Bioavailability and variability of biphasic insulin mixtures

Assessment of subcutaneously administered insulins using in vitro release cartridge: Medium composition and albumin binding

Biotherapeutics is the fastest growing class of drugs administered by subcutaneous injection. In vitro release testing mimicking physiological conditions at the injection site may guide formulation development and improve biopredictive capabilities. Here, anin vitrorelease cartridge (IVR cartridge) comprising a porous agarose matrix emulating subcutaneous tissue was explored. The objective was to assess effects of medium composition and incorporation of human serum albumin into the matrix. Drug disappearance was assessed for solution, suspension and in situ precipitating insulin products (Actrapid, Levemir, Tresiba, Mixtard 30, Insulatard, Lantus) using the flow-based cartridge. UV-Vis imaging and light microscopy visualized dissolution, precipitation and albumin binding phenomena at the injection site. Divalent cations present in the release medium resulted in slower insulin disappearance for suspension-based and in situ precipitating insulins. Albumin-binding acylated insulin analogs exhibited rapid disappearance from the cartridge; however, sustained retention was achieved by coupling albumin to the matrix. An in vitro-in vivorelation was established for the non-albumin-binding insulins.The IVR cartridge is flexible with potential in formulation development as shown by the ability to accommodate solutions, suspensions, and in situ forming formulations while tailoring of the system to probe in vivo relevant medium effects and tissue constituent interactions.

Exploring the Higher Order Structure and Conformational Transitions in Insulin Microcrystalline Biopharmaceuticals by Proton-Detected Solid-State Nuclear Magnetic Resonance at Natural Abundance

The integrity of a higher order structure (HOS) is an essential requirement to ensure the efficacy, stability, and safety of protein therapeutics. Solution-state nuclear magnetic resonance (NMR) occupies a unique niche as one of the most promising methods to access atomic-level structural information on soluble biopharmaceutical formulations. Another major class of drugs is poorly soluble, such as microcrystalline suspensions, which poses significant challenges for the characterization of the active ingredient in its native state. Here, we have demonstrated a solid-state NMR method for HOS characterization of biopharmaceutical suspensions employing a selective excitation scheme under fast magic angle spinning (MAS). The applicability of the method is shown on commercial insulin suspensions at natural isotopic abundance. Selective excitation aided with proton detection and non-uniform sampling (NUS) provides improved sensitivity and resolution. The enhanced resolution enabled us to demonstrate the first experimental evidence of a phenol-escaping pathway in insulin, leading to conformational transitions to different hexameric states. This approach has the potential to serve as a valuable means for meticulously examining microcrystalline biopharmaceutical suspensions, which was previously not attainable in their native formulation states and can be seamlessly extended to other classes of biopharmaceuticals such as mAbs and other microcrystalline proteins.

Insulin induces a progressive increase in the resistance of subcutaneous tissue to fluid flow: Implications for insulin pump therapy

AIM

To determine the effect of insulin on the resistance of subcutaneous tissue to the flow of infusion fluids.

MATERIALS AND METHODS

Thirty subjects with type 1 diabetes wore two Accu-Chek Spirit Combo insulin pumps with Accu-Chek FlexLink infusion sets (Roche Diabetes Care, Mannheim, Germany) for 7 days. One pump was filled with insulin aspart (Novo Nordisk, Bagsvaerd, Denmark) and used for continuous subcutaneous insulin infusion (CSII). The other pump was filled with insulin diluting medium (IDM; Novo Nordisk) and used to deliver IDM subcutaneously at rates identical to those employed for CSII. Both infusion sites were assessed daily by measuring the pressure required to infuse various bolus amounts of IDM.

