Discovery of an ultra-short linear antibacterial tetrapeptide with anti-MRSA activity from a structure-activity relationship study

Efficacy of Short Novel Antimicrobial Peptides in a Mouse Model of Staphylococcus pseudintermedius Skin Infection

As the clinical application of antibiotics for bacterial skin infections in companion animals becomes increasingly prevalent, the issue of bacterial resistance has become more pronounced. Antimicrobial peptides, as a novel alternative to traditional antibiotics, have garnered widespread attention. In our study, synthetic peptides ADD-A and CBD3-ABU were tested against Staphylococcus pseudintermedius skin infections in KM mice. ADD-A was applied topically and through intraperitoneal injection, compared with control groups and treatments including CBD3-ABU, ampicillin sodium, and saline. Wound contraction, bacterial counts and histology were assessed on days 3 and 11 post-infection. ADD-A and ampicillin treatments significantly outperformed saline in wound healing (p < 0.0001 and p < 0.001, respectively). ADD-A also showed a markedly lower bacterial count than ampicillin (p < 0.0001). Histologically, ADD-A-applied wounds had better epidermal continuity and a thicker epidermis than normal, with restored follicles and sebaceous glands. ADD-A's effectiveness suggests it as a potential alternative to antibiotics for treating skin infections in animals.

Peptide Power: Mechanistic Insights into the Effect of Mitochondria-Targeted Tetrapeptides on Membrane Electrostatics from Molecular Simulations

Mitochondrial dysfunction is implicated in nine of the ten leading causes of death in the US, yet there are no FDA-approved therapeutics to treat it. Synthetic mitochondria-targeted peptides (MTPs), including the lead compound SS-31, offer promise, as they have been shown to restore healthy mitochondrial function and treat a variety of common diseases. At the cellular level, research has shown that MTPs accumulate strongly at the inner mitochondrial membrane (IMM), slow energy sinks (e.g., proton leaks), and improve ATP production. Modulation of electrostatic fields around the IMM has been implicated as a key aspect in the mechanism of action (MoA) of these peptides; however, molecular and mechanistic details have remained elusive. In this study, we employed all-atom molecular dynamics simulations (MD) to investigate the interactions of four MTPs with lipid bilayers and calculate their effect on structural and electrostatic properties. In agreement with previous experimental findings, we observed the modulation of the membrane surface and dipole potentials by MTPs. The simulations reveal that the MTPs achieve a reduction in the dipole potential by acting to disorder both lipid head groups and water layers proximal to the bilayer surface. We also find that MTPs decrease the bilayer thickness and increase the membrane's capacitance. These changes suggest that MTPs may enhance how much potential energy can be stored across the IMM at a given transmembrane potential difference. The MTPs also displace cations away from the bilayer surface, modulating the surface potential and offering an alternative mechanism for how these MTPs reduce mitochondrial energy sinks like proton leaks and mitigate Ca2+ accumulation stress. In conclusion, this study highlights the therapeutic potential of MTPs and underlines how interactions of MTPs with lipid bilayers serve as a fundamental component of their MoA.

Amphiphilic small molecule antimicrobials: From cationic antimicrobial peptides (CAMPs) to mechanism-related, structurally-diverse antimicrobials

Bacterial infections are characterized by their rapid and widespread proliferation, leading to significant morbidity. Despite the availability of a variety of antimicrobial drugs, the resistance exhibited by pathogenic microorganisms towards these drugs demonstrates a consistent upward trajectory year after year. This trend can be attributed to the abuse or misuse of antibiotics. Although antimicrobial peptides can avoid the emergence of drug resistance to a certain extent, their clinical application has been hindered by factors such as their high production cost, poor in vivo stability, and potential cytotoxicity. Consequently, there arises an urgent need for the development of novel antimicrobial drugs. Small-molecule amphiphatic antimicrobials have a good prospect for research and development. These peptides hold the potential to address several issues, including the high cost of antimicrobial peptide production, poor in vivo stability, and cytotoxicity. Moreover, they exhibit the capability to overcome bacterial resistance, thereby considerably satisfying market demands and clinical needs. This paper reviews recent research pertaining to small molecule host-defending amphiphatic antimicrobials with cationic amphiphilic structures. It focuses on the design concepts, inherent relationships, drug-like properties, antimicrobial activities, application prospects, and emerging screening methods for novel antimicrobial. This review assumes paramount importance in mitigating the current shortcomings of antimicrobial agents. It also provides potential new ideas and methodologies for the research and development of antimicrobial agents.

