Flowable composites for restoration of non-carious cervical lesions: Results after five years

Comparative clinical evaluation between self-adhesive and conventional bulk-fill composites in class II cavities: A 1-year randomized controlled clinical study

OBJECTIVE

This randomized controlled clinical trial compared the clinical efficacy of self-adhesive bulk-fill Surefil One with a traditional bulk-fill composite in class II restorations.

MATERIALS AND METHODS

Sixty-four direct class II composite restorations were categorized into two groups. Group I, control group (n = 32): cavities were restored by Filtek One bulk-fill composite with Scotchbond Universal (SBU) adhesive in self-etch mode, Group II, test group (n = 32): cavities were restored by Surefil One self-adhesive bulk-fill composite. The study involved a follow-up period of 1 year, during which restorations were assessed at baseline (BL), 6 months, and 12 months using Federation Dentaire Internationale (FDI) criteria. Data analysis was performed using nonparametric tests. A comparison of restoration characteristics was performed utilizing the chi-square test (X2). The significance level was set at 0.05.

RESULTS

Filtek One and Surefil One bulk-fill composites revealed clinically acceptable FDI scores over 12-month recalls. Thirty-two patients (64 restorations) were available for all follow-up visits; 100% of the restorations survived. For esthetic properties, Filtek One was far better than Surefil One at all time points. However, in terms of functional and biological properties, both restorations demonstrated comparable performances.

CONCLUSIONS

Filtek One bulk-fill restorations were superior in terms of surface luster, surface staining, color match, and translucency, but Surefil One restorations performed well and were similar to Filtek One restorations; however, additional advancements and research are needed to obtain better esthetics. Furthermore, longitudinal studies with extended follow-up periods are needed to assess the clinical potential of both materials.

CLINICAL SIGNIFICANCE

Both Filtek One and Surefil One met the FDI criteria, with Filtek One demonstrating superior esthetic and functional qualities and similar performance regarding biological criteria. Both innovative restorative materials show potential for clinical use. Trial registered on ClinicalTrials.gov under registration number; NCT06120868:07/11/2023.

Influence of different viscosity and chemical composition of flowable composite resins: A 48-month split-mouth double-blind randomized clinical trial

OBJECTIVES

To evaluate the clinical performance of two flowable composites based on methacrylate and one based on ormocer in treating non-carious cervical lesions (NCCLs) after 48-month evaluation in a split-mouth double-blind clinical study design.

METHODS

A total of 183 restorations were performed on NCCLs using a universal adhesive system (Futurabond U, Voco GmbH) with selective enamel etching on 27 participants: two participants received twelve restorations each, three received nine restorations each, and 22 participants received six restorations each. Three different flowable composites were employed (n = 61): a low-viscosity methacrylate-based composite (GrandioSO Flow, LVM), a high-viscosity methacrylate-based composite (GrandioSO Heavy Flow, HVM), and an ormocer-based flowable composite (Admira Fusion Flow, ORM). All restorations were evaluated using FDI and USPHS criteria after 48 months. Statistical analysis was conducted using Kaplan-Meier Survival analysis and Kruskal-Wallis analysis of variance rank (α = 0.05).

RESULTS

After 48 months, 17 restorations were lost: LVM 6, HVM 9, ORM 2. The retention rates (95 % confidence interval) were 89.4 % for LVM, 80.4 % for HVM, and 95.6 % for ORM, with a significant difference between HVM vs. LVM and HVM vs. ORM (p < 0.05). Minor defects were observed in 30 restorations for marginal staining criteria (LVM 12, HVM 10, ORM 8) and in 71 restorations for marginal adaptation criteria (LVM 24, HVM 20, ORM 27) without significant difference between groups (p > 0.05). No restorations showed postoperative sensitivity or recurrence of caries.

SIGNIFICANCE

The increased viscosity of flowable composites could reduce the clinical longevity in NCCLs after 48 months. Ormocer-based and low-viscosity methacrylate-based flowable composites showed a successful clinical performance in NCCLs after 48 months.

