Solid dispersions based on inulin for the stabilisation and formulation of Δ9-tetrahydrocannabinol

Spray freeze dried cannabidiol with dipalmitoylphosphatidylcholine (DPPC) for inhalation and solubility enhancement

Pulmonary delivery is an efficient route of administration to deliver cannabidiol (CBD) due to the high bioavailability and fast onset of action. The major formulation challenge is the poor aqueous solubility of CBD. This study aimed to produce inhalable CBD powders with enhanced solubility and characterise their solid-state properties. CBD was spray freeze dried with mannitol or trehalose dihydrate with and without dipalmitoylphosphatidylcholine (DPPC). All four powders had acceptable yields at > 70 % with porous and spherical particles. The two crystalline mannitol powders contained less residual solvent than both amorphous trehalose ones. The addition of DPPC did not affect the crystallinity and residual solvent level of the powders. Instead, DPPC made the particles more porous, decreased the particle size from 19-23 µm to 11-13 µm, and increased CBD solubility from 0.36 µg/mL to over 2 µg/mL. The two DPPC powders were dispersed from a low resistance RS01 inhaler, showing acceptable aerosol performance with emitted fractions at 91-93 % and fine particle fractions < 5 µm at 34-43 %. These formulations can be used as a platform to deliver CBD and other cannabinoids by inhalation.

How Biodegradable Polymers Can be Effective Drug Delivery Systems for Cannabinoids? Prospectives and Challenges

Cannabinoids are compounds found in and derived from the Cannabis plants that have become increasingly recognised as significant modulating factors of physiological mechanisms and inflammatory reactions of the organism, thus inevitably affecting maintenance of homeostasis. Medical Cannabis popularity has surged since its legal regulation growing around the world. Numerous promising discoveries bring more data on cannabinoids' pharmacological characteristics and therapeutic applications. Given the current surge in interest in the medical use of cannabinoids, there is an urgent need for an effective method of their administration. Surpassing low bioavailability, low water solubility, and instability became an important milestone in the advancement of cannabinoids in pharmaceutical applications. The numerous uses of cannabinoids in clinical practice remain restricted by limited administration alternatives, but there is hope when biodegradable polymers are taken into account. The primary objective of this review is to highlight the wide range of indications for which cannabinoids may be used, as well as the polymeric carriers that enhance their effectiveness. The current review described a wide range of therapeutic applications of cannabinoids, including pain management, neurological and sleep disorders, anxiety, and cancer treatment. The use of these compounds was further examined in the area of dermatology and cosmetology. Finally, with the use of biodegradable polymer-based drug delivery systems (DDSs), it was demonstrated that cannabinoids can be delivered specifically to the intended site while also improving the drug's physicochemical properties, emphasizing their utility. Nevertheless, additional clinical trials on novel cannabinoids' formulations are required, as their full spectrum therapeutical potential is yet to be unravelled.

Inulin: Unveiling its potential as a multifaceted biopolymer in prebiotics, drug delivery, and therapeutics

In recent years, inulin has gained much attention as a promising multifunctional natural biopolymer with numerous applications in drug delivery, prebiotics, and therapeutics. It reveals a multifaceted biopolymer with transformative implications by elucidating the intricate interplay between inulin and the host, microbiome, and therapeutic agents. Their flexible structure, exceptional targetability, biocompatibility, inherent ability to control release behavior, tunable degradation kinetics, and protective ability make them outstanding carriers in healthcare and biomedicine. USFDA has approved Inulin as a nutritional dietary supplement for infants. The possible applications of inulin in biomedicine research inspired by nature are presented. The therapeutic potential of inulin goes beyond its role in prebiotics and drug delivery. Recently, significant research efforts have been made towards inulin's anti-inflammatory, antioxidant, and immunomodulatory properties for their potential applications in treating various chronic diseases. Moreover, its ability to reduce inflammation and modulate immune responses opens new avenues for treating conditions such as autoimmune disorders and gastrointestinal ailments. This review will attempt to illustrate the inulin's numerous and interconnected roles, shedding light on its critical contributions to the advancement of healthcare and biomedicine and its recent advancement in therapeutics, and conclude by taking valuable insights into the prospects and opportunities of inulin.

