Animal Models for Heart Valve Research and Development

Gross morphology and morphometry of native and decellularized heart valves of caprine: A comparative study

The gross morphological examination of native caprine heart valves revealed distinctive structural characteristics of the caprine's cardiac anatomy. Four primary orifices were identified, each protected by thin, valve-like structures. Atrioventricular orifices featured tricuspid and bicuspid valves, while the aorta and pulmonary arteries were guarded by semilunar valves. Within the atrioventricular apparatus, distinct features were observed including the tricuspid valve's three leaflets and the bicuspid valve's anterior and posterior leaflets. Ultrasonography provided insights into valve thickness and chordae tendineae lengths. Morphometric studies compared leaflets/cusps within individual native valves, showcasing significant variations in dimensions. Comparative analysis between native and decellularized valves highlighted the effects of decellularization on leaflet thickness and chordae tendineae lengths. Decellularized valves exhibited reduced dimensions compared to native valves, indicating successful removal of cellular components. While some dimensions remained unchanged post-decellularization, significant reductions were observed in leaflet thicknesses and chordae tendineae lengths. Notably, semilunar valve cusps displayed varying responses to decellularization, with significant reductions in cusp lengths observed in the aortic valve, while the pulmonary valve exhibited more subtle changes. These findings underscore the importance of understanding structural alterations in heart valves post-decellularization, providing valuable insights for tissue engineering applications and regenerative medicine.

Design and Analysis of a Polymeric Left Ventricular Simulator via Computational Modelling

Preclinical testing of medical devices is an essential step in the product life cycle, whereas testing of cardiovascular implants requires specialised testbeds or numerical simulations using computer software Ansys 2016. Existing test setups used to evaluate physiological scenarios and test cardiac implants such as mock circulatory systems or isolated beating heart platforms are driven by sophisticated hardware which comes at a high cost or raises ethical concerns. On the other hand, computational methods used to simulate blood flow in the cardiovascular system may be simplified or computationally expensive. Therefore, there is a need for low-cost, relatively simple and efficient test beds that can provide realistic conditions to simulate physiological scenarios and evaluate cardiovascular devices. In this study, the concept design of a novel left ventricular simulator made of latex rubber and actuated by pneumatic artificial muscles is presented. The designed left ventricular simulator is geometrically similar to a native left ventricle, whereas the basal diameter and long axis length are within an anatomical range. Finite element simulations evaluating left ventricular twisting and shortening predicted that the designed left ventricular simulator rotates approximately 17 degrees at the apex and the long axis shortens around 11 mm. Experimental results showed that the twist angle is 18 degrees and the left ventricular simulator shortens 5 mm. Twist angles and long axis shortening as in a native left ventricle show it is capable of functioning like a native left ventricle and simulating a variety of scenarios, and therefore has the potential to be used as a test platform.

Early Feasibility Study of a Hybrid Tissue-Engineered Mitral Valve in an Ovine Model

Tissue engineering aims to overcome the current limitations of heart valves by providing a viable alternative using living tissue. Nevertheless, the valves constructed from either decellularized xenogeneic or purely biologic scaffolds are unable to withstand the hemodynamic loads, particularly in the left ventricle. To address this, we have been developing a hybrid tissue-engineered heart valve (H-TEHV) concept consisting of a nondegradable elastomeric scaffold enclosed in a valve-like living tissue constructed from autologous cells. We developed a 21 mm mitral valve scaffold for implantation in an ovine model. Smooth muscle cells/fibroblasts and endothelial cells were extracted, isolated, and expanded from the animal's jugular vein. Next, the scaffold underwent a sequential coating with the sorted cells mixed with collagen type I. The resulting H-TEHV was then implanted into the mitral position of the same sheep through open-heart surgery. Echocardiography scans following the procedure revealed an acceptable valve performance, with no signs of regurgitation. The valve orifice area, measured by planimetry, was 2.9 cm2, the ejection fraction reached 67%, and the mean transmitral pressure gradient was measured at 8.39 mmHg. The animal successfully recovered from anesthesia and was transferred to the vivarium. Upon autopsy, the examination confirmed the integrity of the H-TEHV, with no evidence of tissue dehiscence. The preliminary results from the animal implantation suggest the feasibility of the H-TEHV.

