Release of daptomycin from polymethylmethacrylate beads in a continuous flow chamber

Dual release of daptomycin and BMP-2 from a composite of β-TCP ceramic and ADA gelatin

BACKGROUND

Antibiotic-containing carrier systems are one option that offers the advantage of releasing active ingredients over a longer period of time. In vitro sustained drug release from a carrier system consisting of microporous β-TCP ceramic and alginate has been reported in previous works. Alginate dialdehyde (ADA) gelatin gel showed both better mechanical properties when loaded into a β-TCP ceramic and higher biodegradability than pure alginate.

METHODS

Dual release of daptomycin and BMP-2 was measured on days 1, 2, 3, 6, 9, 14, 21, and 28 by HPLC and ELISA. After release, the microbial efficacy of the daptomycin was verified and the biocompatibility of the composite was tested in cell culture.

RESULTS

Daptomycin and the model compound FITC protein A (n = 30) were released from the composite over 28 days. A Daptomycin release above the minimum inhibitory concentration (MIC) by day 9 and a burst release of 71.7 ± 5.9% were observed in the loaded ceramics. Low concentrations of BMP-2 were released from the loaded ceramics over 28 days.

Antimicrobial potency, prevention ability, and killing efficacy of daptomycin-loaded versus vancomycin-loaded β-tricalcium phosphate/calcium sulfate for methicillin-resistant Staphylococcus aureus biofilms

Growing evidence has shown that the efficacy of systemic administration of daptomycin for the treatment of methicillin-resistant Staphylococcus aureus (MRSA)-related infections is satisfactory. However, the clinical efficacy of the local administration of daptomycin for the management of osteoarticular infections remains unclear. This in vitro study compared the efficacy of daptomycin and vancomycin against MRSA biofilms. The elution kinetics of daptomycin and vancomycin, combined with gentamicin and loaded with either β-tricalcium phosphate/calcium sulfate or calcium sulfate, in the presence of MRSA infection, was assessed. Their efficacy in preventing biofilm formation and killing pre-formed biofilms was assessed using colony-forming unit count and confocal laser scanning microscopy. In addition, the efficacy of daptomycin, vancomycin, and gentamicin in prophylaxis and eradication of MRSA biofilms was also evaluated. Daptomycin + gentamicin and vancomycin + gentamicin displayed similar antimicrobial potency against MRSA, by either β-tricalcium phosphate/calcium sulfate or calcium sulfate. In the prevention assays, both daptomycin + gentamicin and vancomycin + gentamicin showed similar efficacy in preventing bacterial colony formation, with approximately 6 logs lower colony-forming units than those in the control group at both 1 and 3  days. The killing effect on pre-formed biofilms showed significant decreases of approximately 4 logs at 1 and 3  days following treatment with daptomycin + gentamicin and vancomycin + gentamicin. In addition, the confocal laser scanning microscopy results support the colony-forming unit data. Moreover, single use of vancomycin and gentamicin showed similar efficacies in preventing and killing MRSA biofilms, both of which were better than that of gentamicin. Our study demonstrated that vancomycin + gentamicin and daptomycin + gentamicin loaded with β-tricalcium phosphate/calcium sulfate or calcium sulfate showed similar prophylactic and killing effects on MRSA biofilms, implying a potential indication of local administration daptomycin for the treatment of MRSA-associated osteoarticular infections, especially if vancomycin administration presents limitations.

