Azo dyes degradation and mutagenicity evaluation with a combination of microbiological and oxidative discoloration treatments

Enhanced degradation of Direct Red 80 dye via Fenton-like process mediated by cobalt ferrite: generated superoxide radicals and singlet oxygen

Azo dyes, widely used in the textile industry, contribute to effluents with significant organic content. Therefore, the aim of this work was to synthesize cobalt ferrite (CoFe2O4) using the combustion method and assess its efficacy in degrading the azo dye Direct Red 80 (DR80). TEM showed a spherical structure with an average size of 33 ± 12 nm. Selected area electron diffraction and XRD confirmed the presence of characteristic crystalline planes specific to CoFe2O4. The amount of Co and Fe metals were determined by ICP-OES, indicating an n(Fe)/n(Co) ratio of 2.02. FTIR exhibited distinct bands corresponding to Co-O (455 cm-1) and Fe-O (523 cm-1) bonds. Raman spectroscopy detected peaks associated with octahedral and tetrahedral sites. For the first time, the material was applied to degrade DR80 in an aqueous system, with the addition of persulfate. Consistently, within 60 min, these trials achieved nearly 100% removal of DR80, even after the material had undergone five cycles of reuse. The pseudo-second-order model was found to be the most fitting model for the experimental data (k2 = 0.07007 L mg-1 min-1). The results strongly suggest that degradation primarily occurred via superoxide radicals and singlet oxygen. Furthermore, the presence of UV light considerably accelerated the degradation process (k2 = 1.54093 L mg-1 min-1). The material was applied in a synthetic effluent containing various ions, and its performance consistently approached 100% in the photo-Fenton system. Finally, two degradation byproducts were identified through HPLC-MS/MS analysis.

Physicochemical assessment of industrial effluents of Kala Sanghian drain, Punjab, India

The discharge of industrial effluents has a significant impact on the Water Quality Index (WQI) of the water bodies and is a major source of contamination of groundwater. The present study investigated the physicochemical characteristics and scrutinized the pollution potential of the tannery, textile, and electroplating effluents uploading into the Kala Sanghian drain, located in Jalandhar, Punjab, India. In this study, 12 samples were collected from the four sites (leather complex drain (LD), leather complex outlet (LO), focal point drain (FD), and Bulandpur drain (BD)) of Kala Sanghian drain in the dry season. The result showed that the drain under consideration is very much contaminated and the water is not suitable for irrigation and agricultural purposes. Rather it has a bad impact on the health of local people, the physiology of aquatic organisms, and the soil quality of agricultural land nearby. The present study confirmed the water quality index was more than 100, indicating a highly contaminated drain and water is unfit for any use. The correlation analysis shows that there exists a positive correlation between TDS and temperature (r = 0.994), DO and pH (r = 0.808), BOD and temperature (r = 0.987), BOD and TDS (r = 0.978), EC and temperature (r = 0.963), EC and TDS (r = 0.954), and EC and BOD (r = 0.956). The principal component analysis (PCA) confirms that PC1 alone has more than 89% of the variance with high positive loading for TDS, temperature, EC, and BOD. The hierarchical cluster analysis (HCA) reflected two clusters where cluster 1 consists of pH, DO, temperature, and BOD of water while cluster 2 consists of TDS and EC of water. The PCA and HCA study of the data set confirms the high degree contribution of anthropogenic activities through the application of chemicals in agriculture, disposal of municipal waste, and industrial effluents in the deterioration of water quality. The results of the study will help to enhance the sustainable action plan for the management of industrial effluents in the studied area.

Modeling and optimization of biodegradation of methylene blue by Staphylococcus aureus through a statistical optimization process: a sustainable approach for waste management

Bacterial species for metabolizing dye molecules were isolated from textile wastewater. The best microbial species for such an application was selected amongst the isolated bacterial populations by conducting methylene blue (MB) batch degradation studies with the bacterial strains. The most suitable bacterial species was Staphylococcus aureus (S. aureus). Process parameters were optimized using Full Factorial Design (FFD) and under the optimum conditions (pH of 5, temperature of 35 °C, 150 ppm, and time of 8 h). Response Surface Methodology (RSM) modeling technique was applied to model the process and their performance and predictive capabilities of the response (removal efficiency) was also examined. When tested with 20 ppm dye using batch reactors, the maximum COD and color removal efficiencies, were found to be 88% and 98%, respectively. Our results showed that Staphylococcus aureus had a high decolorization capacity. UV-Visible and Fourier-transform infrared (FTIR) spectroscopy analysis confirmed the biodegradation of MB. Using phytotoxicity and mutagenicity endpoints, toxicological studies of MB before and after biodegradation were studied. Toxicity assay signaled that biodegradation led to the detoxification of MB dye.

