The topography of electrospun nanofibers and its impact on the growth and mobility of keratinocytes

Smart responsive staple for dynamic promotion of anastomotic stoma healing

The precise combination of conflicting biological properties through sophisticated structural and functional design to meet all the requirements of anastomotic healing is of great demand but remains challenging. Here, we develop a smart responsive anastomotic staple (Ti-OH-MC) by integrating porous titanium anastomotic staple with multifunctional polytannic acid/tannic acid coating. This design achieves dynamic sequential regulation of antibacterial, anti-inflammatory, and cell proliferation properties. During the inflammatory phase of the anastomotic stoma, our Ti-OH-MC can release tannic acid to provide antibacterial and anti-inflammatory properties, together with immune microenvironment regulation function. At the same time, as the healing progresses, the multifunctional coating gradually falls off to expose the porous structure of the titanium anastomotic staple, which promotes cell adhesion and proliferation during the later proliferative and remodeling phases. As a result, our Ti-OH-MC exceeds the properties of clinically used titanium anastomotic staple, and can effectively promote the healing. The staple's preparation strategy is simple and biocompatible, promising for industrialisation and clinical application. This work provides an effective anastomotic staple for anastomotic stoma healing and serve as a reference for the functional design and preparation of other types of titanium-based tissue repair materials.

Development of Poly(methyl methacrylate)/nano-hydroxyapatite (PMMA/nHA) Nanofibers for Tissue Engineering Regeneration Using an Electrospinning Technique

The study explores the in vitro biocompatibility and osteoconductivity of poly(methyl methacrylate)/nano-hydroxyapatite (PMMA/nHA) composite nanofibrous scaffolds for bone tissue engineering (BTE). Electrospun scaffolds, exhibiting both low and high fiber orientation, were investigated. The inclusion of hydroxyapatite nanoparticles enhances the osteoconductivity of the scaffolds while maintaining the ease of fabrication through electrospinning. SEM analysis confirms the high-quality morphology of the scaffolds, with successful incorporation of nHA evidenced by SEM-EDS and FTIR methods. DSC analysis indicates that nHA addition increases the PMMA glass transition temperature (Tg) and reduces stress relaxation during electrospinning. Furthermore, higher fiber orientation affects PMMA Tg and stress relaxation differently. Biological studies demonstrate the composite material's non-toxicity, excellent osteoblast viability, attachment, spreading, and proliferation. Overall, PMMA/nHA composite scaffolds show promise for BTE applications.

Development of a novel in vitro cell model for evaluation of nanofiber mats immunogenicity

Immunological safety of nanofibers remains poorly reported within the scientific literature and lacks specific in vitro testing models distinct from those used to test nanoparticles. To address the challenges of currently used conventional setups being described in the literature, we developed a novel in vitro model for nanofiber mats immunogenicity testing, which enables standardization of tested surface area, excludes nanofiber mat edges, and ensures stable contacts of cells with nanofibers during the experiment. The effect of nanofibers was assessed on peripheral blood mononuclear cells (PBMCs) by measuring their metabolic activity using MTS cell proliferation assay, where key performance parameters, i.e. cell number, phytohemagglutinin-L (PHA-L) concentration, incubation time and cell lysis were optimized. Repeatability of results obtained with non-activated and PHA-L-activated PBMCs in contact with differently thick polycaprolactone nanofiber mats was compared using both models. Our model provided more reproducible results with lower variability, exhibiting its higher reliability and accuracy than the conventional one. Furthermore, results showed the presence of thicker mats resulted in reduced metabolic activity and PBMC proliferation without any observed cytotoxicity, providing additional insights into their non-immunogenic characteristics. The developed model enables more accurate biological assessment that can support new guidelines for in vitro nanofiber testing and formulation.

Impact of local drug delivery and natural agents as new target strategies against periodontitis: new challenges for personalized therapeutic approach

Periodontitis is a persistent inflammation of the soft tissue around the teeth that affects 60% of the population in the globe. The self-maintenance of the inflammatory process can cause periodontal damage from the alveolar bone resorption to tooth loss in order to contrast the effects of periodontitis, the main therapy used is scaling and root planing (SRP). At the same time, studying the physiopathology of periodontitis has shown the possibility of using a local drug delivery system as an adjunctive therapy. Using local drug delivery devices in conjunction with SRP therapy for periodontitis is a potential tool since it increases drug efficacy and minimizes negative effects by managing drug release. This review emphasized how the use of local drug delivery agents and natural agents could be promising adjuvants for the treatment of periodontitis patients affected or not by cardiovascular disease, diabetes, and other system problems. Moreover, the review evidences the current issues and new ideas that can inspire potential later study for both basic research and clinical practice for a tailored approach.

Light-Driven Energy and Charge Transfer Processes between Additives within Electrospun Nanofibres

Electrospinning is a cost-effective and efficient method of producing polymeric nanofibre films. The resulting nanofibres can be produced in a variety of structures, including monoaxial, coaxial (core@shell), and Janus (side-by-side). The resulting fibres can also act as a matrix for various light-harvesting components such as dye molecules, nanoparticles, and quantum dots. The addition of these light-harvesting materials allows for various photo-driven processes to occur within the films. This review discusses the process of electrospinning as well as the effect of spinning parameters on resulting fibres. Building on this, we discuss energy transfer processes that have been explored in nanofibre films, such as Förster resonance energy transfer (FRET), metal-enhanced fluorescence (MEF), and upconversion. A charge transfer process, photoinduced electron transfer (PET), is also discussed. This review highlights various candidate molecules that have been used for photo-responsive processes in electrospun films.

