Evaluation of the biological behaviour of various dental implant abutment materials on attachment and viability of human gingival fibroblasts

Properties of New Partially Crystallized Lithium Disilicate CAD-CAM Materials

OBJECTIVE

The purpose of this study was to compare the optical, mechanical, and biological properties of two new, inexpensive lithium disilicate (LS2) materials (Lodden (LOD), LD Medical Technology; and BeautyZir (BZ), BeautyZir Technology) to a clinically established LS2 material (IPS e.max CAD (EMAX), Ivoclar Vivadent).

METHODS AND MATERIALS

The optical properties of the translucency parameter (TP) and opalescence parameter (OP) were obtained with a dental spectrophotometer. The mechanical properties of flexural strength (FS) and flexural modulus (FM) were determined through a three-point bend test conducted using a universal testing machine. Biocompatibility tests were conducted by analyzing cell proliferation using spectrophotometric absorbance (optical density) to determine relative growth rate and cytotoxicity. Representative specimens of the three LS2 materials were analyzed with X-ray diffraction to determine the relative crystalline phases. Data were analyzed with oneway ANOVA and Tukey's post hoc test (α=0.05).

RESULTS

Significant differences in optical and mechanical properties were found amongst the groups (p<0.05). Both LOD and BZ had significantly greater TP and OP compared to EMAX. EMAX and LOD had greater FS and FM than BZ. No significant differences in optical density or relative growth rate were found among any of the LS2 groups (p>0.05). EMAX and LOD had greater weight percent of lithium disilicate than BZ.

CONCLUSIONS

The new lithium disilicate LS2 material, LOD, exhibited better optical properties while maintaining mechanical and biological properties similar to the established LS2 material, EMAX.

A digital protocol for the fabrication of anatomic-contour implant zirconia crowns directly screwed on external hexagonal implant connections without the interposition of a Ti-base component

A straightforward and effective restorative option is proposed for implant-supported fixed prostheses with external connections by using monolithic zirconia without the interposition of a Ti-base component. The technique is based on a modification of the Brånemark connection used to link metal-ceramic or metal-composite resin restorations directly to the implant.

Analysis of the efficacy of two kinds of loss restoration of posterior teeth using 3D printing temporary crown during the second phase of implant surgery

BACKGROUND

This study aimed to analyze the effect of 3D printing temporary crowns on the single and continuous loss restoration of posterior teeth during secondary implant surgery.

METHODS

This study adopted a single-center, randomized, single-blind, parallel-controlled trial design. Thirty patients who were admitted to the Department of Stomatology, Affiliated Hospital of Jiangnan University between January 2020 and February 2023 and who had >2 consecutive missing posterior teeth were implanted with the same implant system. A simple random method was adopted to assign 30 patients to group A (using 3D-printed temporary crowns) and group B (control group) in a 1:1 ratio, with 15 patients in each group. The final prosthesis in Experimental group A was done based on the adjustment of the temporary crown and tooth. Both groups were compared based on total time, accuracy, and patient satisfaction of the final prosthesis. Additionally, 30 patients who had undergone single posterior tooth implantation during the same period were selected as the study objects and divided into 2 groups using the random comparison table method. The patients in the experimental group C (15 cases) were provided with 3D-printed temporary crowns, and the other 15 patients were assigned to the control group D (15 cases).

RESULTS

In the experimental group A, the total time spent on dentures was 10.1 ± 1.3 minutes, which was lesser compared with that spent in the control group B (P < .05). Experimental group A exhibited a significantly higher accuracy of prosthesis (P < .05), as well as significantly higher satisfaction of patients (P < .05). Regarding the food impaction rate, after formal implantation and restoration, the food impaction rate of the experimental group C at 1 month and 6 months was compared with that of the traditional 2-stage surgery group D.

CONCLUSION

Three-dimensional printing temporary crowns exhibited significantly better therapeutic effects for restoration in patients with continuous missing implants in posterior teeth. 3D printing temporary crowns in patients with single posterior tooth implant restoration showed promising results, which improved food immobilization and actively and effectively reduced the complications associated with a single posterior tooth implant.

Inflammatory and adhesion profile of gingival fibroblasts to lithium disilicate ceramic surfaces

OBJECTIVES

Lithium disilicate (LS) ceramic emerges as a compelling option for customized implant abutments. However, ensuring its safety and reliability requires clarification on key aspects, notably its impact on inflammation and potential for cell adhesion. This study delves into these considerations, examining the influence of LS ceramic on cytokine release and the transcriptional profile of human gingival fibroblasts (hGFs) in direct contact with various LS surfaces.

METHODS

hGFs were cultured on LS disks featuring three distinct surfaces (unpolished, polished, and polished glaze), while titanium disks served as reference material and cells cultured directly on plates as controls. The surface of the disks was analyzed using a scanning electron microscope. The cell metabolism was analyzed by MTT test, cytokine release by MAGPIX and the expression of genes related to cell adhesion was evaluated by qPCR.

RESULTS

The disks exhibited similar topography with smooth surfaces, except for the unpolished LS disks, which had an irregular surface. Contact with LS surfaces did not substantially reduce cell metabolism. Moreover, it generally decreased cytokine release compared to controls, particularly pro-inflammatory mediators like IL-1β, IL-6, and TNF-α. Significantly increased expression of genes related to cell adhesion to LS was observed, comparable to titanium, the gold standard material for implant abutments.

SIGNIFICANCE

This study unveils that LS ceramic not only fails to trigger pro-inflammatory cytokine release, but also significantly enhances gene expression associated with cell adhesion. These mechanisms are closely linked to gene pathways such as PTK2, SRC, MAPK1, and transcription factors ELK-1 and MYC. In summary, the findings underscore LS ceramic's potential as a biocompatible material for implant abutments, shedding light on its favorable inflammatory response and enhanced cell adhesion properties.

Human gingival fibroblast response on zirconia and titanium implant abutment: A systematic review

PURPOSE

The peri-implant region, where restoration interfaces with mucosal tissue, plays an essential role in overall implant success and is just as important as osseointegration. The implant abutment materials are in intimate contact with human gingival fibroblasts (HGFs). This study compares the proliferation of HGFs between zirconia and titanium abutments used in dental implants.

METHODS

An electronic search was performed using PubMed, EMBASE, and Web of Science databases. English articles based on in vitro studies testing HGFs proliferation on zirconia and titanium implant abutment materials were included. A quality assessment of the selected study was performed using the web-based Science in Risk Assessment and Policy (SciRAP) tool. The HGFs proliferation and cellular morphology tests on zirconia and titanium materials from the included studies were summarized, exploring the role of material surface characteristics.

