Synthesis of Au@Pd core–shell nanoparticles with controllable size and their application in surface-enhanced Raman spectroscopy

Sixty years of electrochemical optical spectroscopy: a retrospective

Sixty years ago, Reddy, Devanatan, and Bockris performed the first in situ electrochemical ellipsometry experiment, which ushered in a new era in the study of electrochemistry, using optical spectroscopy. After six decades of development, electrochemical optical spectroscopy, particularly electrochemical vibrational spectroscopy, has advanced from a phase of immaturity with few methods and limited applications to a phase of maturity with excellent substrate generality and significantly improved resolutions. Here, we divide the development of electrochemical optical spectroscopy into four phases, focusing on the proof-of-concept of different electrochemical optical spectroscopy studies, the emergence of plasmonic enhancement-based electrochemical optical spectroscopic (in particular vibrational spectroscopic) methods, the realization of electrochemical vibrational spectroscopy on well-defined surfaces, and the efforts to achieve operando spectroelectrochemical applications. Finally, we discuss the future development trend of electrochemical optical spectroscopy, as well as examples of new methodology and research paradigms for operando spectroelectrochemistry.

Rapid Fabrication of Fe and Pd Thin Films as SERS-Active Substrates via Dynamic Hydrogen Bubble Template Method

Fe and Pd thin film samples have been fabricated in a rapid fashion utilizing the versatile technique of dynamic hydrogen bubble template (DHBT) method via potentiostatic electrodeposition over a copper substrate. The morphology of the samples is dendritic, with the composition being directly proportional to the deposition time. All the samples have been tested as SERS substrates for the detection of Rhodamine 6G (R6G) dye. The samples perform very well, with the best performance shown by the Pd samples. The lowest detectable R6G concentration was found to be 10^-6 M (479 μgL^-1) by one of the Pd samples with the deposition time of 180 s. The highest enhancement of signals noticed in this sample can be attributed to its morphology, which is more nanostructured compared to other samples, which is extremely conducive to the phenomenon of localized surface plasmon resonance (LSPR). Overall, these samples are cheaper, easy to prepare with a rapid fabrication method, and show appreciable SERS performance.

Synthesis and Characterization of Catalytically Active Au Core─Pd Shell Nanoparticles Supported on Alumina

A two-step seeded-growth method was refined to synthesize Au@Pd core@shell nanoparticles with thin Pd shells, which were then deposited onto alumina to obtain a supported Au@Pd/Al₂O₃ catalyst active for prototypical CO oxidation. By the strict control of temperature and Pd/Au molar ratio and the use of l-ascorbic acid for making both Au cores and Pd shells, a 1.5 nm Pd layer is formed around the Au core, as evidenced by transmission electron microscopy and energy-dispersive spectroscopy. The core@shell structure and the Pd shell remain intact upon deposition onto alumina and after being used for CO oxidation, as revealed by additional X-ray diffraction and X-ray photoemission spectroscopy before and after the reaction. The Pd shell surface was characterized with in situ infrared (IR) spectroscopy using CO as a chemical probe during CO adsorption-desorption. The IR bands for CO ad-species on the Pd shell suggest that the shell exposes mostly low-index surfaces, likely Pd(111) as the majority facet. Generally, the IR bands are blue-shifted as compared to conventional Pd/alumina catalysts, which may be due to the different support materials for Pd, Au versus Al₂O₃, and/or less strain of the Pd shell. Frequencies obtained from density functional calculations suggest the latter to be significant. Further, the catalytic CO oxidation ignition-extinction processes were followed by in situ IR, which shows the common CO poisoning and kinetic behavior associated with competitive adsorption of CO and O₂ that is typically observed for noble metal catalysts.