Novel Resin-Based Antibacterial Root Surface Coating Material to Combat Dental Caries

Root caries caused by cariogenic bacteria are a burden on a large number of individuals worldwide, especially the elderly. Applying a protective coating to exposed root surfaces has the potential to inhibit the development of caries, thus preserving natural teeth. This study aimed to develop a novel antibacterial coating to combat root caries and evaluate its effectiveness using the antibacterial monomer dimethylaminohexadecyl methacrylate (DMAHDM). DMAHDM was synthesized and incorporated into a resin consisting of 55.8% urethane dimethacrylate (UDMA) and 44.2% TEG-DVBE (UV) at a 10% mass fraction of glass filler. Multiple concentrations of DMAHDM were tested for their impact on the resin's mechanical and physical properties. S. mutans biofilms grown on resin disks were analyzed for antibacterial efficacy. Cytotoxicity was assessed against human gingival fibroblasts (HGFs). The results showed an 8-log reduction in colony-forming units (CFUs) against S. mutans biofilm (mean ± sd; n = 6) (p < 0.05) when 5% DMAHDM was incorporated into the UV resin. There was a 90% reduction in metabolic activity and lactic acid production. A low level of cytotoxicity against HGF was observed without compromising the physical and mechanical properties of the resin. This coating material demonstrated promising physical properties, potent antibacterial effects, and low toxicity, suggesting its potential to protect exposed roots from caries in various dental procedures and among elderly individuals with gingival recession.

Polishing methods for composites restoration: the influence on human gingival fibroblasts behaviour

BACKGROUND

Carious/Non-carious cervical lesions with gingival recessions may require both dental and periodontal reconstructive therapy, where flaps/grafts may be placed in contact with a dental filling material. Human Gingival Fibroblasts (HGF-1) response during the early phase of healing could vary according to the procedures employed to cure the dental composite. Moreover, oxygen diffusion into dental composite inhibits the polymerization reaction, creating an oxygen-inhibited layer (OIL) that presents residual unreacted monomers. The aim of this study was to assess the effect of different polishing techniques and OIL on HGF-1.

METHODS

Composite discs polished with different techniques (diamond rubber, abrasive discs and tungsten carbide burr) were used. An additional not polished smooth group obtained with and without OIL was used as control. Samples were physically characterized through the analysis of their hydrophilicity and surface topography through contact angle measurement and SEM, respectively; afterwards the biologic response of HGF-1 when cultured on the different substrates was analyzed in terms of cytotoxicity and gene expression.

RESULTS

The finishing systems caused alterations to the wettability, even if without a proportional relation towards the results of the proliferation essay, from which emerges a greater proliferation on surfaces polished with one-step diamond rubber and with abrasive discs as well as a direct effect of the glycerin layer, confirming that surface roughness can heavily influence the biological response of HGF-1.

CONCLUSIONS

Surfaces wettability as well as cellular behavior seem to be affected by the selection of the finishing system used to lastly shape the restoration. Especially, the presence of OIL act as a negative factor in the regards of human gingival fibroblasts. The present study may provide the first clinical instruction regarding the best polishing system of composite material when the restoration is placed directly in contact with soft tissue cells. Understanding HGF-1 behavior can help identifying the polishing treatment for direct restoration of carious/non-carious cervical lesions associated with gingival recessions.

Prolonged polymerization of a universal adhesive in non-carious cervical lesions: 36-month double-blind randomized clinical trial

OBJECTIVE

To evaluate the effect of prolonged (P) polymerization time of a universal adhesive system applied in etch-and-rinse (ER) or self-etch (SE) strategies on the clinical performance of restorations in non-carious cervical lesions (NCCLs), after 36 months of clinical service.

METHODS

A total of 140 restorations were randomly placed in 35 subjects according to the polymerization time groups: ER (10 s); ER-P (40 s); SE (10 s); and SE-P (40 s) at 1,200 mW/cm2. Composite resin was placed incrementally. The restorations were evaluated immediately and after 6, 12, 18, and 36 months using the FDI criteria. Data were analyzed using the Kaplan-Meier survival test for retention loss, and the Kruskal-Wallis' test for secondary outcomes (α = 0.05).

RESULTS

After 36 months, 19 restorations were lost: ER 6, ER-P 2, SE 9, SE-P 2. The retention rates were 82.3% for ER; 94.1 % for ER-P; 73.5 % for SE; and 94.1 % for SE-P, with a significant difference between ER vs. ER-P and SE vs. SE-P, as well as ER vs. SE-P and ER-P vs. SE (p < 0.0001). Minor defects were observed in 18 restorations for the marginal staining criteria: ER 5, ER-P 2, SE 8, SE-P 3; and in 33 restorations for the marginal adaptation criteria: ER 11, ER-P 4, SE 12, and SE-P 6 (p > 0.05). No restorations showed recurrence of caries or postoperative sensitivity.

CONCLUSIONS

A prolonged polymerization time of 40 s improves the clinical performance of the universal adhesive for both adhesive strategies evaluated, even after 36 months.

CLINICAL SIGNIFICANCE

Prolonging the polymerization time of a universal adhesive from 10 to 40 s has been shown to improve its clinical performance when used in NCCLs.

[Flexural strength of conventional flowable, bulk fill flowable and highly filled flowable resin composites: in vitro study.]

