Physical characterization of unfilled and nanofilled dental resins: Static versus dynamic mechanical properties

Urchin-like multiscale structured fluorinated hydroxyapatite as versatile filler for caries restoration dental resin composites

Caries is one of the most prevalent human diseases, resulting from demineralization of tooth hard tissue caused by acids produced from bacteria, and can progress to pulpal inflammation. Filling restoration with dental resin composites (DRCs) is currently the most common treatment for caries. However, existing DRCs suffer from low fracture strength and lack comprehensive anti-caries bioactivity including remineralization, pulp protection, and anti-cariogenic bacteria effects. In this study, inspired by plant roots' ability to stabilize and improve soil, fluorinated urchin-like hydroxyapatite (FUHA) with a three-dimensional whisker structure and bioactive components of calcium, phosphorus, and fluorine was designed and synthesized by a dynamic self-assembly method. Furthermore, versatile FUHA particles with different loading fractions were used as functional fillers to fabricate methacrylate-based DRCs, where the urchin-like hydroxyapatite (UHA) filled DRCs and commercial DRCs (Z350XT and BEAUTIFIL II) served as the control groups. The results demonstrated that FUHA with 50 wt% loading in resin matrix endowed DRC (F5) with excellent physicochemical properties, dentin remineralization property, cell viability, promotion of dental pulp stem cells mineralization, and antibacterial properties. Meanwhile, F5 also presented good clinical handling and aesthetic characteristics. Therefore, structure/functional-integrated FUHA filled DRCs have potential as a promising strategy for tooth restoration and anti-caries bioactivity.

Effects of silica surface modification with silane and poly(ethylene glycol) on flexural strength, protein-repellent, and antibacterial properties of acrylic dental nanocomposites

OBJECTIVE

The main aim of the current work was to develop dental acrylic-based composites with protein-repellent and antibacterial properties by using surface-modified silica nanoparticles. The effects of surface modification of silica nanoparticles in protein-repellent and antibacterial activity and mechanical properties of dental composites including flexural strength, flexural modulus, and hardness were discussed.

METHODS

The surface of silica nanoparticles was first chemically treated with 3-methacryloxypropyltrimethoxysilane (MPS) as a coupling agent and then with poly(ethylene glycol) (PEG) bonded to MPS. Dental acrylic-based composites were prepared with mass fractions of 10, 15, 20, 30, and 40 % of PEG-modified MPS-silica nanoparticles (PMS). The chemical surface modification of silica nanoparticles with MPS and PEG was confirmed by Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA).

RESULTS

The dental composite containing 20 wt% PMS nanoparticles could reduce the protein adsorption by 28 % as compared with a composite containing 20 wt% MPS-modified silica. The antibacterial test indicated that the PMS nanoparticles can significantly reduce the adhesion of Streptococcus mutans and the biofilm formation on the surface of dental composites. It was found that the flexural strength increased by increasing the PMS nanoparticles from 0 to 20 wt% and then decreased by the incorporation of higher percentages of these nanoparticles. Also, with increasing the weight percentage of PMS nanoparticles, the elastic and the flexural modulus and the hardness of resin nanocomposites were increased.

SIGNIFICANCE

In the current work, for the first time, dental resin composites containing PEG were prepared with excellent protein-repellent and antibacterial properties.

Novel 1,2-Bismethacrylate-3-Eugenyl Propane for Resin Composites: Synthesis, Characterization, Rheological, and Degree of Conversion

