In vitro biopharmaceutical evaluation of ciprofloxacin/metal cation complexes for pulmonary administration

Hyaluronic acid modified nanocarriers for aerosolized delivery of verteporfin in the treatment of acute lung injury

Verteporfin (VER), a photosensitizer used in macular degeneration therapy, has shown promise in controlling macrophage polarization and alleviating inflammation in acute lung injury (ALI)/acute respiratory distress syndrome (ARDS). However, its hydrophobicity, limited bioavailability, and side effects hinder its therapeutic potential. In this study, we aimed to enhance the therapeutic potential of VER through pulmonary nebulized drug delivery for ALI/ARDS treatment. We combined hydrophilic hyaluronic acid (HA) with an oil-in-water system containing a poly(lactic acid-co-glycolic acid) (PLGA) copolymer of VER to synthesize HA@PLGA-VER (PHV) nanoparticles with favorable surface characteristics to improve the bioavailability and targeting ability of VER. PHV possesses suitable electrical properties, a narrow size distribution (approximately 200 nm), and favorable stability. In vitro and in vivo studies demonstrated the excellent biocompatibility, safety, and anti-inflammatory responses of the PHV by suppressing M1 macrophage polarization while inducing M2 polarization. The in vivo experiments indicated that the treatment with aerosolized nano-VER (PHV) allowed more drugs to accumulate and penetrate into the lungs, improved the pulmonary function and attenuated lung injury, and mortality of ALI mice, achieving improved therapeutic outcomes. These findings highlight the potential of PHV as a promising delivery system via nebulization for enhancing the therapeutic effects of VER in ALI/ARDS.

Development and characterization of a spray-dried inhalable ternary combination for the treatment of Pseudomonas aeruginosa biofilm infection in cystic fibrosis

Cystic fibrosis (CF) is an inherited lung disease characterised by the accumulation of thick layers of dried mucus in the lungs which serve as a nidus for chronic infection. Pseudomonas aeruginosa is the predominant cause of chronic lung infection in cystic fibrosis. The dense mucus coupled with biofilm formation hinder antibiotic penetration and prevent them from reaching their target. Mucoactive agents are recommended in the treatment of CF in combination with antibiotics. In spite of the extensive research in developing novel drug combinations for the treatment of lung infection in CF, to our knowledge, there is no study that combines antibiotic, antibiofilm and mucoactive agent in a single inhaled dry powder formulation. In the present study, we investigate the possibility of adding a mucoactive agent to our previously developed ciprofloxacinquercetin (antibiotic-antibiofilm) dry powder for inhalation. Three mucoactive agents, namely mannitol (MAN), N-acetyl-L-cysteine (NAC) and ambroxol hydrochloride (AMB), were investigated for this purpose. The ternary combinations were prepared via spray drying without the addition of excipients. All ternary combinations conserved or improved the antibacterial and biofilm inhibition activities of ciprofloxacin against P. aeruginosa (ATCC 10145). The addition of AMB resulted in an amorphous ternary combination (SD-CQA) with superior physical stability as indicated by DSC and nonambient XRPD. Furthermore, SD-CQA displayed better in vitro aerosolization performance (ED ∼ 71 %; FPF ∼ 49 %) compared to formulations containing MAN and NAC (ED ∼ 64 % and 44 %; FPF ∼ 44 % and 29 %, respectively). In conclusion, a ternary drug combination powder with suitable aerosolization, physical stability and antibacterial/antibiofilm properties was prepared by a single spray drying step.

PK-PD Evaluation of Inhaled Microparticles loaded with Ciprofloxacin-Copper complex in a Rat Model of Chronic Pseudomonas aeruginosa Lung Infection