Modulation Technique of Localized Surface Plasmon Resonance of Palladium Nanospheres by Coating with Titanium Dioxide Shell for Application to Photothermal Therapy Agent

Although plasmonic palladium (Pd) nanospheres are thermodynamically stable and have high photothermal conversion due to the free and bound electron coupling associated with the intrinsic high interband transition, they have not attracted attention as a photothermal conversion material for next-generation photothermal cancer therapy. This is because the Pd nanospheres generate the localized surface plasmon resonance (LSPR) intrinsically in the ultraviolet region, which is far away from the biological transparent window (750-900 nm). In this study, we controlled the LSP wavelength of Pd nanospheres by coating with high refractive index TiO₂ shells taking advantage of the Pd LSPR which is highly sensitive to changes in the local refractive index around the nanospheres. Our calculations indicated that the absorption cross section at 808 nm (corresponding to the wavelength used for photothermal treatment) was increased by 4.5 times by redshifting the LSPR and increasing the extinction intensity associated with the coating with TiO₂ shell. Experiments confirmed the theoretical prediction in that the LSPR of the synthesized Pd nanospheres with a diameter of 81 nm was significantly redshifted by coating with amorphous TiO₂ shell, resulting in significant large extinction intensity at 808 nm. The photothermal conversion efficiency was estimated to be 50%. In vitro cell tests, HeLa cells incubated with 100-300 μg/mL TiO₂-coated Pd nanospheres were efficiently killed by irradiating 808 nm laser (1.8 W) even though the nanospheres with the same concentrations showed little cytotoxicity. These results indicate that the Pd nanospheres coated with high refractive index shells can be promising as a photothermal therapy agent.

Finding a Sensitive Surface-Enhanced Raman Spectroscopic Thermometer at the Nanoscale by Examining the Functional Groups

Temperature variation at the nanoscale is pivotal for the thermodynamics and kinetics of small entities. Surface-enhanced Raman spectroscopy (SERS) is a promising technique for monitoring temperature variations at the nanoscale. A key but ambiguous topic is methods to design a sensitive SERS thermometer. Here, we elucidate that the type of chemical bond of molecular probes and the surface chemical bonding effect are crucial for maximizing the sensitivity of the SERS thermometer, as illustrated by the variable-temperature SERS measurements and quantum chemistry calculations for the frequency-temperature functions of a series of molecules. The sensitivity of the frequency-temperature function follows the sequence of triple bond > double bond > single bond, which is available for both aliphatic and aromatic molecules. The surface chemical bonding effect between the SERS substrate and molecular probe substantially increases the sensitivity of the frequency-temperature function. These results provide universally available guidelines for the rational design of a sensitive SERS thermometer by examining the functional groups of molecular probes.

Continuous-flow syntheses of alloy nanoparticles

Alloy nanoparticles (NPs), including core-shell, segregated and solid-solution types, show a variety of attractive properties such as catalytic and optical properties and are used in a wide range of applications. Precise control and good reproducibility in the syntheses of alloy NPs are highly demanded because these properties are tunable by controlling alloy structures, compositions, particle sizes, and so on. To improve the efficiency and reproducibility of their syntheses, continuous-flow syntheses with various types of reactors have recently been developed instead of the current mainstream approach, batch syntheses. In this review, we focus on the continuous-flow syntheses of alloy NPs and first overview the flow syntheses of NPs, especially of alloy NPs. Subsequently, the details of flow reactors and their chemistry to synthesize core-shell, segregated, solid-solution types of alloy NPs, and high-entropy alloy NPs are introduced. Finally, the challenges and future perspectives in this field are discussed.

Plasmonic Core-Shell Nanomaterials and their Applications in Spectroscopies

Plasmonic core-shell nanostructures have attracted considerable attention in the scientific community recently due to their highly tunable optical properties. Plasmon-enhanced spectroscopies are one of the main applications of plasmonic nanomaterials. When excited by an incident laser of suitable wavelength, strong and highly localized electromagnetic (EM) fields are generated around plasmonic nanomaterials, which can significantly boost excitation and/or radiation processes that amplify Raman, fluorescence, or nonlinear signals and improve spectroscopic sensitivity. Herein, recent developments in plasmon-enhanced spectroscopies utilizing core-shell nanostructures are reviewed, including shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS), plasmon-enhanced fluorescence spectroscopy, and plasmon-enhanced nonlinear spectroscopy.