This work aimed to synthesize a novel dimethacrylated-derivative of eugenol (Eg) (termed EgGAA) as potential biomaterial for certain applications such as dental fillings and adhesives. EgGAA was synthesized through a two-step reaction: (i) a mono methacrylated-eugenol (EgGMA) was produced via a ring-opening etherification of glycidyl methacrylate (GMA) with Eg; (ii) EgGMA was condensed with methacryloyl chloride into EgGAA. EgGAA was further incorporated in matrices containing BisGMA and TEGDMA (50:50 wt%) (TBEa), in which EgGAA replaced BisGMA as 0–100 wt% to get a series of unfilled resin composites (TBEa0–TBEa100), and by addition of reinforcing silica (66 wt%), a series of filled resins were also obtained (F-TBEa0–F-TBEa100). Synthesized monomers were analyzed for their structural, spectral, and thermal properties using FTIR, 1H- and 13C-NMR, mass spectrometry, TGA, and DSC. Composites rheological and DC were analyzed. The viscosity (η, Pa·s) of EgGAA (0.379) was 1533 times lower than BisGMA (581.0) and 125 times higher than TEGDMA (0.003). Rheology of unfilled resins (TBEa) indicated Newtonian fluids, with viscosity decreased from 0.164 Pa·s (TBEa0) to 0.010 Pa·s (TBEa100) when EgGAA totally replaced BisGMA. However, composites showed non-Newtonian and shear-thinning behavior, with complex viscosity (η*) being shear-independent at high angular frequencies (10–100 rad/s). The loss factor crossover points were at 45.6, 20.3, 20.4, and 25.6 rad/s, indicating a higher elastic portion for EgGAA-free composite. The DC was insignificantly decreased from 61.22% for the control to 59.85% and 59.50% for F-TBEa25 and F-TBEa50, respectively, while the difference became significant when EgGAA totally replaced BisGMA (F-TBEa100, DC = 52.54%). Accordingly, these properties could encourage further investigation of Eg-containing resin-based composite as filling materials in terms of their physicochemical, mechanical, and biological potentiality as dental material.

Mechanical Properties of Experimental Composites with Different Photoinitiator

Objective  The effect of different photoinitiators on mechanical properties of experimental composites was evaluated.

Materials and Methods  Resin composites were formulated by using a blend of bisphenol A-glycidyl and triethylene glycol (50/50 wt%) dimethacrylate monomers, and 65 wt% of barium aluminium silicate and silica filler particles. Photoinitiators used were 0.2% camphorquinone (CQ) and 0.8% co-initiator (DMAEMA); 0.2% phenyl-propanedione and 0.8% DMAEMA; 0.1% CQ + 0.1% phenyl propanedione and 0.8% DMAEMA; 0.42% mono(acyl)phosphine oxide (MAPO); and 0.5% bis(acyl)phosphine oxide (BAPO). Specimens ( n = 10) were light cured by using a multiple-emission peak light-emitting diode for 20 seconds at 1,200 mW/cm ² of irradiance and Knoop hardness and plasticization, depth of cure, flexural strength, and elastic modulus were evaluated. Data were statiscally analyzed at significance level of α = 5%.

Results  Experimental composites containing MAPO and BAPO photoinitiators showed the highest values of flexural strength, elastic modulus, top surface hardness, and lower hardness reduction caused by alcohol compared with CQ. Composites containing CQ and PPD showed similar results, except for depth of cure and hardness of bottom surface.

Conclusion  BAPO and MAPO showed higher flexural strength, elastic modulus, hardness on top surface, and lower polymer plasticization to CQ.

Modified POSS nano-structures as novel co-initiator-crosslinker: Synthesis and characterization

OBJECTIVE

To synthesize an amine-modified polyhedral oligomeric silsesquioxane (POSS) nano-structure as a novel co-initiator-crosslinker (co-Ini-Linker) and to determine the effect of the co-Ini-linker on the physical and mechanical behavior of an experimental dental composite.

METHODS

The amine-methacrylate POSS nano-structures (AMA-POSS) were chemically synthesized by anchoring a tertiary amine functionality on the methacrylate POSS (MA-POSS) branches. Three types of AMA-POSS, having different amine branches in their structures, were synthesized through the Aza Michael reaction. The chemical structure of AMA-POSSs were evaluated by¹H-NMR spectroscopy. Afterward, the AMA-POSS was incorporated into a dental resin system composed of Bis-GMA, TEGDMA, and photo-initiator. Three resin systems with different AMA-POSS types were then prepared, and their properties were compared with a resin containing DMAEMA as a conventional co-initiator. The degree of conversion evaluated by FTIR spectroscopy and the shrinkage kinetics of the resins were determined through the bonded-disk technique. The flexural properties of the photopolymerized resins were also investigated. The distribution of nano-structures in the matrix resin was analyzed using EDX analysis.

