Graphene oxide enriched with oxygen-containing groups: on the way to an increase of antioxidant activity and biocompatibility

Carbon Dioxide Capture on Oxygen- and Nitrogen-Containing Carbon Quantum Dots

To address global climate change challenges, an effective strategy involves capturing CO2 directly at its source using a sustainable, low-cost adsorbent. Carbon quantum dots (CQDs), derived from lignin, are employed to modify the internal surface of an activated carbon adsorbent, enabling selective adsorption based on electrostatic interactions. By manipulating charge distribution on CQDs through either doping (nitrogen) or functionalization (amine, carboxyl, or hydroxyl groups), the study confirms, through classical molecular dynamics simulations, the potential to adjust binding strength, adsorption capacity, and selectivity for CO2 over N2 and O2. For simulations with a single component gas, maximum selectivities of 3.6 and 6.7 are shown for CO2/N2 and CO2/O2, respectively, at 300 K. Simulations containing a wet flue gas indicate that the presence of water increases the CO2/N2 and CO2/O2 selectivities. The highest CO2/H2O selectivity obtained from a CQD/graphite system is 4.3. A comparison of graphite and lignin-based carbon composite (LBCC) substrates demonstrated that LBCC has enhanced adsorptive capacity. The roughness of the LBCC substrate prevents the diffusion of the CQD on the surface. This computational study takes another step toward identifying optimal CQD atomic architecture, dimensions, doping, and functionalization for a large-scale CQD/AC adsorbent solution for CO2 capture.

Development of Graphene-Based Materials with the Targeted Action for Cancer Theranostics

The review summarises the prospects in the application of graphene and graphene-based nanomaterials (GBNs) in nanomedicine, including drug delivery, photothermal and photodynamic therapy, and theranostics in cancer treatment. The application of GBNs in various areas of science and medicine is due to the unique properties of graphene allowing the development of novel ground-breaking biomedical applications. The review describes current approaches to the production of new targeting graphene-based biomedical agents for the chemotherapy, photothermal therapy, and photodynamic therapy of tumors. Analysis of publications and FDA databases showed that despite numerous clinical studies of graphene-based materials conducted worldwide, there is a lack of information on the clinical trials on the use of graphene-based conjugates for the targeted drug delivery and diagnostics. The review will be helpful for researchers working in development of carbon nanostructures, material science, medicinal chemistry, and nanobiomedicine.

Graphene-silymarin-loaded chitosan/gelatin/hyaluronic acid hybrid constructs for advanced full-thickness burn wound management

Burn wounds (BWs) with extensive blood loss, along with bacterial infections and poor healing, may become detrimental and pose significant rehabilitation obstacles in medical facilities. Therefore, the freeze-drying method synthesized novel hemocompatible chitosan, gelatin, and hyaluronic acid infused with graphene oxide-silymarin (CGH-SGO) hybrid constructs for application as a BW patch. Most significantly, synthesized hybrid constructs exhibited an interconnected-porous framework with precise pore sizes (≈118.52 µm) conducive to biological functions. Furthermore, the FTIR and XRD analyses document the constructs' physiochemical interactions. Similarly, enhanced swelling ratios, adequate WVTR (736 ± 78 g m-2 hr-1), and bio-degradation rates were seen during the physiological examination of constructs. Following the in vitro investigations, SMN-GO added to constructs improved their anti-bacterial (against E.coli and S. aureus), anti-oxidant, hemocompatible, and bio-compatible characteristics in conjunction with prolonged drug release. Furthermore, in vivo, implanting constructs on wounds exhibited significant acceleration in full-thickness burn wound (FT-BW) healing on the 14th day (CGH-SGO: 95 ± 2.1 %) in contrast with the control (Gauze: 71 ± 4.2 %). Additionally, contrary to gauze, the in vivo rat tail excision model administered with constructs assured immediate blood clotting. Therefore, CGH-SGO constructs with an improved porous framework, anti-bacterial activity, hemocompatibility, and biocompatibility could represent an attractive option for healing FT-BWs.

