Mechanical and Biochemical Role of Fibrin Within a Venous Thrombus

Neutrophil Extracellular Traps in Tumors and Potential Use of Traditional Herbal Medicine Formulations for Its Regulation

Neutrophil extracellular traps (NETs) are extracellular fibers composed of deoxyribonucleic acid (DNA) and decorated proteins produced by neutrophils. Recently, NETs have been associated with the development of many diseases, including tumors. Herein, we reviewed the correlation between NETs and tumors. In addition, we detailed active compounds from traditional herbal medicine formulations that inhibit NETs, related nanodrug delivery systems, and antibodies that serve as "guiding moieties" to ensure targeted delivery to NETs. Furthermore, we discussed the strategies used by pathogenic microorganisms to evade NETs.

Bivalirudin-hydrogel coatings of polyvinyl chloride on extracorporeal membrane oxygenation for anticoagulation

Introduction

Thromboembolic events associated with extracorporeal membrane oxygenation (ECMO) in clinical treatment are typical. Heparin coating has been widely employed as a surface modification strategy for ECMO tubes. However, its clinical application is often accompanied by unavoidable complications due to its mechanism of action. As a direct thrombin inhibitor with a single target, Bivalirudin (BV) has exhibited a lower incidence of adverse events and superior pharmacokinetic performance compared to heparin.

Methods

A gelatin methacrylate hydrogel (GelMA) coating layer with BV was successfully synthesized on polyvinyl chloride, and the drug release ratio was close to complete release within 7 days.

Results and discussion

Simulated extracorporeal circulation experiments using roller pumps in vitro and jugular arteriovenous bypass experiments in rabbits demonstrated its outstanding anticoagulant efficacy. The systemic anticoagulant assay proved that BV hydrogel coating does not affect the coagulation level, and reduces the risk of complications such as systemic bleeding compared to intravenous injection. BV-Coating GelMA hydrogel tube has exhibited good biocompatibility and significantly improved anticoagulant performance, making it an optimal choice for surface materials used in blood-contacting medical devices.

Embedded macrophages induce intravascular coagulation in 3D blood vessel-on-chip

Macrophages are innate immune cells that prevent infections and help in wound healing and vascular inflammation. While these cells are natural helper cells, they also contribute to chronic diseases, e.g., by infiltrating the endothelial layer in early atherosclerosis and by promoting vascular inflammation. There is a crosstalk between inflammatory pathways and key players in thrombosis, such as platelets and endothelial cells - a phenomenon known as 'thromboinflammation'. The role of the embedded macrophages in thromboinflammation in the context of vascular disease is incompletely understood. Blood vessels-on-chips, which are microfluidic vascular cell culture models, have been used extensively to study aspects of vascular disease, like permeability, immune cell adhesion and thrombosis. Blood perfusion assays in blood vessel-on-chip models benefit from multiple unique aspects of the models, such as control of microvessel structure and well-defined flow patterns, as well as the ability to perform live imaging. However, due to their simplified nature, blood vessels-on-chip models have not yet been used to capture the complex cellular crosstalk that is important in thromboinflammation. Using induced pluripotent stem cell-derived endothelial cells and polarized THP-1 monocytes, we have developed and systematically set up a 3D blood vessel-on-chip with embedded (lipid-laden) macrophages, which is created using sequential cell seeding in viscous finger patterned collagen hydrogels. We have set up a human whole blood perfusion assay for these 3D blood vessels-on-chip. An increased deposition of fibrin in the blood vessel-on-chip models containing lipid-laden macrophages was observed. We anticipate the future use of this advanced vascular in vitro model in drug development for early atherosclerosis or aspects of other vascular diseases.

A MALDI Mass Spectrometry Imaging Sample Preparation Method for Venous Thrombosis with Initial Lipid Characterization of Lab-Made and Murine Clots

Venous thromboembolism (VTE) and its complications affect over 900,000 people in the U.S. annually, with a third of cases resulting in fatality. Despite such a high incidence rate, venous thrombosis research has not led to significant changes in clinical treatments, with standard anti-coagulant therapy (heparin followed by a vitamin K antagonist) being used since the 1950s. Mechanical thrombectomy is an alternative strategy for treating venous thrombosis; however, clinical guidelines for patient selection have not been well-established or accepted. The effectiveness of both treatments is impacted by the heterogeneity of the thrombus, including the mechanical properties of its cellular components and its molecular makeup. A full understanding of the complex interplay between disease initiation and progression, biochemical molecular changes, tissue function, and mechanical properties calls for a multiplex and multiscale approach. In this work, we establish a protocol for using matrix-assisted laser desorption/ionization (MALDI) mass spectrometry imaging to characterize spatial heterogeneity of biomolecules in lab-made blood clots and ex vivo murine thrombi. In this work, we compared (1) tissue preservation and cryosectioning methods, (2) various matrixes, 9-aminoacridine hydrochloride monohydrate (9AA), 2,5-dihydroxybenzoic acid (DHB), and alpha-cyano-4-hydroxycinnamic acid matrix (CHCA), (3) plasma-rich versus red-blood-cell rich lab-made blood clots, and (4) lab-made blood clots versus ex vivo murine thrombi. This project is the first step in our work to combine mass spectrometry imaging with biomechanical testing of blood clots to improve our understanding of VTE.