The potential gain in efficacy of pulmonary administration over IV administration of some antibiotics such as ciprofloxacin (CIP) may be limited by the short residence time of the drug at the site of infection after nebulization. Complexation of CIP with copper reduced its apparent permeability in vitro through a Calu-3 cell monolayer and greatly increased its pulmonary residence time after aerosolisation in healthy rats. Chronic P. aeruginosa lung infections in cystic fibrosis patients result in airway and alveolar inflammation that may increase the permeability of inhaled antibiotics and alter their fate in the lung after inhalation compared to what was seen in healthy conditions. The objective of this study was to compare the pharmacokinetics and efficacy of CIP-Cu²⁺ complex-loaded microparticles administered by pulmonary route with a CIP solution administered by IV to model rats with chronic lung infection. After a single pulmonary administration of microparticles loaded with CIP-Cu²⁺ complex, pulmonary exposure to CIP was increased 2077-fold compared to IV administration of CIP solution. This single lung administration significantly reduced the lung burden of P. aeruginosa expressed as CFU/lung measured 24 h after administration by 10-fold while IV administration of the same dose of CIP was ineffective compared to the untreated control. This better efficacy of inhaled microparticles loaded with CIP-Cu²⁺ complex compared with CIP solution can be attributed to the higher pulmonary exposure to CIP obtained with inhaled CIP-Cu²⁺ complex-loaded microparticles than that obtained with IV solution.

Levofloxacin in nanostructured lipid carriers: Preformulation and critical process parameters for a highly incorporated formulation

The first step of a successful nanoformulation development is preformulation studies, in which the best excipients, drug-excipient compatibility and interactions can be identified. During the formulation, the critical process parameters and their impact must be studied to establish the stable system with a high drug entrapment efficiency (EE). This work followed these steps to develop nanostructured lipid carriers (NLCs) to deliver the antibiotic levofloxacin (LV). The preformulation studies covered drug solubility in excipients and thorough characterization using thermal analysis, X-ray diffraction and spectroscopy. A design of experiment based on the process parameters identified nanoparticles with < 200 nm in size, polydispersity <= 0.3, zeta potential -21 to -24 mV, high EE formulations (>71 %) and an acceptable level of LV degradation products (0.37-1.13 %). To the best of our knowledge, this is the first time that a drug degradation is reported and studied in work on nanostructured lipids. LV impurities following the NLC production were detected, mainly levofloxacin N-oxide, a degradation product that has no antimicrobial activity and could interfere with LV quantification in spectrophotometric experiments. Also, the achievement of the highest EE in lipid nanoparticles than those described in the literature to date and the apparent protective action of NLC of entrapped-LV against degradation are important findings.

Understanding the suitability of established antibiotics for oral inhalation from a pharmacokinetic perspective: an integrated model-based investigation based on rifampicin, ciprofloxacin and tigecycline in vivo data

BACKGROUND

Treating pulmonary infections by administering drugs via oral inhalation represents an attractive alternative to usual routes of administration. However, the local concentrations after inhalation are typically not known and the presumed benefits are derived from experiences with drugs specifically optimized for inhaled administration.

OBJECTIVES

A physiologically based pharmacokinetic/pharmacodynamic (PBPK/PD) model was developed to elucidate the pulmonary PK for ciprofloxacin, rifampicin and tigecycline and link it to bacterial PK/PD models. An exemplary sensitivity analysis was performed to potentially guide drug optimization regarding local efficacy for inhaled antibiotics.

METHODS

Detailed pulmonary tissue, endothelial lining fluid and systemic in vivo drug concentration-time profiles were simultaneously measured for all drugs in rats after intravenous infusion. Using this data, a PBPK/PD model was developed, translated to humans and adapted for inhalation. Simulations were performed comparing potential benefits of oral inhalation for treating bronchial infections, covering intracellular pathogens and bacteria residing in the bronchial epithelial lining fluid.

RESULTS

The PBPK/PD model was able to describe pulmonary PK in rats. Often applied optimization parameters for orally inhaled drugs (e.g. high systemic clearance and low oral bioavailability) showed little influence on efficacy and instead mainly increased pulmonary selectivity. Instead, low permeability, a high epithelial efflux ratio and a pronounced post-antibiotic effect represented the most impactful parameters to suggest a benefit of inhalation over systemic administration for locally acting antibiotics.

CONCLUSIONS

The present work might help to develop antibiotics for oral inhalation providing high pulmonary concentrations and fast onset of exposure coupled with lower systemic drug concentrations.

