Perfluoroalkyl substances (PFASs) in air-conditioner filter dust of indoor microenvironments in Greece: Implications for exposure

There's Something in What We Eat: An Overview on the Extraction Techniques and Chromatographic Analysis for PFAS Identification in Agri-Food Products

Per- and polyfluorinated alkyl substances (PFASs) are a group of anthropogenic chemicals used in a range of industrial processes and consumer products. Recently, their ubiquitous presence in the environment as well as their toxicological effects in humans have gained relevant attention. Although the occurrence of PFASs is widely investigated in scientific community, the standardization of analytical method for all matrices still remains an important issue. In this review, we discussed extraction and detection methods in depth to evaluate the best procedures of PFAS identification in terms of analytical parameters (e.g., limits of detection (LODs), limits of quantification (LOQs), recoveries). Extraction approaches based on liquid-liquid extraction (LLE), alkaline digestion, and solid phase extraction (SPE), followed by liquid chromatography-mass spectrometry (LC-MS) and gas chromatography-mass spectrometry (GC-MS) analysis are the main analytical methods applied in the literature. The results showed detectable recoveries of PFOA and PFOS in meat, milk, vegetables, eggs products (90.6-101.2% and of 89.2-98.4%), and fish (96-108%). Furthermore, the low LOD and LOQ values obtained for meat (0.00592-0.01907 ng g-1; 0.050 ng g-1), milk (0.003-0.009 ng g-1; 0.010-0.027 ng g-1), fruit (0.002-0.009 ng g-1; 0.006-0.024 ng g-1), and fish (0.00369-0.017.33 ng g-1; 0.05 ng g-1) also confirmed the effectiveness of the recent quick, easy, cheap, effective, rugged, and safe method (QuEChERS) for simple, speedy, and sensitive ultra-trace PFAS analysis.

Per- and polyfluoroalkyl substance (PFAS) mixtures induce gut microbiota dysbiosis and metabolic disruption in silkworm (Bombyx mori L.)

Mixed legacy and emerging per- and polyfluoroalkyl substances (PFASs) are commonly found in soil and dust; however, the potential toxicity of PFAS mixtures (mPFASs) in insects is unknown. Using 16S rRNA gene sequencing and transcriptome sequencing (RNA-Seq), we evaluated the adverse effects of mPFASs on silkworms, a typical lepidopteran insect. After exposure to mPFASs, the silkworm midgut was enriched with high levels of PFASs, which induced histopathological changes. The composition of the midgut microbiota was significantly affected by mPFAS exposure, and functional predictions revealed significant disruption of some metabolic pathways. RNA-seq analysis revealed that mPFASs significantly changed the transcription profiles. Functional enrichment analysis of the differentially expressed genes also revealed that biological processes related to metabolic pathways and the digestive system were significantly affected, similar to the results of the gut microbiota analysis, suggesting that mPFAS exposure had an adverse effect on the metabolic function of silkworms and may further affect their normal growth. Finally, the significant correlation between abundance changes in the gut microbiota and metabolism/digestion-related genes further highlighted the role of the gut microbiota in mPFAS-related processes affecting the metabolic functions of silkworms. To our knowledge, this study is the first to evaluate the toxic effects of mPFASs in insects and provide basic data for further PFAS toxicity investigations in insects and comprehensive ecological risk assessments of mPFASs.

Occupational exposure to per- and polyfluoroalkyl substances: a scope review of the literature from 1980-2021

BACKGROUND

Per- and polyfluoroalkyl substances (PFAS) comprise a large group of chemicals that have been integrated into a wide variety of industrial processes and consumer products since the 1950s. Due to their profuse usage and high persistence in human serum, understanding workplace exposures to PFAS is critical.

OBJECTIVE

We aimed to characterize the PFAS exposure profiles of relevant occupational populations, elucidate trends in the PFAS exposure characterization process, and identify major research gaps that remain within the occupational PFAS exposure literature.