Preparation and Investigation of Thermally Annealed Zein-Propolis Electrospun Nanofibers for Biomedical Applications

Zein, a corn-derived protein, has a variety of applications ranging from drug delivery to tissue engineering and wound healing. This work aims to develop a biocompatible scaffold for dermal applications based on thermally annealed electrospun propolis-loaded zein nanofibers. Pristine fibers' biocompatibility is determined in vitro. Next, propolis from Melipona quadrifasciata is added to the fibers at different concentrations (5% to 25%), and the scaffolds are studied. The physicochemical properties of zein/propolis precursor dispersions are evaluated and the results are correlated to the fibers' properties. Due to zein's and propolis' very favorable interactions, which are responsible for the increase in the dispersions surface tension, nanometric size ribbon-like fibers ranging from 420 to 575 nm are obtained. The fiber's hydrophobicity is not dependent on propolis concentration and increases with the annealing procedure. Propolis inhibitory concentration (IC₅₀ ) is determined as 61.78 µg mL^-1 . When loaded into fibers, propolis is gradually delivered to cells as Balb/3T3 fibroblasts and are able to adhere, grow, and interact with pristine and propolis-loaded fibers, and cytotoxicity is not observed. Therefore, the zein-propolis nanofibers are considered biocompatible and safe. The results are promising and provide prospects for the development of wound-healing nanofiber patches-one of propolis' main applications.

Fascia Layer-A Novel Target for the Application of Biomaterials in Skin Wound Healing

As the first barrier of the human body, the skin has been of great concern for its wound healing and regeneration. The healing of large, refractory wounds is difficult to be repaired by cell proliferation at the wound edges and usually requires manual intervention for treatment. Therefore, therapeutic tools such as stem cells, biomaterials, and cytokines have been applied to the treatment of skin wounds. Skin microenvironment modulation is a key technology to promote wound repair and skin regeneration. In recent years, a series of novel bioactive materials that modulate the microenvironment and cell behavior have been developed, showing the ability to efficiently facilitate wound repair and skin attachment regeneration. Meanwhile, our lab found that the fascial layer has an indispensable role in wound healing and repair, and this review summarizes the research progress of related bioactive materials and their role in wound healing.

Antifungal Activity of Camelus-Derived LFA-LFC Chimeric Peptide Gelatin Film and Effect on Oral Bacterial Biofilm

The objective of this study was to construct lactoferrin (LFA-LFC) chimeric peptide gelatin drug-loaded fiber film by tissue engineering strategy, and study its bacteriostatic effect on oral pathogens (especially Candida albicans) and its effect on biofilm. First of all, LFA-LFC chitosan nanoparticles were prepared firstly, and then fluconazole gelatin (LF/GH/F) film loaded with LFA-LFC was prepared by electrospinning. Scanning electron microscope (SEM), mechanical strength, drug release, cytotoxicity, and real-time PCR were used to test the properties of the synthesized materials. SEM showed that there was the reticular structure for fiber film before and after cross-linking. LF/GH/F film had no obvious cytotoxicity, with good biocompatibility and drug release; real-time PCR and antibacterial test showed that the LF/GH/F film had good antibacterial activity. LF/GH/F film has a good inhibitory effect on oral pathogens, and its mechanism is related to biofilm. The antibacterial experiments of nanofiber membrane in vitro and the effect of bacterial biofilm were carried out. The effect of LF/GH/F on oral microbial flora structure was studied by fluorescence quantitative pest techniques.

Understanding the cellular response of human tenon fibroblast on polycaprolactone-Aloe vera blend fiber

The signalling response is determined by the cell's reaction to different biochemical and biophysical inputs such as stiffness, topological, and structural alignment. The surface patterns at the nano-scale can be an influential factor in cell signalling behaviour. It is important to understand the cellular response to the biophysical cues for biomedical applications. Biomaterials have an important role in regenerative tissue engineering. In this study, we have fabricated electrospun polycaprolactone (PCL) and PCL-Aloe vera (PCL-AV) nanofibrous matrix and studied its effect on the human tenon fibroblast (HTF) cellular and morphological changes. The electrospun fibers were characterized using Scanning Electron Microscope (SEM), Fourier Transform Infrared spectroscopy (FTIR), Atomic Force Microscopy (AFM) and Brunaur, Emette and Teller (BET) analysis for their morphology, composition, topography, surface area and porosity. The results revealed fiber size, roughness and porosity has been altered by addition of AV. The HTF cell viability, proliferation and expression of focal adhesion proteins, such as FAK, Ezrin, Vasp and Cofilin on the PCL-AV fiber matrix were examined. The results showed a change in cellular morphology and a significant change in the cofilin phosphorylation on PCL-AV nanofiber. The influence of Aloe vera composition on the nano-dimension of the PCL has made a significant impact on the cellular morphology at both gene and protein levels. This observation suggests that AV composition in the nanofiber can significantly influence the HTF cellular adhesions.

Advanced bioactive nanomaterials for biomedical applications

Bioactive materials are a kind of materials with unique bioactivities, which can change the cellular behaviors and elicit biological responses from living tissues. Bioactive materials came into the spotlight in the late 1960s when the researchers found that the materials such as bioglass could react with surrounding bone tissue for bone regeneration. In the following decades, advances in nanotechnology brought the new development opportunities to bioactive nanomaterials. Bioactive nanomaterials are not a simple miniaturization of macroscopic materials. They exhibit unique bioactivities due to their nanoscale size effect, high specific surface area, and precise nanostructure, which can significantly influence the interactions with biological systems. Nowadays, bioactive nanomaterials have represented an important and exciting area of research. Current and future applications ensure that bioactive nanomaterials have a high academic and clinical importance. This review summaries the recent advances in the field of bioactive nanomaterials, and evaluate the influence factors of bioactivities. Then, a range of bioactive nanomaterials and their potential biomedical applications are discussed. Furthermore, the limitations, challenges, and future opportunities of bioactive nanomaterials are also discussed.

