, alone or in combination with acetone in the S-Phase generated the smallest size RVT nanocrystals. The optimum solvent (S) antisolvent (AS) ratio (S:AS) was found to be 3.6:56.4 (v:v). Span 20 was identified as the best stabilizer for the organic phase at a ratio (w:w) of 1:3 (Span 20:RVT). The particles precipitated from different solvents were predominantly crystalline.

CONCLUSIONS

The best sample had a mean particle size (LD) of 167 nm [d(0.5)] which was composed of smaller crystallites having 30-50 nm size (SEM).

Preparation and antitumor evaluation of quercetin nanosuspensions with synergistic efficacy and regulating immunity

To study the effect of quercetin (QUR) on modulating immune effects, enhancing anti-tumor activity, and reducing drug related side effects, three QUR nanosuspensions (QUR-NPs) with different particle sizes were prepared by a microprecipitation-high pressure homogenization method using mPEG-DCA as a stabilizer. Dynamic light scattering was used to analyze the particle sizes of the three QUR-NPs. The results of stability tests showed that the three QUR-NPs had good storage and plasma stability. It was confirmed that plasma protein adsorption occurred for all three QUR-NPs. The results of DSC, DTG, XRPD, and Raman spectroscopy showed that there was no significant change in the crystal form of QUR for any of the three QUR-NPs compared with the commercial QUR. The in vitro dissolution rate of the three QUR-NPs was significantly faster than that of the micronized QUR, with the dissolution rate increasing as particle size decreased. All three QUR-NPs showed stronger in vitro inhibitory activity on MCF-7 cells than the pure QUR solution, with the largest NPs having the strongest inhibitory effect. The pharmacokinetic parameters in rats showed that the MRT and t_1/2 of the QUR-NPs increased as particle size increased. QUR-NPs and the pure QUR solution showed obvious anti-tumor effects against murine hepatic carcinoma H22 model in vivo, although they were not as effective as cyclophosphamide (CTX). However, the anti-tumor effect of the large QUR-NPs combined with CTX was the strongest among all the tested groups. From the results of the thymus and spleen index, it was found that the QUR-NPs could not only regulate the immunity of tumor-bearing mice, but also alleviate the immunosuppression caused by CTX and protect normal tissues, all while enhancing the anti-tumor effect. The immunomodulatory effect of the QUR-NPs on tumor-bearing mice was significantly better than that of the pure QUR solution. Therefore, nanosuspensions can be used as a new drug delivery system for QUR to assist tumor therapy and regulate immunity.

Development of an amphotericin B micellar formulation using cholesterol-conjugated styrene-maleic acid copolymer for enhancement of blood circulation and antifungal selectivity

Amphotericin B (AmB) is an effective antifungal agent for life-threatening systemic fungal infections. However, its poor solubility in water and organic solvents makes it difficult to formulate. We previously reported AmB-encapsulated micellar formations using styrene-maleic acid copolymer (SMA) and butylated SMA. These micelles make AmB water-soluble; however, the blood circulation of AmB by these intravenous administrations was as low as that of Fungizone®, a conventional micellar formulation of AmB. The destabilization of SMA micelles by salt in the blood has been suggested to be a cause of low blood circulation. Therefore, in this study, to reduce salt-induced instability and increase blood circulation of the micelles, we covalently attached cholesterol molecules to the SMA backbone because AmB interacts with sterols. This AmB nanoparticle micellar formulation (Cho-SMA/AmB micelles) was water-soluble, stable in the presence of salts, and formed a complex with albumin. Compared with Fungizone®, this formulation had equal antifungal activity and markedly improved blood circulation and lower toxicity. Its toxicity was further reduced in the presence of albumin. Taken together, our results indicate that Cho-SMA/AmB micelles could be an intravenous formulation with high antifungal selectivity, and drug interactants-conjugated SMA system could be applied to a variety of drug-loaded nanomicellar systems.

Enhanced transdermal delivery of curcumin nanosuspensions: A mechanistic study based on co-localization of particle and drug signals

Nanosuspensions have received much attention in enhanced transdermal delivery. However, the corresponding mechanisms have not been clarified. In particular, whether nanosuspensions can directly penetrate across the stratum corneum (SC) and what is the transdermal route for the enhanced penetration. Therefore, curcumin (CUR) was adopted in this study as a model drug, while an aggregation-caused quenching (ACQ) probe was physically embedded in CUR nanosuspensions, i.e., the CUR hybrid nanosuspensions (CUR-HNSs), for bioimaging. The ACQ properties enable identification of intact CUR-HNSs. The co-localization of particle and CUR signals was exploited to outline the translocation profiles of intact nanosuspensions as well as the cargoes. Three sizes of CUR-HNSs are prepared, which are spherical and amorphous. CUR is poor in transdermal transport even in propylene glycol solution, which was enhanced by nanosuspensions. Although 400 nm CUR-HNSs present higher steady state flux than 140 nm and 730 nm ones, the cumulative amount of permeated CUR is yet less than 2% of the applied dose at 12 h. Co-localization of CUR and ACQ probe signals indicates that CUR-HNSs can infiltrate into the SC layer and accumulate in the hair follicles. The intact CUR-HNSs cannot enter into the skin. On the contrary, CUR molecules diffuse into the whole skin tissues following dissolution of CUR-HNSs in the SC and the hair follicles. In conclusion, nanosuspensions are advantageous for transdermal delivery of poorly permeable drugs by filtrate into the SC and accumulate in hair follicles.