Objective

To evaluate and compare the flexural strength of conventional flowable, bulk fill flowable and highly filled flowable resins.

Materials and methods

Thirty 2mm x 2mm x 25mm specimens of Tetric N-Flow (TNF), Filtek Bulk Fill Flowable Restorative (FBF) and Beautifil Flow Plus F00 (BFP) flowable resins were made up; they were distributed into three groups according to brand (n=10) and stored in distilled water for 24 hours at 37ºC. The 3-point bending test according to ISO 4049 was performed on a universal testing machine at a speed of 0.5 mm/min until fracture. The results were evaluated with Anova and Tukey tests. P<0.05.

Results

Statistically significant differences were found between the groups with a value of p=0.011. According to the statistical analysis, the groups that showed statistically significant differences were the BFP and TNF groups (p=0.015) and the BFP and FBF groups (p=0.035), while no statistically significant difference was found in the TNF and FBF groups.

Conclusion

The high-filled flowable resin presents better flexural strength compared to the conventional flowable and bulk fill flowable resins, while the conventional and bulk fill flowable resins have no statistically significant difference.

Five-year clinical evaluation of universal adhesive applied following different bonding techniques: A randomized multicenter clinical trial

OBJECTIVES

To evaluate the clinical performance of a universal adhesive system (Futurabond U, Voco) when applied following different adhesive strategies in non-carious cervical lesions (NCCLs) after 5 years.

METHODS

Fifty participants were included. Futurabond U (Voco) was applied in NCCLs using four adhesive strategies (n = 50 each): only self-etch (SE); selective enamel etching + self-etch (SET + SE); etch-and-rinse with dry dentin (ERD); and etch-and-rinse with wet dentin (ERW). All cavities were restored with Admira Fusion composite resin (Voco). Restorations were evaluated after 1, 3, and 5 years using the World Federation criteria (FDI) and the modified United States Public Health Service (USPHS) criteria.

RESULTS

After 5 years, retention rates were 81 % (65.8-90.5) for SE, 87 % (73.2-94.4) for SET + SE, 84 % (69.6-92.6) for ERD, and 78 % (63.6-88.9) for ERW (p > 0.05). Thirty-five restorations were considered to have minor discrepancies in marginal adaptation at the 5-year recall (14 for SE, 9 for SET + SE, 6 for ERD, and 6 for ERW; p > 0.05). Sixteen restorations were detected as a minor marginal discoloration (6 for SE, 4 for SET + SE, 1 for ERD, and 5 for ERW; p > 0.05) and one restoration showed a recurrence of caries (1 for ERW; p > 0.05) at the 5-year recall. No restorations showed postoperative sensitivity after 5 years.

SIGNIFICANCE

NCCLs restorations using a universal adhesive showed satisfactory clinical performance after 5 years, regardless of the adhesive strategy.

Patients´ satisfaction concerning direct anterior dental restoration

The objective of this study was to observe patients' satisfaction with their in-service direct anterior dental restorations and to compare it with clinical evaluation using FDI (Federation Dental International) criteria. Patients scored their own anterior dental restorations regarding satisfaction (satisfactory /dissatisfactory). If dissatisfaction was mentioned, then, they would be interviewed about the complaint. In the same session, the dental restorations were clinically evaluated by two dentists using FDI criteria (1-5 score) concerning esthetic, functional, and biological domains. Descriptive statistics were used for frequencies of scores attributed by patients and clinicians. In order to compare patients' to clinicians' frequencies, the Chi-square test was applied (p ≤ 0.05). A total of 106 restorations were evaluated by patients and clinicians. Patients reported 52.8% of restorations satisfactory and 47.8% dissatisfactory. Overall, clinicians reported the same restorations as 82,3% satisfactory and 17,6% dissatisfactory. Patients' most frequent complaints referred to color, followed by anatomical form, fracture of material and retention, and approximal anatomical form. Comparing patients' satisfaction and dissatisfaction rates to clinicians' evaluation per criteria, there was no difference regarding esthetics. The frequency of dissatisfactory restorations by clinicians was significantly lower when functional and biological properties were compared with patients' opinions. Direct anterior dental restorations were more frequently reported as satisfactory by patients and clinicians, being the main complaints related to esthetic issues. When clinicians and patients' evaluations were compared, it was observed that the frequencies of satisfactory restoration by patients and clinicians were similar regarding esthetic properties, and significantly different regarding functional and biological properties.

Noncarious cervical lesions: Morphology and progression, prevalence, etiology, pathophysiology, and clinical guidelines for restoration

PURPOSE

To synthesize the literature regarding noncarious cervical lesions (NCCLs) and propose clinical guidelines when lesion restoration is indicated.

