Poly(silsesquioxanes) and poly(siloxanes) grafted with N-acetylcysteine for eradicating mature bacterial biofilms in water environment

Silicones for Maxillofacial Prostheses and Their Modifications in Service

The biomedical applications of silicones are countless due to their outstanding properties. In dentistry, silicone for maxillofacial and plastic surgery has become indispensable, from both physiological and aesthetic points of view. In this mini-review, silicone materials for dentistry and facial prostheses are discussed, focusing on their properties and alterations when exposed for long periods to different environments. A significant number of studies reported in the literature have been conducted in vitro, mimicking some of the main degradative factors which have been identified as triggers for discoloration and deterioration of the mechanical properties. Among these, in artificial aging and accelerated natural aging studies, UV radiation is considered the most important. Other weathering factors, biological contamination, and disinfection agents may have dramatic effects as well. Several general properties of silicones are described at the beginning, with a focus on biocompatibility, cross-linking mechanisms, and applications in dentistry and maxillofacial prosthetics. We discuss the ongoing cross-linking and/or possible exudation after manufacturing, which also affects the stability of the prosthesis over time, and possibly the patient. Next, the main environmental factors that affect the prostheses in service are presented, including the role of cigarettes smoke, which has been discussed very little so far. A few aspects, such as biofilm formation, its negative effects, and proposed solutions to overcome this phenomenon regarding silicones, are also described. We conclude by proposing a set of topics for future research and development based on the gaps that have been identified in the literature. Although silicones are probably irreplaceable in maxillofacial prosthetics, improvements in terms of base materials, additives, surface treatments, and maintenance are possible and necessary for long-lasting and safer prostheses.

Self-Healing Antimicrobial Silicones-Mechanisms and Applications

Organosilicon polymers (silicones) are an important part of material chemistry and a well-established commercial product segment with a wide range of applications. Silicones are of enduring interest due to their unique properties and utility. Recently, new application areas for silicone-based materials have emerged, such as stretchable electronics, wearable stress sensors, smart coatings, and soft robotics. For this reason, research interest over the past decade has been directed towards new methods of crosslinking and increasing the mechanical strength of polyorganosiloxanes. The introduction of self-healing mechanisms may be a promising alternative for such high-value materials. This approach has gained both growing research interest and a rapidly expanding range of applications. Inherent extrinsic and intrinsic self-healing methods have been used in the self-healing of silicones and have resulted in significant advances in polymer composites and coatings, including multicomponent systems. In this review, we present a summary of research work dedicated to the synthesis and applications of self-healing hybrid materials containing polysiloxane segments, with a focus on antimicrobial and antifouling coatings.

N-acetylcysteine (NAC) attenuates quorum sensing regulated phenotypes in Pseudomonas aeruginosa PAO1

The expression of many virulence genes in bacteria is regulated by quorum sensing (QS), and the inhibition of this mechanism has been intensely investigated. N-acetylcysteine (NAC) has good antibacterial activity and is able to interfere with biofilm-related respiratory infections, but little is known whether this compound has an effect on bacterial QS communication. This work aimed to evaluate the potential of NAC as a QS inhibitor (QSI) in Pseudomonas aeruginosa PAO1 through in silico and in vitro analyses, as well as in combination with the antibiotic tobramycin. Initially, a molecular docking analysis was performed between the QS regulatory proteins, LasR and RhlR, of P. aeruginosa with NAC, 3-oxo-C12-HSL, C4-HSL, and furanone C30. The NAC sub-inhibitory concentration was determined by growth curves. Then, we performed in vitro tests using the QS reporter strains P. aeruginosa lasB-gfp and rhlA-gfp, as well as the expression of QS-related phenotypes. Finally, the synergistic effect of NAC with the antibiotic tobramycin was calculated by fractional inhibitory concentrations index (FIC_i) and investigated against bacterial growth, pigment production, and biofilm formation. In the molecular docking study, NAC bound to LasR and RhlR proteins in a similar manner to the AHL cognate, suggesting that it may be able to bind to QS receptor proteins in vivo. In the biosensor assay, the GFP signal was turned down in the presence of NAC at 1000, 500, 250, and 125 μM for lasB-gfp and rhlA-gfp (p < 0.05), suggesting a QS inhibitory effect. Pyocyanin and rhamnolipids decreased (p < 0.05) up to 34 and 37%, respectively, in the presence of NAC at 125 μM. Swarming and swimming motilities were inhibited (p < 0.05) by NAC at 250 to 10000 μM. Additionally, 2500 and 10000 μM of NAC reduced biofilm formation. NAC-tobramycin combination showed synergistic effect with FIC_i of 0.8, and the best combination was 2500-1.07 μM, inhibiting biofilm formation up to 60%, besides reducing pyocyanin and pyoverdine production. Confocal microscopy images revealed a stronger, dense, and compact biofilm of P. aeruginosa PAO1 control, while the biofilm treated with NAC-tobramycin became thinner and more dispersed. Overall, NAC at low concentrations showed promising anti-QS properties against P. aeruginosa PAO1, adding to its already known effect as an antibacterial and antibiofilm agent.

