Fast-dissolving mucoadhesive microparticulate delivery system containing piroxicam

Nasal-PAMPA: A novel non-cell-based high throughput screening assay for prediction of nasal drug permeability

In nasal drug product development, screening studies are vital to select promising compounds or formulations. The Parallel Artificial Membrane Permeability Assay (PAMPA), a high throughput screening tool, has been applied to evaluate drug permeability across several barriers such as the skin or blood-brain barrier. Herein, a new nasal-PAMPA model was optimized to predict nasal permeability, using a biorelevant donor medium containing mucin. The apparent permeability (Papp) of 15 reference compounds was assessed in six different experimental conditions, and the most discriminating and predictive model was applied to a test drug (piroxicam) and mucoadhesive powder formulations loading the same drug. The model with 0.5% (w/v) mucin in the donor compartment and 2% (w/v) phosphatidylcholine in the lipid membrane accurately distinguished high and low permeable compounds. Additionally, it exhibited the highest correlation with permeation across human nasal epithelial cells, RPMI 2650 (R2 = 0.93). When applied to powder formulations, this model was sensitive to the presence of mucoadhesive excipients and the drug solid state. Overall, the nasal-PAMPA model was more rapid than cell-based assays, without requiring specialized training or equipment, showing to be a promising in vitro tool that can be applied in drug and formulation screening for nasal delivery.

Rapid Sublingual Delivery of Piroxicam from Electrospun Cyclodextrin Inclusion Complex Nanofibers

Piroxicam (Px) is a nonsteroidal anti-inflammatory drug (NSAID) used for the treatment of osteoarthritis and rheumatoid arthritis. It is administered orally; however, its poor water solubility causes low loading to the nonconventional drug delivery systems (DDSs), such as electrospun fibers. Furthermore, the rapid dissolution of DDS and fast release of the embedded drugs are crucial for oral delivery of drugs to patients who are unconscious or suffering from dysphagia. In this regard, this study reports the development of rapidly dissolving cyclodextrin (CD)-based inclusion complex (IC) nanofibers by waterborne electrospinning for fast oral delivery of Px. Scanning electron microscopy analysis revealed the formation of bead-free fibers with a mean diameter range of 170-500 nm at various concentrations of Px; increasing the Px loading decreased the fiber diameter. The formation of IC was demonstrated by X-ray diffraction (XRD) analysis by the disappearance of crystalline peaks of Px. Likewise, differential scanning calorimetry (DSC) analysis showed the disappearance of the melting peak of the embedded Px due to IC formation. Both Fourier transform infrared (FTIR) and thermogravimetric analysis (TGA) confirmed the presence of Px within the fibers. ¹H NMR experiments demonstrated Px preservation in the fibers after six months. Px-loaded nanofibers were employed for sublingual drug delivery. To mimic the environment of the mouth, the nanofibers were treated with artificial saliva, which revealed the instant dissolution of the nanofibers. Furthermore, dissolution experiments were performed on the tissues wetted with artificial saliva, where the dissolution of the fibers could be extended to a few seconds, demonstrating the suitability of the materials for sublingual oral drug delivery. Overall, this paper, for the first time, reports the rapid oral delivery of Px from polymer-free CD fibers produced by waterborne electrospinning without the requirement of any carrier polymer and toxic solvent.

Comparative Study Between Different Ready-Made Orally Disintegrating Platforms for the Formulation of Sumatriptan Succinate Sublingual Tablets

Sumatriptan succinate (SS) is a selective serotonin receptor agonist used for the treatment of migraine attacks, suffering from extensive first-pass metabolism and low oral bioavailability (∼14%). The aim of this work is to compare the performance of different ready-made co-processed platforms (Pharmaburst®, Prosolv ODT®, Starlac®, Pearlitol Flash®, or Ludiflash®) in the formulation of SS sublingual orodispersible tablets (ODTs) using direct compression technique. The prepared SS ODT formulae were evaluated regarding hardness, friability, simulated wetting time, and in vitro disintegration and dissolution tests. Different mucoadhesive polymers-HPMC K4M, Carbopol®, chitosan, or Polyox®-were tested aiming to increase the residence time in the sublingual area. A pharmacokinetic study on healthy human volunteers was performed, using LC/MS/MS assay, to compare the optimum sublingual formula (Ph25/HPMC) with the conventional oral tablet Imitrex®. Results showed that tablets prepared using Pharmaburst® had significantly (p < 0.05) the lowest simulated wetting and in vitro disintegration times of 17.17 and 23.50 s, respectively, with Q _5 min of 83.62%. HPMC showed a significant (p < 0.05) increase in the residence time from 48.44 to 183.76 s. The relative bioavailability was found to be equal to 132.34% relative to the oral tablet Imitrex®. In conclusion, Pharmaburst® was chosen as the optimum ready-made co-processed platform that can be successfully used in the preparation of SS sublingual tablets for the rapid relief of migraine attacks.