Electrospun Antibacterial Nanomaterials for Wound Dressings Applications

Chronic wounds are caused by bacterial infections and create major healthcare discomforts; to overcome this issue, wound dressings with antibacterial properties are to be utilized. The requirements of antibacterial wound dressings cannot be fulfilled by traditional wound dressing materials. Hence, to improve and accelerate the process of wound healing, an antibacterial wound dressing is to be designed. Electrospun nanofibers offer a promising solution to the management of wound healing, and numerous options are available to load antibacterial compounds onto the nanofiber webs. This review gives us an overview of some recent advances of electrospun antibacterial nanomaterials used in wound dressings. First, we provide a brief overview of the electrospinning process of nanofibers in wound healing and later discuss electrospun fibers that have incorporated various antimicrobial agents to be used in wound dressings. In addition, we highlight the latest research and patents related to electrospun nanofibers in wound dressing. This review also aims to concentrate on the importance of nanofibers for wound dressing applications and discuss functionalized antibacterial nanofibers in wound dressing.

Extrusion-based 3D (Bio)Printed Tissue Engineering Scaffolds: Process-Structure-Quality Relationships

Biological additive manufacturing (Bio-AM) has emerged as a promising approach for the fabrication of biological scaffolds with nano- to microscale resolutions and biomimetic architectures beneficial to tissue engineering applications. However, Bio-AM processes tend to introduce flaws in the construct during fabrication. These flaws can be traced to material nonhomogeneity, suboptimal processing parameters, changes in the (bio)printing environment (such as nozzle clogs), and poor construct design, all with significant contributions to the alteration of a scaffold's mechanical properties. In addition, the biological response of endogenous and exogenous cells interacting with the defective scaffolds could become unpredictable. In this review, we first described extrusion-based Bio-AM. We highlighted the salient architectural and mechanotransduction parameters affecting the response of cells interfaced with the scaffolds. The process phenomena leading to defect formation and some of the tools for defect detection are reviewed. The limitations of the existing developments and the directions that the field should grow in order to overcome said limitations are discussed.

Multifunctional Nanofibrous Dressing with Antimicrobial and Anti-Inflammatory Properties Prepared by Needle-Free Electrospinning

An active wound dressing should address the main goals in wound treatment, which are improved wound healing and reduced infection rates. We developed novel multifunctional nanofibrous wound dressings with three active ingredients: chloramphenicol (CAM), beta-glucan (βG) and chitosan (CHI), of which βG and CHI are active nanofiber-forming biopolymers isolated from the cell walls of Saccharomyces cerevisiae and from shrimp shells, respectively. To evaluate the effect of each active ingredient on the nanofibers' morphological features and bioactivity, nanofibers with both βG and CHI, only βG, only CHI and only copolymers, polyethylene oxide (PEO) and hydroxypropylmethylcellulose (HPMC) were fabricated. All four nanofiber formulations were also prepared with 1% CAM. The needle-free NanospiderTM technique allowed for the successful production of defect-free nanofibers containing all three active ingredients. The CAM-containing nanofibers had a burst CAM-release and a high absorption capacity. Nanofibers with all active ingredients (βG, CHI and CAM) showed a concentration-dependent anti-inflammatory activity, while maintaining the antimicrobial activity of CAM. The promising anti-inflammatory properties, together with the high absorption capacity and antimicrobial effect, make these multifunctional nanofibers promising as dressings in local treatment of infected and exuding wounds, such as burn wounds.

Hemolytic, Biocompatible, and Functional Effect of Cellularized Polycaprolactone-Hydrolyzed Collagen Electrospun Membranes for Possible Application as Vascular Implants

In search of bioactive vascular prostheses that exhibit greater biocompatibility through the combination of natural and synthetic polymers, tissue engineering from a biomimetic perspective has proposed the development of three-dimensional structures as therapeutic strategies in the field of cardiovascular medicine. Techniques such as electrospinning allow obtaining of scaffolds that emulate the microarchitecture of the extracellular matrix of native vessels; thus, this study aimed to evaluate the biological influence of microarchitecture on polycaprolactone (PCL) and hydrolyzed collagen (H-Col) electrospun scaffolds, which have a homogeneous (microscale) or heterogeneous (micro-nanoscale) fibrillar structure. The hemolytic, biocompatible, and functional effect of the scaffolds in interaction with an in vitro fibroblast model was determined, in view of its potential use for vascular implants. Scaffolds were characterized by scanning electron microscopy and atomic force microscopy, Fourier transform infrared spectroscopy, wettability, static permeability, tensile test, and degradation. In addition, direct and indirect 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays were used to identify the cell viability of fibroblasts, fluorescence assays were performed to establish morphological changes of the cell nuclei, and the hemolytic effect of the scaffolds was calculated. Results showed that ethanol-treated biocompositescaffolds exhibited mass losses lower than 6.65% and slow wettability and absorption, resulting from an increase in secondary structures that contribute to the crystalline phase of H-Col. The scaffolds demonstrated stable degradation in saline during the incubation period because of the availability of soluble structures in aqueous media, and the inclusion of H-Col increased the elastic properties of the scaffold. As regards hemocompatibility, the scaffolds had hemolysis levels lower than 1%; moreover, in terms of biocompatible characteristics, scaffolds exhibited good adhesion, proliferation, and cell viability and insignificant changes in the circularity of the cell nuclei. However, scaffolds with homogeneous fibers showed cell agglomerates after 48 h of interaction. By contrast, permeability decreased as the incubation period progressed, because of the cellularization of the three-dimensional structure. In conclusion, multiscale scaffolds could exhibit a suitable behavior as a bioactive small-diameter vascular implant.