Application of carbon nanostructures in biomedicine: realities, difficulties, prospects

The review systematizes data on the wide possibilities of practical application of carbon nanostructures. Much attention is paid to the use of carbon nanomaterials in medicine for the visualization of tumors during surgical interventions, in the creation of cosmetics, as well as in agriculture in the creation of fertilizers. Additionally, we demonstrate trends in research in the field of carbon nanomaterials with a view to elaborating targeted drug delivery systems. We also show the creation of nanosized medicinal substances and diagnostic systems, and the production of new biomaterials. A separate section is devoted to the difficulties in studying carbon nanomaterials. The review is intended for a wide range of readers, as well as for experts in the field of nanotechnology and nanomedicine.

Ultrahigh-Efficacy VEGF Neutralization Using Carbonized Nanodonuts: Implications for Intraocular Anti-Angiogenic Therapy

Ocular angiogenesis, associated with diseases such as retinopathy of prematurity and diabetic retinopathy, is a leading cause of irreversible vision loss. Herein, carbon nanodonuts (CNDs) with a donut-shaped structure are synthesized using sodium alginate (SA) and 1,8-diaminooctane (DAO) through a one-step thermal process. The formation of SA/DAO-CNDs occurs through a crosslinking reaction between SA and DAO, creating amide bonds followed by partial carbonization. In human retinal pigment epithelial cells exposed to H2 O2 or lipopolysaccharide, the SA/DAO-CNDs display a more than fivefold reduction in reactive oxygen species and proinflammatory cytokines, such as IL-6 and IL-1β, when compared to carbonized nanomaterials produced exclusively from SA. Furthermore, the CNDs effectively inhibit vascular endothelial growth factor A-165 (VEGF-A165 )-induced cell migration and tube formation in human umbilical vein endothelial cells due to their strong affinity for VEGF-A165 , with a dissociation constant of 2.2 × 10-14  M, over 1600 times stronger than the commercial drug bevacizumab (Avastin). Trypsin digestion coupled with LC-MS/MS analysis reveals that VEGF-A165 interacts with SA/DAO-CNDs through its heparin-binding domain, leading to activity loss. The SA/DAO-CNDs demonstrate excellent biocompatibility and potent anti-angiogenic effects in chicken embryos and rabbit eyes. These findings suggest that SA/DAO-CNDs hold promise as a therapeutic agent for treating various angiogenesis-related ocular diseases.

A novel digitonin/graphene oxide/iron oxide nanocomposite: synthesis, physiochemical characterization and antioxidant activity

In this work, iron oxide (Fe3O4) magnetic nanoparticles (MNPs) and graphene oxide (GO) nanosheets were prepared via the co-precipitation technique and the Modified Hummer method. Fe3O4 MNPs and GO nanosheets were combined to prepare Fe3O4/GO nanocomposite and subsequently conjugated with Digitonin (DIG) in order to obtain a dual-targeted delivery system based on DIG/Fe3O4/GO nanocomposite. SEM images reveal the presence of Fe3O4 MNPs at a scale of 100 nm, exhibiting dispersion between the GO nanosheets. Aggregation of the DIG/Fe3O4/GO nanocomposite was observed at various size scales. The XRD structural analysis confirms the crystal structure of the prepared samples. The Fe3O4 MNPs demonstrated the main XRD-diffracted peaks. Also, GO nanosheets exhibit crystalline characteristics on the (001) and (002) planes. The predominant peaks observed in the DIG/GO/Fe3O4 nanocomposite are attributed to the crystal phases of Fe3O4 MNPs. The FT-IR vibrational modes observed in the GO/DIG/Fe3O4 nanocomposite indicate the presence of crosslinking between GO nanosheet layers and the Fe3O4 MNPs. The antioxidant activity of the prepared samples was measured and the DIG/GO/Fe3O4 nanocomposite demonstrated a significantly high antioxidant activity in both 2-diphenyl-1-picrylhydrazyl (DPPH·) and 2,2-azino-bis-3-ethylbenzthiazoline-6-sulfonic acid (ABTS·+) tests.

Graphene-Based Engineered Living Materials

With the rise of engineered living materials (ELMs) as innovative, sustainable and smart systems for diverse engineering and biological applications, global interest in advancing ELMs is on the rise. Graphene-based nanostructures can serve as effective tools to fabricate ELMs. By using graphene-based materials as building units and microorganisms as the designers of the end materials, next-generation ELMs can be engineered with the structural properties of graphene-based materials and the inherent properties of the microorganisms. However, some challenges need to be addressed to fully take advantage of graphene-based nanostructures for the design of next-generation ELMs. This work covers the latest advances in the fabrication and application of graphene-based ELMs. Fabrication strategies of graphene-based ELMs are first categorized, followed by a systematic investigation of the advantages and disadvantages within each category. Next, the potential applications of graphene-based ELMs are covered. Moreover, the challenges associated with fabrication of next-generation graphene-based ELMs are identified and discussed. Based on a comprehensive overview of the literature, the primary challenge limiting the integration of graphene-based nanostructures in ELMs is nanotoxicity arising from synthetic and structural parameters. Finally, we present possible design principles to potentially address these challenges.

