Composite resin reinforced with silver nanoparticles-laden hydroxyapatite nanowires for dental application

Silver-quercetin-loaded honeycomb-like Ti-based interface combats infection-triggered excessive inflammation via specific bactericidal and macrophage reprogramming

Excessive inflammation caused by bacterial infection is the primary cause of implant failure. Antibiotic treatment often fails to prevent peri-implant infection and may induce unexpected drug resistance. Herein, a non-antibiotic strategy based on the synergy of silver ion release and macrophage reprogramming is proposed for preventing infection and bacteria-induced inflammation suppression by the organic-inorganic hybridization of silver nanoparticle (AgNP) and quercetin (Que) into a polydopamine (PDA)-based coating on the 3D framework of porous titanium (SQPdFT). Once the planktonic bacteria (e.g., Escherichia coli, Staphylococcus aureus) reach the surface of SQPdFT, released Que disrupts the bacterial membrane. Then, AgNP can penetrate the invading bacterium and kill them, which further inhibits the biofilm formation. Simultaneously, released Que can regulate macrophage polarization homeostasis via the peroxisome proliferators-activated receptors gamma (PPARγ)-mediated nuclear factor kappa-B (NF-κB) pathway, thereby terminating excessive inflammatory responses. These advantages facilitate the adhesion and osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs), concomitantly suppressing osteoclast maturation, and eventually conferring superior mechanical stability to SQPdFT within the medullary cavity. In summary, owing to its excellent antibacterial effect, immune remodeling function, and pro-osteointegration ability, SQPdFT is a promising protective coating for titanium-based implants used in orthopedic replacement surgery.

TiO2 nanotubes incorporated into a glaze-coating ceramic: surface roughness, color, and antibiofilm activity

This study evaluated the surface roughness, color change, and antibacterial effect of a ceramic glaze enhanced with TiO2 nanotubes (n-TiO2). n-TiO2 (0, 2, 2.5, and 5 wt%) was added to a ceramic glaze powder, applied to the surface of forty feldspathic ceramic specimens, and sintered. The surface roughness average (Ra) before glaze application (T0) and after glaze crystallization (T1) was measured using a profilometer. The colorimetric alteration was determined by CIEDE2000 (ΔE00) and CIELab (ΔEab), and the whiteness index for dentistry (ΔWID). The antibacterial effect against S. mutans and S. sanguinis was evaluated (CFU/mL). Data were analyzed by two-way repeated-measures ANOVA, followed by the Bonferroni test (α = 0.05). No differences in ΔEab and ΔE00 were observed among groups (p > 0.05), and ΔWID was only affected by 5% n-TiO2. All groups surpassed the perception thresholds of 1.8 (ΔE00) and 2.3 (ΔEab). At T0, no Ra differences were detected among groups (p > 0.05). In T1, Ra decreased (p < 005) compared to T0, but 5% n-TiO2 increased roughness compared to the control group (without n-TiO2). The incorporation of n-TiO2 into the glaze powder did not impair bacteria adhesion, and no differences in biofilm formation were found among the concentrations (p < 0.05). The ceramic covered with a glaze containing 5% n-TiO2 caused minimal interference in the color and roughness with no effect on biofilm formation.

Development of 3-dimensionally printed denture base material utilizing hybrid polymer: A preliminary investigation

STATEMENT OF PROBLEM

Current 3-dimensionally (3D) printed denture bases have inadequate strength and durability for long-term use, and milled denture bases generate excessive waste. Addressing these limitations is crucial to advancing prosthetic dentistry, ensuring improved patient outcomes and promoting environmental responsibility.

PURPOSE

The purpose of this in vitro study was to incorporate microparticles into a commercially available 3D printed denture base resin and compare its mechanical and biological properties with the conventional polymethyl methacrylate (PMMA) denture base material.

MATERIAL AND METHODS

Microparticles were collected from milled zirconia blanks and were blended with a 3D printing denture base resin (NextDent Denture 3D+). The optimal zirconia microparticle content (2%) for blending and printed was determined by using a liquid-crystal display (LCD) 3D printer. The printed specimens were then postrinsed and postpolymerized based on the manufacturer's instructions. Mechanical and biological characterization were carried out in terms of flexural strength, fracture toughness, and fungal adhesion. One-way ANOVA was carried out to analyze the results statistically.

RESULTS

The incorporation of microparticles in the 3D printed denture demonstrated higher mechanical strength (104.77 ±7.60 MPa) compared with conventional heat-polymerized denture base resin (75.15 ±24.41 MPa) (P<.001), but the mechanical strength deteriorated when compared with the unmodified 3D printing resin (122.17 ±11.58 MPa) (P<.001). However, the modified 3D printed denture showed greater antibacterial activity (1184.00 ±243.25 CFU/mL) than the unmodified resin (1486.50 ±103.94 CFU/mL) (P=.045).

CONCLUSIONS

The incorporation of microparticles into the 3D printed denture base resin demonstrated the potential to enhance the mechanical and biological properties of the denture base when compared with conventional techniques. However, when compared with the unmodified 3D printed denture base resin, the mechanical properties deteriorated while the biological properties improved.

Physical/mechanical and antibacterial properties of composite resin modified with selenium nanoparticles

BACKGROUND

Accumulation of biofilm over composite resin restorations is one of the principal causes of recurrent caries. Therefore, this study aimed to develop antibacterial composite resins by crystalline selenium nanoparticles (SeNPs), assessing the antibacterial, mechanical, and physical properties of the composite resin after SeNPs incorporation.

METHODS

SeNPs were synthesized via a green method. The nanoparticles were characterized by UV-Vis spectroscopy, fourier transform infrared (FT-IR) spectroscopy and transmission electron microscopy (TEM). The nano-filled composite (Filtek™ Z350XT ) was considered as a control group (G0). Two concentrations of SeNPs (0.005 wt% and 0.01 wt%.) were added to the tested resin composite (G1& G2), respectively. The physical/mechanical and antibacterial properties of the composite specimens (n = 10/group) were characterized. A one-way ANOVA was conducted to analyze these data followed by Bonferroni post hoc test for pairwise comparison.

RESULTS

Modified composites with SeNPs showed antibacterial activity against E. coli and S. mutans. Mechanical properties including diametral tensile strength, compressive strength, or surface roughness were not affected by nano-incorporation compared to control. Furthermore, the degree of conversion showed no statistical difference. However, SeNPs incorporation into resin composite produces color change that can be visually perceived.

CONCLUSIONS

The green synthesized SeNPs significantly improved the antimicrobial properties of the dental composite without compromising mechanical performance. However, it shows color change after SeNPs incorporation.

Dental Applications of Ion-Substituted Hydroxyapatite: A Review of the Literature

Hydroxyapatite (HA) forms an essential constituent of human teeth and bone. Its distinctive characteristic features, such as bioactivity and osteoconductivity, make it an ideal candidate to be used as an implant coating in restorative dentistry and maxillofacial surgery for bone regeneration. However, low fracture toughness and brittleness are a few of the inherent features of HA, which limit its application in load-bearing areas. The potential of HA to engage its lattice structure with either partial or complete substitution with external ions has become an increasing area of research as this phenomenon has the potential to enhance the biological and functional properties of the material. Consequently, this review aimed to highlight the role of various substituted ions in dental applications. Data indicate that the newly formed HA-substituted biomaterials demonstrate enhanced remineralization and antimicrobial activity along with improved hardness. Ion-substituted HA offers a promising strategy for future clinical research as these materials may be incorporated into various dental products for therapeutic treatments.

Mechanical properties, cytotoxicity, and protein adsorption of three-dimensionally printable hybrid resin containing zwitterionic polymer and silicate-based composites for dental restorations

OBJECTIVE

To evaluate the mechanical and biological properties of three-dimensionally (3D) printable resins filled with 2-methacryloyloxyethyl phosphorylcholine (MPC) and silicate-based composites and compare with those of a commercially available 3D-printable resin for definitive restorations.