Treatment challenges and delivery systems in immunomodulation and probiotic therapies for periodontitis

Introduction: Periodontitis is a widespread illness that arises due to disrupted interplay between the oral microbiota and the host immune response. In some cases, conventional therapies can provide temporary remission, although this is often followed by disease relapse. Recent studies of periodontitis pathology have promoted the development of new therapeutics to improve treatment options, together with local application using advanced drug delivery systems.Areas covered: This paper provides a critical review of the status of current treatment approaches to periodontitis, with a focus on promising immunomodulation and probiotic therapies. These are based on delivery of small molecules, peptides, proteins, DNA or RNA, and probiotics. The key findings on novel treatment strategies and formulation of advanced delivery systems, such as nanoparticles and nanofibers, are highlighted.Expert opinion: Multitarget therapy based on antimicrobial, immunomodulatory, and probiotic active ingredients incorporated into advanced delivery systems for application to the periodontal pocket can improve periodontitis treatment outcomes. Translation of such adjuvant therapy from laboratory to patient is expected in the future.

Role of Hydrogels in Bone Tissue Engineering: How Properties Shape Regeneration

Bone defect that resulted from trauma, tumors, and other reasons is believed as a common clinical problem, which exists mainly in post-traumatic healing. Additionally, autologous/allogeneic transplantation, bone tissue engineering attracts increasing attention due to the existing problem of the limited donor. The applications of biomaterials can be considered as a rising and promising strategy for bone regeneration. Especially, hydrogel is featured with hydrophilic characteristic, good biocompatibility, and porous structure, which shows unique properties for bone regeneration. The main properties of hydrogel such as surface property, adhesive property, mechanical property, porosity, and degradation property, generally present influences on the migration, proliferation, and differentiation of mesenchymal stem cells exclusively or in combination, which consequently affect the regeneration of bones. This review mainly focuses on the theme: "how properties of hydrogel shape bone regeneration." Moreover, the latest progress achieved in the above mentioned direction is further discussed. Despite the fascinating advances researchers have made, certain potential challenges continue to exist in the research field, which need to be addressed for accelerating the clinical translation of hydrogel in bone regeneration.

Bioinspired Fabrication of Calcium-Doped TiP Coating with Nanofibrous Microstructure to Accelerate Osseointegration

Bioinspired by the morphology of osteoclast-resorbed bone surfaces, we prepared a calcium-doped titanium phosphate (Ca-TiP) coating, which consists of a nanofibrous network, on titanium (Ti) substrate via a simple two-step hydrothermal method, trying to mimic natural bone compositionally and microstructurally. The in vitro studies show that the Ca-TiP coating with synergistic features of nanofibrous biomimetic topography and surface chemistry could elicit intensively osteogenic behavior and responses including enhanced cell adhesion, spreading, and proliferation as well as alkaline phosphatase (ALP) activity and up-regulated expression of bone-related genes, which inevitably benefit the formation of new bone and the quality of osseointegration. When the two control groups are compared in vivo, the significantly improved new bone formation in the early stage and the much stronger interfacial bonding with the surrounding bone for Ca-TiP coating suggest that Ca-TiP coating modified Ti implants hold great potential for orthopedic and dental applications.

Repair and regeneration of small intestine: A review of current engineering approaches

The small intestine (SI) is difficult to regenerate or reconstruct due to its complex structure and functions. Recent developments in stem cell research, advanced engineering technologies, and regenerative medicine strategies bring new hope of solving clinical problems of the SI. This review will first summarize the structure, function, development, cell types, and matrix components of the SI. Then, the major cell sources for SI regeneration are introduced, and state-of-the-art biofabrication technologies for generating engineered SI tissues or models are overviewed. Furthermore, in vitro models and in vivo transplantation, based on intestinal organoids and tissue engineering, are highlighted. Finally, current challenges and future perspectives are discussed to help direct future applications for SI repair and regeneration.

Reduction of thrombotic and inflammatory complications of polystyrene-block-polyisoprene-block-polystyrene (SIS) with one-step electrospinning

Polystyrene-block-polyisoprene-block-polystyrene (SIS) has been used as biomaterials due to its soft and stable properties under physiological conditions. However, the thrombotic and inflammatory complications caused by SIS restrain its application as blood-contacting implant. To overcome this problem, the hydrophilic core-shell structured SIS-based microfiber with antioxidant encapsulation is fabricated with one-step reactive electrospinning. We demonstrate that the phase separation of SIS and acylated Pluronic F127 (F127-DA) components and crosslinking during electrospinning renders the microfiber blood compatible and stable under physiological condition; the encapsulation of 2-O-d-glucopyranosyl-l-ascorbic acid (AA-2G) in microfiber and subsequent release of AA-2G detoxifies the excess reactive oxygen species (ROS). The microfibers are nontoxic to cells and promote the fast growth and proliferation of human umbilical vein endothelial cells (HUVECs) in the presence of ROS; the thrombotic and inflammatory complications are effectively reduced with implant evaluation in vivo. Therefore, our work paves a new way to improve the biocompatibility of SIS, making it a promising candidate for blood contact materials.

