Exploration of supersaturable lacidipine ternary amorphous solid dispersion for enhanced dissolution and in vivo absorption

Spectroscopic characterization and pharmacokinetic evaluation of amorphous solid dispersions of glibenclamide for bioavailability enhancement in Wistar rats

Oral bioavailability of glibenclamide (Glb) was appreciably improved by the formation of an amorphous solid dispersion with Poloxamer-188 (P-188). Poloxamer-188 substantially enhanced the solubility and thereby the dissolution rate of the biopharmaceutics classification system (BCS) class II drug Glb and simultaneously exhibited a better stabilizing effect of the amorphous solid dispersion prepared by the solvent evaporation method. The physical state of the dispersed Glb in the polymeric matrix was characterized by differential scanning calorimetry, X-ray diffraction, scanning electron microscope and Fourier transform infrared studies. In vitro drug release in buffer (pH 7.2) revealed that the amorphous solid dispersion at a Glb-P-188 ratio of 1:6 (SDE4) improved the dissolution of Glb by 90% within 3 h. A pharmacokinetic study of the solid dispersion formulation SDE4 in Wistar rats showed that the oral bioavailability of the drug was greatly increased as compared with the market tablet formulation, Daonil®. The formulation SDE4 resulted in an AUC0-24h ~2-fold higher. The SDE4 formulation was found to be stable during the study period of 6 months.

Fabrication, optimization, and evaluation of lyophilized lacidipine-loaded fatty-based nanovesicles as orally fast disintegrating sponge delivery system

Lacidipine (LCD) is a potent antihypertensive agent. Fatty-based nanovesicles (FNVs) were designed to improve LCD low solubility and bioavailability. LCD-FNVs were formulated according to different proportions of cetyl alcohol, cremophor®RH40, and oleic acid adopting Box-Behnken Design. The optimized LCD-FNVs, composed of cetyl alcohol 48.4 mg, cremophor®RH40 120 mg, and oleic acid 40 mg, showed minimum vesicle size (124.8 nm), maximum entrapment efficiency % (91.04 %) and zeta potential (-36.3 mV). The optimized FNVs were then used to formulate the lyophilized orally fast-disintegrating sponge (LY-OFDS). The LY-OFDS had a very short disintegration time (58 sec), remarkably high % drug release (100 % after 15 mins), and increased the drug transbuccal permeation by over 9.5-fold compared to the drug suspension. In-vivo evaluation of antihypertensive activity in rats showed that the LY-OFDS reduced blood pressure immediately after 5 min and reached normal blood pressure 4.5-fold faster than the marketed oral tablets. In the In-vivo pharmacokinetic study in rabbits, the LY-OFDS showed 4.7-fold higher bioavailability compared with the marketed oral tablet. In conclusion, the LY-OFDS loaded with LCD-FNVs is a safe, and non-invasive approach that can deliver LCD effectively to the blood circulation via the buccal mucosa giving superior immediate capabilities of lowering high blood pressure and increasing the drug bioavailability.

Bentonite as a water-insoluble amorphous solid dispersion matrix for enhancing oral bioavailability of poorly water-soluble drugs

Bentonite (BT), an orally administrable natural clay, is widely used for medical and pharmaceutical purposes due to its unique properties, including swelling, adsorption and ion-exchange. However, its application as a matrix of amorphous solid dispersion (ASD) formulations is rarely reported, despite the fact that drugs can adsorb to BT in an amorphous state. The objective of this study was to explore the feasibility of BT as a water-insoluble ASD matrix for enhancing the oral bioavailability of poorly water-soluble drugs, including sorafenib (SF). We prepared a novel BT-based ASD of an SF-BT composite (SFBTC) by adsorbing SF onto BT under acidic conditions using the ionic interaction between cationic SF and negatively charged BT. Scanning electron microscopy (SEM), powder X-ray diffractometry (pXRD), and differential scanning calorimetry (DSC) analyses revealed that SF adsorbed to BT in an amorphous state at SF:BT ratios from 1:3 to 1:10. In pharmacokinetic studies in rats, SFBTC (1:3) significantly improved the oral bioavailability of SF, and the AUClast of SFBTC (1:3) was 3.3-fold higher than that of NEXAVAR®, a commercial product of SF. An in vitro release study under sink conditions revealed that SFBTC (1:3) completely released SF in a pH-dependent manner, while a nonsink condition study indicated the generation of supersaturation under intestinal pH conditions. A kinetic solubility study showed that the release of SFBTC (1:3) followed the diffusion-controlled mechanism, which is a typical characteristic of water-insoluble matrix-based ASDs. The pharmacokinetic studies of drug-BT composites of various drugs belonging to BCS class II indicated that the pKa value of the adsorbed drugs is one of the most important factors determining their dissolution and oral bioavailability. These results suggest that BT could be a promising water-insoluble ASD matrix for improving the oral bioavailability of poorly water-soluble drugs, including SF.