Oxytetracycline induced the redox of iron and promoted the oxidation of As(III)

Antibiotics and arsenic are two frequently detected contaminants in soils and waters, both of which have potential threats to human health. There are few studies focusing on the interaction between these two groups of contaminants in the environment. In this study, we found that the presence of oxytetracycline could significantly promote the oxidation of inorganic As(III) to As(V) with trace Fe(III) (10 μM) and H₂O₂ (100 μM) at near natural pH, and OTC was degraded simultaneously. The most possible mechanism was that OTC could complex with Fe(III) and reduce Fe(III) to Fe(II), which further induced the Fenton-like reaction. Furthermore, structural Fe(III) of α-FeOOH and adsorbed Fe(III) of montmorillonite could also induce these reactions, and the oxidation rate of As(III) was higher with Fe(III)-montmorillonite than aqueous Fe(III). Based on this study, the transformation of As(III) and OTC could occur in four natural water samples, including river water, groundwater and livestock wastewaters. The results of this study revealed the overlooked effect of residual tetracyclines antibiotics on the transformation of co-existing As(III) in natural waters and soils, which might greatly reduce the toxicity of As(III) in the environment.

An Overview on the Recent Advances in the Treatment of Infected Wounds: Antibacterial Wound Dressings

A wound can be surgical, cuts from an operation or due to accident and trauma. The infected wound, as a result of bacteria growth within the damaged skin, interrupts the natural wound healing process and significantly impacts the quality of life. Wound dressing is an important segment of the skincare industry with its economic burden estimated at $ 20.4 billion (in 2021) in the global market. The results of recent clinical trials suggest that the use of modern dressings can be the easiest, most accessible, and most cost-effective way to treat chronic wounds and, hence, holds significant promise. With the sheer number of dressings in the market, the selection of correct dressing is confusing for clinicians and healthcare workers. The aim of this research was to review widely used types of antibacterial wound dressings, as well as emerging products, for their efficiency and mode of action. In this review, we focus on introducing antibiotics and antibacterial nanoparticles as two important and clinically widely used categories of antibacterial agents. The perspectives and challenges for paving the way for future research in this field are also discussed. This article is protected by copyright. All rights reserved.

Developing ciprofloxacin dry powder for inhalation: A story of challenges and rational design in the treatment of cystic fibrosis lung infection

Cystic fibrosis (CF) is an inherited multisystem disease affecting the lung which leads to a progressive decline in lung function as a result of malfunctioning mucociliary clearance and subsequent chronic bacterial infections. Pseudomonas aeruginosa is the predominant cause of lung infection in CF patients and is associated with significant morbidity and mortality. Thus, antibiotic therapy remains the cornerstone of the treatment of CF. Pulmonary delivery of antibiotics for lung infections significantly reduces the required dose and the associated systemic side effects while improving therapeutic outcomes. Ciprofloxacin is one of the most widely used antibiotics against P. aeruginosa and the most effective fluoroquinolone. However, in spite of the substantial amount of research aimed at developing ciprofloxacin powder for inhalation, none of these formulations has been commercialized. Here, we present an integrated view of the diverse challenges associated with delivering ciprofloxacin dry particles to the lungs of CF patients and the rationales behind recent formulations of ciprofloxacin dry powder for inhalation. This review will discuss the challenges in developing ciprofloxacin powder for inhalation along with the physiological and pathophysiological challenges such as ciprofloxacin lung permeability, overproduction of viscous mucus and bacterial biofilms. The review will also discuss the current and emerging particle engineering approaches to overcoming these challenges. By doing so, we believe the review will help the reader to understand the current limitations in developing an inhalable ciprofloxacin powder and explore new opportunities of rational design strategies.