Hybrid Bio-Based Silicone Coatings with Anti-adhesive Properties

Hybrid polysiloxanes and polysilsesquioxanes grafted with naturally occurring bioactive phytochemicals: eugenol and linalool, were synthesized and investigated with regard to their structure and properties. The two series of materials, differing in the type of inorganic structure and the content of active groups, were coated onto the surface of glass plates, and their antibiofilm activities against bacteria Aeromonas hydrophila were assessed by luminometry and fluorescence microscopy. Bioactivity was correlated with specific properties of the hybrid coatings (chemical structure, surface free energy and adhesiveness). The functionalized polysilsesquioxanes exhibited the most favorable anti-adhesive effects. Cell adhesion after 6 days of incubation, expressed as RLU/cm², was significantly reduced (44 and 67 for, respectively, Z-E-100 and Z-L-100, compared to 517 for the control glass carrier). The surface stickiness of polysiloxane films deteriorated their anti-adhesion properties, despite the presence of a large amount of bioactive species.

Antibacterial Activity Assessment of Bi2WO6/Ag3PO4/Ag Photocatalyst and Persian Oak fruit Phytobiotic

The antibacterial effect of the previously reported Bi2WO6/Ag3PO4/Ag Z-scheme heterojunction photocatalyst compared with a phytobiotics named, aqueous extract of Persian Oak fruit. The impact of both materials on the expression of the urease gene was checked in two kinds of samples such as clinical and standard Helicobacter pylori (H. pylori). The gene expression differences were collected by real-time PCR from clinical strains and the standard of H. pylori as well as the MIC and MBC were found to be 3.1 and 0.8 mg/mL, and 6.2 and 1.6 mg/mL, for Bi2WO6/Ag3PO4/Ag photocatalyst and Oak fruit Phytobiotics, respectively. Due to the impact of Oak fruit extract on the urease gene of H. pylori, it is possible to use it as a disinfector against this bacterium and the proposed photocatalyst, for efficiently purifying H. pylori bacteria from contaminated environment.

Effects of cinnamaldehyde against planktonic bacteria and biofilm formation of Shigella flexneri

Cinnamaldehyde (CA) has demonstrated anti-inflammatory, anti-tumor and anti-cancer activities; Its antimicrobial and antibiofilm actions against Shigella flexneri, on the other hand, have not been investigated. Sh. flexneri is a gram-negative foodborne pathogen that can be widely found in nature and some industrial production environments. In this current research, our aim was to examine the influences of CA on planktonic bacteria and biofilm formation. The minimum inhibitory concentration (MIC) of CA against Sh. flexneri strain was 100 μg/mL, while bacteria treated with CA showed a longer lag phase compared with the untreated control. CA effectively inactivated the Sh. flexneri in LB broth and fresh lettuce juice. CA treatment resulted in cell membrane permeability changes and dysfunction, as proven by cell membrane depolarization, decreased intracellular ATP concentration. In addition, CA was also discovered to increase the level of reactive oxygen species (ROS) in cells, and induce morphological changes in cells. Crystal violet staining showed that the biomass of biofilm was decreased significantly with CA in 24 h. Light microscopy and field emission scanning electron microscopy (FESEM) observations demonstrated decreased biofilm adhesion and destruction of biofilm architecture after treatment with CA. These findings indicated that CA acts as a natural bacteriostatic agent to control Sh. flexneri in food processing and production.

The Use of the Thiol-Ene Addition Click Reaction in the Chemistry of Organosilicon Compounds: An Alternative or a Supplement to the Classical Hydrosilylation?

This review presents the main achievements in the use of the thiol-ene reaction in the chemistry of silicones. Works are considered, starting from monomers and ending with materials.The main advantages and disadvantages of this reaction are demonstrated using various examples. A critical analysis of the use of this reaction is made in comparison with the hydrosilylation reaction.