METHODS

A group of 3D-printable hybrid resins (HRs) filled with 6 wt% MPC and three different compositions of silicate-based composites (barium silicate to zirconium silicate ratios: 1.50:1 for HR1, 0.67:1 for HR2, and 0.25:1 for HR3) were prepared. The HR groups were compared with the commercially available unfilled 3D-printable resin (CR) marketed for definitive restorations in terms of flexural strength and modulus, fracture toughness, surface roughness, Vickers hardness, light transmittance (all, n = 15), cytotoxicity, and protein adsorption (both, n = 3). All data were analyzed by using non-parametric Kruskal-Wallis and Dunn's tests (α=0.05).

RESULTS

The HR groups had significantly higher flexural strength, modulus, fracture toughness, and hardness values than the CR (P < 0.001). HR3 had the highest surface roughness and light transmittance among the groups (P ≤ 0.006). None of tested resins showed cytotoxicity. Both HR2 and HR3 showed significantly lower protein adsorption than the CR, with a difference of approximately 60% (P ≤ 0.026).

CONCLUSION

Both HR2 and HR3 exhibited superior mechanical properties (flexural strength, flexural modulus, fracture toughness, and Vickers hardness), light transmittance, and protein-repellent activity than the CR, with no impact on cytotoxicity.

CLINICAL SIGNIFICANCE

The MPC/silicate-based composite-filled resins may be a suitable alternative for definitive restorations, given their higher mechanical properties and promising biological properties to prevent microbial adhesion and subsequent biofilm formation, as well as their non-cytotoxic properties.

Polymer-Based Hydroxyapatite-Silver Composite Resin with Enhanced Antibacterial Activity for Dental Applications

The primary objective of this investigation was to synthesize a resin incorporating nanoparticles of hydroxyapatite and silver (HA-NpsAg) to enhance biocompatibility and antimicrobial efficacy, thereby facilitating potential implementation within the dental industry. These enhancements aim to ensure reliable, durable, functional, and aesthetically pleasing restorations while concurrently reducing susceptibility to bacterial colonization within the oral cavity. Hydroxyapatite powders were prepared using the sol-gel method and doped with silver nanoparticles obtained by chemical reduction. The crystalline amorphous calcium phosphate powder had a particle size of 279 nm, and the silver nanoparticles had an average diameter of 26.5 nm. Resin spheres containing HA-NpsAg (RHN) were then synthesized at two concentrations (0.5% and 1%) by dissolving the initial monomer mixture in tetrahydrofuran. Subsequent antimicrobial evaluations were conducted via agar diffusion and turbidimetry, employing three strains of Gram-negative bacteria (E. coli, K. oxytoca, and P. aeruginosa) and three strains of Gram-positive bacteria (S. mutans, S. aureus, and B. subtilis). The findings revealed that P. aeruginosa exhibited maximum susceptibility to RHN powder at a concentration of 0.5%, while RHN powder at 1% concentration demonstrated maximal inhibition against S. aureus and S. mutans. Overall, our study highlights the successful synthesis of a dental resin with hydroxyapatite and silver nanoparticles, exhibiting bactericidal properties at low silver concentrations. These findings hold promise for enhancing dental materials with improved antimicrobial efficacy and clinical performance.

Enhancing 3D-printed denture base resins: A review of material innovations

The limited physical and mechanical properties of polymethyl methacrylate (PMMA), the current gold standard, necessitates exploring improved denture base materials. While three-dimensional (3D) printing offers accuracy, efficiency, and patient comfort advantages, achieving superior mechanics in 3D-printed denture resins remains challenging despite good biocompatibility and esthetics. This review investigates the potential of innovative materials to address the limitations of 3D-printed denture base materials. Thus, this article is organized to provide a comprehensive overview of recent efforts to enhance 3D-printed denture base materials, highlighting advancements. It critically examines the impact of incorporating various nanoparticles (zirconia, titania, etc.) on these materials' physical and mechanical properties. Additionally, it delves into recent strategies for nanofiller surface treatment and biocompatibility evaluation and explores potential future directions for polymeric composites in denture applications. The review finds that adding nanoparticles significantly improves performance compared to unmodified resins, and properties can be extensively enhanced through specific modifications, particularly silanized nanoparticles. Optimizing 3D-printed denture acrylics requires a multifaceted approach, with future research prioritizing novel nanomaterials and surface modification techniques for a novel generation of superior performance, esthetically pleasing, and long-lasting dentures.

A Comprehensive Narrative Review of Nanomaterial Applications in Restorative Dentistry: Demineralization Inhibition and Remineralization Applications (Part I)

Nanotechnology is extensively employed in various aspects of dentistry, including restorative dentistry, because of its substantial improvement and promising potential in the clinical efficacy of restorative materials and procedures. The main purpose of this review is to explore the different uses of nanomaterials in restorative dentistry. The review is divided into two parts: the current review (Part 1) focuses on the prevention of demineralization and promotion of remineralization, while the upcoming review (Part 2) will discuss the reinforcement of restorative materials and their therapeutic applications. Nanofillers are added to dental materials to boost their antibacterial, anticaries, and demineralization inhibitory capabilities. Additionally, they improve remineralization and enhance both mechanical properties and therapeutic features. The nanoparticles (NPs) used to increase antibacterial and remineralization inhibitions can be classified into two main groups: inorganic and organic NPs. Examples of inorganic NPs include silver, zinc oxide, titanium oxide, and gold. Examples of organic NPs include silica, quaternary ammonium salt monomers, and chitosan NPs. Furthermore, the nanofillers utilized to enhance the process of remineralization include various types such as metals, nano-hydroxyapatite, nano-amorphous calcium phosphate (ACP), dicalcium phosphate NPs, casein phosphopeptide-ACP (CPP-ACP), and calcium fluoride NPs. These uses underscore the potential applications of NPs in restorative dentistry, although there are still some limitations to address.

Influence of Novel SrTiO3/MnO2 Hybrid Nanoparticles on Poly(methyl methacrylate) Thermal and Mechanical Behavior

While dental poly methyl methacrylate(PMMA) possesses distinctive qualities such as ease of fabrication, cost-effectiveness, and favorable physical and mechanical properties, these attributes alone are inadequate to impart the necessary impact strength and hardness. Consequently, pure PMMA is less suitable for dental applications. This research focused on the incorporation of Strontium titanate (SrTiO3-STO) and hybrid filler STO/Manganese oxide (MnO2) to improve impact resistance and hardness. The potential of STO in reinforcing PMMA is poorly investigated, while hybrid filler STO/MnO2 has not been presented yet. Differential scanning calorimetry is conducted in order to investigate the agglomeration influence on the PMMA glass transition temperature (Tg), as well as the leaching of residual monomer and volatile additives that could pose a threat to human health. It has been determined that agglomeration with 1 wt% loading had no influence on Tg, while the first scan revealed differences in evaporation of small molecules, in favor of composite PMMA-STO/MnO2, which showed the trapping potential of volatiles. Investigations of mechanical properties have revealed the significant influence of hybrid STO/MnO2 filler on microhardness and total absorbed impact energy, which were increased by 89.9% and 145.4%, respectively. Results presented in this study revealed the reinforcing potential of hybrid nanoparticles that could find application in other polymers as well.