Tea saponins as natural stabilizers for the production of hesperidin nanosuspensions

Tea saponins (TS), a novel multifunctional stabilizer, were explored to stabilize the nanosuspensions. The purpose of this study was to investigate the effect of TS on the stability and redispersibility of nanosuspensions. In present work, hesperidin (HDN), a poorly soluble drug, was used as a model drug. HDN nanosuspensions (HDN-NS) with particle size of 250-270 nm were prepared by high-speed shearing and high-pressure homogenization. The zeta potential of HDN-NS was -23.16 ± 1.12 mV. Compared with traditional stabilizers, TS were superior in stabilization efficiency at low concentrations. Nanosuspensions freeze-dried powder using TS and lactose as cryoprotectants had good redispersibility, and the average particle size was 266.5 ± 9.0 nm after reconstitution. TS and lactose can effectively prevent the irreversible agglomeration of HDN-NS during freeze-drying. The dissolution was enhanced owing to particle size reduction. Transmission electron microscopy (TEM) and Scanning electron microscopy (SEM) results showed that HDN nanocrystals were irregularly lumpy. The chemical structure and crystal state of HDN had not significantly changed during production. In conclusion, TS have the potential to stabilize and disperse nanosuspensions and provide a promising strategy for the development of poorly soluble drugs.

Advanced modification of drug nanocrystals by using novel fabrication and downstream approaches for tailor-made drug delivery

Drug nanosuspensions/nanocrystals have been recognized as one useful and successful approach for drug delivery. Drug nanocrystals could be further decorated to possess extended functions (such as controlled release) and designed for special in vivo applications (such as drug tracking), which make best use of the advantages of drug nanocrystals. A lot of novel and advanced size reduction methods have been invented recently for special drug deliveries. In addition, some novel downstream processes have been combined with nanosuspensions, which have highly broadened its application areas (such as targeting) besides traditional routes. A large number of recent research publication regarding as nanocrystals focuses on above mentioned aspects, which have widely attracted attention. This review will focus on the recent development of nanocrystals and give an overview of regarding modification of nanocrystal by some new approaches for tailor-made drug delivery.

Insight into the Formation of Glimepiride Nanocrystals by Wet Media Milling

Nanocrystal formation for the dissolution enhancement of glimepiride was attempted by wet media milling. Different stabilizers were tested and the obtained nanosuspensions were solidified by spray drying in presence of mannitol, and characterized regarding their redispersibility by dynamic light scattering, physicochemical properties by differential scanning calorimetry (DSC), FT-IR spectroscopy, powder X-ray diffraction (PXRD), and scanning electron microcopy (SEM), as well as dissolution rate. Lattice energy frameworks combined with topology analysis were used in order to gain insight into the mechanisms of particle fracture. It was found that nanosuspensions with narrow size distribution can be obtained in presence of poloxamer 188, HPC-SL and Pharmacoat^® 603 stabilizers, with poloxamer giving poor redispersibility due to melting and sticking of nanocrystals during spray drying. DSC and FT-IR studies showed that glimepiride does not undergo polymorphic transformations during processing, and that the milling process induces changes in the hydrogen bonding patterns of glimepiride crystals. Lattice energy framework and topology analysis revealed the existence of a possible slip plane on the (101) surface, which was experimentally verified by PXRD analysis. Dissolution testing proved the superior performance of nanocrystals, and emphasized the important influence of the stabilizer on the dissolution rate of the nanocrystals.

Lipid Systems for the Delivery of Amphotericin B in Antifungal Therapy

Amphotericin B (AmB), a broad-spectrum polyene antibiotic in the clinic for more than fifty years, remains the gold standard in the treatment of life-threatening invasive fungal infections and visceral leishmaniasis. Due to its poor water solubility and membrane permeability, AmB is conventionally formulated with deoxycholate as a micellar suspension for intravenous administration, but severe infusion-related side effects and nephrotoxicity hamper its therapeutic potential. Lipid-based formulations, such as liposomal AmB, have been developed which significantly reduce the toxic side effects of the drug. However, their high cost and the need for parenteral administration limit their widespread use. Therefore, delivery systems that can retain or even enhance antimicrobial efficacy while simultaneously reducing AmB adverse events are an active area of research. Among those, lipid systems have been extensively investigated due to the high affinity of AmB for binding lipids. The development of a safe and cost-effective oral formulation able to improve drug accessibility would be a major breakthrough, and several lipid systems for the oral delivery of AmB are currently under development. This review summarizes recent advances in lipid-based systems for targeted delivery of AmB focusing on non-parenteral nanoparticulate formulations mainly investigated over the last five years and highlighting those that are currently in clinical trials.