Pharmaceutical strategies to extend pulmonary exposure of inhaled medicines

Pulmonary administration route has been extensively exploited for the treatment of local lung diseases such as asthma, chronic obstructive pulmonary diseases and respiratory infections, and systemic diseases such as diabetes. Most inhaled medicines could be cleared rapidly from the lungs and their therapeutic effects are transit. The inhaled medicines with extended pulmonary exposure may not only improve the patient compliance by reducing the frequency of drug administration, but also enhance the clinical benefits to the patients with improved therapeutic outcomes. This article systematically reviews the physical and chemical strategies to extend the pulmonary exposure of the inhaled medicines. It starts with an introduction of various physiological and pathophysiological barriers for designing inhaled medicines with extended lung exposure, which is followed by recent advances in various strategies to overcome these barriers. Finally, the applications of the inhaled medicines with extended lung exposure for the treatment of various diseases and the safety concerns associated to various strategies to extend the pulmonary exposure of the inhaled medicines are summarized.

Characterization of Ciprofloxacin-Bismuth-Loaded Antibacterial Wound Dressing

The research was focused on developing a potentially antibacterial wound dressing made of polyurethane foam and loaded with bismuth-ciprofloxacin (Cip-Bi). The Cip-Bi chemical structure was confirmed by Fourier transform infrared spectroscopic (FTIR) analysis. The sought after antibacterial wound dressing was obtained by modification of the raw dressing with an iodine or bromine solution and subsequently with a Cip-Bi hydrogel. The amount of Cip-Bi loaded into the dressing matrix was determined indirectly on the basis of the differences in Cip-Bi concentrations, before and after the modification process, and the determination was performed with the HPLC (high-performance liquid chromatography) method. The modified dressing was found to have a two-step release of Cip-Bi, a feature helpful in the treatment of locally infected wounds and prevention of secondary bacterial infection. The zone of inhibition test against the selected Gram-positive and Gram-negative bacteria confirmed the antibacterial activity of the Cip-Bi-modified dressing. Preliminary tests conducted so far have been indicative of the Cip-Bi dressing's relatively high activity against the tested organisms.

A simple and sensitive HPLC-MS/MS assay for the quantitation of montelukast in cell-based systems in vitro pulmonary drug permeability study

Montelukast is a potent and selective antagonist of the cysteinyl leukotriene receptor 1 subtype (CysLT1) and widely used in the form of oral tablets and granules for asthma prophylaxis and treatment. Recently, due to the pulmonary inhaled administration can limit montelukast distribution in the systemic circulation, avoid the first-pass metabolism and have better therapeutic effects in respiratory disease treatment, explore alternative routes of administration, like delivery of montelukast via an inhaled, is a new research trend for montelukast. The aim of the current study was to develop and validate a simple, accurate, highly sensitive and selective liquid chromatography-tandem mass spectrometry method (LC-MS/MS) for determination of montelukast in an in vitro cell-based pulmonary pharmacokinetics system model, which can be used to be a better understanding the fate of inhaled montelukast in the lungs. In this study, montelukast was extracted by protein precipitation with acetonitrile containing labeled montelukast. The chromatography was performed on an Agilent Eclipse plus C8 column (4.6 mm × 100 mm, 3.5 μm, Darmstadt, Germany) operating at 35 ◦C. The mobile phase consisted of acetonitrile: 20 mM ammonium formate buffer (80: 20, v/v), was delivered at a flow rate of 0.5 mL/min. montelukast and the internal standard were both eluted at 4.2 min. A linear (1/x²) relationship was used to perform the calibration over an analytical range from 0.5 to 600 ng/mL. The intra- and inter-batch precision expressed as CV for four QC samples including LLOQ range from 1.14 % to 6.25 %. The intra- and inter-batch accuracy for four concentrations of montelukast were in the range of 95.19%-104.1%. All the values for accuracy and precision were within the acceptance range. The method met all the bioanalytical method validation requirements by ICH and was suitable for the assay of montelukast which in the in vitro cell-based pulmonary pharmacokinetics system model.