MATERIAL AND METHODS

A PubMed search was performed related to NCCL morphology, progression, prevalence, etiology, pathophysiology, and restoration.

RESULTS

NCCLs form as either rounded (saucerlike) depressions with smooth, featureless surfaces that progress mainly in height or as V-shaped indentations that increase in both height and depth. Prevalence ranges from less than 10% to over 90% and increases with age. Common locations are the facial surfaces of maxillary premolars. They have a multifactorial etiology due to personal habits such as excessive horizontal toothbrushing and consumption of acidic foods and drinks. Occlusal factors have been identified as contributing to the prevalence of NCCLs in some studies, whereas other studies indicate there is no relationship. The concept of abfraction has been proposed whereby mechanical stress from occlusal loading plays a role in the development and progression of NCCLs with publications supporting the concept and others indicating it lacks the required clinical documentation. Regardless of the development mechanism, demineralization occurs and they are one of the most common demineralization diseases in the body. Treatment should be managed conservatively through preventive intervention with restorative treatment delayed until it becomes necessary due to factors such as lesion progression, impact on patient's quality of life, sensitivity, poor esthetics, and food collection may necessitate restoration. Composite resins are commonly used to restore NCCLs although other materials such as glass ionomer and resin-modified glass ionomer are also used. Sclerotic dentin does not etch like normal dentin and therefore it has been recommended to texture the dentin surface with a fine rotary diamond instrument to improve restoration retention. Some clinicians use mechanical retention to increase retention. Beveling of enamel is used to increase the bonding area and retention as well as enhance the esthetic result by gradually creating a color change between the restoration and tooth. Both multistep and single-step adhesives have been used. Dentin etching should be increased to 30 seconds due to the sclerotic dentin with the adhesive agent applied using a light scrubbing motion for 20 seconds but without excessive force that induces substantial bending of a disposable applicator. Both flowable and sculptable composite resins have been successfully used with some clinicians applying and polymerizing a layer of flowable composite resin and then adding an external layer of sculptable composite resin to provide enhanced resistance to wear. When caries is present, silver diamine fluoride has been used to arrest the caries rather than restore the lesion.

CONCLUSIONS

Noncarious cervical lesions (NCCLs) form as smooth saucerlike depressions or as V-shaped notches. Prevalence values as high as 90% and as low as 10% have been reported due to habits such as excessive toothbrushing and an acidic diet. Occlusal factors have been proposed as contributing to their presence but it remains controversial. Publications have both supported and challenged the concept of abfraction. They are one of the most common demineralization diseases in the body. Conservative treatment through prevention is recommended with restorative treatment delayed as long as possible. When treatment is needed, composite resins are commonly used with proposed restorative guidelines including texturing the sclerotic dentin, beveling the enamel, potential use of mechanical retention, 30 seconds of acid etching, and use of either multistep or single-step adhesives in conjunction with a light scrubbing motion for 20 seconds without excessive force placed on disposable applicators.

Randomized clinical split-mouth study on a novel self-adhesive bulk-fill restorative vs. a conventional bulk-fill composite for restoration of class II cavities - results after three years

OBJECTIVES

This randomized prospective split-mouth study evaluated the clinical performance of a novel, tooth-colored, self-adhesive bulk-fill restorative (SABF, 3M) for restoration of class II cavities as compared to a conventional bulk-fill composite (Filtek One, 3M; FOBF) over 36 months. The null-hypothesis was that both materials perform equally regarding clinical success and performance according to the FDI clinical criteria and scoring system.

METHODS

30 patients received one SABF and one FOBF restoration each. For FOBF, Scotchbond Universal (3M) was used as adhesive (self-etch mode), whereas SABF was applied without adhesive. Two blinded examiners evaluated the restorations at baseline, 24 and 36 months using FDI criteria. Data were analyzed non-parametrically (χ²-tests; α=0.05).

RESULTS

29 patients were available for the 24- and 36-month examinations. Clinical success rate was 96.6% for both materials at 36-mo (one restoration failure due to secondary caries each). All other restorations revealed clinically acceptable FDI scores at all recalls. FOBF performed significantly better than SABF at all time points regarding surface lustre (p<0.001) and color match and translucency (p<0.001) and regarding marginal staining at 36-months (p=0.008). Marginal staining and marginal adaptation deteriorated significantly over time for both materials (both p<0.001).

CONCLUSIONS

The null-hypothesis could only partially be rejected. Both materials performed similarly regarding clinical success and performance within 36 months of clinical service, but SABF exhibited significantly inferior, but clinically fully acceptable esthetic properties as compared to FOBF. Both restorative materials showed clinically fully acceptable results over 36 months of clinical service and thus may be recommended for clinical use.

