Characterization of interactions between whey protein isolate and hyaluronic acid in aqueous solution: Effects of pH and mixing ratio

Phase behavior and interaction of strong polyelectrolyte dextran sulfate and whey protein isolation: Effects of pH, protein/polysaccharide ratio, and salt addition

The strong polyelectrolyte dextran sulfate (DS) is an anionic polysaccharide with a high negative charge, characterized by high stability and pH independence. DS and whey protein isolate (WPI) were selected to study the specific effects of highly negatively charged polysaccharides on the phase behavior and interaction of WPI/DS complexes (1 % w/v) under varying external conditions (pH, WPI:DS ratio, and salt addition). The phase diagrams, zeta potential, and laser confocal scanning microscopy measurements indicated that the WPI/DS complexes did not dissociate even at pH 1 due to the pH independence of DS. The exclusion volume effect of DS promoted WPI self-aggregation at high salt concentrations, which inhibited acidification-induced dissociation. Isothermal titration calorimetry indicated that the WPI/DS interaction is a spontaneous exothermic reaction driven by both enthalpy and entropy changes due to electrostatic interactions. This study provides valuable information on the interactions between highly negatively charged polysaccharides and proteins.

Hyaluronic acid promotes heat-induced gelation of ginkgo seed proteins

This study aimed to investigate how varying concentrations (0.01-0.5 %, w/v) and molecular weights (50, 500, 1500 kDa) of hyaluronic acid (HA) affect the physicochemical properties of heat-induced ginkgo seed protein isolate (GSPI)-HA composite gel. Incorporating HA increased viscosity (up to 14 times) and charge (up to 23 %) of GSPI-HA aggregates, while reducing particle size (up to 31 %) and improving gel texture, particularly with high molecular weight HA. However, high concentrations (0.5 %, w/v) of HA weakened gel texture. Non-covalent bonds primarily drive the formation of a continuous gel network between HA and GSPI, resulting in small pores and enhanced hydration properties. With increasing HA molecular weight, non-covalent interactions between GSPI and HA increased, leading to improved gel thermal stability. Overall, the study suggests that manipulating the molecular weight and concentration of HA can enhance the gelling properties of GSPI, leading to the development of a diverse array of GSPI-HA composite gels with varied properties.

Structural modification of whey protein isolate via electrostatic complexation with Tremella polysaccharides and its effect on emulsion stability at pH 4.5

Emulsions play an important role in food systems by encapsulating and delivering active compounds, but maintaining their stability under various conditions can be challenging. This study explored how the concentrations of Tremella polysaccharides (TPs) (0-0.75 %) affects the structural of whey protein isolate (WPI) and the stability of their emulsions at pH 4.5. At this pH, electrostatic interactions between WPI and TPs exposed hydrophobic groups within the protein, increased β-sheet contents, and improved the hydrophilic-hydrophobic balance, which enhanced emulsifying performance. WPI-TPs complexes (WTS) showed a high emulsifying activity index (57.85 m2/g) and emulsion stability index (82.03 %). Compared to WPI-only emulsions, WTS emulsions had smaller particle sizes, lower Turbiscan Stability Index (TSI) values, and higher viscoelasticity, thermal stability, freeze-thaw stability, and re-emulsification capacity. Importantly, when the TPs concentration in WTS emulsions exceeded 0.375 %, the TSI value dropped below 1, showing no particle migration or peak thickness, indicating full emulsion stability. These findings suggest that TPs help stabilize WPI emulsions near their isoelectric point (pH 4.5) and offer a promising approach to improving WPI functionality in acidic environments. The WTS system provides a reliable way to stabilize emulsions under acidic conditions, supporting the development of natural, stable emulsifiers for food applications.