Multifunctional Properties of BMAP-18 and Its Aliphatic Analog against Drug-Resistant Bacteria

BMAP-18, derived from the N-terminal region of bovine myeloid antimicrobial peptide BMAP-27, demonstrates potent antimicrobial activity without cytotoxicity. This study aimed to compare the antibacterial, antibiofilm, and anti-inflammatory properties of BMAP-18, rich in aromatic phenylalanine residues, with its aliphatic analog, BMAP-18-FL. Both aromatic BMAP-18 and aliphatic BMAP-18-FL exhibited equally potent antimicrobial activities against Gram-positive and Gram-negative bacteria, particularly methicillin-resistant Staphylococcus aureus (MRSA) and multidrug-resistant Pseudomonas aeruginosa (MDRPA). Mechanistic investigations employing SYTOX green uptake, DNA binding, and FACScan analysis revealed that both peptides acted by inducing membrane permeabilization and subsequent intracellular targeting. Moreover, both BMAP-18 and BMAP-18-FL effectively prevented biofilm formation and eradicated existing biofilms of MRSA and MDRPA. Notably, BMAP-18-FL displayed a superior anti-inflammatory activity compared to BMAP-18, significantly reducing the expression levels of pro-inflammatory cytokines in lipopolysaccharide-stimulated macrophages. This study emphasizes the similarities and differences in the antimicrobial, antibiofilm, and anti-inflammatory properties between aromatic BMAP-18 and aliphatic BMAP-18-FL, providing valuable insights for the development of multifunctional antimicrobial peptides against drug-resistant bacteria.

Label-free measurement of antimicrobial peptide interactions with lipid vesicles and nanodiscs using microscale thermophoresis

One strategy to combat antimicrobial resistance is the discovery of new classes of antibiotics. Most antibiotics will at some point interact with the bacterial membrane to either interfere with its integrity or to cross it. Reliable and efficient tools for determining the dissociation constant for membrane binding (KD) and the partitioning coefficient between the aqueous- and membrane phases (KP) are therefore important tools for discovering and optimizing antimicrobial hits. Here we demonstrate that microscale thermophoresis (MST) can be used for label-free measurement of KD by utilising the intrinsic fluorescence of tryptophan and thereby removing the need for chromophore labelling. As proof of principle, we have used the method to measure the binding of a set of small cyclic AMPs to large unilamellar vesicles (LUVs) and two types of lipid nanodiscs assembled by styrene maleic acid (SMA) and quaternary ammonium SMA (SMA-QA). The measured KD values correlate well with the corresponding measurements using surface plasmon resonance (SPR), also broadly reflecting the tested AMPs' minimal inhibition concentration (MIC) towards S. aureus and E. coli. We conclude that MST is a promising method for fast and cost-efficient detection of peptide-lipid interactions or mapping of sample conditions in preparation for more advanced studies that rely on expensive sample preparation, labelling and/or instrument time.

Goldilocks Dilemma: LPS Works Both as the Initial Target and a Barrier for the Antimicrobial Action of Cationic AMPs on E. coli

Antimicrobial peptides (AMPs) are generally membrane-active compounds that physically disrupt bacterial membranes. Despite extensive research, the precise mode of action of AMPs is still a topic of great debate. This work demonstrates that the initial interaction between the Gram-negative E. coli and AMPs is driven by lipopolysaccharides (LPS) that act as kinetic barriers for the binding of AMPs to the bacterial membrane. A combination of SPR and NMR experiments provide evidence suggesting that cationic AMPs first bind to the negatively charged LPS before reaching a binding place in the lipid bilayer. In the event that the initial LPS-binding is too strong (corresponding to a low dissociation rate), the cationic AMPs cannot effectively get from the LPS to the membrane, and their antimicrobial potency will thus be diminished. On the other hand, the AMPs must also be able to effectively interact with the membrane to exert its activity. The ability of the studied cyclic hexapeptides to bind LPS and to translocate into a lipid membrane is related to the nature of the cationic charge (arginine vs. lysine) and to the distribution of hydrophobicity along the molecule (alternating vs. clumped tryptophan).