CLINICAL SIGNIFICANCE

The novel tooth-colored self-adhesive bulk-fill restorative exhibited clinically fully acceptable results over 36 months of clinical service, similarly to a conventional bulk-fill restorative used with a universal adhesive, but with slight shortcomings in esthetic properties. Therefore, both restorative materials may be recommended for clinical use.

A Systematic Review and Meta-Analysis of the Success of Resin Composite Restorations

Aim:

This review examines the studies on resin composites within the past decade and evaluates the materials’ application methods and success through Fédération Dentaire Internationale (FDI) scores.

Materials and Methods:

Search results from three databases (a total of 3295 studies) were transferred to Mendeley Desktop (Mendeley, London, UK) software and deduplicated (2638 studies). Eight studies were included in this meta-analysis after scanning the title, abstract, and full-text screening. Risk of bias analysis was performed using the Cochrane Handbook tool. Shapiro–Wilk, Kolmogorov–Smirnov, Kruskal–Wallis, and post hoc Tamhane’s T2 were used for statistical analysis.

Results:

Conventional composite’s surface staining FDI score was higher than flowable and silorane composites (no difference between these two). Also, conventional composite has the highest score in terms of staining. Conventional composite + two-step self-etch adhesive and bulk fill composite + two-step self-etch adhesive have lower FDI scores in marginal staining. In noncarious cervical lesions (NCCL), conventional composite + two-step total-etch adhesive has a higher score than flowable composite + two-step self-etch adhesive. Flowable composite + two-step self-etch adhesive and conventional composite + single-step self-etch adhesive have the highest FDI scores for marginal adaptation (no statistical difference between them). Conventional composite + two-step self-etch adhesive and bulk fill composite + two-step self-etch have the lowest scores (no statistical difference between them). For recurrence of caries, all groups have Score 1, the best score, and there is no significant difference between them.

Conclusions:

Each restorative material and adhesive system has different advantages, and the practitioner must choose the most appropriate.

Evaluation of Color and Spectral Behavior of a Novel Flowable Resin Composite after Water Aging: An In Vitro Study

Background: This study aimed to evaluate the color matching, light transmittance, and reflectance characteristics of the novel flowable resin composite OCF-001 (OCF). Methods: Fifty-four resin composite molds were made with simulated class I cavities of A2, A3, and A4 shades by filling the rubber mold interspace with Estelite Sigma Quick (ESQ), Gracefil Putty (GP) and Filtek Supremme Ultra (FSU). After applying the adhesive, three different flowable resin composites (n = 6), OCF, Gracefil LoFlo (GLF), and Supreme Ultra Flowable (SUF), were used to fill the cavities. A colorimeter was used to measure the color parameters (CIEDE2000). The color measurements were taken immediately and after 28 days. Data were analyzed using the nonparametric Kruskal–Wallis (α = 0.05) and Wilcoxon tests. The light transmittance and reflection characteristics were measured with a black background using a spectrophotometer under D65 illumination. Results: The ΔE₀₀, and ΔC of OCF was lower than other tested materials in A2 and A3 shades both immediately and after 28 days. OCF showed the highest transmittance characteristic, and a relatively stable reflectance curve in all the wavelengths. Conclusions: OCF showed better shade matching with the surrounding shades of A2 and A3, a relative uniform reflectance and higher light transmission properties.

B, Garoushi S. Fracture Behavior and Integrity of Different Direct Restorative Materials to Restore Noncarious Cervical Lesions

The purpose of this study was to analyze the fracture resistance and marginal leakage of noncarious cervical lesion (NCCL) restorations made of different restorative materials. Eighty upper premolars were randomly divided into four groups (n = 20/group). Standardized NCCL cavity preparations were performed on the buccal surface of the teeth and then restored with four different materials. Group 1: Packable resin composite (PC); Group 2: Highly flowable resin composite (HF); Group 3: Low flowable resin composite (LF); Group 4: Resin modified glass ionomer cement (RMGIC). After restorations were completed, cyclic and static fracture behavior was evaluated using a loading testing machine. Extra restored teeth were sectioned and then stained (n = 5/group). The specimens were viewed under a stereo microscope and the percentage of microgaps at the tooth–restoration interface was calculated. All restored teeth survived after fatigue loading. There was no statistically significant (p > 0.05) difference between the tested restorations after the static loading test. NCCLs restored with highly filled flowable composite showed the least microleakage among the tested groups (p < 0.05). The investigated restorative materials are acceptable for NCCL restorations in terms of fracture resistance and microleakage.