RESULTS

On day 1, maximum pressure (P_max ) and tissue flow resistance (TFR; calculated from measured pressure profiles) were similar for both infusion sites (P > 0.20). During the subsequent study days, the P_max and TFR values observed at the IDM infusion site remained at levels comparable to those seen on day 1 (P > 0.13). However, at the site of CSII, P_max and TFR progressively increased with CSII duration. By the end of day 7, P_max and TFR reached 25.8 */2.11 kPa (geometric mean */geometric standard deviation) and 8.64 */3.48 kPa*s/μL, respectively, representing a remarkable 3.5- and 20.6-fold increase relative to the respective P_max and TFR values observed on day 1 (P < 0.001).

CONCLUSION

Our results suggest that insulin induces a progressive increase in the resistance of subcutaneous tissue to the introduction of fluid; this has important implications for the future design of insulin pumps and infusion sets.

Towards in vitro in vivo correlation for modified release subcutaneously administered insulins

Therapeutic proteins and peptides are mainly administrated by subcutaneous injection. In vitro release testing of subcutaneous injectables performed using methods that take the structure and environment of the subcutaneous tissue into account may improve predictability of the in vivo behavior and thereby facilitate establishment of in vitro in vivo correlations. The aim of the study was to develop a biopredictive flow-through in vitro release method with a gel-type matrix for subcutaneously administered formulations and to explore the possibility of establishing a level A in vitro in vivo correlation for selected insulin products. A novel gel-based flow-through method with the incorporation of an injection step was used to assess selected commercial insulin formulations with different duration of action (Actrapid®, Mixtard® 30, Insulatard®, Lantus®). The in vitro release method provided the correct rank ordering in relation to the in vivo performance. For the modified release insulins Insulatard® and Lantus®, an in vitro in vivo correlation using non-linear time scaling was established based on the in vitro release data and in vivo subcutaneous absorption data of the ¹²⁵I-labeled insulins taken from literature. Predicted absorption profiles were constructed using the in vitro in vivo correlation and subsequently converted into simulated plasma profiles. The approach taken may be of wider utility in characterizing injectables for subcutaneous administration.

Concentrated insulins in current clinical practice

New concentrated insulins (exceeding 100 units/mL) and dedicated devices have recently become available, offering new treatment options for people with diabetes, for basal and prandial insulin supplementation. The concentrated insulin formulations range from 2-fold concentration (insulin lispro 200 units/mL) with rapid-acting prandial action to 5-fold concentration (human regular insulin, 500 units/mL) with basal and short-acting prandial actions. Long-acting basal insulins include degludec 200 units/mL and glargine 300 units/mL. Concentrated insulins have been developed with the goal of easing insulin therapy by reducing the volume and number of injections and in some cases making use of altered pharmacokinetic and pharmacodynamic properties. This review summarizes the unique characteristics of each concentrated insulin to help healthcare providers and people with diabetes understand how to best use them.

Insulin depot absorption modeling and pharmacokinetic simulation with insulin glargine 300 U/mL

OBJECTIVE

Mathematical models of insulin absorption have been used to predict plasma insulin concentrations after administration, but few are specifically applicable to insulin glargine, which precipitates subcutaneously after injection.

MATERIALS AND METHODS

The formation and redissolution of subcutaneous depots of insulin glargine 100 U/mL (Gla-100) and insulin glargine 300 U/mL (Gla-300) are modeled. Surface-area-dependent redissolution is introduced to established diffusion and absorption pathways, and pharmacokinetic (PK) profiles are simulated and subsequently validated using experimental data from euglycemic glucose clamp studies. Simulations are used to predict the PK effect of adapting the timing of once-daily insulin injections and of switching from one insulin product to the other. -Results: Simulated PK profiles resemble those previously observed in clinical trials, with Gla-300 providing more gradual and prolonged release of Gla-300 vs. Gla-100, owing to a more compact depot. The predicted PK profile of Gla-300 shows less fluctuation in plasma insulin concentrations than that of Gla-100, and may be better suited to adapting the timing of daily injections to account for variation in daily activities. Simulating a switch from one insulin glargine product to the other results in temporary alteration of previous steady state, but this is regained within ~ 3 days.