Daptomycin-Tobramycin Cement Beads have Lethal Local Antibacterial Effect in Resistant Periprosthetic Joint Infections

Background Resistant periprosthetic joint infection (PJI) can be a devastating complication of surgery and is difficult to treat. We attempted to identify the utility of Daptomycin/Tobramycin-impregnated polymethylmethacrylate (PMMA) beads in resistant PJIs. Methods Charts of patients with hip or knee PJI at a single academic medical center, with surgeries performed from May 2008 through May 2018, were reviewed retrospectively. The diagnosis of PJI was consistent with the Musculoskeletal Infection Society recommendations. Prosthetic joints underwent radical anterior-posterior synovectomy and placement of antibiotic cement beads in the infected joint. Clinical cure rate and local intraarticular antibiotic concentration were measured. Results Forty-four patients experienced 53 episodes of PJI, requiring 88 surgeries. There was a fairly even split between hip and knee PJI. The cure rate was 92% (11/12) for patients who had any infection with methicillin-resistant staphylococci during the evaluation period, compared with 62% (13/21) for patients with methicillin-susceptible Staphylococci. On days one and seven, the addition of tobramycin increased daptomycin concentrations by 47% and 3374%, respectively, for beads made onsite compared to elution of daptomycin alone. Elution increased by 44% and 8394%, respectively, for commercial beads compared to beads fabricated onsite. Conclusions Daptomycin-Tobramycin-loaded PMMA beads are safe and powerful bactericidal agents in prosthetic joint infections.

Oritavancin polymethylmethacrylate (PMMA)-compressive strength testing and in vitro elution

Background

Polymethylmethacrylate (PMMA) is used for local antimicrobial delivery in orthopedic infection. Oritavancin is a long half-life lipoglycopeptide with broad activity against Gram-positive bacteria. Herein, we addressed if 7.5% w/w oritavancin mixed into PMMA affects PMMA strength and whether it elutes from PMMA, compared to vancomycin.

Methods

Elution was assessed by placing an oritavancin- or vancomycin-loaded bead in a flow system with human plasma. Compressive strength of bland compared to oritavancin- or vancomycin-loaded PMMA was assessed after 0, 3, and 7 days of soaking in 1 ml of pooled normal human plasma at 37 °C, by testing to failure in axial compression using a servo-hydraulic testing machine.

Results

Median compressive strength on days 0, 3, and 7 for bland PMMA compared to oritavancin- or vancomycin-loaded PMMA was 80.1, 79.4, and 72.4 MPa, respectively; 93.3, 86.4, and 65.3 MPa, respectively; and 97.8, 82.7, and 65.9 MPa, respectively. Oritavancin reduced PMMA compressive strength after 3 and 7 days (P = 0.0250 and 0.0039, respectively), whereas vancomycin reduced the PMMA compressive strength after 0, 3, and 7 days (P = 0.0039, 0.0039, and 0.0062, respectively) as compared to bland PMMA. Oritavancin-loaded PMMA had higher compressive strength than vancomycin-loaded PMMA on days 3 and 7 (P = 0.0039 and 0.0062, respectively). Compressive elastic moduli were 1226, 1299, and 1394 MPa for bland PMMA; 1253, 1078, and 1245 MPa for oritavancin-loaded PMMA; and 986, 879, and 779 MPa for vancomycin-loaded PMMA on days 0, 3 and 7, respectively. Oritavancin-loaded PMMA had higher compressive elastic moduli than vancomycin-loaded PMMA on days 0 and 7 (P = 0.0250 and 0.0062, respectively). Following polymerization, 1.0% and 51.9% of the initial amount of oritavancin and vancomycin were detected, respectively. C_max, T_max, and AUC_0–24 were 1.7 μg/ml, 2 h, and 11.4 μg/ml for oritavancin and 21.4 μg/ml, 2 h, and 163.9 μg/ml for vancomycin, respectively.

Conclusions

Oritavancin-loaded PMMA had higher compressive strength than vancomycin-loaded PMMA on days 3 and 7 and higher compressive elastic moduli than vancomycin-loaded PMMA on days 0 and 7. However, proportionally less oritavancin than vancomycin eluted out of PMMA.