Randomized clinical split-mouth study on the performance of CAD/CAM-partial ceramic crowns luted with a self-adhesive resin cement or a universal adhesive and a conventional resin cement after 39 months

Objectives To determine the clinical performance of partial ceramic crowns (PCCs) luted with a conventional resin cement combined with a universal adhesive without or with selective enamel etching or luted with a self-adhesive resin cement. Methods In a split-mouth design, each three CAD/CAM-PCCs (Vita Mark II, Cerec) were placed in 50 patients. Two PCCs were luted with a conventional resin cement (RelyX Ultimate) combined with a universal adhesive (Scotchbond Universal) without (SB-E) or with (SB+E) selective enamel etching. The third PCC was luted with a self-adhesive resin cement (RelyX Unicem 2; RXU). Chi-square tests (α≤0.05) were applied. Based on clinical failures (complete debonding or need for replacement of the restorations), Kaplan-Meier survival analysis was performed. Results 31 patients were evaluated clinically using FDI criteria at 39 months. Clinically acceptable results were detected over time, except for "fracture of material and retention" (inacceptable fractures and debondings). Within materials, statistically significant differences (p ≤ 0.003) between baseline and 39 months were found for "marginal adaptation" and "marginal staining". At 39-month, SB+E and SB-E showed significantly better results compared to RXU in "marginal adaptation"(p ≤ 0.021) and "marginal staining"(p ≤ 0.013). Kaplan-Meier analysis showed higher survival rates after 39 months for SB+E (96%) and SB-E (88%) compared to RXU (69%) with statistically significant differences between RXU vs. SB-E (p = 0.022) and RXU vs. SB+E (p ≤ 0.001). Conclusions After 39-months, PCCs luted with the self-adhesive resin cement exhibited a statistically significant inferior survival rate compared to restorations luted with the conventional resin cement combined with a universal adhesive without or with selective enamel etching. Clinical significance Currently, self-adhesive resin cements cannot be recommended for luting partial ceramic crowns. However, the standard adhesive luting procedure comprising a universal adhesive and luting composite yielded good clinical results for more than 3 years irrespectively of application of a selective enamel etching step.

Is clinical behavior of composite restorations placed in non-carious cervical lesions influenced by the application mode of universal adhesives? A systematic review and meta-analysis

OBJECTIVE

To answer the following PICOS question: "Is the risk of retention loss, marginal discoloration, marginal adaptation and postoperative sensitivity (POS) equal for etch-and-rinse (EAR) compared to self-etch (SE) or selective-enamel etch (SEE) mode when restoring non carious cervical lesions (NCCLs) with universal adhesives?".

METHODS

PubMed, Scopus, Web of Science, Cochrane Central Register of Controlled Trials, Scientific Electronic Library Online, LILACS, OpenGrey and Google Scholar™ were searched. Randomized controlled clinical trials in which resin composites and universal adhesives were used for restoration of NCCLs were considered. Cochrane Risk of Bias Tool was used to assess the risk of bias. Meta-analyses were performed using Revman; random-effects models were applied, and heterogeneity was tested using the I² index. The significance level was set at p < 0.05. Certainty of evidence was assessed by GRADE tool.

RESULTS

After screening, 20 articles were included in qualitative, while 14 articles were used for quantitative synthesis. Twelve studies ranked as "low", while 8 studies scored as "unclear" for risk of bias. At 12- and 18/24-months the risk for retention loss was higher for SE than for EAR groups (p = 0.005; RR = 0.22, 95% CI [0.08, 0.63],[moderate certainty of evidence and p = 0.0002; RR = 0.32, 95% CI [0.17, 0.58], moderate certainty of evidence, respectively). No significant differences were observed for marginal discoloration and adaptation (p > 0.05). The probability of POS occurrence was less in SE than in EAR groups (RR = 2.12, 95% CI [1.23, 3.64], moderate certainty of evidence). The certainty of evidence for other outcomes was scored as "low" or "moderate", depending on the follow-up period.

SIGNIFICANCE

Using universal adhesives in EAR or SEE mode provides more predictable retention, while SE strategy reduces the risk of POS occurrence.

One-year results of a novel self-adhesive bulk-fill restorative and a conventional bulk-fill composite in class II cavities-a randomized clinical split-mouth study

Objectives

In the context of the phase-down of amalgam, development of easily applicable, permanent restorative materials is of high clinical interest. Aim of this study was to evaluate the clinical performance of a novel, tooth-colored, self-adhesive bulk-fill restorative (SABF, 3M Oral Care) and a conventional bulk-fill composite (Filtek One, 3M Oral Care; FOBF) for restoring class II cavities. The null-hypothesis tested was that both materials perform similar regarding clinical performance.

