Harnessing glycosylation to improve cellulase activity

Cloning and expression of Neurospora crassa cellobiohydrolase II in Pichia pastoris

A major cellobiohydrolase of Neurospora crassa CBH2 was successfully expressed in Pichia pastoris. The maximum Avicelase activity in shake flask among seven transformants which selected on 4.0 g/L G418 plates was 0.61 U/mL. The optimal pH and temperature for Avicelase activity of the recombinant CBH2 were determined to be 4.8 and 60 °C, respectively. The new CBH2 maintained 63.5 % Avicelase activity in the range of pH 4.0-10.4, and 60.2 % Avicelase activity in the range of 30-90 °C. After incubation at 70-90 °C for 1 h, the Avicelase activity retained 60.5 % of its initial activity. The presence of Zn2+, Ca2+ or Cd2+ enhanced the Avicelase activity of the CBH2, of which Cd2+ at 10 mM causing the highest increase. The recombinant CBH2 was used to enhance the Avicel hydrolysis by improving the exo-exo-synergism between CBH2 and CBH1 in N.crassa cellulase. The enzymatic hydrolysis yield was increased by 38.1 % by adding recombinant CBH2 and CBH1, and the yield was increased by 215.4 % when the temperature is raised to 70 °C. This work provided a CBH2 with broader pH range and better heat resistance, which is a potential enzyme candidate in food, textile, pulp and paper industries, and other industrial fields.

Current perspective in research and industrial applications of microbial cellulases

The natural interactions between various bacteria, fungi, and other cellulolytic microorganisms destroy lignocellulosic polymers. The efficacy of this process is determined by the combined action of three main enzymes: endoglucanases, exo-glucanases, and β-glucosidase. The enzyme attacks the polymeric structure's β-1,4-linkages during the cellulose breakdown reaction. This mechanism is crucial for the environment as it recycles cellulose in the biosphere. However, there are problems with enzymatic cellulose breakdown, including complex cellulase structure, insufficient degradation efficacy, high production costs, and post-translational alterations, many of which are closely related to certain unidentified cellulase properties. These issues impede the practical use of cellulases. A developing area of research is the application of this similar paradigm for industrial objectives. Cellulase enzyme exhibits greater promise in many critical industries, including biofuel manufacture, textile smoothing and finishing, paper and pulp manufacturing, and farming. However, the study on cellulolytic enzymes must move forward in various directions, including increasing the activity of cellulase as well as designing peptides to give biocatalysts their desired attributes. This manuscript includes an overview of current research on different sources of cellulases, their production, and biochemical characterization.

Glycosylation of cellulase: a novel strategy for improving cellulase

Protein glycosylation is the most complex posttranslational modification process. Most cellulases from filamentous fungi contain N-glycosylation and O-glycosylation. Here, we discuss the potential roles of glycosylation on the characteristics and function of cellulases. The use of certain cultivation, inducer, and alteration of engineering glycosylation pathway can enable the rational control of cellulase glycosylation. Glycosylation does not occur arbitrarily and may tend to modify the 3D structure of cellulases by using specially distributed glycans. Therefore, glycoengineering should be considered comprehensively along with the spatial structure of cellulases. Cellulase glycosylation may be an evolution phenomenon, which has been considered as an economical way for providing different functions from identical proteins. In addition to gene and transcription regulations, glycosylation may be another regulation on the protein expression level. Enhanced understanding of the potential regulatory role of cellulase glycosylation will enable synthetic biology approaches for the development of commercial cellulase.

Cloning and functional characterization of the oxidative squalene cyclase gene in the deep-sea holothurian Chiridota sp

Saponins derived from holothurians have high potential medicinal value. However, the de novo synthesis of the derivatization of triterpenes is still unclear. Oxidative squalene cyclase (OSC) can catalyze 2,3-Oxidosqualene into diverse products that serve as important precursors for triterpene synthesis. However, the function of theOSCgene in Chiridotasp. hasnot been elucidated. In this study, an OSCgenederived from the deep-sea holothurianChiridota sp. was cloned and characterized functionally in a yeast system. The open reading frame of the OSC gene was 2086 bp, which encoded 695 amino acids. The Chiridota sp. OSC gene has a similarity of 66.89 % to the OSC of other holothurian species and 63.51 % to that of Acanthaster planci. The phylogenetic tree showed that the echinozoan OSCsclustered together, and then they formeda sister group to fungi and plant homologs. Chiridota sp. OSC catalyzed 2,3-Oxidosqualene into parkeol.Under high pressure, the relative enzymatic activity and stability of cyclase inChiridota sp. was higher than that in the shallow-sea holothurianStichopus horrens. The newly cloned OSC of Chiridota sp.provideskey information for the interpretation of the saponin synthesis pathway in deep-sea holothurians.

Whole-genome sequencing and comparative genomic analysis of potential biotechnological strains of Trichoderma harzianum, Trichoderma atroviride, and Trichoderma reesei

Trichoderma atroviride and Trichoderma harzianum are widely used as commercial biocontrol agents against plant diseases. Recently, T. harzianum IOC-3844 (Th3844) and T. harzianum CBMAI-0179 (Th0179) demonstrated great potential in the enzymatic conversion of lignocellulose into fermentable sugars. Herein, we performed whole-genome sequencing and assembly of the Th3844 and Th0179 strains. To assess the genetic diversity within the genus Trichoderma, the results of both strains were compared with strains of T. atroviride CBMAI-00020 (Ta0020) and T. reesei CBMAI-0711 (Tr0711). The sequencing coverage value of all genomes evaluated in this study was higher than that of previously reported genomes for the same species of Trichoderma. The resulting assembly revealed total lengths of 40 Mb (Th3844), 39 Mb (Th0179), 36 Mb (Ta0020), and 32 Mb (Tr0711). A genome-wide phylogenetic analysis provided details on the relationships of the newly sequenced species with other Trichoderma species. Structural variants revealed genomic rearrangements among Th3844, Th0179, Ta0020, and Tr0711 relative to the T. reesei QM6a reference genome and showed the functional effects of such variants. In conclusion, the findings presented herein allow the visualization of genetic diversity in the evaluated strains and offer opportunities to explore such fungal genomes in future biotechnological and industrial applications.

Insights into the effect of protein glycosylation on carbohydrate substrate binding

The role of glycosylation in the binding of glycoproteins to carbohydrate substrates has not been well understood. The present study addresses this knowledge gap by elucidating the links between the glycosylation patterns of a model glycoprotein, a Family 1 carbohydrate-binding module (TrCBM1), and the thermodynamic and structural properties of its binding to different carbohydrate substrates using isothermal titration calorimetry and computational simulation. The variations in glycosylation patterns cause a gradual transition of the binding to soluble cellohexaose from an entropy-driven process to an enthalpy-driven one, a trend closely correlated with the glycan-induced shift of the predominant binding force from hydrophobic interactions to hydrogen bonding. However, when binding to a large surface of solid cellulose, glycans on TrCBM1 have a more dispersed distribution and thus have less adverse impact on the hydrophobic interaction forces, leading to overall improved binding. Unexpectedly, our simulation results also suggest an evolutionary role of O-mannosylation in transforming the substrate binding features of TrCBM1 from those of type A CBMs to those of type B CBMs. Taken together, these findings provide new fundamental insights into the molecular basis of the role of glycosylation in protein-carbohydrate interactions and are expected to better facilitate further studies in this area.