RESULTS

The modified POSS structure and the number of amine branches were confirmed with¹H-NMR spectroscopy. The resin containing 8 amine branches (P8) showed the same degree of conversion (DC%) as the resin containing DMAEMA (P > 0.05). Decreasing the amine branches in the POSS structure, however, revealed an increasing trend in DC%. The resin containing P8 showed the lowest shrinkage strain. By incorporating AMA-POSS into the resin system, the water sorption significantly decreased (P < 0.05). The flexural strength and modulus increased by adding P3 into the resin system (P < 0.05). EDX Si-map revealed that the co-Ini-linker was well dispersed in the resin matrix.

SIGNIFICANCE

The synthesized novel amine-methacrylate POSS nanostructures not only act as an amine co-initiator but also work as a reinforcing filler and a cross-linking agent.

Mechanical Properties of Nanohybrid Resin Composites Containing Various Mass Fractions of Modified Zirconia Particles

PURPOSE

The aim of this study was to investigate the effect of various mass fractions of 10-methacry-loyloxydecyl dihydrogen phosphate (MDP)-conditioned or unconditioned zirconia nano- or micro-particles with different initiator systems on the mechanical properties of nanohybrid resin composites.

METHODS

Both light-cured (L) and dual-cured (D) resin composites were prepared. When the mass fraction of the nano- or micro-zirconia fillers reached 55 wt%, resin composites were equipped with dual-cured initiator systems. We measured the three-point bending-strength, elastic modulus, Weibull modulus and translucency parameter of the nanohybrid resin composites containing various mass fractions of MDP-conditioned or unconditioned zirconia nano- or micro-particles (0%, 5 wt%, 10 wt%, 20 wt%, 30 wt% and 55 wt%). A Cell Counting Kit (CCK)-8 was used to test the cell cytotoxicity of the experimental resin composites. The zirconia nano- or micro-particles with MDP-conditioning or not were characterized by transmission electron microscopy (TEM), Fourier infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS).

RESULTS

Resin composites containing 5-20 wt% MDP-conditioned or unconditioned nano-zirconia fillers exhibited better three-point bending-strength than the control group without zirconia fillers. Nano- or micro-zirconia fillers decreased the translucence of the nanohybrid resin composites. According to the cytotoxicity classification, all of the nano- or micro-zirconia fillers containing experimental resin composites were considered to have no significant cell cytotoxicity. The FTIR spectra of the conditioned nano- or micro-fillers showed new absorption bands at 1719 cm-1 and 1637 cm-1, indicating the successful combination of MDP and zirconia particles. The XPS analysis measured Zr-O-P peak area on MDP-conditioned nano- and micro-zirconia fillers at 39.91% and 34.89%, respectively.

CONCLUSION

Nano-zirconia filler improved the mechanical properties of nanohybrid resin composites, but cannot be the main filler to replace silica filler. The experimental dual-cured composites can be resin cements with better opacity effects and a low viscosity.

Recent advances in chemical surface modification of metal oxide nanoparticles with silane coupling agents: A review

Nowadays, metal oxide nanoparticles (NPs) have been applied in various fields of nanotechnology including catalysis of chemical reactions, drug delivery, water treatment, textile industries, polymer composites, adhesives, and coatings. The greatest challenge in relation to metal oxide NPs is high tendency to aggregation. Chemical surface modification of metal oxide NPs has gained widely interest to control of dispersion and aggregation of NPs. Silane modifiers are one of the most important bifunctional modifiers that are frequently used for surface treatment of metal oxide NPs. In this review paper, we first focus on the synthesis, surface thermodynamic properties, surface modification techniques, and kinetic of silanization reaction of metal oxide NPs. Then, the recent development in using silane modifiers for treatment of metal oxide NPs in various applications were investigated. It was found that the unmodified NPs have high surface energy and are thermodynamically unstable. The thermodynamic properties of NPs including G_m^s, H_m^s, and S_m^sincrease with decreasing the particle size. Aggregation phenomena is the simple way to reduce the excess surface energy of NPs that leads to an increase in particle size. Therefore, the chemical surface modification of NPs using silane modifiers can be used as an effective method for the prevention of NPs agglomeration and improvement of NPs stability.

