Novel thermosensitive in situ gel based on poloxamer for uterus delivery

Locationally activated PRP via an injectable dual-network hydrogel for endometrial regeneration

Enhancing the effectiveness of platelet-rich plasma (PRP) for endometrial regeneration is challenging, due to its limited mechanical properties and burst release of growth factors. Here, we proposed an injectable interpenetrating dual-network hydrogel that can locationally activate PRP within the uterine cavity, sustained release growth factors and further address the insufficient therapeutic efficacy. Locational activation of PRP is achieved using the dual-network hydrogel. The phenylboronic acid (PBA) modified methacrylated hyaluronic acid (HAMA) dispersion chelates Ca2+ by carboxy groups and polyphenol groups, and in situ crosslinked with PRP-loaded polyvinyl alcohol (PVA) dispersion by dynamic borate ester bonds thus establishing the soft hydrogel. Subsequently, in situ photo-crosslinking technology is employed to enhance the mechanical performance of hydrogels by initiating free radical polymerization of carbon-carbon double bonds to form a dense network. The PRP-hydrogel significantly promoted the endometrial cell proliferation, exhibited strong pro-angiogenic effects, and down-regulated the expression of collagen deposition genes by inhibiting the TGF-β1-SMAD2/3 pathway in vitro. In vivo experiments using a rat intrauterine adhesion (IUA) model showed that the PRP-hydrogel significantly promoted endometrial regeneration and restored uterine functionality. Furthermore, rats treated with the PRP-hydrogel displayed an increase in the number of embryos, litter size, and birth rate, which was similar to normal rats. Overall, this injectable interpenetrating dual-network hydrogel, capable of locational activation of PRP, suggests a new therapeutic approach for endometrial repair.

In-situ gel injection of poloxamer-based metamizole provides long-acting antipyretic effects

Metamizole easily decomposes in the body and has a short action time and low bioavailability. Hence, frequent injection administrations are needed to maintain its plasma concentration. This study aimed to design and develop an in-situ gel based on poloxamer 407 and 188 to assess its long-acting antipyretic effects. The in-situ gel-forming systep00m with optimum sol-gel transition temperature of 35.9 °C to 36.3 °C could be formed using a combination of P407 at a ratio of 21-23% (w/v) and P188 at a ratio of 2-4% (w/v). In vitro erosion test showed that the in-situ gel's erosion curve and the metamizole release rate both reached about 90% at 6 h, revealing a good linear relationship between the in-situ gel erosion and the drug release. In vitro release test with dialysis tube showed that the release of metamizole from the in-situ gel was remarkably slower than that from the metamizole solution. Approximately 85% of metamizole was released in the dialysis tube within 7 h, implying a good sustained release effect. Pharmacodynamic study showed that the in-situ gel injection extended the action time of metamizole relative to that when using the metamizole solution. Pharmacokinetic study revealed that the in-situ gel significantly increased the blood serum half-life and area under the curve), contributing to a sustained release and improved bioavailability. This study demonstrated that in-situ gel injection could prolong the action of metamizole in the body to reduce the number of administration times and has good clinical application.

Novel Drug Delivery Approaches for the Localized Treatment of Cervical Cancer

Cervical cancer (CC) is the fourth leading cancer type in females globally. Being an ailment of the birth canal, primitive treatment strategies, including surgery, radiation, or laser therapy, bring along the risk of infertility, neonate mortality, premature parturition, etc. Systemic chemotherapy led to systemic toxicity. Therefore, delivering a smaller cargo of therapeutics to the local site is more beneficial in terms of efficacy as well as safety. Due to the regeneration of cervicovaginal mucus, conventional dosage forms come with the limitations of leaking, the requirement of repeated administration, and compromised vaginal retention. Therefore, these days novel strategies are being investigated with the ability to combat the limitations of conventional formulations. Novel carriers can be engineered to manipulate bioadhesive properties and sustained release patterns can be obtained thus leading to the maintenance of actives at therapeutic level locally for a longer period. Other than the purpose of CC treatment, these delivery systems also have been designed as postoperative care where a certain dose of antitumor agent will be maintained in the cervix postsurgical removal of the tumor. Herein, the most explored localized delivery systems for the treatment of CC, namely, nanofibers, nanoparticles, in situ gel, liposome, and hydrogel, have been discussed in detail. These carriers have exceptional properties that have been further modified with the aid of a wide range of polymers in order to serve the required purpose of therapeutic effect, safety, and stability. Further, the safety of these delivery systems toward vital organs has also been discussed.

Aldehyde group pendant-grafted pectin-based injectable hydrogel

Periodate oxidation has been the widely accepted route for obtaining aldehyde group-functionalized polysaccharides but significantly influenced the various physicochemical properties due to the ring opening of the backbone of polysaccharides. The present study, for the first time, presents a novel method for the preparation of aldehyde group-functionalized polysaccharides that could retain the ring structure and the consequent rigidity of the backbone. Pectin was collected as the representative of polysaccharides and modified with cyclopropyl formaldehyde to obtain pectin aldehyde (AP), which was further crosslinked by DL-lysine (LYS) via the Schiff base reaction to prepare injectable hydrogel. The feasibility of the functionalization was proved by FT-IR and 1H NMR techniques. The obtained hydrogel showed acceptable mechanical properties, self-healing ability, syringeability, and sustained-release performance. Also, as-prepared injectable hydrogel presented great biocompatibility with a cell proliferation rate of 96 %, and the drug-loaded hydrogel exhibited clear inhibition of cancer cell proliferation. Overall, the present study showed a new method for the preparation of aldehyde group-functionalized polysaccharides, and the drug-loaded hydrogel has potential in drug release applications.