Improving the Antibacterial Properties of Dental Bonding Materials Loaded with Silver Compounds

Biofilm accumulation, the appearance of white spot lesions and the development of secondary caries are the main complications in orthodontic patients. A promising approach to fight this situation is the development of adhesive cements with improved antibacterial properties. The aim of the present study was to evaluate the possibility of improving the antibacterial properties of glass ionomer cements by incorporating different types of antimicrobial compounds without altering their physical and mechanical properties. Different concentrations of silver carbonate (SC) and an inorganic glass with encapsulated silver were added to the glass ionomer cement, as well as chitosan, to achieve synergistic antibacterial activity. Variations in the antibacterial capacity were evaluated using the agar diffusion test; the potential alteration of the physical and mechanical properties of the material was analyzed by the shear bond strength test. SEM characterization and colorimetric evaluation were also conducted. Samples of SC up to 1% and inorganic glass with encapsulated silver up to 5% showed significant improvement in their antibacterial ability without compromising shear strength. The highest antimicrobial activity was observed for Lactobacillus acidophilus, with inhibition zones of 3.8 and 3.1 mm for SC and inorganic glass, respectively. The characterization of the samples did not detect any major structural changes between the different samples. The only group that underwent a noticeable color change was the group with SC. The results show that the incorporation of silver carbonate and inorganic glass with encapsulated silver provided the glass ionomer cement with an antibacterial capacity without compromising the bond strength and without modifying the structure of the material.

The germicidal effect, biosafety and mechanical properties of antibacterial resin composite in cavity filling

In recent years, dental resin materials have become increasingly popular for cavity filling. However, these materials can shrink during polymerization, leading to microleakages that enable bacteria to erode tooth tissue and cause secondary caries. As a result, there is great clinical demand for the development of antibacterial resins. The principle of antibacterial resin includes contact killing and filler-release killing of bacteria. For contact killing, quaternary ammonium salts (QACs) and antibacterial peptides (AMPs) can be added. For filler-release killing, chlorhexidine (CHX) and nanoparticles are used. These antibacterial agents are effective against gram-positive bacteria, gram-negative bacteria, fungi, and more. Among them, QACs has a lasting antibacterial effect, and silver nanoparticles even have a certain ability to kill viruses. Biocompatibility-wise, QACs, AMPs, and CHX have low cytotoxicity to cells when added into the resin. However, nanoparticles with smaller particle sizes have higher cytotoxicity. In terms of mechanical properties, QACs, AMPs, and CHX do not negatively affect the resin. However, the addition of magnesium oxide can have a negative impact. This paper reviews the types and antibacterial principles of commonly used antibacterial resins in recent years, evaluates their antibacterial effect, biological safety, and mechanical properties, and provides references for selecting clinical filling materials.

Mechanical and Biocompatibility Properties of 3D-Printed Dental Resin Reinforced with Glass Silica and Zirconia Nanoparticles: In Vitro Study

This study aimed to assess the mechanical and biocompatibility properties of dental resin reinforced with different nanoparticle additives. Temporary crown specimens were 3D-printed and grouped based on nanoparticle type and amount, including zirconia and glass silica. Flexural strength testing evaluated the material's ability to withstand mechanical stress using a three-point bending test. Biocompatibility was tested using MTT and dead/live cell assays to assess effects on cell viability and tissue integration. Fractured specimens were analysed using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) for fracture surface examination and elemental composition determination. Results show that adding 5% glass fillers and 10-20% zirconia nanoparticles significantly improves the flexural strength and biocompatibility of the resin material. Specifically, the addition of 10%, 20% zirconia, and 5% glass silica by weight significantly increases the flexural strength of the 3D-printed resins. Biocompatibility testing reveals cell viabilities greater than 80% in all tested groups. Reinforced 3D-printed resin holds clinical potential for restorative dentistry, as zirconia and glass fillers have been shown to enhance mechanical and biocompatibility properties of dental resin, making it a promising option for dental restorations. The findings of this study may contribute to the development of more effective and durable dental materials.

The Clinical Potential of 3D-Printed Crowns Reinforced with Zirconia and Glass Silica Microfillers

The development of 3D-printed crown resin materials with improved mechanical and physical properties is an area of growing interest in dentistry. This study aimed to develop a 3D-printed crown resin material modified with zirconia glass (ZG) and glass silica (GS) microfillers to enhance overall mechanical and physical properties. A total of 125 specimens were created and divided into five groups: control unmodified resin, 5% either ZG or GS reinforced 3D-printed resin, and 10% either ZG or GS reinforced 3D-printed resin. The fracture resistance, surface roughness, and translucency parameter were measured, and fractured crowns were studied under a scanning electron microscope. The results showed that 3D-printed parts that were strengthened with ZG and GS microfillers demonstrated comparable mechanical performance to unmodified crown resin but resulted in greater surface roughness, and only the group that contained 5% ZG showed an increase in translucency. However, it should be noted that increased surface roughness may impact the aesthetics of the crowns, and further optimisation of microfillers concentrations may be necessary. These findings suggest that the newly developed dental-based resins that incorporate microfillers could be suitable for clinical applications, but further studies are necessary to optimise the nanoparticle concentrations and investigate their long-term clinical outcomes.

Inorganic Compounds as Remineralizing Fillers in Dental Restorative Materials: Narrative Review

Secondary caries is one of the leading causes of resin-based dental restoration failure. It is initiated at the interface of an existing restoration and the restored tooth surface. It is mainly caused by an imbalance between two processes of mineral loss (demineralization) and mineral gain (remineralization). A plethora of evidence has explored incorporating several bioactive compounds into resin-based materials to prevent bacterial biofilm attachment and the onset of the disease. In this review, the most recent advances in the design of remineralizing compounds and their functionalization to different resin-based materials' formulations were overviewed. Inorganic compounds, such as nano-sized amorphous calcium phosphate (NACP), calcium fluoride (CaF₂), bioactive glass (BAG), hydroxyapatite (HA), fluorapatite (FA), and boron nitride (BN), displayed promising results concerning remineralization, and direct and indirect impact on biofilm growth. The effects of these compounds varied based on these compounds' structure, the incorporated amount or percentage, and the intended clinical application. The remineralizing effects were presented as direct effects, such as an increase in the mineral content of the dental tissue, or indirect effects, such as an increase in the pH around the material. In some of the reported investigations, inorganic remineralizing compounds were combined with other bioactive agents, such as quaternary ammonium compounds (QACs), to maximize the remineralization outcomes and the antibacterial action against the cariogenic biofilms. The reviewed literature was mainly based on laboratory studies, highlighting the need to shift more toward testing the performance of these remineralizing compounds in clinical settings.

Nanosilver/DCOIT-containing surface coating effectively and constantly reduces microbial load in emergency room surfaces

BACKGROUND

Colonization of near-patient surfaces in hospitals plays an important role as a source of healthcare-associated infections. Routine disinfection methods only result in short-term elimination of pathogens.

AIM

To investigate the efficiency of a newly developed antimicrobial coating containing nanosilver in long-term reduction of bacterial burden in hospital surfaces to close the gap between routine disinfection cycles.

METHODS

In this prospective, double-blinded trial, frequently touched surfaces of a routinely used treatment room in an emergency unit of a level-I hospital were treated with a surface coating (nanosilver/DCOIT-coated surface, NCS) containing nanosilver particles and another organic biocidal agent (4,5-dichloro-2-octyl-4-isothiazolin-3-one, DCOIT), whereas surfaces of another room were treated with a coating missing both the nanosilver- and DCOIT-containing ingredient and served as control. Bacterial contamination of the surfaces was examined using contact plates and liquid-based swabs daily for a total trial duration of 90 days. After incubation, total microbial counts and species were assessed.

FINDINGS

In a total of 2880 antimicrobial samples, a significant reduction of the overall bacterial load was observed in the NCS room (median: 0.31 cfu/cm²; interquartile range: 0.00-1.13) compared with the control coated surfaces (0.69 cfu/cm²; 0.06-2.00; P < 0.001). The nanosilver- and DCOIT-containing surface coating reduced the relative risk of a critical bacterial load (defined as >5 cfu/cm²) by 60% (odds ratio 0.38, P < 0.001). No significant difference in species distribution was detected between NCS and control group.

