Transdermal film-loaded finasteride microplates to enhance drug skin permeation: Two-step optimization study

Tioconazole-Loaded Transethosomal Gel Using Box-Behnken Design for Topical Applications: In Vitro, In Vivo, and Molecular Docking Approaches

Tioconazole (TCZ) is a broad-spectrum fungicidal BCS class II drug with reported activity against Candida albicans, dermatophytes, and certain Staphylococci bacteria. We report the use of TCZ-loaded transethosomes (TEs) to overcome the skin's barrier function. TCZ-loaded TEs were fabricated by using a cold method with slight modification. Box-Behnken composite design was utilized to investigate the effect of independent variables. The fabricated TEs were assessed with various physicochemical characterizations. The optimized formulation of TCZ-loaded TEs was incorporated into gel and evaluated for pH, conductivity, drug content, spreadability, rheology, in vitro permeation, ex vivo permeation, and in vitro and in vivo antifungal activity. The fabricated TCZ-loaded TEs had a % EE of 60.56 to 86.13, with particle sizes ranging from 219.1 to 757.1 nm. The SEM images showed spherically shaped vesicles. The % drug permeation was between 77.01 and 92.03. The kinetic analysis of all release profiles followed Higuchi's diffusion model. The FTIR, DSC, and XRD analysis showed no significant chemical interactions between the drug and excipients. A significantly higher antifungal activity was observed for TCZ-loaded transethosomal gel in comparison to the control. The in vivo antifungal study on albino rats indicated that TCZ-loaded transethosomal gel showed a comparable therapeutic effect in comparison to the market brand Canesten®. Molecular docking demonstrated that the TCZ in the TE composition was surrounded by hydrophobic excipients with increased overall hydrophobicity and better permeation. Therefore, TCZ in the form of transethosomal gel can serve as an effective drug delivery system, having the ability to penetrate the skin and overcome the stratum corneum barrier with improved efficacy.

Finasteride-loaded nano-lipidic carriers for follicular drug delivery: preformulation screening and Box-Behnken experimental design for optimization of variables

Finasteride (FIN), a 5-α reductase enzyme inhibitor is mainly used orally for the treatment of androgenic alopecia and benign prostate hyperplasia. The present study was undertaken for systematic optimization and assessment of the designed nanostructured lipid carriers (NLC) to enhance follicular delivery of FIN by topical administration. The NLCs were prepared by microemulsion method, by employing a 3³ Box-Behnken design and subsequently confirmed by ANOVA analysis. Compritol ATO-888 and Fenugreek oil were selected as the solid lipid and liquid lipid respectively for the fabrication of NLCs. The formulations were characterized for particle size, zeta potential, entrapment efficiency, storage stability and in vitro drug release profile. Morphological profile of the NLCs nanocarriers was studied by transmission electron microscopy (TEM). The Fourier Transform Infrared Spectroscopy (FT-IR) spectrum and differential scanning calorimetry (DSC) thermogram demonstrated that FIN entrapment within NLCs was devoid of chemical interaction with the components. The prepared NLCs had satisfactory particle dimensions, zeta potential and entrapment efficiency. The numerical optimization process indicated the optimal NLC composition with 3 mg of SPC, 6 mg lipid and 5 mg of drug. NLCs loaded with FIN had acceptable particle size at 379.8 nm, zeta potential of −37.1 mV and an entrapment efficiency of 84%. Transmission electron microscopy indicated the spherical morphology. In vitro release profile indicated a fast initial release and subsequently a prolonged release of FIN from the carrier for 24 h. The release kinetics data displayed a Higuchi diffusion release model with the best match R² value (0.848). Short-term stability tests conducted over 4 weeks at 6° and 25 °C demonstrated that the formulation could retain their initial properties during the test period.

Transdermal Glipizide Delivery System Based on Chitosan-Coated Deformable Liposomes: Development, Ex Vivo, and In Vivo Studies

