Assessment of semi-volatile organic compounds in drinking water sources in Jiangsu, China

Occurrence of BTX and PAHs in underground drinking water of coking contaminated sites: Linkage with altitude and health risk assessment by boiling-modified models

The safety of underground drinking water has received widespread attention. However, few studies have focused on the occurrence and health risks of pollutants in underground drinking water of coking contaminated sites. In this study, the distribution characteristics, sources, and human health risks of benzene, toluene, xylene (BTX) and polycyclic aromatic hydrocarbons (PAHs) in underground drinking water from a typical coking contaminated site in Shanxi of China were investigated. The average concentrations of BTX and PAHs in coking plant (CP) were 5.1 and 4.8 times higher than those in residential area (RA), respectively. Toluene and Benzene were the main BTX, while Acenaphthene, Fluorene, and Pyrene were the main PAHs. Concentrations of BTX/PAHs were negatively correlated with altitude, revealing altitude might be an important geological factor influencing spatial distribution of BTX/PAHs. PMF model demonstrated that the BTX/PAHs pollution in RA mainly originated from coking industrial activities. Health risk assessments were conducted by a modified US EPA-based model, in which environmental concentrations were replaced by residual concentrations after boiling. Residual ratios of different BTX/PAHs were determined by boiling experiments to be 9.4-93.8 %. The average total carcinogenic risks after boiling were decreased from 2.6 × 10-6 to 1.4 × 10-6 for adults, and from 4.3 × 10-6 to 2.1 × 10-6 for children, suggesting boiling was an effective strategy to reduce the carcinogenic risks from BTX/PAHs, especially for ingestion pathway. Monte Carlo simulation results matched well with the calculated results, suggesting the uncertainty was acceptable and the risk assessment results were reliable. This study provided useful information for revealing the spatial distribution of BTX/PAHs in underground drinking water of coking contaminated sites, understanding their linkage with altitude, and also helped to more accurately evaluate the health risks by using the newly established boiling-modified models.

Volatile organic compounds in water matrices: Recent progress, challenges, and perspective

Volatile organic compounds (VOCs) are a group of organic compounds that have a molecular structure containing carbon and their chemical properties allow them to be easily converted to steam and gas and remain for a long period of time and have diverse effects on the environment. The purpose of this study is determination of the concentration of VOCs such as alachlor, anthracene, benzene, bromoform, chloroform, heptachlor, isophorone, tetrachloroethylene, γ -chlordane, toluene, etc. in water matrices. The results showed that among studies conducted on VOCs, the concentration of tetrachloroethylene, m,p-xylene, and toluene were at the top in water matrices, and the lowest average concentrations were found in chloroform, anthracene, and butyl benzyl phthalate. In terms of VOC concentrations in water matrices, China was the most polluted country. Moreover, the data analysis indicated that China was the only country with carcinogenic risk. A Monte-Carlo simulation showed that although the averages obtained were comparable to the acceptable limits, for heptachlor, the maximum carcinogenic risk is achieved at a level that is slightly over the limit, only 25% from the population being exposed.

Single enrichment systems possibly underestimate both exposures and biological effects of organic pollutants from drinking water

Comprehensive enrichment of contaminants in drinking water is an essential step for accurately determining exposure levels of contaminants and testing their biological effects. Traditional methods using a single absorbent for enriching contaminants in water might not be adequate for complicated matrices with different physical-chemical profiles. To examine this hypothesis, we used an integrated enrichment system that had three sequential stages-XAD-2 resin, poly (styrene-divinylbenzene) and activated charcoal to capture organic pollutants and disinfection by-products (DBPs) from drinking water in Shanghai. Un-adsorbed Organic Compounds in Eluates (UOCEs) named UOCEs-A, -B, and-C following each adsorption stage were determined by gas chromatography-mass spectrometry to evaluate adsorption efficiency of the enrichment system. Meanwhile, biological effects such as cytotoxicity, effects on reactive oxygen species (ROS) generation and glutathione (GSH) depletion were determined in human LO2 cells to identify potential adverse effects on exposure to low dose contaminants. We found that poly-styrene-divinylbenzene (PS-DVB) and activated charcoal (AC) could still partly collect UOCEs-A and-B that the upper adsorption column incompletely captured, and that potential carcinogens like 2-naphthamine were present in all eluates. UOCEs-A at (1-4000), UOCEs-B at (1000-4000), and UOCEs-C at (2400-4000) folds of the actual concentrations had significant cytotoxicity to LO2 cells. Additionally, ROS and GSH change in cells treated with UOCEs indicated the potential for long-term effects of exposure to some mixtures of contaminants such as DBPs at low doses. These results suggested that an enriching system with a single adsorbent would underestimate the exposure level of pollutants and the biological effects of organic pollutants from drinking water. Effective methods for pollutants' enrichment and capture of drinking water should be given priority in future studies on accurate evaluation of biological effects exposed to mixed pollutants via drinking water.