Pectin Nanoparticle-Loaded Soft Coral Nephthea sp. Extract as In Situ Gel Enhances Chronic Wound Healing: In Vitro, In Vivo, and In Silico Studies

This study shed light for the first time on the in vivo diabetic wound healing potential activity of natural marine soft coral polymeric nanoparticle in situ gel using an excision wound model. A Nephthea sp. methanol-methylene chloride extract loaded with pectin nanoparticles (LPNs) was created. For the preparation of in situ gel, ion-gelation techniques, the entrapment efficiency, the particle size, the polydispersity index, the zeta potential, the in-vitro drug release, and a transmission electron microscope were used and the best formula was selected. Using (UPLC-Q/TOF-MS), 27 secondary metabolites responsible for extract biological activity were identified. Isolation and identification of arachidic acid, oleic acid, nervonic acid, and bis-(2-ethylhexyl)-phthalate (DEHP) of Nephthea sp. was firstly reported here using NMR and mass spectral analyses. Moreover, LPN in situ gel has the best effects on regulating the proinflammatory cytokines (NF-κB, TNF-α, IL-6, and IL-1β) that were detected on days 7 and 15. The results were confirmed with an in vitro enzymatic inhibitory effect of the extract against glycogen synthase kinase (GSK-3) and matrix metalloproteinase-1 (MMP-1), with IC₅₀ values of 0.178 ± 0.009 and 0.258 ± 0.011 µg/mL, respectively. The molecular docking study showed a free binding energy of -9.6 kcal/mol for chabrolosteroid E, with the highest binding affinity for the enzyme (GSK-3), while isogosterone B had -7.8 kcal/mol for the enzyme (MMP-1). A pharmacokinetics study for chabrolohydroxybenzoquinone F and isogosterone B was performed, and it predicted the mode of action of wound healing activity.

Poloxamers Have Vaccine-Adjuvant Properties by Increasing Dissemination of Particulate Antigen at Distant Lymph Nodes

Vaccine technology is still facing challenges regarding some infectious diseases, which can be addressed by innovative drug delivery systems. In particular, nanoparticle-based vaccines combined with new types of adjuvants are actively explored as a platform for improving the efficacy and durability of immune protection. Here, biodegradable nanoparticles carrying an antigenic model of HIV were formulated with two combinations of poloxamers, 188/407, presenting or not presenting gelling properties, respectively. The study aimed to determine the influence of poloxamers (as a thermosensitive hydrogel or a liquid solution) on the adaptive immune response in mice. The results showed that poloxamer-based formulations were physically stable and did not induce any toxicity using a mouse dendritic cell line. Then, whole-body biodistribution studies using a fluorescent formulation highlighted that the presence of poloxamers influenced positively the dissemination profile by dragging nanoparticles through the lymphatic system until the draining and distant lymph nodes. The strong induction of specific IgG and germinal centers in distant lymph nodes in presence of poloxamers suggested that such adjuvants are promising components in vaccine development.

Physicochemical properties of otic products for Canine Otitis Externa: comparative analysis of marketed products

BACKGROUND

Otitis externa is a commonly diagnosed dermatological disorder in canines. The pathogens primarily involved in canine otitis externa (COE) include Staphylococcus pseudintermedius, Pseudomonas aeruginosa, Proteus mirabilis, and Malassezia pachydermatis. As COE tends to be superficial, medications delivered topically are often effective and practical in managing the condition. As such, there is a wide variety of approved topical products currently available in the market. The efficacy of topical dosage forms can be dependent on various factors such as the pharmacology of active constituents and the physicochemical properties of the formulation, including pH, viscosity, spreadability, and bio-adhesion. Currently, there is a lack of published literature available on the optimal properties of topical COE products. In this study, we compared the physicochemical properties of nine commercially available otic veterinarian products in Australia used clinically to manage COE.

RESULTS

Based on our comparative analysis, the pH (6.26 ± 0.04) of an aqueous-based product was similar to a healthy dog's external auditory canal. Products containing polymers exhibited higher viscosity and bio-adhesion. Spreadability was inversely related to viscosity and Osurnia ® a product with high viscosity demonstrated the lowest spreadability. Aqueous-based otic products showed better syringebility whereas oil-based systems required higher force to expel the products. Variability in droplet size was noted. Derm Otic, Baytril Otic, and Aurizon Ear Drops had the lower standard deviation which indicates they would give a more consistent dose.

CONCLUSIONS

Findings from this work provide considerations for industry researchers or formulation scientists working in the area of otic dosage formulations.

Deoxycholic acid-chitosan coated liposomes combined with in situ colonic gel enhances renal fibrosis therapy of emodin

BACKGROUND

Renal fibrosis is the final common pathological feature of various chronic kidney diseases (CKD). Despite recent advances, development of new treatments strategy is needed. Emodin (EMO), an important ingredient of Chinese medicine, rhubarb (Polygonaceae Rheum palmatum l.), has been reported to inhibit the development of renal fibrosis effectively. However, the poor oral bioavailability of EMO and the insufficient monotherapy therapy compromise its efficacy.

PURPOSE

In order to enhance renal fibrosis therapy of emodin, an innovative combination therapy based on deoxycholic acid-chitosan coated liposomes (DCS-Lips) and in situ colonic gel (IGE) was developed.