Development of advanced biantibiotic loaded bone cement spacers for arthroplasty associated infections

The incidence increase of infections in patients with hip or knee implants with resistant pathogens (mainly some S. coagulase-negative and gram positive bacteria) demands advanced antibiotic loaded formulations. In this paper, we report the design of new biantibiotic acrylic bone cements for in situ delivery. They include a last generation antibiotic (daptomycin or linezolid) in combination with vancomycin and are performed based on a novel modification of the Palacos R^® acrylic bone cement, which is based on two components, a liquid (methyl methacrylate) and a solid (polymeric phase). Hence, the solid component of the experimental formulations include 45wt% of microparticles of poly(D,L-lactic-co-glycolic) acid, 55wt% of poly(methyl methacrylate) beads and supplements (10wt-% each) of antibiotics. These formulations provide a selective and excellent control of the local release of antibiotics during a long time period (up to 2 months), avoiding systemic dissemination. The antimicrobial activity of the advanced spacers tested against S. aureus shows that single doses would be enough for the control of the infection. In vitro biocompatibility of cements on human osteoblasts is ensured. This paper is mainly focused on the preparation and characterization of cements and the studies of elution kinetics and bactericidal effects. Developed formulations are proposed as spacers for the treatment of infected arthroplasties, but also, they could be applied in other antibiotic devices to treat relevant bone-related infection diseases.

Methicillin-resistant Staphylococcal periprosthetic joint infections can be effectively controlled by systemic and local daptomycin

Background

Methicillin-resistant Staphylococcus remains a serious problem in the treatment of periprosthetic joint infection (PJI). Higher failure rates were reported when vancomycin was used in 2-stage exchange arthroplasty. Therefore a better therapeutic drug is needed to treat PJI caused by methicillin-resistant organisms. The purpose of the study was to evaluate the safety and efficacy of daptomycin when administered in bone cement combined with systemic use for methicillin-resistant Staphylococci PJI.

Methods

We conducted a retrospective study from January 2010 to December 2012. Twenty-two patients (10 knees and 12 hips) with PJI caused by methicillin-resistant Staphylococcus species underwent 2-stage revision arthroplasty. In the first stage, 10 % daptomycin (weight daptomycin per weight bone cement) was incorporated into polymethylmethacrylate bone cement, and systemic daptomycin (6 mg/kg) was administered postoperatively for 14 days. In the second stage, 2.5 % w/w daptomycin was used in the bone cement. The minimum follow-up was 2 years or until recurrence of infection.

Results

The infecting organisms included methicillin-resistant Staphylococcus aureus in 10 patients, methicillin-resistant Staphylococcus epidermidis in 8 patients and methicillin-resistant coagulase-negative Staphylococci in 4 patients. The mean follow-up duration was 33.7 months (range, 24–51 months). The treatment success rate was 100 %. Only one patient developed asymptomatic transient elevation of the creatine phosphokinase level. No patient experienced any adverse effects related to daptomycin such as myositis, rhabdomyolysis, peripheral neuropathy, derangement of liver function, or eosinophilic pneumonia.

Conclusions

In this series, no serious adverse events occurred. Our protocol, using daptomycin-impregnated cement combined with short duration of systemic daptomycin, appears to be an effective and safe treatment for methicillin-resistant Staphylococcus PJI.

Elution of High Dose Amphotericin B Deoxycholate From Polymethylmethacrylate

Fungal periprosthetic joint infections are rare, devastating complications of arthroplasty. There is conflicting evidence as to the efficacy of amphotericin B elution from cement spacers. The purpose of this study was to determine whether concentrations of amphotericin B released from bone cement over time would be efficacious in treating a periprosthetic infection. A continuous flow chamber was used to evaluate the in vitro release of amphotericin from cement beads containing 7.5% amphotericin. Following polymerization, 3.3% of the initially loaded amphotericin B was detected. The peak mean concentration eluted from the bone cement was 0.33 μg/mL at 8 hours. The AUC0-24 was 2.79 μg/mL/h; 0.20% of the amphotericin B was released. In conclusion, amphotericin B is released from bone cement at a clinically useful concentration.