Materials and methods

In this randomized split-mouth study, 30 patients received one SABF and one FOBF restoration each. Scotchbond Universal (3M Oral Care) was used as adhesive for FOBF (self-etch mode), while SABF was applied directly without adhesive. Restorations were evaluated by two blinded examiners at baseline, 6 months and 12 months employing FDI criteria. Non-parametric statistical analyses and χ²-tests (α = 0.05) were applied.

Results

Thirty patients (60 restorations) were available for the 6- and 12-month recalls exhibiting 100% restoration survival. All restorations revealed clinically acceptable FDI scores at all time points and for all criteria. Only regarding esthetic properties, FOBF performed significantly better than SABF regarding surface lustre (A1) and color match and translucency (A3) at all time points and marginal staining (A2b) at 12 months.

Conclusions

The null-hypothesis could not be rejected. Both materials performed similarly regarding clinical performance within the first year of clinical service. SABF exhibited slightly inferior, but clinically fully acceptable esthetic properties as compared to FOBF.

Clinical relevance

Within the limitations of this study, the self-adhesive bulk-fill restorative showed promising results and may be recommended for clinical use.

Scoping review of trials evaluating adhesive strategies in pediatric dentistry: where do simplified strategies lie?

BACKGROUND

Adhesive restorations allow a conservative approach to caries management and are increasingly used as a restorative option in pediatric dentistry. Placement can be difficult in children because of the cooperation required for multiple bonding steps. Due to this, it is vital to assess if novel, simpler strategies have been featured in clinical trials and if clinical trials are researching the different existing adhesive strategies.

METHODS

This review followed Preferred Reporting Items for Systematic Reviews and Meta-analysis adapted for Scoping Reviews (PRISMA-ScR) guidelines. PubMed/Medline, Cochrane Central, Scopus and EMBASE were used for systematic search, using free keywords and controlled search terms. Clinical trials of children requiring a restorative intervention which featured adhesive strategies were included. Only peer-reviewed trials of primary teeth restored with resin composites, published in the last 10-year period were eligible. Data charting was accomplished independently by two reviewers, and studies were summarized according to their date, type, intervention, sample size, observation period, outcomes and conclusions. Quality assessment was performed using Cochrane's Risk of Bias 2.0 tool.

RESULTS

700 potentially relevant references were found, which after a rigorous inclusion scheme, resulted in a total of 8 eligible clinical trials. Out of these, 7 were randomized clinical trials. Most trials featured a split-mouth design and the observation period ranged from 12 to 36 months. The trials evaluated interventions of two self-adhesive composites, two bulk-fill composites, two novel composites, one compomer and eight adhesives from different strategies. Most studies (4/8) included were judged to raise some concerns regarding risk of bias, while two were classified as high risk and two as low.

CONCLUSION

Few studies comparing adhesive strategies were found, especially adhesives in sound substrates. The existing studies do not reflect all current approaches that could be used in pediatric dentistry. Further studies addressing bioactive composites and contemporary adhesives are necessary.

In vitro and In vivo evaluation of resin composites fluorescence

This study aimed at comparatively evaluate, by visual method, the fluorescence intensity in vitro and in vivo of six resins composed of different classifications and viscosities compared to natural enamel. For the in vitro study, seventy specimens were prepared and for the in vivo study, a restoration was performed on the cervical portion of the buccal face of 6 anterior maxillary teeth, which under ultraviolet light were compared to the dental structure. The specimens and restorations were photographed only under the illumination of an ultraviolet lamp. The photographic record was performed, with standardized parameters for all photographs (ISO 100). After visual analysis of the images by three evaluators calibrated in the in vitro study and by ten evaluators calibrated in the in vivo study, numerical values were assigned to resins without fluorescence (zero), medium fluorescence (1) and high fluorescence (2). The evaluations were submitted to the Kruskal-Wallis and Dunn test, which among the limitations of this study and according to the employed methodology, it was found that there was no statistical difference in fluorescence intensity among the composite resins evaluated, since all types of resins achieved fluorescent metamerism with dental enamel.

Composite restorations placed in non-carious cervical lesions-Which cavity preparation is clinically reliable?

The purpose of this in-vivo study was to evaluate the clinical performance of restorations placed in non-carious cervical lesions (NCCLs), using different cavity preparation designs, after 7.7 years. A total of 85 NCCLs with coronal margins in enamel and cervical margins in dentin were randomly assigned to the following treatment protocols: dentin surface cleaning, dentin surface roughening with round bur plus flowable composite, dentin surface roughening/cervical groove preparation with round bur, dentin surface roughening/cervical groove preparation with round bur plus flowable composite. After enamel beveling and selective enamel etching, the defects were restored with composite. The restorations were assessed by two independent, calibrated and blinded investigators, using modified USPHS criteria. At 7 years (7.7 (± 0.35)), a total of 64 restorations (75.3%) were available for follow-up examination. The total retention rate, irrespective of the test groups, was 82.8%. Restorations placed without any preparation showed the highest loss rate (27.8%). Esthetic appearance, marginal adaptation, anatomic form and marginal discoloration did not differ significantly between the groups. Composites are long-term stable materials for restoring NCCLs. Restorations placed without any dentin preparation (cavity cleaning only) showed the highest loss rate.