METHODS

For one, the DCS-Lips were prepared via electrostatic interaction by mixing anionic conventional Lips with cationic DCS, deoxycholic acid conjugated on the backbone of chitosan. The cellular uptake of FITC-labeled DCS-Lips in Caco-2 cell monolayer was evaluated by CLSM and flow cytometry, respectively. Permeability study was carried out using Caco-2 cell monolayer. For another, EMO-loaded in situ colonic gel (EMO-IGE) was prepared by mixing EMO nanosuspensions and plain in situ gel, which was obtained by the cold method. The EMO-IGE was assessed for morphology, gelation temperature, viscosity and in vitro drug release. Finally, the therapeutic efficacy of the combination strategy, oral DCS-Lips formulations and in situ colonic gel, was evaluated in unilateral ureteral obstruction (UUO) rat model. Additionally, 16S rDNA sequencing was performed on rats faces to investigate whether the combination strategy improves the microbial dysbiosis in UUO rats.

RESULTS

The prepared DCS-Lips produced small, uniformly sized nanoparticles, and significantly enhanced the cellular uptake and in vitro permeability of EMO compared to non-coated liposomes. Moreover, the EMO-IGE was characterized by short gelation time, optimal gelling temperature, and excellent viscosity. In UUO model, the combination of DCS-Lips (gavage) and IGE (enema) attenuated renal fibrosis effectively. The results of 16S rDNA sequencing illustrated that IGE could restore the gut microbial dysbiosis of UUO rats.

CONCLUSION

Overall, the combination of DCS-Lips and EMO-IGE alleviated renal fibrosis effectively, resulting from the improved oral bioavailability of EMO by DCS-Lips and the restoration of gut microbiota by EMO-IGE, thus, presenting an innovative and promising potential for renal fibrosis treatment.

Poloxamer 407/188 Binary Thermosensitive Gel as a Moxidectin Delivery System: In Vitro Release and In Vivo Evaluation

Moxidectin (MXD) is an antiparasitic drug used extensively in veterinary clinics. In this study, to develop a new formulation of MXD, a thermosensitive gel of MXD (MXD-TG) was prepared based on poloxamer 407/188. Furthermore, the gelation temperature, the stability, in vitro release kinetics and in vivo pharmacokinetics of MXD-TG were evaluated. The results showed that the gelation temperature was approximately 27 °C. MXD-TG was physically stable and can be released continuously for more than 96 h in vitro. The Korsmeyer−Peppas model provided the best fit to the release kinetics, and the release mechanism followed a diffusive erosion style. MXD-TG was released persistently for over 70 days in sheep. Part of pharmacokinetic parameters had a difference in female and male sheep (p < 0.05). It was concluded that MXD-TG had a good stability, and its release followed the characteristics of a diffusive erosion style in vitro and a sustained release pattern in vivo.

Application of Sol–Gels for Treatment of Gynaecological Conditions—Physiological Perspectives and Emerging Concepts in Intravaginal Drug Delivery

Approaches for effective and sustained drug delivery to the female reproductive tract (FRT) for treating a range of gynaecological conditions remain limited. The development of versatile delivery platforms, such as soluble gels (sol–gels) coupled with applicators/devices, holds considerable therapeutic potential for gynaecological conditions. Sol–gel systems, which undergo solution-to-gel transition, triggered by physiological conditions such as changes in temperature, pH, or ion composition, offer advantages of both solution- and gel-based drug formulations. Furthermore, they have potential to be used as a suitable drug delivery vehicle for other novel drug formulations, including micro- and nano-particulate systems, enabling the delivery of drug molecules of diverse physicochemical character. We provide an anatomical and physiological perspective of the significant challenges and opportunities in attaining optimal drug delivery to the upper and lower FRT. Discussion then focuses on attributes of sol–gels that can vastly improve the treatment of gynaecological conditions. The review concludes by showcasing recent advances in vaginal formulation design, and proposes novel formulation strategies enabling the infusion of a wide range of therapeutics into sol–gels, paving the way for patient-friendly treatment regimens for acute and chronic FRT-related conditions such as bacterial/viral infection control (e.g., STDs), contraception, hormone replacement therapy (HRT), infertility, and cancer.

Intradermal injection of icariin-HP-β-cyclodextrin improved traumatic brain injury via the trigeminal epineurium-brain dura pathway

The lower bioavailability after oral administration limited icariin applications in Central Nervous System. Icariin/HP-β-cyclodextrin (HP-β-CD) inclusion complex was prepared for acute severe opening traumatic brain injury (TBI) via facial intradermal(i.d.) in mystacial pad. After fluid percussion-induced TBI, icariin/HP-β-CD at 0.4 mg/kg i.d. preserved more neurons and oligodendrocytes than intranasal injection (i.n.) or intravenous injection via tail vein (i.v.) and decreased microglia and astrocyte activation. Icariin/HP-β-CD i.d. reduced apoptosis in cortical penumbra while i.n. and i.v. showed weak or no effects. Icariin/HP-β-CD i.d. reduced Evans blue leakage and altered CD34, ZO-1, Claudin-5 and beta-catenin expression after TBI. Moreover, icariin/HP-β-CD promoted human umbilical vein endothelial cells proliferation. Thus, Icariin/HP-β-CD i.d. improved TBI, including blood brain barrier opening. Fluorescein 5-isothiocyanate (FITC) and 3,3'-Dioctadecyloxacarbocyanine perchlorate (DiOC18(3)) mimic HP-β-CD and icariin respectively. FITC and DiOC18(3) were similarly delivered to trigeminal epineurium, perineurium and perivascular spaces or tissues, caudal dura mater and scattered in trigeminal fasciculus, indicating that icariin/HP-β-CD was delivered to brain via trigeminal nerve-dura mater-brain pathways. In sum, intradermal injection in mystacial pad might delivered icariin/HP-β-CD to brain and icariin/HP-β-CD improved acute severe opening TBI.