Preformulation study for the selection of a suitable polymer for the development of ellagic acid-based solid dispersion using hot-melt extrusion

Ellagic acid is one of the most studied polyphenolic compounds due to its numerous promising therapeutic properties. However, this therapeutic potential remains difficult to exploit owing to its low solubility and low permeability, resulting in low oral bioavailability. In order to allow an effective therapeutic application of EA, it is therefore necessary to develop strategies that sufficiently enhance its solubility, dissolution rate and bioavailability. For this purpose, solid dispersions based on pre-selected polymers such as Eudragit® EPO, Soluplus® and Kollidon® VA 64, with 5% w/w ellagic acid loading were prepared by hot extrusion and characterized by X-ray diffraction, FTIR spectroscopy and in vitro dissolution tests in order to select the most suitable polymer for future investigations. The results showed that Eudragit® EPO was the most promising polymer for ellagic acid solid dispersions development because its extrudates allowed to obtain a solution supersaturated in ellagic acid that was stable for at least 90 min. Moreover, the resulting apparent solubility was 20 times higher than the actual solubility of ellagic acid. The extrudates also showed a high dissolution rate of ellagic acid (96.25% in 15 min), compared to the corresponding physical mixture (6.52% in 15 min) or the pure drug (1.56% in 15 min). Furthermore, increasing the loading rate of ellagic acid up to 12% in extrudates based on this polymer did not negatively influence its release profile through dissolution tests.

Fed- and Fasted-State Performance of Pretomanid Amorphous Solid Dispersions Formulated with an Enteric Polymer

Weakly acid polymers with pH-responsive solubility are being used with increasing frequency in amorphous solid dispersion (ASD) formulations of drugs with low aqueous solubility. However, drug release and crystallization in a pH environment where the polymer is insoluble are not well understood. The aim of the current study was to develop ASD formulations optimized for release and supersaturation longevity of a rapidly crystallizing drug, pretomanid (PTM), and to evaluate a subset of these formulations in vivo. Following screening of several polymers for their ability to inhibit crystallization, hypromellose acetate succinate HF grade (HPMCAS-HF; HF) was selected to prepare PTM ASDs. In vitro release studies were conducted in simulated fasted- and fed-state media. Drug crystallization in ASDs following exposure to dissolution media was evaluated by powder X-ray diffraction, scanning electron microscopy, and polarized light microscopy. In vivo oral pharmacokinetic evaluation was conducted in male cynomolgus monkeys (n = 4) given 30 mg PTM under both fasted and fed conditions in a crossover design. Three HPMCAS-based ASDs of PTM were selected for fasted-state animal studies based on their in vitro release performance. Enhanced bioavailability was observed for each of these formulations relative to the reference product that contained crystalline drug. The 20% drug loading PTM-HF ASD gave the best performance in the fasted state, with subsequent dosing in the fed state. Interestingly, while food improved drug absorption of the crystalline reference product, the exposure of the ASD formulation was negatively impacted. The failure of the HPMCAS-HF ASD to enhance absorption in the fed state was hypothesized to result from poor release in the reduced pH intestinal environment resulting from the fed state. In vitro experiments confirmed a reduced release rate under lower pH conditions, which was attributed to reduced polymer solubility and an enhanced crystallization tendency of the drug. These findings emphasize the limitations of in vitro assessment of ASD performance using standardized media conditions. Future studies are needed for improved understanding of food effects on ASD release and how this variability can be captured by in vitro testing methodologies for better prediction of in vivo outcomes, in particular for ASDs formulated with enteric polymers.

