Adsorption behavior of Ni(II) onto activated carbons from hide waste and high-pressure steaming hide waste

Application Prospect of Ion-Imprinted Polymers in Harmless Treatment of Heavy Metal Wastewater

With the rapid development of industry, the discharge of heavy metal-containing wastewater poses a significant threat to aquatic and terrestrial environments as well as human health. This paper provides a brief introduction to the basic principles of ion-imprinted polymer preparation and focuses on the interaction between template ions and functional monomers. We summarized the current research status on typical heavy metal ions, such as Cu(II), Ni(II), Cd(II), Hg(II), Pb(II), and Cr(VI), as well as metalloid metal ions of the As and Sb classes. Furthermore, it discusses recent advances in multi-ion-imprinted polymers. Finally, the paper addresses the challenges faced by ion-imprinted technology and explores its prospects for application.

Insight into the role of heterogeneous Fenton-like catalyst FeCo-γ-Al2O3 with dual electron-rich centers for Ni-EDTA removal

To enhance the polarization distribution of electron cloud density on the catalyst surface, we have introduced a novel bimetallic-substituted dual-reaction center (DRC) catalyst (FeCo-γ-Al2O3) comprising iron (Fe) and cobalt (Co) for the decomplexation and mineralization of heavy metal complex Ni-EDTA in this study. Compared to the catalysts doped solely with Fe or Co, the bimetal-doped catalyst offered several advantages, including enhanced electron cloud polarization distribution, additional electron transfer pathway, and improved capacity of free radical generation. Through DFT calculations and EPR tests, we have elucidated the influences of the catalyst's adsorption toward Ni-EDTA and its decomplexation products on the electron transfer between the pollutant and the catalyst. The competition between the pollutants and H2O2 affects the generation of free radicals in both electron-rich Fe and Co centers as well as electron-deficient Al center. Building on these findings, we have proposed a plausible removal mechanism of Ni-EDTA using the heterogeneous Fenton-like catalyst FeCo-γ-Al2O3. This study sheds light on the potential of FeCo-γ-Al2O3 as a DRC catalyst and emphasizes the significance of pollutant characteristics in determining the catalyst's performance.

Impact of carbonization conditions and adsorbate nature on the performance of activated carbon in water treatment

The physical and chemical structure of activated carbon (AC) varies with the carbonization temperature, activation process and time. The texture and toughness of the starting raw material also determine the morphology of AC produced. The Brunauer-Emmet-Teller surface area (SBET) is small for AC produced at low temperatures but increases from 500 to 700 °C, and generally drops in activated carbons synthesized > 700 °C. Mild chemical activators and low activator concentrations tend to generate AC with high SBET compared to strong and concentrated oxidizing chemicals, acids and bases. Activated carbon from soft starting materials such as cereals and mushrooms have larger SBET approximately twice that of tough materials such as stem berks, shells and bones. The residual functional groups observed in AC vary widely with the starting material and tend to reduce under extreme carbonization temperatures and the use of highly concentrated chemical activators. Further, the adsorption capacity of AC shows dependency on the size of the adsorbate where large organic molecules such as methylene blue are highly adsorbed compared to relatively small adsorbates such as phenol and metal ions. Adsorption also varies with adsorbate concentration, temperature and other matrix parameters.

Advances of Biowaste-Derived Porous Carbon and Carbon–Manganese Dioxide Composite in Supercapacitors: A Review

One of the global problems is environmental pollution by different biowaste. To solve the problem, biowaste must be recycled. Waste-free technology is also a way of saving exhaustible raw materials. Research on electrochemical energy sources is currently the most dynamically developing area of off-grid energy. Electrochemical capacitors can operate for a long time without changing performance, they have smaller dimensions, high mechanical strength, and a wide operating temperature range. These properties are effective energy-saving devices. Therefore, supercapacitors are widely used in various industries. This review discussed the methods of obtaining and the characteristics of biowaste-derived activated carbon and carbon–manganese oxide (AC-MnO2)-based supercapacitor electrodes.