Light-Scattering Simulations from Spherical Bimetallic Core-Shell Nanoparticles

Bimetallic nanoparticles show novel electronic, optical, catalytic or photocatalytic properties different from those of monometallic nanoparticles and arising from the combination of the properties related to the presence of two individual metals but also from the synergy between the two metals. In this regard, bimetallic nanoparticles find applications in several technological areas ranging from energy production and storage to sensing. Often, these applications are based on optical properties of the bimetallic nanoparticles, for example, in plasmonic solar cells or in surface-enhanced Raman spectroscopy-based sensors. Hence, in these applications, the specific interaction between the bimetallic nanoparticles and the electromagnetic radiation plays the dominant role: properties as localized surface plasmon resonances and light-scattering efficiency are determined by the structure and shape of the bimetallic nanoparticles. In particular, for example, concerning core-shell bimetallic nanoparticles, the optical properties are strongly affected by the core/shell sizes ratio. On the basis of these considerations, in the present work, the Mie theory is used to analyze the light-scattering properties of bimetallic core–shell spherical nanoparticles (Au/Ag, AuPd, AuPt, CuAg, PdPt). By changing the core and shell sizes, calculations of the intensity of scattered light from these nanoparticles are reported in polar diagrams, and a comparison between the resulting scattering efficiencies is carried out so as to set a general framework useful to design light-scattering-based devices for desired applications.

Pd nanoparticles as a plasmonic material: synthesis, optical properties and applications

This review provides an overview of current progress in Pd nanoparticles supporting localized surface plasmon resonance and their applications. We begin by analyzing briefly the optical properties of Pd putting particular focus on outlining the origin of its size- and shape-dependent LSPR, high refractive index sensitivity, and high absorption contribution. The differences in the optical behavior with Au and Ag, the primary plasmonic materials, are highlighted. The main strategies to synthesize Pd nanoparticles, pure or hybrid, with well-defined optical properties are then reviewed. In this section, we include only those works that carry out the study of the optical properties of the nanoparticles. The applications of plasmonic Pd nanoparticles are also discussed in detail. This review is concluded with a section devoted to the future perspectives highlighting the most relevant challenges to be addressed to take Pd nanoparticles from the laboratory to real applications.

Application of Raman Spectroscopy to Working Gas Sensors: From in situ to operando Studies

Understanding the mode of operation of gas sensors is of great scientific and economic interest. A knowledge-based approach requires the development and application of spectroscopic tools to monitor the relevant surface and bulk processes under working conditions (operando approach). In this review we trace the development of vibrational Raman spectroscopy applied to metal-oxide gas sensors, starting from initial applications to very recent operando spectroscopic approaches. We highlight the potential of Raman spectroscopy for molecular-level characterization of metal-oxide gas sensors to reveal important mechanistic information, as well as its versatility regarding the design of in situ/operando cells and the combination with other techniques. We conclude with an outlook on potential future developments.

Recent Advances in 2D Inorganic Nanomaterials for SERS Sensing

Surface-enhanced Raman spectroscopy is a powerful and sensitive analytical tool that has found application in chemical and biomolecule analysis and environmental monitoring. Since its discovery in the early 1970s, a variety of materials ranging from noble metals to nanostructured materials have been employed as surface enhanced Raman scattering (SERS) substrates. In recent years, 2D inorganic materials have found wide use in the development of SERS-based chemical sensors owing to their unique thickness dependent physico-chemical properties with enhanced chemical-based charge-transfer processes. Here, recent advances in the application of various 2D inorganic nanomaterials, including graphene, boron nitride, semiconducting metal oxides, and transition metal chalcogenides, in chemical detection via SERS are presented. The background of the SERS concept, including its basic theory and sensing mechanism, along with the salient features of different nanomaterials used as substrates in SERS, extending from monometallic nanoparticles to nanometal oxides, is comprehensively discussed. The importance of 2D inorganic nanomaterials in SERS enhancement, along with their application toward chemical detection, is explained in detail with suitable examples and illustrations. In conclusion, some guidelines are presented for the development of this promising field in the future.