RESULTS

The electronic search yielded 401 studies, of which 17 were selected for inclusion. Zirconia exhibited comparable or superior efficacy in promoting the proliferation of HGFs compared to titanium. Observations on cellular morphology showed similar outcomes for both materials. Establishing a definitive relationship between contact angle, surface roughness, and their influence on cellular response remains challenging due to the varied methodological approaches in the reviewed studies.

CONCLUSION

Based on the findings of this systematic review, zirconia shows comparable reliability to titanium as an abutment material for HGFs proliferation, with comparable or superior HGFs proliferative outcomes.

Biological Response of the Peri-Implant Mucosa to Different Definitive Implant Rehabilitation Materials

BACKGROUND

Sealing the peri-implant tissue is a determining factor for long-term implant survival. In the transmucosal region, the cervical fraction of the prosthetic crown is in contact with these tissues, so mucointegration will also be influenced by the biomaterial used for the prosthetic restoration. This study aims to compare the tissue response generated by definitive restorative materials and polymeric materials from a histological point of view.

METHODS

This study performed an observational prospective cohort study in which biopsies of the peri-implant mucosa were taken after placement of implant-supported prosthetic restorations made of different materials (zirconium oxide, lithium disilicate, and PMMA).

RESULTS

A statistically significant difference was observed in the increase in the thickness of the non-keratinized epithelium when comparing the definitive materials (zirconium oxide/lithium disilicate) vs. the provisional material (PMMA) and in the number of collagen fibers when comparing zirconium oxide and lithium disilicate.

CONCLUSIONS

This study found that zirconia is the material that presents the most adequate biological response of peri-implant tissues. It shows a lower intensity of inflammatory cellular content, a total normality in the number of collagen fibers (the arrangement of the fibers is normal in 90% of the cases), and vascular proliferation of connective tissue in 83% of the cases. These parameters make it a material with a predictable response. Similarly, only the following slight statistically significant differences between the definitive and provisional materials are observed, indicating that the biological response generated by the provisional material (PMMA) is not very different from that obtained with the placement of the definitive restoration.

Advancing 3D Dental Implant Finite Element Analysis: Incorporating Biomimetic Trabecular Bone with Varied Pore Sizes in Voronoi Lattices

The human mandible's cancellous bone, which is characterized by its unique porosity and directional sensitivity to external forces, is crucial for sustaining biting stress. Traditional computer- aided design (CAD) models fail to fully represent the bone's anisotropic structure and thus depend on simple isotropic assumptions. For our research, we use the latest versions of nTOP 4.17.3 and Creo Parametric 8.0 software to make biomimetic Voronoi lattice models that accurately reflect the complex geometry and mechanical properties of trabecular bone. The porosity of human cancellous bone is accurately modeled in this work using biomimetic Voronoi lattice models. The porosities range from 70% to 95%, which can be achieved by changing the pore sizes to 1.0 mm, 1.5 mm, 2.0 mm, and 2.5 mm. Finite element analysis (FEA) was used to examine the displacements, stresses, and strains acting on dental implants with a buttress thread, abutment, retaining screw, and biting load surface. The results show that the Voronoi model accurately depicts the complex anatomy of the trabecular bone in the human jaw, compared to standard solid block models. The ideal pore size for biomimetic Voronoi lattice trabecular bone models is 2 mm, taking in to account both the von Mises stress distribution over the dental implant, screw retention, cortical bone, cancellous bone, and micromotions. This pore size displayed balanced performance by successfully matching natural bone's mechanical characteristics. Advanced FEA improves the biomechanical understanding of how bones and implants interact by creating more accurate models of biological problems and dynamic loading situations. This makes biomechanical engineering better.

Gingival fibroblast response to (hybrid) ceramic implant reconstruction surfaces is modulated by biomaterial type and surface treatment

OBJECTIVES

Surface characteristics of implant reconstructions determine the gingival fibroblast (GF) response and thus soft tissue integration (STI). However, for monolithic implant reconstructions it is unknown whether the (hybrid) ceramic biomaterial type and its surface treatment affect GF response. Therefore, this investigation examined the influence of the implant reconstruction biomaterials hybrid ceramic (HC), lithium disilicate ceramic (LS), 4 and 5 mol% yttria partially stabilized zirconiumdioxide ceramics (4/5Y-PSZ) and their surface treatment - machining, polishing or glazing - on surface characteristics and GF response.

METHODS

After characterization of surface topography and wettability by scanning electron microscopy, interferometry and contact angle measurement, the adhesion, morphology, metabolic activity and proliferation of GFs from six donors was investigated by fluorescent staining and a resazurin-based assay at days 1, 3 and 7. Titanium (Ti) served as control.

RESULTS

Biomaterial type and surface treatment affected the GF response in a topography-dependent manner. Smooth polished and glazed surfaces demonstrated enhanced GF adhesion and earlier proliferation onset compared to rough machined surfaces. Due to minor differences in surface topography of polished and glazed surfaces, however, the GF response was similar for polished and glazed HC, LS, 4- and 5Y-PSZ as well as Ti.

SIGNIFICANCE

Within the limits of the present investigation, polishing and glazing of machined HC, LS and 4/5Y-PSZ can be recommended to support STI-relevant cell functions in GF. Since the GF response on polished and glazed HC, LS, 4- and 5Y-PSZ surfaces and the Ti control was comparable, this investigation proofed equal cytocompatibility of these surfaces in vitro.

3D printed zirconia used as dental materials: a critical review

In view of its high mechanical performance, outstanding aesthetic qualities, and biological stability, zirconia has been widely used in the fields of dentistry. Due to its potential to produce suitable advanced configurations and structures for a number of medical applications, especially personalized created devices, ceramic additive manufacturing (AM) has been attracting a great deal of attention in recent years. AM zirconia hews out infinite possibilities that are otherwise barely possible with traditional processes thanks to its freedom and efficiency. In the review, AM zirconia's physical and adhesive characteristics, accuracy, biocompatibility, as well as their clinical applications have been reviewed. Here, we highlight the accuracy and biocompatibility of 3D printed zirconia. Also, current obstacles and a forecast of AM zirconia for its development and improvement have been covered. In summary, this review offers a description of the basic characteristics of AM zirconia materials intended for oral medicine. Furthermore, it provides a generally novel and fundamental basis for the utilization of 3D printed zirconia in dentistry.

The effect of frontal trauma on the edentulous mandible with four different interforaminal implant-prosthodontic anchoring configurations. A 3D finite element analysis

PURPOSE

The present three-dimensional (3D) finite element analysis (FEA) was aimed to assess the biomechanical effects and fracture risks of four different interforaminal implant-prosthodontic anchoring configurations exposed to frontal trauma.