Complete genome sequencing and investigation on the fiber-degrading potential of Bacillus amyloliquefaciens strain TL106 from the tibetan pig

Background

Cellulolytic microorganisms are considered a key player in the degradation of feed fiber. These microorganisms can be isolated from various resources, such as animal gut, plant surfaces, soil and oceans. A new strain of Bacillus amyloliquefaciens, TL106, was isolated from faeces of a healthy Tibetan pigs. This strain can produce cellulase and shows strong antimicrobial activity in mice. Thus, in this study, to better understand the strain of B. amyloliquefaciens TL106 on degradation of cellulose, the genome of the strain TL106 was completely sequenced and analyzed. In addition, we also explored the cellulose degradation ability of strain TL106 in vitro.

Results

TL106 was completely sequenced with the third generation high-throughput DNA sequencing. In vitro analysis with enzymatic hydrolysis identified the activity of cellulose degradation. TL106 consisted of one circular chromosome with 3,980,960 bp and one plasmid with 16,916 bp, the genome total length was 3.99 Mb and total of 4,130 genes were predicted. Several genes of cellulases and hemicellulase were blasted in Genbank, including β-glucosidase, endoglucanase, ß-glucanase and xylanase genes. Additionally, the activities of amylase (20.25 U/mL), cellulase (20.86 U/mL), xylanase (39.71 U/mL) and β-glucanase (36.13 U/mL) in the fermentation supernatant of strain TL106 were higher. In the study of degradation characteristics, we found that strain TL106 had a better degradation effect on crude fiber, neutral detergent fiber, acid detergent fiber, starch, arabinoxylan and β-glucan of wheat and highland barley .

Conclusions

The genome of B. amyloliquefaciens TL106 contained several genes of cellulases and hemicellulases, can produce carbohydrate-active enzymes, amylase, cellulase, xylanase and β-glucanase. The supernatant of fermented had activities of strain TL106. It could degrade the fiber fraction and non-starch polysaccharides (arabinoxylans and β-glucan) of wheat and highland barley. The present study demonstrated that the degradation activity of TL106 to crude fiber which can potentially be applied as a feed additive to potentiate the digestion of plant feed by monogastric animals.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12866-022-02599-7.

Analysis of fungal high-mannose structures using CAZymes

Glycoengineering ultimately allows control over glycosylation patterns to generate new glycoprotein variants with desired properties. A common challenge is glycan heterogeneity, which may affect protein function and limit the use of key techniques such as mass spectrometry. Moreover, heterologous protein expression can introduce nonnative glycan chains that may not fulfill the requirement for therapeutic proteins. One strategy to address these challenges is partial trimming or complete removal of glycan chains, which can be obtained through selective application of exoglycosidases. Here, we demonstrate an enzymatic O-deglycosylation toolbox of a GH92 α-1,2-mannosidase from Neobacillus novalis, a GH2 β-galactofuranosidase from Amesia atrobrunnea and the jack bean α-mannosidase. The extent of enzymatic O-deglycosylation was mapped against a full glycosyl linkage analysis of the O-glycosylated linker of cellobiohydrolase I from Trichoderma reesei (TrCel7A). Furthermore, the influence of deglycosylation on TrCel7A functionality was evaluated by kinetic characterization of native and O-deglycosylated forms of TrCel7A. This study expands structural knowledge on fungal O-glycosylation and presents a ready-to-use enzymatic approach for controlled O-glycan engineering in glycoproteins expressed in filamentous fungi.

A novel accessory protein ArCel5 from cellulose-gelatinizing fungus Arthrobotrys sp. CX1

Improved understanding of cellulose swelling mechanism is beneficial for increasing the hydrolysis efficiency of cellulosic substrates. Here, we report a family 5 glycoside hydrolase ArCel5 isolated from the cellulose-gelatinizing fungus Arthrobotrys sp. CX1. ArCel5 exhibited low specific hydrolysis activity and high cellulose swelling capability, which suggested that this protein might function as an accessory protein. Homology modeling glycosylation detection revealed that ArCel5 is a multi-domain protein including a family 1 carbohydrate-binding module, a glycosylation linker, and a catalytic domain. The adsorption capacity, structural changes and hydrature index of filter paper treated by different ArCel5 mutants demonstrated that CBM1 and linker played an essential role in recognizing, binding and decrystallizing cellulosic substrates, which further encouraged the synergistic action between ArCel5 and cellulases. Notably, glycosylation modification further strengthened the function of the linker region. Overall, our study provides insight into the cellulose decrystallization mechanism by a novel accessory protein ArCel5 that will benefit future applications.

The Linker Region Promotes Activity and Binding Efficiency of Modular LPMO towards Polymeric Substrate

Lytic polysaccharide monooxygenases (LPMOs) mediate oxidative degradation of plant polysaccharides. The genes encoding LPMOs are most commonly arranged with one catalytic domain, while a few are found tethered to additional noncatalytic units, i.e., cellulase linker and carbohydrate-binding module (CBM). The presence of CBM is known to facilitate catalysis by directing the enzymes toward cellulosic polymer, while the role of linkers is poorly understood. Based on limited experimental evidence, linkers are believed to serve merely as flexible spacers between the structured domains. Thus, this study aims to unravel the role of the linker regions present in LPMO sequences. For this, we analyzed the genome of Botrytis cinerea and found 9 genes encoding cellulose lytic monooxygenases (AA9 family), of which BcAA9C was overexpressed in cellulose-inducible conditions. We designed variants of flLPMO (full-length enzyme) with truncation of either linker or CBM to examine the role of linker in activity, binding, and thermal stability of the associated monooxygenase. Biochemical assays predicted that the deletion of linker does not impact the potential of flLPMO for catalyzing the oxidation of Amplex Red, but that it does have a major influence on the capability of flLPMO to degrade recalcitrant polysaccharide substrate. Langmuir isotherm and SEM analysis demonstrated that linker domain aids in polysaccharide binding during flLPMO-mediated deconstruction of plant cell wall. Interestingly, linker domain was also found to contribute toward the thermostability of flLPMO. Overall, our study reveals that linker is not merely a spacer, but plays a key role in LPMO-mediated biomass fibrillation; these findings are broadly applicable to other polysaccharide-degrading enzymes. IMPORTANCE The polysaccharide-disintegrating carbohydrate-active enzymes (CAZymes) are often found with multimodular architecture, where the catalytic domain is connected to an accessory CBM domain with the help of a flexible linker region. So far, the linker has been understood merely as a flexible spacer between the two domains. Therefore, the current study is designed to determine the role of linker in polysaccharide fibrillation. To conceive this study, we have selected LPMO as a model enzyme, as it is not only an industrially relevant enzyme but it also harbors a catalytic domain, linker region, and CBM domain. The present study highlighted the crucial and indispensable role of the linker region in mediating polysaccharide disintegration. Considering its role in binding, thermostability, and activity toward polysaccharide substrate, we propose linker as a potential candidate for future CAZyme engineering.