CONCLUSION

This study suggests that PK differences between Gla-300 and Gla-100 are a product of the more compact Gla-300 depot and its smaller surface area. The model employed also allowed estimation of insulin glargine concentrations when varying the time interval between injections as well as when switching from one insulin glargine product to the other.
.

Challenges and Opportunities for the Subcutaneous Delivery of Therapeutic Proteins

Biotherapeutics is a rapidly growing drug class, and over 200 biotherapeutics have already obtained approval, with about 50 of these being approved in 2015 and 2016 alone. Several hundred protein therapeutic products are still in the pipeline, including interesting new approaches to treatment. Owing to patients' convenience of at home administration and reduced number of hospital visits as well as the reduction in treatment costs, subcutaneous (SC) administration of biologics is of increasing interest. Although several avenues for treatment using biotherapeutics are being explored, there is still a sufficient gap in knowledge regarding the interplay of formulation conditions, immunogenicity, and pharmacokinetics (PK) of the absorption of these compounds when they are given SC. This review seeks to highlight the major concerns and important factors governing this route of administration and suggest a holistic approach for effective SC delivery.

Day-to-Day and Within-Day Variability in Glucose-Lowering Effect Between Insulin Degludec and Insulin Glargine (100 U/mL and 300 U/mL): A Comparison Across Studies

BACKGROUND

Insulin degludec (IDeg) has significantly lower day-to-day and within-day variability compared to insulin glargine (IGlar) 100U/mL (U100) and 300U/mL (U300). Here, we report post hoc assessments to confirm the robustness of these observations while accounting for potential experimental confounders.

METHODS

Two euglycemic clamp studies in type 1 diabetes patients, comparing IDeg to IGlar-U100 (Study A, parallel design, 54 patients; Study B, crossover, 22 patients) and one study comparing IDeg to IGlar-U300 (Study C, crossover, 57 patients), all dosed at 0.4U/kg, were evaluated. Pharmacodynamic parameters were assessed at steady state from glucose infusion rate (GIR) profiles following three 24-hour euglycemic clamps in Studies A (162 clamps) and C (342 clamps), and one 42-hour clamp in Study B (44 clamps).

RESULTS

Pooled data (Studies A and B) showed that IDeg had an even distribution of glucose-lowering effect over the 24-hour dosing interval that was consistent with Study C. IGlar-U100 showed a constant decrease in glucose-lowering effect over 24 hours while IGlar-U300 had a lower effect in the middle of the dosing interval (6-18 hours). Relative within-day variability of IDeg was 40% and 37% lower than IGlar-U100 and -U300, respectively. Exclusion of profiles with low response in Study C (19/342 clamps) did not impact the difference in the distribution of glucose-lowering effect or within-day variability. Day-to-day variability was significantly lower with IDeg compared to IGlar-U100 and -U300 based on smoothed and unsmoothed GIR data.

CONCLUSIONS

Significantly lower relative within-day and day-to-day variability was confirmed irrespective of experimental considerations for IDeg compared to IGlar-U100 and IGlar-U300.

Factors Affecting the Absorption of Subcutaneously Administered Insulin: Effect on Variability

Variability in the effect of subcutaneously administered insulin represents a major challenge in insulin therapy where precise dosing is required in order to achieve targeted glucose levels. Since this variability is largely influenced by the absorption of insulin, a deeper understanding of the factors affecting the absorption of insulin from the subcutaneous tissue is necessary in order to improve glycaemic control and the long-term prognosis in people with diabetes. These factors can be related to either the insulin preparation, the injection site/patient, or the injection technique. This review highlights the factors affecting insulin absorption with special attention on the physiological factors at the injection site. In addition, it also provides a detailed description of the insulin absorption process and the various modifications to this process that have been utilized by the different insulin preparations available.