Lamellar liquid crystals maintain keratinocytes' membrane fluidity: An AFM qualitative and quantitative study

Despite extensive investigations of lamellar liquid crystals for dermal application, the effects of these systems at the cellular level are still not well elucidated. The key aim of this study was to determine the elasticity and morphological features of keratinocytes after exposure to a lamellar liquid crystal system (LLCS) using atomic force microscopy (AFM) as the method of choice. Prior to AFM assessment, a cell proliferation test and light plus fluorescence imaging were applied to determine the sub-toxic concentration of LLCS. According to the AFM results, slightly altered morphology was observed in the case of fixed keratinocytes, while an intact morphology was visualized on live cells. From the quantitative study, decreased Young's moduli were determined for fixed cells (i.e., 8.6 vs. 15.2 MPa and 1.3 vs. 2.9 MPa for ethanol or PFA-fixed LLCS-treated vs. control cells, respectively) and live cells (i.e., ranging from 0.6 to 2.8 for LLCS-treated vs. 1.1-4.5 MPa for untreated cells), clearly demonstrating increased cell elasticity. This is related to improved membrane fluidity as a consequence of interactions between the acyl chains of cell membrane phosphatidylcholine and those of LLCS. What seems to be of major importance is that the study confirms the potential clinical relevance of such systems in treatment of aged skin with characteristically more rigid epithelial cells.

Gelatin-polytrimethylene carbonate blend based electrospun tubular construct as a potential vascular biomaterial

The present work details the fabrication of electrospun tubular scaffolds based on the biocompatible and unexploited blend of gelatin and polytrimethylene carbonate (PTMC) as a media (middle layer of blood vessel) equivalent for blood vessel regeneration. An attempt to resemble the media stimulated the selection of gelatin as a matrix (substitution for collagen) with the inclusion of the biodegradable elastomer PTMC (substitution for elastin). -The work highlights the variation of electrospinning parameters and its assiduous selection based on fiber diameter distribution and pore size distribution to obtain smooth microfibers and micropores which is reported for the first time for this blend. Electrospun conduits of gelatin-PTMC blend had fibers sized 6-8 μm and pores sized ~100-150 μm. Young's modulus of 0.40 ± 0.045 MPa was observed, resembling the tunica media of the native artery (~0.5 MPa). An evaluation of the surface properties, topography, and mechanical properties validated its physical requirements for inclusion in a vascular graft. Preliminary biological tests confirmed its minimal in-vitro toxicity and in-vivo biocompatibility. MTT assay (indirect) elucidated cell viability above 70% with scaffold extract, considered to be non-toxic according to the EN ISO-10993-5/12 protocol. The in-vivo subcutaneous implantation in rat showed a marked reduction in macrophages within 15 days revealing its biocompatibility and its possibility for host integration. This comprehensive study presents for the first time the potential of microporous electrospun gelatin and PTMC blend based tubular construct as a potential biomaterial for vascular tissue engineering. The proposed media equivalent included in a bilayer or trilayer polymeric construct can be a promising off-shelf vascular graft.

Core-shell nanofibers as drug delivery systems

Core-shell nanofibers have grown in popularity over the last decade owing to their special features and their many applications in biomedicine. They can be produced by electrospinning of immiscible polymer blends or emulsions through a single nozzle or by electrospinning using a coaxial nozzle. Several of the electrospinning parameters allow great versatility for the compositions and diameters of core-shell nanofibers to be produced. Morphology of core-shell nanofibers can be investigated using transmission electron microscopy and, in some cases, scanning electron microscopy. Several studies have shown that core-shell nanofibers have some advantages over monolithic nanofibers, such as better drug, protein, gene or probiotic incorporation into the nanofibers, greater control over drug release, and maintenance of protein structure and activity during electrospinning. We herein review the production and characterization of core-shell nanofibers, the critical parameters that affect their development, and their advantages as delivery systems.

CNT Incorporated Polyacrilonitrile/Polypyrrole Nanofibers as Keratinocytes Scaffold

Polypyrrole (PPy) is an attractive scaffold material for tissue engineering with its non-toxic and electrically conductive properties. There has not been enough information about PPy usage in skin tissue engineering. The aim of this study is to investigate biocompatibility of polyacrilonitrile (PAN)/PPy nanofibrous scaffold for human keratinocytes. PAN/PPy bicomponent nanofibers were prepared by electrospinning, in various PPy concentrations and with carbon nanotube (CNT) incorporation. The average diameter of electrospun nanofibers decreased with increasing PPy concentration. Further, agglomerated CNTs caused beads and disordered parts on the surface of nanofibers. Biocompatibility of these PAN/PPy and PAN/PPy/CNT scaffolds were analyzed in vitro. Both scaffolds provided adhesion and proliferation of keratinocytes. Nanofiber diameter did not significantly influence the morphology of cells. However, with increasing number of cells, cells stayed among nanofibers and this affected their shape and size. In this study, we demonstrated that PAN/PPy and PAN/PPy/CNT scaffolds enabled the growth of keratinocytes, showing their biocompatibility.

A green approach to obtain stable and hydrophilic cellulose-based electrospun nanofibrous substrates for sustained release of therapeutic molecules

Stable and (bio)-compatible nanofibrous matrices showing effective incorporation and release of nonsteroidal anti-inflammatory drugs (NSAIDs) hold a huge potential in tissue regeneration and wound healing.