Glycosylation-on-a-Chip: A Flow-Based Microfluidic System for Cell-Free Glycoprotein Biosynthesis

In recent years, cell-free synthetic glycobiology technologies have emerged that enable production and remodeling of glycoproteins outside the confines of the cell. However, many of these systems combine multiple synthesis steps into one pot where there can be competing reactions and side products that ultimately lead to low yield of the desired product. In this work, we describe a microfluidic platform that integrates cell-free protein synthesis, glycosylation, and purification of a model glycoprotein in separate compartments where each step can be individually optimized. Microfluidics offer advantages such as reaction compartmentalization, tunable residence time, the ability to tether enzymes for reuse, and the potential for continuous manufacturing. Moreover, it affords an opportunity for spatiotemporal control of glycosylation reactions that is difficult to achieve with existing cell-based and cell-free glycosylation systems. In this work, we demonstrate a flow-based glycoprotein synthesis system that promotes enhanced cell-free protein synthesis, efficient protein glycosylation with an immobilized oligosaccharyltransferase, and enrichment of the protein product from cell-free lysate. Overall, this work represents a first-in-kind glycosylation-on-a-chip prototype that could find use as a laboratory tool for mechanistic dissection of the protein glycosylation process as well as a biomanufacturing platform for small batch, decentralized glycoprotein production.

Fungal cellulases: protein engineering and post-translational modifications

Enzymatic degradation of lignocelluloses into fermentable sugars to produce biofuels and other biomaterials is critical for environmentally sustainable development and energy resource supply. However, there are problems in enzymatic cellulose hydrolysis, such as the complex cellulase composition, low degradation efficiency, high production cost, and post-translational modifications (PTMs), all of which are closely related to specific characteristics of cellulases that remain unclear. These problems hinder the practical application of cellulases. Due to the rapid development of computer technology in recent years, computer-aided protein engineering is being widely used, which also brings new opportunities for the development of cellulases. Especially in recent years, a large number of studies have reported on the application of computer-aided protein engineering in the development of cellulases; however, these articles have not been systematically reviewed. This article focused on the aspect of protein engineering and PTMs of fungal cellulases. In this manuscript, the latest literatures and the distribution of potential sites of cellulases for engineering have been systematically summarized, which provide reference for further improvement of cellulase properties. KEY POINTS: •Rational design based on virtual mutagenesis can improve cellulase properties. •Modifying protein side chains and glycans helps obtain superior cellulases. •N-terminal glutamine-pyroglutamate conversion stabilizes fungal cellulases.

Shotgun scanning glycomutagenesis: A simple and efficient strategy for constructing and characterizing neoglycoproteins

Asparagine-linked (N-linked) protein glycosylation—the covalent attachment of complex sugars to the nitrogen atom in asparagine side chains—is the most widespread posttranslational modification to proteins and also the most complex. N-glycosylation affects a significant number of cellular proteins and can have profound effects on their most important attributes such as biological activity, chemical solubility, folding and stability, immunogenicity, and serum half-life. Accordingly, the strategic installation of glycans at naïve sites has become an attractive means for endowing proteins with advantageous biological and/or biophysical properties. Here, we describe a glycoprotein engineering strategy that enables systematic investigation of the structural and functional consequences of glycan installation at every position along a protein backbone and provides a new route to bespoke glycoproteins.

As a common protein modification, asparagine-linked (N-linked) glycosylation has the capacity to greatly influence the biological and biophysical properties of proteins. However, the routine use of glycosylation as a strategy for engineering proteins with advantageous properties is limited by our inability to construct and screen large collections of glycoproteins for cataloguing the consequences of glycan installation. To address this challenge, we describe a combinatorial strategy termed shotgun scanning glycomutagenesis in which DNA libraries encoding all possible glycosylation site variants of a given protein are constructed and subsequently expressed in glycosylation-competent bacteria, thereby enabling rapid determination of glycosylatable sites in the protein. The resulting neoglycoproteins can be readily subjected to available high-throughput assays, making it possible to systematically investigate the structural and functional consequences of glycan conjugation along a protein backbone. The utility of this approach was demonstrated with three different acceptor proteins, namely bacterial immunity protein Im7, bovine pancreatic ribonuclease A, and human anti-HER2 single-chain Fv antibody, all of which were found to tolerate N-glycan attachment at a large number of positions and with relatively high efficiency. The stability and activity of many glycovariants was measurably altered by N-linked glycans in a manner that critically depended on the precise location of the modification. Structural models suggested that affinity was improved by creating novel interfacial contacts with a glycan at the periphery of a protein–protein interface. Importantly, we anticipate that our glycomutagenesis workflow should provide access to unexplored regions of glycoprotein structural space and to custom-made neoglycoproteins with desirable properties.

Investigating thermal stability based on the structural changes of lactase enzyme by several orthogonal methods

Thermal stability of lactase (β-galactosidase) enzyme has been studied by a variety of physico-chemical methods. β-galactosidase is the main active ingredient of medications for lactose intolerance. It is typically produced industrially by the Aspergillus oryzae filamentous fungus. Lactase was used as a model to help understand thermal stability of enzyme-type biopharmaceuticals. Enzyme activity (hydrolyzation of lactose) of β-galactosidase was determined after storing the solid enzyme substance at various temperatures. For a better understanding of the relationship between structure and activity changes we determined the mass and size of the molecules with gel electrophoresis and dynamic light scattering and detected aggregation processes. A bottom-up proteomic procedure was used to determine the primary amino acid sequence and to investigate changes in the N-glycosylation pattern of the protein. NMR and CD spectroscopic methods were used to observe changes in higher order structures and to reveal relationships between structural and functional changes.

Biochemical properties of a native β-1,4-mannanase from Aspergillus aculeatus QH1 and partial characterization of its N-glycosylation

N-glycosylation plays critical roles in protein secretion, sorting, stability, activity modulation, and interactions to other molecules in the eukaryotic organisms. Fungal β-1,4-mannanases have been widely used in the agri-food industry and contribute to the pathogenesis on plants. However, the information on N-glycosylation of a specific fungal carbohydrate-active enzyme (CAZyme) is currently limited. Herein, a cDNA was cloned from Aspergillus aculeatus QH1, displaying a full length of 1302 bp with an open reading frame of 1134 bp encoding for a GH5 subfamily 7 β-1, 4-mannanase, namely AacMan5_7A. The enzyme was purified and exhibited an optimal activity at pH 4.6 and 60 °C, hydrolyzing glucomannan and galactomannan, but not yeast mannan. AacMan5_7A is an N-glycosylated protein decorated with a high-mannose type glycan. Further through UPLC-ESI-MS/MS analysis, one of the four predicted N-glycosylation sites at N255 position was experimentally verified. The present study expands the information of N-glycosylation in fungal CAZymes, providing scientific bases for enhancing the production of fungal enzymes and their applications in food, feed, and plant biomass conversions.