CONCLUSION

Nanosilver-/DCOIT-containing surface coating has shown efficiency for sustainable reduction of bacterial load of frequently touched surfaces in a clinical setting.

Synthesis of silver core-shell nanoparticles and their influence on an experimental resin endodontic sealer: An in vitro analysis

AIM

To avoid root canal recontamination and endodontic treatment failure, endodontic sealers with antibacterial activity could be an alternative. Silver nanoparticles have antibacterial activity and this study aimed to synthesize Ag@SiO₂ nanoparticles, incorporate them into an experimental endodontic resin sealer and evaluate their influence on physicochemical and biological properties.

METHODOLOGY

Ag@SiO₂ nanoparticles were produced using the sol-gel process, based on the Stöber method. The particles were characterized in terms of their chemical structure by Fourier transform-infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), UV-Vis spectral analysis, scanning electron microscopy, and transmission electron microscopy, where the particle morphology and diameter were analysed. A dual-cured experimental endodontic resin sealer was formulated using 70 wt% UDMA, 15 wt% GDMA, and 15 wt% BisEMA. The photoinitiators were added separately in two pastes. The Ag@SiO₂ nanoparticles were incorporated into the endodontic sealer at the concentrations of 2.5 wt%, 5 wt%, and 10 wt%, and a control group without nanoparticles was also formulated. The endodontic sealers were evaluated for their flow, film thickness, degree of conversion, softening in solvent, radiopacity, cytotoxicity and antibacterial activity immediately and after 9 months in water storage.

RESULTS

Silver was detected in the chemical characterization of Ag@SiO₂ that presented a spheric regular shape and average 683.51 nm ± 93.58 diameter. Sealers presented adequate flow and film thickness while radiopacity values were below the ones required by ISO 6876. All groups underwent softening after immersion in a solvent. The 10 wt% groups showed a higher loss of subsurface hardness (∆KHN%). No reduction in cell viability was observed. Enterococcus faecalis viability in biofilm was reduced in 10 wt% groups after 24 h and 9 months.

CONCLUSION

The addition of 10 wt% Ag@SiO₂ reduced E. faecalis viability at immediate and longitudinal analysis while maintaining the physicochemical properties of developed sealers.

Antibacterial one-step self-etching dental adhesive with silver nanoparticles synthesized in situ

OBJECTIVES

The objective of this study is to value the long-term antibacterial capability and adhesive properties of one-step self-etching dental adhesive containing silver nanoparticles (AgNPs) synthesized in situ.

METHODS

One-step self-etching adhesives with various weight percentages of silver 2-ethylhezanoate (0%, 0.05%, 0.10%, and 0.20%) were obtained by in-situ synthesis; the sizes and distribution of the AgNPs in resin were observed. The antibacterial effects of dentin-resin specimens were assessed by various test methods after being aged for 1 week to 1 year. The microtensile bond strength (μTBS) and interfacial nanoleakage (NL) were evaluated using extracted human teeth after being aged for 1 day and 1 year.

RESULTS

Uniform distribution of AgNPs in resin was observed in all experimental groups, and the average size was 4.71 nm-4.81 nm. All groups containing AgNPs showed significant antibacterial differences from the control group (P<0.05) over the ageing of 1 year. Although the increase of concentration tended to improve antibacterial activity, significant differences were not observed between the 0.10% and 0.20% groups (P>0.05). No significant differences were observed between all experimental groups and the control group in μTBS testing and NL testing at 1-day and 1-year time points (P>0.05).

CONCLUSIONS

0.10% AgNPs synthesized in situ might be appropriate to impart a long-term antibacterial ability to the one-step self-etching adhesive, without affecting its adhesive performance.

CLINICAL SIGNIFICANCE

This study suggests that in-situ synthesis of AgNPs is an effective method to improve the antibacterial ability of dental adhesives with the potential to inhibit secondary caries.

Developing a Novel Enamel Adhesive with Amorphous Calcium Phosphate and Silver Nanoparticles to Prevent Demineralization during Orthodontic Treatment

During fixed orthodontic treatment, white spot lesions are prevalent issues associated with cariogenic bacteria. This study aims to construct an orthodontic adhesive containing nanoparticles of amorphous calcium phosphate-polydopamine-Ag (NPA) fillers to combat white spot lesions. The NPA fillers were prepared and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). The biocompatibility of the fillers was evaluated. A colony counting test evaluated the antibacterial property of the fillers against Streptococcus mutans (S. mutans). NPA fillers were mixed with orthodontic adhesive (Transbond XT) at different weight ratios (0, 0.1, 0.2, 0.3, and 0.5 wt.%). The shear bond strength and antibacterial properties were then further investigated. The results showed that NPA was prepared successfully, with good antibacterial properties. The cell survival rate of all groups of fillers was higher than 70%, showing good biocompatibility. Moreover, the shear bond strength of the orthodontic adhesive with 0.2 wt.% NPA fillers was 11.89 ± 1.27 MPa, meeting the minimal clinical bond strength requirements of 7.8 MPa. Furthermore, the orthodontic adhesive resin blocks and the extract displayed good antibacterial properties, with the number of colonies decreasing significantly (p < 0.001). Taken together, we think that an orthodontic adhesive with NPA may have a good application potential for the prevention and treatment of white spot lesions.

Dual mode antibacterial surfaces based on Prussian blue and silver nanoparticles

Prussian Blue (PB) is an inexpensive, biocompatible, photothermally active material. In this paper, self-assembled monolayers of PB nanoparticles were grafted on a glass surface, protected with a thin layer of silica and decorated with spherical silver nanoparticles. This combination of a photothermally active nanomaterial, PB, and an intrinsically antibacterial one, silver, leads to a versatile coating that can be used for medical devices and implants. The intrinsic antibacterial action of nanosilver, always active over time, can be enhanced on demand by switching on the photothermal effect of PB using near infrared (NIR) radiation, which has a good penetration depth through tissues and low side effects. Glass surfaces functionalized by this layer-by-layer approach have been characterized for their morphology and composition, and their intrinsic and photothermal antibacterial effect was studied against Gram+ and Gram- planktonic bacteria.

Application of Nanomaterials in Restorative Dentistry

Dental composite resins are widely popular restoratives, as, when using these tools to restore the tooth, only the infected and affected carious structures are removed. This allows the patient to retain a greater quantity of their natural tooth structure than they would have using conventional principles of cavity preparation. Nanomaterials are a new concept concerning the manipulation of materials on an atomic or molecular level. However, on a nanoscale, the chemical, biological, and physical properties of an atom vary compared to the properties of its naturally occurring compound form. The main idea of shifting focus to the inclusion of nanomaterials is to aid in the detection, treatment, and prevention of the recurrence of a pathology (secondary caries). The primary aim of using nanomaterials in composites is to augment their strength, wear resistance, and microhardness. This usage also reduces polymerization shrinkage. Nanomaterials are capable of enhancing mechanical properties, life, and bond strength between dentin and restoration. This review aims to highlight different research studies and experiments that have been conducted on the use of nanomaterials in restorative dentistry in order to understand the versatility of these materials and their viability in practice.

YD, Anil S, Senthilkumar K, Seong GH, Sargod SS, Bhat SS, Venkatesan J. Remineralizing Potential of Natural Nano-Hydroxyapatite Obtained from Epinephelus chlorostigma in Artificially Induced Early Enamel Lesion: An In Vitro Study

Dental caries is a common problem in adolescents, leading to permanent loss of teeth or cavitation. Caries is a continuous process wherein demineralization and remineralization occur regularly. Hydroxyapatite (HA) is one of the most biocompatible and bioactive materials, as it closely resembles the mineral composition of teeth. The present study deals with isolating hydroxyapatite from fish bone (Epinephelus chlorostigma) by alkaline hydrolysis and thermal calcination. The isolated nano HA was characterized using FT-IR, XRD, TGA, FE-SEM-EDX, and HR-TEM analysis. The nano HA isolated by alkaline hydrolysis is nontoxic, and the cells are viable. The isolated HA enhances the proliferation of L929 cells. The remineralization potential of the extracted nano HA was evaluated in healthy premolars by DIAGNOdent/laser fluorescence quantification, surface microhardness test, and SEM-EDX analysis. Surface morphological observations in SEM and EDX analyses show that thermally calcined HA and alkali-treated HA can induce mineralization and deposit minerals. Therefore, HA obtained from Epinephelus chlorostigma could be a potential biomaterial for treating early caries.