Contemporary Formulation Development for Inhaled Pharmaceuticals

Pulmonary delivery has gained increased interests over the past few decades. For respiratory conditions, targeted drug delivery directly to the site of action can achieve a high local concentration for efficacy with reduced systemic exposure and adverse effects. For systemic conditions, the unique physiology of the lung evolutionarily designed for rapid gaseous exchange presents an entry route for systemic drug delivery. Although the development of inhaled formulations has come a long way over the last few decades, many aspects of it remain to be elucidated. In particular, a reliable and well-understood method for in vitro-in vivo correlations remains to be established. With the rapid and ongoing advancement of technology, there is much potential to better utilise computational methods including different types of modelling and simulation approaches to support inhaled formulation development. This review intends to provide an introduction on some fundamental concepts in pulmonary drug delivery and inhaled formulation development followed by discussions on some challenges and opportunities in the translation of inhaled pharmaceuticals from preclinical studies to clinical development. The review concludes with some recent advancements in modelling and simulation approaches that could play an increasingly important role in modern formulation development of inhaled pharmaceuticals.

Optimization of inhalable liposomal powder formulations and evaluation of their in vitro drug delivery behavior in Calu-3 human lung epithelial cells

Inhalation therapy has advantages for the treatment of multidrug resistant bacterial lung infections with high drug concentrations at the infection sites in the airways and reduced systemic exposure. We have developed liposomal formulations for pulmonary delivery of synergistic ciprofloxacin (Cipro) and colistin (Col) as the potential candidate for treatment of lung infections caused by multidrug resistant Gram-negative bacteria. This study aims to: (1) further optimize the powder formulation by adding drying stabilizers (polyvinyl pyrrolidone or poloxamer) to protect the liposomes during spray-freeze-drying; (2) evaluate the transport and cellular uptake of drugs in a human lung epithelial Calu-3 cell model. The liposomal powder formulations were produced using the ultrasonic spray-freeze-drying technique. The optimal formulation (F5) used mannitol (8% w/v) and sucrose (2% w/v) as the internal lyoprotectants. Adding external lyoprotectants/aerosolization enhancers (i.e. 8% w/v mannitol, 2% w/v sucrose and 1%, w/w PVP 10) produced the superior rehydrated EE values of ciprofloxacin and colistin (50.2 ± 0.9% for Cipro and 37.8 ± 1.2% for Col) as well as satisfactory aerosol performance (FPF: 34.2 ± 0.8% for Cipro and 33.6 ± 0.9% for Col). The cytotoxicity study indicated that F5 with the colistin concentration at 50 μg/mL and ciprofloxacin at 200 μg/mL was not cytotoxic to human lung epithelial Calu-3 cells. The intracellular uptake of ciprofloxacin was concentration-dependent in Calu-3 cells and the uptake of A-B was more than that of B-A for all samples (p < 0.05). This study demonstrates that co-delivery of ciprofloxacin and colistin in a single liposome can lower the transport capability of both drugs across the Calu-3 cell monolayer and their accumulation in the cells. These findings indicate that co-loaded liposomal powder of ciprofloxacin and colistin is a promising potential treatment for respiratory infections caused by multidrug resistant Gram-negative bacteria.

In vivo efficacy of a dry powder formulation of ciprofloxacin-copper complex in a chronic lung infection model of bioluminescent Pseudomonas aeruginosa

A significant limitation of locally delivered treatments for chronic pulmonary infections is often the short residence time within the airways. Ciprofloxacin (CIP), for example, undergoes rapid absorption from the airway lumen. Previously, we demonstrated that the complexation of CIP with copper (CIP-Cu) reduces its apparent epithelial permeability and pulmonary absorption rate without affecting antimicrobial activity against Pseudomonas aeruginosa grown planktonically or as biofilms. This study aimed to evaluate the in vivo efficacy of CIP-Cu, prepared as a dry powder, in a chronic lung infection model. The powders were prepared by jet milling (CIP-HCl) and by spray drying (CIP-Cu). A bioluminescent strain of P. aeruginosa (PAO1::p16Slux) was used to prepare bacteria-loaded agar beads that were inoculated intratracheally to rats. The dynamics of the infection were monitored using luminometry. The bacteria/beads ratio was optimized to allow the highest luminescence signal and animal survival for 8 days. The efficacy of the treatment was evaluated by luminometry in addition to the end-point (Day 8) where colony counting was performed after lung harvesting. Luminescent P. aeruginosa entrapped in agar beads were useful to monitor the spatial development of the chronic lung infection in rats. The rats were treated with the dry powders in a nose-only inhalation exposure system (NOIES). CIP-Cu and CIP-HCl powders showed similar aerodynamic properties and comparable CIP lung deposition. However, treatment with CIP-Cu significantly (p < 0.01) reduced by 4-log the number of CFU of P. aeruginosa per lung in the chronic infection model, whereas CIP-HCl effect was not different from the untreated control group.