Formulation and evaluation of sublingual delivery of piroxicam using thermosensitive polymer with an inverted Franz diffusion cell

Objectives

The aim of the study was to prepare a sublingual formulation for piroxicam using a thermosensitive polymer and to evaluate its permeation through porcine sublingual mucosa.

Methods

Formulation technique utilized the transition property of poloxamer from solution state at room temperature to gel state at oromucosal temperature (37 °C). The permeation of the drug was evaluated using an inverted Franz diffusion cell technique that allowed the dosage form to be directly applied onto the substrate with required volume of saliva. The formulation was characterized for microscopy of the piroxicam crystals, sol–gel transition property and in-vitro diffusion study.

Key findings

Poloxamer-based formulation enhanced solubility and increased permeability of the piroxicam.

Conclusion

Poloxamer formulation with 0.1% w/w piroxicam delivered a cumulative amount of 11.99 ± 7.82 and 11.23 ± 1.79 μg/cm2, while non-poloxamer formulation delivered 3.57 ± 2.20 and 4.60 ± 6.90 μg/cm2 with 0.1 and 0.5 ml artificial saliva, respectively, through porcine sublingual tissue in 6 h. A similar delivery profile was observed for 0.05% w/w piroxicam formulation as well.

(14) N nuclear quadrupole resonance study of piroxicam: confirmation of new polymorphic form V

A new polymorphic crystal form of piroxicam was discovered while preparing crystalline samples of piroxicam for (14) N nuclear quadrupole resonance (NQR) analysis. The new crystal form, designated as V, was prepared by evaporative recrystallization from dichloromethane. Three known polymorphic forms (I, II, and III) were also prepared. Our aim was to apply (14) N NQR to characterize the new polymorphic form of piroxicam and compare the results with those of the other known polymorphic forms. Additional analytical methods used for characterization were X-ray powder diffraction (XRPD), thermal analysis, and vibrational spectroscopy. For the first time, a complete set of nine characteristic (14) N NQR frequencies was found for each prepared polymorph of piroxicam. The consistent set of measured frequencies and calculated characteristic quadrupole parameters found for the new polymorphic form V is a convincing evidence that we are dealing with a new form. The already known piroxicam polymorphic forms were characterized similarly. The XRPD results were in accordance with the conclusions of (14) N NQR analysis. The performed study clearly demonstrates a strong potential of (14) N NQR method to be applied as a highly discriminative spectroscopic analytical tool to characterize polymorphic forms.

Overview and appraisal of the current concept and technologies for improvement of sublingual drug delivery

Sublingual drug delivery is capable of achieving high bioavailability by avoiding first-pass liver extraction and enzymatic degradation in the gastrointestinal tract, as well as achieving rapid onset of effect. Thus, this route of administration can offer attractive therapeutic advantages for certain drugs as a convenient substitute for parenteral administration and has been applied successfully to a number of therapeutic conditions, especially urgent cardiovascular conditions and acute severe pain control. However, due to inherent limitations such as small sublingual mucosa area for absorption, primarily passive mechanism of transport, short residence time, and potential local irritation, a relatively small number of sublingual products have been successfully developed to date. In this Review, key concepts and technologies for potential improvement of sublingual drug delivery are reviewed. The optimal application of these concepts and technologies, together with clinical need for non-parenteral delivery, will hopefully broaden the development of sublingual drug delivery in the future.

Spray drying tenofovir loaded mucoadhesive and pH-sensitive microspheres intended for HIV prevention

PURPOSE

To develop spray dried mucoadhesive and pH-sensitive microspheres (MS) based on polymethacrylate salt intended for vaginal delivery of tenofovir (a model HIV microbicide) and assess their critical biological responses.

METHODS

The formulation variables and process parameters are screened and optimized using a 2(4-1) fractional factorial design. The MS are characterized for size, zeta potential, yield, encapsulation efficiency, Carr's index, drug loading, in vitro release, cytotoxicity, inflammatory responses and mucoadhesion.

RESULTS

The optimal MS formulation has an average size of 4.73μm, zeta potential of -26.3mV, 68.9% yield, encapsulation efficiency of 88.7%, Carr's index of 28.3 and drug loading of 2% (w/w). The MS formulation release 91.7% of its payload in the presence of simulated human semen. At a concentration of 1mg/ml, the MS are noncytotoxic to vaginal endocervical/epithelial cells and Lactobacillus crispatus when compared to control media. There is also no statistically significant level of inflammatory cytokine (IL1-α, IL-1β, IL-6, IL-8, and IP-10) release triggered by these MS. Their percent mucoadhesion is 2-fold higher than that of 1% HEC gel formulation.

CONCLUSION

These data suggest the promise of using such MS as an alternative controlled microbicide delivery template by intravaginal route for HIV prevention.