Green synthesis of silver nanoparticles and their antibacterial effects

Antibacterial resistance is by far one of the greatest challenges to global health. Many pharmaceutical or material strategies have been explored to overcome this dilemma. Of these, silver nanoparticles (AgNPs) are known to have a non-specific antibacterial mechanism that renders it difficult to engender silver-resistant bacteria, enabling them to be more powerful antibacterial agents than conventional antibiotics. AgNPs have shown promising antibacterial effects in both Gram-positive and Gram-negative bacteria. The aim of this review is to summarize the green synthesis of AgNPs as antibacterial agents, while other AgNPs-related insights (e.g., antibacterial mechanisms, potential toxicity, and medical applications) are also reviewed.

Antibacterial Performance of Composite Containing Quaternary Ammonium Silica (QASi) Filler - a Preliminary Study

BACKGROUND

Antibacterial composite will have a significant clinical advantage in controlling caries. This study tests the antibacterial properties of a novel bulk-fill flowable composite (Infinx™, Nobio™ Ltd.) containing quaternary ammonium silica (QASi) filler particles.

METHODS

Infinix™ was tested in-vitro by the direct contact test (DCT), using E. faecalis or whole saliva as inoculum. A similar formula composite without QASi served as a control. In addition, composite test samples were polymerized on three volunteers' intact buccal enamel surfaces of mandibular first premolars in a split-mouth design experiment. Traditional composite served as control (Filtekt Bulk Fill™ 3M). Bacterial viability on the composite surfaces weres assessed ex-vivo microscopically six months later, using a fluorescent dead/live stain. Images of each bacterial sample were taken using a fluorescent microscope (Nikon Eclipse 80i), and further live/total cell analysis was performed using ImageJ software.

RESULTS

Following direct contact with one week of aged Infinix, more than 1 million E. faecalis bacteria were killed. Similarly, when using the saliva as inoculum, no single microorganism survived. Six-month in-vivo experiments supported these results by showing a reduction of 54%, 30% and 28% in live/total number of bacteria ratio retrieved from antibacterial composite vs. the control in volunteers #1, #2, #3 respectively.

CONCLUSION

Within the limitations of the experimental design, the present study suggest that antibacterial activity of quaternary ammonium silica particles (QASi) is comparable to that of previously described quaternary ammonium polyethyleneimine particles (QPEI). In addition, whole saliva bacteria are effectively killed by QASi-containing composite in-vitro and in-vivo, for a period of six month at least. Long-term full-scale clinical study is needed to confirm the findings of the present study and their implication on maintaining health balance.

CLINICAL SIGNIFICANCE

Antibacterial composites containing QASi filler is a novel class of restoratives that may contributes to caries lesion control.

Ranking and selection of dental restorative composite materials using FAHP-FTOPSIS technique: An application of multi criteria decision making technique

In the present investigation, the optimal formulations of dental restorative composite materials were designed using hybrid FAHP (Fuzzy Analytic Hierarchy Process)-FTOPSIS (Fuzzy Technique for Order of Preference by Similarity to Ideal Solution) methodology of statistical techniques. The dental composite was composed of an organic matrix and different types and ratios of inorganic filler. The various performance defining attributes (PDAs) such as compressive strength, flexural strength, depth of cure, and polymerization shrinkage were taken into account to evaluate the optimal formulation of dental restorative composite materials. The weight criteria of PDAs was evaluated by the FAHP; PDA-1 (0.084, 0.083, 0.083), PDA-2 (0.084, 0.095, 0.102), PDA-3 (0.079, 0.097, 0.110), PDA-4 (0.084, 0.108, 0.124), PDA-5 (0.084, 0.091, 0.093), PDA-6 (0.062, 0.083, 0.113), PDA-7 (0.070, 0.081, 0.098), PDA-8 (0.058, 0.071, 0.090), PDA-9 (0.073, 0.074, 0.092), PDA-10 (0.070, 0.076, 0.089), and PDA-11 (0.157, 0.135, 0.098), respectively. The FTOPSIS is used to determine the rank of alternatives as DHZ4 > DHZ8 > DHZ0 > DHZ6 > DHZ2. The Hybrid FAHP-FTOPSIS technique was significant in ranking analysis of different dental restorative composite materials under conflicting PDAs.

Dental resin composites with improved antibacterial and mineralization properties via incorporating zinc/strontium-doped hydroxyapatite as functional fillers

This study intends to improve the antibacterial and mineralization performance of photocurable dental resin composites (DRCs) to reduce the possibility of repair failure caused by secondary caries. To the end, functionalized hydroxyapatite (HAp), including Zn-doped (Zn/HAp) and Sr-doped HAp (Sr/HAp), were added into the bisphenol A glycidyl methacrylate and triethylene glycol dimethacrylate mixture, providing the DRCs with antibacterial and mineralization capacity, respectively. By controlling the total amount of inorganic filler at 70 wt%, these HAp powders were introduced into the resin matrix with barium glass powder (BaGP), while the ratios of HAp to aGP varied from 0:70 to 8:62. And the 8 wt% of HAp could be pure HAp, Zn/HAp, Sr/HAp, or Zn/HAp +Sr/HAp in different ratios (i.e. 2:6, 4:4, 6:2). Though the fillers varied, the obtained DRCs displayed similar micro-morphology, flexural strength (∼110 MPa) and modulus (∼7 GPa), and Vickers hardness (∼65). When the doping amounts of Sr²⁺/Zn²⁺reached 15 mol% of Ca²⁺in the Sr/HAp and Zn/HAp, the DRCs displayed a high antibacterial activity by killing ∼95%Staphylococcus aureus, and induced rich mineral deposition on surface in simulated body fluid. The incorporation of the Zn/HAp and Sr/HAp into the DRCs did not cause significant cytotoxicity, with L929 fibroblasts remaining >99% viability as cultured in extracts made from the DRCs. Therein, the DRC preparations containing both Zn/HAp and Sr/HAp have achieved improvements in both the biomineralization and antibacterial performance, as well as, having sufficient mechanical properties and excellent biocompatibility for dental restoration.

3D-Printed Strong Dental Crown with Multi-Scale Ordered Architecture, High-Precision, and Bioactivity

Mimicking the multi-scale highly ordered hydroxyapatite (HAp) nanocrystal structure of the natural tooth enamel remains a great challenge. Herein, a bottom-up step-by-step strategy is developed using extrusion-based 3D printing technology to achieve a high-precision dental crown with multi-scale highly ordered HAp structure. In this study, hybrid resin-based composites (RBCs) with "supergravity +" HAp nanorods can be printed smoothly via direct ink writing (DIW) 3D printing, induced by shear force through a custom-built nozzle with a gradually shrinking channel. The theoretical simulation results of finite element method are consistent with the experimental results. The HAp nanorods are first highly oriented along a programmable printing direction in a single printed fiber, then arranged in a layer by adjusting the printing path, and finally 3D printed into a highly ordered and complex crown structure. The printed samples with criss-crossed layers by interrupting crack propagation exhibit a flexural strength of 134.1 ± 3.9 MPa and a compressive strength of 361.6 ± 8.9 MPa, which are superior to the corresponding values of traditional molding counterparts. The HAp-monodispersed RBCs are successfully used to print strong and bioactive dental crowns with a printing accuracy of 95%. This new approach can help provide customized components for the clinical restoration of teeth.