•

A cDNA was cloned from Aspergillus aculeatus QH1 for a GH5 subfamily 7 β-1, 4-mannanase, namely AacMan5_7A.

•

AacMan5_7A was characterized for its general enzyme properties.

•

AacMan5_7A is an N-glycosylated protein decorated with a high-mannose type glycan.

•

One of the four predicted N-glycosylation sites at N255 position was experimentally verified.

Carbohydrate-binding module O-mannosylation alters binding selectivity to cellulose and lignin

Improved understanding of the effect of protein glycosylation is expected to provide the foundation for the design of protein glycoengineering strategies. In this study, we examine the impact of O-glycosylation on the binding selectivity of a model Family 1 carbohydrate-binding module (CBM), which has been shown to be one of the primary sub-domains responsible for non-productive lignin binding in multi-modular cellulases. Specifically, we examine the relationship between glycan structure and the binding specificity of the CBM to cellulose and lignin substrates. We find that the glycosylation pattern of the CBM exhibits a strong influence on the binding affinity and the selectivity between both cellulose and lignin. In addition, the large set of binding data collected allows us to examine the relationship between binding affinity and the correlation in motion between pairs of glycosylation sites. Our results suggest that glycoforms displaying highly correlated motion in their glycosylation sites tend to bind cellulose with high affinity and lignin with low affinity. Taken together, this work helps lay the groundwork for future exploitation of glycoengineering as a tool to improve the performance of industrial enzymes.

Improved understanding of the effect of protein glycosylation is expected to provide the foundation for the design of protein glycoengineering strategies.

Protein Glycoengineering: An Approach for Improving Protein Properties

Natural proteins are an important source of therapeutic agents and industrial enzymes. While many of them have the potential to be used as highly effective medical treatments for a wide range of diseases or as catalysts for conversion of a range of molecules into important product types required by modern society, problems associated with poor biophysical and biological properties have limited their applications. Engineering proteins with reduced side-effects and/or improved biophysical and biological properties is therefore of great importance. As a common protein modification, glycosylation has the capacity to greatly influence these properties. Over the past three decades, research from many disciplines has established the importance of glycoengineering in overcoming the limitations of proteins. In this review, we will summarize the methods that have been used to glycoengineer proteins and briefly discuss some representative examples of these methods, with the goal of providing a general overview of this research area.

Functional analysis of chimeric TrCel6A enzymes with different carbohydrate binding modules

The glycoside hydrolase (GH) family 6 is an important group of enzymes that constitute an essential part of industrial enzyme cocktails used to convert lignocellulose into fermentable sugars. In nature, enzymes from this family often have a carbohydrate binding module (CBM) from the CBM family 1. These modules are known to promote adsorption to the cellulose surface and influence enzymatic activity. Here, we have investigated the functional diversity of CBMs found within the GH6 family. This was done by constructing five chimeric enzymes based on the model enzyme, TrCel6A, from the soft-rot fungus Trichoderma reesei. The natural CBM of this enzyme was exchanged with CBMs from other GH6 enzymes originating from different cellulose degrading fungi. The chimeric enzymes were expressed in the same host and investigated in adsorption and quasi-steady-state kinetic experiments. Our results quantified functional differences of these phylogenetically distant binding modules. Thus, the partitioning coefficient for substrate binding varied 4-fold, while the maximal turnover (kcat) showed a 2-fold difference. The wild-type enzyme showed the highest cellulose affinity on all tested substrates and the highest catalytic turnover. The CBM from Serendipita indica strongly promoted the enzyme's ability to form productive complexes with sites on the substrate surface but showed lower turnover of the complex. We conclude that the CBM plays an important role for the functional differences between GH6 wild-type enzymes.

A Novel Cellobiohydrolase I (CBHI) from Penicillium digitatum: Production, Purification, and Characterization

A new cellulase producer strain of Penicillium digitatum (RV 06) was previously obtained from rotten maize grains. This work aim was to optimize the production and characterize this microorganism produced cellulase. A CMCase maximum production (1.6 U/mL) was obtained in stationary liquid culture, with an initial pH of 5.0, at 25 °C, with 1% lactose as carbon source, and cultured for 5 days. The produced enzyme was purified by ammonium sulfate precipitation and exclusion chromatography. The purified enzyme optimal temperature and pH were 60 °C and 5.2, respectively. The experimental T_m of thermal inactivation was 63.68 °C, and full activity was recovered after incubation of 7 h at 50 °C. The purified 74 kDa CMCase presented K_M for CMC of 11.2 mg/mL, V_max of 0.13 μmol/min, k_cat of 52 s^-1, and k_cat/K_M of 4.7 (mg/mL)^-1 s^-1. The purified enzyme had a high specificity for CMC and p-nitrophenyl cellobioside and released glucose and cellobiose as final products of the CMC hydrolysis. The enzyme trypsin digestion produced peptides whose masses were obtained by MALDI-TOF/TOF mass spectrometry, which was also used to obtain two peptide sequences. These peptide sequences and the mass peak profile retrieved a CBHI within the annotated genome of P. digitatum PD1. Sequence alignments and phylogenetic analysis confirmed this enzyme as a CBHI of the glycoside hydrolase family 7. The P. digitatum PD1 protein in silico structural model revealed a coil and β-conformation predominance, which was confirmed by circular dichroism of the P. digitatum RV 06 purified enzyme.

In-depth characterization of Trichoderma reesei cellobiohydrolase TrCel7A produced in Nicotiana benthamiana reveals limitations of cellulase production in plants by host-specific post-translational modifications

Sustainable production of biofuels from lignocellulose feedstocks depends on cheap enzymes for degradation of such biomass. Plants offer a safe and cost-effective production platform for biopharmaceuticals, vaccines and industrial enzymes boosting biomass conversion to biofuels. Production of intact and functional protein is a prerequisite for large-scale protein production, and extensive host-specific post-translational modifications (PTMs) often affect the catalytic properties and stability of recombinant enzymes. Here we investigated the impact of plant PTMs on enzyme performance and stability of the major cellobiohydrolase TrCel7A from Trichoderma reesei, an industrially relevant enzyme. TrCel7A was produced in Nicotiana benthamiana using a vacuum-based transient expression technology, and this recombinant enzyme (TrCel7Arec ) was compared with the native fungal enzyme (TrCel7Anat ) in terms of PTMs and catalytic activity on commercial and industrial substrates. We show that the N-terminal glutamate of TrCel7Arec was correctly processed by N. benthamiana to a pyroglutamate, critical for protein structure, while the linker region of TrCel7Arec was vulnerable to proteolytic digestion during protein production due to the absence of O-mannosylation in the plant host as compared with the native protein. In general, the purified full-length TrCel7Arec had 25% lower catalytic activity than TrCel7Anat and impaired substrate-binding properties, which can be attributed to larger N-glycans and lack of O-glycans in TrCel7Arec . All in all, our study reveals that the glycosylation machinery of N. benthamiana needs tailoring to optimize the production of efficient cellulases.