Application of diffusive gradients in thin-films for in-situ monitoring of nitrochlorobenzene compounds in aquatic environments

Nitrochlorobenzene compounds (NCBs) are of key interest in environmental monitoring due to their high toxicity. To better understand the presence and fate of NCBs in aquatic environments, an in-situ sampling technique of diffusive gradients in thin films (DGT) based on hydrophilic-lipophilic-balanced (HLB) resin, combined with gas chromatography, was developed to measure four typical NCBs, e.g. meta-chloronitrobenzene (MNCB), para-chloronitrobenzene (PNCB), ortho-chloronitrobenzene (ONCB), and 2,4-dinitrochlorobenzene (CDNB). The diffusion coefficients of MNCB, PNCB, ONCB, and CDNB in agarose-based gel were firstly determined in diffusion cell experiments and ranged from 7.19 × 10^-6 to 7.49 × 10^-6 cm/s. The capacities of HLB-DGT for MNCB, PNCB, ONCB, and CDNB were higher than 114.65, 117.52, 117.72, and 37.58 μg/cm², respectively. The HLB-DGT performance on NCBs determination was demonstrated to be independent of natural fluctuations in pH (3-9), ionic strength (0.001-0.5 M), and dissolved organic matter concentrations (0-20 mg/L) and of deployment time (0-120 h). In the field application, the DGT-based method to measure NCBs not only proved to be accurate and effective, but also performed better than the grab sampling method under the variable conditions. This study demonstrates that the newly developed in-situ method based on DGT can provide an attractive alternative for the routine monitoring of NCBs in aquatic environments.

The toxic potentials and focus of disinfection byproducts based on the human embryonic kidney (HEK293) cell model

Disinfection byproducts (DBPs) are inevitably generated during drinking water disinfection processes, and their hazards have not been well characterized. Because they plausibly cause toxicological and pathological damage to human kidney, we selected the human embryonic kidney (HEK293) cell, instead of the commonly used CHO cell, as a model to investigate the toxic potential and target of 10 DBPs, including 3 haloacetamides, 2 trihaloacetaldehydes and 5 iodomethanes. Based on the chronic toxicity parameter EC₁₀ of the cell viability test, we obtained a toxic rank of the tested DBPs different from previous studies and calculated their risk quotients by combining their actual concentrations in drinking water systems. Then, dichloroacetamide (DCAM), trichloroacetaldehyde (TCAL), and bromochloroiodomethane (BCIM) were selected to conduct multiple mechanistic bioassays, including cellular lactate dehydrogenase (LDH) assay, ATP metabolism, ROS production, mitochondria-derived apoptosis and qRT-PCR assay. All bioassays revealed the effects of interrupting the molecular, physiological and biochemical processes relevant to mitochondrial functions, such as oxidative respiration, apoptosis, and energy metabolism. Our study improved the human risk assessment of DBPs with the help of a convenient model and parameter and revealed that mitochondrion is a potential toxic focus of DBPs exposure at the cellular level.

Occurrence, removal and risk assessment of pharmaceutical and personal care products (PPCPs) in an advanced drinking water treatment plant (ADWTP) around Taihu Lake in China

The occurrence and removal of 39 selected pharmaceutical and personal care products (PPCPs) were investigated in an advanced drinking water treatment plant (ADWTP) around Taihu Lake. Fourteen of 39 targeted pharmaceuticals were detected in the raw water. After a series of purification processes, only indomethacin, caffeine and sulfamethoxazole were found in effluent, albeit at concentrations less than 2 ng L(-1). The results of principal component analysis suggested that three main purification processes, oxidation, coagulation combined with sedimentation and filtration combined with bio-degradation, influenced the removal performance of PPCPs. The ecotoxicological and human health risk assessment confirmed that drugs detected in effluent posed no potential toxicity and also suggested that two PPCPs (roxithromycin and sulfamethoxazole), especially sulfamethoxazole, should be seriously considered as candidates for regulatory monitoring and prioritization. Finally, the correlation between removal efficiency and risk quotient indicated that uniform removal efficiency for all PPCPs may not reflect an equal risk control in the ADWTP.

Global transcriptomic responses of Escherichia coli K-12 to volatile organic compounds

Volatile organic compounds (VOCs) are commonly used as solvents in various industrial settings. Many of them present a challenge to receiving environments, due to their toxicity and low bioavailability for degradation. Microorganisms are capable of sensing and responding to their surroundings and this makes them ideal detectors for toxic compounds. This study investigates the global transcriptomic responses of Escherichia coli K-12 to selected VOCs at sub-toxic levels. Cells grown in the presence of VOCs were harvested during exponential growth, followed by whole transcriptome shotgun sequencing (RNAseq). The analysis of the data revealed both shared and unique genetic responses compared to cells without exposure to VOCs. Results suggest that various functional gene categories, for example, those relating to Fe/S cluster biogenesis, oxidative stress responses and transport proteins, are responsive to selected VOCs in E. coli. The differential expression (DE) of genes was validated using GFP-promoter fusion assays. A variety of genes were differentially expressed even at non-inhibitory concentrations and when the cells are at their balanced-growth. Some of these genes belong to generic stress response and others could be specific to VOCs. Such candidate genes and their regulatory elements could be used as the basis for designing biosensors for selected VOCs.

Removal of emerging contaminants by pre-mixed PACl and carbonaceous materials

In this study, pre-mixed poly aluminum chloride (PACl) and super powdered activated carbon (SPAC)/carbon nanotubes (CNT) were employed for the removal of emerging contaminants (ECs) from various water sources.

Performance of different carbonaceous materials for emerging pollutants adsorption

The adsorption of three representative emerging pollutants over different kinds of carbonaceous adsorbents has been studied in this work. The adsorbates were nalidixic acid (NAL, representative of a pharmaceutical), 1,8-dichlorooctane (DCO, a chloroparaffin) and methyl-phenoxy-ethanol (MPET, a surfactant). Activated carbons, carbon nanofibers, carbon nanotubes and high surface area graphites have been tested as adsorbents. Adsorption isotherms, carried out in a batch system, were fitted using both a Langmuir and a Freundlich model. It was shown that the capacity of adsorption follows the order DCO≫NAL>MPET for all the adsorbents, and among the adsorbents, the external morphology (surface area and mesoporous volume) is the key parameter. The results from thermodynamic analysis show, however, that both morphological and chemical properties of both adsorbates and adsorbents influenced their behavior.