Daptomycin-loaded polymethylmethacrylate bone cement for joint arthroplasty surgery

Antibiotic-loaded acrylic bone cement has been frequently used as an infection prophylaxis or antibiotic-loaded spacer in infected arthroplasty. In addition, daptomycin has been used recently against broad spectrum Gram-positive organisms. The goal of this in vitro study is to investigate the bacteriacidal and mechanical properties of daptomycin-incorporated polymethylmethacrylate (PMMA) bone cement and evaluate its feasibility for clinical use. Daptomycin (0.5, 1, or 2 g) was premixed with 40 g of PMMA bone cement powder before curing. The mechanical properties of the daptomycin-loaded acrylic bone cement (DLABC) were estimated following standard guidance, and the release profile and kinetics of daptomycin from PMMA were analyzed. The antimicrobial efficacy of DLABC was determined with a zone of inhibition (ZOI) assay against Staphylococcus aureus, Staphylococcus epidermis, Enterococcus faecalis, and Enterococcus faecium, respectively. The results showed that the compressive strength, of PMMA bone cement, which was higher than 100 MPa in all groups, was sufficient according to ISO 5833 after incorporation of daptomycin. The encapsulated daptomycin was released for 2 weeks with a 9.59 ± 0.85%, 15.25 ± 0.69%, and 20.64 ± 20.33% released percentage on the first day in the low, mid, and high groups, respectively. According to the calculated release kinetics, incorporated daptomycin should be 3.3 times the original dose to double its release. Although all recipes of DLABC had a microbial inhibitory effect, the effect with a higher encapsulated amount of daptomycin was more significant. Therefore, we believe that daptomycin can be locally delivered from PMMA bone cement at the surgical site as a prophylactic or treatment for osteomyelitis against Gram-positive organisms with intact cement function.

Periprosthetic joint infections: clinical and bench research

Prosthetic joint infection is a devastating complication with high morbidity and substantial cost. The incidence is low but probably underestimated. Despite a significant basic and clinical research in this field, many questions concerning the definition of prosthetic infection as well the diagnosis and the management of these infections remained unanswered. We review the current literature about the new diagnostic methods, the management and the prevention of prosthetic joint infections.

Real-time and in situ drug release monitoring from nanoporous implants under dynamic flow conditions by reflectometric interference spectroscopy

Herein, we present an innovative approach to monitoring in situ drug release under dynamic flow conditions from aluminum implants featuring nanoporous anodic alumina (NAA) covers used as a model of drug-releasing implants. In this method, reflectometric interference spectroscopy (RIfS) is used to monitor in real-time the diffusion of drug from these nanoporous implants. The release process is carried out in a microfluidic device, which makes it possible to analyze drug release under dynamic flow conditions with constant refreshing of eluting medium. This setup mimics the physiological conditions of biological milieu at the implant site inside the host body. The release of a model drug, indomethacin, is established by measuring the optical thickness change with time under four different flow rates (i.e. 0, 10, 30, and 50 μL min(-1)). The obtained data are fitted by a modified Higuchi model, confirming the diffusion-controlled release mechanism. The obtained release rate constants demonstrate that the drug release depends on the flow rate and the faster the flow rate the higher the drug release from the nanoporous covers. In particular, the rate constants increase from 2.23 ± 0.02 to 12.47 ± 0.04 μg min(-1/2) when the flow rate is increased from 10 to 50 μL min(-1), respectively. Therefore, this method provides more reliable and relevant information than conventional in vitro drug release methods performed under static conditions.

Successful Clinical Use of Daptomycin-Impregnated Bone Cement in Two-Stage Revision Hip Surgery for Prosthetic Joint Infection

OBJECTIVE

To describe the safe and successful use of daptomycin-impregnated polymethyl methacrylate (PMMA) bone cement in the treatment of a case of recurrent prosthetic joint infection in a patient with multiple antibiotic allergies and past colonization with multiply antibiotic-resistant organisms.