Graphene in nanomedicine: A review on nano-bio factors and antibacterial activity

Graphene-based nanomaterials possess potent antibacterial activity and have engrossed immense interest among researchers as an active armour against pathogenic microbes. A comprehensive perception of the antibacterial activity of these nanomaterials is critical to the fabrication of highly effective antimicrobial nanomaterials, which results in highly efficient and enhanced activity. These materials owing to their antimicrobial activity are utilized as nanomedicine against various pathogenic microbes. The present article reviews the antimicrobial activity of graphene and its analogs such as graphene oxide, reduced graphene oxide as well as metal, metal oxide and polymeric composites. The review draws emphasis on the effect of various nano-bio factors on the antibacterial capability. It also provides an insight into the antibacterial properties of these materials along with a brief discussion on the discrepancies in their activities as evidenced by the scientific communities. In this way, the review is expected to shed light on future research and development in graphene-based nanomedicine.

Revolutionizing Drug Delivery and Therapeutics: The Biomedical Applications of Conductive Polymers and Composites-Based Systems

The first conductive polymers (CPs) were developed during the 1970s as a unique class of organic substances with properties that are electrically and optically comparable to those of inorganic semiconductors and metals while also exhibiting the desirable traits of conventional polymers. CPs have become a subject of intensive research due to their exceptional qualities, such as high mechanical and optical properties, tunable electrical characteristics, ease of synthesis and fabrication, and higher environmental stability than traditional inorganic materials. Although conducting polymers have several limitations in their pure state, coupling with other materials helps overcome these drawbacks. Owing to the fact that various types of tissues are responsive to stimuli and electrical fields has made these smart biomaterials attractive for a range of medical and biological applications. For various applications, including the delivery of drugs, biosensors, biomedical implants, and tissue engineering, electrical CPs and composites have attracted significant interest in both research and industry. These bimodalities can be programmed to respond to both internal and external stimuli. Additionally, these smart biomaterials have the ability to deliver drugs in various concentrations and at an extensive range. This review briefly discusses the commonly used CPs, composites, and their synthesis processes. Further highlights the importance of these materials in drug delivery along with their applicability in various delivery systems.

Radiosensitization of Nasopharyngeal Carcinoma by Graphene Oxide Nanosheets to Reduce Bcl-2 Level

There are many treatments for nasopharyngeal carcinoma (NPC), but none of them are very effective. Radiotherapy is used extensively in NPC treatment, but radioresistance is a major problem. Graphene oxide (GO) has been previously studied in cancer treatment, and this study is aimed to explore its role in radiosensitization of NPC. Therefore, graphene oxide nanosheets were prepared, and the relationship between GO and radioresistance was explored. The GO nanosheets were synthesized by a modified Hummers' method. The morphologies of the GO nanosheets were characterized by field-emission environmental scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The morphological changes and radiosensitivity of C666-1 and HK-1 cells with or without the GO nanosheets were observed by an inverted fluorescence microscopy and laser scanning confocal microscopy (LSCM). Colony formation assay and Western Blot were applied for analysis of NPC radiosensitivity. The as-synthesized GO nanosheets have lateral dimensions (sizes ∼1 μm) and exhibit a thin wrinkled two-dimensional lamellar structure with slight folds and crimped edges (thickness values ∼1 nm). C666-1 cells with the GO was significantly changed the morphology of cells postirradiation. The full field of view visualized by a microscope showed the shadow of dead cells or cell debris. The synthesized graphene oxide nanosheets inhibited cell proliferation, promoted cell apoptosis, and inhibited the expression of Bcl-2 in C666-1 and HK-1 cells but increased the level of Bax. The GO nanosheets could affect the cell apoptosis and reduce the pro-survival protein Bcl-2 related to the intrinsic mitochondrial pathway. The GO nanosheets could enhance radiosensitivity, which might be a radioactive material in NPC cells.