Strengthened Decellularized Porcine Valves via Polyvinyl Alcohol as a Template Improving Processability

The heart valve is crucial for the human body, which directly affects the efficiency of blood transport and the normal functioning of all organs. Generally, decellularization is one method of tissue-engineered heart valve (TEHV), which can deteriorate the mechanical properties and eliminate allograft immunogenicity. In this study, removable polyvinyl alcohol (PVA) is used to encapsulate decellularized porcine heart valves (DHVs) as a dynamic template to improve the processability of DHVs, such as suturing. Mechanical tests show that the strength and elastic modulus of DHVs treated with different concentrations of PVA significantly improve. Without the PVA layer, the valve would shift during suture puncture and not achieve the desired suture result. The in vitro results indicate that decellularized valves treated with PVA can sustain the adhesion and growth of human umbilical vein endothelial cells (HUVECs). All results above show that the DHVs treated with water-soluble PVA have good mechanical properties and cytocompatibility to ensure post-treatment. On this basis, the improved processability of DHV treated with PVA enables a new paradigm for the manufacturing of scaffolds, making it easy to apply.

Developmental Toxicity Studies: The Path towards Humanized 3D Stem Cell-Based Models

Today, it is recognized that medicines will eventually be needed during pregnancy to help prevent to, ameliorate or treat an illness, either due to gestation-related medical conditions or pre-existing diseases. Adding to that, the rate of drug prescription to pregnant women has increased over the past few years, in accordance with the increasing trend to postpone childbirth to a later age. However, in spite of these trends, information regarding teratogenic risk in humans is often missing for most of the purchased drugs. So far, animal models have been the gold standard to obtain teratogenic data, but inter-species differences have limited the suitability of those models to predict human-specific outcomes, contributing to misidentified human teratogenicity. Therefore, the development of physiologically relevant in vitro humanized models can be the key to surpassing this limitation. In this context, this review describes the pathway towards the introduction of human pluripotent stem cell-derived models in developmental toxicity studies. Moreover, as an illustration of their relevance, a particular emphasis will be placed on those models that recapitulate two very important early developmental stages, namely gastrulation and cardiac specification.

Preclinical Large Animal In-Vivo Experiments for Surgically Implanted Atrioventricular Valve: Reappraisal and Systematic Review

BACKGROUND

The development of atrioventricular bioprosthesis has witnessed an increasing drive toward clinical translation over the last few decades. A significant challenge in the clinical translation of an atrioventricular bioprosthesis from bench to bedside is the appropriate choice of a large animal model to test the safety and effectiveness of the device.

METHODS

We conducted a systematic review of pre-clinical in vivo studies that would enable us to synthesize a recommended framework. PRISMA (Preferred Reporting Items for Systematic Reviews and MetaAnalyses) guidelines were followed to identify and extract relevant articles.

RESULTS

Sheep was the most common choice of animal, with nine out of the 12 included studies being conducted on sheep. There were acute and chronic studies based on our search criteria. An average of ~20 and 5 animals were used for chronic and acute studies. One out of three acute studies and eight out of nine chronic studies were on stented heart valve bioprosthesis. All analyses were conducted on the implantation of atrioventricular valves with trileaflet, except for one chronic study on unileaflet valves and one chronic and acute study on bileaflet valves.

CONCLUSION

Understanding the variance in past pre-clinical study designs may increase the appropriate utilization of large animal models. This synthesized evidence provides a pre-clinical in vivo studies framework for future research on an atrioventricular bioprosthesis.

Animal models and animal-free innovations for cardiovascular research: current status and routes to be explored. Consensus document of the ESC Working Group on Myocardial Function and the ESC Working Group on Cellular Biology of the Heart

Cardiovascular diseases represent a major cause of morbidity and mortality, necessitating research to improve diagnostics, and to discover and test novel preventive and curative therapies, all of which warrant experimental models that recapitulate human disease. The translation of basic science results to clinical practice is a challenging task, in particular for complex conditions such as cardiovascular diseases, which often result from multiple risk factors and comorbidities. This difficulty might lead some individuals to question the value of animal research, citing the translational 'valley of death', which largely reflects the fact that studies in rodents are difficult to translate to humans. This is also influenced by the fact that new, human-derived in vitro models can recapitulate aspects of disease processes. However, it would be a mistake to think that animal models do not represent a vital step in the translational pathway as they do provide important pathophysiological insights into disease mechanisms particularly on an organ and systemic level. While stem cell-derived human models have the potential to become key in testing toxicity and effectiveness of new drugs, we need to be realistic, and carefully validate all new human-like disease models. In this position paper, we highlight recent advances in trying to reduce the number of animals for cardiovascular research ranging from stem cell-derived models to in situ modelling of heart properties, bioinformatic models based on large datasets, and state-of-the-art animal models, which show clinically relevant characteristics observed in patients with a cardiovascular disease. We aim to provide a guide to help researchers in their experimental design to translate bench findings to clinical routine taking the replacement, reduction, and refinement (3R) as a guiding concept.