Molecular dynamics simulations to study the role of biphenylalanine in promoting the antibacterial activity of ultrashort peptides

The hydrophobic amino acid biphenylalanine (B) plays a key role in the antibacterial activity of ultrashort peptides. In this study, the interactions of tetrapeptide BRBR-NH₂ (BRBR) and pentapeptide BRBRB-NH₂ (BRBRB) with dioleoylphosphatidylcholine/dioleoylphosphatidylglycerol (DOPC/DOPG) mixed model membrane were studied by molecular dynamics simulation to assess the role of biphenylalanine in promoting the antibacterial activity of ultrashort peptides. At low peptide concentrations, both peptides presented amphiphilic conformations; residues B of the pentapeptide approached the membrane faster than those of the tetrapeptide and made more contacts with the membrane; BRBRB exhibited stronger membrane affinity than BRBR. However, due to the low peptide concentrations, the effects of these two peptides on the membrane were not significantly different. At high peptide concentrations, the strong affinity of BRBRB made it have more interaction with membrane than BRBR and most residues B of BRBRB inserted into the membrane; BRBRB was more prone to aggregation and caused the membrane more disordered and thinner than BRBR. Hydrophobic residues often act as anchors in the antibacterial activity of ultrashort antimicrobial peptides. Adding a hydrophobic residue B to the C-terminal of BRBR could improve the ability of the peptide to "grasp" the membrane. At high peptide concentrations, the addition of residue B might enhance the antibacterial activity of the peptide. Thus, our results will be helpful in designing efficient antibacterial drugs.

Hydrophobic-hydrophilic Alternation: An effective Pattern to de novo Designed Antimicrobial Peptides

The antimicrobial peptide (AMP) is a class of molecules that are active against a variety of microorganisms, from bacterial and cancer cells to fungi. Most AMPs are natural products, as part of an organism's own defense system against harmful microbes. However, the growing prevalence of drug resistance has forced researchers to design more promising engineered antimicrobial agents. Inspired by the amphiphilic detergents, the hydrophobic-hydrophilic alternation pattern was considered to be a simple but effective way to de novo design AMPs. In this model, hydrophobic amino acids (leucine, isoleucine etc.) and hydrophilic amino acids (arginine, lysine etc.) were arranged in an alternating way in the peptide sequence. The majority of this type of peptides have a clear hydrophilic-hydrophobic interface, which allows the molecules to have good solubility in both water and organic solvents. When they come into contact with hydrophobic membranes, many peptides undergo a conformational transformation, facilitating themself to insert into the cellular envelope. Moreover, positive-charged peptide amphiphiles tended to have an affinity with negatively-charged membrane interfaces and further led to envelope damage and cell death. Herein, several typical design patterns have been reviewed. Though varying in amino acid sequence, they all basically follow the rule of alternating arrangement of hydrophilic and hydrophobic residues. Based on that, researchers synthesized some lead compounds with favorable antimicrobial activities and preliminarily investigated their possible mode of action. Besides membrane disruption, these AMPs are proven to kill microbes in multiple mechanisms. These results deepened our understanding of AMPs' design and provided a theoretical basis for constructing peptide candidates with better biocompatibility and therapeutic potential.