Injectable thermosensitive lipo-hydrogels loaded with ropivacaine for prolonging local anesthesia

Reducing post-surgical pain can promote recovery of mobility, improve patient satisfaction, and reduce the risk of chronic pain syndrome. When managing post-surgical pain, single-injection local anesthesia is more convenient and involves lower risk to the patient than multi-injection regimes, but the effects are not long-lasting. Here we developed a system that can prolong local anesthesia after a single injection. In this system, ropivacaine (Ro) is encapsulated into liposomes, which are then loaded into Poloxamer 407-based thermosensitive hydrogels. The Ro-loaded liposome-in-gel system (Ro-Lip-Gel) is in a sol state before injection, and immediately after subcutaneous injection, it forms a gel in situ. We show through in vitro release and in vivo pharmacokinetics studies that this gel acts as a drug release depot. In rats, the initial burst release of Ro was smaller from Ro-Lip-Gel than from Ro solution or Ro-Gel, and Ro-Lip-Gel caused nerve blockade lasting four times longer than Ro solution. Ro-Lip-Gel degraded in vivo and showed good biocompatibility. Our results suggest that a liposome-in-gel system can show small initial burst release, long-term nerve blockade and good biocompatibility in vitro and in vivo. Therefore, such a system may be useful for sustained local anesthesia without systemic toxicity.

An Overview on Thermosensitive Oral Gel Based on Poloxamer 407

In this review, we describe the application of thermosensitive hydrogels composed of poloxamer in medicine, especially for oral cavities. Thermosensitive hydrogels remain fluid at room temperature; at body temperature, they become more viscous gels. In this manner, the gelling system can remain localized for considerable durations and control and prolong drug release. The chemical structure of the poloxamer triblock copolymer leads to an amphiphilic aqueous solution and an active surface. Moreover, the poloxamer can gel by forming micelles in an aqueous solution, depending on its critical micelle concentration and critical micelle temperature. Owing to its controlled-release effect, a thermosensitive gel based on poloxamer 407 (P407) is used to deliver drugs with different characteristics. As demonstrated in studies on poloxamer formulations, an increase in gelling viscosity decreases the drug release rate and gel dissolution time to the extent that it prolongs the drug’s duration of action in disease treatment. This property is used for drug delivery and different therapeutic applications. Its unique route of administration, for many oral diseases, is advantageous over traditional routes of administration, such as direct application and systemic treatment. In conclusion, thermosensitive gels based on poloxamers are suitable and have great potential for oral disease treatment.

Repurposing of nifedipine loaded in situ ophthalmic gel as a novel approach for glaucoma treatment

Glaucoma is a chronic eye disease characterized by elevated intraocular pressure (IOP) which causes severe complications to the eyes and may lead to vision loss. The effective treatment of such diseases motivated the search for novel and unique drugs and delivery systems. It has been reported that, nifedipine (NF) is effective in reducing the elevated IOP due to vasodilatation of eye vascular smooth muscles. NF loaded thermo-sensitive in situ gels were prepared by the cold method using poloxamer 407 (P407) and hydroxypropyl methyl cellulose (HPMC) polymers adopting Box-Behnken experimental design. All the prepared formulae were tested for homogeneity, clarity, pH, isotonicity, gelling capacity, rheological behavior, in vitro drug release and were tested in vivo on rabbits. The prepared in situ gels were homogenous, transparent, having a pH ranged from 5 to 5.5 and undergo sol-gel transition within few seconds physiological temperature. The in situ gels showed sustained in vitro release of NF where about 76% of the loaded drug was released over 12 h. NF loaded in situ gels showed a 45.83 ± 2.91% reduction in the IOP, with no sign of toxicity or irritation to the eye in rabbits. The current investigations clarified the efficiency of this novel and unique NF loaded in situ gel for the control of the IOP compared to the conventional ophthalmic dosage forms.

Recent Advances in Polymer-Based Vaginal Drug Delivery Systems

The vagina has been considered a potential drug administration route for centuries. Most of the currently marketed and investigated vaginal formulations are composed with the use of natural or synthetic polymers having different functions in the product. The vaginal route is usually investigated as an administration site for topically acting active ingredients; however, the anatomical and physiological features of the vagina make it suitable also for drug systemic absorption. In this review, the most important natural and synthetic polymers used in vaginal products are summarized and described, with special attention paid to the properties important in terms of vaginal application. Moreover, the current knowledge on the commonly applied and innovative dosage forms designed for vaginal administration was presented. The aim of this work was to highlight the most recent research directions and indicate challenges related to vaginal drug administrations. As revealed in the literature overview, intravaginal products still gain enormous scientific attention, and novel polymers and formulations are still explored. However, there are research areas that require more extensive studies in order to provide the safety of novel vaginal products.

Research progress in the application of in situ hydrogel system in tumor treatment

The in situ hydrogel drug delivery system is a hot research topic in recent years. Combining both properties of hydrogel and solution, in situ hydrogels can provide many advantages for drug delivery application, including easy application, high local drug concentration, prolonged drug retention time, reduced drug dose in vivo, good biocompatibility and improved patient compliance, thus has potential in tumor treatment. In this paper, the related literature reports in recent years were reviewed to summarize and discuss the research progress and development prospects in the application of in situ hydrogels in tumor treatment.