Effect of Blood Flow on Cardiac Morphogenesis and Formation of Congenital Heart Defects

Congenital heart disease (CHD) affects about 1 in 100 newborns and its causes are multifactorial. In the embryo, blood flow within the heart and vasculature is essential for proper heart development, with abnormal blood flow leading to CHD. Here, we discuss how blood flow (hemodynamics) affects heart development from embryonic to fetal stages, and how abnormal blood flow solely can lead to CHD. We emphasize studies performed using avian models of heart development, because those models allow for hemodynamic interventions, in vivo imaging, and follow up, while they closely recapitulate heart defects observed in humans. We conclude with recommendations on investigations that must be performed to bridge the gaps in understanding how blood flow alone, or together with other factors, contributes to CHD.

Characterization of main pulmonary artery and valve annulus region of piglets using echocardiography, uniaxial tensile testing, and a novel non-destructive technique

Characterization of cardiovascular tissue geometry and mechanical properties of large animal models is essential when developing cardiovascular devices such as heart valve replacements. These datasets are especially critical when designing devices for pediatric patient populations, as there is often limited data for guidance. Here, we present a previously unavailable dataset capturing anatomical measurements and mechanical properties of juvenile Yorkshire (YO) and Yucatan (YU) porcine main pulmonary artery (PA) and pulmonary valve (PV) tissue regions that will inform pediatric heart valve design requirements for preclinical animal studies. In addition, we developed a novel radial balloon catheter-based method to measure tissue stiffness and validated it against a traditional uniaxial tensile testing method. YU piglets, which were significantly lower weight than YO counterparts despite similar age, had smaller PA and PV diameters (7.6–9.9 mm vs. 10.1–12.8 mm). Young’s modulus (stiffness) was measured for the PA and the PV region using both the radial and uniaxial testing methods. There was no significant difference between the two breeds for Young’s modulus measured in the elastic (YU PA 84.7 ± 37.3 kPa, YO PA 79.3 ± 15.7 kPa) and fibrous regimes (YU PA 308.6 ± 59.4 kPa, YO PA 355.7 ± 68.9 kPa) of the stress-strain curves. The two testing techniques also produced similar stiffness measurements for the PA and PV region, although PV data showed greater variation between techniques. Overall, YU and YO piglets had similar PA and PV diameters and tissue stiffness to previously reported infant pediatric patients. These results provide a previously unavailable age-specific juvenile porcine tissue geometry and stiffness dataset critical to the development of pediatric cardiovascular prostheses. Additionally, the data demonstrates the efficacy of a novel balloon catheter-based technique that could be adapted to non-destructively measure tissue stiffness in situ.

Models and Techniques to Study Aortic Valve Calcification in Vitro, ex Vivo and in Vivo. An Overview

Aortic valve stenosis secondary to aortic valve calcification is the most common valve disease in the Western world. Calcification is a result of pathological proliferation and osteogenic differentiation of resident valve interstitial cells. To develop non-surgical treatments, the molecular and cellular mechanisms of pathological calcification must be revealed. In the current overview, we present methods for evaluation of calcification in different ex vivo, in vitro and in vivo situations including imaging in patients. The latter include echocardiography, scanning with computed tomography and magnetic resonance imaging. Particular emphasis is on translational studies of calcific aortic valve stenosis with a special focus on cell culture using human primary cell cultures. Such models are widely used and suitable for screening of drugs against calcification. Animal models are presented, but there is no animal model that faithfully mimics human calcific aortic valve disease. A model of experimentally induced calcification in whole porcine aortic valve leaflets ex vivo is also included. Finally, miscellaneous methods and aspects of aortic valve calcification, such as, for instance, biomarkers are presented.