MATERIAL AND METHODS

A symphyseal frontal trauma of 1 MPa was applied to four dental implant models with different configurations (two unsplinted interforaminal implants [2IF-U], two splinted interforaminal implants [2IF-S], four unsplinted interforaminal implants[ 4IF-U], four splinted interforaminal implants [4IF-S]. By using a 3D-FEA analysis the effective cortical bone stress values were evaluated in four defined regions of interest (ROI) (ROI 1: symphyseal area; ROI 2: preforaminal area; ROI 3: mental foraminal area; and ROI 4: condylar neck) followed by a subsequent intermodel comparison.

RESULTS

In all models the frontal traumatic force application revealed the highest stress values in the condylar neck region. In both models with a four-implant configuration (4IF-U, 4IF-S), the stress values in the median mandibular body (ROI 1) and in the condylar neck region (ROI 4) were significantly reduced (P <0.01) compared with the two-implant models (2IF-U, 2IF-S). However, in ROI 1, the model with four splinted implants (4IF-S) showed significantly (P < 0.01) reduced stress values compared to the unsplinted model (4IF-U). In addition, all models showed increased stress patterns in the area adjacent to the posterior implants, which is represented by increased stress values for both 2IF-U and 2IF-S in the preforaminal area (ROI 3) and for the four implant-based models (4IF-U, 4IF-S) in the mental foraminal area.

CONCLUSION

The configuration of four splinted interforaminal implants showed the most beneficial distribution of stress pattern representing reduced stress distribution and associated reduced fracture risk in anterior symphysis, condylar neck and preforaminal region.

Effects of ultraviolet weathering aging on the color stability and biocompatibility of various computer-aided design and computer-aided manufacturing glass-ceramic materials

OBJECTIVES

This study assessed the changes in color stability and biocompatibility of computer-aided design and computer-aided manufacturing (CAD-CAM) glass-ceramics after ultraviolet weathering (UW) aging.

METHODS

A total of 300 plate-shaped specimens (12.0 × 14.0 × 1.5 mm3) were prepared using a leucite-reinforced glass-ceramic (IPS Empress CAD; E), a lithium disilicate (IPS e.max CAD; M), and two zirconia-reinforced lithium silicate (Celtra Duo; C, Vita Suprinity; V) glass-ceramics. Specimens were divided into three groups (n = 25, each), subjected to water storage at 37 °C for 24 h (control group), or UW aging at 150 kJ/m2 (first-aged group) or 300 kJ/m2 (second-aged group). The color stability, mechanical and surface properties, and biocompatibility of the CAD-CAM glass-ceramics were investigated experimentally, followed by statistical analysis.

RESULTS

The brightness and redness or greenness were reduced in all groups after aging. After the first aging, V exhibited the largest color change and E exhibited the smallest color change. After the second aging, E exhibited the highest nanoindentation hardness and Young's modulus. The surface roughness was the highest for V after the first aging. Furthermore, the hydrophilicity of the materials increased after aging process. The cell proliferation/viability of human gingival fibroblasts was the highest in E before and after aging. Almost all cells survived for all groups based on a live/dead assay.

CONCLUSIONS

Leucite-reinforced glass-ceramic exhibit the highest color stability and biocompatibility after aging. The color stability and biocompatibility of CAD-CAM glass-ceramics depend on the aging process and material type.

CLINICAL SIGNIFICANCE

Various CAD-CAM glass-ceramics exhibit adequate color stability after UW aging. The leucite-reinforced glass-ceramics exhibit the highest color stability, cell proliferation, and viability after aging. The color stability, mechanical and surface properties, and biocompatibility of the glass-ceramics depend on the aging process and material type.

Vacuum Ultraviolet (VUV) Light Photofunctionalization to Induce Human Oral Fibroblast Transmigration on Zirconia

Soft tissue adhesion and sealing around dental and maxillofacial implants, related prosthetic components, and crowns are a clinical imperative to prevent adverse outcomes of periodontitis and periimplantitis. Zirconia is often used to fabricate implant components and crowns. Here, we hypothesized that UV treatment of zirconia would induce unique behaviors in fibroblasts that favor the establishment of a soft tissue seal. Human oral fibroblasts were cultured on zirconia specimens to confluency before placing a second zirconia specimen (either untreated or treated with one minute of 172 nm vacuum UV (VUV) light) next to the first specimen separated by a gap of 150 µm. After seven days of culture, fibroblasts only transmigrated onto VUV-treated zirconia, forming a 2.36 mm volume zone and 5.30 mm leading edge. Cells migrating on VUV-treated zirconia were enlarged, with robust formation of multidirectional cytoplastic projections, even on day seven. Fibroblasts were also cultured on horizontally placed and 45° and 60° tilted zirconia specimens, with the latter configurations compromising initial attachment and proliferation. However, VUV treatment of zirconia mitigated the negative impact of tilting, with higher tilt angles increasing the difference in cellular behavior between control and VUV-treated specimens. Fibroblast size, perimeter, and diameter on day seven were greater than on day one exclusively on VUV-treated zirconia. VUV treatment reduced surface elemental carbon and induced superhydrophilicity, confirming the removal of the hydrocarbon pellicle. Similar effects of VUV treatment were observed on glazed zirconia specimens with silica surfaces. One-minute VUV photofunctionalization of zirconia and silica therefore promotes human oral fibroblast attachment and proliferation, especially under challenging culture conditions, and induces specimen-to-specimen transmigration and sustainable photofunctionalization for at least seven days.

Effects of abutment materials on peri-implant soft tissue health and stability: A network meta-analysis

PURPOSE

This systematic review aimed to evaluate the effect of the abutment material on peri-implant soft tissue health and stability.

STUDY SELECTION

An electronic and hand search was conducted until February 2022. Only prospective randomized trials (RCTs) and controlled clinical trials (CCTs) comparing titanium abutments with abutments made of different materials, with a follow-up of at least 6 months, were selected by two independent reviewers. Data on marginal bone loss (MBL) and peri-implant tissue indexes, i.e., plaque index (PI), bleeding on probing (BOP), probing depth (PD), and recession (REC), were collected. The risk of bias for RCTs and non-RCTs was evaluated according to the tool reported in the Cochrane Handbook for Systematic Reviews of Interventions and the ROBINS-I tool, respectively. Both pairwise and network meta-analyses (NMA) were performed.

RESULTS

We included 18 relevant studies from 1,437 identified studies. Overall, 612 patients were treated, and 848 abutments were inserted. Five studies presented a low risk of bias. Pairwise meta-analysis showed that, as compared to titanium, zirconia abutments presented a significantly reduced MBL (0.20 mm, 95% Confidence Interval CI [0.14-0.26], P < 0.00001). No significant differences were found for the other outcomes. In the NMA, zirconia abutments demonstrated an 83.3% probability of achieving the highest rank in PI, an 87.0% in BOP, and a 65.0% in PD outcome, suggesting that zirconia abutments generally performed better than titanium and alumina abutments.