Effect of ultrasonic treatment on the structure and emulsification properties of soybean isolate protein-hyaluronic acid complexes and the stability of their loaded astaxanthin emulsions

The purpose of this work was to prepare an astaxanthin emulsion stabilized by a soybean isolate protein (SPI)-hyaluronic acid (HA) complex and to investigate its protective effect on astaxanthin. In order to examine the impact of various ultrasonic energies (0 W-300 W) on the structural characteristics of the complex and the stability of the emulsion, the SPI-HA complex was created via ultrasonography. The findings demonstrated that ultrasonication may had an impact on the hydrophobic, electrostatic, and hydrogen bonding interactions between SPI and HA, which caused the protein structure to unfold and reveal the interior hydrophobic amino acid residues. Moreover, ultrasonication enhanced the emulsification qualities of SPI-HA complexes by lowering their average particle size. The rheological findings demonstrated that the emulsion's viscosity and energy storage modulus (G') were considerably decreased by the ultrasonic treatment. The appearance of the emulsions and optical microscopy results further indicated that the emulsions prepared from SPI-HA had superior storage stability, pH stability, and light stability compared to pure SPI. SPI-HA exhibited superior emulsion stability and lower particle size at 150 W ultrasonic power. The AST incorporated in the emulsion was also well protected. The emulsion effectively slows down the degradation of AST. The findings of this study may help create more robust and natural emulsion delivery systems that guarantee the continuous or regulated release of lipophilic bioactive compounds.

Effects of thermal treatment on the formation and properties of whey protein isolate/whey protein hydrolysate-sodium hyaluronate complexes

In dairy products, the added sodium hyaluronate may form complexes with proteins, thereby affecting product properties. In the present study, the interaction between whey protein isolate (WPI)/ whey protein hydrolysate (WPH) and sodium hyaluronate (SH) was characterized under thermal treatment at different temperatures (25 ℃, 65 ℃, 90 ℃ and 121 ℃) after studying effects of protein/SH ratio and pH on complex formation. The addition of SH reduced the particle size of WPI/WPH and increased potential value in the system, with greater variation with increasing treatment temperature. The structural properties of complexes were studied. The binding with SH decreased the contents of free amino group and free thiol group, as well as the fluorescence intensity and surface hydrophobicity. FTIR results and browning intensity measurement demonstrated the formation of Maillard reaction products. Moreover, the attachment of SH improved the thermal stability of WPI/WPH and decreased their antigenicity.

The non-covalent and covalent interactions of whey proteins and saccharides: influencing factor and utilization in food

During the application of Whey proteins (WPs), they often have complex interactions with saccharides (Ss), another important biopolymer in food substrate. The texture and sensory qualities of foods containing WPs and Ss are largely influenced by the interactions of WPs-Ss. Moreover, the combination of WPs and Ss is possible to produce many excellent functional properties including emulsifying properties and thermal stability. However, the interactions between WPs-Ss are complex and susceptible to some processing conditions. In addition, with different interaction ways, they can be applied in different fields. Therefore, the non-covalent interaction mechanisms between WPs-Ss are firstly summarized in detail, including electrostatic interaction, hydrogen bond, hydrophobic interaction, van der Waals force. Furthermore, the existence modes of WPs-Ss are introduced, including complex coacervates, soluble complexes, segregation, and co-solubility. The covalent interactions of WPs-Ss in food applications are often formed by Maillard reaction (dry or wet heat reaction) and occasionally through enzyme induction. Then, two common influencing factors, pH and temperature, on non-covalent/covalent bonds are introduced. Finally, the applications of WPs-Ss complexes and conjugations in improving WP stability, delivery system, and emulsification are described. This review can improve our understanding of the interactions between WPs-Ss and further promote their wider application.

Preparation and characterization of tilapia protein isolate - Hyaluronic acid complexes using a pH-driven method for improving the stability of tilapia protein isolate emulsion

This study aimed to investigate the non-covalent complexation between hyaluronic acid (HA) and tilapia protein isolate (TPI) on the stability of oil-in-water (O/W) TPI emulsion. The results showed that HA binds to TPI through electrostatic, hydrophobic, and hydrogen bonding interactions, forming homogeneous hydrophilic TPI-HA complexes. The binding of HA promoted the structural folding of TPI and altered its secondary structure during pH neutralization. The TPI-HA complexes presented significantly improved EAI and ESI (P < 0.05) when the HA concentration was 0.8 % (w/v). Emulsion characterization showed that HA promoted the transfer of TPI to the O/W interface, forming an emulsion with excellent stability, which, combined with the high surface charge and strong spatial site resistance effect of HA, improved TPI emulsion stability. Therefore, non-covalent complexation with HA is an effective strategy to improve the stability of TPI emulsion.