Models of immunogenicity in preclinical assessment of tissue engineered heart valves

Tissue engineered heart valves may one day offer an exciting alternative to traditional valve prostheses. Methods of construction vary, from decellularised animal tissue to synthetic hydrogels, but the goal is the same: the creation of a 'living valve' populated with autologous cells that may persist indefinitely upon implantation. Previous failed attempts in humans have highlighted the difficulty in predicting how a novel heart valve will perform in vivo. A significant hurdle in bringing these prostheses to market is understanding the immune reaction in the short and long term. With respect to innate immunity, the chronic remodelling of a tissue engineered implant by macrophages remains poorly understood. Also unclear are the mechanisms behind unknown antigens and their effect on the adaptive immune system. No silver bullet exists, rather researchers must draw upon a number of in vitro and in vivo models to fully elucidate the effect a host will exert on the graft. This review details the methods by which the immunogenicity of tissue engineered heart valves may be investigated and reveals areas that would benefit from more research. STATEMENT OF SIGNIFICANCE: Both academic and private institutions around the world are committed to the creation of a valve prosthesis that will perform safely upon implantation. To date, however, no truly non-immunogenic valves have emerged. This review highlights the importance of preclinical immunogenicity assessment, and summarizes the available techniques used in vitro and in vivo to elucidate the immune response. To the authors knowledge, this is the first review that details the immune testing regimen specific to a TEHV candidate.

Comparison of Serotonin-Regulated Calcific Processes in Aortic and Mitral Valvular Interstitial Cells

Calcification is an important pathological process and a common complication of degenerative valvular heart diseases, with higher incidence in aortic versus mitral valves. Two phenotypes of valvular interstitial cells (VICs), activated VICs and osteoblastic VICs (obVICs), synergistically orchestrate this pathology. It has been demonstrated that serotonin is involved in early stages of myxomatous mitral degeneration, whereas the role of serotonin in calcific aortic valve disease is still unknown. To uncover the link between serotonin and osteogenesis in heart valves, osteogenesis of aortic and mitral VICs was induced in vitro. Actin polymerization and serotonin signaling were inhibited using cytochalasin D and serotonin inhibitors, respectively, to investigate the role of cell activation and serotonin signals in valvular cell osteogenesis. To evaluate calcification progress, calcium and collagen deposits along with the expression of protein markers, including the rate-limiting enzyme of serotonin synthesis [tryptophan hydroxylase 1 (TPH1)], were assessed. When exposed to osteogenic culture conditions and grown on soft surfaces, passage zero aortic VICs increased extracellular collagen deposits and obVIC phenotype markers. A more intense osteogenic process was observed in aortic VICs of higher passages, where cells were activated prior to osteogenic induction. For both, TPH1 expression was upregulated as osteogenesis advanced. However, these osteogenic changes were reversed upon serotonin inhibition. This discovery provides a better understanding of signaling pathways regulating VIC phenotype transformation and explains different manifestations of degenerative pathologies. In addition, the discovery of serotonin-based inhibition of valvular calcification will contribute to the development of potential novel therapies for calcific valvular diseases.

Transcatheter Heart Valves: A Biomaterials Perspective

Heart valve disease is prevalent throughout the world, and the number of heart valve replacements is expected to increase rapidly in the coming years. Transcatheter heart valve replacement (THVR) provides a safe and minimally invasive means for heart valve replacement in high-risk patients. The latest clinical data demonstrates that THVR is a practical solution for low-risk patients. Despite these promising results, there is no long-term (>20 years) durability data on transcatheter heart valves (THVs), raising concerns about material degeneration and long-term performance. This review presents a detailed account of the materials development for THVRs. It provides a brief overview of THVR, the native valve properties, the criteria for an ideal THV, and how these devices are tested. A comprehensive review of materials and their applications in THVR, including how these materials are fabricated, prepared, and assembled into THVs is presented, followed by a discussion of current and future THVR biomaterial trends. The field of THVR is proliferating, and this review serves as a guide for understanding the development of THVs from a materials science and engineering perspective.

Can a self-expanding pediatric stent expand with an artery? Relationship of stent design to vascular biology

OBJECTIVES

A large-diameter, intravascular, self-expanding stent system capable of continued expansion during somatic and vascular growth was modeled with finite element analysis (FEA), manufactured and tested in an animal model.

BACKGROUND

Children can quickly outgrow intravascular stents. If a stent could expand after implantation in arteries this would be ideal for use in pediatric patients.