Nanoporous carbon materials as a sustainable alternative for the remediation of toxic impurities and environmental contaminants: A review

Due to rapidly deteriorating water resources, the world is looking forward to a sustainable alternative for the remediation of noxious pollutants such as heavy metals and organic and gaseous contaminants. To address this global issue of environmental pollution, nanoporous carbon materials (NPCMs) can be used as a one-stop solution. They are widely applied as adsorbents for many toxic impurities and environmental contaminants. The present review provides a detailed overview of the role of different synthesis factors on the porous characteristics of carbon materials, activating agents, reagent-precursor ratio and their potential application in the remediation. Findings revealed that synthetic parameters result in the formation of microporous NPCMs (S_BET: >4000 m³/g; V_Total (cm³/g) ≥ 2; V_Micro (cm³/g) ≥ 1), micromesoporous (S_BET: >2500 m³/g; V_Total (cm³/g) ≥ 1.5; V_Micro (cm³/g) ≥ 0.7) and mesoporous (S_BET: >2500 m³/g; V_Total (cm³/g) ≥ 1.5; V_Micro (cm³/g) ≥ 0.5) NPCMs. Moreover, it was observed that a narrow pore size distribution (0.5-2.0 nm) yields excellent results in the remediation of noxious contaminants. Further, chemical activating agents such as NaOH, KOH, ZnCl₂, and H₃PO₄ were compared. It was observed that activating agents KОН, H₃PO₄, and ZnCl₂ were generally used and played a significant role in the possible large-scale production and commercialization of NPCMs. Thus, it can be interpreted that with a well-planned strategy for the synthesis, NPCMs with a "tuned" porosity for a specific application, in particular, microporosity for the accumulation and adsorption of energetically important gases (CO₂, CH₄, H₂), micro-mesoporosity and mesoporosity for high adsorption capacity for towards metal ions and a large number of dyes, respectively.

Remediation of heavy metal polluted waters using activated carbon from lignocellulosic biomass: An update of recent trends

The use of a cheap and effective adsorption approach based on biomass-activated carbon (AC) to remediate heavy metal contamination is clearly desirable for developing countries that are economically disadvantaged yet have abundant biomass. Therefore, this review provides an update of recent works utilizing biomass waste-AC to adsorb commonly-encountered adsorbates like Cr, Pb, Cu, Cd, Hg, and As. Various biomass wastes were employed in synthesizing AC via two-steps processing; oxygen-free carbonization followed by activation. In recent works related to the activation step, the microwave technique is growing in popularity compared to the more conventional physical/chemical activation method because the microwave technique can ensure a more uniform energy distribution in the solid adsorbent, resulting in enhanced surface area. Nonetheless, chemical activation is still generally preferred for its ease of operation, lower cost, and shorter preparation time. Several mechanisms related to heavy metal adsorption on biomass wastes-AC were also discussed in detail, such as (i) - physical adsorption/deposition of metals, (ii) - ion-exchange between protonated oxygen-containing functional groups (-OH, -COOH) and divalent metal cations (M²⁺), (iii) - electrostatic interaction between oppositely-charged ions, (iv) - surface complexation between functional groups (-OH, O^2-, -CO-NH-, and -COOH) and heavy metal ions/complexes, and (v) - precipitation/co-precipitation technique. Additionally, key parameters affecting the adsorption performance were scrutinized. In general, this review offers a comprehensive insight into the production of AC from lignocellulosic biomass and its application in treating heavy metals-polluted water, showing that biomass-originated AC could bring great benefits to the environment, economy, and sustainability.