Nanoformulations as a strategy to overcome the delivery limitations of cannabinoids

Medical cannabis has received significant interest in recent years due to its promising benefits in the management of pain, anxiety, depression and neurological and movement disorders. Specifically, the major phytocannabinoids derived from the cannabis plant such as (-) trans-Δ⁹ -tetrahydrocannabinol (THC) and cannabidiol (CBD), have been shown to be responsible for the pharmacological and therapeutic properties. Recently, these phytocannabinoids have also attracted special attention in cancer treatment due to their well-known palliative benefits in chemotherapy-induced nausea, vomiting, pain and loss of appetite along with their anticancer activities. Despite the enormous pharmacological benefits, the low aqueous solubility, high instability (susceptibility to extensive first pass metabolism) and poor systemic bioavailability restrict their utilization at clinical perspective. Therefore, drug delivery strategies based on nanotechnology are emerging to improve pharmacokinetic profile and bioavailability of cannabinoids as well as enhance their targeted delivery. Here, we critically review the nano-formulation systems engineered for overcoming the delivery limitations of native phytocannabinoids including polymeric and lipid-based nanoparticles (lipid nano capsules (LNCs), nanostructured lipid carriers (NLCs), nanoemulsions (NE) and self-emulsifying drug delivery systems (SEDDS)), ethosomes and cyclodextrins as well as their therapeutic applications.

Inulin and Its Application in Drug Delivery

Inulin’s unique and flexible structure, stabilization/protective effects, and organ targeting ability make it an excellent drug delivery carrier compared to other biodegradable polysaccharides. The three hydroxyl groups attached to each fructose unit serve as an anchor for chemical modification. This, in turn, helps in increasing bioavailability, improving cellular uptake, and achieving targeted, sustained, and controlled release of drugs and biomolecules. This review focuses on the various types of inulin drug delivery systems such as hydrogel, conjugates, nanoparticles, microparticles, micelles, liposomes, complexes, prodrugs, and solid dispersion. The preparation and applications of the different inulin drug delivery systems are further discussed. This work highlights the fact that modification of inulin allows the use of this polymer as multifunctional scaffolds for different drug delivery systems.

Inulin as a Delivery Vehicle for Targeting Colon-Specific Cancer

Natural polysaccharides, as well as biopolymers, are now days widely developed for targeting colon cancer using various drug delivery systems. Currently, healing conformations are being explored that can efficiently play a multipurpose role. Owing to the capability of extravagance colonic diseases with the least adverse effects, biopolymers for site specific colon delivery have developed an increased curiosity over the past decades. Inulin (INU) was explored for its probable application as an entrapment material concerning its degradation by enzymes in the colonic microflora and its drug release behavior in a sustained and controlled manner. INU is a polysaccharide and it consists of 2 to 1 linkage having an extensive array of beneficial uses such as a carrier for delivery of therapeutic agents as an indicative/investigative utensil or as a dietary fiber with added well-being aids. In the main, limited research, as well as information, is available on the delivery of therapeutic agents using inulin specifically for colon cancer because of its capability to subsist in the stomach's acidic medium. This exceptional steadiness and robustness properties are exploited in numerous patterns to target drugs securely for the management of colonic cancer, where they effectively act and kills colonic tumor cells easily. In this review article, recent efforts and inulin-based nano-technological approaches for colon cancer targeting are presented and discussed.

The physiological functions and pharmaceutical applications of inulin: A review

Inulin (IN), a fructan-type plant polysaccharide, is widely found in nature. The major plant sources of IN include chicory, Jerusalem artichoke, dahlia etc. Studies have found that IN possessed a wide array of biological activities, e.g. as a prebiotic to improve the intestinal microbe environment, regulating blood sugar, regulating blood lipids, antioxidant, anticancer, immune regulation and so on. Currently, IN is widely used in the food and pharmaceutical industries. IN can be used as thickener, fat replacer, sweetener and water retaining agent in the food industry. IN also can be applied in the pharmaceutics as stabilizer, drug carrier, and auxiliary therapeutic agent for certain diseases such as constipation and diabetes. This paper reviews the physiological functions of IN and its applications in the field of pharmaceutics, analyzes its present research status and future research direction. This review will serve as a one-in-all resource for the researchers who are interested to work on IN.