Nanoconjugates based on a novel organic-inorganic hybrid silsesquioxane and gold nanoparticles as hemocompatible nanomaterials for promising biosensing applications

A new hybrid organic-inorganic silsesquioxane material, 3-n-propyl(2-amino-4-methyl)pyridium chloride (SiAMPy⁺Cl^-), was synthesized and successfully applied for the synthesis of stable nanoconjugates with gold nanoparticles (AuNPs-SiAMPy⁺). SiAMPy⁺Cl^- was obtained through a simple sol-gel procedure by using chloropropyltrimetoxysilane and tetraethylorthosilicate as precursors and 2-amino-4-methylpyridine as the functionalizing agent. The resulting material was characterized by employing FTIR, XRD, and ¹H-, ¹³C-, and ²⁹Si-NMR spectroscopy. The synthesis of AuNPs-SiAMPy⁺ nanoconjugates was optimized through a 2³ full factorial design. UV-VIS, FTIR, TEM, DLS, and ζ-potential measurements were used to characterize the nanoconjugates, which presented a spherical morphology with an average diameter of 5.8 nm. To investigate the existence of toxic effects of AuNPs-SiAMPy⁺ on blood cells, which is essential for their future biomedical applications, toxicity assays on human erythrocytes and leukocytes were performed. Interestingly, no cytotoxic effects were observed for both types of cells. The nanoconjugates were further applied in the construction of electrochemical immunosensing devices, aiming the detection of anti-Trypanosoma cruzi antibodies in serum as biomarkers of Chagas disease. The AuNPs-SiAMPy⁺ significantly enhanced the sensitivity of the biodevice, which was able to discriminate between anti-T. cruzi positive and negative serum samples. Thus, the AuNPs-SiAMPy⁺-based biosensor showed great potential to be used as a new tool to perform fast and accurate diagnosis of Chagas disease. The promising findings described herein strongly confirm the remarkable potential of SiAMPy⁺Cl^- to obtain nanomaterials, which can present notable biomedical properties and applications.

Antibacterial Polysiloxane Polymers and Coatings for Cochlear Implants

Within this study, new materials were synthesized and characterized based on polysiloxane modified with different ratios of N-acetyl-l-cysteine (NAC) and crosslinked via UV-assisted thiol-ene addition, in order to obtain efficient membranes able to resist bacterial adherence and biofilm formation. These membranes were subjected to in vitro testing for microbial adherence against S. pneumoniae using standardized tests. WISTAR rats were implanted for 4 weeks with crosslinked siloxane samples without and with NAC. A set of physical characterization methods was employed to assess the chemical structure and morphological aspects of the new synthetized materials before and after contact with the microbiological medium.

Toxicity mitigation by N-acetylcysteine and synergistic toxic effect of nano and bulk ZnO to Panagrellus redivivus

To better understand the nanosize-relevant toxic effects and underlying mechanisms, N-acetylcysteine (NAC), as a mitigation agent, an ionic form of Zn (ZnCl₂), and the binary mixture of ZnO with different particle sizes (15 nm and 140 nm), was used in toxicity assays with the nematode Panagrellus redivivus. The ZnCl₂ concentrations were applied to show the amount of dissolved Zn ions present in the test system. Reactive oxygen species (ROS) measuring method was developed to fit the used test system. Our studies have shown that NAC can mitigate the toxic effects of both studied particle sizes. In the applied concentrations, ZnCl₂ was less toxic than both of the ZnO particles. This finding indicates that not only ions and ROS produced by the dissolution are behind the toxic effects of the ZnO NPs, but also other particle size-dependent toxic effects, like the spontaneous ROS generation, are also relevant. When the two materials were applied in binary mixtures, the toxic effects increased significantly, and the dissolved zinc content and the ROS generation also increased. It is assumed that the chemical and physical properties of the materials have been mutually reinforcing to form a more reactive mixture that is more toxic to the P. redivivus test organism. Our findings demonstrate the importance of using mitigation agent and mixtures to evaluate the size-dependent toxicity of the ZnO.

pH-tunable nanoparticles composed of copolymers of lactide and allyl-glycidyl ether with various functionalities for the efficient delivery of anti-cancer drugs

The designing of biocompatible nanocarriers for the efficient delivery of their cargos to the desired targets remains a challenge. In this regard, the most promising strategy relies on the construction of pH- or thermo-responsive nanoparticles (NPs). However, it is also important to preserve the balance between the responsiveness of the carrier and their stability in physiological conditions. Therefore, we described a new family of copolymers of lactide and allyl-glycidyl ether which were subsequently modified by thiol-ene reaction to functionalize the resulting copolymer with acetylcysteine (ACC) or thioglycolic acid (tGA) moieties. Subsequently, these copolymers were used to obtain blank and doxorubicin (DOX) loaded NPs with an average diameter of about 50-100 nm. Interestingly, the NPs were stable in different pH conditions, however, the presence of ACC or tGA units in the polymeric chain allows for the reduction of the undesired burst release due to the supramolecular interactions between polymeric pedant groups and DOX. The release tests of DOX from NPs showed that DOX release rate decrease depending on the pH values and the copolymer functionalization in order of non-modified NPs > ACC-modified NPs > tGA functionalized NPs. Most importantly, the MTT assay showed that all blank NPs are non-toxic against the normal L929 cell line. Subsequently, the antitumor efficiency of the obtained NPs was tested towards L929 (murine fibroblast cell line), HeLa (cervical cancer), and AGS (human gastric adenocarcinoma cancer) cells. The results demonstrated that DOX-loaded NPs efficiently induce the reduction in the viability of the HeLa and AGS cell, and this reduction in the viability was even below 20 % for the AGS cells. Together with their biocompatibility, the obtained NPs offer a novel route for the preparation of nanocarriers for the controlled and efficient delivery of anticancer drugs.