Heterologous expression of Neurospora crassa cbh1 gene in Pichia pastoris resulted in production of a neutral cellobiohydrolase I

The high production cost of cellulase is one of the limitations that hinder the commercialization of lignocellulose-based biorefineries. As one of the important cellulases, Neurospora crassa cellulase is not so intensively investigated as T. reesei cellulase. In this study, the cbh1gene (NCU07340) cloned from N. crassa was expressed in Pichia pastoris under the control of alcohol oxidase 1 (AOX1) promotor. Six transformants with the highest resistance to G418 were selected by two rounds of transformant screening, among which the most robust producer of the recombinant cellobiohydrolase I (CBHI) has an Avicelase activity of 0.22 U/mL. After fermentation optimization, it was improved to 0.30 U/mL. Interestingly, the optimal temperature and pH of the recombinant CBHI were 60°C and 7.2, respectively, and it was quite stable within the wide ranges of temperature and pH. This work is a good example for the future improvement and optimization of N. crassa cellulase.

Proteomic researches for lignocellulose-degrading enzymes: A mini-review

Protective action of lignin/hemicellulose networks and crystalline structures of embedded cellulose render lignocellulose material resistant to external enzymatic attack. To eliminate this bottleneck, research has been conducted in which advanced proteomic techniques are applied to identify effective commercial hydrolytic enzymes. This mini-review summarizes researches on lignocellulose-degrading enzymes, the mechanisms of the responses of various lignocellulose-degrading strains and microbial communities to various carbon sources and various biomass substrates, post-translational modifications of lignocellulose-degrading enzymes, new lignocellulose-degrading strains, new lignocellulose-degrading enzymes and a new method of secretome analysis. The challenges in the practical use of enzymatic hydrolysis process to realize lignocellulose biorefineries are discussed, along with the prospects for the same.

Quantitative multiplexed profiling of Penicillium funiculosum secretome grown on polymeric cellulase inducers and glucose

Filamentous fungi respond to the need to secure utilisable carbon from their growth milieu by secreting unique extracellular proteins depending upon the types of polymeric substrates. We have here profiled the variations in the secretome pattern of a non-model hypercellulolytic fungus - Penicillium funiculosum, grown in minimal media containing four different polymeric cellulase inducers, i.e., Avicel, wheat bran, ammonium-pretreated wheat straw and Avicel & wheat bran, and glucose over its early and late log phases of growth. Of the 137 secreted proteins validated at 1% FDR, we identified the quantified proteins in three clusters as early, persistently or lately expressed. The type of carbon substrate present in the culture media significantly affected the levels of cellulolytic enzymes expression by the fungus. The top abundant proteins quantified in the secretome for Avicel and wheat bran were cellobiohydrolaseI [GH7-CBM1], cellobiohydrolaseII [GH6-CBM1], β-glucosidase [GH3], arabinofuranosidase [GH51] and β-xylosidase [GH3], with bicupin being highest in case of wheat straw. Our results further suggested that the fungus secreted the extracellular proteins in waves, such that the initial responders act to hydrolyse the composite substrates in the culture environment before the second wave of proteins which tend to be more tailored to the specific substrate in the cultivating media.

BIOLOGICAL SIGNIFICANCE

In this article, we have comprehensively examined the dynamics of the secretome of a non-model hypercellulolytic fungus produced in response to model and composite cellulase inducers. Our study has provided additional insights into how the fungus enzyme machinery responds to the presence of different polymeric cellulase inducers over the two different growth phases (early growth and late growth phase). The comprehensive typing and quantification of the different proteins present in the secretomes of the cellulolytic fungal strains in response to diverse nutrient sources hold many prospects in understanding the fungus unique enzyme machinery and dynamics for the downstream biotechnological applications.

Engineering enhanced cellobiohydrolase activity

Glycoside Hydrolase Family 7 cellobiohydrolases (GH7 CBHs) catalyze cellulose depolymerization in cellulolytic eukaryotes, making them key discovery and engineering targets. However, there remains a lack of robust structure–activity relationships for these industrially important cellulases. Here, we compare CBHs from Trichoderma reesei (TrCel7A) and Penicillium funiculosum (PfCel7A), which exhibit a multi-modular architecture consisting of catalytic domain (CD), carbohydrate-binding module, and linker. We show that PfCel7A exhibits 60% greater performance on biomass than TrCel7A. To understand the contribution of each domain to this improvement, we measure enzymatic activity for a library of CBH chimeras with swapped subdomains, demonstrating that the enhancement is mainly caused by PfCel7A CD. We solve the crystal structure of PfCel7A CD and use this information to create a second library of TrCel7A CD mutants, identifying a TrCel7A double mutant with near-equivalent activity to wild-type PfCel7A. Overall, these results reveal CBH regions that enable targeted activity improvements.

Cellobiohydrolases (CBHs) are critical for natural and industrial biomass degradation but their structure–activity relationships are not fully understood. Here, the authors present the biochemical and structural characterization of two CBHs, identifying protein regions that confer enhanced CBH activity.

Oxygen Activation by Cu LPMOs in Recalcitrant Carbohydrate Polysaccharide Conversion to Monomer Sugars

Natural carbohydrate polymers such as starch, cellulose, and chitin provide renewable alternatives to fossil fuels as a source for fuels and materials. As such, there is considerable interest in their conversion for industrial purposes, which is evidenced by the established and emerging markets for products derived from these natural polymers. In many cases, this is achieved via industrial processes that use enzymes to break down carbohydrates to monomer sugars. One of the major challenges facing large-scale industrial applications utilizing natural carbohydrate polymers is rooted in the fact that naturally occurring forms of starch, cellulose, and chitin can have tightly packed organizations of polymer chains with low hydration levels, giving rise to crystalline structures that are highly recalcitrant to enzymatic degradation. The topic of this review is oxidative cleavage of carbohydrate polymers by lytic polysaccharide mono-oxygenases (LPMOs). LPMOs are copper-dependent enzymes (EC 1.14.99.53-56) that, with glycoside hydrolases, participate in the degradation of recalcitrant carbohydrate polymers. Their activity and structural underpinnings provide insights into biological mechanisms of polysaccharide degradation.

Deletion of a single glycosyltransferase in Caldicellulosiruptor bescii eliminates protein glycosylation and growth on crystalline cellulose

Protein glycosylation pathways have been identified in a variety of bacteria and are best understood in pathogens and commensals in which the glycosylation targets are cell surface proteins, such as S layers, pili, and flagella. In contrast, very little is known about the glycosylation of bacterial enzymes, especially those secreted by cellulolytic bacteria. Caldicellulosiruptor bescii secretes several unique synergistic multifunctional biomass-degrading enzymes, notably cellulase A which is largely responsible for this organism's ability to grow on lignocellulosic biomass without the conventional pretreatment. It was recently discovered that extracellular CelA is heavily glycosylated. In this work, we identified an O-glycosyltransferase in the C. bescii chromosome and targeted it for deletion. The resulting mutant was unable to grow on crystalline cellulose and showed no detectable protein glycosylation. Multifunctional biomass-degrading enzymes in this strain were rapidly degraded. With the genetic tools available in C. bescii, this system represents a unique opportunity to study the role of bacterial enzyme glycosylation as well an investigation of the pathway for protein glycosylation in a non-pathogen.