Improved Surface-Enhanced Raman Scattering Properties of ZrO2 Nanoparticles by Zn Doping

In this study, ZrO₂ and Zn–ZrO₂ nanoparticles (NPs) with a series of Zn ion doping amounts were synthesized by the sol-gel process and utilized as substrates for surface-enhanced Raman scattering (SERS). After absorbing the probing molecule 4–mercaptobenzoic acid, the SERS signal intensities of Zn–ZrO₂ NPs were all greater than that of the pure ZrO₂. The 1% Zn doping concentration ZrO₂ NPs exhibited the highest SERS enhancement, with an enhancement factor (EF) value of up to 10⁴. X-ray diffraction, X-ray photoelectron spectroscopy, Ultraviolet (UV) photoelectron spectrometer, UV–vis spectroscopy, Transmission Electron Microscope (TEM), and Raman spectroscopy were used to characterize the properties of Zn–ZrO₂ NPs and explore the mechanisms behind the SERS phenomenon. The charge transfer (CT) process is considered to be responsible for the SERS performance of 4–MBA adsorbed on Zn–ZrO₂. The results of this study demonstrate that an appropriate doping ratio of Zn ions can promote the charge transfer process between ZrO₂ NPs and probe molecules and significantly improve the SERS properties of ZrO₂ substrates.

Electrically controlled mass transport into microfluidic droplets from nanodroplet carriers with application in controlled nanoparticle flow synthesis

Microfluidic droplets have been applied extensively as reaction vessels in a wide variety of chemical and biological applications. Typically, once the droplets are formed in a flow channel, it is a challenge to add new chemicals to the droplets for subsequent reactions in applications involving multiple processing steps. Here, we present a novel and versatile method that employs a high strength alternating electrical field to tunably transfer chemicals into microfluidic droplets using nanodroplets as chemical carriers. We show that the use of both continuous and cyclic burst square wave signals enables extremely sensitive control over the total amount of chemical added and, equally importantly, the rate of addition of the chemical from the nanodroplet carriers to the microfluidic droplets. An a priori theoretical model was developed to model the mass transport process under the convection-controlled scenario and compared with experimental results. We demonstrate an application of this method in the controlled preparation of gold nanoparticles by reducing chloroauric acid pre-loaded in microfluidic droplets with l-ascorbic acid supplied from miniemulsion nanodroplets. Under different field strengths, l-ascorbic acid is supplied in controllable quantities and addition rates, rendering the particle size and size distribution tunable. Finally, this method also enables multistep synthesis by the stepwise supply of miniemulsions containing different chemical species. We highlight this with a first report of a three-step Au-Pd core-shell nanoparticle synthesis under continuous flow conditions.

Core-Shell Nanoparticle-Enhanced Raman Spectroscopy

Core-shell nanoparticles are at the leading edge of the hot research topics and offer a wide range of applications in optics, biomedicine, environmental science, materials, catalysis, energy, and so forth, due to their excellent properties such as versatility, tunability, and stability. They have attracted enormous interest attributed to their dramatically tunable physicochemical features. Plasmonic core-shell nanomaterials are extensively used in surface-enhanced vibrational spectroscopies, in particular, surface-enhanced Raman spectroscopy (SERS), due to the unique localized surface plasmon resonance (LSPR) property. This review provides a comprehensive overview of core-shell nanoparticles in the context of fundamental and application aspects of SERS and discusses numerous classes of core-shell nanoparticles with their unique strategies and functions. Further, herein we also introduce the concept of shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) in detail because it overcomes the long-standing limitations of material and morphology generality encountered in traditional SERS. We then explain the SERS-enhancement mechanism with core-shell nanoparticles, as well as three generations of SERS hotspots for surface analysis of materials. To provide a clear view for readers, we summarize various approaches for the synthesis of core-shell nanoparticles and their applications in SERS, such as electrochemistry, bioanalysis, food safety, environmental safety, cultural heritage, materials, catalysis, and energy storage and conversion. Finally, we exemplify about the future developments in new core-shell nanomaterials with different functionalities for SERS and other surface-enhanced spectroscopies.