Novel glucosamine-loaded thermosensitive hydrogels based on poloxamers for osteoarthritis therapy by intra-articular injection

Glucosamine (GlcN) is a common drug used to treat osteoarthritis (OA). To prolong the action time of glucosamine on OA and improve its therapeutic effect, this research explored the potential application of GlcN-loaded thermosensitive hydrogels based on poloxamer 407 and poloxamer 188 for OA therapy by intra-articular injection. The thermosensitive hydrogels were prepared by cold method, and the effects of P407, P188, and GlcN on sol-gel transition temperature (T_sol-gel) were compared. After screening was performed, the optimized formulation showed good temperature sensitivity, and T_sol-gel was approximately 35 °C. In vitro release tests showed that GlcN was slowly released from the thermosensitive hydrogels. After the gels were intra-articularly administered to treat OA in rabbits, the degree of swelling and inflammatory factors were significantly decreased in the hydrogel group compared with those in the OA model group (P < 0.05). Histological results showed that the GlcN-administered group had a good repair effect on damaged cartilage. At the same dose, the effect of the thermosensitive hydrogels was better than that of the aqueous solution. Therefore, GlcN-loaded thermosensitive hydrogels based on poloxamers are promising sustainable delivery systems for OA therapy by intra-articular injection.

Intranasal delivery of icariin via a nanogel-thermoresponsive hydrogel compound system to improve its antidepressant-like activity

Although icariin has been reported to have antidepressant-like effects in different animal models, its poor oral bioavailability and low efficiency of delivery to the brain limit its application. In this study, icariin nanogels were prepared by reverse microemulsion methods to improve its poor water solubility. Then, we developed an icariin nanogel loaded self-assembled thermosensitive hydrogel system (icariin-NGSTH) to deliver icariin via a noninvasive, direct nose-to-brain delivery route for the treatment of depression. The in vivo distribution was investigated by fluorescence imaging with rhodamine B-labeled nanogels. The antidepressant efficacy of icariin-NGSTH was evaluated in behavioral despair tests and the chronic unpredictable mild stress (CUMS) model. The results showed that icariin-NGSTH had a zero-order kinetics release in the first 10 h. Icariin-NGSTH led to rapid brain distribution within 30 min. Icariin-NGSTH significantly reduced the duration of immobility in the tail suspension test (TST) and forced swim test (FST). Compared with oral administration, intranasally administered icariin-NGSTH had a fast-acting antidepressant effect in the TST and FST. Moreover, icariin-NGSTH increased body weight and sucrose preference, reversed abnormal plasma levels of testosterone, interleukin-6 (IL-6) and prostaglandin E₂ (PGE₂), and repaired neuronal damage in the hippocampi of CUMS rats. These results indicated that icariin-NGSTH at a low dose produced a significant antidepressant effect. As a complex drug delivery system, intranasally administered icariin-NGSTH is a rapid and effective treatment for depression, increasing the antidepressant-like activity of icariin.

Microparticles-in-Thermoresponsive/Bioadhesive Hydrogels as a Novel Integrated Platform for Effective Intra-articular Delivery of Triamcinolone Acetonide

Intra-articular (IA) injection of thermoresponsive hydrogels coupled with microparticles (MPs) possess the benefit of sustaining the anti-inflammatory drug effect within the joint cavity for rheumatoid arthritis treatment. Star-shaped thermoresponsive poly(polyethylene glycol) methacrylate [Poly(PEGMA)] copolymers were synthesized using free radical polymerization technique and fully characterized. Triamcinolone acetonide (TA)-loaded PLA/mPEG-PDL MPs, previously optimized, were integrated into the synthesized copolymer solutions at various concentrations and tested for their gelation temperatures. The MPs-in-hydrogel formulations were characterized using scanning electron microscope (SEM), viscosity measurements, ex vivo bioadhesion, and in vitro release studies. The anti-inflammatory effect of integrated systems was assessed in adjuvant-induced monoarthritic rat knee joints and compared to Kenacort and TA-loaded MPs. Two copolymers were successfully synthesized; G-1 = poly(PEGMA₁₈₈-ME-co-PEGMA₄₇₅-ME) and G-2 = poly(PEGMA₂₄₆-EE-co-PEGMA₄₇₅-ME). Using the tube inversion technique, the gel formation was found dependent on copolymer concentration. An irreversible aggregation was obtained at copolymer concentrations ≤10% (w/v), while a gel was formed at 20 and 30% (w/v) of both copolymers upon increasing temperature. The MP-hydrogel formulations were optimized at 20 and 30% (w/v) of G-1 and G-2 with gelation temperatures of 33 and 37 °C, respectively. SEM images revealed the porous microstructures of hydrogels and their adsorption on MP surfaces. The integrated formulas showed pseudoplastic behaviors, while the bioadhesion study confirmed their bioadhesiveness on excised cartilage. The in vitro release study confirmed drug sustainment from MPs-hydrogels compared to MPs. In vivo studies proved the superiority of MP-in-hydrogels in treatment of induced arthritis, relative to Kenacort and MPs alone, suggesting the applicability of this integrated platform in IA drug delivery.