Rilpivirine-associated aggregation-induced emission enables cell-based nanoparticle tracking

Antiretroviral therapy (ART) has improved the quality and duration of life for people living with human immunodeficiency virus (HIV) infection. However, limitations in drug efficacy, emergence of viral mutations and the paucity of cell-tissue targeting remain. We posit that to maximize ART potency and therapeutic outcomes newer drug formulations that reach HIV cellular reservoirs need be created. In a step towards achieving this goal we harnessed the aggregation-induced emission (AIE) property of the non-nucleoside reverse transcriptase inhibitor rilpivirine (RPV) and used it as a platform for drug cell and subcellular tracking. RPV nanocrystals were created with endogenous AIE properties enabling the visualization of intracellular particles in cell and tissue-based assays. The intact drug crystals were easily detected in CD4⁺ T cells and macrophages, the natural viral target cells, by flow cytometry and ultraperformance liquid chromatography tandem mass spectrometry. We conclude that AIE can be harnessed to monitor cell biodistribution of selective antiretroviral drug nanocrystals.

Nanoparticles for antiparasitic drug delivery

As an emerging novel drug carrier, nanoparticles provide a promising way for effective treatment of parasitic diseases by overcoming the shortcomings of low bioavailability, poor cellular permeability, nonspecific distribution and rapid elimination of antiparasitic drugs from the body. In recent years, some kinds of ideal nanocarriers have been developed for antiparasitic drug delivery. In this review, the progress of the enhanced antiparasitic effects of different nanoparticles payload and their influencing factors were firstly summarized. Secondly, the transport and disposition process in the body were reviewed. Finally, the challenges and prospects of nanoparticles for antiparasitic drug delivery were proposed. This review will help scholars to understand the development trend of nanoparticles in the treatment of parasitic diseases and explore strategies in the development of more efficient nanocarriers to overcome the difficulty in the treatment of parasite infections in the future.

Internal Structure of Nanometer-Sized Droplets Prepared by Antisolvent Precipitation

Antisolvent precipitation (AP) is a low-cost and less-invasive preparation alternative for organic nanoparticles compared to top-down methods such as high-pressure homogenization or milling. Here we report on particularly small organic nanoparticles (NPs) prepared by AP. It has been found for various materials that these NPs in their liquid state exhibit a significant degree of molecular order at their interface toward the dispersion medium including ubiquinones (coenzyme Q10), triglycerides (trimyristin, tripalmitin), and alkanes (tetracosane). This finding is independent of the use of a stabilizer in the formulation. While this is obviously a quite general interfacial structuring effect, the respective structural details of specific NPs systems might differ. Here, a detailed structural characterization of very small liquid coenzyme Q10 (Q10) NPs is presented as a particular example for this phenomenon. The Q10 NPs have been prepared by AP in the presence of two different stabilizers, sodium dodecyl sulfate (SDS) and pentaethylene glycol monododecyl ether (C₁₂E₅), respectively, and without any stabilizer. The NPs' size is initially analyzed by photon correlation spectroscopy (PCS). The SDS-stabilized Q10 NPs have been studied further by differential scanning calorimetry (DSC), small-angle X-ray and neutron scattering (SAXS, SANS), wide-angle X-ray scattering (WAXS), and cryogenic transmission electron microscopy (CryoTEM). A simultaneous analysis of SAXS and contrast variation SANS studies revealed the molecular arrangement within the interface between the NPs and the dispersion medium. The Q10 NPs stabilized by SDS and C₁₂E₅, respectively, are small (down to 19.9 nm) and stable (for at least 16 months) even when no stabilizer is used. The SDS-stabilized Q10 NPs reported here, are therewith, to the best of our knowledge, the smallest organic NPs which have been reported to be prepared by AP so far. In particular, these NPs exhibit a core-shell structure consisting of an amorphous Q10 core and a surrounding shell, which is mainly composed of oriented Q10 molecules and aligned SDS molecules. This structure suggests a significant amphiphilic behavior and a rather unexpected stabilizing role of Q10 molecules.

Orphan Formulations in Pediatric Schistosomiasis Treatment: Development and Characterization of Praziquantel Nanoparticle-Loaded Powders for Reconstitution

Praziquantel is a broad spectrum antihelmintic agent and represents the drug of choice for the treatment of schistosomiasis. However, its low aqueous solubility and strong bitter taste highly affect the bioavailability and compliance in pediatric patients. Thus, the purpose of this study was to develop a dry nanosuspension, by a combination of high-pressure homogenization and spray drying, intended for redispersion in a pleasant taste vehicle for extemporaneous use. Three formulations, varying stabilizers to drug ratio, were developed and characterized in terms of particle size distribution, crystallinity, morphology, in vitro dissolution, and sedimentation-redispersibility behavior. A significant reduction in particle size was achieved after the high-pressure homogenization process, and the nanoparticles were further microencapsulated by spray drying technique. The redispersed dried powders exhibited a conserved particle size distribution (in the nanometric range) and certain crystallinity extent, with satisfactory redispersion ability. Besides, the enhancement of the dissolution performance obtained after comminution was conserved, even after drying and redispersion of the extemporaneous powdered formulation. In conclusion, the developed nanoparticle-loaded powders comprise an interesting tool for the administration of praziquantel to preschool-age children.