Whey Protein Isolate as a Substrate to Design Calendula officinalis Flower Extract Controlled-Release Materials

The use of natural active substances and the development of new formulations are promising directions in the cosmetic and pharmacy industries. The primary purpose of this research was the production of microparticles based on whey protein isolate (WPI) and calcium alginate (ALG) containing Calendula officinalis flower extract and their incorporation into films composed of gelatin, WPI, and glycerol. Both swollen and dry microparticles were studied by optical microscopy and their sizes were measured. Water absorption by the microparticles, their loading capacity, and the release profile of flower extract were also characterized. The films were analyzed by mechanical tests (Young's modulus, tensile strength, elongation at break), swelling capacity, contact angle, and moisture content measurements. The presented data showed that the active ingredient was successfully enclosed in spherical microparticles and completely released after 75 min of incubation at 37 °C. The incorporation of the microparticles into polymer films caused a decrease in stiffness and tensile strength, simultaneously increasing the ductility of the samples. Moreover, the films containing microparticles displayed higher swelling ability and moisture content compared to those without them. Hence, the materials prepared in this study with Calendula officinalis flower extract encapsulated into polymeric microspheres can be a starting point for the development of new products intended for skin application; advantages include protection of the extract against external factors and a controlled release profile.

Combination of Machine Learning and Raman Spectroscopy for Determination of the Complex of Whey Protein Isolate with Hyaluronic Acid

Macromolecules and their complexes remain interesting topics in various fields, such as targeted drug delivery and tissue regeneration. The complex chemical structure of such substances can be studied with a combination of Raman spectroscopy and machine learning. The complex of whey protein isolate (WPI) and hyaluronic acid (HA) is beneficial in terms of drug delivery. It provides HA properties with the stability obtained from WPI. However, differences between WPI-HA and WPI solutions can be difficult to detect by Raman spectroscopy. Especially when the low HA (0.1, 0.25, 0.5% w/v) and the constant WPI (5% w/v) concentrations are used. Before applying the machine learning techniques, all the collected data were divided into training and test sets in a ratio of 3:1. The performances of two ensemble methods, random forest (RF) and gradient boosting (GB), were evaluated on the Raman data, depending on the type of problem (regression or classification). The impact of noise reduction using principal component analysis (PCA) on the performance of the two machine learning methods was assessed. This procedure allowed us to reduce the number of features while retaining 95% of the explained variance in the data. Another application of these machine learning methods was to identify the WPI Raman bands that changed the most with the addition of HA. Both the RF and GB could provide feature importance data that could be plotted in conjunction with the actual Raman spectra of the samples. The results show that the addition of HA to WPI led to changes mainly around 1003 cm-1 (correspond to ring breath of phenylalanine) and 1400 cm-1, as demonstrated by the regression and classification models. For selected Raman bands, where the feature importance was greater than 1%, a direct evaluation of the effect of the amount of HA on the Raman intensities was performed but was found not to be informative. Thus, applying the RF or GB estimators to the Raman data with feature importance evaluation could detect and highlight small differences in the spectra of substances that arose from changes in the chemical structure; using PCA to filter out noise in the Raman data could improve the performance of both the RF and GB. The demonstrated results will make it possible to analyze changes in chemical bonds during various processes, for example, conjugation, to study complex mixtures of substances, even with small additions of the components of interest.

Effect of Different Molecular Weight Hyaluronic Acids on Skim Milk Functional Properties