Rutin-Loaded Poloxamer 407-Based Hydrogels for In Situ Administration: Stability Profiles and Rheological Properties

Rutin is a flavone glycoside contained in many plants, and exhibits antioxidant, anti-inflammatory, anticancer, and wound-healing properties. The main disadvantage related to the use of this molecule for pharmaceutical application is its poor bioavailability, due to its low solubility in aqueous media. Poloxamer 407-hydrogels show interesting thermo-sensitive properties that make them attractive candidates as pharmaceutical formulations. The hydrophobic domains in the chemical structure of the copolymer, a polymer made up of two or more monomer species, are useful for retaining poorly water-soluble compounds. In this investigation various poloxamer 407-based hydrogels containing rutin were developed and characterized as a function of the drug concentration. In detail, the Turbiscan stability index, the micro- and dynamic rheological profiles and in vitro drug release were investigated and discussed. Rutin (either as a free powder or solubilized in ethanol) did not modify the stability or the rheological properties of these poloxamer 407-based hydrogels. The drug leakage was constant and prolonged for up to 72 h. The formulations described are expected to represent suitable systems for the in situ application of the bioactive as a consequence of their peculiar versatility.

Formulation strategies to modulate drug release from poloxamer based in situ gelling systems

Introduction: Poloxamer based in situ gelling systems offer numerous advantages in drug delivery; however, their application as prolonged-release delivery platforms is limited mainly due to their weak mechanical properties and the interconnected aqueous network causing fast gel erosion and drug diffusion.Area covered: The focus of this review is to provide an insightful discussion on the formulation strategies that can be employed to sustain/prolong the drug release from poloxamer based in situ gelling systems. The review also outlines the formulation factors, influencing drug release from these systems.Expert opinion: The nature, composition, and concentration of poloxamers are the most critical factors in defining the rate of drug release from an in situ gelling matrix. Hydrophobic gel matrices have compact micellar arrangements resulting in slow diffusion and erosion. Depending on the intended clinical application, gel characteristics can be modulated, either by physical blending or by chemical crosslinking with additive materials, to slow release and improve residence time at the administration site. Incorporating drug-loaded particles into poloxamer gels sustains drug release by creating multiple rate-limiting release barriers. Chemical modification of poloxamers appears to be a promising strategy to obtain prolonged sustained release for parenteral application without compromising the rheological properties of the formulation.

Advances in Therapeutics and Delayed Drug Release

Reducing the frequency of drug administration in the treatment of exotic pets is advantageous because it may decrease handling frequency and thus potential stress and injury risk for the animal, increase owner compliance with the prescribed treatment, and decrease need for general anesthesia in patients that cannot be handled safely. Increasing efficient drug plasma concentration using sustained-released delivery systems is an appealing solution. Potential candidates that could provide a promising solution have been investigated in exotic pets. In this article, the technologies that are the closest to being integrated in exotic pet medicine are reviewed: osmotic pumps, nanoparticles, and hydrogels.

A Nasal Temperature and pH Dual-Responsive In Situ Gel Delivery System Based on Microemulsion of Huperzine A: Formulation, Evaluation, and In Vivo Pharmacokinetic Study

Huperzine A (hup A), extracted from the Chinese medicinal plant Huperzia serrata, is a reversible and highly selective second-generation acetylcholine esterase (AchE) inhibitor for treating Alzheimer's disease (AD), but it suffers from low bioavailability in the brain. This study aimed to develop a nasal temperature and pH dual-responsive in situ gel delivery system based on microemulsion of hup A (hup A-M-TPISG). The optimal formulation was obtained by central composite design and response surface methodology. The optimized mucoadhesive formulation, hup A-M-TPISG, was composed of pluronic F127 (20.80%), pluronic F68 (2.8%), and chitosan (0.88%) as the gel matrix, which could gelatinize under physiological conditions (29-34°C, pH 6.5) because of its temperature and pH responsiveness. The optimized hup A-M-TPISG formulation was further evaluated by in vitro release and in vivo pharmacokinetic studies via microdialysis. The in vitro release study showed continuous and steady drug release from hup A-M-TPISG, which was in accordance with the first-order model. Moreover, the pharmacokinetic results revealed that the optimized formulation for nasal administration, with convenient administration and improved patient compliance, could achieve similar brain-targeting properties as intravenous administration. In conclusion, the hup A-M-TPISG for intranasal administration, as an effective and safe vehicle, could enhance the absorption of hup A in vivo and would be a promising noninvasive alternative for partially improving brain-targeting therapy.

Buspirone Hydrochloride Loaded In Situ Nanovesicular Gel as an Anxiolytic Nasal Drug Delivery System: In Vitro and Animal Studies

Nasal nanovesicular gels of buspirone hydrochloride (BH) were prepared and characterized aiming for sustained delivery and enhancing bioavailability. Buspirone hydrochloride has low bioavailability of about 4% after oral administration due to first pass metabolism. Buspirone hydrochloride nanovesicles were formulated by thin film hydration method (TFH). The selected nanovesicular formulation was incorporated into two types of in situ gels (pH-induced and thermoreversible) using carbopol 974P and poloxamer 407 (P407), respectively, together with different mucoadhesive polymers. The in situ gels were examined for pH, gelling capability, viscosity, content uniformity, mucoadhesiveness, and in vitro drug release. The ex vivo permeation performance of the in situ gel formulations that showed the most sustained release was also assessed. The in vivo study was done by the determination of BH blood level in albino rabbits after nasal administration. Results revealed that nanovesicles prepared using Span 60 and cholesterol in a ratio of 80:20 showed the highest EE% (70.57 ± 1.00%). The ex vivo permeation data confirmed higher permeability figures for carbopol formulation in comparison to poloxamer formulations. The in vivo study data showed an increase of 3.26 times in BH bioavailability when formulated into the carbopol nanovesicular in situ gel relative to control (nasal drug solution).

Silver sulfadiazine nanosuspension-loaded thermosensitive hydrogel as a topical antibacterial agent

Background

Silver sulfadiazine (AgSD) is widely employed as an antibacterial agent for surface burn management. However, the antibacterial activity of AgSD was restrained because of the lower drug solubility and possible cytotoxicity.