Design and characterization of monolaurin loaded electrospun shellac nanofibers with antimicrobial activity

The aim of this study was to elucidate the optimized fabrication factors influencing the formation and properties of shellac (SHL) nanofibers loaded with an antimicrobial monolaurin (ML). The main and interaction effects of formulation and process parameters including SHL content (35%–40% w/w), ML content (1%–3% w/w), applied voltage (9–27 kV) and flow rate (0.4–1.2 ml/h) on the characteristic of nanofibers were investigated through a total of 19 experiments based on a full factorial design with three replicated center points. As a result, the SHL content was the major parameter affecting fiber diameter. Another response result revealed that the SHL content would be also the most significant negative impact on amount of beads. An increase in the concentration of SHL leaded to a reduction in the amount of beads. From the results of characterization study, it was proved that ML might be entrapped between the chains of SHL during the electrospinning process exhibiting an excellent encapsulation. According to the response surface area, small (~488 nm) and beadless (~0.48) fibers were obtained with the SHL and ML contents of 37.5% and 1.1% w/w respectively, at the applied voltage of 18 kV and the flow rate of 0.8 ml/h. In addition, the results of the kill-kinetic studies showed that SHL nanofibers loaded with ML exhibited an excellent antibacterial activity against Staphylococcus aureus, while Escherichia coli was less affected due to the hydrophilic structure of the its outer membrane. ML also exerted an antifungal activity by reducing the number of Candida albicans colonies. Based on their structural and antimicrobial properties, SHL nanofibers containing ML could be potentially used as a medicated dressing for wound treatment.

Biocompatibility Assessment of Conducting PANI/Chitosan Nanofibers for Wound Healing Applications

As electroactive polymers have recently presented potential in applications in the tissue engineering and biomedical field, this study is aiming at the fabrication of composite nanofibrous membranes containing conducting polyaniline and at the evaluation of their biocompatibility. For that purpose, conducting polyaniline–chitosan (PANI/CS) defect free nanofibres of different ratios (1:3; 3:5 and 1:1) were produced with the electrospinning method. They were characterized as for their morphology, hydrophilicity and electrical conductivity. The membranes were then evaluated for their cellular biocompatibility in terms of cell attachment, morphology and cell proliferation. The effect of the PANI content on the membrane properties is discussed. Increase in PANI content resulted in membranes with higher hydrophobicity and higher electrical conductivity. It was found that none of the membranes showed any toxic effects on osteoblasts and fibroblasts, and that they all supported cell attachment and growth, even to a greater extent than tissue culture plastic. The membrane with the PANI/CS ratio 1:3 supports better cell attachment and proliferation for both cell lines due to a synergistic effect of hydrophilicity retention due to the high chitosan content and the conductivity that PANI introduced to the membrane.

Three-dimensional hierarchical cultivation of human skin cells on bio-adaptive hybrid fibers

The human skin comprises a complex multi-scale layered structure with hierarchical organization of different cells within the extracellular matrix (ECM). This supportive fiber-reinforced structure provides a dynamically changing microenvironment with specific topographical, mechanical and biochemical cell recognition sites to facilitate cell attachment and proliferation. Current advances in developing artificial matrices for cultivation of human cells concentrate on surface functionalizing of biocompatible materials with different biomolecules like growth factors to enhance cell attachment. However, an often neglected aspect for efficient modulation of cell-matrix interactions is posed by the mechanical characteristics of such artificial matrices. To address this issue, we fabricated biocompatible hybrid fibers simulating the complex biomechanical characteristics of native ECM in human skin. Subsequently, we analyzed interactions of such fibers with human skin cells focusing on the identification of key fiber characteristics for optimized cell-matrix interactions. We successfully identified the mediating effect of bio-adaptive elasto-plastic stiffness paired with hydrophilic surface properties as key factors for cell attachment and proliferation, thus elucidating the synergistic role of these parameters to induce cellular responses. Co-cultivation of fibroblasts and keratinocytes on such fiber mats representing the specific cells in dermis and epidermis resulted in a hierarchical organization of dermal and epidermal tissue layers. In addition, terminal differentiation of keratinocytes at the air interface was observed. These findings provide valuable new insights into cell behaviour in three-dimensional structures and cell-material interactions which can be used for rational development of bio-inspired functional materials for advanced biomedical applications.

Functional electrospun fibers for the treatment of human skin wounds

Wounds are trauma induced defects of the human skin involving a multitude of endogenous biochemical events and cellular reactions of the immune system. The healing process is extremely complex and affected by the patient's physiological conditions, potential implications like infectious pathogens and inflammation as well as external factors. Due to increasing incidence of chronic wounds and proceeding resistance of infection pathogens, there is a strong need for effective therapeutic wound care. In this context, electrospun fibers with diameters in the nano- to micrometer range gain increasing interest. While resembling the structure of the native human extracellular matrix, such fiber mats provide physical and mechanical protection (including protection against bacterial invasion). At the same time, the fibers allow for gas exchange and prevent occlusion of the wound bed, thus facilitating wound healing. In addition, drugs can be incorporated within such fiber mats and their release can be adjusted by the material and dimensions of the individual fibers. The review gives a comprehensive overview about the current state of electrospun fibers for therapeutic application on skin wounds. Different materials as well as fabrication techniques are introduced including approaches for incorporation of drugs into or drug attachment onto the fiber surface. Against the background of wound pathophysiology and established therapy approaches, the therapeutic potential of electrospun fiber systems is discussed. A specific focus is set on interactions of fibers with skin cells/tissues as well as wound pathogens and strategies to modify and control them as key aspects for developing effective wound therapeutics. Further, advantages and limitations of controlled drug delivery from fiber mats to skin wounds are discussed and a future perspective is provided.