CONCLUSIONS

Within the limits of the present study, zirconia abutments seem a viable alternative to titanium ones.

Piranha-etched titanium nanostructure reduces biofilm formation in vitro

OBJECTIVES

Nano-modified surfaces for dental implants may improve gingival fibroblast adhesion and antibacterial characteristics through cell-surface interactions. The present study investigated how a nanocavity titanium surface impacts the viability and adhesion of human gingival fibroblasts (HGF-1) and compared its response to Porphyromonas gingivalis with those of marketed implant surfaces.

MATERIAL AND METHODS

Commercial titanium and zirconia disks, namely, sandblasted and acid-etched titanium (SLA), sandblasted and acid-etched zirconia (ZLA), polished titanium (PT) and polished zirconia (ZrP), and nanostructured disks (NTDs) were tested. Polished titanium disks were etched with a 1:1 combination of 98% H2SO4 and 30% H2O2 (piranha etching) for 5 h at room temperature to produce the NTDs. Atomic force microscopy was used to measure the surface topography, roughness, adhesion force, and work of adhesion. MTT assays and immunofluorescence staining were used to examine cell viability and adhesion after incubation of HGF-1 cells on the disk surfaces. After incubation with P. gingivalis, conventional culture, live/dead staining, and SEM were used to determine the antibacterial properties of NTD, SLA, ZLA, PT, and ZrP.

RESULTS

Etching created nanocavities with 10-20-nm edge-to-edge diameters. Chemical etching increased the average surface roughness and decreased the surface adherence, while polishing and flattening of ZrP increased adhesion. However, only the NTDs inhibited biofilm formation and bacterial adherence. The NTDs showed antibacterial effects and P. gingivalis vitality reductions. The HGF-1 cells demonstrated greater viability on the NTDs compared to the controls.

CONCLUSION

Nanocavities with 10-20-nm edge-to-edge diameters on titanium disks hindered P. gingivalis adhesion and supported the adhesion of gingival fibroblasts when compared to the surfaces of currently marketed titanium or zirconia dental implants.

CLINICAL RELEVANCE

This study prepared an effective antibacterial nanoporous surface, assessed its effects against oral pathogens, and demonstrated that surface characteristics on a nanoscale level influenced oral pathogens and gingival fibroblasts.

CLINICAL TRIAL REGISTRATION

not applicable.

Trans-mucosal platforms for dental implants: Strategies to induce muco-integration and shield peri-implant diseases

OBJECTIVES

Trans-mucosal platforms connecting the bone-anchored implants to the prosthetic teeth are essential for the success of oral rehabilitation in implant dentistry. This region promotes a challenging environment for the successfulness of dental components due to the transitional characteristics between soft and hard tissues, the presence of bacteria, and mechanical forces. This review explored the most current approaches to modify trans-mucosal components in terms of macro-design and surface properties.

METHODS

This critical review article revised intensely the literature until July 2023 to demonstrate, discuss, and summarize the current knowledge about marketable and innovative trans-mucosal components for dental implants.

RESULTS

A large number of dental implant brands have promoted the development of several implant-abutment designs in the clinical market. The progress of abutment designs shows an optimistic reduction of bacteria colonization underlying the implant-abutment gap, although, not completely inhibited. Fundamental and preclinical studies have demonstrated promising outcomes for altered-surface properties targeting antibacterial properties and soft tissue sealing. Nanotopographies, biomimetic coatings, and antibiotic-release properties have been shown to be able to modulate, align, orient soft tissue cells, and induce a reduction in biofilm formation, suggesting superior abilities compared to the current trans-mucosal platforms available on the market.

SIGNIFICANCE

Future clinical implant-abutments show the possibility to reduce peri-implant diseases and fortify soft tissue interaction with the implant-substrate, defending the implant system from bacteria invasion. However, the absence of technologies translated to commercial stages reveals the need for findings to "bridge the gap" between scientific evidences published and applied science in the industry.

The integration of peri-implant soft tissues around zirconia abutments: Challenges and strategies

Stable soft tissue integration around the implant abutment attenuates pathogen penetration, protects underlying bone tissue, prevents peri-implantitis and is essential in maintaining long-term implant stability. The desire for "metal free" and "aesthetic restoration" has favored zirconia over titanium abutments, especially for implant restorations in the anterior region and for patients with thin gingival biotype. Soft tissue attachment to the zirconia abutment surface remains a challenge. A comprehensive review of advances in zirconia surface treatment (micro-design) and structural design (macro-design) affecting soft tissue attachment is presented and strategies and research directions are discussed. Soft tissue models for abutment research are described. Guidelines for development of zirconia abutment surfaces that promote soft tissue integration and evidence-based references to inform clinical choice of abutment structure and postoperative maintenance are presented.

Current surface modification strategies to improve the binding efficiency of emerging biomaterial polyetheretherketone (PEEK) with bone and soft tissue: A literature review

PURPOSE

The aim of this study was to review the literature on current surface modification strategies used to improve the binding efficiency of an emerging biological material, polyetheretherketone (PEEK), with bone and soft tissues.

STUDY SELECTION

This review was based on articles retrieved from PubMed, Google Scholar, Web of Science, and ScienceDirect databases. The main keywords used during the search were "polyetheretherketone (PEEK)," "implant," "surface modification," "biomaterials," "bone," "osseointegration," and "soft tissue."

RESULTS

The suitability of PEEK surface modification strategies has been critically analyzed and summarized here. Many cell and in vivo experiments in small animals have shown that the use of advanced modification technologies with appropriate surface modification strategies can effectively improve the surface inertness of PEEK, thereby improving its binding efficiency with bone and soft tissues.

CONCLUSIONS

Surface modifications of PEEK have revealed new possibilities for implant treatment; however, most results are based on in vitro or short-term in vivo evaluations in small animals. To achieve a broad application of PEEK in the field of oral implantology, more in vivo experiments and long-term clinical evaluations are needed to investigate the effects of various surface modifications on the tissue integration ability of PEEK to develop an ideal implant material.