Objective

This study aimed to formulate stable silver sulfadiazine/nanosuspensions (AgSD/NSs) with improved AgSD solubility and prepare a suitable carrier for AgSD/NS delivery. Nanotechnology was used to overcome the low drug dissolution rate of AgSD, while the new carrier loaded with AgSD/NS was assumed to decrease the possible cytotoxicity, enhance antibacterial activity, and promote wound healing.

Methods

AgSD/NSs were prepared by high pressure homogenization method. Poloxamer 407-based thermoresponsive hydrogels were prepared by cold method as carriers of AgSD/NS to obtain AgSD/NS-loaded thermoresponsive hydrogel. Scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) were used to measure the physicalchemical properties of AgSD/NSs and AgSD/NS-loaded gel. The cytotoxicity of the AgSD/NS-loaded gel was evaluated using methyl thiazolyltetrazolium assay with L929 mouse fibroblast cell lines. In vitro antibacterial activities of AgSD/NSs and AgSD/NS loaded gel were also measured.

Results

Stable AgSD/NSs with an average particle size of 369 nm were formulated while 1.5% P407 was selected as a stabilizer. The optimized AgSD/NS thermoresponsive hydrogel exhibited the gelation temperature of approximately 30°C. A significant improvement in solubility was observed for AgSD nanoparticles (96.7%) compared with AgSD coarse powders (12.5%). The results of FTIR and XRD revealed that the physicochemical properties of AgSD/NS were reserved after incorporating into the hydrogel. The cell viability after incubation with AgSD/NS-loaded thermoresponsive hydrogel improved from 60.7% to 90.6% compared with incubation with AgSD/NS directly. Drug release profiles from the thermoresponsive hydrogel increased compared with the commercial AgSD cream, implying less application frequency of AgSD cream clinically. In vitro antibacterial studies manifested that AgSD nanocrystallization significantly enhanced the antibacterial activity compared with the AgSD coarse powder.

Conclusion

The combination of AgSD nanosuspensions and thermoresponsive hydrogel effectively improved the AgSD antibacterial activity and decreased the cytotoxicity. This study also suggested that a poloxamer thermoresponsive hydrogel could be used as a delivery system for other nanocrystals to decrease possible nanotoxicity.

In-vivo anti-tumor activity of a novel poloxamer-based thermosensitive in situ gel for sustained delivery of norcantharidin

In order to develop a novel norcantharidin (NCTD) delivery system with slow drug release and specific targeting characteristics, we have developed a Poloxamer-based NCTD thermosensitive in situ gel. The evaluation of the characteristics of this system using both in vitro and in vivo methods was previously reported. However, its anti-tumor activity in vivo is still not confirmed. Thus, the potential anti-tumor activity and relative mechanism were investigated in a murine H22 hepatoma model. Tumor-bearing mice were treated with different dose of NCTD thermosensitive in situ gel (3.3 mg/kg, 6.6 mg/kg, and 9.9 mg/kg, respectively by intra-tumor injection once every three days, totaling 5 injections per group. Control groups included untreated or NCTD injection (2.2 mg/kg, qd) or blank in situ gel. The expression of vascular endothelial growth factor (VEGF) and CD44 in tumor tissue was examined by immunohistochemistry (IHC) staining. Treatment with middle or high dose of NCTD thermosensitive in situ gel significantly induced tumor regression, inhibited VEGF and CD44 expression and improved survival of tumor-bearing mice. The efficacy of NCTD thermosensitive in situ gel is higher than that of free NCTD injection. Therefore, NCTD thermosensitive in situ gel is a novel NCTD delivery approach for chemotherapeutic treatment of cancer.

Tolmetin sodium-loaded thermosensitive mucoadhesive liquid suppositories for rectal delivery; strategy to overcome oral delivery drawbacks

Tolmetin sodium (TS) is a nonsteroidal anti-inflammatory drug (NSAID) indicated for treatment of musculoskeletal issues. As other NSAID, TS displays a marked side effects on the gastro-intestinal (GI) tract after oral administration. Traditional solid suppositories can cause pain and discomfort for patients, may reach the end of the colon; consequently, the drug can undergo the first-pass effect. TS liquid suppository (TS-_LS) was developed to enhance patient compliance and rectal mucosal safety in high-risk patients receiving highly NSAID therapy. This work was conducted to optimize and evaluate Poloxamer P407/P188-based thermoresponsive TS-_LS by using mucoadhesive polymers such as methylcellulose (MC). TS-_LS was prepared by cold method and characterized their in vitro physicochemical properties as gelation temperature (GT), gel strength, bioadhesive properties, and in vitro release. The safety of the prepared suppository on rectum, stomach, and liver was evaluated histologically. Pharmacokinetic analyses were performed to compare rectal TS-_LS to orally Rhumtol^® capsules. The results showed that the optimized TS-_LS; composed of P407/P188/MC (21/9/0.5% w/w) displayed gelation at rectum temperature ∼32.90 °C, gel strength of 21.35 s and rectal retention force at the administration site of 24.25 × 10² dyne/cm². Moreover, TS-_LS did not cause any morphological damage to the rectal tissues. Pharmacokinetic parameters of optimized TS-_LS formulation revealed 4.6 fold increase in bioavailability as compared to Rhumtol^® capsules. Taken together, the results demonstrated that liquid suppository is a potential and physically safe rectal delivery carrier for improvement rectal bioavailability and in vivo safety of TS.