METHODS

Computer-aided design and FEA were used to design and manufacture large-diameter, self-expanding nitinol stents with both high and low chronic outward force (COF). Four distinct stents with similar designs but with variable lengths and strut thicknesses were manufactured. Fourteen of these stents were implanted in the abdominal aortas or iliac arteries of four juvenile swine.

RESULTS

All animals survived without complication to their designated time points of harvest (90 or 180-days), and all stents expanded to greater diameters than the adjacent non-stented artery. Luminal diameter growth was 34-49% and 20-23% for stented and non-stented segments, respectively. Histologic examination revealed variable degrees of the internal elastic lamina and/or medial disruption with a mean injury score ranging from 0.70 ± 0.56 to 1.23 ± 0.21 and low COF stents implanted in smaller arteries having a larger injury score. Inflammatory responses and stenosis formation were minimal and ranged from 0.50 ± 0.71 to 3.00 ± 0.00 and 5.52 ± 1.05% to 14.68 ± 9.12%, respectively. The stent's COF did not correlate with vessel expansion or vascular injury.

CONCLUSIONS

Self-expanding stents can mirror and even exceed somatic growth. Although longer-term testing is needed, it may be possible to custom tailor self-expanding stents to expand after arterial implantation in pediatric patients.

Optical coherence tomography and multiphoton microscopy offer new options for the quantification of fibrotic aortic valve disease in ApoE-/- mice

Aortic valve sclerosis is characterized as the thickening of the aortic valve without obstruction of the left ventricular outflow. It has a prevalence of 30% in people over 65 years old. Aortic valve sclerosis represents a cardiovascular risk marker because it may progress to moderate or severe aortic valve stenosis. Thus, the early recognition and management of aortic valve sclerosis are of cardinal importance. We examined the aortic valve geometry and structure from healthy C57Bl6 wild type and age-matched hyperlipidemic ApoE-/- mice with aortic valve sclerosis using optical coherence tomography (OCT) and multiphoton microscopy (MPM) and compared results with histological analyses. Early fibrotic thickening, especially in the tip region of the native aortic valve leaflets from the ApoE-/- mice, was detectable in a precise spatial resolution using OCT. Evaluation of the second harmonic generation signal using MPM demonstrated that collagen content decreased in all aortic valve leaflet regions in the ApoE-/- mice. Lipid droplets and cholesterol crystals were detected using coherent anti-Stokes Raman scattering in the tissue from the ApoE-/- mice. Here, we demonstrated that OCT and MPM, which are fast and precise contactless imaging approaches, are suitable for defining early morphological and structural alterations of sclerotic murine aortic valves.

Computed Tomography-based evaluation of porcine cardiac dimensions to assist in pre-study planning and optimized model selection for pre-clinical research

The pig (Sus Scrofa Domestica) is an accepted model for preclinical evaluation of prosthetic heart valves and trans-catheter implantation techniques. Understanding porcine cardiac dimensions through three-dimensional computed tomography (CT), increases preclinical study success, leading to higher cost efficiency and to the observance of the obligation to the 3 R principles. Cardiac CT images of twenty-four Swiss large white pigs were segmented; aortic root, mitral valve, pulmonary trunk, tricuspid valve, as well as the aorto-mitral angle and left atrial height were analyzed. Correlation coefficient (r) was calculated in relation to body weight. In Swiss large white pigs, valvular dimensions, length of the pulmonary artery and ascending aorta as well as left atrial height correlate with body weight. Coronary ostia heights and aorto-mitral angle size can be neglected in animal size selection; no changes were found for either of the two parameters with increasing body weight.

TGF-β Signaling Promotes Tissue Formation during Cardiac Valve Regeneration in Adult Zebrafish

Cardiac valve disease can lead to severe cardiac dysfunction and is thus a frequent cause of morbidity and mortality. Its main treatment is valve replacement, which is currently greatly limited by the poor recellularization and tissue formation potential of the implanted valves. As we still lack suitable animal models to identify modulators of these processes, here we used adult zebrafish and found that, upon valve decellularization, they initiate a rapid regenerative program that leads to the formation of new functional valves. After injury, endothelial and kidney marrow-derived cells undergo cell cycle re-entry and differentiate into new extracellular matrix-secreting valve cells. The TGF-β signaling pathway promotes the regenerative process by enhancing progenitor cell proliferation as well as valve cell differentiation. These findings reveal a key role for TGF-β signaling in cardiac valve regeneration and establish the zebrafish as a model to identify and test factors promoting cardiac valve recellularization and growth.