Synthesis and characterization of core-shell nanoparticles and their application in dental resins

The aim of this study was to synthesize acrylic core-shell particles and silica-loaded core-shell hybrid particles through emulsion polymerization. Also this work examined the influence of synthesized nanoparticles loading in a Bis-GMA/TEGDMA resin matrix on some mechanical properties of the dental composite resins. Core-shell particles consisting of polybutyl acrylate (PBA) rubbery core and polymethyl methacrylate (PMMA)/polystyrene (PS) shell were synthesized by seeded emulsion polymerization. For preparing the core-shell hybrid particles, first silica particles with diameters of about 68 nm were synthesized based on the Stöber process. Then the surface of silica particles was treated with ɣ-MPS. Afterwards, polymeric shell was coated on silica nanoparticles through emulsion polymerization. The morphology of core-shell particles was examined by SEM/TEM. Mechanical properties (fracture toughness, flexural strength and flexural modulus) of the photo-cured Bis-GMA/TEGDMA dental resins/composites filled with different mass fractions of synthesized nanoparticles were tested, and analysis of variance (ANOVA) was used for the statistical analysis of the acquired data. Formation of glassy shell on PBA core in core-shell particles, grafting of ɣ -MPS onto the silica particles and encapsulation of modified silica by polymeric shell in core-shell hybrid particles were confirmed using various analytical techniques. The results of mechanical tests showed that fracture toughness of Bis-GMA/TEGDMA dental resins improved about 35% by the inclusion of 5 wt% silica-loaded core-shell hybrid particles with little effect on flexural strength. This study shows that incorporation of proper amount of hybrid core-shell particles in dental composites can improve their fracture toughness and thus may extend their service life.

Dual modified nanosilica particles as reinforcing fillers for dental adhesives: Synthesis, characterization, and properties

A facile procedure has been devised to develop a novel dentin bonding system containing poly (acrylic acid)-grafted-silanized fumed silica particles as reinforcing filler, with high stability of nanoparticle dispersion and enhanced bond strength and mechanical properties. In the first step, the silanization of fumed silica nanoparticles was performed in the following conditions: (i) ethanol-water solution with a pH of 5 and (ii) cyclohexane with a pH of 9 using trimethoxysilylpropyl methacrylate (γ-MPS) as a reactive silane coupling agent. FTIR and TGA analyses confirmed the presence of silane in the resultant structure and enhanced dispersion stability of modified particles was proved by a separation analyzer and also zeta potential analyses. In the second step, free radical polymerization of acrylic acid monomers in the presence of silanized nanoparticles was carried out and poly (acrylic acid) -grafted- silanized fumed silica were acquired. The flexural strength and fracture toughness of the adhesive containing 0.2 wt.% of the dual modified filler reached maximum of 70.4 MPa and 1.34 MPa m^1/2, respectively, showing average improvements of 74% and 179%, respectively, in comparison with the adhesive without filler. Flexural modulus values did not significantly change with increasing the filler content except the adhesive containing 5 wt.% having the lowest flexural modulus. The highest microtensile bond strength was also observed at 0.2 wt.% filler content showing the average improvements of 197% as compared with the neat adhesive. Energy dispersive X-ray (EDX) mapping confirmed a homogenous and uniform distribution of the fillers in the adhesive matrix containing 0.2 wt.% and 0.5 wt.% of filler while incorporation of 5 wt.% led to large particle aggregates. SEM images of the fracture surface of the adhesive with different filler contents subjected to fracture toughness test showed rougher surface and longer crack path by increasing filler concentration. The adhesive containing 0.2 wt.% of filler perfectly penetrated into the dentin tubules proved by the SEM micrographs in microtensile bond strength test.