New Antiadhesive Hydrophobic Polysiloxanes

Intrinsic hydrophobicity is the reason for efficient bacterial settlement and biofilm growth on silicone materials. Those unwelcomed phenomena may play an important role in pathogen transmission. We have proposed an approach towards the development of new anti-biofilm strategies that resulted in novel antimicrobial hydrophobic silicones. Those functionalized polysiloxanes grafted with side 2-(carboxymethylthioethyl)-, 2-(n-propylamidomethylthioethyl)- and 2-(mercaptoethylamidomethylthioethyl)- groups showed a wide range of antimicrobial properties towards selected strains of bacteria (reference strains Staphylococcus aureus, Escherichia coli and water-borne isolates Agrobacterium tumefaciens, Aeromonas hydrophila), fungi (Aureobasidium pullulans) and algae (Chlorella vulgaris), which makes them valuable antibacterial and antibiofilm agents. Tested microorganisms showed various levels of biofilm formation, but particularly effective antibiofilm activity was demonstrated for bacterial isolate A. hydrophila with high adhesion abilities. In the case of modified surfaces, the relative coefficient of adhesion for this strain was 18 times lower in comparison to the control glass sample.

Siloxanes-Versatile Materials for Surface Functionalisation and Graft Copolymers

Siloxanes are adaptable species that have found extensive applications as versatile materials for functionalising various surfaces and as building blocks for polymers and hybrid organic-inorganic systems. The primary goal of this review is to report on and briefly explain the most relevant recent developments related to siloxanes and their applications, particularly regarding surface modification and the synthesis of graft copolymers bearing siloxane or polysiloxane segments. The key strategies for both functionalisation and synthesis of siloxane-bearing polymers are highlighted, and the various trends in the development of siloxane-based materials and the intended directions of their applications are explored.

Farnesol-Containing Macromolecular Systems for Antibiofilm Strategies

Farnesol is a natural sesquiterpenoid and an interesting quorum-sensing molecule. Its insolubility in water is the biggest obstacle to its application for bacterial biofilm treatments since it compromises the bioavailability. Recently, an increasing interest in farnesol encapsulation or loading in polymeric materials may be noted due to the prolonged action of the active macromolecular systems. In this short review, we present an overview of methods leading to improved interactions between farnesol and microbial biofilms.

Anti-biofilm investigation of graphene/chitosan nanocomposites against biofilm producing P. aeruginosa and K. pneumoniae

In this study graphene/chitosan nanoparticles (GR/CS NCs) were developed. The homogenous combination of GR and CS was confirmed by FTIR spectroscopy. The combination of CS with GR sheets reduced the XRD intensity of the GR peak in GR/CS NCs, while TEM images revealed the immobile CS coating of GR sheets. Further, the anti-biofilm activity of GR/CS NCs was tested. The tests showed that the formation of biofilm by Pseudomonas aeruginosa and Klebsiella pneumoniae was inhibited at 40□g/mL GR/CS NCs up to 94 and 92 %, respectively. The intracellular and cell surface damage of the bacteria was observed by CLSM and SEM. Also, GR/CS NCs produced a toxic effect of 90 % on Artemia franciscana at 70□g/mL upon 24 h incubation. The recorded properties of the synthesized GR/CS NCs qualify them as potential agents against multi-drug resistant bacteria.

Antimicrobial and Antibiofilm N-acetyl-L-cysteine Grafted Siloxane Polymers with Potential for Use in Water Systems

Antibiofilm strategies may be based on the prevention of initial bacterial adhesion, the inhibition of biofilm maturation or biofilm eradication. N-acetyl-L-cysteine (NAC), widely used in medical treatments, offers an interesting approach to biofilm destruction. However, many Eubacteria strains are able to enzymatically decompose the NAC molecule. This is the first report on the action of two hybrid materials, NAC-Si-1 and NAC-Si-2, against bacteria isolated from a water environment: Agrobacterium tumefaciens, Aeromonas hydrophila, Citrobacter freundii, Enterobacter soli, Janthinobacterium lividum and Stenotrophomonas maltophilia. The NAC was grafted onto functional siloxane polymers to reduce its availability to bacterial enzymes. The results confirm the bioactivity of NAC. However, the final effect of its action was environment- and strain-dependent. Moreover, all the tested bacterial strains showed the ability to degrade NAC by various metabolic routes. The NAC polymers were less effective bacterial inhibitors than NAC, but more effective at eradicating mature bacterial biofilms.