Comparison between Colistin Sulfate Dry Powder and Solution for Pulmonary Delivery

To assess the difference in the fate of the antibiotic colistin (COLI) after its pulmonary delivery as a powder or a solution, we developed a COLI powder and evaluated the COLI pharmacokinetic properties in rats after pulmonary administration of the powder or the solution. The amorphous COLI powder prepared by spray drying was characterized by a mass median aerodynamic diameter and fine particle fraction of 2.68 ± 0.07 µm and 59.5 ± 5.4%, respectively, when emitted from a Handihaler^®. After intratracheal administration, the average pulmonary epithelial lining fluid (ELF): plasma area under the concentration versus time curves (AUC) ratios were 570 and 95 for the COLI solution and powder, respectively. However, the same COLI plasma concentration profiles were obtained with the two formulations. According to our pharmacokinetic model, this difference in ELF COLI concentration could be due to faster systemic absorption of COLI after the powder inhalation than for the solution. In addition, the COLI apparent permeability (P_app) across a Calu-3 epithelium model increased 10-fold when its concentration changed from 100 to 4000 mg/L. Based on this last result, we propose that the difference observed in vivo between the COLI solution and powder could be due to a high local ELF COLI concentration being obtained at the site where the dry particles impact the lung. This high local COLI concentration can lead to a local increase in COLI P_app, which is associated with a high concentration gradient and could produce a high local transfer of COLI across the epithelium and a consequent increase in the overall absorption rate of COLI.

CBD loaded microparticles as a potential formulation to improve paclitaxel and doxorubicin-based chemotherapy in breast cancer

Cannabidiol (CBD) has emerged as a potential agent for breast cancer management. In this work, the potential use of cannabidiol in solution (CBD_sol) and encapsulated in polymeric microparticles when combined with paclitaxel (PTX) and doxorubicin (DOX) in breast cancer treatment has been evaluated for the first time using MCF-7 and MDA-MB-231 cells. CBD_sol, previously administered at suboptimal concentrations (cell death < 10%), enhanced the PTX and DOX effect in both breast cancer cells. The co-administration of CBD_sol and PTX or DOX showed a synergistic effect. PLGA-502 was selected as the most suitable polymer to develop CBD-loaded microparticles. The developed formulation (CBD-Mps) was effective as monotherapy, showing extended antiproliferative activity for at least 10 days, and when combined with PTX or DOX. In fact, the use of CBD-Mps allows the combination of both, pre and co-administration strategies, with a single administration, also showing a significant increase in PTX and DOX antiproliferative activity. Finally, the anticancer effect of both CBD_sol and CBD-Mps as monotherapy or in combination with PTX was also confirmed in ovo, usingMDA-MB-231-derived tumours. This data evidences the promising inclusion of CBD in conventional breast cancer chemotherapy and the use of CBD-Mps for the extended release of this cannabinoid, optimising the effect of the chemotherapeutic agents.

Enhanced solubility, stability, and transcorneal permeability of δ-8-tetrahydrocannabinol in the presence of cyclodextrins

The purpose of this study was to investigate the effect of cyclodextrins (CDs) on aqueous solubility, stability, and in vitro corneal permeability of delta-8-tetrahydrocannabinol (Δ(8)-THC). Phase solubility of Δ(8)-THC was studied in the presence of 2-hydroxypropyl-β-cyclodextrin (HPβCD), randomly methylated-β-cyclodextrin (RMβCD) and sulfobutyl ether-β-cyclodextrin sodium salt (SβCD). Stability of Δ(8)-THC in 5% w/v aqueous CD solutions, as a function of pH, was studied following standard protocols. In vitro corneal permeation of Δ(8)-THC (with and without CDs) across excised rabbit cornea was also determined. Phase-solubility profile of Δ(8)-THC in the presence of both HPβCD and RMβCD was of the A(P) type, whereas, with SβCD an A(L) type was apparent. Aqueous solubility of Δ(8)-THC increased to 1.65, 2.4, and 0.64 mg/mL in the presence of 25% w/v HPβCD, RMβCD, and SβCD, respectively. Significant degradation of Δ(8)-THC was not observed within the study period at the pH values studied, except for at pH 1.2. Transcorneal permeation of Δ(8)-THC was dramatically improved in the presence of CDs. The results demonstrate that CDs significantly increase aqueous solubility, stability, and transcorneal permeation of Δ(8)-THC. Thus, topical ophthalmic formulations containing Δ(8)-THC and modified beta CDs may show markedly improved ocular bioavailability.