Enhancing the aqueous solubility and dissolution of olanzapine using freeze-drying

The aim of the present study was to develop an olanzapine freeze-dried tablet (FDT). The solubility and dissolution rate of poorly water-soluble olanzapine was improved by preparing a freeze-dried tablet of olanzapine using the freeze-drying technique . The FDT was prepared by dispersing the drug in an aqueous solution of highly water-soluble carrier materials consisting of gelatin, glycine, and sorbitol. The mixture was poured in to the pockets of blister packs and then was subjected to freezing and lyophilisation. The FDT was characterised by DSC, XRD and SEM and was evaluated for saturation solubility and dissolution. The samples were stored in a stability chamber to investigate their physical stability. Results obtained by DSC and X-ray were analysed and showed the crystalline state of olanzapine in FDT transformation to the amorphous state during the formation of FDT. Scanning electron microscope (SEM) results suggest reduction in olanzapine particle size. The solubility of olanzapine from the FDT was observed to be nearly four and a half times greater than the pure drug. Results obtained from dissolution studies showed that olanzapine FDT significantly improved the dissolution rate of the drug compared with the physical mixture (PM) and the pure drug. More than 90% of olanzapine in FDT dissolved within 5 minutes, compared to only 19.78% of olanzapine pure drug dissolved over the course of 60 minutes. In a stability test, the release profile of the FDT was unchanged, as compared to the freshly prepared FDT after 90 days of storing.

Nanocrystals as tool to improve piroxicam dissolution rate in novel orally disintegrating tablets

In this paper, orally disintegrating tablets (ODT) were prepared using nanocrystal formulations in order to optimise dissolution properties of lipophilic, poorly soluble drug piroxicam (PRX). Different nanocrystal formulations were prepared using a high pressure homogenisation technique and poloxamer 188 as stabiliser. Characterisation of PRX nanocrystal ODT was carried out by infrared spectroscopy (FTIR), X-ray powder diffractometry (XRPD), differential scanning calorimetry and photon correlation spectroscopy. Dissolution study of PRX ODT was performed in distilled water (pH 5.5) and was compared to that of PRX coarse suspension ODT, PRX/poloxamer 188 physical mixture and bulk PRX samples. The XRPD and FTIR studies demonstrated that the homogenisation process led to a polymorphic transition from form I (bulk commercial PRX) to form III and monohydrate form of the nanocrystals. All ODT formulations prepared using PRX nanosuspensions showed a higher PRX dissolution rate compared with the ODT prepared with the coarse PRX. Since the solubility of the different PRX polymorphic forms increased only slightly from bulk PRX (form I) to monohydrate, form II and form III, we can conclude that the improvement in PRX dissolution rate is mainly caused by the increased surface-to-volume ratio due to the submicron dimension of the drug particles.

Oral fast-dissolving drug delivery membranes prepared from electrospun polyvinylpyrrolidone ultrafine fibers

Oral fast-dissolving drug delivery membranes (FDMs) for poorly water-soluble drugs were prepared via electrospinning technology with ibuprofen as the model drug and polyvinylpyrrolidone (PVP) K30 as the filament-forming polymer and drug carrier. Results from differential scanning calorimetry, x-ray diffraction, and morphological observations demonstrated that ibuprofen was distributed in the ultrafine fibers in the form of nanosolid dispersions and the physical status of drug was an amorphous or molecular form, different from that of the pure drug and a physical mixture of PVP and ibuprofen. Fourier-transform infrared spectroscopy results illustrated that the main interactions between PVP and ibuprofen were mediated through hydrogen bonding. Pharmacotechnical tests showed that FDMs with different drug contents had almost the same wetting and disintegrating times, about 15 and 8 s, respectively, but significantly different drug dissolution rates due to the different physical status of the drug and the different drug-release-controlled mechanisms. 84.9% and 58.7% of ibuprofen was released in the first 20 s for FDMs with a drug-to-PVP ratio of 1:4 and 1:2, respectively. Electrospun ultrafine fibers have the potential to be used as solid dispersions to improve the dissolution profiles of poorly water-soluble drugs or as oral fast disintegrating drug delivery systems.

Pharmaceutical particle engineering via spray drying

This review covers recent developments in the area of particle engineering via spray drying. The last decade has seen a shift from empirical formulation efforts to an engineering approach based on a better understanding of particle formation in the spray drying process. Microparticles with nanoscale substructures can now be designed and their functionality has contributed significantly to stability and efficacy of the particulate dosage form. The review provides concepts and a theoretical framework for particle design calculations. It reviews experimental research into parameters that influence particle formation. A classification based on dimensionless numbers is presented that can be used to estimate how excipient properties in combination with process parameters influence the morphology of the engineered particles. A wide range of pharmaceutical application examples—low density particles, composite particles, microencapsulation, and glass stabilization—is discussed, with specific emphasis on the underlying particle formation mechanisms and design concepts.