Synthesis of Magnetic Short-Channel Mesoporous Silica SBA-15 Modified with a Polypyrrole/Polyaniline Copolymer for the Removal of Mercury Ions from Aqueous Solution

A novel magnetic short-channel mesoporous silica SBA-15 composite adsorbent was prepared by the copolymerization of pyrrole and aniline. The prepared novel nanoadsorbent polypyrrole-polyaniline/CoFe2O4-SBA-15 (PPy-PANI/M-SBA-15) has a significant adsorption effect on heavy metal mercury ions. The batch adsorption experiment was carried out to study the effects of various parameters including solution pH, initial concentration (C 0), adsorbent dose (dosage), temperature (T), and contact time on the adsorption effect. The analysis results of the response surface method (RSM) and central composite design (CCD) show that the importance for adsorption factors is pH > C 0 > T > dosage, and the maximum capacity of PPy-PANI/M-SBA-15 is 346.2 mg/g under the optimal conditions of pH = 6.7, T = 310 K, C 0 = 29.5 mg/L, and a dosage of 0.044 g/L. The pseudo-second-order kinetic model and the Langmuir isotherm model simulate the adsorption behavior of mercury ions. In addition, thermodynamic parameters indicate self-heating and reversible adsorption processes. A covalent bond is formed between the nitrogen-containing functional group and the mercury ions. Excellent magnetic properties and high reproducibility indicate that PPy-PANI/M-SBA-15 has excellent recyclability and environmentally friendly properties and can become a potential heavy metal ion adsorbent in practical applications.

Removal of Cadmium from Contaminated Groundwater Using a Novel Silicon/Aluminum Nanomaterial: An Experimental Study

Cadmium (Cd) is a harmful element to human health and biodiversity. The removal of Cd from groundwater is of great significance to maintain the environmental sustainability and biodiversity. In this work, a novel low-temperature roasting associated with alkali was applied to synthesize an eco-friendly adsorbent using coal fly ash. Scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray fluorescence, and X-ray photoelectron spectroscopy were applied to analyze the physical and chemical characteristics of the adsorbent. The experiments show that a significant improvement in specific surface area and activity of adsorbent was observed in this study. The functional groups of Na-O and Fe-O were verified to be beneficial in the removal of Cd²⁺. The material capacity to adsorb Cd²⁺ was considerably improved, and the maximum uptake capacity was 61.8 mg g^-1 for Cd²⁺ at 25 °C. Furthermore, pH and ionic strength play critical roles in the adsorption process. The Langmuir and pseudo-second-order models can appropriately describe the adsorption behavior, and the enhanced adsorption ability of Cd²⁺ by modified coal fly ash was attributed to ion-exchange, co-precipitation, and complexation. Higher sorption efficiency was maintained after two regeneration cycles. These results offer valuable insights to develop high-performance adsorbent for Cd²⁺ removal.

Insight into activated carbon from different kinds of chemical activating agents: A review

Activated carbon (AC) is an important material in various fields owing to its low cost, well-developed porosity, and favorable chemical stability. Key factors for the optimal synthesis of AC are the carbon precursors, activation pathways, activating agents, and design of the procedure parameters. So far, no case studies have reviewed the activating agents used during the chemical activation process. Accordingly, the present review provides a summary of recent research, highlighting the development of activating agents during the process of AC. Detailed lists of pore-forming mechanisms by various activating agents, including alkaline, acidic, neutral, and self-activating agents, have been systematically summarized. Furthermore, the effects of activating agents on the experimental procedures have also been established. Finally, a comprehensive discussion about the influences of activating agents on the physical and chemical properties of the resultant AC is included. The objective of this study is to reveal and distinguish the individual roles of different activating agents during AC synthesis.