Self-assembly of virulent amyloid-derived peptides into nanoantibacterials

Current strategies for the design of antibacterial peptides show limitations in the development of assembled antibacterial peptides due to the challenges in simultaneously balancing the antibacterial activity and assembling behavior. Herein, we report on one strategy for the design of antibacterial peptides derived from virulent amyloids and investigate their self-assembly into nanostructures with remarkable antibacterial activity. The peptides were either directly truncated from virulent amyloid peptide PSM α3 or mutated from the original sequence by replacing the lysine and phenylalanine residues with arginine or tryptophan, leading to three undecapeptides. Conformational and morphological results indicated the formation of nanotubes and twisted nanoribbons by the truncated peptide and the mutated peptide, respectively, predominately driven by anti-parallel β-sheets. Bacterial culturing experiments revealed that the two mutated peptides possessed remarkable antibacterial activity against both Gram-positive and Gram-negative bacteria by disrupting the bacterial membrane at a concentration above their critical aggregation concentrations, thus leading to two nanoantibacterials. Our findings demonstrate that biomimetic peptides originated from virulent amyloids exhibit great potential in the development of assembled antibacterial peptides, thus providing a new strategy for simultaneously addressing the antibacterial activity and pharmacokinetics of natural antibacterial peptides in the future.

An optimized analog of antimicrobial peptide Jelleine-1 shows enhanced antimicrobial activity against multidrug resistant P. aeruginosa and negligible toxicity in vitro and in vivo

Due to the threat of escalating multi-drug resistant gram-negative bacteria to human health and life, novel antimicrobial agents against gram-negative pathogens are urgently needed. As antimicrobial peptides are not prone to induce bacteria resistance, they are believed to be one kind of promising class of potential antimicrobial agent candidates to combat multi-drug resistant bacteria for long-term use. Jelleine-1, first isolated from the royal jelly of honeybees, is a typical amphiphilic antimicrobial peptide and shows broad antimicrobial spectrum and negligible toxicity. To promote its antimicrobial activity and extend its potential of clinical use against multi-drug resistant gram-negative bacteria, novel analogs of jelleine-1 were designed, synthesized and their antimicrobial functions and toxicity were examined in this study. Our results showed that fine tuning of the cationic charge, polarity, and basicity of the sequence through amino acids substitution at position 3, 5, 7 and maintaining position 1, 4, 6, 8 unchanged could improve the bioactivity of jelleine-1 significantly. Meanwhile, we also found that the substitution of phenylalanine by tryptophan also could improve the antimicrobial activity of jelleine-1. Among all the analogs, analog 15, which is enriched in arginine and leucine, showed the most potent antimicrobial activity against both gram-negative and gram-positive bacteria, especially to multi-drug resistant Pseudomonas aeruginosa in vivo and in vitro. In addition, analog 15 also showed potent inhibition of the formation of multi-drug resistant P. aeruginosa biofilm and negligible toxicity, which was certified by MTT, hemolysis, blood assay, and biochemical analysis.

Characteristics and therapeutic applications of antimicrobial peptides

The demand for novel antimicrobial compounds is rapidly growing due to the phenomenon of antibiotic resistance in bacteria. In response, numerous alternative approaches are being taken including use of polymers, metals, combinatorial approaches, and antimicrobial peptides (AMPs). AMPs are a naturally occurring part of the immune system of all higher organisms and display remarkable broad-spectrum activity and high selectivity for bacterial cells over host cells. However, despite good activity and safety profiles, AMPs have struggled to find success in the clinic. In this review, we outline the fundamental properties of AMPs that make them effective antimicrobials and extend this into three main approaches being used to help AMPs become viable clinical options. These three approaches are the incorporation of non-natural amino acids into the AMP sequence to impart better pharmacological properties, the incorporation of AMPs in hydrogels, and the chemical modification of surfaces with AMPs for device applications. These approaches are being developed to enhance the biocompatibility, stability, and/or bioavailability of AMPs as clinical options.