Supersaturation and phase behavior during dissolution of amorphous solid dispersions

Amorphous solid dispersion (ASD) is a promising strategy to enhance solubility and bioavailability of poorly water-soluble drugs. Due to higher free energy of ASD, supersaturated drug solution could be generated during dissolution. When amorphous solubility of a drug is exceeded, drug-rich nanodroplets could form and act as a reservoir to maintain the maximum free drug concentration in solution, facilitating the absorption of the drug in vivo. Dissolution behavior of ASD has received increasing interests. This review will focus on the recent advances in ASD dissolution, including the generation and maintenance of supersaturated drug solution in absence or presence of liquid-liquid phase separation. Mechanism of drug release from ASD including polymer-controlled dissolution and drug-controlled dissolution will be introduced. Formation of amorphous drug-rich nanodroplets during dissolution and the underlying mechanism will be discussed. Phase separation morphology of hydrated ASD plays a critical role in dissolution behavior of ASD, which will be highlighted. Supersaturated drug solution shows poor physical stability and tends to crystallize. The effect of polymer and surfactant on supersaturated drug solution will be demonstrated and some unexpected results will be shown. Physicochemical properties of drug and polymer could impact ASD dissolution and some of them even show opposite effect on dissolution and physical stability of ASD in solid state, respectively. This review will contribute to a better understanding of ASD dissolution and facilitate a rational design of ASD formulation.

Enteric Polymer-Based Amorphous Solid Dispersions Enhance Oral Absorption of the Weakly Basic Drug Nintedanib via Stabilization of Supersaturation

The pH−induced crystallization of weakly basic drugs in the small intestine limits oral bioavailability. In this study, we investigated the solubilization and inhibitory effects on nintedanib in the presence of enteric polymers (HPMCAS LG, HPMCAS MG, Eudragit L100 55, and Eudragit L100). These polymers provided maintenance of supersaturation by increasing the solubility of nintedanib in PBS 6.8 in a concentration-dependent manner, and the improved ranking was as follows: Eudragit L100 > Eudragit L100 55 > HPMCAS MG > HPMCAS LG. After being formulated into amorphous solid dispersions (ASDs) by a solvent evaporation method, the drug exhibited an amorphous state. The pH shift dissolution results of polymer-ASDs demonstrated that four polymers could effectively maintain the drug supersaturation even at the lowest ratio of nintedanib and polymer (1:1, w/w). Eudragit L100−ASD could provide both acid resistance and the favorable mitigation of crystallization in GIF. In comparison to the coarse drug, the relative bioavailability of Eudragit L100−ASD was 245% after oral administration in rats, and Tmax was markedly delayed from 2.8 ± 0.4 h to 5.3 ± 2.7 h. Our findings indicate that enteric ASDs are an effective strategy to increase the intestinal absorption of nintedanib by improving physiologically generated supersaturation and subsequent crystallization.

Supersaturation-Based Drug Delivery Systems: Strategy for Bioavailability Enhancement of Poorly Water-Soluble Drugs

At present, the majority of APIs synthesized today remain challenging tasks for formulation development. Many technologies are being utilized or explored for enhancing solubility, such as chemical modification, novel drug delivery systems (microemulsions, nanoparticles, liposomes, etc.), salt formation, and many more. One promising avenue attaining attention presently is supersaturated drug delivery systems. When exposed to gastrointestinal fluids, drug concentration exceeds equilibrium solubility and a supersaturation state is maintained long enough to be absorbed, enhancing bioavailability. In this review, the latest developments in supersaturated drug delivery systems are addressed in depth.

Cellulose derivatives as effective recrystallization inhibitor for ternary ritonavir solid dispersions: In vitro-in vivo evaluation

Amorphous solid dispersions (ASDs) are regarded as one of the most promising techniques for poorly-soluble active pharmaceutical ingredients (API). However, the thermodynamic instability of ASDs at supersaturated state makes them easy to recrystallize in aqueous media. In this study, ritonavir (RTV) was selected as a model drug for evaluating the solubility enhancement and recrystallization inhibition effect of various cellulose derivatives and the combinations of them with typical surfactants. Combination of HPMCAS-HF/SLS was filtrated for preparing ternary RTV solid dispersions (RTV SD) via solvent evaporation method. RTV SD exhibited enhanced dissolution manner, while the oral bioavailability of RTV SD was equivalent with the Reference Standard Norvir® but increased significantly compared to the ternary physical mixture. Thus, the ternary SD system might be promisingly employed as efficient drug delivery system for RTV, while the HPMCAS-HF/SLS combination could be recommended as effective excipient for fabricating steady solid dispersions loading poorly soluble API.