Recent advances in electrospun nanofibers for wound healing

Electrospun nanofibers represent a novel class of materials that show great potential in many biomedical applications including biosensing, regenerative medicine, tissue engineering, drug delivery and wound healing. In this work, we review recent advances in electrospun nanofibers for wound healing. This article begins with a brief introduction on the wound, and then discusses the unique features of electrospun nanofibers critical for wound healing. It further highlights recent studies that have used electrospun nanofibers for wound healing applications and devices, including sutures, multifunctional dressings, dermal substitutes, engineered epidermis and full-thickness skin regeneration. Finally, we finish with conclusions and future perspective in this field.

The Horizon of Materiobiology: A Perspective on Material-Guided Cell Behaviors and Tissue Engineering

Although the biological functions of cell and tissue can be regulated by biochemical factors (e.g., growth factors, hormones), the biophysical effects of materials on the regulation of biological activity are receiving more attention. In this Review, we systematically summarize the recent progress on how biomaterials with controllable properties (e.g., compositional/degradable dynamics, mechanical properties, 2D topography, and 3D geometry) can regulate cell behaviors (e.g., cell adhesion, spreading, proliferation, cell alignment, and the differentiation or self-maintenance of stem cells) and tissue/organ functions. How the biophysical features of materials influence tissue/organ regeneration have been elucidated. Current challenges and a perspective on the development of novel materials that can modulate specific biological functions are discussed. The interdependent relationship between biomaterials and biology leads us to propose the concept of "materiobiology", which is a scientific discipline that studies the biological effects of the properties of biomaterials on biological functions at cell, tissue, organ, and the whole organism levels. This Review highlights that it is more important to develop ECM-mimicking biomaterials having a self-regenerative capacity to stimulate tissue regeneration, instead of attempting to recreate the complexity of living tissues or tissue constructs ex vivo. The principles of materiobiology may benefit the development of novel biomaterials providing combinative bioactive cues to activate the migration of stem cells from endogenous reservoirs (i.e., cell niches), stimulate robust and scalable self-healing mechanisms, and unlock the body's innate powers of regeneration.

Comparison of cell behavior on pva/pva-gelatin electrospun nanofibers with random and aligned configuration

Electrospinning technique is able to create nanofibers with specific orientation. Poly(vinyl alcohol) (PVA) have good mechanical stability but poor cell adhesion property due to the low affinity of protein. In this paper, extracellular matrix, gelatin is incorporated into PVA solution to form electrospun PVA-gelatin nanofibers membrane. Both randomly oriented and aligned nanofibers are used to investigate the topography-induced behavior of fibroblasts. Surface morphology of the fibers is studied by optical microscopy and scanning electron microscopy (SEM) coupled with image analysis. Functional group composition in PVA or PVA-gelatin is investigated by Fourier Transform Infrared (FTIR). The morphological changes, surface coverage, viability and proliferation of fibroblasts influenced by PVA and PVA-gelatin nanofibers with randomly orientated or aligned configuration are systematically compared. Fibroblasts growing on PVA-gelatin fibers show significantly larger projected areas as compared with those cultivated on PVA fibers which p-value is smaller than 0.005. Cells on PVA-gelatin aligned fibers stretch out extensively and their intracellular stress fiber pull nucleus to deform. Results suggest that instead of the anisotropic topology within the scaffold trigger the preferential orientation of cells, the adhesion of cell membrane to gelatin have substantial influence on cellular behavior.

Development of Suberin Fatty Acids and Chloramphenicol-Loaded Antimicrobial Electrospun Nanofibrous Mats Intended for Wound Therapy

Suberin fatty acids (SFAs) isolated from outer birch bark were investigated as an antimicrobial agent and biomaterial in nanofibrous mats intended for wound treatment. Electrospinning (ES) was used in preparing the composite nonwoven nanomats containing chloramphenicol (CAM; as a primary antimicrobial drug), SFAs, and polyvinylpyrrolidone (as a carrier polymer for ES). The X-ray powder diffraction, differential scanning calorimetry, scanning electron microscopy, atomic force microscopy, and texture analysis were used for the physicochemical and mechanical characterization of the nanomats. ES produced nanofibrous mats with uniform structure and with an average fiber diameter ranging from 370 to 425 nm. Microcrystalline SFAs and crystalline CAM were found to undergo a solid-state transformation during ES processing. The ES process caused also the loss of CAM in the final nanofibers. In the texture analysis, the SFAs containing nanofibers exhibited significantly higher maximum detachment force to an isolated pig skin (p < 0.05) than that obtained with the reference nanofibers. CAM exists in an amorphous form in the nanofibers which needs to be taken into account in controlling the physical storage stability. In conclusion, homogeneous composite nanofibrous mats for wound healing can be electrospun from the ternary mixture(s) of CAM, SFAs, and polyvinylpyrrolidone.

Two-dimensional electrospun nanofibrous membranes for promoting random skin flap survival

Electrospun fibrous membranes made of natural materials are more advantageous for random skin flap survival, and can be used as carrier implantation materials for improving skin flap survival rate.