Therapeutic Applications of Antimicrobial Silver-Based Biomaterials in Dentistry

Microbial infection accounts for many dental diseases and treatment failure. Therefore, the antibacterial properties of dental biomaterials are of great importance to the long-term results of treatment. Silver-based biomaterials (AgBMs) have been widely researched as antimicrobial materials with high efficiency and relatively low toxicity. AgBMs have a broad spectrum of antimicrobial properties, including penetration of microbial cell membranes, damage to genetic material, contact killing, and dysfunction of bacterial proteins and enzymes. In particular, advances in nanotechnology have improved the application value of AgBMs. Hence, in many subspecialties of dentistry, AgBMs have been researched and employed, such as caries arresting or prevention, root canal sterilization, periodontal plaque inhibition, additives in dentures, coating of implants and anti-inflammatory material in oral and maxillofacial surgery. This paper aims to provide an overview of the application approaches of AgBMs in dentistry and present better guidance for oral antimicrobial therapy via the development of AgBMs.

A scalable, low-cost and green strategy for the synthesis of ultralong hydroxyapatite nanowires using peanut oil

A scalable green and low-cost synthesis of ultralong hydroxyapatite nanowires using peanut oil is reported, which can be scaled up for large-scale low-cost production of ultralong hydroxyapatite nanowires and the fire-resistant inorganic paper.

Strategies toward development of antimicrobial biomaterials for dental healthcare applications

Several approaches for elimination of oral pathogens are being explored at the present time since oral diseases remain prevalent affecting approximately 3.5 billion people worldwide. Need for antimicrobial biomaterials in dental healthcare include but is not restricted to designing resin composites and adhesives for prevention of dental caries. Constant efforts are also being made to develop antimicrobial strategies for clearance of endodontic space prior root canal treatment and for treatment of periimplantitis and periodontitis. This article discusses various conventional and nanotechnology-based strategies to achieve antimicrobial efficacy in dental biomaterials. Recent developments in the design and synthesis of antimicrobial peptides and antifouling zwitterionic polymers to effectively lessen the risks of antimicrobial drug resistance are also outlined in this review. Further, the role of contemporary strategies such as use of smart biomaterials, ionic solvent-based biomaterials and quorum quenchers incorporated biomaterials in the elimination of dental pathogens are described in detail. Lastly, we mentioned the approach of using polymers to print custom-made three-dimensional antibacterial dental products via additive manufacturing technologies. This review provides a critical perspective on the chemical, biomimetic, and engineering strategies intended for developing antimicrobial biomaterials that have the potential to substantially improve the dental health.

Intelligent pH-responsive dental sealants to prevent long-term microleakage

OBJECTIVES

Microleakage is a determinant factor of failures in sealant application. In this study, DMAEM (dodecylmethylaminoethyl methacrylate), a pH-responsive antibacterial agent, was incorporated into resin-based sealant for the first time. The objectives of this study were to: (1) investigate the long-term performance of DMAEM-modified sealants against oral microbial-aging; and (2) investigate the long-term preventive effect of DMAEM-modified sealants on microleakage.

METHODS

Depth-of-cure and cytotoxicity of DMAEM-modified sealants were measured. Then, an aging model using biofilm derived from the saliva of high caries experience children was conducted. After aging, microhardness and surface roughness were measured. Biofilm activity, lactic acid production and exopolysaccharide (EPS) production were measured. 16S rRNA gene sequencing were also performed. The effects of DMAEM on microleakage were tested using an in vitro microleakage assessment.

RESULTS

The addition of DMAEM with a mass fraction of 2.5-10% did not affect depth-of-cure values and cytotoxicity of sealants. Adding 2.5-10% DMAEM did not affect the surface roughness and microhardness after aging. Compared to control, adding 2.5-10% DMAEM reduced biofilm metabolic activity by more than 80%. The lactic acid production and EPS production were reduced by 50% in DMAEM groups. DMAEM-modified sealants maintained the microbial diversity of biofilm after aging, they also inhibited the growth of lactobacillus. The 5% and 10% DMAEM groups exhibited a significant reduction in microleakage compared to control.

SIGNIFICANCE

The long-term antibacterial activities against oral microbial-aging and the long-term microecosystem-regulating capabilities enabled DMAEM-modified sealant to prevent microleakage in sealant application and thus prevent dental caries.

A novel dental adhesive containing Ag/polydopamine-modified HA fillers with both antibacterial and mineralization properties

OBJECTIVES

To evaluate the antibacterial and mineralization properties of a dental adhesive containing Ag/polydopamine-modified HA (HA, hydroxyapatite) fillers.

METHODS

First, an HA-polydopamine-Ag-polydopamine (HA-PDA-Ag-PDA) filler was prepared and characterized using SEM, TEM, XPS, XRD and FTIR. Then, the HA-PDA-Ag-PDA filler was mixed into an adhesive at different mass fractions (0 wt%, 0.5 wt%, 1 wt%, 2 wt%) to prepare a functional adhesive. Antibacterial and mineralization tests were carried out, and the cytotoxicity of the functional adhesive against L929 fibroblasts was also examined.

RESULTS

The SEM, TEM, XPS, XRD and FTIR characterizations confirmed the successful preparation of the HA-PDA-Ag filler. The 1 wt% and 2 wt% functional adhesives showed the strongest bacterial inhibition effect among all the samples (p < 0.05). Obvious apatite crystals were observed in the SEM micrograph of the surface of the functional adhesive sample after immersion in artificial saliva for predetermined times (1 d, 7 d, 14 d and 28 d). There was no significant difference between the experimental group and the control group in terms of cell proliferation activity (p > 0.05).

CONCLUSIONS

The 1 wt% and 2 wt% functional adhesives demonstrated good antibacterial and mineralization properties, as well as good biocompatibility.

CLINICAL SIGNIFICANCE

Functional adhesives containing Ag/polydopamine-modified HA fillers with antibacterial and mineralization capabilities might have excellent potential to enhance the stability and durability of hybrid layers and prolong the service life of dental restorations. Our study on bifunctional adhesives has paved the way for future clinical applications to increase restoration longevity.

Titanium Nanotube Modified With Silver Cross-Linked Basic Fibroblast Growth Factor Improves Osteoblastic Activities of Dental Pulp Stem Cells and Antibacterial Effect

Titanium modifications with different silver loading methods demonstrate excellent antibacterial properties. Yet pure silver nanoparticles with limited bioactive properties may delay regeneration of bone surrounding the dental implant. Therefore, loading silver with bioactive drugs on titanium surfaces seems to be a very promising strategy. Herein, we designed a silver (Ag) step-by-step cross-linking with the basic fibroblast growth factor (bFGF) by polydopamine (PDA) and heparin on titanium nanotube (TNT) as its cargo (TNT/PDA/Ag/bFGF) to improve the implant surface. Our results showed that TNT/PDA/Ag/bFGF significantly enhanced the osteogenic differentiation of dental pulp stem cells (DPSCs). It also showed an excellent effect in bacterial inhibition and a reduction of pro-inflammatory factors through inhibition of M1 macrophage activity. These results showed that bFGF cross-linked silver coating on TNTs presented good osteogenic differentiation and early anti-infiammatory and antibacterial properties. Together, this novel design on titanium provides a promising therapeutic for dental implants.

Development of 3D printed resin reinforced with modified ZrO2 nanoparticles for long-term provisional dental restorations

OBJECTIVE

To characterize and investigate efficacy of loading functionalized ZrO₂ nanoparticles in 3-dimensional (3D) printed acrylate ester-based resin subjected to accelerated aging in artificial saliva. As well as to evaluate the effect of ZrO₂ nanoparticle volume fraction addition on mechanical and physical properties of printed composite.