Fabrication of Nano Iron Oxide–Modified Biochar from Co-Hydrothermal Carbonization of Microalgae and Fe(II) Salt for Efficient Removal of Rhodamine B

Dye adsorption by magnetic modified biochar has now received growing interest due to its excellent adsorption performance and facile separation for recycling. In this study, nano iron oxide–modified biochar was fabricated via the successive hydrothermal-pyrolyzing method using Chlorella vulgaris (Cv) and FeSO₄·7H₂O as raw materials, and its adsorption on Rhodamine B (RhB) in aqueous solution was studied. Multiple techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET), vibrating sample magnetometry (VSM) and X-ray photoelectron spectroscopy (XPS) were employed to comprehensively characterize the structure, morphology and physicochemical properties of the adsorbent. The as-synthesized nano iron oxide–modified biochar (CBC-Fe(II)) exhibited a large surface area (527.6 m²/g) and high magnetic saturation value (13.7 emu/g) to facilitate magnetic separation. Compared with CBC and CBC-Fe(III), CBC-Fe(II) exhibited superior adsorption ability towards RhB in aqueous solution, with a maximum adsorption capacity of 286.4 mg/g. The adsorption process of RhB onto CBC-Fe(II) was well described by the pseudo-second-order kinetic model and Langmuir isotherm model, indicating monolayer chemisorption behaviors for the adsorption system. Facile preparation, great adsorption performance and magnetic recovery properties endow CBC-Fe(II) to be a promising adsorbent for dye removal.

Efficient removal of azo dyes by Enterococcus faecalis R1107 and its application in simulated textile effluent treatment

This study aimed to exploit the potential of Enterococcus faecalis R1107 in the bioremediation of azo dyes. The maximal decolorization of Congo Red (CR), Reactive Black 5 (RB5), and Direct Black 38 (DB38) were 90.17%, 96.82%, and 81.95%, respectively, with the bacterial treatment for 48 h. 65.57% of CR and 72.64% of RB5 could be decolorized by E. faecalis R1107 within 48 h when the concentration of azo dyes increased up to 1000 mg/L. FTIR analysis confirmed that E. faecalis R1107 could effectively break down the chemical structures of three azo dyes. E. faecalis R1107 alleviated the phytotoxicity of azo dyes and improved seed germination, which contributed to the increase in the lengths of roots, stems, and leaves of Vigna radiata seedlings. Transcriptomic analysis suggested that the gene regulatory networks in E. faecalis R1107 synergistically improved the degradation and detoxification of RB5, including the major metabolic pathways, the secondary metabolism, the transport system, the amino acid metabolic pathways, and the signal transduction systems. Simulated textile effluent (STE) was used to mimic real textile effluent to evaluate the bioremediation potential of E. faecalis R1107, and 72.79% STE can be decolorized after E. faecalis R1107 treatment for 48 h. In summary, our study demonstrated that E. faecalis R1107 might be well suitable for potential applications in the bioremediation of textile effluent.

Comparison of reactive azo dye removal with UV/H2O2, UV/S2O82- and UV/HSO5- processes in aqueous solutions

Advanced oxidation processes (AOPs) are an effective choice for removal of reactive azo dyes used in the textile industry due to high solubility and low degradability. Within the scope of this study, reactive orange 122 (RO122) azo dye was removed using the UV-based AOPs of ultraviolet (UV) radiation, UV/hydrogen peroxide (UV/H₂O₂), UV/persulfate (UV/S₂O₈^2-), and UV/peroxymonosulfate (UV/HSO₅^-). Oxidant concentration, initial solution pH, initial RO122 concentration, different anions (Cl^-, NO₃^- and SO₄^2-), and solution temperature effects were compared. With only UV radiation (254 nm), 19.5% RO122 removal occurred at the end of 120 min. The RO122 removal reduced with the UV/oxidant processes at pH 9. Experimental results revealed RO122 removal followed pseudo-first-order (PFO) kinetics. There was a linear correlation identified between initial oxidant concentration and the PFO kinetic rate constant (k₁). Among the three UV-based processes, with oxidant concentration 50 mg/L, temperature 20 °C, and pH 5, RO122 removal efficiency was in the order UV/H₂O₂ > UV/HSO₅^- > UV/S₂O₈^2-. RO122 removal rate increased as initial oxidant concentration and temperature increased and reduced as initial RO122 concentration increased. Energy requirements and oxidant costs were assessed. The UV/H₂O₂ process was concluded to be the most efficient and economic process for RO122 removal.