Hyaluronic acid (HA), a naturally occurring polysaccharide with recognized health benefits, has gained approval for use in the food industry as a food additive, ingredient, and health supplement in numerous countries. HA can increase viscosity in solutions and is available commercially in various molecular weights (MW) depending on end applications. Nevertheless, no research has explored the impact of different MW HAs on functionality, rheological properties, and texture-building benefits in the dairy product matrix wherein they are incorporated. Therefore, the objective of this study was to evaluate how varying MWs of HA-specifically 8 kDa, 320 kDa, 980 kDa, and 2550 kDa at 0.25% (w/w) concentration-impact rheological characteristics, functional attributes, heat stability, protein stability, protein structure, and protein fractions within skim milk. The addition of HA led to an increase in the apparent viscosity of all samples. A higher G″ value over G' values for all HA samples was observed in frequency sweep, indicating the absence of interparticle interactions between HA particles. Protein stability and heat stability were significantly lower for 980 kDa and 2550 kDa HA as compared to the control and 8 kDa HA samples. As the MW increased, WHC, emulsion properties, and foaming stability notably increased. However, reversed results were found in the case of foaming activity. Moreover, no significant changes were observed in the percent area of individual protein fractions and the hydrodynamic diameter of protein particles. This study would help to understand the effect of HA when incorporated in dairy products for water binding or enhancement in viscosity-based applications.

Quinoa protein/polysaccharide electrostatic complex stabilized vegan high internal phase emulsions for 3D printing: Role of complex state and gelling-type polysaccharides

Rational selection of the complex state and polysaccharide type may enhance the performance of electrostatic complex stabilized high internal phase emulsions (HIPEs). Herein, quinoa proteins were extracted to form electrostatic complexes separately with three gelling-type polysaccharides to fabricate HIPEs. Results showed that the complexes in soluble state (pH 8.4-5.6) exhibited moderate size, high negative potential and enhanced protein hydrophobicity, and could achieve HIPEs with 84% oil phase upon acidification to pH 6 at low concentrations. Its excellent interfacial structure enhanced stability during heating, freeze-thawing and long-term storage, and exhibited promising 3D printing potential. Furthermore, the complexes formed by sulfated polysaccharide carrageenan had higher amphiphilicity than those formed by carboxylated polysaccharide pectin or sodium alginate, and their stabilized HIPE had preferable droplet size, stability and 3D printing resolution than its counterparts. This study may provide new insights into the performance enhancement of protein/polysaccharide electrostatic complex stabilized HIPEs.

Analysis of non-covalent interaction between β-lactoglobulin and hyaluronic acid under ultrasound-assisted treatment: Conformational structures and interfacial properties

Hyaluronic acid (HA) used as a food ingredient is gaining acceptance and popularity. However, the studies available for the effect of HA concentrations on the properties of β-lactoglobulin (β-LG) were limited. In this study, we investigated that the molecular characterization and functional properties of the complex formed by the non-covalent binding of β-LG and HA, as well as the ultrasound-assisted treatment at acidic pH. The optimal pH and ratio of β-LG/HA were set as 7 and 4:1, respectively. The fluorescence spectroscopy, circular dichroism spectroscopy, and molecular docking results revealed that the addition of HA and ultrasound induced a decrease in random coil and α-helix and an increase in β-sheet contents in β-LG. By the complexation with HA, the thermal stability, freezing stability, and antioxidant properties of β-LG were all improved under ultrasound treatment. The results of the present study can be useful for the modulation of HA based biopolymer complexes and the exploitation as encapsulating or structuring agents in food industry.

Formation, stability and in vitro digestion of curcumin loaded whey protein/ hyaluronic acid nanoparticles: Ethanol desolvation vs. pH-shifting method

Curcumin (CUR) was encapsulated in whey protein isolate/hyaluronic acid (WPI/HA) electrostatic nanoparticles at pH 5.4, 4.4, 3.4 and 2.4 using ethanol desolvation (DNP) or pH-shifting (PSNP) method. The prepared nanoparticles were characterized and compared for physiochemical properties, structure, stability, and in vitro digestion. PSNPs had smaller particle size, more uniform distribution, and higher encapsulation efficiency than DNPs. Main driving forces involved for fabricating the nanoparticles were electrostatic forces, hydrophobic forces, and hydrogen bonds. PSNP exhibited better resistance towards salt, thermal treatment, and long-term storage while DNPs showed stronger protection for CUR against thermal degradation and photodegradation. Stability of nanoparticles increased with decreasing pH values. In vitro simulated digestion exhibited that DNPs had lower release rate of CUR in SGF and higher antioxidant activity of its digestion products. Data may provide a comprehensive reference for selection of loading approach when constructing nanoparticles based on proteins/polysaccharides electrostatic complexes.