Control of the Lung Residence Time of Highly Permeable Molecules after Nebulization: Example of the Fluoroquinolones

Pulmonary drug delivery is a promising strategy to treat lung infectious disease as it allows for a high local drug concentration and low systemic side effects. This is particularly true for low-permeability drugs, such as tobramycin or colistin, that penetrate the lung at a low rate after systemic administration and greatly benefit from lung administration in terms of the local drug concentration. However, for relatively high-permeable drugs, such as fluoroquinolones (FQs), the rate of absorption is so high that the pulmonary administration has no therapeutic advantage compared to systemic or oral administration. Formulation strategies have thus been developed to decrease the absorption rate and increase FQs’ residence time in the lung after inhalation. In the present review, some of these strategies, which generally consist of either decreasing the lung epithelium permeability or decreasing the release rate of FQs into the epithelial lining fluid after lung deposition, are presented in regards to their clinical aspects.

Inhalable liposomal powder formulations for co-delivery of synergistic ciprofloxacin and colistin against multi-drug resistant gram-negative lung infections

The aim of this study was to design and characterize dry powder inhaler formulations of ciprofloxacin and colistin co-loaded liposomes prepared by the ultrasonic spray-freeze-drying (USFD) technique. Liposomal formulations and powder production parameters were optimized to achieve optimal characteristics and in-vitro performance such as encapsulation efficiency (EE), particle size, particle distribution index (PDI), fine particle fraction (FPF), emitted dose (ED) and in vitro antibacterial activity. The formulation (F6) with the mannitol (5% w/v) as the internal lyoprotectant and sucrose (5%, w/v), mannitol (10%, w/v) and leucine (5%, w/w) as the external lyoprotectants/aerosolization enhancers showed an optimal rehydrated EE values of ciprofloxacin and colistin (44.9 ± 0.9% and 47.0 ± 0.6%, respectively) as well as satisfactory aerosol performance (FPF: 45.8 ± 2.2% and 43.6 ± 1.6%, respectively; ED: 97.0 ± 0.5% and 95.0 ± 0.6%, respectively). For the blank liposomes, there was almost no inhibitory effect on the cell proliferation in human lung epithelial A549 cells, showing that the lipid materials used in the liposome formulation is safe for use in pulmonary drug delivery. The cytotoxicity study demonstrated that the optimized liposomal formulation (F6) was not cytotoxic at least at the drug concentrations of colistin 5 μg/mL and ciprofloxacin 20 μg/mL. Colistin (2 mg/L) monotherapy showed no antibacterial effect against P. aeruginosa H131300444 and H133880624. Ciprofloxacin (8 mg/L) monotherapy showed moderate bacterial killing for both clinical isolates; however, regrowth was observed in 6 h for P. aeruginosa H133880624. The liposomal formulation displayed superior antibacterial activity against clinical isolates of Pseudomonas aeruginosa H131300444 and P. aeruginosa H133880624 compared to each antibiotic per se. These results demonstrate that the liposomal powder formulation prepared by USFD could potentially be a pulmonary delivery system for antibiotic combination to treat multi-drug resistant Gram-negative lung infections.

Evaluation of co-delivery of colistin and ciprofloxacin in liposomes using an in vitro human lung epithelial cell model