Nanosized soy phytosome-based thermogel as topical anti-obesity formulation: an approach for acceptable level of evidence of an effective novel herbal weight loss product

PURPOSE

Herbal supplements are currently available as a safer alternative to manage obesity, which has become a rising problem over the recent years. Many chemical drugs on the market are designed to prevent or manage obesity but high cost, low efficacy, and multiple side effects limit its use. Nano lipo-vesicles phytosomal thermogel of Soybean, Glycine max (L.) Merrill, was formulated and evaluated in an attempt to investigate its anti-obesity action on body weight gain, adipose tissue size, and lipid profile data.

METHODS

Three different techniques were used to prepare phytosome formulations including solvent evaporation, cosolvency, and salting out. The optimized phytosome formulation was then selected using Design Expert® (version 7.0.0) depending on the highest entrapment efficiency, minimum particle size (PS), and maximum drug release within 2 hours as responses for further evaluation. The successful phytosome complex formation was investigated by means of Fourier-transform infrared spec troscopy and determination of PS and zeta potential. Phytosome vesicles' shape was evaluated using transmission electron microscope to ensure its spherical shape. After characterization of the optimized phytosome formulation, it was incorporated into a thermogel formulation. The obtained phytosomal thermogel formulation was evaluated for its clarity, homogeneity, pH, and gel transformation temperature besides rheology behavior and permeation study. An in vivo study was done to investigate the anti-weight-gain effect of soy phytosomal ther mogel.

RESULTS

EE was found to be >99% for all formulations, PS ranging from 51.66-650.67 while drug release was found to be (77.61-99.78) in range. FTIR and TEM results confirmed the formation of phytosome complex. In vivo study showed a marked reduction in body weight, adipose tissue weight and lipid profile.

CONCLUSION

Concisely, soy phytosomal thermogel was found to have a local anti-obesity effect on the abdomen of experimental male albino rats with a slight systemic effect on the lipid profile data.

A mucoadhesive, thermoreversible in situ nasal gel of geniposide for neurodegenerative diseases

Neurodegenerative diseases are becoming prevalent as the population ages. Geniposide could inhibit oxidative stress, reduce apoptosis, protect neuron, and has been used for therapy of the neurodegenerative diseases. The bioavailability of geniposide by nasal route is greater than that by oral administration. However, mucociliary clearance is a rate-limiting factor for nasal route administration. The objective of this study was to develop and evaluate a mucoadhesive, thermoreversible in situ nasal gel of geniposide. The poloxamers (P407, P188) and the hydroxypropyl methylcellulose were used as thermoreversible and mucoadhesive polymers, respectively. Borneol was used as a permeation enhancer. The hydrogel was prepared with the cold method and optimized by the response surface methodology-central composite design. Gelation temperature, pH, clarity, gel strength, mucoadhesive strength, in vitro and ex vivo release kinetics of formulations were evaluated. The optimized amounts of poloxamer407 (P407), poloxamer188 (P188) and hydroxypropyl methylcellulose were determined to be 19.4-20.5%, 1.1-4.0% and 0.3-0.6% respectively. The second-order polynomial equation in terms of actual factors indicated a satisfactory correlation between the independent variables and the response (R2 = 0.9760). An ANOVA of the empirical second-order polynomial model indicated the model was significant (P<0.01). P407, P188, P407×P188, P4072 and P1882 were significant model terms. The effects of P407 on gelation temperature were greater than those of other independent variables. The pH values of all the formulations were found to be within 6.3-6.5 which was in the nasal physiological pH range 4.5-6.5. The drug content, gel strength, mucoadhesive strength of the optimized formulations were 97-101%, 25-50 sec and 4000-6000 dyn/cm2 respectively. The in vitro release kinetics of cumulative release of geniposide was fitted to the zero-order model. The ex vivo cumulative release kinetics of geniposide was fitted to the Weibull model. This study concludes that the release of geniposide is controlled by gel corrosion, and that the permeation of geniposide is time-dependent. The more residence time, mucoadhesive, thermoreversible in situ nasal gel of geniposide for neurodegenerative diseases is of compliance and potential application.

Smart micro/nanoparticles in stimulus-responsive drug/gene delivery systems

New achievements in the realm of nanoscience and innovative techniques of nanomedicine have moved micro/nanoparticles (MNPs) to the point of becoming actually useful for practical applications in the near future. Various differences between the extracellular and intracellular environments of cancerous and normal cells and the particular characteristics of tumors such as physicochemical properties, neovasculature, elasticity, surface electrical charge, and pH have motivated the design and fabrication of inventive "smart" MNPs for stimulus-responsive controlled drug release. These novel MNPs can be tailored to be responsive to pH variations, redox potential, enzymatic activation, thermal gradients, magnetic fields, light, and ultrasound (US), or can even be responsive to dual or multi-combinations of different stimuli. This unparalleled capability has increased their importance as site-specific controlled drug delivery systems (DDSs) and has encouraged their rapid development in recent years. An in-depth understanding of the underlying mechanisms of these DDS approaches is expected to further contribute to this groundbreaking field of nanomedicine. Smart nanocarriers in the form of MNPs that can be triggered by internal or external stimulus are summarized and discussed in the present review, including pH-sensitive peptides and polymers, redox-responsive micelles and nanogels, thermo- or magnetic-responsive nanoparticles (NPs), mechanical- or electrical-responsive MNPs, light or ultrasound-sensitive particles, and multi-responsive MNPs including dual stimuli-sensitive nanosheets of graphene. This review highlights the recent advances of smart MNPs categorized according to their activation stimulus (physical, chemical, or biological) and looks forward to future pharmaceutical applications.