Fast-dissolving sublingual solid dispersion and cyclodextrin complex increase the absorption of perphenazine in rabbits

OBJECTIVES

The sublingual administration route as well as solid dispersion formation with macrogol 8000 and complexation with β-cyclodextrin (β-CyD) were investigated as ways for improving the absorption of perphenazine, a poorly water-soluble drug subjected to substantial first-pass metabolism.

METHODS

The absorption of perphenazine was studied in rabbits after sublingual administration of perphenazine/macrogol solid dispersion, solid perphenazine/β-CyD complex and plain micronized perphenazine, as well as after peroral administration of an aqueous perphenazine solution. Solid formulations were prepared by freeze-drying (perphenazine/macrogol solid dispersion) or spray-drying (perphenazine/β-CyD complex).

KEY FINDINGS

The value for area under the curve from 0 to 360 min (AUC(0-360 min) ) of perphenazine after peroral administration was only 8% of the AUC(0-360 min) value obtained after intravenous administration, while the corresponding values for the sublingually administered formulations were 53% (perphenazine/macrogol solid dispersion), 41% (perphenazine/β-CyD complex) and 64% (micronized perphenazine). There are three possible mechanisms to explain these results: avoidance of the first-pass metabolism; good sublingual absorption of perphenazine; and rapid dissolution rate of perphenazine from the studied formulations.

CONCLUSIONS

With sublingual administration, the drug has to dissolve rapidly in a small volume of saliva. Based on the present absorption studies in rabbits, the solid dispersion preparation and cyclodextrin complexation were postulated to be useful ways to attain successful sublingual administration of perphenazine. Good sublingual absorption was also achieved by micronization of perphenazine. As far as we are aware, this paper is one of the first to evaluate the sublingual administration of a solid dispersion in vivo.

Physicochemical characterization of artemether solid dispersions with hydrophilic carriers by freeze dried and melt methods

Solid dispersions of artemether (ARM), a poorly soluble drug, were prepared using polyvinylpyrrolidone (PVPK25, MW 25000) and polyethyleneglycol (PEG4000, MW 4000) as excipients. These dispersions were studied by physical mixture, freeze-drying, and melting methods. They were characterized by X-ray diffraction pattern, fourier transform infrared spectrophotometry, differential scanning calorimetery, and dissolution studies. X-ray diffraction pattern revealed the complete crystalline nature of artemether, whereas physical mixtures, melt mixtures (MM), and freeze-dried solid dispersions (FDSD) of ARM-PVP and ARM-PEG showed reduced peak intensities with increased PVP/PEG content. PEG showed lower decreases in intensity than PVP preparations. Differential scanning calorimetery also confirmed this finding by showing either a small or absent endotherm. Red shifts in O-H stretching vibrations of ARM were higher in the MM of ARM-PVP than its FDSD as exhibited by fourier transform infrared spectrophotometry. The carbonyl peak of PEG was blue shifted in MM and FDSD, whereas the C=O peak of PVP was red shifted in FDSD and MM, indicating different H-bonding by PEG and PVP with ARM. The rate of dissolution (phosphate buffer at pH 4.5) was improved up to 4-fold in MM and FDSD compared to artemether, and up to 50% compared to physical mixtures. The preparation of solid dispersions influenced the rate of dissolution at various drug-carrier ratios, i.e., the dissolution order of 1:1-1:4 ratio was MM > FDSD; FDSD > MM at 1:6-1:8 ratios of both ARM-PVP and ARM-PEG; and FDSD of ARM-PEG > FDSD of ARM-PVP > MM of ARM-PEG > MM of ARM-PVP at a 1:10 ratio.