Influence of Different Aromatic Hydrophobic Residues on the Antimicrobial Activity and Membrane Selectivity of BRBR-NH2 Tetrapeptide

The ultrashort linear antimicrobial tetrapeptide BRBR-NH₂ with an unnatural residue biphenylalanine (B) has potent and rapid antimethicillin-resistant Staphylococcus aureus (MRSA) activity but lacks hemolytic activity. The anti-MRSA activity of BRBR-NH₂ is 8-fold more potent than that of WRWR-NH₂ and 16-fold more potent than that of FRFR-NH₂. However, how to influence their antimicrobial activities and mechanisms through the substitution of different aromatic hydrophobic residues is still unclear. In this work, to study the effects of varying hydrophobic interactions and membrane selectivities of BRBR-NH₂, we performed multiple long-time (1000 ns) molecular dynamics (MD) simulations to investigate the interactions of a red blood cell (RBC) membrane and a Gram-positive bacterial cell membrane with three different tetrapeptides (BRBR-NH₂, WRWR-NH₂, and FRFR-NH₂) under different ratios of peptides and lipids and also explored the changes in the membrane and structural characteristics of peptides. The binding energy results show that BRBR-NH₂ interacts weakly with the RBC membrane, while not all BRBR-NH₂ can be adsorbed to the RBC membrane surface. The MD simulation results produced significant local membrane thinning of multiBRBR-NH₂ peptides in the Gram-positive bacterial cell membrane. An in-depth analysis of structural features and peptide-membrane interactions suggests that the aggregation of BRBR-NH₂ on the membrane surface plays a crucial role in the destruction of the cell membrane. Taken together with the observed local membrane thinning, the in-depth analysis demonstrated that the interactions between the lipid bilayer and the BRBR-NH₂ aggregation surface result in a local disturbance of the membrane structure. It can be concluded that the high anti-MRSA activity of BRBR-NH₂ is attributed to the aggregation of BRBR-NH₂ on the membrane surface. On the other hand, WRWR-NH₂ and FRFR-NH₂ peptides tend to bind with the membrane surface in a monomeric form and cover the membrane surface in a carpet-like manner. Therefore, these results provide an advanced microscopic understanding of how hydrophobic interactions or hydrophobic residues affect the antimicrobial activity and mechanism of antimicrobial peptides (AMPs).

Alternating Cationic-Hydrophobic Peptide/Peptoid Hybrids: Influence of Hydrophobicity on Antibacterial Activity and Cell Selectivity

The influence of hydrophobicity on antibacterial activity versus the effect on the viability of mammalian cells for peptide/peptoid hybrids was examined for oligomers based on the cationic Lys-like peptoid residue combined with each of 28 hydrophobic amino acids in an alternating sequence. Their relative hydrophobicity was correlated to activity against both Gram-negative and Gram-positive species, human red blood cells, and HepG2 cells. This identified hydrophobic side chains that confer potent antibacterial activity (e. g., MICs of 2-8 μg/mL against E. coli) and low toxicity toward mammalian cells (<10 % hemolysis at 400 μg/mL and IC₅₀ >800 μg/mL for HepG2 viability). Most peptidomimetics retained activity against drug-resistant strains. These findings corroborate the hypothesis that for related peptidomimetics two hydrophobicity thresholds may be identified: i) it should exceed a certain level in order to confer antibacterial activity, and ii) there is an upper limit, beyond which cell selectivity is lost. It is envisioned that once identified for a given subclass of peptide-like antibacterials such thresholds can guide further optimisation.

Membrane-targeting antibiotics: recent developments outside the peptide space

The rise of antibiotic resistant bacteria requires unconventional strategies toward efficient chemotherapeutic agents, preferably with alternative mechanisms of action. The bacterial cell membrane has become an appealing target since its essential and highly conservative structure are key challenges to resistance mechanisms. Inspired by natural antimicrobial peptides, research on membrane-targeting antimicrobials has been growing out of the peptide space. The pursuit of more druggable molecules led to the discovery that the pharmacophore of antimicrobial peptides is smaller than anticipated. Several promising classes of membrane-targeting antimicrobials have been discovered, such as ceragenins, reutericyclines, carbohydrate amphiphiles - among others. This review will discuss the most recent findings on membrane-targeting antibiotics, focusing on small molecules outside the antimicrobial peptide molecular space.