The current study aimed to develop and evaluate a sustained-release transdermal Glipizide (GLP) film to overcome its oral administration problems. Chitosan (CS)-coated deformable liposomes (DLs) were utilized to enhance the drug transdermal delivery. The formulations were characterized in terms of particle size, zeta potential, entrapment efficiency (EE%), vesicle deformability, morphology, stability, and in vitro release. Transdermal films of chosen formulations were prepared by the solvent casting technique, and an ex vivo study throughout rat skin was also performed. Moreover, a pharmacokinetics (PK) study was carried out and blood glucose levels were estimated. All the liposomes were in the nanometer range and a high EE% was obtained from DLs compared to conventional liposomes (CL). The prepared formulations showed a high stability and the DLs exhibited a high deformability compared to CL. The in vitro release study confirmed the sustained release of GLP from both CL and DL and a more pronounced sustained release of GLP was detected after coating with CS. Moreover, GLP was shown to efficiently permeate through the rat skin from transdermal films by an ex vivo permeation test. The transdermal films showed a promising PK profile in the rat as compared with oral GLP. Most importantly, GLP-CS-DL1 demonstrated a higher hypoglycemic effect, confirming the possibility of systemic action by the local topical delivery of GLP.

Oleic acid-reinforced PEGylated polymethacrylate transdermal film with enhanced antidyslipidemic activity and bioavailability of atorvastatin: A mechanistic ex-vivo/in-vivo analysis

To enhance the poor bioavailability and extensive liver metabolism of atorvastatin calcium (ATC), we have developed an oleic acid-reinforced PEGylated polymethacrylate (OLA-PEG-E-RLPO) transdermal film as a convenient and alternative delivery system. The effect of varying levels of Eudragit RLPO, PEG 400, and oleic acid on the target product profile was optimized through Quality by Design (QbD) approach. The ATC-loaded OLA-PEG-E-RLPO transdermal films were evaluated in ex-vivo experiments using full thickness skin, utilizing Franz cell studies, and undergone in-vivo pharmacokinetics/pharmacodynamics (PK/PD) assessment, using poloxamer-induced dyslipidemic Sprague-Dawley rats. At 2 and 12 h, the optimized ATC films with a thickness of 0.79 mm showed permeation of 37.34% and 97.23% into the receptor compartment, respectively. Steady-state flux was 0.172 mg/cm²h, with 7.01 × 10^-4 cm/h permeability coefficient, and 0.713 × 10^-3 cm²/h diffusion coefficient. In-vivo PK results indicated that the absorption profiles (AUC_0-∞) of the optimized film in pre-treated group of animals were 8.6-fold and 2.8-fold greater than controls pre-treated with non-PEGylated non-oleic acid film and orally administered ATC, respectively. PD assessment of the lipid panel indicated that the lipid profile of the optimized film pre-treated group reached normal levels after 12 h, along with the significant enhancement over the non-PEGylated non-oleic acid film and the oral marketed tablet groups. The histopathological findings revealed near-normal hepatocyte structure for the optimized film pre-treated animal group. Our results further indicate that transdermal delivery films based on an optimized ATC-loaded OLA-PEG-E-RLPO were successfully developed and their assessment in both ex-vivo and in-vivo suggests enhanced permeability and improvement in bioavailability and antidyslipidemic activity of ATC. This approach can provide several advantages, especially during chronic administration of ATC, including improvement in patient compliance, therapeutic benefits, bioavailability, and feasibility for commercialization and as a platform for other drug classes.

Formulation optimization and characterization of transdermal film of curcumin by response surface methodology

Objective

India is referred as goldmine of herbal drugs but still lack of optimization of herbal drugs, which has kept us on the back foot. The rationale of the study is to prepare optimized transdermal drug delivery system of curcumin employing response surface methodology to study the collective effect of independent variables like concentration of ethyl cellulose, hydroxyl propyl methyl cellulose and dibutyl phthalate which significantly influenced characteristics like percentage elongation and in vitro drug release.

Method

Twenty formulations containing varying concentrations of polymers and permeation enhancer were prepared using solvent casting technique.

Result

The study revealed that the effect of dibutyl phthalate (DBP) concentration was the highest on percentage elongation (P < 0.0001), while hydroxy propyl methyl cellulose (HPMC) concentration exhibited pronounced effect on drug release (P < 0.0001) through dialysis membrane. Linear model fitted the best for curcumin release and elongation for all formulations. According to Derringer’s desirability prediction tool, the composition of optimized film was found to be 242.14% of HPMC, 109.59% of ethyl cellulose (EC), and 1.03% of DBP. Under these conditions, the optimized patch exhibited a predicted value of %elongation and in vitro drug release of 94.35% and 80.0306%, respectively, which was comparable to the actual values of percent elongation and in vitro drug release i.e. 95.02% and 81.03% respectively. FTIR and thermal studies were also performed which revealed no interaction or complexation between drug and excipients. The ex vivo study performed using rat skin showed that the cumulative drug release from the optimized patch showed flux of (30.68 ± 18) µg/cm²/h.