Distinct roles of N- and O-glycans in cellulase activity and stability

In nature, many microbes secrete mixtures of glycoside hydrolases, oxidoreductases, and accessory enzymes to deconstruct polysaccharides and lignin in plants. These enzymes are often decorated with N- and O-glycosylation, the roles of which have been broadly attributed to protection from proteolysis, as the extracellular milieu is an aggressive environment. Glycosylation has been shown to sometimes affect activity, but these effects are not fully understood. Here, we examine N- and O-glycosylation on a model, multimodular glycoside hydrolase family 7 cellobiohydrolase (Cel7A), which exhibits an O-glycosylated carbohydrate-binding module (CBM) and an O-glycosylated linker connected to an N- and O-glycosylated catalytic domain (CD)-a domain architecture common to many biomass-degrading enzymes. We report consensus maps for Cel7A glycosylation that include glycan sites and motifs. Additionally, we examine the roles of glycans on activity, substrate binding, and thermal and proteolytic stability. N-glycan knockouts on the CD demonstrate that N-glycosylation has little impact on cellulose conversion or binding, but does have major stability impacts. O-glycans on the CBM have little impact on binding, proteolysis, or activity in the whole-enzyme context. However, linker O-glycans greatly impact cellulose conversion via their contribution to proteolysis resistance. Molecular simulations predict an additional role for linker O-glycans, namely that they are responsible for maintaining separation between ordered domains when Cel7A is engaged on cellulose, as models predict α-helix formation and decreased cellulose interaction for the nonglycosylated linker. Overall, this study reveals key roles for N- and O-glycosylation that are likely broadly applicable to other plant cell-wall-degrading enzymes.

A bacterial pioneer produces cellulase complexes that persist through community succession

Cultivation of microbial consortia provides low-complexity communities that can serve as tractable models to understand community dynamics. Time-resolved metagenomics demonstrated that an aerobic cellulolytic consortium cultivated from compost exhibited community dynamics consistent with the definition of an endogenous heterotrophic succession. The genome of the proposed pioneer population, ‘Candidatus Reconcilibacillus cellulovorans’, possessed a gene cluster containing multidomain glycoside hydrolases (GHs). Purification of the soluble cellulase activity from a 300litre cultivation of this consortium revealed that ~70% of the activity arose from the ‘Ca. Reconcilibacillus cellulovorans’ multidomain GHs assembled into cellulase complexes through glycosylation. These remarkably stable complexes have supramolecular structures for enzymatic cellulose hydrolysis that are distinct from cellulosomes. The persistence of these complexes during cultivation indicates that they may be active through multiple cultivations of this consortium and act as public goods that sustain the community. The provision of extracellular GHs as public goods may influence microbial community dynamics in native biomass-deconstructing communities relevant to agriculture, human health and biotechnology.

Cultivation of a cellulolytic consortium reveals successional community dynamics and the presence of multidomain glycoside hydrolases assembled into stable complexes distinct from cellulosomes, which are produced by a potential pioneer population.

Cellobiohydrolase B of Aspergillus niger over-expressed in Pichia pastoris stimulates hydrolysis of oil palm empty fruit bunches

BACKGROUND

Aspergillus niger, along with many other lignocellulolytic fungi, has been widely used as a commercial workhorse for cellulase production. A fungal cellulase system generally includes three major classes of enzymes i.e., β-glucosidases, endoglucanases and cellobiohydrolases. Cellobiohydrolases (CBH) are vital to the degradation of crystalline cellulose present in lignocellulosic biomass. However, A. niger naturally secretes low levels of CBH. Hence, recombinant production of A. niger CBH is desirable to increase CBH production yield and also to allow biochemical characterisation of the recombinant CBH from A. niger.

METHODS

In this study, the gene encoding a cellobiohydrolase B (cbhB) from A. niger ATCC 10574 was cloned and expressed in the methylotrophic yeast Pichia pastoris X-33. The recombinant CBHB was purified and characterised to study its biochemical and kinetic characteristics. To evaluate the potential of CBHB in assisting biomass conversion, CBHB was supplemented into a commercial cellulase preparation (Cellic^® CTec2) and was used to hydrolyse oil palm empty fruit bunch (OPEFB), one of the most abundant lignocellulosic waste from the palm oil industry. To attain maximum saccharification, enzyme loadings were optimised by response surface methodology and the optimum point was validated experimentally. Hydrolysed OPEFB samples were analysed using attenuated total reflectance FTIR spectroscopy (ATR-FTIR) to screen for any compositional changes upon enzymatic treatment.

RESULTS

Recombinant CBHB was over-expressed as a hyperglycosylated protein attached to N-glycans. CBHB was enzymatically active towards soluble substrates such as 4-methylumbelliferyl-β-D-cellobioside (MUC), p-nitrophenyl-cellobioside (pNPC) and p-nitrophenyl-cellobiotrioside (pNPG3) but was not active towards crystalline substrates like Avicel^® and Sigmacell cellulose. Characterisation of purified CBHB using MUC as the model substrate revealed that optimum catalysis occurred at 50 °C and pH 4 but the enzyme was stable between pH 3 to 10 and 30 to 80 °C. Although CBHB on its own was unable to digest crystalline substrates, supplementation of CBHB (0.37%) with Cellic^® CTec2 (30%) increased saccharification of OPEFB by 27%. Compositional analyses of the treated OPEFB samples revealed that CBHB supplementation reduced peak intensities of both crystalline cellulose Iα and Iβ in the treated OPEFB samples.

DISCUSSION

Since CBHB alone was inactive against crystalline cellulose, these data suggested that it might work synergistically with other components of Cellic^® CTec2. CBHB supplements were desirable as they further increased hydrolysis of OPEFB when the performance of Cellic^® CTec2 was theoretically capped at an enzyme loading of 34% in this study. Hence, A. niger CBHB was identified as a potential supplementary enzyme for the enzymatic hydrolysis of OPEFB.

Characterization of an ionic liquid-tolerant β-xylosidase from a marine-derived fungal endophyte

Ionic liquids (ILs) are used in lignocellulosic biomass (LCB) pretreatment because of their ability to disrupt the extensive hydrogen-bonding network in cellulose and hemicellulose, and thereby decrease LCB recalcitrance to subsequent enzymatic degradation. However, this approach necessitates the development of cellulases and hemicellulases that can tolerate ∼20% (w/v) IL, an amount that either co-precipitates with the sugar polymers after the initial pretreatment or is typically used in single-pot biomass deconstructions. By investigating the secretomes from 4 marine-derived fungal endophytes, we identified a β-xylosidase derived from Trichoderma harzianum as the most promising in terms of tolerating 1-ethyl-3-methylimidazolium-dimethyl phosphate (EMIM-DMP), an IL. When tested with p-nitrophenyl-β-d-xyloside, this extracellular xylosidase retained ∼50% activity even in 1.2 mol·L–1 (20% w/v) EMIM-DMP after incubation for 48 h. When tested on the natural substrate xylobiose, there was ∼85% of the initial activity in 1.2 mol·L–1 EMIM-DMP after incubation for 9 h and ∼80% after incubation for 48 h. Despite previous findings associating thermostability and IL tolerance, our findings related to the mesophilic T. harzianum β-xylosidase(s) emphasize the need to include the marine habitat in the bioprospecting dragnet for identification of new IL-tolerant LCB-degrading enzymes.