Influence of Bulk-fill Restoration on Polymerization Shrinkage Stress and Marginal Gap Formation in Class V Restorations

Clinical Relevance

Restoring Class V cavities with a regular bulk-fill composite presents a more favorable biomechanical behavior than restoring with a regular nano-filled composite.

SUMMARY

Purpose:

This study evaluated the influence of Class V cavity extension and restorative material on the marginal gap formation, before and after aging, and the theoretical polymerization shrinkage stress distribution in a tooth restoration.

Methods and Materials:

Class V cavities with the depth of 2 mm, cervical/incisal distance of 4 mm, and margins located in the enamel 1 mm above the cementoenamel junction were prepared in 60 bovine incisors in two mesiodistal dimensions (n=30): 2.9-mm large extension cavities (LE) or 1.4-mm small extension cavities (SE). The cavities' depths were validated using a periodontal probe, while the mesiodistal and cervical/incisal distances were measured using a stereomicroscope. After adhesive application (Clearfil SE Bond), each group was randomly divided into two groups (n=15) according to the restorative material: Filtek Z350 XT (N) or Filtek Bulk Fill Posterior (BF). The marginal gap formation between the tooth structure and the restorative material was evaluated using a stereomicroscope before and after thermocycling for 15,000 cycles (5°C and 55°C). Data were analyzed using repeated-measures analysis of variance (ANOVA) and Tukey test for multiple comparisons (α=0.05). A three-dimensional geometric model with the same dimensions as the experimental test was created for each cavity, and the restorations were modeled for each restorative material. In the analysis software, the finite element mesh was created with tetrahedral quadratic elements, and the polymerization shrinkage was simulated by thermal analogy. The maximum principal stress was used to express the tensile stress in the adhesive interface through colorimetric graphs.

Results:

For the marginal gap, the repeated-measures ANOVA revealed a significant effect only for the factors composite resin (df=1, F=4.09, p=0.04) and thermal aging (df=1, F=44.35, p&lt;0.001). For all numerical simulations, higher stress concentration occurred at the enamel margin, and the stress peak decreased in the following sequence: LE-N (17.0 MPa) &gt; SE-N (15.0 MPa) &gt; LE-BF (9.1 MPa) &gt; SE-BF (8.2 MPa).

Conclusion:

Marginal gaps in the specimens fell between approximately 12 and 17 μm; however, the regular bulk-fill composite showed less gap formation and better stress distribution around the cavity margin than the regular nano-filled composite, regardless of the cavity extension.

One-year clinical evaluation of bulk-fill flowable vs. regular nanofilled composite in non-carious cervical lesions

OBJECTIVE

The aim of this double-blind, randomized trial was to evaluate the 1-year clinical performance of a bulk-fill flowable and a regular nanofilled composite in non-carious cervical lesions (NCCLs).

METHODS

Twenty-two subjects with at least two NCCLs were enrolled in the study. A total of 89 restorations were performed by a single operator using Filtek Supreme (FS) Ultra Universal or Filtek Bulk (FB) Fill Flowable. A universal adhesive (Scotchbond™ Universal Adhesive) was used with a self-etching approach in dentin. The restorations were evaluated by two independent and previously calibrated examiners at baseline (7 days), 6 months and 1 year, according to the USPHS modified criteria. Mann-Whitney U test was used to analyze the differences between composites and Wilcoxon signed rank test for comparisons between the baseline and follow-ups (α = 5%).

RESULTS

One restoration was considered clinically unacceptable due to loss of retention after 6 months in the FS group. FS presented statistically high scores for surface roughness when compared to FB after 1 year (p < 0.05), but both were considered clinically acceptable. After 1 year, the frequency of clinically unacceptable rates was 3.3% for anatomical form in the FB group, 1.1% for retention in the FS group, and 2.2% for marginal adaptation in both groups. All restorations, in both groups, presented score 0 over the 1-year period for marginal staining, postoperative sensitivity, and secondary caries.

CONCLUSION

Both composite resins showed acceptable clinical performances for the restoration of NCCLs after 1 year.

CLINICAL RELEVANCE

Both bulk-fill flowable and regular nanofilled composites showed good clinical performances for the restoration of NCCLs after 1 year.