CASE SUMMARY

A 79-year-old female had a history of chronic recurrent left prosthetic hip infection. The patient had confirmed allergies to multiple antibiotics and a past history of colonization with methicillin-resistant Staphylococcus aureus. At first-stage revision surgery, the infected prosthesis was removed and samples were sent for microbiologic culture. A spacer device was fashioned, with incorporation of daptomycin and gentamicin into the PMMA bone cement at a concentration of 5% w/w for each antibiotic. Systemic daptomycin and gentamicin were administered postoperatively for 14 days. Propionibacterium acnes was isolated from deep-tissue specimens. The patient made excellent postoperative progress and was discharged after 2 weeks. Second-stage revision surgery was performed at 6 months, with no signs of persistent infection. She remained well, pain free, and mobilizing independently 2 years later.

DISCUSSION

Daptomycin, a cyclic lipopeptide antibiotic, is approved for systemic treatment of endocarditis and skin and soft tissue infections. In vitro data demonstrate acceptable drug elution from and tensile strength of daptomycin-impregnated PMMA bone cement; however, clinical data are lacking. In our patient's case, the cement formulation was well tolerated, with no adverse effects detected, and demonstrated adequate mechanical strength in vivo. Infection with P. acnes, an unusual pathogen, was successfully treated. Further clinical studies are required to assess the efficacy of daptomycin-impregnated cement in infection with more typical pathogens, such as S. aureus.

CONCLUSIONS

Daptomycin impregnation of PMMA bone cement may be an option in cases in which patient or pathogen factors preclude use of routinely incorporated agents.

Daptomycin: local application in implant-associated infection and complicated osteomyelitis

BACKGROUND

The rise of highly resistant bacteria creates a persistent urge to develop new antimicrobial agents. This paper investigates the application of the lipopeptide antibiotic daptomycin in infections involving the human bone.

METHODS

Compressive and tensile strength testing of daptomycin-laden PMMA was performed referring to the ISO 5833. The microstructure of the antibiotic-laden PMMA was evaluated by scanning electron microscopy. Intracellular activity of daptomycin was determined by a human osteoblast infection model. Elution kinetics of the antibiotic-laden bone cement was measured by using a continuous flow chamber setup.

RESULTS

There was no significant negative effect of adding 1.225% and 7.5% per weight of daptomycin to the PMMA. There was no significant difference in intracellular activity comparing gentamicin to daptomycin. Elution of daptomycin from PMMA showed within the first-hour initial peak values of 15-20 μg/mL.

CONCLUSION

Daptomycin has a certain degree of activity in the intracellular environment of osteoblasts. Daptomycin admixed to PMMA remains bactericidal and does not significantly impair structural characteristics of the PMMA. The results of this paper suggest that daptomycin might be a potent alternative for treating osteomyelitis and implant-associated infection in trauma and orthopedic surgery caused by multiresistant strains.

Characterization of daptomycin-loaded antibiotic cement

Antibiotics are commonly mixed with polymethylmethacrylate (PMMA) cement to suppress severe periprosthetic infections associated with total joint arthroplasty. The relationship between antibiotic concentration and the resulting elution kinetics remains unclear. The purpose of this study was to characterize the release of daptomycin from PMMA cement and the subsequent effects on mechanical properties.Varying concentrations of daptomycin and tobramycin were vacuum mixed in commercially available PMMA and subjected to an in vitro elution period. High-performance liquid chromatography was used to quantify the concentration of the amount of daptomycin eluted at predetermined time points. Samples were subjected to compressive loading to analyze the effect of antibiotic concentration on cement mechanical properties. Daptomycin elution increased when initial tobramycin concentration was increased. Furthermore, the addition of antibiotics increased the compressive strength of the cement in the postelution period. The binary addition of tobramycin with daptomycin antibiotics modifies the elution and mechanical properties of PMMA bone cement. Based on the findings of our study, 2 g of daptomycin and 3.6 g of tobramycin per 40-g packet of cement should be used to promote daptomycin elution without sacrificing PMMA mechanical properties.