Conclusion

It can be concluded that in future if proper optimization of herbal formulations is carried out, they can become the first choice for patients as compare to synthetic drugs.

The Antifungal and Ocular Permeation of Ketoconazole from Ophthalmic Formulations Containing Trans-Ethosomes Nanoparticles

Ketoconazole (KET), a synthetic imidazole broad-spectrum antifungal agent, is characterized by its poor aqueous solubility and high molecular weight, which might hamper its corneal permeation. The aim was to develop an ophthalmic formulation loaded with optimized trans-ethosomal vesicles to enhance KET ocular permeation, antifungal activity, rapid drug drainage, and short elimination half-life. Four formulation factors affecting the vesicles' size, zeta potential, entrapment efficiency, and flexibility of the trans-ethosomes formulations were optimized. The optimum formulation was characterized, and their morphological and antifungal activity were studied. Different ophthalmic formulations loaded with the optimized vesicles were prepared and characterized. The ocular irritation and in vivo corneal permeation were investigated. Results revealed that the drug-to-phospholipid-molar ratio, the percentage of edge activator, the percentage of ethanol, and the percentage of stearyl amine significantly affect the characteristics of the vesicles. The optimized vesicles were spherical and showed an average size of 151.34 ± 8.73 nm, a zeta potential value of +34.82 ± 2.64 mV, an entrapment efficiency of 94.97 ± 5.41%, and flexibility of 95.44 ± 4.33%. The antifungal activity of KET was significantly improved following treatment with the optimized vesicles. The developed in situ gel formulations were found to be nonirritating to the cornea. The trans-ethosomes vesicles were able to penetrate deeper into the posterior eye segment without any toxic effects. Accordingly, the in situ developed gel formulation loaded with KET trans-ethosomes vesicles represents a promising ocular delivery system for the treatment of deep fungal eye infections.

Preparation and Evaluation of '3 Cap' Pulsatile Drug Delivery System of Ramipril

BACKGROUND

Chronotherapeutics, the drug delivery based on circadian rhythm, is recently gaining much attention worldwide. Various diseases like asthma, hypertension, and arthritis show the circadian variation that demands time scheduled drug release for effective drug action. Therefore, the pulsatile drug delivery system has been designed to confer preprogrammed drug delivery.

OBJECTIVE

In the present study, a '3 Cap' pulsatile drug delivery system has been developed, optimized, and characterized in order to achieve the floating and pulsatile release of ramipril.

METHODS

An optimal response surface design was employed to investigate the effect of isopropanol: formaldehyde vapors for varying time on drug release from the capsules. '3 Cap' pulsatile drug delivery system was evaluated in terms of floating time, density, the effect of gastric flow rate, and type of dissolution apparatus on drug release.

RESULTS

Independent variables exhibited a significant effect on the drug release of the prepared formulations. Results showed that time between the release of fractions of dose increased with an increase in formaldehyde: isopropanol ratio and duration of exposure to formaldehyde vapors with no effect of gastric flow rate.

CONCLUSION

The results of the designed system revealed that an optimum exposure of 1:2 of isopropanol: formaldehyde vapors for sixty minutes resulted in the desired release of second pulse of dose after a predetermined lag time of 5 hours as desired. '3Cap' system was successful in achieving floating and pulsed release of hypertensive drug opening a 'new lease of life' to the existing drug molecule.

Novel Herbal Topical Patch Containing Curcumin and Arnica montana for the Treatment of Osteoarthritis

BACKGROUND

Osteoarthritis (OA) ranks fifth among all forms of disability affecting 10% of the world population. Current treatments available are associated with multiple side effects and do not slow down the progression of the disease. Moreover, no such effective treatment is available to date in various systems of medicine to treat osteoarthritis. Curcumin and Arnica have shown evident clinical advances in the treatment of osteoarthritis.

OBJECTIVE

The aim of the present study was to design, optimize and characterize novel herbal transdermal patches of curcumin and Arnica montana using factorial design.

METHODS

A multiple factorial design was employed to investigate the effect of hydroxypropyl methyl cellulose, ethyl cellulose and jojoba oil on elongation and drug release. Transdermal patches were evaluated by FTIR, DSC, FESEM, ex vivo drug permeation, anti osteoarthritic activity and analgesic activity.