Enhancing structural characterisation of glucuronidated O-linked glycans using negative mode ion trap higher energy collision-induced dissociation mass spectrometry

RATIONALE

High protein production and secretion with eukaryotic glycosylation machinery make T. reesei RUT-C30 a suitable expression host for recombinant proteins. The N-glycosylation of secreted proteins of RUT-C30 is known to vary depending on culture nutrients but O-glycosylation has been less extensively studied.

METHODS

O-Glycans and glycopeptides from secreted proteins were separated by porous graphitised carbon and C-18 liquid chromatography, respectively. O-Glycans were analysed in negative ion mode by electrospray ionisation linear ion trap mass spectrometry and glycopeptides in positive ion mode by electrospray ionisation hybrid quadrupole-orbitrap mass spectrometry. Tandem mass spectrometry was used on O-glycans and glycopeptides including ion trap higher energy collision-induced dissociation (tHCD) to detect glycan fragments not detectable with standard ion trap fragmentation. tHCD allowed targeted MS³ experiments to be performed on structures containing hexuronic acid, which was not possible with ion trap CID, validating this novel O-glycan composition. Positive mode C18-LC/ESI-MS/MS was used to identify and characterise glycopeptides found to be modified with this class of O-glycans, identifying cellobiohydrolase I as a carrier of these novel O-glycans.

RESULTS

Negative mode ion trap higher energy collision-induced dissociation allowed detection and targeted MS³ experiments to be performed on the hexuronic acid substituent of O-glycan structures, which was not possible with ion trap CID, validating the novel O-glycan composition to include hexuronic acid. Using glycopeptide analysis, this novel O-glycan composition was found to be present on the catalytic domain of cellobiohydrolase I, the most abundant secreted protein by T. reesei.

CONCLUSIONS

These are the first reported O-glycans to contain acidic sugars in fungi and they could have significant implications for cellobiohydrolase I structure and activity as well as the activity of recombinant proteins expressed in this host system. Copyright © 2017 John Wiley & Sons, Ltd.

N-glycosylation influences the catalytic activity of mosquito α-glucosidases associated with susceptibility or refractoriness to Lysinibacillus sphaericus

Cqm1 and Aam1 are α-glucosidases (EC 3.2.1.20) expressed in Culex quinquefasciatus and Aedes aegypti larvae midgut, respectively. These orthologs share high sequence similarity but while Cqm1 acts as a receptor for the Binary (Bin) insecticidal toxin from Lysinibacillus sphaericus, Aam1 does not bind the toxin, rendering Ae. aegypti refractory to this bacterium. Aam1 is heavily glycosylated, contrasting to Cqm1, but little is known regarding how glycosylation impacts on its function. This study aimed to compare the N-glycosylation patterns and the catalytic activities of Aam1 and Cqm1. Mutant proteins were generated where predicted Aam1 N-glycosylation sites (N-PGS) were either inserted into Cqm1 or abrogated in Aam1. The mutants validated four N-PGS which were found to localize externally on the Aam1 structure. These Aam1 and Cqm1 mutants maintained their Bin binding properties, confirming that glycosylation has no role in this interaction. The α-glucosidase activity of both proteins was next investigated, with Aam1 having a remarkably higher catalytic efficiency, influenced by changes in glycosylation. Molecular dynamics showed that glycosylated and nonglycosylated Aam1 models displayed distinct patterns that could influence their catalytic activity. Differential N-glycosylation may then be associated with higher catalytic efficiency in Aam1, enhancing the functional diversity of related orthologs.

Management of enzyme diversity in high-performance cellulolytic cocktails

BACKGROUND

Modern biorefineries require enzymatic cocktails of improved efficiency to generate fermentable sugars from lignocellulosic biomass. Cellulolytic fungi, among other microorganisms, have demonstrated the highest potential in terms of enzymatic productivity, complexity and efficiency. On the other hand, under cellulolytic-inducing conditions, they often produce a considerable diversity of carbohydrate-active enzymes which allow them to adapt to changing environmental conditions. However, industrial conditions are fixed and adjusted to the optimum of the whole cocktail, resulting in underperformance of individual enzymes.

RESULTS

One of these cellulolytic cocktails from Myceliophthora thermophila has been analyzed here by means of LC-MS/MS. Pure GH6 family members detected have been characterized, confirming previous studies, and added to whole cocktails to compare their contribution in the hydrolysis of industrial substrates. Finally, independent deletions of two GH6 family members, as an example of the enzymatic diversity management, led to the development of a strain producing a more efficient cellulolytic cocktail.

CONCLUSIONS

These data indicate that the deletion of noncontributive cellulases (here EG VI) can increase the cellulolytic efficiency of the cocktail, validating the management of cellulase diversity as a strategy to obtain improved fungal cellulolytic cocktails.

Improving the activity of endoglucanase I (EGI) from Saccharomyces cerevisiae by DNA shuffling

To enhance the endo-β-1,4-glucanase activity of three mixedTrichodermasp. (Trichoderma reesei, Trichoderma longibrachiatum, andTrichoderma pseudokoningii), we optimized the efficiency of the encoding gene using DNA shuffling andSaccharomyces cerevisiaeINVSc1 as a host.

Expression and secretion of glycosylated heparin biosynthetic enzymes using Komagataella pastoris

Heparin, an anticoagulant drug, is biosynthesized in selected animal cells. The heparin biosynthetic enzymes mainly consist of sulfotransferases and all are integral transmembrane glycoproteins. These enzymes are generally produced in engineered Escherichia coli as without their transmembrane domains as non-glycosylated fusion proteins. In this study, we used the yeast, Komagataella pastoris, to prepare four sulfotransferases involved in heparin biosynthesis as glycoproteins. While the yields of these yeast-expressed enzymes were considerably lower than E. coli-expressed enzymes, these enzymes were secreted into the fermentation media simplifying their purification and were endotoxin free. The activities of these sulfotransferases, expressed as glycoproteins in yeast, were compared to the bacterially expressed proteins. The yeast-expressed sulfotransferase glycoproteins showed improved kinetic properties than the bacterially expressed proteins.