Improving Pure Titanium's Biological and Mechanical Characteristics through ECAP and Micro-Arc Oxidation Processes

Pure titanium is limited to be used in biomedical applications due to its lower mechanical strength compared to its alloy counterpart. To enhance its properties and improve medical implants feasibility, advancements in titanium processing technologies are necessary. One such technique is equal-channel angular pressing (ECAP) for its severe plastic deformation (SPD). This study aims to surface modify commercially pure titanium using micro-arc oxidation (MAO) or plasma electrolytic oxidation (PEO) technologies, and mineral solutions containing Ca and P. The composition, metallography, and shape of the changed surface were characterized using X-ray diffraction (XRD), digital optical microscopy (OM), and scanning electron microscope (SEM), respectively. A microhardness test is conducted to assess each sample's mechanical strength. The weight % of Ca and P in the coating was determined using energy dispersive spectroscopy (EDS), and the corrosion resistance was evaluated through potentiodynamic measurement. The behavior of human dental pulp cell and periodontal cell behavior was also studied through a biomedical experiment over a period of 1-, 3-, and 7-days using culture medium, and the cell death and viability can be inferred with the help of enzyme-linked immunosorbent assay (ELISA) since it can detect proteins or biomarkers secreted by cells undergoing apoptosis or necrosis. This study shows that the mechanical grain refinement method and surface modification might improve the mechanical and biomechanical properties of commercially pure (CP) titanium. According to the results of the corrosion loss measurements, 2PassMAO had the lowest corrosion rate, which is determined to be 0.495 mmpy. The electrode potentials for the 1-pass and 2-pass coated samples are 1.44 V and 1.47 V, respectively. This suggests that the coating is highly effective in reducing the corrosion rate of the metallic CP Ti sample. Changes in the grain size and the presence of a high number of grain boundaries have a significant impact on the corrosion resistance of CP Ti. For ECAPED and surface-modified titanium samples in a 3.6% NaCl electrolyte solution, electrochemical impedance spectroscopy (EIS) properties are similar to Nyquist and Bode plot fitting. In light of ISO 10993-5 guidelines for assessing in vitro cytotoxicity, this study contributes valuable insights into pulp and periodontal cell behavior, focusing specifically on material cytotoxicity, a critical factor determined by a 30% decrease in cell viability.

Enhancing cell adhesive and antibacterial activities of glass-fibre-reinforced polyetherketoneketone through Mg and Ag PIII

Glass-fibre-reinforced polyetherketoneketone (PEKK-GF) shows great potential for application as a dental implant restoration material; however, its surface bioinertness and poor antibacterial properties limit its integration with peri-implant soft tissue, which is critical in the long-term success of implant restoration. Herein, functional magnesium (Mg) and silver (Ag) ions were introduced into PEKK-GF by plasma immersion ion implantation (PIII). Surface characterization confirmed that the surface morphology of PEKK-GF was not visibly affected by PIII treatment. Further tests revealed that PIII changed the wettability and electrochemical environment of the PEKK-GF surface and enabled the release of Mg²⁺ and Ag⁺ modulated by Giavanni effect. In vitro experiments showed that Mg/Ag PIII-treated PEKK-GF promoted the proliferation and adhesion of human gingival fibroblasts and upregulated the expression of adhesion-related genes and proteins. In addition, the treated samples inhibited the metabolic viability and adhesion of Streptococcus mutans and Porphyromonas gingivalis on their surfaces, distorting bacterial morphology. Mg/Ag PIII surface treatment improved the soft tissue integration and antibacterial activities of PEKK-GF, which will further support and broaden its adoption in dentistry.

Cell Type-Specific Effects of Implant Provisional Restoration Materials on the Growth and Function of Human Fibroblasts and Osteoblasts

Implant provisional restorations should ideally be nontoxic to the contacting and adjacent tissues, create anatomical and biophysiological stability, and establish a soft tissue seal through interactions between prosthesis, soft tissue, and alveolar bone. However, there is a lack of robust, systematic, and fundamental data to inform clinical decision making. Here we systematically explored the biocompatibility of fibroblasts and osteoblasts in direct contact with, or close proximity to, provisional restoration materials. Human gingival fibroblasts and osteoblasts were cultured on the "contact" effect and around the "proximity" effect with various provisional materials: bis-acrylic, composite, self-curing acrylic, and milled acrylic, with titanium alloy as a bioinert control. The number of fibroblasts and osteoblasts surviving and attaching to and around the materials varied considerably depending on the material, with milled acrylic the most biocompatible and similar to titanium alloy, followed by self-curing acrylic and little to no attachment on or around bis-acrylic and composite materials. Milled and self-curing acrylics similarly favored subsequent cellular proliferation and physiological functions such as collagen production in fibroblasts and alkaline phosphatase activity in osteoblasts. Neither fibroblasts nor osteoblasts showed a functional phenotype when cultured with bis-acrylic or composite. By calculating a biocompatibility index for each material, we established that fibroblasts were more resistant to the cytotoxicity induced by most materials in direct contact, however, the osteoblasts were more resistant when the materials were in close proximity. In conclusion, there was a wide variation in the cytotoxicity of implant provisional restoration materials ranging from lethal and tolerant to near inert, and this cytotoxicity may be received differently between the different cell types and depending on their physical interrelationships.

Physical and biological implications of accelerated aging on stereolithographic additive-manufactured zirconia for dental implant abutment

PURPOSE

This study aimed to comparatively investigate the effects of accelerated aging on the physical and biological features of zirconia manufactured by digital light processing (DLP) and conventional subtractive manufacturing (SM) with similar composition.

METHODS

Both the DLP- and SM-fabricated zirconia samples (7 mm × 7.5 mm × 1.5 mm) were grouped according to aging (134 °C, 0.2 MPa, 100% humidity) times, including 0 h, 5 h, and 10 h. Phase assemblage and surface topography of zirconia manufactured by different technologies were evaluated before and after aging. The biological effects of zirconia on human gingival fibroblast (HGF) cell events, including cell viability, proliferation, morphology and adhesion, were also evaluated by live/dead viability assay, cck-8 assay, scanning electron microscopy and confocal laser scanning microscopy respectively.

RESULTS

The DLP-fabricated zirconia showed a higher initial cubic phase content and rate of phase transformation than the SM-fabricated zirconia. Among the different aging time-based groups, the 5 h-aged group exhibited significantly lower sub-micron scale surface roughness compared with the other groups. Aging did not significantly alter cellular behavior in any zirconia type, except for minor changes in adhesive cell numbers recorded in an aging time/culturing time-dependent manner. In addition to small differences in cell alignment patterns and overall cell morphology, the two zirconia types presented comparable biological performance before and after aging.

CONCLUSION

Although the microstructure and surface characteristics of DLP-fabricated zirconia can be affected by autoclave aging, this newly manufactured zirconia is likely to maintain desirable long-term biocompatibility as an implant abutment material.

Dental Implant Treatment in Patients Suffering from Oral Lichen Planus: A Narrative Review

BACKGROUND

The aim of this study was to describe the complications and survival rates of dental implants placed in patients suffering from oral lichen planus (OLP) and to present recommendations for implant treatment in this group of patients through a narrative review of the published studies.

METHODS

A search of the literature was conducted using four databases: PubMed/Medline, Web of Science, Cochrane, and Scopus with a stop date of May 2022.