RESULTS

Independent variables exhibited a significant effect on the physicochemical properties of the prepared formulations. The higher values of drug release and elongation were observed with the higher concentration of hydroxypropyl methylcellulose and jojoba oil. Anti osteoarthritic activity was assessed by complete Freund's adjuvant arthritis model; using rats and analgesic activity by Eddy's hot plate method, using mice. Combination patch exhibited good anti osteoarthritic and analgesic activity as compare to individual drug patches.

CONCLUSION

The design results revealed that the combination patch exhibited good physicochemical, anti osteoarthritic and analgesic activity for the treatment of osteoarthritis in animals. More plants and their combinations should be explored to get reliable, safe and effective formulations that can compete with synthetic drugs.

Paper 2. Epigallocatechin Gallate and Tannic Acid Based Formulations of Finasteride for Dermal Administration and Chemoembolization

Finasteride is used to treat benign prostatic hyperplasia (BPH) and pattern hair loss (androgenetic alopecia or APA). The local administration of formulations with increased solubility and controlled release of finasteride are proposed using gallate-containing compositions within embolic microparticles or paste. Finasteride solubility in either epigallocatechin gallate (EGCG) or tannic acid (TA) solutions was assessed using HPLC. Poly(dl-lactide-co-glycolide) (PLGA) or poly(methylmethacrylate) (PMMA) microspheres (100-400 μm) containing finasteride and EGCG or TA were effectively manufactured. Embolic particles were loaded with finasteride/EGCG/TA. Dermal uptake of TA/EGCG/finasteride topical compositions was measured in pig skin. The solubility of finasteride was dramatically increased using EGCG- or TA-based compositions. Finasteride loaded microspheres released over two months which was increased by EGCG or TA inclusion. Embolic particles soaked up finasteride and EGCG or TA and released the encapsulated drug over two weeks. Dermal uptake of finasteride from EGCG- or TA-based formulations was enhanced between 10 and 50 fold in layers as deep as 500 μm when compared to a generic control formulation. Gallate-based formulations of finasteride increase drug solubility and allow for effective release of the drug from embolic formulations. Paste or powder EGCG- or TA-based formulations of finasteride greatly increase dermal penetration of the drug.

Enhancing the Hypolipidemic Effect of Simvastatin in Poloxamer-Induced Hyperlipidemic Rats via Liquisolid Approach: Pharmacokinetic and Pharmacodynamic Evaluation

This study aimed to enhance the dissolution of simvastatin (SMV) through its formulation in liquisolid tablets (LSTs) to improve its bioavailability and hypolipidemic activity after oral administration. SMV-LSTs were optimized using Box-Behnken design to maximize the rate and extent of SMV dissolution. The optimized SMV-LST was evaluated for pharmacokinetic parameters and potential hypolipidemic activity on induced hyperlipidemic rats. The dissolution parameters revealed a shortening of mean dissolution time from 10.99 to 6.82 min, increasing of dissolution rate during the first 10 min from 1253.15 to 1667.31 μg/min, and enhancing of dissolution efficiency after 60 min from 71.92 to 86.93% for SMV-LSTs versus the commercial SMV tablets. The obtained data reflected an improvement in the relative bioavailability of SMV with 148.232% which was confirmed by the significant reduction of the levels of circulating total cholesterol, triglycerides that reached the normal level after 12 h. In particular, the optimized SMV-LSTs reduced serum low-density lipoproteins (LDL) by 44.6% which was significantly different from the commercial SMV tablets. In contrast, the level of serum high-density lipoprotein (HDL) was significantly augmented after 4 h in rats treated with the optimized SMV-LSTs by 47.6%. Finally, the optimized SMV-LSTs showed a significant lower atherosclerotic index value which could maximize its potential in decreasing the risk of coronary disease and atherosclerosis. Overall enhancement in pharmacokinetics and pharmacodynamics in comparison with the commercial tablets confers the potential of the liquisolid approach as a promising alternative for improved oral bioavailability, hypolipidemic, and cardioprotective effects of SMV. Graphical abstract.

Enhancement of Simvastatin ex vivo Permeation from Mucoadhesive Buccal Films Loaded with Dual Drug Release Carriers

BACKGROUND

Simvastatin (SMV), a hypocholesterolemic agent, suffers from very low bioavailability due to its poor aqueous solubility and extensive first-pass metabolism.