A Guide through the Dental Dimethacrylate Polymer Network Structural Characterization and Interpretation of Physico-Mechanical Properties

Material characterization by the determination of relationships between structure and properties at different scales is essential for contemporary material engineering. This review article provides a summary of such studies on dimethacrylate polymer networks. These polymers serve as photocuring organic matrices in the composite dental restorative materials. The polymer network structure was discussed from the perspective of the following three aspects: the chemical structure, molecular structure (characterized by the degree of conversion and crosslink density (chemical as well as physical)), and supramolecular structure (characterized by the microgel agglomerate dimensions). Instrumental techniques and methodologies currently used for the determination of particular structural parameters were summarized. The influence of those parameters as well as the role of hydrogen bonding on basic mechanical properties of dimethacrylate polymer networks were finally demonstrated. Mechanical strength, modulus of elasticity, hardness, and impact resistance were discussed. The issue of the relationship between chemical structure and water sorption was also addressed.

Dynamic and Static Flexural Appraisal of Resin-based Composites: Comparison of the ISO and Mini-flexural Tests

The objective of this study was to determine the influence of specimen dimension and conditioning medium on the dynamic and static flexural properties of resin-based composites (RBCs). One conventional (Filtek Z350) and two bulk-fill RBCs (Filtek Bulk-fill and Beautifil-Bulk Restorative) were evaluated. Bar-shaped specimens with dimensions 25 × 2 × 2 mm (ISO flexural [IFT]) or 12 × 2 × 2 mm (mini-flexural [MFT]) were fabricated using customized stainless-steel molds, finished, measured, randomly divided into two groups, and conditioned in air or artificial saliva (SAGF) for seven days at 37°C. The specimens (n=10) were then subjected to dynamic and static three-point flexural testing. Data for storage modulus, loss modulus, loss tangent, flexural strength, and modulus were computed and subjected to t-test, analysis of variance/Tukey test, and Pearson correlation at a significance level of α = 0.05. For both IFT and MFT, significant differences in dynamic and static flexural properties were more prevalent between materials after storage in saliva. For both conditioning mediums, the strongest correlation between IFT and MFT was observed for flexural strength. While significant positive correlations were observed for all flexural properties with saliva, no significant correlations were detected for loss tangent and flexural modulus with air. For both IFT and MFT, storage in saliva appeared to be more discriminative than storage in air. As moderate to strong positive relationships exist between IFT and MFT for dynamic and static flexural properties, the mini-flexural test holds promise as a replacement for the ISO 4049 in view of its clinical relevance and greater efficiency.

Mechanical Degradation of Different Classes of Composite Resins Aged in Water, Air, and Oil

A significant deterioration of the properties can drastically compromise the survival rate of restorative materials. The aim of this study was to assess flexural strength and hardness of three composite classes: hybrid composite resin (HCR), nanoparticulate composite resin (NCR), and silorane-based composite resin (SBCR). One hundred specimens were prepared for hardness testing by using a split metallic mold measuring 10 mm in diameter and 2 mm deep. Twenty specimens were prepared for each restorative material, randomly assigned for storage in air, distilled water, or mineral oil. After intervals of 24 hours, 30, 60, 90, and 120 days, hardness and flexural strength tests were initially compared in two levels: "storage medium" and "time" within each material group. A two-way analysis of variance was performed (p<0.05) on the variables "material" and "storage time" (p<0.05). The HCR showed to be stable with regard to the evaluation of flexural strength and hardness (p<0.05). A significant reduction occurs for the NCR in comparison to the other groups (p<0.05). The NCR presented the lowest values of hardness and flexural strength kept on water over time. The characteristics of material showed a strong influence on the decrease of the mechanical properties analyzed.