Optical absorption spectra of palladium doped gold cluster cations

Photoabsorption spectra of gas phase Au(n)(+) and Au(n-1)Pd(+) (13 ≤ n ≤ 20) clusters were measured using mass spectrometric recording of wavelength dependent Xe messenger atom photodetachment in the 1.9-3.4 eV photon energy range. Pure cationic gold clusters consisting of 15, 17, and 20 atoms have a higher integrated optical absorption cross section than the neighboring sizes. It is shown that the total optical absorption cross section increases with size and that palladium doping strongly reduces this cross section for all investigated sizes and in particular for n = 14-17 and 20. The largest reduction of optical absorption upon Pd doping is observed for n = 15.

Refractive index susceptibility of the plasmonic palladium nanoparticle: potential as the third plasmonic sensing material

We demonstrate that Pd nanospheres exhibit much higher susceptibility of the localized surface plasmon resonance (LSPR) peak to medium refractive index changes than commonly used plasmonic sensing materials such as Au and Ag. The susceptibility of spherical Au nanoparticle-core/Pd-shell nanospheres (Au/PdNSs, ca. 73 nm in diameter) was found to be 4.9 and 2.5 times higher, respectively, than those of Au (AuNSs) and Ag nanospheres (AgNSs) having similar diameters. The experimental finding was theoretically substantiated using the Mie exact solution. We also showed from a quasi-static (QS) approximation framework that the high susceptibility of Pd LSPR originates from the smaller dispersion of the real part of its dielectric function than those of Au and Ag LSPR around the resonant wavelength. We conclude that the Pd nanoparticle is a promising candidate of "the third plasmonic sensing material" following Au and Ag to be used in ultrahigh-sensitive LSPR sensors.

An ultrasensitive electrochemical immunosensor for the detection of CD146 based on TiO2 colloidal sphere laden Au/Pd nanoparticles

An ultrasensitive electrochemical immunosensor was developed for detecting CD146. rGO-TEPA enhanced the loading capacity of Ab₁ and facilitated the electron transfer. Au and Pd nanoparticles on the TiO₂ colloidal sphere facilitated the decomposition of H₂O₂. The immunosensor exhibited an extremely low detection limit of 1.6 pg mL⁻¹ for CD146.

Facile synthesis of size and wavelength tunable hollow gold nanostructures for the development of a LSPR based label-free fiber-optic biosensor

Hollow bimetallic nanostructures have recently emerged as attractive plasmonic materials due to the ease of optical tunability by changing their size/composition.

Designer titania-supported Au-Pd nanoparticles for efficient photocatalytic hydrogen production

Photocatalytic hydrogen evolution may provide one of the solutions to the shift to a sustainable energy society, but the quantum efficiency of the process still needs to be improved. Precise control of the composition and structure of the metal nanoparticle cocatalysts is essential, and we show that fine-tuning the Au-Pd nanoparticle structure modifies the electronic properties of the cocatalyst significantly. Specifically, Pd(shell)-Au(core) nanoparticles immobilized on TiO2 exhibit extremely high quantum efficiencies for H2 production using a wide range of alcohols, implying that chemical byproducts from the biorefinery industry can be used as feedstocks. In addition, the excellent recyclability of our photocatalyst material indicates a high potential in industrial applications. We demonstrate that this particular elemental segregation provides optimal positioning of the unoccupied d-orbital states, which results in an enhanced utilization of the photoexcited electrons in redox reactions. We consider that the enhanced activity observed on TiO2 is generic in nature and can be transferred to other narrow band gap semiconductor supports for visible light photocatalysis.