METHODS

A systematic search of four literature databases for peer-reviewed articles published between 1980 and 2021 on PFAS exposure in occupational settings was conducted.

RESULTS

Of the 2574 articles identified, 92 met the inclusion criteria. Fluorochemical workers were the target population in most early exposure assessment research; however, studies conducted within the last 10 years have evaluated a wider range of occupational populations and settings. The highest exposures were reported in fluorochemical workers, but, in comparison to reference populations, one or more PFAS were elevated in most workers and in most workplaces that were assessed. PFAS was most frequently assessed in worker serum using a discrete analytical panel of PFAS, with earlier studies restricted to a few long-alkyl chain PFAS while more recent studies have included more expansive panels due to more robust methods.

SIGNIFICANCE

Characterization of occupational exposure to PFAS is limited but expanding. Current analytical methods are not robust enough to fully capture the potential range of PFAS present across different workers and workplaces. While exposures to PFAS for certain occupational groups have been studied in detail, exposure information for other occupational groups with high potential for exposure are limited. This review highlights substantial findings and major research gaps within the occupational literature.

An overview on human exposure, toxicity, solid-phase microextraction and adsorptive removal of perfluoroalkyl carboxylic acids (PFCAs) from water matrices

Perfluoroalkyl carboxylic acids (PFCAs) are sub-class of perfluoroalkyl substances commonly detected in water matrices. They are persistent in the environment, hence highly toxic to living organisms. Their occurrence at trace amount, complex nature and prone to matrix interference make their extraction and detection a challenge. This study consolidates current advancements in solid-phase extraction (SPE) techniques for the trace-level analysis of PFCAs from water matrices. The advantages of the methods in terms of ease of applications, low-cost, robustness, low solvents consumption, high pre-concentration factors, better extraction efficiency, good selectivity and recovery of the analytes have been emphasized. The article also demonstrated effectiveness of some porous materials for the adsorptive removal of the PFCAs from the water matrices. Mechanisms of the SPE/adsorption techniques have been discussed. The success and limitations of the processes have been elucidated.

Up in the air: Polyfluoroalkyl phosphate esters (PAPs) in airborne dust captured by air conditioning (AC) filters

Per- and polyfluoroalkyl substances (PFAS) are ubiquitously present in our indoor living environments. Dust is thought to accumulate PFAS released indoors and serve as an exposure pathway for humans. Here, we investigated whether spent air conditioning (AC) filters can be exploited as opportunistic samplers of airborne dust for assessing PFAS burden in indoor environments. Used AC filters from campus facilities (n = 19) and homes (n = 11) were analyzed for 92 PFAS via targeted ultra-high pressure liquid chromatography - tandem mass spectrometry (UHPLC-MS/MS). While 27 PFAS were measured (in at least one filter), the predominant species were polyfluorinated dialkylated phosphate esters (diPAPs), with the sum of 6:2-, 8:2-, and 6:2/8:2diPAPs accounting for approximately 95 and 98 percent of ∑₂₇PFAS in campus and household filters, respectively. Exploratory screening of a subset of the filters revealed the presence of additional species of mono-, di-, and tri-PAPs. Considering the constant human exposure to dust indoors and the potential of PAPs to degrade into terminal species with well-established toxicological risks, assessing dust for these precursor PFAS warrants further investigation with respect to both human health and PFAS loading to landfills from this under studied waste stream.