METHODS

Functionalized ZrO₂ nanoparticles were characterized using TEM and Raman spectroscopy. 3D printed dental resin was reinforced, with ZrO₂ nanoparticles, in the concentration range (0-5wt.%). The resulted nanocomposites, in term of structure and physical/mechanical properties were evaluated using different mechanical testing, microscopic and spectroscopic techniques.

RESULTS

ZrO₂ based nanocomposite was successful and formed composites were more ductile. Degree of conversion was significant at the highest level with blank resin and 1wt.%. Sorption revealed reduction associated with volume fraction significant to neat resin, however solubility indicated neat and 4wt.% had the lowest significant dissolution. Vickers represented critical positive correlation with filler content, while nanohardness and elasticity behaved symmetrically and had the maximum strength at 3wt.% addition. In addition, 3wt.% showed the highest fracture toughness and modulus. Improvement of flexural strength was significantly linked to filler concentration. Overall properties dramatically were enhanced after 3 months aging in artificial saliva, especially degree of conversion, microhardness, nanoindentation/elasticity, and flexural modulus. However, significant reduction was observed with flexural modulus and fracture toughness.

SIGNIFICANCE

The outcomes suggest that the newly developed 3D printed nanocomposites modified with ZrO₂ nanoparticle have the superior potential and efficacy as long-term provisional dental restoration materials.

Antifungal property of acrylic denture soft liner containing silver nanoparticles synthesized in situ

OBJECTIVES

Denture soft liner is applied to relieve pain from candida-induced denture stomatitis and promote healing, but with shortage of antifungal activity and easily harbors fungi. To overcome this problem, the in-situ method was used to synthesize silver nanoparticles (AgNPs) in acrylic soft liner to obtain antifungal effects.

METHODS

Acrylic soft-liner with various weight percentage of silver 2-ethylhexanoate (0%, 0.1 %, 0.2 %, 0.3 %) were prepared in 10 mm × 10 mm × 3 mm. After chemical polymerization, the diameter of AgNPs synthesized in situ and the degree of conversion of each group were measured. After 3, 7, and 14 days of storage in water, the antifungal rate (AFR) of in vitro direct contact antifungal assays and the antifungal test of non-cumulative extract solution were measured respectively. The release profiles of silver ions from the specimen within 14 days were also evaluated.

RESULTS

Evenly distributed AgNPs (4.7 nm-5.3 nm) were observed, and the degree of conversion had no significant difference among these groups. The AFR increased as the silver concentration rose, while decreasing with the storage time. After 14 days of water storage, the AFR of 0.2 % and 0.3 % groups still reached 63.38 % and 75.51 %, respectively. The non-cumulative extract solution had no antifungal effect.

CONCLUSIONS

Within the service life, the acrylic soft liner containing AgNPs synthesized in situ had effective control of Candida albicans through direct contact.

CLINICAL SIGNIFICANCE

This study suggests that AgNPs synthesized in situ may be an effective strategy in modifying acrylic denture soft liner to treat and prevent denture stomatitis.

Advances of Anti-Caries Nanomaterials

Caries is the most common and extensive oral chronic disease. Due to the lack of anti-caries properties, traditional caries filling materials can easily cause secondary caries and lead to treatment failure. Nanomaterials can interfere with the bacteria metabolism, inhibit the formation of biofilm, reduce demineralization, and promote remineralization, which is expected to be an effective strategy for caries management. The nanotechnology in anti-caries materials, especially nano-adhesive and nano-composite resin, has developed fast in recent years. In this review, the antibacterial nanomaterials, remineralization nanomaterials, and nano-drug delivery systems are reviewed. We are aimed to provide a theoretical basis for the future development of anti-caries nanomaterials.

Effect of the addition of functionalized TiO2 nanotubes and nanoparticles on properties of experimental resin composites

OBJECTIVE

To evaluate the influence of the addition of functionalized and non-functionalized TiO₂ nanostructures on properties of a resin composite.

METHODS

TiO₂ nanostructures were synthesized and functionalized, using 3-(aminopropyl)triethoxysilane (APTMS) and 3-(trimethoxysilyl)propyl methacrylate (TSMPM). Characterizations were performed with XRD, EDS, TEM, and TGA. Resin composites containing Bis-GMA/TEGDMA, CQ, DABE, and barium-aluminum silicate glass were produced according to TiO₂ nanostructure (nanotube or nanoparticle), concentration (0.3 or 0.9 wt%), and functionalization (APTMS or TSMPM). The resin composite without nanostructures was used as control. The amount of fillers was kept constant at 78.3 wt% for all materials. The degree of conversion (DC - at 0 h and 24 h), maximum polymerization rate (Rp_max), and Knoop microhardness (KHN before and after ethanol softening) were evaluated. Data were analyzed with two-way ANOVA with repeated measures and Tukey's HSD (α = 0.05).

RESULTS

TGA results demonstrated that functionalizations were effective for both nanostructures. For DC, resin composites, time and interaction effect were significant (p < 0.001). Higher DC was found for 0.3-wt%-functionalized-nanotubes at 24 h. For nanoparticles, only 0.9-wt%-non-functionalized and 0.3-wt%-APTMS-functionalized showed DC similar to the control and all other groups showed higher DC (p < 0.05). Rp_max was higher for 0.3-wt%-APTMS-nanotubes, which corresponded to higher DC after 24 h. The lowest Rp_max occurred for 0.9-wt%-TSMPM-nanotubes, which showed smaller DC at 0 h. For KHN, resin composites, ethanol softening and interaction effect were significant (p < 0.001). KHN decreased after ethanol softening all groups, except for 0.3-wt%-TSMPM-nanotubes, 0.9-wt%-TSMPM-nanotubes, and 0.3-wt%-non-functionalized-nanoparticles.

CONCLUSION

The resin with 0.3-wt%-TSMPM-nanotubes showed higher DC after 24 h, while being the most stable material after the ethanol softening.

SIGNIFICANCE

The addition of functionalized TiO₂ nanostructures in resin-based materials may improve the properties of the material.

Syntheses of Silver Nanowires Ink and Printable Flexible Transparent Conductive Film: A Review

Nowadays, flexible transparent conductive film (FTCF) is one of the important components of many flexible electronic devices. Due to comprehensive performances on optoelectronics, FTCF based on silver nanowires (AgNWs) networks have received great attention and are expected to be a new generation of transparent conductive film materials. Due to its simple process, printed electronic technology is now an important technology for the rapid production of low-cost and high-quality flexible electronic devices. AgNWs-based FTCF fabricated by using printed electronic technology is considered to be the most promising process. Here, the preparation and performance of AgNW ink are introduced. The current printing technologies are described, including gravure printing, screen printing and inkjet printing. In addition, the latest methods to improve the conductivity, adhesion, and stability of AgNWs-based FTCF are introduced. Finally, the applications of AgNWs-based FTCF in solar cells, transparent film heaters, optoelectronic devices, touch panel, and sensors are introduced in detail. Therefore, combining various printing technologies with AgNWs ink may provide more opportunities for the development of flexible electronic devices in the future.

Surface silanization and grafting reaction of nano-silver loaded zirconium phosphate and properties strengthen in 3D-printable dental base composites

In this work, surface modification of nano silver-loaded zirconium phosphate (6S-NP3) were obtained from simultaneous silanization of γ-methacryloxypropyltrimethoxysilane (MPS) and grafting reaction of methyl methacrylate (MMA), and then mixed with denture base resin (E-Denture) to prepare denture base composites using 3D printer printing. FT-IR spectra confirmed that surface silanization and grafting reaction had occurred and MPS and MMA were successfully anchored on the surface of 6S-NP3. XRD results demonstrated that surface modification had occurred on the surface of hexagonal lattice. The average diameter data indicated that the surface modification decreased the average diameter of nanoparticles. The water contact angle (WCA) was found increasing as the surface modification. SEM images illustrated that the dispersion and compatibility of nanoparticles in denture base composite materials had improved. The results of mechanical properties presented that composites with the addition of P-6S-NP3 nanoparticles achieved higher flexural strength, flexural modulus and impact strength. The data of antibacterial activities revealed that composites had exhibited good antibacterial activities against either S. aureus or E. coli and the latter showed better antibacterial efficacy than the former.