The novel application of tertiary butyl alcohol in the preparation of hydrophobic drug-HPβCD complex

This report describes a novel application of tertiary butyl alcohol (TBA) in the preparation of hydrophobic drug-hydroxypropyl β-cyclodextrin (HPβCD) complex. The straightforward, economic preparation procedure consists of dissolving both the hydrophobic drug and HPβCD in TBA, which is subsequently freeze-dried to give the hydrophobic drug-HPβCD complex in the form of a porous powder. TBA was selected as the medium due to it being a good solvent for hydrophobic drug and HPβCD; in addition, it is also a versatile lyophilization medium and is widely used in pharmaceutical processes. In this study, ketoprofen and nitrendipine were used as model drugs and their HPβCD complexes were prepared by lyophilization of the TBA system. Based on the data from differential scanning calorimetry (DSC) and X-ray diffractometry (XRD), the drugs were amorphous in freeze-dried samples. The infra-red (IR) spectrum indicated that a drug-HPβCD interaction took place in the freeze-dried complex. Dissolution experiments showed that the hydrophobic drug dissolved rapidly from the HPβCD complex in both simulated gastric juice and simulated intestinal fluid. These results confirmed that this technique produced a hydrophobic drug-HPβCD complex. TBA was found to be a suitable freeze-drying medium for the preparation of hydrophobic drug-HPβCD complex. This approach is versatile, energy-conserving and can easily be scaled up. It is expected to have further application in modifying the physicochemical characteristics of hydrophobic drugs and improving their absorption and pharmacodynamic properties.

Extended release promethazine HCl using acrylic polymers by freeze-drying and spray-drying techniques: formulation considerations

The present study investigated a novel extended release system of promethazine hydrochloride (PHC) with acrylic polymers Eudragit RL100 and Eudragit S100 in different weight ratios (1:1 and 1: 5), and in combination (0.5+1.5), using freeze-drying and spray-drying techniques. Solid dispersions were characterized by Fourier-transformed infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), Powder X-ray diffractometry (PXRD), Nuclear magnetic resonance (NMR), Scanning electron microscopy (SEM), as well as solubility and in vitro dissolution studies in 0.1 N HCl (pH 1.2), double-distilled water and phosphate buffer (pH 7.4). Adsorption tests from drug solution to solid polymers were also performed. A selected solid dispersion system was developed into capsule dosage form and evaluated for in vitro dissolution studies. The progressive disappearance of drug peaks in thermotropic profiles of spray-dried dispersions were related to increasing amount of polymers, while SEM studies suggested homogenous dispersion of drug in polymer. Eudragit RL100 had a greater adsorptive capacity than Eudragit S100, and thus its combination in (0.5+1.5) for S100 and RL 100 exhibited a higher dissolution rate with 97.14% drug release for twelve hours. Among different formulations, capsules prepared by combination of acrylic polymers using spray-drying (1:0.5 + 1.5) displayed extended release of drug for twelve hours with 96.87% release followed by zero order kinetics (r²= 0.9986).

Influence of plasticizers on the stability and release of a prodrug of Delta(9)-tetrahydrocannabinol incorporated in poly (ethylene oxide) matrices

The objective of this research was to stabilize a heat-labile novel prodrug of Delta(9)-tetrahydrocannabinol (THC), THC-hemiglutarate (THC-HG), in polyethylene oxide (PEO) [PolyOx WSR N-80 (PEO N-80), MW 200,000 Daltons] polymeric matrix systems produced by hot-melt fabrication for systemic delivery of THC through the oral transmucosal route. For this purpose, the effects of processing conditions (processing temperature and heating duration), plasticizer type and concentration and storage conditions on the stability of the prodrug were investigated. The selected plasticizers studied included vitamin E succinate (VES), acetyltributyl citrate (ATBC), triethyl citrate (TEC), triacetin and polyethylene glycol 8000 (PEG 8000). Furthermore, the influence of plasticizer concentration on drug release was also studied. The stability of THC-HG in PEO matrices was influenced by all the aforementioned variables. Films processed at 110 degrees C for 7min were found to be favorable for hot-melt processing with a post-processing drug content of 95%, while significant degradation of THC-HG ( approximately 42%) was observed in those processed at 200 degrees C for 15min. The degradation of the prodrug during hot-melt fabrication and also upon storage was considerably reduced in the presence of the plasticizers investigated, VES being the most effective. Modulation of the microenvironmental pH to an acidic range via incorporation of citric acid in PEO-plasticizer matrices significantly improved the stability of the prodrug, with almost 90% of the theoretical drug remaining as opposed to only 15% remaining in PEO-only matrices when stored at 40 degrees C for up to 3 months. The release of drug from PEO matrices was influenced both by the plasticizer type and concentration. A faster release resulted from water-soluble plasticizers, PEG 8000 and triacetin, and with increasing concentration. However, a slower release was observed with an increase in concentration of water-insoluble plasticizers, VES and ATBC.