High density polyethylene (HDPE) and thermoplastic polyurethane (TPU) wristbands as personal passive samplers monitoring per- and polyfluoroalkyl substances (PFASs) exposure to postgraduate students

Per- and polyfluoroalkyl substances (PFASs) present adverse effects for human health, which result in strong needs for reliable tools monitoring personal exposure to PFASs. This study manufactured two wristbands of high density polyethylene (HDPE) and thermoplastic polyurethane (TPU), and used the wristbands to monitor PFASs personal exposure. The analytical method was developed to measure 32 PFASs in the paired HDPE and TPU wristbands worn by 60 postgraduates. Twenty-nine of 32 PFASs were detected and hexafluoropropylene oxide dimer acid (HFPO-DA) was predominant individual PFASs with median concentrations of 337 and 554 pg/g for HDPE and TPU wristbands respectively. The gender and grade of students had moderate effects on PFASs distribution in the wristbands. Higher PFASs levels were determined in the two wristbands worn by the male students compared to the females, and the greatest PFASs concentration was observed in the wristbands worn by the first-year postgraduates, follow by second- and third-year postgraduates. Additionally, significant correlations between paired HDPE and TPU wristbands were observed for perfluorobutanoic acid (PFBA), perfluorohexane sulfonic acid (PFHxS), perfluoroheptane sulfonic acid (PFHpS), perfluorooctane sulfonic acid (PFOS), and HFPO-DA. These results suggest that HDPE and TPU wristbands can be used as effective tools for monitoring personal PFAS exposure.

Concentration and distribution of metals, total fluorine, per- and poly-fluoroalkyl substances (PFAS) in vertical soil profiles in industrialized areas

The widespread usage of per- and poly-fluoroalkyl substances (PFAS) has caused great concern due to their potential toxicology to human and environmental health. However, there have been limited investigations on the vertical distribution of PFAS in fluorine (F) contaminated soils. In this study, the spatial and vertical distribution of metals, total F, and PFAS in the soil profiles were investigated at different areas in an industrial city. The higher F concentrations in the farmland soils with intensive agricultural activities suggested the impacts of soil tillage. The ΣPFAS concentrations ranged from 0.187 to 1.852 ng g^-1 in all soil samples, with PFOA as the dominant pollutant, which accounted for 17.2%-51.6% of the ΣPFAS in all samples. Highest level of PFAS was found in the shallow layer of the soil profiles. The long-chain PFAS such as PFUdA and PFTeDA tended to remain in the topsoil, while the short-chains (PFBA, PFPeA, and PFHxA) have migrated to depth of 100 cm in the vertical soil profile. The application of F-enriched phosphorus fertilizers and atmospheric deposition may be important sources of F and PFAS in soils in this area. Correlation analysis indicated that most of PFAS have similar common sources, and the significantly positive correlation between Zn and PFAS suggested they may share similar sources. This study highlights the need for further work to monitor the PFAS level in soil environments in industrialized areas, in addition to focusing on soil metal and F pollution.

Perfluoroalkyl acids in dust on residential indoor/outdoor window glass in Chinese cities: occurrence, composition, and toddler exposure

The dust on indoor and outdoor surfaces of the window glasses were collected using sterile cotton balls in 11 cities from China. Two sampling campaigns were conducted with the time interval of 7 days to investigate the accumulation especially during the Spring festival holidays. Twenty-nine perfluoroalkyl acids (PFAA) were quantified to investigate concentration, composition, and toddlers' exposure. The concentrations of ∑PFAA ranged from no detection (nd) to 43 ng/m2 (mean 8.9 ± 10 ng/m2). Perfluorobutanoic acid (PFBA) was detected in 78% samples and accounted for 55 ± 21% of ∑PFAA concentrations. 6:2 fluorotelomer sulfonic acid (6:2 FTSA) and hexafluoropropylene oxide dimer acid (HFPO-DA) were detected in more than 50% samples indicating the use of alternatives. Fluorotelomer carboxylic acid (FTCA) and fluorotelomer unsaturated acid (FTUCA) were found in the dust, implying the degradation of fluorotelomer alcohols (FTOH). The highest concentration of ∑PFAA (43 ng/m2) was found in outdoor dust from Xinzhou, Shanxi Province. Higher ∑PFAA concentrations were found in indoor dust than outdoor in 6 paired samples (3 from Feb. 14 and 3 from Feb. 21). In Tianjin and Handan, the concentrations of ∑PFAA from outdoor surfaces were higher in sampling campaign I (SC I, Feb. 21) than in sampling campaign II (SC II, Feb. 14), implying intensive outdoor release. The exposure of 2-year-old toddlers to PFAA via hand-to-mouth ingestion and dermal absorption was estimated; the mean values of intake were 2.1 and 1.5 pg/kg body weight, respectively, assuming an exposure time of 1 h.