Poly(methyl methacrylate) particulate carriers in drug delivery

Poly(methyl methacrylate) (PMMA) is one of the most widely explored biomedical materials because of its biocompatibility, and recent publications have shown an increasing interest in its applications as a drug carrier. PMMA-based particulate carriers (PMMA(P)) can be prepared either by polymerization methods or from pre-formed polymer-based techniques. Potential biomedical application of these particles includes their use as adjuvant for vaccines and carrier of many drugs as antibiotics and antioxidants via different routes of administration. Release of drugs from PMMA(P) occurs typically in a biphasic way with an incomplete drug release. To improve release profiles, recent strategies are focusing on increasing polymer hydrophilicity by synthesizing functionalized PMMA microspheres or by formulating PMMA composites with hydrophilic polymers. This review examines the current status of preparation techniques, drug release kinetics, biomedical applications and toxicity of these nano/micro PMMA-based particulate carriers.

Contrasting effects of physical wear on elution of two antibiotics from orthopedic cement

The use of antibiotics as a supplement to bone cement for the purposes of providing a local release of antibiotics is common practice in arthroplasty surgery and the kinetics of elution of the antibiotics in such systems have been investigated previously. However, in these previous studies no account was taken of the potential effects that wear may have on the elution kinetics of the antibiotic. Here, we have modified an existing wear testing rig to allow the simultaneous study of the elution kinetics of bone cement samples containing antibiotics being subjected to immersion only and immersion and conjoint wear. The results show contrasting effects with two commonly used antibiotics. Bone cement containing daptomycin showed no substantial change in antibiotic elution due to wear, while cement containing gentamicin (the most commonly used antibiotic in this application) in contrast demonstrated a substantial reduction in the rate of antibiotic elution when wear was applied. Scanning electron microscopy revealed a possible explanation for these diverse results, due to wear-induced "sealing" of the surface in conjunction with the crystal morphology of the antibiotic.

Are anidulafungin or voriconazole released from polymethylmethacrylate in vitro?

BACKGROUND

Depot delivery of antimicrobial agents is used for treatment and prevention of bacterial orthopaedic infections; there is little information regarding newer antifungal agents and their potential use in polymethylmethacrylate (PMMA) depot delivery.

QUESTIONS/PURPOSES

We determined the percent of anidulafungin or voriconazole present after polymerization in PMMA beads loaded with anidulafungin or voriconazole, and we assessed elution of anidulafungin or voriconazole from beads loaded with anidulafungin or voriconazole.

MATERIALS AND METHODS

Beads containing 7.5% anidulafungin or voriconazole were pulverized and incubated in Kreb's ringer buffer for 48 hours; the buffer was assayed for anidulafungin or voriconazole concentration. The in vitro release of anidulafungin and voriconazole from PMMA beads loaded with 7.5% anidulafungin or voriconazole was determined in triplicate in a continuous flow chamber.

RESULTS

0.7% of anidulafungin and 5.6% of voriconazole loaded in the beads were detected after polymerization. No anidulafungin was detected in the elution studies. The mean peak voriconazole concentration in the elution studies was 0.9 μg/mL.

CONCLUSIONS

Anidulafungin may not be suitable for depot delivery in PMMA.

Consensus document on controversial issues in the diagnosis and treatment of prosthetic joint infections

BACKGROUND

Joint replacement surgery has been on the increase in recent decades and prosthesis infection remains the most critical complication. Many aspects of the primary prevention and clinical management of such prosthesis infections still need to be clarified.

CONTROVERSIAL ISSUES

The aim of this GISIG (Gruppo Italiano di Studio sulle Infezioni Gravi) working group - a panel of multidisciplinary experts - was to define recommendations for the following controversial issues: (1) Is a conservative surgical approach for the management of prosthetic joint infections effective? (2) Is the one-stage or the two-stage revision for the management of prosthetic joint infections more effective? (3) What is the most effective treatment for the management of prosthetic joint infections due to methicillin-resistant staphylococci? Results are presented and discussed in detail.