Electro-catalytically active Au@Pt nanoparticles for hydrogen evolution reaction: an insight into a tryptophan mediated supramolecular interface towards a universal core–shell synthesis approach

We report an eco-friendly, one-pot, room-temperature method for the rapid synthesis of electrocatalytically active Au@Pt (50 nm) bimetallic nanoparticles via tryptophan (Trp) induced interface in an aqueous environment.

Au/Pd core-shell nanoparticles with varied hollow Au cores for enhanced formic acid oxidation

A facile method has been developed to synthesize Au/Pd core-shell nanoparticles via galvanic replacement of Cu by Pd on hollow Au nanospheres. The unique nanoparticles were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, ultraviolet-visible spectroscopy, and electrochemical measurements. When the concentration of the Au solution was decreased, grain size of the polycrystalline hollow Au nanospheres was reduced, and the structures became highly porous. After the Pd shell formed on these Au nanospheres, the morphology and structure of the Au/Pd nanoparticles varied and hence significantly affected the catalytic properties. The Au/Pd nanoparticles synthesized with reduced Au concentrations showed higher formic acid oxidation activity (0.93 mA cm-2 at 0.3 V) than the commercial Pd black (0.85 mA cm-2 at 0.3 V), suggesting a promising candidate as fuel cell catalysts. In addition, the Au/Pd nanoparticles displayed lower CO-stripping potential, improved stability, and higher durability compared to the Pd black due to their unique core-shell structures tuned by Au core morphologies.

Cooperative effect of Au and Pt inside TiO2 matrix for optical hydrogen detection at room temperature using surface plasmon spectroscopy

Metal (Au, Pt, Au@Pt) and metal oxide (TiO(2)) nanoparticles are synthesized with colloidal techniques and subsequently used as nanocrystal inks for thin films deposition. The optical properties of Au colloids are strongly influenced by both Pt and TiO(2) interfaces: while platinum causes a damping and a blue-shift of the Au Surface Plasmon Resonance (SPR) peak as a consequence of the metal-metal interaction, the anatase matrix is responsible for the red shift of the plasmon frequency due to the increased refractive index. By a careful tailoring of the nanoparticles synthesis, high quality, scattering-free films composed of an anatase matrix embedding Au, Pt and Au@Pt colloids are deposited at room temperature and stabilized at 200 °C. Room temperature exposure of these films to hydrogen leads to optical changes. In the case of Au, there is a slow blue shift of the surface plasmon band, resulting in a wavelength dependent optical response. Much faster but smaller optical changes occur for titania films containing Pt. When both metals are present, the optical response of the gold is much faster. This is attributed to spillover of hydrogen atoms from platinum to gold. This synergy enables enhanced optical sensing of hydrogen at room temperature by combining the low temperature dissociation of H(2) on Pt with the intensive surface plasmon response of the gold nanocrystals.

Rapid green synthesis of palladium nanoparticles using the dried leaf of Anacardium occidentale

A rapid, one pot and biogenic fabrication of Pd nanoparticles is reported. Pd nanoparticles of size below 5 nm size are synthesized using the dried leaf powder of Anacardium occidentale. Rapid reduction results in the formation of spherical particles. The nanoparticles are characterized by XRD, TEM, UV-visible and FTIR analysis. The absorption spectra have continua which are characteristic of Pd nanoparticles. The broad nature of the XRD pattern arising due to reflections from the (111), (200), (220), (311) and (222) planes indicate crystallinity of the nanoparticles with face centered cubic (fcc) structure. The morphology and shape of the nanoparticles are obtained by analyzing TEM images. Most of the nanoparticles are spherical with size in the range 2.5 and 4.5 nm. FTIR spectra of dried Pd nanoparticles, native and treated dried leaf powder have been analyzed to find out the biomolecule responsible for the reduction of Pd(2+) and capping of the palladium nanoparticles. The possible mechanism of formation of the nanoparticles is suggested.