Prevalence and Implications of Per- and Polyfluoroalkyl Substances (PFAS) in Settled Dust

PURPOSE OF REVIEW

Per- and polyfluoroalkyl substances (PFAS) are a family of more than 7,000 fluorinated compounds. The carbon-fluorine bond of PFAS provides desirable hydrophobic and oleophobic properties and stability that has led to widespread usage in consumer products and industrial applications. The strength of the carbon-fluorine bond also prevents appreciable degradation once released into the environment. Consequently, various household products can release volatile and nonvolatile PFAS into the indoor environment that often concentrate in dust. We discuss the diversity of PFAS in settled dust, emission sources of these chemicals, changes in PFAS profiles in dust over the past century, and the implications for human health.

RECENT FINDINGS

Sources of PFAS found in dust include building materials and furnishings and consumer products used in typical indoor spaces. Daycares and workplaces are emphasized as locations with widespread exposure due to the presence of treated carpeting and industrial-strength cleaners. Comparison and interpretation of findings across studies are complicated by the different ways in which PFAS are screened across studies. We further discuss recent developments in non-targeted software for the comprehensive annotation of PFAS in indoor dust and emphasize the need for comprehensive and harmonized analytical workflows. We highlight the detection and diversity of PFAS in settled dust collected from various indoor spaces, including locations with vulnerable subpopulations. There are opportunities for future research to leverage settled dust as a sentinel environmental matrix to evaluate the link between inhalation and ingestion routes of PFAS exposure to adverse health.

Polychlorinated biphenyls in indoor dust from urban dwellings of Lahore, Pakistan: Congener profile, toxicity equivalency, and human health implications

This study is the pioneer assessment of the PCBs in indoor dust particles (from air conditioners) of an urbanized megacity from South Asian. The ∑₃₅ PCB concentration ranged from 0.27 to 152.9 ng/g (mean: 24.84 ± 22.10 ng/g). The tri- and tetra-PCBs were dominant homologues, contributing 57.36% of the total PCB concentrations. The mean levels of Σ₈ -dioxin-like (DL), Σ₆ -indicator PCBs and WHO₂₀₀₅ -TEQ for DL-PCBs were 2.22 ± 2.55 ng/g, 9.49 ± 8.04 ng/g and 4.77 ± 4.89 pg/g, respectively. The multiple linear regression indicated a significant correlation of dusting frequency (p = 1.06 × 10-04) and age of the house (p = 1.02 × 10-06) with PCB concentrations in indoor environment. The spatial variation of PCB profile revealed relatively higher concentrations from sites near to illegal waste burning spots, electrical locomotive workshops, and grid stations. Human health risk assessment of PCBs for adults and toddlers through all three exposure routes (ie, inhalation, ingestion, and dermal contact) demonstrated that toddlers were vulnerable to high cancer risk (4.32 × 10^-04 ), while adults were susceptible from low to moderate levels of risk (3.16 × 10^-05 ). Therefore, comprehensive investigations for PCBs in the indoor settings, focusing particularly on the sensitive populations with relationship to the electronic devices, transformers, and illegal waste burning sites, are recommended.