METHODS

A systematic literature search using the MEDLINE database for the period 1988 to 2008 of randomized controlled trials and/or non-randomized studies was performed. A matrix was created to extract evidence from original studies using the CONSORT method to evaluate randomized clinical trials and the Newcastle-Ottawa Quality Assessment Scale for case-control studies, longitudinal cohorts, and retrospective studies. The GRADE method for grading quality of evidence and strength of recommendation was applied.

Daptomycin in bone and joint infections: a review of the literature

INTRODUCTION

To review the pharmacology, pharmacokinetics, efficacy, and safety of daptomycin, a novel antibiotic for the treatment of bone and joint infections, a literature search of relevant articles was conducted.

MATERIALS AND METHODS

A PubMed/MEDLINE search (1990-April 2008) to identify relevant English-language literature was conducted. Search terms included bone and joint infection, osteomyelitis, daptomycin, and methicillin-resistant Staphylococcus aureus (MRSA). Additional articles were identified by reviewing the bibliographies of articles cited. Programs and abstracts from infectious disease meetings were searched, and prescribing information of antibiotics indicated for bone and joint infections consulted. All articles identified from data sources published in English were evaluated.

RESULTS

Caused primarily by Gram-positive pathogens such as S. aureus and, to a lesser extent, Enterococcus faecalis, bone and joint infections are difficult to treat successfully. Surgical intervention and prolonged courses of antibiotics are frequently required, and failure of first-line antibiotic therapy is common. The emergence of S. aureus strains with reduced susceptibility to vancomycin, the longstanding gold standard for bone and joint infections, has complicated the clinical scenario. Few randomized trials comparing the efficacy of different antibiotics for bone and joint infections exist. Daptomycin, a novel intravenous lipopeptide antibiotic, has shown potent in vitro activity against a broad spectrum of Gram-positive bacteria, including many resistant pathogens commonly associated with bone and joint infections such as MRSA and vancomycin-resistant E. faecalis. Early clinical investigation of daptomycin in bone and joint infections unresponsive to antibiotics, such as vancomycin, has found a cure rate of approximately 80%, with a low incidence of adverse events and drug resistance.

CONCLUSION

Further studies are warranted to determine if limited clinical evidence, described in individual case reports and a daptomycin-specific retrospective registry, suggests daptomycin is a promising option for patients with bone and joint infections such as MRSA osteomyelitis.

Bone tissue engineering therapeutics: controlled drug delivery in three-dimensional scaffolds

This paper provides an extensive overview of published studies on the development and applications of three-dimensional bone tissue engineering (TE) scaffolds with potential capability for the controlled delivery of therapeutic drugs. Typical drugs considered include gentamicin and other antibiotics generally used to combat osteomyelitis, as well as anti-inflammatory drugs and bisphosphonates, but delivery of growth factors is not covered in this review. In each case reviewed, special attention has been given to the technology used for controlling the release of the loaded drugs. The possibility of designing multifunctional three-dimensional bone TE scaffolds for the emerging field of bone TE therapeutics is discussed. A detailed summary of drugs included in three-dimensional scaffolds and the several approaches developed to combine bioceramics with various polymeric biomaterials in composites for drug-delivery systems is included. The main results presented in the literature are discussed and the remaining challenges in the field are summarized with suggestions for future research directions.

Modeling vancomycin release kinetics from microporous calcium phosphate ceramics comparing static and dynamic immersion conditions

The release kinetics of vancomycin from calcium phosphate dihydrate (brushite) matrices and polymer/brushite composites were compared using different fluid replacement regimes, a regular replacement (static conditions) and a continuous flow technique (dynamic conditions). The use of a constantly refreshed flowing resulted in a faster drug release due to a constantly high diffusion gradient between drug loaded matrix and the eluting medium. Drug release was modeled using the Weibull, Peppas and Higuchi equations. The results showed that drug liberation was diffusion controlled for the ceramics matrices, whereas ceramics/polymer composites led to a mixed diffusion and degradation controlled release mechanism. The continuous flow technique was for these materials responsible for a faster release due to an accelerated polymer degradation rate compared with the regular fluid replacement technique.