METHODS

Two SMV carrier systems, namely, polymeric drug inclusion complex (IC) and mixed micelles (MM) nanoparticles, were developed and loaded into mucoadhesive buccal films to enhance SMV bioavailability. The two carrier systems were characterized and their permeation across human oral epithelial cells (OEC) was studied. The effect of IC to MM ratio (X1) and the mucoadhesive polymer concentration (X2) on the cumulative percent of drug released, elongation percent and the mucoadhesive strength, from the prepared mucoadhesive films, were optimized. Ex vivo permeation across bovine mucosal tissue was investigated. The permeation parameters for the in vitro and ex vivo release data were calculated.

RESULTS

Complexation of SMV with hydroxypropyl beta-cyclodextrin (HP β-CD) was superior to all other polymers as revealed by the equilibrium saturation solubility, stability constant, complexation efficiency and thermodynamic potential. SMV-HP β-CD IC was utilized to develop a saturated polymeric drug solution. Both carrier systems showed enhanced permeation across OEC when compared to pure drug. X1 and X2 were significantly affecting the characteristics of the prepared films. The optimized mucoadhesive buccal film formulation loaded with SMV IC and drug MM nanoparticles demonstrated superior ex vivo permeation when compared to the corresponding pure drug buccal film, and the calculated permeation parameters confirmed this finding.

CONCLUSION

Mucoadhesive buccal films containing SMV IC and drug MM can be used to improve drug bioavailability; however, additional pharmacokinetic and pharmacodynamic studies are required.

Two-Step Optimization to Develop a Transdermal Film Loaded With Dapoxetine Nanoparticles: A Promising Technique to Improve Drug Skin Permeation

Dapoxetine (DPX) is an orally administered drug for the treatment of premature ejaculation (PE). One of the challenges of administering DPX orally as a tablet is its poor bioavailability (ie, 42%) due to extensive first-pass metabolism. Thus, it is vital to develop a new formulation and mode of delivery to achieve the unmet needs of PE treatment. In this study, an optimized DPX polymeric nanoparticle (PNP) was developed and subsequently loaded into a transdermal film. The Box–Behnken design was utilized to optimize 3 formulation factors affecting the particle size and entrapment efficiency (EE) of chitosan (CS)-alginate (ALG) PNPs. A 3-level factorial design was used to study the effect of 2 variables affecting DPX cumulative percent released and percent elongation from transdermal films loaded with DPX-PNPs. Permeation parameters were calculated following ex vivo permeation study through rat skin. Transport of the PNPs across the skin layers was investigated using a fluorescence laser microscope. Results revealed that an optimized PNPs formulation was developed with a particle size 415.94 nm and EE 37.31%. Dapoxetine was successfully entrapped in the polymeric matrix. Chitosan and ALG interacted electrostatically with the studied cross-linking agents to form a polyelectrolyte complex. The ex vivo study illustrated a sustained release profile of DPX with enhanced skin permeation from the film loaded PNPs. Moreover, the PNPs was able to penetrate deeper into skin layers. Therefore, DPX transdermal film developed in this work could be considered as a successful drug delivery with better patient compliance for the treatment of PE.

Development and ex-vivo skin permeation studies of finasteride–poly(lactic acid-co-glycolic acid) and minoxidil–chitosan nanoparticulate systems

This study was designed to improve the permeability of two drugs (finasteride and minoxidil) through the skin. Finasteride-loaded poly(lactic acid- co-glycolic acid) and minoxidil-loaded chitosan nanoparticles were prepared by nanoprecipitation and ionic gelation method, respectively, and subsequently incorporated into semisolid Carbopol 940 gel. These fabricated nanoparticles were characterized for their pharmaceutical and chemical behavior. Nanoparticles were found a nearly spherical shape in the scanning electron microscopic studies and exhibited particle size in a range of 211–1012 nm. Finasteride- and minoxidil-loaded nanoparticles were optimized for relatively higher entrapment efficiency of 98% and 95%, respectively, by using the optimal concentration of polymers and stabilizers. All formulations were clear with smooth homogeneous texture and having pH values compatible with that of skin. This nanoparticulate system suspended in gel prolonged the release of drugs for up to 24 h and enhanced the drug permeability through the skin and retention of drug-loaded nanoparticles within the hair follicular routes. Therefore, these nanoparticles incorporated in the gel were found as a promising candidate for topical application in the treatment of alopecia by reducing the dosing frequency and adverse effects and as an effective strategy for improving the patient compliance toward therapy.