The properties and formation mechanism of ovalbumin-fucoidan complex

The polymeric materials formed by proteins and polysaccharides through molecular interactions have attracted public attention. In this study, a novel binary complex consisting of ovalbumin (OVA) and fucoidan (FUC) was obtained by electrostatic self-assembly. The self-assembly properties and the formation mechanism of the OVA-FUC binary complex were investigated by changing the charging degree and density of complex through altering pH value and polysaccharides proportion. Structural changes during the OVA-FUC electrostatic self-assembly process were investigated by a phase diagram, ζ-potential, and particle size. The optimal conditions for preparing soluble OVA-FUC binary complex were determined by the protein retention rate and insoluble solids content. Results showed that the soluble OVA-FUC binary complex could be obtained at the pH of 3.5 to 5, and the insoluble OVA-FUC binary complex was generated at the pH of 2.5 to 3.5. The OVA-FUC binary complex (19 ± 0.29 mN/m) possessed a medium ability to reduce interfacial tension of the water-oil interface compared with OVA (15 ± 1.13 mN/m) and FUC (24 ± 0.3 mN/m), indicating that OVA-FUC binary complex has good amphiphilicity and can be applied as a potential pH-controlled emulsifier in function food systems for delivering bioactive substances.

Investigation on the emulsification mechanism in aqueous enzymatic extraction of edible oil from Schizochytrium sp

BACKGROUND

The interaction between emulsified substances and lipids generates an emulsification system during the extraction of microalgae edible oil by aqueous enzymatic method. This study aimed to resolve the dynamics of interfacial protein adsorption during the extraction of microalgae oil at different enzymatic times and the effect on the stability of the interfacial membrane formed by the proteins based on interfacial effects.

RESULTS

At 1.5 h of enzymatic hydrolysis, the molecular weights of the proteins/peptides were all below 35 kD. In addition, the protein-peptide structure was loose, with the lowest number of disulfide bonds, peak surface hydrophobicity, the highest number of residues, and disordered lipid acyl arrangement. At the same time, the physical stability of the emulsion was the lowest, and the interfacial membrane rupture was distinct. On excessive enzymatic hydrolysis (at 3.0 h), a more uniform interfacial membrane was re-formed on the lipid surface.

CONCLUSION

Protein is the main emulsifying substance in the emulsification system. The addition of protease affects the stability of the interfacial membrane formed by proteins. In addition, sufficient enzymatic hydrolysis (1.5 h) inhibited emulsification, while excessive enzymatic hydrolysis (3.0 h) promoted emulsification. © 2023 Society of Chemical Industry.

Emulsions stabilised by casein and hyaluronic acid: Effects of high intensity ultrasound on the stability and vitamin E digestive characteristics

This study aimed to prepare an emulsion stabilised by an ultrasound-treated casein (CAS)-hyaluronic acid (HA) complex and to protect vitamin E during in vitro digestion. It was found that high-intensity ultrasound (HIU) treatment significantly changed the hydrogen bonding, electrostatic interaction and hydrophobic interaction between CAS and HA, reduced the particle size of the CAS-HA complex, increased the intermolecular electrostatic repulsion, and thus significantly improved the emulsifying properties of the CAS-HA complex. Meanwhile, the creaming index (CI) and confocal laser scanning microscopy images showed that the stability of the CAS-HA-stabilised emulsion was the best when treated at 150 W for 10 min, which could be attributed to the enhanced adsorption capacity of the CAS-HA complex at the oil-water interface and the viscosity of the formed emulsion. In vitro digestion experiments revealed that the emulsion stabilised by the ultrasound-treated CAS-HA complex had a good protective effect on vitamin E. This study is significant for the development of emulsions for the delivery of lipophilic nutrients.