Xylitol and glycine fillers increase permeability of PMMA to enhance elution of daptomycin

The elution of antibiotics from hand mixed antibiotic-laden polymethylmethacrylate (PMMA) must be increased to achieve clinical performance equivalent to commercially manufactured antibiotic beads (not available in the USA) in the management of musculoskeletal infections. Adding fillers such as glycine and dextran to polymethylmethacrylate increases the elution of antibiotics from antibiotic-laden PMMA. We propose xylitol, a naturally occurring sweetener with direct antibiofilm properties, as a filler material. To compare the efficacy of xylitol and glycine as fillers on the elution of antibiotics from PMMA, elution studies were performed on mixtures of Palacos polymethylmethacrylate and daptomycin (1 gm) with xylitol or glycine as the filler (28 g). Xylitol and glycine enhanced the daptomycin activity eluted from the polymethylmethacrylate. Xylitol was more effective than glycine, having a greater increase in daptomycin release at all data points; on day one xylitol increased the elution of daptomycin 2.67 times whereas glycine increased it 1.78 times also on day one. The eluant concentration of daptomycin remained higher longer for xylitol; 3.90 microg/mL for xylitol versus 2.25 microg/mL for glycine on day 9. Xylitol is inexpensive and readily available. It can be hand mixed with PMMA, and is more effective than glycine as a filler to enhance daptomycin release. Considering possible antibiofilm activity, xylitol may be a more advantageous choice.

Prosthetic joint infections

Success in the treatment of infected orthopedic prosthesis requires the best surgical approach in combination with prolonged optimum targeted antimicrobial therapy. In choosing the surgical option, one must consider the type of infection, condition of the bone stock and soft tissue, the virulence and antimicrobial susceptibility of the pathogen, the general health and projected longevity of the patient, and the experience of the surgeon. If surgery is not possible, an alternative is long-term oral antimicrobial suppression to maintain a functioning prosthesis. Treatment must be individualized for a specific infection in a specific patient.

Daptomycin treatment of Staphylococcus aureus experimental chronic osteomyelitis

BACKGROUND

Infection due to methicillin-resistant Staphylococcus aureus (MRSA) is increasingly common in nosocomial and community settings. Daptomycin is a cyclic lipopeptide anti-infective with activity against MRSA, approved for treatment of complicated skin and skin structure infections. Daptomycin may be useful in systemic or local treatment of chronic osteomyelitis.

METHODS

We measured mechanical strength of daptomycin- and vancomycin-loaded polymethylmethacrylate (PMMA), assayed in vivo release of daptomycin and vancomycin from daptomycin- and vancomycin-loaded PMMA, respectively, and compared the efficacy of two systemic doses of daptomycin with that of vancomycin, each with or without the respective anti-infective loaded into PMMA, using a rat model of MRSA chronic osteomyelitis.

RESULTS

Neither tensile nor compressive strength of PMMA was impacted by impregnation with these antimicrobials at a concentration of 7.5% by weight. The peak concentrations of daptomycin and vancomycin in rat tibial bone surrounding a 7.5% daptomycin- and vancomycin-loaded 3 mm PMMA bead were 178 and 49 mg/L, respectively. In the treatment of experimental osteomyelitis, rats assigned to no treatment, daptomycin 50 mg/kg subcutaneously twice daily, daptomycin 60 mg/kg subcutaneously twice daily, and vancomycin 50 mg/kg intraperitoneally twice daily had 6.4, 4.1, 4.0 and 4.5 median log10 cfu/g of bone at the end of 21 days of therapy. All systemic anti-infectives studied were more active than was no treatment. Daptomycin- or vancomycin-loaded PMMA did not, however, exhibit microbiological efficacy alone or adjunctively, as assessed 21 days after implantation.

CONCLUSIONS

Daptomycin is released from PMMA in vivo at a rate similar to that of vancomycin. Systemic daptomycin is as active as vancomycin in a rat model of chronic MRSA experimental osteomyelitis.