RESULTS

Eighteen studies were evaluated. The results showed that dental implant survival rates in patients with OLP were similar to those reported in the general population. Moreover, the existing literature seemed to imply that OLP is not a suspected risk factor for peri-implant diseases. However, patients suffering from erosive forms of OLP or desquamative gingivitis and poor oral hygiene were more susceptible to developing peri-implant diseases; in addition, oral squamous cell carcinoma was observed in a few cases of OLP.

CONCLUSION

With the limitations of this narrative review, dental implants may be regarded as a safe and feasible therapeutic approach to the treatment of patients with well-controlled OLP. These patients should be monitored carefully during follow-up care. Well-designed prospective trials are required to validate the present findings.

Integration of collagen fibers in connective tissue with dental implant in the transmucosal region

Dental implants have been widely accepted as an ideal therapy to replace the missing teeth for its good performance in aspects of mechanical properties and aesthetic outcomes. Its restorative success is contributed by not only the successful osseointegration of the implant but also the tight soft tissue integration, especially the collagen fibers, in the transmucosal region. Soft tissue attaching to the dental implant/abutment is overall similar, but in some aspects distinct with that seen around natural teeth and soft tissue integration can be enhanced via several surface modification methods. This review is going to focus on the current knowledge of the transmucosal zone around the dental implants (compared with natural teeth), and latest strategies in use to fine-tune the collagen fibers assembly in the connective tissue, in an attempt to enhance soft tissue integration.

Novel Titanium Nanospike Structure Using Low-Energy Helium Ion Bombardment for the Transgingival Part of a Dental Implant

AIM(S)

The aim of the study was to fabricate a nanospike surface on a titanium alloy surface using a newly established method of low-energy helium ion bombardment. Various methods to achieve nanospike formation on titanium have been introduced recently, and their antibacterial properties have been mainly investigated with respect to Escherichia coli and Staphylococcus aureus. Oral pathogens such as Porphyromonas gingivalis play an important role in the development of peri-implantitis. For that reason, the antibacterial properties of the novel, nanostructured titanium surface against P. gingivalis were assessed, and a possible effect on the viability of gingival fibroblasts was evaluated.

MATERIALS AND METHODS

Helium sputtering was employed for developing titanium surfaces with nanospikes of 500 nm (ND) in height; commercially available smooth-machined (MD) and sandblasted and acid-etched titanium disks (SLA) were used as controls. Surface structure characterization was performed through scanning electron microscopy (SEM) and atomic force microscopy (AFM). Following incubation with P. gingivalis, antibacterial properties were determined via conventional culturing and SEM. Additionally, the viability of human gingival fibroblasts (HGFs) was tested through MTT assay, and cell morphology was assessed through SEM.

RESULTS

SEM images confirmed the successful establishment of a nanospike surface with required heights, albeit with heterogeneity. AFM images of the 500 nm nanospike surface revealed that the roughness is dominated by large-scale hills and valleys. For frame sizes of 5 × 5 μm and smaller, the average roughness is dominated by the height of the titanium spikes. ND successfully induces dysmorphisms within P. gingivalis cultures following the incubation period, while conventional culturing reveals a 17% and 20% reduction for ND compared to MD and SLA, respectively. Moreover, the nanospike surfaces did not affect the viability of human growth fibroblasts despite their sharp surface.

CONCLUSION(S)

This study successfully developed a novel titanium-nanospike-based structuration technique for titanium surfaces. In addition, the nanospikes did not hinder gingival fibroblast viability. Enhanced antimicrobial effects for such a novel nanospike-based resurfacing technique can be achieved through further optimizations for nanospike spacing and height parameters.

A Review on CAD/CAM Yttria-Stabilized Tetragonal Zirconia Polycrystal (Y-TZP) and Polymethyl Methacrylate (PMMA) and Their Biological Behavior

Yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) and polymethyl methacrylate (PMMA) are used very often in dentistry. Y-TZP is the most widely used zirconia dental ceramic, and PMMA has classically been used in removable prosthesis manufacturing. Both types of materials are commercialized in CAD/CAM system blocks and represent alternatives for long-lasting temporary (PMMA) or definitive (Y-TZP) implantological abutments. The aim of the present work is to reveal that human gingival fibroblasts (HGFs) have a favorable response when they are in contact with Y-TZP or PMMA as a dental implant abutment or implant-supported fixed prosthesis, and also to review their principal characteristics. We conducted an electronic search in the PubMed database. From an initial search of more than 32,000 articles, the application of filters reduced this number to 5104. After reading the abstracts and titles, we reduced the eligible articles to 23. Ultimately, we have included eight articles in this review.

Laser Structured Dental Zirconium for Soft Tissue Cell Occupation—Importance of Wettability Modulation

Various approaches are being pursued to physico-chemically modify the zirconia neck region of dental implants to improve the integration into the surrounding soft tissue. In this study, polished zirconia discs were laser microstructured with periodic cavities and convex waves. These zirconia samples were additionally activated by argon plasma using the kINPen^®09. The surface topography was characterized by scanning electron microscopy and the surface wettability by water contact angle. The in vitro study with human gingival fibroblasts (HGF-1) was focused on cell spreading, morphology, and actin cytoskeleton organization within the first 24 h. The laser-induced microstructures were originally hydrophobic (e.g., 60 µm cavities 138.4°), but after argon plasma activation, the surfaces switched to the hydrophilic state (60 µm cavities 13.7°). HGF-1 cells adhered flatly on the polished zirconia. Spreading is hampered on cavity structures, and cells avoid the holes. However, cells on laser-induced waves spread well. Interestingly, argon plasma activation for only 1 min promoted adhesion and spreading of HGF-1 cells even after 2 h cultivation. The cells crawl and grow into the depth of the cavities. Thus, a combination of both laser microstructuring and argon plasma activation of zirconia seems to be optimal for a strong gingival cell attachment.

Cellular properties of human gingival fibroblasts on novel and conventional implant-abutment materials

OBJECTIVES

To characterize human-gingival-fibroblast-(HGFs) viability, proliferation and adhesion on polymer-infiltrated-ceramic-network-(PICN), polyetheretherketone-(PEEK), hydroxyapatite-reinforced-polyetheretherketone-(HA-PEEK), polyetherketoneketone-(PEKK), as well as conventional titanium-(Ti) and zirconia ceramic-(Zr) implant materials in-vitro.

METHODS

Six materials (n = 40/group, 240 specimens) were standardized for surface roughness, assessed employing water contact angle measurements (WCA) and loaded with HGFs. HGF viability and proliferation were assessed at 24 and 72 h. Cell adhesion strength was evaluated after 24 h exposure to lateral shear forces using a shaking-device at 320 and 560-rpm.and qualitatively tested by scanning-electron-microscopy-(SEM) at 3, 24 and 72 h.