Packaging Materials Based on Styrene-Isoprene-Styrene Triblock Copolymer Modified with Graphene

This study presents the improved stabilization effects of graphene on a polymer substrate, namely a styrene-isoprene-styrene triblock copolymer (SIS) which creates opportunities for long-term applications and radiation processing. The added graphene has a remarkable activity on the protection of polymer against their oxidation due to the penetration of free macroradical fragments into the free interlayer space. The chemiluminescence procedure used for the evaluation of the progress of oxidation reveals the delaying effect of oxidative degradation by the doubling extension of oxidation induction time, when the material formulation containing graphene is oxidized at 130 °C. The pristine polymer that is thermally aged requires an activation energy of 142 kJ mol^-1, while the modified material needs 148, 158 and 169 kJ mol^-1, for the oxidative degradation in the presence of 1, 2 and, respectively, 3 wt% of graphene. The contribution of graphene content (1 wt%) on the stability improvement of SIS is demonstrated by the increase of onset oxidation temperature from 190 °C for neat polymer to 196 °C in the presence of graphene and to 205 °C for the polymer stabilized with graphene and rosemary extract. The addition of graphene into the polymer formulations is a successful method for enlarging durability instead of the modification of receipt with synthesis antioxidants. The presumable applications of these studied materials cover the areas of medical wear, food packaging, commodities, sealing gaskets and others that may also be included through the products for nuclear power plants.

Membranes prepared from graphene-based nanomaterials for water purification: a mini-review

Graphene-based nanomaterials (GBnMs) are currently regarded as a critical building block for the fabrication of membranes for water purification due to their advantageous properties such as easy surface modification of functional groups, adjustable interlayer pore channels for solvent transportation, robust mechanical properties, and superior photothermal capabilities. By combining graphene derivatives with other emerging materials, heteroatom doping and rational design of a three-dimensional network can enhance water transportation and evaporation rates through channels of GBnM laminates and such layered structures have been applied in various water purification technologies. Herein, this mini-review summarizes recent progress in the synthesis of GBnMs and their applications in water treatment technologies, specifically, nanofiltration (NF) and solar desalination (SD). Finally, personal perspectives on the challenges and future directions of this promising nanomaterial are also provided.

Molecular Characteristics and Antioxidant Activity of Spruce (Picea abies) Hemicelluloses Isolated by Catalytic Oxidative Delignification

Spruce (Piceaabies) wood hemicelluloses have been obtained by the noncatalytic and catalytic oxidative delignification in the acetic acid-water-hydrogen peroxide medium in a processing time of 3–4 h and temperatures of 90–100 °C. In the catalytic process, the H₂SO₄, MnSO₄, TiO₂, and (NH₄)₆Mo₇O₂₄ catalysts have been used. A polysaccharide yield of up to 11.7 wt% has been found. The hemicellulose composition and structure have been studied by a complex of physicochemical methods, including gas and gel permeation chromatography, Fourier-transform infrared spectroscopy, and thermogravimetric analysis. The galactose:mannose:glucose:arabinose:xylose monomeric units in a ratio of 5:3:2:1:1 have been identified in the hemicelluloses by gas chromatography. Using gel permeation chromatography, the weight average molar mass M_w of hemicelluloses has been found to attain 47,654 g/mol in noncatalytic delignification and up to 42,793 g/mol in catalytic delignification. Based on the same technique, a method for determining the α and k parameters of the Mark–Kuhn–Houwink equation for hemicelluloses has been developed; it has been established that these parameters change between 0.33–1.01 and 1.57–472.17, respectively, depending on the catalyst concentration and process temperature and time. Moreover, the FTIR spectra of the hemicellulose samples contain all the bands characteristic of heteropolysaccharides, specifically, 1069 cm⁻¹ (C–O–C and C–O–H), 1738 cm⁻¹ (ester C=O), 1375 cm⁻¹ (–C–CH₃), 1243 cm⁻¹ (–C–O–), etc. It has been determined by the thermogravimetric analysis that the hemicelluloses isolated from spruce wood are resistant to heating to temperatures of up to ~100 °C and, upon further heating, start destructing at an increasing rate. The antioxidant activity of the hemicelluloses has been examined using the compounds simulating the 2,2-diphenyl-2-picrylhydrazyl free radicals.