Polyelectrolyte Matrices in the Modulation of Intermolecular Electrostatic Interactions for Amorphous Solid Dispersions: A Comprehensive Review

Polyelectrolyte polymers have been widely used in the pharmaceutical field as excipients to facilitate various drug delivery systems. Polyelectrolytes have been used to modulate the electrostatic environment and enhance favorable interactions between the drug and the polymer in amorphous solid dispersions (ASDs) prepared mainly by hot-melt extrusion. Polyelectrolytes have been used alone, or in combination with nonionic polymers as interpolyelectrolyte complexes, or after the addition of small molecular additives. They were found to enhance physical stability by favoring stabilizing intermolecular interactions, as well as to exert an antiplasticizing effect. Moreover, they not only enhance drug dissolution, but they have also been used for maintaining supersaturation, especially in the case of weakly basic drugs that tend to precipitate in the intestine. Additional uses include controlled and/or targeted drug release with enhanced physical stability and ease of preparation via novel continuous processes. Polyelectrolyte matrices, used along with scalable manufacturing methods in accordance with green chemistry principles, emerge as an attractive viable alternative for the preparation of ASDs with improved physical stability and biopharmaceutic performance.

Ternary solid dispersions: classification and formulation considerations

The number of active pharmaceutical compounds from the biopharmaceutical classification system (BCS) belonging to Class II and IV have significantly increased in recent years. These compounds have high therapeutic potential but are difficult to formulate as oral dosage forms due to their poor aqueous solubility. The solubility and bioavailability of these poorly water-soluble compounds can be increased by various formulation approaches, such as amorphous solid dispersions (ASD), salt formation, complexations, etc. Out of these techniques, the ASD approach, where compounds are converted into amorphous form and embedded in the hydrophilic matrix, have been successfully used in many marketed preparations. The recent advancement of this ASD approach is the design of ternary solid dispersions (TSD), where an additional component is added to further improve their performance in terms of solubility, stability, and processability. This review discusses the classification, mechanism of performance improvement, preparation techniques, and characterizations for TSD.

Supersaturating drug delivery systems containing fixed-dose combination of two antihypertensive drugs: Formulation, in vitro evaluation and molecular metadynamics simulations

The purpose of this study was to associate the poorly water-soluble antihypertensive drugs candesartan cilexetil (CC) and hydrochlorothiazide (HCTZ) as fixed-dose combination, in the form of ternary Amorphous Solid Dispersions (ASD), using hydroxypropylmethylcellulose acetate succinate (HPMCAS) type M as polymeric carrier. The potential of the system to generate and to maintain supersaturation of both drugs was also evaluated. The ASDs were prepared by ball milling technique and solid-state characterization was performed by differential scanning calorimetry (DSC), Fourier transformed infrared spectroscopy (FTIR) and X-ray powder diffraction (XRPD). Interaction between drugs and polymer in solid-state was evaluated by molecular metadynamics simulations. In vitro supersaturation profiles were determined in biorelevant medium. Physicochemical stability of ASDs was also evaluated under different storage conditions. Amorphization of both drugs was confirmed by solid-state characterization techniques. Molecular metadynamics simulations indicated that CC has stronger interaction with HMPCAS than HCTZ. In vitro supersaturation studies have shown that ternary ASDs could generate and maintain supersaturation of both drugs in biorelevant medium. The polymer reduced the desupersaturation of both drugs. Ternary ASDs also showed physicochemical stability over a period of 90 days, demonstrating the potential of the polymer in reducing the drugs recrystallization over the time. Ternary ASDs of CC, HCTZ and HPMCAS can be considered a promising system to associate the drugs as fixed-dose combinations. Also, these systems generate and maintain supersaturation of both drugs in biorelevant medium, with great storage stability. HPMCAS M was a good carrier for reducing the desupersaturation of associated HCTZ and CC.

Antitumor efficacy of CHMFL-KIT-110 solid dispersion in mouse xenograft models of human gastrointestinal stromal tumors

PURPOSE

CHMFL-KIT-110, a selective c-KIT kinase inhibitor for gastrointestinal stromal tumors (GISTs), possesses a poorly water-soluble, limiting the further development of the drug. This study was to investigate the antitumor efficacy of CHMFL-KIT-110 and CHMFL-KIT-110 solid dispersion (laboratory code: HYGT-110 SD) in GIST tumor xenograft models and to explore the PK/PD relationship of HYGT-110 SD.