Polymeric systems for amorphous Delta9-tetrahydrocannabinol produced by a hot-melt method. Part II: Effect of oxidation mechanisms and chemical interactions on stability

The objectives of the present research investigations were to (i) elucidate the mechanism for the oxidative degradation of Delta(9)-tetrahydrocannabinol (THC) in polymer matrix systems prepared by a hot-melt fabrication procedure, and (ii) study the potential for controlling these mechanisms to reduce the degradation of THC in solid dosage formulations. Various factors considered and applied included drug-excipient compatibility, use of antioxidants, cross-linking in polymeric matrices, microenvironment pH, and moisture effect. Instability of THC in polyethylene oxide (PEO)-vitamin E succinate (VES) patches was determined to be due to chemical interaction between the drug and the vitamin as well as with the atmospheric oxygen. Of the different classes and mechanisms of antioxidants studied, quenching of oxygen by reducing agents, namely, ascorbic acid was the most effective in stabilizing THC in PEO-VES matrices. Only 5.8% of the drug degraded in the ascorbic acid-containing patch as compared to the control (31.6%) after 2 months of storage at 40 degrees C. This coupled with the cross-linking extent and adjustment of the pH microenvironment, which seemed to have an impact on the THC degradation, might be effectively utilized towards stabilization of the drug in these polymeric matrices and other pharmaceutical dosage forms. These studies are relevant to the development of a stable transmucosal matrix system for the therapeutic delivery of amorphous THC.

Polymeric systems for amorphous Δ9-tetrahydrocannabinol produced by a hot-melt method. Part I: Chemical and thermal stability during processing

The objective of the present research was to investigate the stability of an amorphous drug, Delta(9)-tetrahydrocannabinol (THC) in polymer-based transmucosal systems. THC was incorporated in polyethylene oxide and hydroxypropylcellulose matrices by a hot-melt fabrication procedure, utilizing various processing aids. The chemical stability of the drug in the polymeric matrices was investigated with respect to processing temperature, processing time, formulation additives, and storage conditions. HPLC analysis of the THC-loaded systems indicated that the extent of drug degradation was influenced by all of the above mentioned variables. THC was particularly unstable in the vitamin E succinate-processed films, indicating a potential incompatibility. Thermal stability of the drug, polymers, and other ingredients at the elevated processing temperatures during the fabrication procedure, was evaluated using the isothermal mode of thermo-gravimetric analysis. When held at 160 and 200 degrees C, the weight percentage of THC decreased linearly as a function of time. Weight loss was controlled by blending the drug with polymers, PEO and HPC, of which PEO was determined to be more effective. Although higher temperatures lowered the polymer melt viscosity, THC and other materials were chemically and thermally unstable at such high temperatures. Due to this, matrix fabrication was found to be favorable at relatively lower temperatures, such as 120 degrees C.

Preparation of hydrophobic drugs cyclodextrin complex by lyophilization monophase solution

A novel method was evaluated for preparation of hydrophobic drugs cyclodextrin (CD) complex in this study. To obtain sterilized drug-CD complex lyophilized powder for injection or other purpose, the CD solution in water and the hydrophobic drug in tertiary butyl alcohol (TBA) were mixed in a suitable volume ratio, filtered through 0.22 microm millpores, and subsequently freeze-dried. A high drug concentration was obtained in the co-solvent due to the good solvency of TBA, which is miscible with water in any proportion, for hydrophobic drugs. Moreover, TBA could be removed rapidly and completely by freeze-drying because of its high vapor pressure and high melting point. The chemical stability of some labile active compounds was also improved in TBA-water co-solvent. Based on the data from differential scanning calormetry (DSC) and X-ray diffractometry (XRD), drug was amorphous in freeze-dried complex. The fourier transform infrared spectra indicated drug-CD interaction was present in drug-CD complex. An enhanced dissolution rate was also obtained in drug-CD complex. These results proved drug-CD complex had been formed after this technique. Thus, this report provided a simple, efficient, and economic technique for preparation of hydrophobic drugs CD complex, which may be useful practically in modifying hydrophobic drugs physicochemical properties and improving their absorption and pharmacodynamics.

