A novel adsorbent of core-shell construction of chitosan-cellulose magnetic carbon foam: Synthesis, characterization and application to remove copper in wastewater

Preparation and characterization of cellulose-chitosan/β-FeOOH composite hydrogels for adsorption and photocatalytic degradation of methyl orange

Biopolymer-based hydrogels have received great attention in wastewater treatment due to their excellent properties, e.g., high adsorption capacity, fast kinetics, reusability and ease of operation. In the present work, cellulose-chitosan/β-FeOOH composite hydrogels were prepared via co-dissolution and regeneration process as well as hydrothermal in situ synthesis of β-FeOOH. Effect of β-FeOOH loading on the properties of the composite hydrogels and the removal efficiency of methyl orange (MO) was investigated. Results showed that β-FeOOH was uniformly loaded onto the hydrogel framework, and the nanoporous structure of composite hydrogels could increase not only the effective contact area between β-FeOOH and the pollutants but also the active sites. Moreover, the increased β-FeOOH loading led to the enhanced MO removal rate under light conditions. When the loading time was extended from 6 h to 9 h, the MO removal rate increased by 21%, which can be mainly due to the photocatalytic degradation. In addition, MO removal rate reached 97.75% within 40 min under optimal conditions and attained 80.81% after five repetitions. The trapping experiment and EPR results indicated that the main active species were hydrogel radicals and holes. Consequently, this work provides an effective preparation approach for cellulose-chitosan/β-FeOOH composite hydrogel with high adsorption and photocatalytic degradation, which would hold great promise for wastewater treatment applications.

Preparation and modification of nanocellulose and its application to heavy metal adsorption: A review

Heavy metals are a notable pollutant in aquatic ecosystems that results in many deadly diseases of the human body after enrichment through the food chain. As an environmentally friendly renewable resource, nanocellulose can be competitive with other materials at removing heavy metal ions due to its large specific surface area, high mechanical strength, biocompatibility and low cost. In this review, the research status of modified nanocellulose for heavy metal adsorbents is primarily reviewed. Two primary forms of nanocellulose are cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs). The preparation process of nanocellulose was derived from natural plants, and the preparation process included noncellulosic constituent removal and extraction of nanocellulose. Focusing on heavy metal adsorption, the modification of nanocellulose was explored in depth, including direct modification methods, surface grafting modification methods based on free radical polymerization and physical activation. The adsorption principles of nanocellulose-based adsorbents when removing heavy metals are analyzed in detail. This review may further facilitate the application of the modified nanocellulose in the field of heavy metal removal.

Modified magnetic chitosan materials for heavy metal adsorption: a review

Magnetic chitosan materials have the characteristics of both chitosan and magnetic particle nuclei, showing the characteristics of easy separation and recovery, strong adsorption capacity and high mechanical strength, and have received extensive attention in adsorption, especially in the treatment of heavy metal ions. In order to further improve its performance, many studies have modified magnetic chitosan materials. This review discusses the strategies for the preparation of magnetic chitosan using coprecipitation, crosslinking, and other methods in detail. Besides, this review mainly summarizes the application of modified magnetic chitosan materials in the removal of heavy metal ions in wastewater in recent years. Finally, this review also discusses the adsorption mechanism, and puts forward the prospect of the future development of magnetic chitosan in wastewater treatment.

Chitosan modifications for adsorption of pollutants - A review

In recent times, research interest into the development of biodegradable, cost-effective and environmental friendly adsorbents with favourable properties for adsorption of pollutants is a challenge. Modification of chitosan via different physical and chemical methods have gained attention as a promising approach for removing organic (such as dyes and pharmaceuticals) and inorganic (such as metal/metal ions) pollutants from aqueous medium. In this regard, researchers have reported grafting and cross-linking approach among others as a potentially useful method for chitosan's modification for improved adsorption efficiency with respect to pollutant uptake. This article reviews the trend in chitosan modification, with regards to the summary of some recently published works on modification of chitosan and their adsorption application in pollutants (metal ion, dyes and pharmaceuticals) removal from aqueous medium. The review uniquely highlights some common cross-linkers and grafting procedures for chitosan modification, their influence on structure and adsorption capacity of modified-chitosan with respect to pollutants removal. Findings revealed that the performance of modified chitosan for adsorption of pollutants depends largely on the modification method adopted, materials used for the modification and adsorption experimental conditions. Cross-linking is commonly utilized for improving the chemical and mechanical stabilities of chitosan but usually decreases adsorption capacity of chitosan/modified-chitosan for adsorption of pollutants. However, literature survey revealed that adsorption capacity of cross-linked chitosan based materials have been enhanced in recently published works either by grafting, incorporation of solid adsorbents (e.g metals, clays and activated carbon) or combination of both prior to cross-linking.

Adsorption of sulfamethoxazole and sulfadiazine on phosphorus-containing stalk cellulose under different water pH studied by quantitative evaluation

To improve the high-value application of corn stalk, phosphorus-containing stalk cellulose (PFC) was prepared, characterized, and utilized for the adsorption of sulfamethoxazole (SMZ) and sulfadiazine (SD), with maximum adsorption capacities of 1.385 and 2.527 mg/g at pH 7. As expected, the adsorption efficiency of PFC was strongly affected by pH, and the preferential adsorption order of SMZ^- (SD⁰) > SMZ⁰ (SD^-) > SMZ⁺ (SD⁺) was obtained from the experimental results and due to the charges of PFC and the SMZ and SD species. Furthermore, these results were qualitatively linked to the adsorption mechanism, e.g., π⁺-π electron donor-acceptor (EDA), anion-π bond electrostatic, and hydrophobic interactions. In particular, the adsorption mechanism was further characterized in terms of structure and analyzed systematically using density functional theory (DFT), frontier orbital theory (FOT), and molecular dynamics (MD) simulation, with the aim to explain the theoretical calculation and experimental results. As a result, the highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) orbitals revealed the key role of the rings and functional groups of PFC and SMZ (or SD) and validated the optimized structures of PFC⁺ sulfonamides (SAs)⁺, PFC^- SAs⁰, and PFC^- SAs^-, in which their binding energy values, energy gaps, and relevant molecular lengths determined their stability. Additionally, the van der Waals (vdW) energy confirmed the effect of various interactions on adsorption.

Adsorption Thermodynamics and Kinetics of Resin for Metal Impurities in Bis(2-hydroxyethyl) Terephthalate

Adsorption of heavy metals from degraded of Polyethylene terephthalate (PET) products by strong cation exchange resin AmberliteIR-120 under optimized conditions toward the selectivity removal of metals are in the following order: Al³⁺ > Zn²⁺ > Mg²⁺ > Fe²⁺ > Ni²⁺. Therefore, kinetic and adsorption isotherm models were applied for fitting experimental data. Comparatively, adsorption isotherm study revealed that Langmuir isotherm model better fits adsorption on surface of resin over than the Freundlich model. In summary, AmberliteIR-120 strong acid cation exchange resin can be used as an efficient adsorbent for heavy metals removal from depolymerized products bis(2-hydroxyethyl) terephthalate.