METHODS

Plasma concentrations of HYGT-110 and HYGT-110 SD were determined by LC-MS/MS in KM mice. Antitumor activity was evaluated by measuring tumor volume and weight in c-KIT-dependent GIST xenograft models. PK/PD relationship was assessed by LC-MS/MS and Western Blot in the GIST-T1 xenografted mice.

RESULTS

HYGT-110 exhibited a low oral bioavailability (10.91%) in KM mice. Compared with HYGT-110 treatment, the C_max and AUC_0-t of HYGT-110 SD in mice plasma were substantially increased by 18.81 and 6.76-fold, respectively. HYGT-110 SD (10, 30, and 100 mg/kg/day) also could dose-dependently decrease the tumor volume and weight in the GIST-882 cell-inoculated xenograft mouse models and show 86.35% tumor growth inhibition (TGI) at 28 days at a 25 mg/kg bid dosage in the GIST-T1 cell-inoculated xenograft mouse model. The free concentration of HYGT-110 in plasma was closely correlated with the inhibition of c-KIT phosphorylation levels in tumor tissues.

CONCLUSIONS

In comparison with the HPMC formulation, both improved PK and PD characteristics of the solid dispersion formulation of CHMFL-KIT-110 were observed in in vivo animal experiments.

Nanostructured Valsartan Microparticles with Enhanced Bioavailability Produced by High-Throughput Electrohydrodynamic Room-Temperature Atomization

The high-throughput drying and encapsulation technique called electrospraying assisted by pressurized gas (EAPG) was used for the first time to produce nanostructured valsartan within microparticles of excipients. Valsartan, a poorly absorbed and lipid-soluble drug, was selected since it is considered a good model for BCS class II drugs. Two different polymeric matrices were selected as excipients, i.e., hydroxypropyl methylcellulose (HPMC) and lactose monohydrate, while Span 20 was used as a surfactant. The produced 80% valsartan loading formulations were characterized in terms of morphology, crystallinity, in vitro release, in vitro Caco-2 cells’ permeability, and in vivo pharmacokinetic study. Spherical microparticles of ca. 4 μm were obtained within which valsartan nanoparticles were seen to range from 150 to 650 nm. Wide-angle X-ray scattering and differential scanning calorimetry confirmed that valsartan had a lower and/or more ill-defined crystallinity than the commercial source, and photon correlation spectroscopy and transmission electron microscopy proved that it was dispersed and distributed in the form of nanoparticles of controlled size. In vitro dissolution tests showed that the HPMC formulation with the lowest API particle size, i.e., 150 nm, dissolved 2.5-fold faster than the commercial valsartan in the first 10 min. This formulation also showed a 4-fold faster in vitro permeability than the commercial valsartan and a 3-fold higher systemic exposure than the commercial sample. The results proved the potential of the EAPG processing technique for the production of safe-to-handle microparticles containing high quantities of a highly dispersed and distributed nanonized BCS class II model drug with enhanced bioavailability.

Lacidipine: review of analytical methods developed for pharmaceutical dosage forms and biological fluids

Lacidipine (LAC) is a calcium antagonist used in the treatment of hypertension. It is a lipophilic drug containing dihydropyridine ring that is responsible for the activity. This review article gives an overview of various analytical techniques proposed for the determination of LAC in pharmaceutical dosage forms, in pure form, in biological fluids and to determine characteristics of LAC in modified release dosage forms. Ultra violet/visible spectrophotometric, spectroflourimetric, high performance liquid chromatography, high performance thin layer chromatography, electro-analytical, bioanalytical and miscellaneous methods such as microbiological assay, X-ray diffraction, differential scanning calorimetry, were discussed. Various parameters such as system suitability, selectivity, linearity, precision, accuracy, limit of detection, limit of quantification and robustness have been discussed for the employed methods.

Nano-sized Solid Dispersions for Improving the Bioavailability of Poorly Water-soluble Drugs

It has been well established that solid dispersions have a high potential to increase the release rate of poorly water-soluble drugs, resulting in high drug bioavailability. Solid dispersions have been vigorously investigated with various practical approaches in recent decades. Improvements in wettability, molecular interactions and drugs being held in an amorphous state in solid dispersions are the main mechanisms underlying the high drug release rate. Moreover, the synergistic effect of incorporating nanotechnology in solid dispersions is expected to lead to an advanced drug delivery system for poorly water-soluble drugs. However, to date, there is still a lack of reviews providing outlooks on the nano-sized solid dispersions that have been substantially investigated for improving the bioavailability of poorly water-soluble drugs. In the current review, we aim to overview key advantages and approaches for producing nano-sized solid dispersions. The classification of key strategies in developing nano-sized solid dispersions will advance the creation of even more efficient solid dispersions, which will translate into clinical studies.