Respiratory tract infections caused by multidrug-resistant Gram-negative bacteria are serious burdens to the public. Our previous findings indicated that co-loading of colistin and ciprofloxacin via liposomes improved in vitro antimicrobial activities against multidrug resistant Pseudomonas aeruginosa as compared to the monotherapies. The current study aims to investigate the transport behavior of colistin and ciprofloxacin in liposomes using the in vitro Calu-3 cell monolayer, which is a lung epithelial model cultured under the air-interfaced condition. The cell viability results demonstrated that there was no obvious toxicity of cells exposed to single or co-administered drugs at the concentration ≤500 μg/mL. Transport of ciprofloxacin into the cells was easier than that of colistin, which reached a plateau rapidly. Colistin was less trapped in the mucus or adhered to the apical cell membrane, and less transported across the cell monolayer than ciprofloxacin. The deposition of ciprofloxacin on the apical side increased over time (from 1 to 4 h). There was no drug-drug interaction observed during the transport of ciprofloxacin and colistin across the cell monolayer, when they were dosed together in the solution form. The amount of drug transported across the cell monolayer was decreased in both agents when loaded in liposomes. Both drugs were more trapped in the mucus or more adhered to the apical side cell membrane of the cell monolayer when they were in liposomes. This study demonstrated that co-delivery of colistin and ciprofloxacin in a single liposome can reduce transport capacity of both drugs across the lung epithelial cell monolayer and enhance drug retention on the lung epithelial surfaces; therefore, it is a promising approach to treat the respiratory infections caused by multidrug resistant Pseudomonas aeruginosa.

Efficacy of Ciprofloxacin and Its Copper Complex against Pseudomonas aeruginosa Biofilms

A limitation of antibiotic treatments for P. aeruginosa (PA) chronic pulmonary infections is the reduced efficacy due to sub-therapeutic concentrations at the infection site and the development of biofilm. A novel approach to sustain ciprofloxacin (CIP) in the lungs after inhalation is to reduce its pulmonary absorption rate by its complexation with copper (CIP-Cu). This study aimed to evaluate the antimicrobial action of cationic CIP-Cu complex in PA biofilms in terms of drug concentration and time. Two PA strains, PA01 and PA14, were grown to form biofilm layers in equilibrium with planktonic cells. Static parameters such as pyoverdine production by planktonic cells, enzymatic activity within biofilms, and biofilm biomass 24 h after the addition of CIP or CIP-Cu were evaluated. Also, the kinetic effects of CIP and CIP-Cu on biofilms were evaluated by bioluminescence kinetics using transgenic strains. No differences were observed between CIP and CIP-Cu in terms of efficacy against biofilms, validating the potential of using this complex to treat PA biofilms. Interestingly, CIP concentrations slightly below the MIC value against planktonic bacteria stimulated both virulence and biofilm PA01 production. These results support the need to accurately achieve high CIP concentration in the lungs, which can be more easily achieved by pulmonary delivery of advanced CIP formulations (CIP-metal complexes or liposomal CIP) instead of the oral administration of free CIP.

Use of leucine to improve aerodynamic properties of ciprofloxacin-loaded maltose microparticles for inhalation

Ciprofloxacin (CIP) apparent permeability and absorption rate across the pulmonary epithelium can be controlled by its complexation with copper (II) ion. The aim of the current study was to formulate CIP-Cu-loaded microparticles comprising three main excipients, calcium carbonate, maltose and L-leucine, and to process by spray drying so as to generate particles with suitable aerodynamic properties for pulmonary delivery using a dry powder inhaler. Different maltose:calcium carbonate ratios were used to prepare microparticles, and the role of the excipients on the particles’ physicochemical properties, stability, and aerosolization characteristics were investigated. All the formulations without L-leucine were fully X-ray amorphous. In the presence of L-leucine, diffraction peaks of low intensity were observed, which were attributed to the crystallization of the L-leucine at the particle surfaces. The addition of L-leucine modified the particle morphology and reduced the median geometric and aerodynamic diameters to 3.2 and 3.4 µm, respectively. The fine particle fraction of powder emitted from a Handihaler® device was increased up to 65.4%, predicting high total lung deposition. Stability studies showed that the powder X-ray diffraction pattern did not change over 21 months of storage in desiccated conditions, suggesting a good physical stability of the optimized formulation comprised of CIP-Cu, maltose and L-Leucine.

Highly efficient detection of ciprofloxacin in water using a nitrogen-doped carbon electrode fabricated through plasma modification

We developed a novel electrochemical sensor based on nitrogen plasma modification to effectively detect ciprofloxacin in water.