Fabrication and characterization of remineralizing dental composites containing hydroxyapatite nanoparticles

The aim of this study was to fabricate and characterize dental composites containing hydroxyapatite nanoparticles (HApNPs). Four dental composites were produced from the same organic matrix (70 wt% Bis-GMA and 30 wt% TEGDMA), with partial replacement of BaBSi particles (65 wt%) by HApNPs in the following concentrations (wt%): E0 (0) - control, E10 (10), E20 (20) and E30 (30). Ca²⁺ and PO₄^3- release was evaluated in solutions with different pHs (4, 5.5, and 7) using atomic emission spectroscopy with microwave-induced nitrogen plasma while the enamel remineralization potential was evaluated in caries-like enamel lesions induced by S. mutans biofilm using micro-CT. The following properties were characterized: degree of conversion (DC%), microhardness (KHN), flexural strength (FS), elastic modulus (EM) and translucency (TP). The higher the HApNPs content, the higher the Ca²⁺ and PO₄^3- release. The ions release was influenced by pH (4 > 5.5 > 7) (p < 0.05). All composites loaded with HApNPs were able to remineralize the enamel (E30 = E20 > E10) (p < 0.05). Contrarily, E0 was not able of recovering the enamel mineral loss. E0 and E10 presented highest DC%, while E20 and E30 showed similar and lowest DC%. KHN and FS were decreased with the addition of HApNPs, while EM was not influenced by the incorporation of HApNPs. E10 presented statistically similar TP to E0, while this property decreased for E20 and E30 (p < 0.05). Incorporation of HApNPs into dental composites promoted enamel remineralization, mainly at potentially cariogenic pH (= 4), while maintained their overall performance in terms of physicomechanical properties.

The Antibacterial Mechanism of Silver Nanoparticles and Its Application in Dentistry

Nanotechnology has recently emerged as a rapidly growing field with numerous biomedical science applications. At the same time, silver has been adopted as an antimicrobial material and disinfectant that is relatively free of adverse effects. Silver nanoparticles possess a broad spectrum of antibacterial, antifungal and antiviral properties. Silver nanoparticles have the ability to penetrate bacterial cell walls, changing the structure of cell membranes and even resulting in cell death. Their efficacy is due not only to their nanoscale size but also to their large ratio of surface area to volume. They can increase the permeability of cell membranes, produce reactive oxygen species, and interrupt replication of deoxyribonucleic acid by releasing silver ions. Researchers have studied silver nanoparticles as antimicrobial agents in dentistry. For instance, silver nanoparticles can be incorporated into acrylic resins for fabrication of removable dentures in prosthetic treatment, composite resin in restorative treatment, irrigating solution and obturation material in endodontic treatment, adhesive materials in orthodontic treatment, membrane for guided tissue regeneration in periodontal treatment, and titanium coating in dental implant treatment. Although not all authorities have acknowledged the safety of silver nanoparticles, no systemic toxicity of ingested silver nanoparticles has been reported. A broad concern is their potential hazard if they are released into the environment. However, the interaction of nanoparticles with toxic materials and organic compounds can either increase or reduce their toxicity. This paper provides an overview of the antibacterial use of silver nanoparticles in dentistry, highlighting their antibacterial mechanism, potential applications and safety in clinical treatment.

Applications of nano-materials in diverse dentistry regimes

Research and development in the applied sciences at the atomic or molecular level is the order of the day under the domain of nanotechnology or nano-science with enormous influence on nearly all areas of human health and activities comprising diverse medical fields such as pharmacological studies, clinical diagnoses, and supplementary immune system. The field of nano-dentistry has emerged due to the assorted dental applications of nano-technology. This review provides a brief introduction to the general nanotechnology field and a comprehensive overview of the synthesis features and dental uses of nano-materials including current innovations and future expectations with general comments on the latest advancements in the mechanisms and the most significant toxicological dimensions.

Comparative study of gelatin cryogels reinforced with hydroxyapatites with different morphologies and interfacial bonding

Gelatin cryogels are good candidate scaffolds for tissue engineering because of their interconnected macroporous structure. For bone regeneration, inorganic components are chosen to reinforce gelatin cryogels: (i) to mimic the compositions of natural bone tissue and (ii) to meet the mechanical requirements of bone repairing. Cryogels were prepared from methacrylated gelatin (GelMA) in this study, and hydroxyapatite nanorods (HANRs) with surface-grafted acrylate groups (D-HANRs) were synthesized to reinforce the cryogels, in which, the crosslinking between GelMA and D-HANRs was expected. In parallel, HANRs and hydroxyapatite nanowires (HANWs) were also composited with the GelMA cryogels to investigate the effects of filler morphology and interfacial bonding on the overall properties of the resulting composite cryogels comparatively. All these composite cryogels demonstrated potential as bone repairing materials by displaying excellent performances such as high porosity, appropriate water retention, shape recovery, and fast resilience features, as well as good biocompatibility and cell affinity. In comparison with the HANR composited GelMA cryogel, the HANWs were able to ameliorate the compression and the rheology performances of the resulting composite cryogels more efficiently due to the fact that the one-dimensional HANWs played a bridging role in the gelatin matrix. Among all the preparations, however, it was the D-HANRs that achieved the strongest reinforcement efficiency in mechanical properties because the double bonds on their surface could be photo-crosslinked with GelMA to form interfacial bonding. With these findings, we concluded that it was preferable for inorganic fillers designed for cryogel-type bone repairing materials to be in a one-dimensional morphology with surface functional groups to strengthen their interfacial bonding with the polymeric matrix.

Physicochemical and biological assessment of silver nanoparticles immobilized Halloysite nanotubes-based resin composite for dental applications

OBJECTIVE

The purpose of this study was to investigate the effect of Silver nanoparticle immobilized Halloysite Nanotubes (HNT/Ag) fillers on physicochemical, mechanical, and biological properties of novel experimental dental resin composite in order to compare with the properties of corresponding composites containing conventional glass fillers.

METHODS

Dental resin (Bis-GMA/TEGDMA with ratio 70/30) composites were prepared by incorporation of varied mass fraction of HNT/Ag. Experimental composites were divided into six groups, one control group and five experimental groups containing mass fraction 1 to 10.0 wt. % of HNT/Ag. Mechanical properties of the dental composites were recorded. Degree of conversion and depth of cure of the dental resin composites were assessed. Antimicrobial properties were assessed using agar diffusion test and evaluation of cytotoxicity were performed on NIH-3T3 cell line.

RESULTS

The inclusion of mass fractions (1-5 wt. %) of the HNT/Ag in dental resins composites, significantly improved mechanical properties. While, addition of larger mass fractions (7.5 and 10 wt. %) of the HNT/Ag did not show further improvement in the mechanical properties of dental resins composites. Theses composites also demonstrated satisfactory depth of cure and degree of conversion. A significant antibacterial activity was observed on S. mutans. No significant cytotoxicity was found on NIH-3T3 cell lines.

CONCLUSION

The incorporation of HNT/Ag in Bis-GMA/TEGDMA dental resins composites resulted in enhancement in mechanical as well as biological properties for dental applications.

CLINICAL SIGNIFICANCE

HNT/Ag containing dental composite is proposed to be highly valuable in the development of restorative dental material for patients with high risk of dental caries.