A critical review of spray-dried amorphous pharmaceuticals: Synthesis, analysis and application

New drugs are frequently found with poor water-solubility in recent pharmaceutical projects, which brings difficulties of bioavailability for the clinical development of new drugs. When these drug compounds in a crystalline state are absorbed by gastrointestinal tract, their dissolution rates and absorption rates are very limited. Nowadays, various methods have been developed to improve the solubility, dissolution and bioavailability of drugs. According to the characteristics of drugs, this work suggests the use of spray drying technology to amorphize APIs (active pharmaceutical ingredients) to improve their bioavailability. This work reviews the properties of the spray-dried amorphous drugs, the progress made in drug synthesis and application, and the existing problems.

Molecular Interactions in Solid Dispersions of Poorly Water-Soluble Drugs

Physicochemical characterization is a crucial step for the successful development of solid dispersions, including the determination of drug crystallinity and molecular interactions. Typically, the detection of molecular interactions will assist in the explanation of different drug performances (e.g., dissolution, solubility, stability) in solid dispersions. Various prominent reviews on solid dispersions have been reported recently. However, there is still no overview of recent techniques for evaluating the molecular interactions that occur within solid dispersions of poorly water-soluble drugs. In this review, we aim to overview common methods that have been used for solid dispersions to identify different bond formations and forces via the determination of interaction energy. In addition, a brief background on the important role of molecular interactions will also be described. The summary and discussion of methods used in the determination of molecular interactions will contribute to further developments in solid dispersions, especially for quick and potent drug delivery applications.

Developmental Strategies of Curcumin Solid Dispersions for Enhancing Bioavailability

BACKGROUND

Although curcumin has been demonstrated to be beneficial in treating various diseases, its low solubility, chemical stability and bioavailability limit its application, especially in cancer therapy.

METHODS

Solid dispersions have been utilized in the last few decades to improve the bioavailability and stability of curcumin.

RESULTS

However, there is a lack of summaries and classifications of the methods for preparing curcumin with this technology. The current review aims to overview the strategies used to develop solid dispersions containing curcumin for improving drug delivery. The classification of techniques for creating solid dispersions for curcumin was summarized, including systems for protecting curcumin degradation despite its chemical stability. The applications of advanced nanotechnologies in recent studies of solid dispersions were also discussed to explain the roles of nanoparticles in formulations.

CONCLUSION

This overview of recent developments in formulating solid dispersions for improving curcumin bioavailability will contribute to future studies of curcumin for clinical development.

Mechanism and Improved Dissolution of Glycyrrhetinic Acid Solid Dispersion by Alkalizers

The purpose of this study was to increase the dissolution of glycyrrhetinic acid (GA) by preparing ternary solid dispersion (TSD) systems containing alkalizers, and to explore the modulating mechanism of alkalizers in solid dispersion systems. GA TSDs were prepared by hot melt extrusion (HME) with Kollidon^® VA64 as the carrier and L-arginine/meglumine as the alkalizers. The in vitro release of the TSD was investigated with a dissolution test, and the dissociation constant (pKa) was used to describe the ionization degree of the drug in different pH buffers. Scanning electron microscopy (SEM), differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD), Fourier Transform Infrared Spectroscopy (FTIR), Raman spectra, X-ray photoelectron spectroscopy (XPS), and a molecular model were used for solid-state characterizations and to study the dissolution mechanism of the TSDs. It was evident that the dissolution of GA significantly increased as a result of the TSD compared to the pure drug and binary solid dispersion. SEM, DSC, and XPRD data showed that GA transformed into an amorphous form in TSD. As illustrated by FTIR, Raman, XPS, and molecular docking, high binding energy ion-pair complexes formed between GA and the alkalizers during the process of HME. These can destroy the H-bond between GA molecules. Further, intermolecular H-bonds formed between the alkalizers and Kollidon^® VA64, which can increase the wettability of the drug. Our results will significantly improve the solubility and dissolution of GA. In addition, the lower pKa value of TSD indicates that higher ionization is beneficial to the dissolution of the drug. This study should facilitate further developments of TSDs containing alkalizers to improve the dissolution of weakly acidic drugs and gain a richer understanding of the mechanism of dissolution.