Characterization of the molecular distribution of drugs in glassy solid dispersions at the nano-meter scale, using differential scanning calorimetry and gravimetric water vapour sorption techniques

The molecular distribution in fully amorphous solid dispersions consisting of poly(vinylpyrrolidone) (PVP)-diazepam and inulin-diazepam was studied. One glass transition temperature (T(g)), as determined by temperature modulated differential scanning calorimetry (TMDSC), was observed in PVP-diazepam solid dispersions prepared by fusion for all drug loads tested (10-80 wt.%). The T(g) of these solid dispersions gradually changed with composition and decreased from 177 degrees C for pure PVP to 46 degrees C for diazepam. These observations indicate that diazepam was dispersed in PVP on a molecular level. However, in PVP-diazepam solid dispersions prepared by freeze drying, two T(g)'s were observed for drug loads above 35 wt.% indicating phase separation. One T(g) indicated the presence of amorphous diazepam clusters, the other T(g) was attributed to a PVP-rich phase in which diazepam was dispersed on a molecular level. With both the value of the latter T(g) and the DeltaC(p) of the diazepam glass transition the concentrations of molecular dispersed diazepam could be calculated (27-35 wt.%). Both methods gave similar results. Water vapour sorption (DVS) experiments revealed that the PVP-matrix was hydrophobised by the incorporated diazepam. TMDSC and DVS results were used to estimate the size of diazepam clusters in freeze dried PVP-diazepam solid dispersions, which appeared to be in the nano-meter range. The inulin-diazepam solid dispersions prepared by spray freeze drying showed one T(g) for drug loads up to 35 wt.% indicating homogeneous distribution on a molecular level. However, this T(g) was independent of the drug load, which is unexpected because diazepam has a lower T(g) than inulin (46 and 155 degrees C, respectively). For higher drug loads, a T(g) of diazepam as well as a T(g) of the inulin-rich phase was observed, indicating the formation of amorphous diazepam clusters. From the DeltaC(p) of the diazepam glass transition the amount of molecularly dispersed diazepam was calculated (12-27 wt.%). In contrast to the PVP-diazepam solid dispersions, DVS-experiments revealed that inulin was not hydrophobised by diazepam. Consequently, the size of diazepam clusters could not be estimated. It was concluded that TMDSC enables characterization and quantification of the molecular distribution in amorphous solid dispersions. When the hygroscopicity of the carrier is reduced by the drug, DVS in combination with TMDSC can be used to estimate the size of amorphous drug clusters.

Spray freeze drying to produce a stable Δ9-tetrahydrocannabinol containing inulin-based solid dispersion powder suitable for inhalation

The purpose of this study is to investigate whether spray freeze drying produces an inhalable solid dispersion powder in which Delta(9)-tetrahydrocannabinol (THC) is stabilised. Solutions of THC and inulin in a mixture of tertiary butanol (TBA) and water were spray freeze dried. Drug loads varied from 4 to 30 wt.%. Various powder characteristics of the materials were determined. Stability of THC was determined and compared with freeze dried material. The powders, dispersed with an inhaler based on air classifier technology, were subjected to laser diffraction analysis and cascade impactor analysis. Highly porous particles having large specific surface areas (about 90 m(2)/g) were produced. At high drug loads, THC was more effectively stabilised by spray freeze drying than by freeze drying. Higher cooling rates during spray freeze drying result in improved incorporation. Fine particle fractions of up to 50% were generated indicating suitability for inhalation. It was concluded that spray freeze drying from a water-TBA mixture is a suitable process to include lipophilic drugs (THC) in inulin glass matrices. High cooling rates during the freezing process result in effective stabilisation of THC. The powders can be dispersed into aerosols with a particle size appropriate for inhalation.