A comparison of electrosprayed vs vortexed glycosaminoglycan-peptide nanoparticle platform for protection and improved delivery of therapeutic peptides

Therapeutic peptides capable of reducing inflammation via inhibition of the MAP kinase 2 pathway have the potential to reduce inflammation in atopic dermatitis by suppressing secretion of inflammatory cytokines by resident keratinocytes. One of the biggest hurdles to the use of therapeutic peptides, however, is their rapid degradation by intrinsic proteases and peptidases found in serum. Here we introduce a new nanoparticle technology that enhances and extends the bioactivity of a MAP KAP kinase 2 inhibitor peptide (MK2i) via electrostatic complexation with Dermatan sulfate (DS), a glycosaminoglycan, and explore their properties under various conditions. DS-MK2i nanoparticles can be made using electrospray ionization or sonication and vortexing with no stabilizing polymers or crosslinking. Average particle diameter, polydispersity index, and zeta potential were measured over a pH range of 2.5-11.5, in increments of 0.5, in water and at physiological ionic strength. Both particle types were shown to be shelf stable, robust, and behave differently in response to pH. They are also significantly more effective at suppressing cytokine secretion in inflamed, human keratinocytes than peptide alone in the presence of serum, providing a facile method of protecting peptides for therapeutic delivery in conditions such as atopic dermatitis, and abrogating the need for serum-starvation in in vitro testing.

Antioxidant activity and interactions between whey protein and polysaccharides from different parts of Houttuynia cordata

Houttuynia cordata polysaccharides (PSY) are known to exhibit a variety of beneficial activities, but these are currently not specifically utilized in food. Hence, using the two edible parts of Houttuynia cordata, a herbaceous plant native to Southeast Asia, this study developed polysaccharides of a stem (HCPS)-whey protein concentrate (WPC) complex and a leaf (HCPL)-WPC complex, and studied their stability, structure and antioxidant activity. The results showed that stability differed in complexes with different proportions, exhibiting only relative stability in the two complexes in which the ratio of HCPS-WPC and HCPL-WPC was 1:4, but increased stability in the HCPL-WPC complex (ζ-potential of HCPL-WPC: | -21.87 mv| >ζ-potential of HCPS-WPC: | -21.70 mv|). Structural characterization showed that there was electrostatic interaction between HCPS and WPC and between HCPL and WPC. The HCPL-WPC was found to have better antioxidant activity. The findings of this study, thus, provide a reference for the development of Houttuynia cordata polysaccharide applications in food.

Enhancing the stability of oil-in-water emulsions by non-covalent interaction between whey protein isolate and hyaluronic acid

This study aimed to investigate the effect of non-covalent interactions between different concentrations (0.1-1.2 %, w/v) of hyaluronic acid (HA) and 3 % (w/v) whey protein isolate (WPI) on the stability of oil-in-water emulsions. Non-covalent interactions between WPI and HA were detected using Fourier-transform infrared spectroscopy. The addition of HA increased the electrostatic repulsion between molecules and reduced the particle size of WPI. Circular dichroism spectroscopy results indicated that the addition of HA caused an increase in β-sheet content and a decrease in α-helix and random coil content in WPI. Moreover, HA increased the emulsion viscosity and strength of the interfacial network structure. Micrographs obtained using confocal laser scanning microscopy indicated that the emulsion with 0.8 % (w/v) HA exhibited good dispersion and homogeneity after storage for 14 d. Complexation with HA significantly altered the rheological and emulsifying properties of WPI, providing an emulsion with excellent stability under heating treatment, freeze-thawing treatment and centrifugation. The results provide a potential for HA application in emulsified foods.

Colloidal Polyelectrolyte Complexes from Hyaluronic Acid: Preparation and Biomedical Applications

Hyaluronic acid (HA) is a naturally occurring polysaccharide which has been extensively exploited in biomedical fields owing to its outstanding biocompatibility. Self-assembly of HA and polycations through electrostatic interactions can generate colloidal polyelectrolyte complexes (PECs), which can offer a wide range of applications while being relatively simple to prepare with rapid and "green" processes. The advantages of colloidal HA-based PECs stem from the combined benefits of nanomedicine, green chemistry, and the inherent properties of HA, namely high biocompatibility, biodegradability, and biological targeting capability. Accordingly, colloidal PECs from HA have received increasing attention in the recent years as high-performance materials for biomedical applications. Considering their potential, this review is aimed to provide a comprehensive understanding of colloidal PECs from HA in complex with polycations, from the most fundamental aspects of the preparation process to their various biomedical applications, notably as nanocarriers for delivering small molecule drugs, nucleic acids, peptides, proteins, and bioimaging agents or the construction of multifunctional platforms.