The thermophilic biomass-degrading fungus Thielavia terrestris Co3Bag1 produces a hyperthermophilic and thermostable β-1,4-xylanase with exo- and endo-activity

A hyperthermophilic and thermostable xylanase of 82 kDa (TtXynA) was purified from the culture supernatant of T. terrestris Co3Bag1, grown on carboxymethyl cellulose (CMC), and characterized biochemically. TtXynA showed optimal xylanolytic activity at pH 5.5 and at 85 °C, and retained more than 90% of its activity at a broad pH range (4.5-10). The enzyme is highly thermostable with a half-life of 23.1 days at 65 °C, and active in the presence of several metal ions. Circular dichroism spectra strongly suggest the enzyme gains secondary structures when temperature increases. TtXynA displayed higher substrate affinity and higher catalytic efficiency towards beechwood xylan than towards birchwood xylan, oat-spelt xylan, and CMC. According to its final hydrolysis products, TtXynA displays endo-/exo-activity, yielded xylobiose, an unknown oligosaccharide containing about five residues of xylose and a small amount of xylose on beechwood xylan. Finally, this report represents the description of the first fungal hyperthermophilic xylanase which is produced by T. terrestris Co3Bag1. Since TtXynA displays relevant biochemical properties, it may be a suitable candidate for biotechnological applications carried out at high temperatures, like the enzymatic pretreatment of plant biomass for the production of bioethanol.

Cell wall targeted in planta iron accumulation enhances biomass conversion and seed iron concentration in Arabidopsis and rice

Conversion of nongrain biomass into liquid fuel is a sustainable approach to energy demands as global population increases. Previously, we showed that iron can act as a catalyst to enhance the degradation of lignocellulosic biomass for biofuel production. However, direct addition of iron catalysts to biomass pretreatment is diffusion-limited, would increase the cost and complexity of biorefinery unit operations and may have deleterious environmental impacts. Here, we show a new strategy for in planta accumulation of iron throughout the volume of the cell wall where iron acts as a catalyst in the deconstruction of lignocellulosic biomass. We engineered CBM-IBP fusion polypeptides composed of a carbohydrate-binding module family 11 (CBM11) and an iron-binding peptide (IBP) for secretion into Arabidopsis and rice cell walls. CBM-IBP transformed Arabidopsis and rice plants show significant increases in iron accumulation and biomass conversion compared to respective controls. Further, CBM-IBP rice shows a 35% increase in seed iron concentration and a 40% increase in seed yield in greenhouse experiments. CBM-IBP rice potentially could be used to address iron deficiency, the most common and widespread nutritional disorder according to the World Health Organization.

Single-molecule Imaging Analysis of Binding, Processive Movement, and Dissociation of Cellobiohydrolase Trichoderma reesei Cel6A and Its Domains on Crystalline Cellulose

Trichoderma reesei Cel6A (TrCel6A) is a cellobiohydrolase that hydrolyzes crystalline cellulose into cellobiose. Here we directly observed the reaction cycle (binding, surface movement, and dissociation) of single-molecule intact TrCel6A, isolated catalytic domain (CD), cellulose-binding module (CBM), and CBM and linker (CBM-linker) on crystalline cellulose I_α The CBM-linker showed a binding rate constant almost half that of intact TrCel6A, whereas those of the CD and CBM were only one-tenth of intact TrCel6A. These results indicate that the glycosylated linker region largely contributes to initial binding on crystalline cellulose. After binding, all samples showed slow and fast dissociations, likely caused by the two different bound states due to the heterogeneity of cellulose surface. The CBM showed much higher specificity to the high affinity site than to the low affinity site, whereas the CD did not, suggesting that the CBM leads the CD to the hydrophobic surface of crystalline cellulose. On the cellulose surface, intact molecules showed slow processive movements (8.8 ± 5.5 nm/s) and fast diffusional movements (30-40 nm/s), whereas the CBM-Linker, CD, and a catalytically inactive full-length mutant showed only fast diffusional movements. These results suggest that both direct binding and surface diffusion contribute to searching of the hydrolysable point of cellulose chains. The duration time constant for the processive movement was 7.7 s, and processivity was estimated as 68 ± 42. Our results reveal the role of each domain in the elementary steps of the reaction cycle and provide the first direct evidence of the processive movement of TrCel6A on crystalline cellulose.

Single cell oil production by Mortierella isabellina from steam exploded corn stover degraded by three-stage enzymatic hydrolysis in the context of on-site enzyme production

Single cell oil (SCO), promising as alternative oil source, was produced from steam exploded corn stover (SECS) by Mortierella isabellina. Different bioprocesses from SECS to SCO were compared and the bioprocess C using the three-stage enzymatic hydrolysis was found to be the most efficient one. The bioprocess C used the lowest enzyme input 20FPIU cellulase/g glucan and the shortest time 222h, but produced 44.94g dry cell biomass and 25.77g lipid from 327.63g dry SECS. It had the highest lipid content 57.34%, and its productivities and yields were much higher than those of the bioprocess B and comparable to the bioprocess A, indicating that the three-stage enzymatic hydrolysis could greatly improve the efficiency of the bioprocess from high solid loading SECS to SCO by Mortierella isabellina. This work testified the application value of three-stage enzymatic hydrolysis in lignocellulose-based bioprocesses.

Mapping N-linked glycosylation of carbohydrate-active enzymes in the secretome of Aspergillus nidulans grown on lignocellulose

BACKGROUND

The genus Aspergillus includes microorganisms that naturally degrade lignocellulosic biomass, secreting large amounts of carbohydrate-active enzymes (CAZymes) that characterize their saprophyte lifestyle. Aspergillus has the capacity to perform post-translational modifications (PTM), which provides an additional advantage for the use of these organisms as a host for the production of heterologous proteins. In this study, the N-linked glycosylation of CAZymes identified in the secretome of Aspergillus nidulans grown on lignocellulose was mapped.

RESULTS

Aspergillus nidulans was grown in glucose, xylan and pretreated sugarcane bagasse (SCB) for 96 h, after which glycoproteomics and glycomics were carried out on the extracellular proteins (secretome). A total of 265 proteins were identified, with 153, 210 and 182 proteins in the glucose, xylan and SCB substrates, respectively. CAZymes corresponded to more than 50 % of the total secretome in xylan and SCB. A total of 182 N-glycosylation sites were identified, of which 121 were detected in 67 CAZymes. A prevalence of the N-glyc sequon N-X-T (72.2 %) was observed in N-glyc sites compared with N-X-S (27.8 %). The amino acids flanking the validated N-glyc sites were mainly composed of hydrophobic and polar uncharged amino acids. Selected proteins were evaluated for conservation of the N-glyc sites in Aspergilli homologous proteins, but a pattern of conservation was not observed. A global analysis of N-glycans released from the proteins secreted by A. nidulans was also performed. While the proportion of N-glycans with Hex5 to Hex9 was similar in the xylan condition, a prevalence of Hex5 was observed in the SCB and glucose conditions.

CONCLUSIONS

The most common and frequent N-glycosylated motifs, an overview of the N-glycosylation of the CAZymes and the number of mannoses found in N-glycans were analyzed. There are many bottlenecks in protein production by filamentous fungi, such as folding, transport by vesicles and secretion, but N-glycosylation in the correct context is a fundamental event for defining the high levels of secretion of target proteins. A comprehensive analysis of the protein glycosylation processes in A. nidulans will assist with a better understanding of glycoprotein structures, profiles, activities and functions. This knowledge can help in the optimization of heterologous expression and protein secretion in the fungal host.