Hydrophilic Linear Peptide with Histidine and Lysine Residues as a Key Factor Affecting Antifungal Activity

Increases in the numbers of immunocompromised patients and the emergence of drug-resistance fungal pathogens have led to the need for new, safe, efficacious antifungal agents. In this study, we designed a histidine-lysine-lysine (HKK) motif and synthesized six HKK peptides with repetitions of the motif. These peptides showed length-dependent antifungal activity against drug-susceptible and drug-resistant fungal pathogens via membranolytic or non-membranolytic action. None of the peptides were cytotoxic to rat erythrocytes or NIH3T3 mouse embryonic fibroblasts. Short-length peptides were directly translocated in fungal cytosol and reacted with mitochondria, resulting in apoptosis. Membrane-permeabilizing activity occurred in the presence of long peptides, and peptides were able to transfer to the cytosol and induce reactive oxygen species. Our results suggest that peptides composed only of cationic amino acids may be good candidates as antifungal agents.

Are the short cationic lipopeptides bacterial membrane disruptors? Structure-Activity Relationship and molecular dynamic evaluation

Short cationic lipopeptides are amphiphilic molecules that exhibit antimicrobial activity mainly against Gram-positives. These compounds bind to bacterial membranes and disrupt their integrity. Here we examine the structure-activity relation (SAR) of lysine-based lipopeptides, with a prospect to rationally design more active compounds. The presented study aims to explain how antimicrobial activity of lipopeptides is affected by the charge of lipopeptide headgroup and the length of lipopeptide acyl chain. The obtained SAR models suggest that the lipophilicity of short synthetic cationic lipopeptides is the major factor that determines their antimicrobial activities. In order to link the differences in antimicrobial activity to the mechanism of action of lipopeptides containing one and two hydrophobic chains, we additionally performed molecular dynamic (MD) simulations. By using combined coarse-grained and all-atom simulations we also show that these compounds neither affect the organization of the membrane lipids nor aggregate to form separate phases. These results, along with the onset of antimicrobial activity of lipopeptides well below the critical micelle concentration (CMC), indicate that lipopeptides do not act in a simple detergent-like manner.

Hybridization and antibiotic synergism as a tool for reducing the cytotoxicity of antimicrobial peptides

Introduction

As the development of new antimicrobial agents faces a historical decline, the issue of bacterial drug resistance has become a serious dilemma that threatens the human population worldwide. Antimicrobial peptides (AMPs) represent an attractive and a promising class of antimicrobial agents.

Aim

The hybridization of AMPs aimed at merging two individual active fragments of native peptides to generate a new AMP with altered physicochemical properties that translate into an enhanced safety profile.

Materials and methods

In this study, we have rationally designed a new hybrid peptide via combining two individual α-helical fragments of both BMAP-27 and OP-145. The resultant peptide, was evaluated for its antimicrobial and antibiofilm activity against a range of microbial strains. The resultant peptide was also evaluated for its toxicity against mammalian cells using hemolytic and anti proliferative assays.

Results

The antimicrobial activity of H4 revealed that the peptide is displaying a broad spectrum of activity against both Gram-positive and Gram-negative bacteria including standard and multidrug-resistant bacterial strains in the range of 2.5-25 μM. The new hybrid peptide displayed potent activity in eradicating biofilm-forming cells, and the reported minimum biofilm eradication concentrations were equal to the minimum inhibitory concentration values reported for planktonic cells. Additionally, H4 exhibited reduced toxicity profiles against eukaryotic cells. Combining H4 peptide with conventional antibiotics has led to a dramatic enhancement of the antimicrobial activity of both agents with synergistic or additive outcomes.

Conclusion

Overall, this study indicates the success of both the hybridization and synergism strategy in developing AMPs as potential antimicrobial therapeutics with reduced toxicity profiles that could be efficiently employed to eradicate resistant bacterial strains and enhance the selectivity and toxicity profiles of native AMPs.