Organochlorine pesticides (OCPs) in air-conditioner filter dust of indoor urban setting: Implication for health risk in a developing country

This preliminary investigation highlights the occurrence of organochlorine pesticides (OCPs) in the indoor environment of a megacity, Lahore, Pakistan using the dust ensnared by air-conditioner filters. The Σ₁₆ OCPs concentration ranged from 7.53 to 1272.87 ng/g with the highest percent contribution by ΣDDT (dichlorodiphenyltrichloroethane; 87.21%) and aldrin (6.58%). The spatial variation of OCPs profile revealed relatively higher concentration from homes near to agricultural and abandoned DDT manufacturing sites. Calculated isomer ratios revealed historic sources of hexachlorocyclohexanes (HCHs) and the fresh input of technical DDT and chlordane by the dwellers. The air conditioner dust was helpful to better understand the health risk in the indoor environment. So far a high lifetime cancer risk (10^-3 ) was predicted for toddlers via accidental ingestion, inhalation, and dermal exposure. Similarly, the non-carcinogenic risk-based hazard quotient was found to be high for toddlers (6.94) and within the permissible limit (<1) for adults.

Emerging investigator series: air conditioning filters as a sampler for semi-volatile organic compounds in indoor and near-building air

Organic compounds like flame retardants (FRs), polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) and polycyclic aromatic hydrocarbons (PAHs) are consistently found in both indoor and outdoor environments. There are many possible matrices for measurement of these compounds (e.g. indoor dust, air - passive and active air samples), but all methods have limitations, like the heterogeneous distribution of indoor dust, or noisy active air samplers. We used filters from building-wide heating, ventilation and air conditioning (HVAC) units to evaluate levels of PAHs, PCBs, OCPs and NFRs in indoor and outdoor environments, and to evaluate whether this method is feasible for screening semivolatile organic compounds (SVOCs) in indoor and near-building outdoor environments. Detectable levels of FRs, PCBs, OCPs and PAHs were found, demonstrating that HVAC filters do collect SVOCs, with generally higher levels of PAHs in the incoming air filters and higher levels of PCBs, OCPs and FRs in the outgoing air filters. Levels of FRs, PCBs and OCPs in outgoing air were comparable to those measured using conventional active air sampling in the same building. The advantages of using HVAC filters are (1) integrated and homogeneous samples, as the whole building is sampled over typically a long timescale (months), and (2) samples are easy and cheap to collect and do not require prior deployment of samplers. The key disadvantage is that HVAC filters are not designed for analytical chemistry and thus the filter materials can have variable or unknown gas sorption and particle capture, and can have strong matrix effects during analysis.

Per- and Polyfluoroalkyl Substances in Dust Collected from Residential Homes and Fire Stations in North America

Over the past few years, human exposure to per- and polyfluoroalkyl substances (PFAS) has garnered increased attention. Research has focused on PFAS exposure via drinking water and diet, and fewer studies have focused on exposure in the indoor environment. To support more research on the latter exposure pathway, we conducted a study to evaluate PFAS in indoor dust. Dust samples from 184 homes in North Carolina and 49 fire stations across the United States and Canada were collected and analyzed for a suite of PFAS using liquid and gas chromatography-mass spectrometry. Fluorotelomer alcohols (FTOHs) and di-polyfluoroalkyl phosphoric acid esters (diPAPs) were the most prevalent PFAS in both fire station and house dust samples, with medians of approximately 100 ng/g dust or greater. Notably, perfluorooctanesulfonic acid (PFOS), perfluorooctanoic acid (PFOA), perfluorohexane sulfonate, perfluorononanoic acid, and 6:2 diPAP were significantly higher in dust from fire stations than from homes, and 8:2 FTOH was significantly higher in homes than in fire stations. Additionally, when comparing our results to earlier published values, we see that perfluoroalkyl acid levels in residential dust appear to decrease over time, particularly for PFOA and PFOS. These results highlight a need to better understand what factors contribute to PFAS levels in dust and to understand how much dust contributes to overall human PFAS exposure.