Impact of the mode of protraction of basal insulin therapies on their pharmacokinetic and pharmacodynamic properties and resulting clinical outcomes

Manufacturers of insulin products for diabetes therapy have long sought ways to modify the absorption rate of exogenously administered insulins in an effort to better reproduce the naturally occurring pharmacokinetics of endogenous insulin secretion. Several mechanisms of protraction have been used in pursuit of a basal insulin, for which a low injection frequency would provide tolerable and reproducible glucose control; these mechanisms have met with varying degrees of success. Before the advent of recombinant DNA technology, development focused on modifications to the formulation that increased insulin self-association, such as supplementation with zinc or the development of preformed precipitates using protamine. Indeed, NPH insulin remains widely used today despite a frequent need for a twice-daily dosing and a relatively high incidence of hypoglycaemia. The early insulin analogues used post-injection precipitation (insulin glargine U100) or dimerization and albumin binding (insulin detemir) as methods of increasing therapeutic duration. These products approached a 24-hour glucose-lowering effect with decreased variability in insulin action. Newer basal insulin analogues have used up-concentration in addition to precipitation (insulin glargine U300), and multihexamer formation in addition to albumin binding (insulin degludec), to further increase duration of action and/or decrease the day-to-day variability of the glucose-lowering profile. Clinically, the major advantage of these recent analogues has been a reduction in hypoglycaemia with similar glycated haemoglobin control when compared with earlier products. Future therapies may bring clinical benefits through hepato-preferential insulin receptor binding or very long durations of action, perhaps enabling once-weekly administration and the potential for further clinical benefits.

Insulin aspart pharmacokinetics: an assessment of its variability and underlying mechanisms

BACKGROUND

Insulin aspart (IAsp) is used by many diabetics as a meal-time insulin to control post-prandial glucose levels. As is the case with many other insulin types, the pharmacokinetics (PK), and consequently the pharmacodynamics (PD), is associated with clinical variability, both between and within individuals. The present article identifies the main physiological mechanisms that govern the PK of IAsp following subcutaneous administration and quantifies them in terms of their contribution to the overall variability.

MATERIAL AND METHODS

CT scanning data from Thomsen et al. (2012) are used to investigate and quantify the properties of the subcutaneous depot. Data from Brange et al. (1990) are used to determine the effects of insulin chemistry in subcutis on the absorption rate. Intravenous (i.v.) bolus and infusion PK data for human insulin are used to understand and quantify the systemic distribution and elimination (Pørksen et al., 1997; Sjöstrand et al., 2002). PK and PD profiles for type 1 diabetics from Chen et al. (2005) are analyzed to demonstrate the effects of IAsp antibodies in terms of bound and unbound insulin. PK profiles from Thorisdottir et al. (2009) and Ma et al. (2012b) are analyzed in the nonlinear mixed effects software Monolix® to determine the presence and effects of the mechanisms described in this article.

RESULTS

The distribution of IAsp in the subcutaneous depot show an initial dilution of approximately a factor of two in a single experiment. Injected insulin hexamers exist in a chemical equilibrium with monomers and dimers, which depends strongly on the degree of dilution in subcutis, the presence of auxiliary substances, and a variety of other factors. Sensitivity to the initial dilution in subcutis can thus be a cause of some of the variability. Temporal variations in the PK are explained by variations in the subcutaneous blood flow. IAsp antibodies are found to be a large contributor to the variability of total insulin PK in a study by Chen et al. (2005), since only the free fraction is eliminated via the receptors. The contribution of these and other sources of variability to the total variability is quantified via a population PK analysis and two recent clinical studies (Thorisdottir et al., 2009; Ma et al., 2012b), which support the presence and significance of the identified mechanisms.

CONCLUSIONS

IAsp antibody binding, oligomeric transitions in subcutis, and blood flow dependent variations in absorption rate seem to dominate the PK variability of IAsp. It may be possible via e.g. formulation design to reduce some of these variability factors.