Development of finasteride/PHBV@polyvinyl alcohol/chitosan reservoir-type microspheres as a potential embolic agent: from in vitro evaluation to animal study

Benign prostatic hyperplasia (BPH) is a prevalent urological disease affecting elders. Currently, the prostatic artery embolization (PAE) is considered as a minimally invasive and safe technique to treat BPH. However, various drug-loaded embolic agents have not been thoroughly investigated in BPH therapy. In this study, finasteride/poly(3-hydroxybutyrate-3-hydroxyvalerate)@polyvinyl alcohol/chitosan (FNS/PHBV@PVA/CS) reservoir-type microspheres were prepared via the solid-in-water-in-oil (S/W/O) emulsion crosslinking method with the aim to reduce the burst effect and control localized drug delivery. The structure and properties of the drug and resultant microspheres were characterized via field emission scanning electron microscopy (FESEM), Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The results showed that the drug-loaded hybrid microspheres were well-dispersed and spherical with a mean diameter of 238.1 ± 27.3 μm. All samples exhibited excellent thermal stability. The FNS/PHBV microspheres were successfully encapsulated inside the PVA/CS polymeric matrix, which effectively suppressed the burst effect and prolonged the drug release up to 51 days. In vitro biocompatibility assessment indicated that the microspheres possessed excellent cytocompatibility and hemocompatibility. Furthermore, in vivo studies performed in the rabbit ear embolization model showed the formation of progressive ischemic necrosis after treatment for various periods. Histopathological studies revealed that the microspheres completely occluded the blood vessels with minimal foreign body response and formed the fibrotic area at the periphery of embolized arteries. Furthermore, the auricular vascular endothelial cells showed acute ultrastructural changes, associated with the ischemic necrosis induced by the embolization procedures. All these findings suggest that the FNS/PHBV@PVA/CS hybrid microspheres could be used as a promising drug delivery system for potential applications in BPH therapy.

Design and optimization of film-forming gel of etoricoxib using research surface methodology

The present investigation is focused on the development of transdermal film-forming gel (FFG) loaded with etoricoxib employing research surface methodology (RSM). Box-Behnken surface design method was used to develop experimental run using different concentrations of etoricoxib, hydroxypropyl methylcellulose (HPMC K100M), and eudragit RL100 as independent variables, and Derringer's optimization tool was employed to optimize best possible formulation. The dependent variables considered in this study were viscosity and drug permeation at 24 h (Q24, μg/cm²). Anti-inflammatory study was performed on Wistar albino rats for 8 h. Skin irritation studies and accelerated stability studies were performed for validated FFG formulations. Quadratic model was found to be best fit model (p < 0.0001) for both the responses. The influence of HPMC concentration on the viscosity was found to be highest whereas concentration of etoricoxib was maximum for Q24. The optimum composition of the FFG was observed to be 4% of etoricoxib, 1.1246% of HPMC, and 0.4% of eudragit. Above composition resulted in viscosity of 1549.5 mPa.s and maximum Q24 of 4639.11 μg/cm² with desirability 0.918. The in vivo anti-inflammatory study demonstrated better sustained release effect (for 8 h) of optimized FFG compared to orally administered drug suspension. An average irritation score of 0.555 was observed on Draize scoring system. The validated FFG formulation was found to be stable for the 3 months in accelerated conditions. It can be concluded from the above investigations that the validated FFG formulation of etoricoxib is well tolerated and could provide sustained drug release for 8 h. Graphical abstract.

Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application

This review describes some commercially available stimuli-responsive polymers of natural and synthetic origin, and their applications in drug delivery and textiles. The polymers of natural origin such as chitosan, cellulose, albumin, and gelatin are found to show both thermo-responsive and pH-responsive properties and these features of the biopolymers impart sensitivity to act differently under different temperatures and pH conditions. The stimuli-responsive characters of these natural polymers have been discussed in the review, and their respective applications in drug delivery and textile especially for textile-based transdermal therapy have been emphasized. Some practically important thermo-responsive polymers such as pluronic F127 (PF127) and poly(N-isopropylacrylamide) (pNIPAAm) of synthetic origin have been discussed in the review and they are of great importance commercially because of their in situ gel formation capacity. Some pH-responsive synthetic polymers have been discussed depending on their surface charge, and their drug delivery and textile applications have been discussed in this review. The selected stimuli-responsive polymers of synthetic origin are commercially available. Above all, the applications of bio-based or synthetic stimuli-responsive polymers in textile-based transdermal therapy are given special regard apart from their general drug delivery applications. A special insight has been given for stimuli-responsive hydrogel drug delivery systems for textile-based transdermal therapy, which is critical for the treatment of skin disease atopic dermatitis.