Polyfluoroalkyl substances in Danjiangkou Reservoir, China: Occurrence, composition, and source appointment

Legacy polyfluoroalkyl substances (PFASs) have been widely detected in various environmental matrices, which has caused great public concern. This study investigated the concentration, composition, partitioning, source apportionment, estimated daily intake (EDI), and ecological risks of 18 PFASs in water and sediments from Danjiangkou Reservoir. The total PFASs concentrations were 0.46-97.94 ng/L in water and 0.07-1.62 μg/kg in sediments. The total PFASs concentrations in water followed the order of spring > summer > winter > autumn (p < 0.05), and the PFAS compositions in water also varied among four seasons. However, no seasonal differences in the concentrations and compositions of PFASs were observed in sediments. The calculated logK_oc values of perfluoroalkyl carboxylic acids (PFCAs) were dependent on carbon chain length, decreasing first from C6 to C8 and then increasing from C8 to C13 due to the combined effects of steric hindrance and hydrophobic interaction, while the logK_oc values of C14 and C16 PFCAs were the lowest because of their very limited use. Principal component analysis-multiple linear regression analysis (PCA-MLRA) showed that food packaging/metal plating were the main sources of PFASs in spring, autumn, and winter, accounting for 64.8-81.9% and 50.5-76.9% of the total PFASs in water and sediments, respectively. However, in summer, 68.6% of total PFASs in water originated from leather/fabrics/textiles, and 70.0% of total PFASs in sediments were derived from textile treatment agents. The total EDI values through drinking water and dermal contact were 0.85, 0.69, 0.51, and 0.47 ng/kg bw/day for children (2-6, 7-12, and 13-17 years old) and adults, respectively, which were lower than the European Food Safety Authority's tolerable daily intake. However, the detected PFASs could pose low to medium ecological risks to daphnids and fish in spring. The study was significant for the development of effective strategies for controlling PFASs pollution in the Danjiangkou Reservoir.

PFOS Modulates Interactive Epigenetic Regulation in First-Trimester Human Trophoblast Cell Line HTR-8/SVneo

Organic compounds have been linked to adverse pregnancy complications. Perfluorooctanesulfonic acid (PFOS), a man-made fluorosurfactant and global pollutant, has been shown to induce oxidative stress in various cell types. Oxidative stress plays a key role in leading several placental diseases including preeclampsia (PE), gestational diabetes, spontaneous abortion, preterm labor, and intrauterine growth restriction. Recently, epigenetic regulation such as histone modifications, DNA methylation, and microRNAs (miRNAs), are shown to be associated with oxidative stress as well as pregnancy complications such as PE. However, whether PFOS exerts its detrimental effects in the placenta through epigenetics remains to be unveiled. Therefore, we aimed to investigate the effect of PFOS-induced reactive oxygen species (ROS) generation in first trimester human trophoblast cell line (HTR-8/SV_neo) and whether epigenetic regulation is involved in this process. When treated with a range of PFOS doses at 24 and 48 h, even at 10 μM, it significantly increased the ROS production and decreased gene and protein expression, respectively, of the DNA methyltransferases DNMT1 (p < 0.001; p < 0.05), DNMT3A (p < 0.001; p < 0.05), and DNMT3B (p < 0.01; p < 0.01) and the sirtuins, for example, SIRT1 (p < 0.001; p < 0.001) and SIRT3 (p < 0.001; p < 0.05), while reducing global DNA methylation (p < 0.01) and increasing protein lysine acetylation (p < 0.001) as compared to vehicle controls. Interestingly, PFOS (10 μM) significantly increased miR29-b (p < 0.01), which has been previously reported to be associated with PE. The observed epigenetic effects were shown to be dependent on the expression of miR-29b, as knockdown of miR-29b significantly alters the gene and protein expression of DNMT1, DNMT3A, DNMT3B, SIRT1, and SIRT3 and ROS production as well as global DNA methylation and protein acetylation. This study provides for the first time a novel insight into PFOS-induced ROS generation via regulation of sets of the interactive epigenetic circuit in the placenta, which may lead to pregnancy complications.