Modification of cyclodextrin and use in environmental applications

Water pollution, which has become a global problem in parallel with environmental pollution, is a problem that needs to be solved urgently, considering the gradual depletion of water resources. The inadequacy of the water treatment methods and the materials used somehow directed the researchers to look for dual character structures such as biocompatible and biodegradable β-cyclodextrin (β-CD). β-CD, which is normally insoluble in water, is used in demanding wastewater applications by being modified with the help of different agents to be water soluble or transformed into polymeric adsorbents as a result of co-polymerization via cross-linkers. In this way, in addition to the host-guest interactions offered by β-CD, secondary forces arising from these interactions provide advantages in terms of regeneration and reusability. However, the adsorption efficiency and synthesis steps need to be improved. Based on the current studies presented in this review, in which cross-linkers and modification methods are also mentioned, suggestions for novel synthesis methods of new-generation β-CD-based materials, criticisms, and recent methods of removal of micropollutants such as heavy metals, industrial dyes, harmful biomolecules, and pharmaceutics wastes are mentioned.

Adsorption of Azo-Anionic Dyes in a Solution Using Modified Coconut (Cocos nucifera) Mesocarp: Kinetic and Equilibrium Study

The effect of adsorbent dose and initial concentration on removing the azo-anionic dyes Congo Red andtartrazine present in a synthetic aqueous solution was studied using natural cellulose (CC) and modified cationic cellulose (MCC) from coconut mesocarp. Three levels of adsorbent dosage (5, 8 and 12 mg/L) and initial concentration (40, 70 and 100 mg/L) were used. Cetyl trimethyl ammonium chloride (CTAC) was used as a modifying agent. TGA and DSC showed that the extracted cellulose was of good quality, composed mostly of cellulose with lignin and hemicellulose traces, and 8% moisture. The FTIR spectrum showed the effectiveness of the modification in the structure of the material with symmetric deformation of the C6H6-Cl group in 1472 cm−1 present in the CTAC. It was found that decreasing the adsorbent dosage and increasing the initial concentration favored the dyes’ adsorption capacity on the two bioadsorbents. Tartrazine removals of 5.67 mg/g on CC and 19.61 mg/g on MCC were achieved, and for CR of 15.52 mg/g on CC and 19.99 with MCC with removal percentages over 97% with the quaternized biomass in all cases. The kinetic and equilibrium study was carried out to identify the mechanisms involved in the adsorption process. The Freundlich model can describe the equilibrium isotherm data of tartrazine on CC and MCC. In contrast, those of CR is defined by the Langmuir and Dubinin–Radushkevic models for CC and MCC, respectively Adsorption kinetics showed that equilibrium was reached at 30 min, with rapid adsorption in the initial minutes with the removal of about 97% of the contaminant in the first 5 min; fitting to kinetic models showed that the kinetics of tartrazine on CC was fitted by Elovich (R2 = 0.756), and on MCC the Elovich (R2 = 0.887) and pseudo-second-order (R2 = 0.999) models. Removing CR on CC was fitted by pseudo-first-order, pseudo-second-order and Elovich models (R2 > 0.98), and when using MCC, all models show a good fitting with R2 = 0.99 in all cases.

Microbial degradation of dyes: An overview

Industrialization increases use of dyes due to its high demand in paper, cosmetic, textile, leather and food industries. This in turn would increase wastewater generation from dye industrial activities. Various dyes and its structural compounds present in dye industrial wastewater have harmful effects on plants, animals and humans. Synthetic dyes are more resistant than natural dyes to physical and chemical methods for remediation which makes them more difficult to get decolorize. Microbial degradation has been researched and reviewed largely for quicker dye degradation. Genetically engineered microorganisms (GEMs) play important role in achieving complete dye degradation. This paper provides scientific and technical information about dyes & dye intermediates and biodegradation of azo dye. It also compiles information about factors affecting dye(s) biodegradation, role of genetically modified organisms (GMOs) in process of dye(s) degradation and perspectives in this field of research.