RESULTS

PICN demonstrated the lowest mean WCA (48.2 ± 6.3º), followed by Zr (73.8 ± 5.1º), while HA-PEEK showed the highest WCA (87.2 ± 1.5º; p ≤ 0.05). After 24 h, Zr showed the highest mean HGFs-viability rate (88 ± 14%), while PEKK showed the lowest one (78 ± 7%). At 72 h, Zr continued to show the highest HGF-viability (80 ± 6%) compared to PEKK (67.5 ± 6%) and PEEK (67%±5). SEM did not reveal differences between different materials with respect to cell attachment at 3, 24 or 72 h. At 320 rpm shaking, HGFs showed to be best attached to PICN (mean%-of-detached-cells ± SD; 26 ± 11%) and worst to PEEK (54 ± 18%). At 560 rpm shaking, Zr showed the least detached cells (32 ± 4%), while HA-PEEK revealed the highest number of detached cells (58 ± 3%; ANOVA/Tukey-post-hoc-test, differences not statistically significant).

SIGNIFICANCE

Dental implant abutment materials and their wettability strongly affect HGF proliferation and adhesion properties. Although, PICN showed the best wettability properties, Zr exhibited the strongest adhesion strength at high shaking. Within the current study's limitations, Zr remains the most biocompatible abutment material.

Nonthermal Plasma Brush Treatment on Titanium and Zirconia To Improve Periabutment Epithelium Formation

The peri-implant soft tissue with inferior adhesion takes a long healing period to form, which is undesirable for the reaction around the peri-implant soft tissues. The aim of this study is to improve the physicochemical properties of titanium (Ti) and zirconia (ZrO₂) implant abutments and shorten the formation period of periabutment epithelium tissue. A nonthermal atmospheric plasma brush (NTAPB, N) was employed for Ti and ZrO₂ activation. The surface topographies, roughness, crystallinity, wettability, and chemical elements of the abutment materials were examined. The epithelial cell behavior analysis and tissue remodeling of the periabutment epithelial tissue were performed in vitro and in vivo. N-Ti and N-ZrO₂ had a similar good surface wettability, with a 65 and 70% increase in oxygen content and a 70 and 75% decrease in carbon content, respectively. Both N-Ti and N-ZrO₂ showed excellent adhesion, spread, and proliferation of epithelial cells in vitro, with improved adhesion molecule expression levels compared to untreated samples. N-Ti and N-ZrO₂ abutments were placed in the implantation sites of rats. From week 2 to week 6 after implantation, N-Ti and N-ZrO₂ had similar periabutment epithelium tissue formation, and both had increased plectin-positive and laminin γ2-positive cell numbers compared to Ti and ZrO₂. The NTAPB shows promising abutment modification abilities. It promotes the expression levels of adhesion molecules and the epithelial cell performance, which later leads to a quicker formation and remodeling of the important periabutment epithelial tissue.

Fibroblast behavior on conventionally processed, milled, and printed occlusal device materials with different surface treatments

STATEMENT OF PROBLEM

Occlusal devices can be either conventionally processed, milled, or printed. However, little is known about the biocompatibility of 3D printing resin materials.

PURPOSE

The purpose of this in vitro study was to compare the viability and morphology of human gingival fibroblast cells (HFG-1) after cultivation on conventionally processed, milled, and printed occlusal device materials with different surface treatments.

MATERIAL AND METHODS

Disks of a conventionally processed (PalaXpress Clear [pP]), milled (Yamahachi PMMA Clear [sY]), and 2 different printed materials (Dental LT Clear Resin [aD]; Freeprint splint [aF]) were prepared. The surfaces of the specimens were finished by using 2 different treatments (unpolished and polished with P1200-grit silicon carbide paper). HGF-1 cells were cultivated on the specimens for 24 hours, and a viability assay was performed by using polystyrene disks as a control (n=9 disks per group). Cell morphology and the topography of the specimens were examined with scanning electron microscopy (n=3 disks per group). Two-way analysis of variance was applied to determine the effect of material and surface treatment followed by the post hoc Fisher least significant difference test (α=.05).

RESULTS

Overall, material (P<.001) and surface treatment (P<.001) significantly influenced the viability of HGF-1 cells. The viability of cells on all specimens displayed mean values between 0.85 and 1.01 compared with the control except for unpolished aD (0.00 ±0.07) and aF (0.02 ±0.05) that had only a few cells with a round shape.

CONCLUSIONS

The behavior of HGF-1 cells on conventionally processed and milled specimens was similar and not dependent on the surface treatment. Unpolished printed specimens had a cytotoxic effect. However, after polishing, cell behavior was similar to that of the conventionally processed and milled specimens.

Biocompatibility of Lithium Disilicate and Zirconium Oxide Ceramics with Different Surface Topographies for Dental Implant Abutments

Gingivafibroblasts were cultured on lithium disilicate, on zirconia dioxide, and on titanium with two different surface roughnesses (0.2 µm and 0.07 µm); Proliferation (MTT), Living/Dead staining, cytotoxicity (LDH), proliferation (FGF2), and inflammation (TNFα) were analyzed after 1 day and 21 days. Furthermore, alteration in cell morphology (SEM) was analyzed. The statistical analysis was performed by a Kruskal-Wallis test. The level of significance was set at p < 0.05. There were no distinct differences in cellular behavior between the tested roughness. There were slight differences between tested materials. Cells grown on zirconia dioxide showed higher cytotoxic effects. Cells grown on lithium disilicate showed less expression of TNFα compared to those grown on zirconia dioxide or titanium. These effects persisted only during the first time span. The results indicate that the two tested high-strength ceramics and surface properties are biologically suitable for transmucosal implant components. The findings may help clinicians to choose the most appropriate biomaterial as well as the most appropriate surface treatment to use in accordance with specific clinical dental applications.

Fabrication of enamel-like structure on polymer-infiltrated zirconia ceramics

OBJECTIVES

The aim of this study is to improve the biological and mechanical properties of zirconia-based PICN (polymer-infiltrated-ceramic-network) materials by fabrication an enamel-like structure on its surface.

METHODS

Fluorapatite (FA) arrays were fabricated on zirconia discs by hydrothermal treatment. After polymer infiltration, an enamel-like structure was obtained on zirconia-based PICN materials. Effects of hydrothermal treatment conditions on the FA arrays were investigated by XRD, FTIR and SEM. Human gingival fibroblast cells (HGFs) and Escherichia coli (E. coli) were used to evaluate the cytocompatibility and antibacterial properties. Nanoindentation method was employed to determine elastic modulus and hardness.

RESULTS

A facile and pervasive method was developed in this study to fabricate an enamel-like structure constituted of controlled FA arrays and interstitial resin on zirconia-based PICN materials. The obtained FA arrays can significantly promote the adhesion and proliferation of human gingival fibroblasts (HGFs), and further effectively inhibit the growth of Escherichia coli. Owing to the hierarchical structure, the enamel-like structure has achieved a hardness of 1.79 GPa and a lower Young's modulus of 37.4 GPa.