A new therapeutic avenue for bronchiectasis: Dry powder inhaler of ciprofloxacin nanoplex exhibits superior ex vivo mucus permeability and antibacterial efficacy to its native ciprofloxacin counterpart

Non-cystic fibrosis bronchiectasis (NCFB) characterized by permanent bronchial dilatation and recurrent infections has been clinically managed by long-term intermittent inhaled antibiotic therapy among other treatments. Herein we investigated dry powder inhaler (DPI) formulation of ciprofloxacin (CIP) nanoplex with mannitol/lactose as the excipient for NCFB therapy. The DPI of CIP nanoplex was evaluated against DPI of native CIP in terms of their (1) dissolution characteristics in artificial sputum medium, (2) ex vivo mucus permeability in sputum from NCFB and healthy individuals, (3) antibacterial efficacy in the presence of sputum against clinical Pseudomonas aeruginosa strains (planktonic and biofilm), and (4) cytotoxicity towards human lung epithelial cells. Despite their similarly fast dissolution rates in sputum, the DPI of CIP nanoplex exhibited superior mucus permeability to the native CIP (5-7 times higher) attributed to its built-in ability to generate highly supersaturated CIP concentration in the sputum. The superior mucus permeability led to the CIP nanoplex's higher antibacterial efficacy (>3 log₁₀ CFU/mL). The DPI of CIP nanoplex exhibited similar cytotoxicity towards the lung epithelial cells as the native CIP indicating its low risk of toxicity. These results established the promising potential of DPI of CIP nanoplex as a new therapeutic avenue for NCFB.

New aerosol formulation to control ciprofloxacin pulmonary concentration

Ciprofloxacin (CIP) apparent permeability across a pulmonary epithelium model can be controlled by the affinity of its complex with a metal cation. The higher the complex affinity, the larger is the reduction in CIP apparent permeability. The aim of this study was to evaluate if the control of the CIP apparent permeability observed in vitro could be transposed in vivo to control the CIP lung-to-blood absorption rate and CIP concentrations in the lung epithelial lining fluid (ELF) after intratracheal (IT) administration. Two types of innovative inhalable microparticles loaded with the low-affinity CIP-calcium complex (CIP-Ca) or with the high-affinity CIP-copper complex (CIP-Cu) were formulated and characterized. Then, ELF and plasma pharmacokinetics of CIP were studied in rats after IT administration of these two types of microparticles and of a CIP solution (2.5mg/kg). The presence of Cu²⁺ had little effect on the microparticle properties and the dry powder had aerodynamic properties which allowed it to reach the lungs. CIP concentrations in ELF were much higher after CIP-Cu microparticles IT administration compared to the other two formulations, with mean AUC_ELF to AUC_u,plasma ratios equal to 1069, 203 and 9.8 after CIP-Cu microparticles, CIP-Ca microparticles and CIP solution pulmonary administration, respectively. No significant modification of lung toxicity markers was found (lactate dehydrogenase and total protein). CIP complexation with Cu²⁺ seems to be an interesting approach to obtain high CIP concentrations in the ELF of lungs after dry powder IT administration.

Comparison of plasma pharmacokinetics of Tanreqing solution between intratracheal aerosolization and intravenous injection in rats

A rapid ultra high performance liquid chromatography tandem mass spectrometry method was developed for the simultaneous analysis of baicalin, oroxylin A-7-O-β-d-glucoronide and chlorogenic acid in rats plasma, and applied to comparison of pharmacokinetics of Tanreqing solution between intratracheal aerosolization and intravenous injection. Results of the analytical method validation assay showed high sensitivity, accuracy and suitable recovery. Results of pharmacokinetics showed similar decline phases for baicalin, oroxylin A-7-O-β-d-glucoronide and chlorogenic acid in two different delivery routes. The half-lives of intratracheal aerosolization and intravenous injection were 0.90 and 1.22 h for baicalin, 0.47 and 0.17 h for oroxylin A-7-O-β-d-glucoronide and 0.22 and 0.13 h for chlorogenic acid, and this implies that compounds were retained in the lung for a relatively short time. This study was the first to provide important pharmacokinetics information for traditional Chinese medicine delivery to the lung.