Inulin is a promising cryo- and lyoprotectant for PEGylated lipoplexes

The aim of this study was to investigate whether the oligosaccharides dextran and inulin are able to prevent aggregation of lipoplexes based on 1,2-dioleoyl-3-trimethylammonium-propane and dioleoylphosphatidyl-ethanolamine with and without distearoylphosphatidylethanolamine-polyethyleneglycol (PEGylated and nonPEGylated lipoplexes, respectively) during storage. The lipoplexes, dispersed in the oligosaccharide solution were frozen and subsequently stored at subzero temperature or freeze dried and subsequently stored at 37 degrees C. When lipoplexes in frozen dispersions were stored below the glass transition temperature of the maximally freeze concentrated fraction (Tg') of the oligosaccharide solutions severe aggregation of the nonPEGylated lipoplexes was prevented for 3 months by both inulin and dextran. However, while dextran failed to stabilize the frozen PEGylated lipoplexes (as in most cases full aggregation occurred in short time) inulin successfully protected them against aggregation. Compared to dextran, inulin was also a superior lyoprotectant of PEGylated lipoplexes: during freeze drying and subsequent storage at 37 degrees C of the dried powders for 3 months the PEGylated lipoplexes maintained their original size when dispersed in inulin matrices while in dextran matrices they fully aggregated in most cases. It is hypothesized that the aggregation of the PEGylated lipoplexes in dextran solutions is caused by the well known incompatibility between dextrans and PEG. This is further supported by the observation that inulins and PEG are compatible. It is concluded that oligosaccharides can prevent severe aggregation of nonPEGylated lipoplexes. The same holds for PEGylated lipoplexes provided that the oligosaccharide is compatible with PEG. Finally, this work also shows that the higher Tg' of oligosaccharides makes them more versatile cryoprotectants than disaccharides like sucrose or trehalose as the frozen dispersions can be stored at higher temperatures for prolonged periods of time. Furthermore, it is proposed that oligosaccharides are also more versatile lyoprotectants than the disaccharides because they can be exposed to higher relative humidities without passing the glass transition temperature.

Anomalous dissolution behaviour of tablets prepared from sugar glass-based solid dispersions

In this study, anomalous dissolution behaviour of tablets consisting of sugar glass dispersions was investigated. The poorly aqueous soluble diazepam was used as a lipophilic model drug. The release of diazepam and sugar carrier was determined to study the mechanisms governing dissolution behaviour. The effect of carrier dissolution rate and drug load was tested with four different sugars, in the order of decreasing dissolution rates: sucrose, trehalose and two oligo-fructoses; inulinDP11 and inulinDP23 having a number average degree of polymerization (DP) of 11 and 23, respectively. Diazepam was incorporated in these sugar glasses in the amorphous state by means of freeze drying using water and tertiary butyl alcohol (TBA) as solvents. None of the tablets disintegrated during dissolution. Dissolution of 80% of the lipophilic drug within 20 min was found when diazepam and sugar dissolution profiles coincided. The sugar carrier and diazepam dissolved at the same rate, which was constant in time and fast. This condition was met for relatively slow dissolving carriers like the inulins or for low drug loads. For relatively fast dissolving carriers like sucrose or trehalose with high drug loads, release profiles of diazepam and sugar did not coincide: diazepam dissolved much more slowly than the sugars. In case of non-coinciding release profiles, diazepam release was split into three phases. During the first phase non-steady-state dissolution was observed: diazepam release accelerated and a drug rich layer consisting of crystalline diazepam was gradually formed. This first phase determined the further release of diazepam. During the second phase a steady-state release rate was reached: zero-order release was observed for both drug and carrier. During this phase, the remaining (non-crystallised) solid dispersion is dissolved without the further occurrence of crystallisation. The third phase, starting when all carrier is dissolved, involved the very slow dissolution of crystallised diazepam, which was present either as the skeleton of a tablet resulting in a zero-order release profile or as separate particles dispersed in the dissolution medium resulting in a first-order release. To understand the anomalous dissolution behaviour, a model is proposed. It describes the phenomena during dissolution of amorphous solid dispersion tablets and explains that fast dissolution is observed for low drug loads or slow dissolving carriers like inulin.