Ultrasmall hollow gold-silver nanoshells with extinctions strongly red-shifted to the near-infrared

Hollow gold-silver nanoshells having systematically varying sizes between 40 and 100 nm were prepared. These particles consist of a hollow spherical silver shell surrounded by a thin gold layer. By varying the volume of the gold stock solution added to suspensions of small silver-core templates, we tailored the hollow gold-silver nanoshells to possess strong tunable optical extinctions that range from the visible to the near-IR spectral regions, with extinctions routinely centered at ∼950 nm. The size and morphology of these core/shell nanoparticles were characterized by dynamic light scattering (DLS), field emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM). Separately, X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) were used for measuring their elemental composition; UV-vis spectroscopy was used to evaluate their optical properties. Given their relatively small size compared to other nanoparticles that absorb strongly at near IR wavelengths, these easy-to-synthesize particles should find use in applications that require ultrasmall nanoparticles with extinctions comfortably beyond visible wavelengths (e.g., medicinal therapies, diagnostic imaging, nanofluidics, and display technologies).

Synthesis and catalytic properties of Au-Pd nanoflowers

Reduction of Pd ions by hydroquinone in the presence of gold nanoparticles and polyvinylpyrrolidone resulted in the formation of nanoflowers with a Au core and Pd petals. Addition of HCl to the synthesis halted the reduction by hydroquinone and enabled the acquisition of snapshots of the nanoflowers at different stages of growth. TEM images of the reaction after 10 s show that the nanoflower morphology resulted from the homogeneous nucleation of Pd clusters in solution and their subsequent attachment to gold seeds coated with a thin (0.8 ± 0.1 nm) shell of Pd. UV-visible spectra also indicate Pd clusters formed in the early stages of the reaction and disappeared as the nanoflowers grew. The speed at which this reaction can be halted is useful not only for producing a variety of bimetallic nanostructures with precisely controlled dimensions and morphologies but also for understanding the growth mechanism of these structures. The ability of the AuPd core-shell structure to catalyze the Suzuki coupling reaction of iodobenzene to phenylboronic acid was probed and compared against the activity of Pd nanocubes and thin-shelled AuPd core-shell nanoparticles. The results of this study suggest that Suzuki coupling was not affected by the surface structure or subsurface composition of the nanoparticles, but instead was primarily catalyzed by molecular Pd species that leached from the nanostructures.

Seed-mediated growth of palladium nanocrystals: the effect of pseudo-halide thiocyanate ions

In synthesis in a solution phase, adsorbates such as halides can interact selectively with different metal crystal facets and affect the final morphology of nanocrystals. Pseudo-halide thiocyanate ions (SCN-) can also adsorb on the metal surface, but they have never been used for the synthesis of shape-controlled colloidal metal nanocrystals. In this study, we first investigated the effect of SCN- on the morphology of palladium nanocrystals through a seed-mediated growth method. The presence of 1 µM SCN- in the growth solutions could lead to the formation of palladium polyhedra: truncated rhombic dodecahedra enclosed by twelve {110}, eight {111} and six {100} facets. The products were nanocubes enclosed with six {100} facets if cetyltrimethylammonium bromide (CTAB) was the only capping agent. Meanwhile, the mechanism of the effect of SCN- on the morphology of Pd nanocrystals is discussed.

Investigation of the Performance ofAucore-Pdshell/C as the Anode Catalyst of Direct Borohydride-Hydrogen Peroxide Fuel Cell

The carbon-supported bimetallic Au-Pd catalyst with core-shell structure is prepared by successive reduction method. The core-shell structure, surface morphology, and electrochemical performances of the catalysts are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), ultraviolet-visible absorption spectrometry, linear sweep voltammetry, and chronopotentiometry. The results show that the Au-Pd/C catalyst with core-shell structure exhibits much higher catalytic activity for the direct oxidation of NaBH4than pure Au/C catalyst. A direct borohydride-hydrogen peroxide fuel cell, in which the Au-Pd/C with core-shell structure is used as the anode catalyst and the Au/C as the cathode catalyst, shows as high as 68.215 mW cm−2power density.