SIGNIFICANCES

The enamel-like structure, with excellent biological and mechanical properties, is promising for various applications in dentistry.

Effect of in vitro aging and acidic storage on color, translucency, and contrast ratio of monolithic zirconia and lithium disilicate ceramics

STATEMENT OF PROBLEM

How the translucency and color of ceramic restorations are affected by surface changes from the corrosive environment in the oral cavity and aging of materials is unclear.

PURPOSE

The purpose of this in vitro study was to compare the impact of acidic exposure and aging on the color and translucency of monolithic zirconia and lithium disilicate ceramics.

MATERIAL AND METHODS

Twenty computer-aided design and computer-aided manufacturing (CAD-CAM) monolithic zirconia specimens and 20 pressed lithium disilicate specimens were fabricated. Half of the specimens of each group were aged in an autoclave (7.5 hours, 134 °C, 0.2 MPa), and the rest were immersed in hydrochloric acid to simulate the acidic conditions in the oral cavity from gastric reflux. The color coordinates L∗, a∗, and b∗ were measured with an ultraviolet spectrophotometer before and after aging or acidic storage. The translucency parameters and contrast ratios were calculated, and the CIEDE2000 color difference formula was used to determine color differences before and after each treatment. ANOVA and ANCOVA test models were used for data analysis (α=.05), while differences of color parameters in respect to acceptability and perceptibility thresholds were evaluated with the 1-sample t test (α=.05).

RESULTS

Lithium disilicate presented a significantly higher translucency parameter and lower contrast ratio at baseline compared with monolithic zirconia specimens (P<.001). Acidic storage significantly impacted all parameters compared with aging, especially for the lithium disilicate group. Color differences were above the acceptability ΔΕ₀₀ threshold for lithium disilicate after acidic storage (P=.001) and below for monolithic zirconia after acidic storage (P=.003).

CONCLUSIONS

The performance of lithium disilicate was slightly inferior compared with that of monolithic zirconia specimens, as they presented significant and clinically observable differences for the translucency parameter and ΔΕ₀₀ after acidic storage and aging.

Comparative Toxicological In Vitro and In Ovo Screening of Different Orthodontic Implants Currently Used in Dentistry

Selecting the most biocompatible orthodontic implant available on the market may be a major challenge, given the wide array of orthodontic devices currently available on the market. The latest scientific data have suggested that in vitro evaluations using oral cell lines provide reliable data regarding the toxicity of residual particles released by different types of orthodontic devices. In this regard, the in vitro biocompatibility of three different commercially available implants (stainless steel and titanium-based implants) was assessed.

METHODS

As an in vitro model, human gingival fibroblasts (HGFs) were employed to evaluate the cellular morphology, cell viability, and cytotoxicity by means of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and lactate dehydrogenase (LDH) assays at 24 h and 72 h post-exposure to test implants.

RESULTS

The results correlate the composition and topography of the implant surface with biological experimental evaluations related to directly affected cells (gingival fibroblasts) and toxicological results on blood vessels (hen's egg test-chorioallantoic membrane (HET-CAM) assay). The stainless steel implant exhibits a relative cytotoxicity against HGF cells, while the other two samples induced no significant alterations of HGF cells.

CONCLUSION

Among the three test orthodontic implants, the stainless steel implant induced slight cytotoxic effects, thus increased vigilance is required in their clinical use, especially in patients with high sensitivity to nickel.

Surface structuring of zirconia to increase fibroblast viability

OBJECTIVE

The neck area of zirconia implants or abutments is currently either machined, polished and in some cases additionally heat-treated. The aim of the present study was to determine how the surface topography and crystalline structure of zirconia affects the viability of human gingival fibroblasts (HGF-1).

METHODS

Zirconia discs with a diameter of 13mm were either polished [Zp], polished and heat-treated [Zpt], machined [Zm], machined and heat-treated [Zmt] or sandblasted, etched and heat-treated [Z14] which is the surface topography of the endosseous part of a zirconia implant. The specimen surfaces were analyzed using scanning electron microscopy (SEM), characterized in terms of monoclinic to tetragonal phase ratio, storage effect on wettability and roughness. The viability and morphology of HGF-1 cells was then tested on all surfaces after 24h.

RESULTS

The effect of the heat-treatment was visualized for the polished specimens with SEM. Contact angle of water was significantly decreased after 2 weeks air storage of the zirconia. Cell viability was significantly higher on smooth surfaces (Zpt, Zm, Zmt) when compared to Z14. HGF-1 cells spread very flat and attached tightly to the smoother surfaces Zp, Zpt, Zm and Zmt while on Z14, cells did not fully extend into the etched morphology of zirconia and stretched over longer distances.

SIGNIFICANCE

For the structuring of the neck part of zirconia implants or abutments, a smooth surface with exposed grains might be suggested as the optimal substrate for human gingival fibroblasts. The wettability with water of zirconia decreases with prolonged air storage.

Effects of low-temperature degradation on the surface roughness of yttria-stabilized tetragonal zirconia polycrystal ceramics: A systematic review and meta-analysis

STATEMENT OF PROBLEM

A wide range of yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) ceramics have been applied for dental restorations. However, whether hydrothermal aging affects the surface roughness of Y-TZP is unknown.

PURPOSE

The purpose of this systematic review and meta-analysis was to evaluate the effects of low-temperature degradation (LTD) on the surface roughness of Y-TZP ceramics.

MATERIAL AND METHODS

This report follows the Preferred Reporting Items for Systematic Reviews and Qualitative Analyses statement. The literature search was conducted with Medline through the PubMed, Web of Science, and Cochrane Library with no publication year limits. The screening and quality assessment were performed by 2 independent reviewers. The studies comparing the surface roughness of Y-TZP ceramics after LTD by using steam autoclave aging were included in the meta-analysis. Meta-analyses were conducted with a random-effects model (α=.05) by using Review Manager Software (Cochrane Collaboration).

RESULTS

Of the 203 potentially relevant studies, 32 full texts were assessed for eligibility. A total of 17 articles were included in the systematic review, and 15 were included in the qualitative analyses. The results showed no significant difference in the arithmetic average height (R_a) values between the nonaged and aged Y-TZP (P=.670; mean difference=0.01; 95% confidence interval=-0.03 to 0.05). Subgroup analyses revealed that the aging duration (P=.003) and specimen preparation (P=.010) contributed significantly to the changes in the surface roughness of the Y-TZP ceramics.

CONCLUSIONS

Although LTD was found to have no significant effects on the surface roughness of Y-TZP ceramics, the effects of LTD depended on the duration of the steam autoclave process and the specimen preparation.