Long-Term Sustained Ciprofloxacin Release from PMMA and Hydrophilic Polymer Blended Nanofibers

Nanofibers represent an attractive novel drug delivery system for prolonged and controlled release. However, sustained release of hydrophilic drugs, like ciprofloxacin hydrochloride (CIP), from polymeric nanofibers is not an easy task. The present study investigates the effect of different hydrophobic polymers (PCL and PMMA) alone in monolithic nanofibers or with hydrophilic polymers (PVA, PEO, and chitosan) in blended nanofibers aiming to achieve sustained CIP release. CIP release from PCL nanofibers was 46% and from PMMA just 1.5% over 40 day period. Thus, PMMA holds great promise for modification of CIP release from blended nanofibers. PMMA blends with 10% PEO, PVA, or chitosan were used to electrospin nanofibers from solution in the mixture of acetic and formic acid. These nanofibers exhibited different drug-release profiles: PEO containing nanofiber mats demonstrated high burst effect, chitosan containing mats revealed very slow gradual release, and PVA containing mats yielded smaller burst effect with favorable sustained release. We have also shown that gradual sustain release of antibiotic like CIP can be additionally tuned over 18 days with various blend ratios of PMMA with PVA or chitosan reaching almost 100%. A mathematical model in agreement with the experimental observation revealed that the sustained CIP release from the blended nanofibers corresponded to the two-stage desorption process.

In vitro dissolution-permeation evaluation of an electrospun cyclodextrin-based formulation of aripiprazole using μFlux™

Since it is a well-known fact that among the newly discovered active pharmaceutical ingredients the number of poorly water soluble candidates is continually increasing, dissolution enhancement of poorly water soluble drugs has become one of the central challenges of pharmaceutical studies. So far the preclinical studies have been mainly focused on formulation methods to enhance the dissolution of active compounds, in many cases disregarding the fact that the formulation matrix not only affects dissolution but also has an effect on the transport through biological membranes, changing permeation of the drug molecules. The aim of this study was to test an electrospun cyclodextrin-based formulation of aripiprazole with the novel μFlux apparatus, which monitors permeation together with dissolution, and by this means better in vitro-in vivo correlation is achieved. It was evinced that a cyclodextrin-based electrospun formulation of aripiprazole has the potential to ensure fast drug delivery through the oral mucosa owing to the ultrafast dissolution of the drug from the formulation and the enhanced flux across membranes as shown by the result of the novel in vitro dissolution and permeation test.

Electrospun polycaprolactone nanofibers as a potential oromucosal delivery system for poorly water-soluble drugs

The number of poorly water-soluble drug candidates is rapidly increasing; this represents a major challenge for the pharmaceutical industry. As a consequence, novel formulation approaches are required. Furthermore, if such a drug candidate is intended for the therapy of a specific group of the population, such as geriatric or pediatric, the formulation challenge is even greater, with the need to produce a dosage form that is acceptable for specific patients. Therefore, the goal of our study was to explore electrospun polycaprolactone (PCL) nanofibers as a novel nanodelivery system adopted for the oromucosal administration of poorly water-soluble drugs. The nanofibers were evaluated in comparison with polymer films loaded with ibuprofen or carvedilol as the model drugs. Scanning electron microscopy revealed that the amount of incorporated drug affects the diameter and the morphology of the nanofibers. The average fiber diameter increased with a higher drug loading, whereas the morphology of the nanofibers was noticeably changed in the case of nanofibers with 50% and 60% ibuprofen. The incorporation of drugs into the electrospun PCL nanofibers was observed to reduce their crystallinity. Based on the morphology of the nanofibers and the films, and the differential scanning calorimetry results obtained in this study, it can be assumed that the drugs incorporated into the nanofibers were partially molecularly dispersed in the PCL matrix and partially in the form of dispersed nanocrystals. The incorporation of both model drugs into the PCL nanofibers significantly improved their dissolution rates. The PCL nanofibers released almost 100% of the incorporated ibuprofen in 4h, whereas only up to 77% of the incorporated carvedilol was released during the same time period, indicating the influence of the drug's properties, such as molecular weight and solubility, on its release from the PCL matrix. The obtained results clearly demonstrated the advantages of the new nanodelivery system compared to the drug-loaded polymer films that were used as the reference formulation. As a result, electrospinning was shown to be a very promising nanotechnology-based approach to the formulation of poorly water-soluble drugs in order to enhance their dissolution. In addition, the great potential of the produced drug-loaded PCL nanofiber mats for subsequent formulation as oromucosal drug delivery systems for children and the elderly was confirmed.

Nanoscale TiO2 nanotubes govern the biological behavior of human glioma and osteosarcoma cells

Cells respond to their surroundings through an interactive adhesion process that has direct effects on cell proliferation and migration. This research was designed to investigate the effects of TiO₂ nanotubes with different topographies and structures on the biological behavior of cultured cells. The results demonstrated that the nanotube diameter, rather than the crystalline structure of the coatings, was a major factor for the biological behavior of the cultured cells. The optimal diameter of the nanotubes was 20 nm for cell adhesion, migration, and proliferation in both glioma and osteosarcoma cells. The expression levels of vitronectin and phosphor-focal adhesion kinase were affected by the nanotube diameter; therefore, it is proposed that the responses of vitronectin and phosphor-focal adhesion kinase to the nanotube could modulate cell fate. In addition, the geometry and size of the nanotube coating could regulate the degree of expression of acetylated α-tubulin, thus indirectly modulating cell migration behavior. Moreover, the expression levels of apoptosis-associated proteins were influenced by the topography. In conclusion, a nanotube diameter of 20 nm was the critical threshold that upregulated the expression level of Bcl-2 and obviously decreased the expression levels of Bax and caspase-3. This information will be useful for future biomedical and clinical applications.