Controlled Release Film Forming Systems in Drug Delivery: The Potential for Efficient Drug Delivery

Despite many available approaches for transdermal drug delivery, patient compliance and drug targeting at the desired concentration are still concerns for effective therapies. Precise and efficient film-forming systems provide great potential for controlling drug delivery through the skin with the combined advantages of films and hydrogels. The associated disadvantages of both systems (films and hydrogels) will be overcome in film-forming systems. Different strategies have been designed to control drug release through the skin, including changes to film-forming polymers, plasticizers, additives or even model drugs in formulations. In the current review, we aim to discuss the recent advances in film-forming systems to provide the principles and review the methods of these systems as applied to controlled drug release. Advances in the design of film-forming systems open a new generation of these systems.

Formulation and clinical investigation of optimized vinpocetine lyoplant-tabs: new strategy in development of buccal solid dosage form

BACKGROUND

This work aimed to develop a new solid dosage formulation of vinpocetine (VPN) in the form of buccal freeze-dried pullulan-based tablets (lyoplant-tabs) loaded with physically modified drug binary system.

METHODS

Different polyvinyl pyrrolidone (PVP) grades were studied to prepare an efficient VPN binary system characterized by enhanced equilibrium saturation solubility, solubilization efficiency, thermodynamic stability, and permeation through oral mucosal cell lines. The concentrations of pullulan and swelling-aid polymer that affect the quality attributes of lyoplant-tabs were optimized. Clinical pharmacokinetics study on human volunteers for the optimized lyoplant-tabs compared to marketed product was accomplished.

RESULTS

A promising drug binary system with polyvinyl pyrrolidone vinyl acetate (PVP-VA64) utilizing the lyophilization technique was developed. Solid-state characterization confirmed transformation of VPN completely into the amorphous form. The concentrations of pullulan and swelling-aid polymer were significantly affecting the characteristics of the tablets. Compared to the commercial VPN tablets, pullulan-based buccal tablets demonstrated enhancement in the studied pharmacokinetic parameters with positive impact on the drug bioavailability.

CONCLUSION

These VPN lyoplant-tabs containing lyophilized PVP-VA64-VPN binary system can be considered as an alternative to currently available marketed tablets; however, further preclinical investigations using large number of volunteers are required.

Optimized vinpocetine-loaded vitamin E D-α-tocopherol polyethylene glycol 1000 succinate-alpha lipoic acid micelles as a potential transdermal drug delivery system: in vitro and ex vivo studies

Background

Vinpocetine (VNP), a semisynthetic natural product, is used as a vasodilator for cerebrovascular and age-related memory disorders. VNP suffers from low oral bioavailability owing to its low water solubility and extensive first-pass metabolism. This work aimed at utilizing D-α-tocopherol polyethylene glycol 1000 succinate (TPGS) and alpha lipoic acid (ALA) to develop efficient micellar system for transdermal delivery of VNP.

Materials and methods

VNP-TPGS-ALA micelles were prepared, characterized for particle size using particle size analyzer, and investigated for structure using transmission electron microscope. Optimization of VNP-TPGS-ALA micelles-loaded transdermal films was performed using Box–Behnken experimental design. The investigated factors were percentage of ALA in TPGS (X₁), citral concentration (X₂), and propylene glycol concentration (X₃). Elongation percent (Y₁), initial permeation after 2 hours (Y₂), and cumulative permeation after 24 hours (Y₃) were studied as responses.

Results

Statistical analysis revealed optimum levels of 16.62%, 3%, and 2.18% for X₁, X₂, and X₃, respectively. Fluorescent laser microscopic visualization of skin penetration of the optimized transdermal film revealed marked widespread fluorescence intensity in skin tissue after 0.5, 2, and 4 hours compared with raw VNP transdermal film formulation, which indicated enhancement of VNP skin penetration.

Conclusion

The obtained results highlighted the potentiality of VNP nanostructure-based films for controlling the transdermal permeation of the drug and improving its effectiveness.