Elucidating the bactericidal mechanism of action of the linear antimicrobial tetrapeptide BRBR-NH2

Linear antimicrobial peptides, with their rapid bactericidal mode of action, are well-suited for development as topical antibacterial drugs. We recently designed a synthetic linear 4-residue peptide, BRBR-NH₂, with potent bactericidal activity against Staphylococcus aureus (MIC 6.25 μM), the main causative pathogen of human skin infections with an unknown mechanism of action. Herein, we describe a series of experiments conducted to gain further insights into its mechanism of action involving electron microscopy, artificial membrane dye leakage, solution- and solid-state NMR spectroscopy followed by molecular dynamics simulations. Experimental results point towards a SMART (Soft Membranes Adapt and Respond, also Transiently) mechanism of action, suggesting that the peptide can be developed as a topical antibacterial agent for treating drug-resistant Staphylococcus aureus infections.

Antimicrobial and Antibiofilm Activity of UP-5, an Ultrashort Antimicrobial Peptide Designed Using Only Arginine and Biphenylalanine

The recent upsurge of multidrug resistant bacteria (MDRB) among global communities has become one of the most serious challenges facing health professionals and the human population worldwide. Cationic ultrashort antimicrobial peptides (USAMPs) are a promising group of molecules that meet the required criteria of novel antimicrobial drug development. UP-5, a novel penta-peptide, displayed significant antimicrobial activities against various standard and clinical isolates of MDRB. UP-5 displayed MICs values within the range of (10–15 μM) and (55–65 μM) against Gram-positive and Gram-negative bacteria, respectively. Furthermore, UP-5 displayed antibiofilm activity with minimum biofilm eradication concentration (MBEC) value as equal to twofold higher than MIC value. At the same inhibitory concentrations, UP-5 exhibited very low or negligible toxicity toward human erythrocytes and mammalian cells. Combining UP-5 with conventional antibiotics led to a synergistic or additive mode of action that resulted in the reduction of the MIC values for some of the antibiotics by 99.7% along a significant drop in MIC values of the peptide. The stability profile of UP-5 was evaluated in full mouse plasma and serum with results indicating a more stable pattern in plasma. The present study indicates that USAMPs are promising antimicrobial agents that can avoid the negative characteristics of conventional antimicrobial peptides. Additionally, USAMPs exhibit good to moderate activity against MDRB, negligible toxicity, and synergistic outcomes in combination with conventional antimicrobial agents.

Membrane Active Antimicrobial Peptides: Translating Mechanistic Insights to Design

Antimicrobial peptides (AMPs) are promising next generation antibiotics that hold great potential for combating bacterial resistance. AMPs can be both bacteriostatic and bactericidal, induce rapid killing and display a lower propensity to develop resistance than do conventional antibiotics. Despite significant progress in the past 30 years, no peptide antibiotic has reached the clinic yet. Poor understanding of the action mechanisms and lack of rational design principles have been the two major obstacles that have slowed progress. Technological developments are now enabling multidisciplinary approaches including molecular dynamics simulations combined with biophysics and microbiology toward providing valuable insights into the interactions of AMPs with membranes at atomic level. This has led to increasingly robust models of the mechanisms of action of AMPs and has begun to contribute meaningfully toward the discovery of new AMPs. This review discusses the detailed action mechanisms that have been put forward, with detailed atomistic insights into how the AMPs interact with bacterial membranes. The review further discusses how this knowledge is exploited toward developing design principles for novel AMPs. Finally, the current status, associated challenges, and future directions for the development of AMP therapeutics are discussed.

Discovery of a 9-mer Cationic Peptide (LTX-315) as a Potential First in Class Oncolytic Peptide

Oncolytic immunotherapies represent a new promising strategy in the treatment of cancer. In our efforts to develop oncolytic peptides, we identified a series of chemically modified 9-mer cationic peptides that were highly effective against both drug-resistant and drug-sensitive cancer cells and with lower toxicity toward normal cells. Among these peptides, LTX-315 displayed superior anticancer activity and was selected as a lead candidate. This peptide showed relative high plasma protein binding abilities and a human plasma half-life of 160 min, resulting in formation of nontoxic metabolites. In addition, the lead candidate demonstrated relatively low ability to inhibit CYP450 enzymes. Collectively these data indicated that this peptide has potential to be developed as a new anticancer agent for intratumoral administration and is currently being evaluated in a phase I/IIa study.