Adsorption behavior and mechanism of five pesticides on microplastics from agricultural polyethylene films

Polyethylene (PE) agricultural soil films are easily embrittled and decomposed to microplastics (MPs) in environment. As widely used pesticides in vegetable farmland, carbendazim, dipterex, diflubenzuron, malathion, difenoconazole have potential environmental and human safety risks. They are often coexisting with MPs in the environment, and may cause consequential pollution to the ecosystem. Studying the adsorption behavior between pesticides and PE agricultural soil films MPs would be helpful for the risk assessment of co-exposure of pesticides and MPs. Herein, a systematic study on batch adsorption experiments was performed to determine the adsorption process of pesticides on MPs, the environmental factors on adsorption capacity were evaluated, and the adsorption mechanisms were discussed. Results suggested that all these five pesticides can adsorb on MPs, especially for diflubenzuron and difenoconazole. The adsorption kinetics and isotherm fitted to the Pseudo-second-order and Freundlich model, respectively, indicating that besides the adsorption onto surface sites, mass transfer and intraparticle diffusion were involved in the adsorption process, and the adsorption process was mostly controlled by physical and chemical interactions. The adsorption amounts of 5 pesticides on PE MPs follow the order of DIF > DIFE > MAL > CAR > DIP with K_F correlated positively with octanol-water partition coefficients (LogK_ow). The thermodynamic study indicates the adsorption of all pesticides as spontaneous and exothermic processes. The results of this study illustrated that PE MPs can be a good carrier of pesticides in agricultural field.

Electrochemical recovery of cobalt using nanoparticles film of copper hexacyanoferrates from aqueous solution

Nanoparticles film of copper metal hexacyanoferrates (CuHCF) was fabricated to electrochemically separate Co²⁺ in aqueous solutions under various conditions such as applied potential, solution pHs, initial concentrations, contact time and coexisting ions. Results showed that the removal efficiency conducted in reduction potential was obviously higher than that in oxidation potential. The optimal pH for Co²⁺ adsorption occurred at 8.0. Coexisting ions studies revealed that Co²⁺ could be removed from aqueous solutions containing Li⁺, Cu²⁺ and Al³⁺. Considering that cobalt and lithium are the main metallic elements in LiCoO₂, the effect of different ionic strengths (IS) of LiNO₃ (0.5, 1, 2, 5, 10) on adsorption was further investigated. Results showed that IS of LiNO₃ had little impact on the removal efficiency of Co²⁺, which indicated the potential of selective recovery of cobalt from LiCoO₂ in spent lithium-ion batteries. X-ray energy-dispersion spectroscopy (EDS) confirmed that the Co²⁺ could be adsorbed effectively onto CuHCF film. The adsorption was well described by Langmuir isotherm and the maximum sorption capacity is 218.82 mg/g. The kinetic rate of Co²⁺ adsorption was rapid initially and attained equilibrium within 60 min, and the data well fitted the Redlich-Peterson and the Elovich model, implying a chemisorption dominated process.

Preparation of nitric acid modified powder activated carbon to remove trace amount of Ni(II) in aqueous solution

The present study investigated the preparation of nitric acid modified powder activated carbon (MPAC) and its adsorption of trace amounts of Ni(II) from aqueous solution. Results showed that raw powder activated carbon modified with 15% nitric acid (MPAC-15%) had the most developed pore structure and the highest adsorption efficiency for Ni(II) in aqueous solution. For MPAC-15%, the pore width was dominated by micropores with pore width about 1 nm and the total amount of chemical functional groups of MPAC-15% was 0.6630 mmol/g. Ni(II) adsorption tests indicated that the highest adsorption efficiency of MPAC-15% was 98%. The adsorption saturation time of MPAC-15% was about 120 min and the pH-dependent adsorption test showed that neutral conditions (6.5 < pH < 7.5) were suitable for Ni(II) adsorption. The adsorption kinetic analysis revealed that the pseudo-second order adsorption model fitted the adsorption process significantly. Thus, Ni(II) adsorption by MPAC-15% was dominated not only by physical adsorption via highly developed micropores but also by chemical adsorption between Ni(II) and surface functional groups. Adsorption isotherm analysis illustrated the Langmuir model was favorable for the adsorption of Ni(II), with R² = 0.9874.