Effect of finasteride particle size reduction on its pharmacokinetic, tissue distribution and cellular permeation

Finasteride (FSD), a specific competitive inhibitor of the steroid type-II 5α-reductase enzyme, is used in treatment of benign prostate hyperplasia (BPH) and male pattern baldness. The drug is of limited solubility that affect its dissolution and bioavailability. The aim was to study the effect of FSD particle size reduction on the pharmacokinetic, tissue distribution and cellular permeation. An optimized drug micro- and nano-particles were developed, characterized, administered to group of rats, and systemic pharmacokinetic and tissue distribution within target and not-target organs were determined using near-infrared (NIR) spectroscopy technique. Moreover, the cellular permeation of the prepared formulations through normal prostate epithelial cells was assessed and compared to pure FSD. The developed micro- and nano-particles were of 930 and 645 nm, respectively. Plasma maximum drug levels (C_max) and overall exposure (AUC) of both formulations were not significantly higher than unformulated drug. However, micronized FSD achieved significant higher concentration within the target tissue (prostate) within the current study compared to pure drug and nano-sized formulation as well. Yet, this is explained by the higher sequestration ability of spleen tissue to the nano-sized formula compared to micro-sized FSD. At the cellular level, permeation of nano-sized FSD through prostate epithelial cells was superior to the unformulated FSD as well as the micro-sized drug formulation. FSD particle size reduction significantly influences its cellular permeation and to a lesser extend affect its systemic pharmacokinetics and tissue distribution after oral administration.

Development of optimized self-nanoemulsifying lyophilized tablets (SNELTs) to improve finasteride clinical pharmacokinetic behavior

OBJECTIVE

Preparation of an optimized finasteride (FSD) lyophilized tablets loaded with self-nanoemulsifying drug delivery system (SNEDDS).

SIGNIFICANCE

Enhance FSD bioavailability in male pattern baldness and benign prostatic hyperplasia.

METHODS

Two-step optimization was implemented to achieve the study goals. First; the mixture design was used to develop an optimized SNEDDS through which the effect of cosurfactant number of carbon atoms on SNEDDS particle size and thermodynamic stability has been tested. Second; the different tablet excipients have been used to develop an optimized self-nanoemulsifying lyophilized tablets (SNELTs). The prepared tablets have been fully characterized. Interaction among tablet components has been studied. Finally, FSD clinical pharmacokinetic has been investigated on human volunteers.

RESULTS

Anise oil and tween 80 were selected as oily phase and surfactant, respectively while different aliphatic alcohols were studied as cosurfactants. Percentages of oil, surfactant, and cosurfactants were significantly affecting SNEDDS particle size. Increasing cosurfactant number of carbon atoms achieved smaller particle size and higher stability. The optimized SNEDDS was found to contain 10.3455, 45.8972, and 43.7573% of anise oil, tween 80, and butanol, respectively. Variations in FSD cumulative release and disintegration time, from the prepared tablets, were attributed to change in the percent of plasdone XL, Avicel and silica. No interaction among components was noticed. Clinical pharmacokinetics illustrated significant enhancement in the studied parameters from the optimized lyophilized tablets loaded with drug SNEDDS when compared to marketed FSD product.

CONCLUSION

Lyophilized tablets could be considered as a good alternative for conventional solid dosage forms especially when loaded with drug nanosystems.

A potential in situ gel formulation loaded with novel fabricated poly(lactide-co-glycolide) nanoparticles for enhancing and sustaining the ophthalmic delivery of ketoconazole

Oral ketoconazole therapy is commonly associated with serious hepatotoxicity. Improving ocular drug delivery could be sufficient to treat eye fungal infections. The purpose of this study was to develop optimized ketoconazole poly(lactide-co-glycolide) nanoparticles (NPs) with subsequent loading into in situ gel (ISG) formulation for ophthalmic drug delivery. Three formulation factors were optimized for their effect on particle size (Y1) and entrapment efficiency (Y2) utilizing central composite experimental design. Interaction among components was studied using differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy. Ketoconazole crystalline state was studied using X-ray powder diffraction. Six different polymeric ISG formulations were prepared and loaded with either optimized NPs or a pure drug. The prepared ISG formulations were characterized for in vitro gelation, drug release and antifungal activity. The permeation through human epithelial cell line was also investigated. The results revealed that all the studied formulation parameters significantly affected Y1 and Y2 of the developed NPs. DSC and FTIR studies illustrated compatibility among NP components, while there was a change from the crystalline state to the amorphous state of the NPs. The in vitro release from the ISG formulations loaded with drug NPs showed sustained and enhanced drug release compared to pure drug formulations. In addition, ISG loaded with NPs showed enhanced anti-fungal activity compared to pure drug formulations. Alginate–chitosan ISG formulation loaded with optimized ketoconazole NPs illustrated higher drug permeation through epithelial cell lines and is considered as an effective ophthalmic drug delivery in the treatment of fungal eye infections.