Precision Navigation of Venous Thrombosis Guided by Viscosity-Activatable Near-Infrared Fluorescence

Thrombus are blood clots formed by abnormal hemostasis in blood vessels and are closely associated with various diseases such as pulmonary embolism, myocardial infarction and stroke. Early diagnosis and treatment of thrombus is the key to reducing the high risk of thrombotic disease. Given that early thrombus is small in early size, free instability, wide regional distribution and fast formation, it is urgent to develop all-inclusive detection methods that combine high signal-to-noise ratio, in situ dynamic and rapid in-depth tissue imaging. Near-infrared (NIR) fluorescence imaging, with its excellent high spatiotemporal resolution and tissue penetration depth, is a powerful technique for direct visualization of thrombotic events in situ. Considering the fibrin highly expressed in the thrombus is a typical thrombotic target. Moreover, the viscosity of the thrombus is markedly higher than its surroundings. Therefore, we developed a fibrin-targeting and viscosity-activating thrombus NIR fluorescent probe (TIR-V) for high-resolution and high-sensitivity in situ lighten-up thrombus. TIR-V has the advantages of good thrombus targeting, significant "off-on" fluorescence specific response to viscosity, bright NIR fluorescence and good biocompatibility. The thrombus is clearly delineated by a high signal-to-noise ratio NIR fluorescence imaging, enabling imaging detection and precise navigation of thrombotic regions. This work demonstrates the potential of TIR-V as a bifunctional probe for definitive diagnostic imaging and direct navigation of thrombotic lesions in clinical applications.

A Fibrin Site-Specific Nanoprobe for Imaging Fibrin-Rich Thrombi and Preventing Thrombus Formation in Venous Vessels

Venous thromboembolism (VTE) is a prevalent public health issue worldwide. Before treatment, spatiotemporally accurate thrombus detection is essential. However, with the currently available imaging technologies, this is challenging. Herein, the development of a novel fibrin-specific nanoprobe (NP) based on the conjugation of poly(lactic-co-glycolic acid) with the pentapeptide Cys-Arg-Glu-Lys-Ala (CREKA) for selective and semiquantitative imaging in vivo is presented. By integrating Fe₃ O₄ and NIR fluorochrome (IR780), the NP can function as a highly sensitive sensor for the direct analysis of thrombi in vivo. The fibrin-specific NP distinguishes fibrin-rich thrombi from collagen-rich or erythrocyte-rich thrombi, which can be beneficial for future individually tailored therapeutic strategy. Furthermore, loading NPs with the ketotifen fumarate results in mast cell degranulation inhibition, and hence, NPs can prevent thrombosis without the risk of excessive bleeding. Thus, the use of fibrin-specific NPs may serve as a safe alternative approach for the detection and prevention of VTEs in susceptible populations in the future.

Biomaterials for Hemostasis

Uncontrolled bleeding is a major problem in trauma and emergency medicine. While materials for trauma applications would certainly find utility in traditional surgical settings, the unique environment of emergency medicine introduces additional design considerations, including the need for materials that are easily deployed in austere environments. Ideally, these materials would be available off the shelf, could be easily transported, and would be able to be stored at room temperature for some amount of time. Both natural and synthetic materials have been explored for the development of hemostatic materials. This review article provides an overview of classes of materials used for topical hemostats and newer developments in the area of injectable hemostats for use in emergency medicine. Expected final online publication date for the Annual Review of Biomedical Engineering, Volume 24 is June 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Endovascular treatment for cerebral venous thrombosis: current status, challenges, and opportunities

Cerebral venous thrombosis (CVT) mostly affects young people. So far, endovascular treatment (EVT) has not been shown to be beneficial in CVT, partially because venous EVT tools are not yet fully optimized, and therefore EVT is only used as a rescue treatment in rare cases. Identifying a subgroup of CVT patients that could benefit from EVT is challenging, given the milder course of disease compared with acute ischemic stroke, the paucity of data on prognostic factors (both in the clinical and imaging domain), and the lack of consensus on what constitutes 'technical success' in CVT EVT. In this review, we discuss the major obstacles that are encountered when trying to identify CVT patients that may benefit from EVT, and propose a roadmap that could help to overcome these challenges in the near future.

Nanomechanics of Blood Clot and Thrombus Formation

Mechanical properties have been extensively studied in pure elastic or viscous materials; however, most biomaterials possess both physical properties in a viscoelastic component. How the biomechanics of a fibrin clot is related to its composition and the microenvironment where it is formed is not yet fully understood. This review gives an outline of the building mechanisms for blood clot mechanical properties and how they relate to clot function. The formation of a blood clot in health conditions or the formation of a dangerous thrombus go beyond the mere polymerization of fibrinogen into a fibrin network. The complex composition and localization of in vivo fibrin clots demonstrate the interplay between fibrin and/or fibrinogen and blood cells. Studying these protein–cell interactions and clot mechanical properties may represent new methods for the evaluation of cardiovascular diseases (the leading cause of death worldwide), creating new possibilities for clinical diagnosis, prognosis, and therapy.

Expected final online publication date for the Annual Review of Biophysics, Volume 51 is May 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Strontium-Loaded Nanotubes of Ti-24Nb-4Zr-8Sn Alloys for Biomedical Implantation

Ti-24Nb-4Zr-8Sn (Ti2448) alloys, with a relatively low elastic modulus and unique mechanical properties, are desirable materials for oral implantation. In the current study, a multifaceted strontium-incorporating nanotube coating was fabricated on a Ti2448 alloy (Ti2-NTSr) through anodization and hydrothermal procedures. In vitro, the Ti2-NTSr specimens demonstrated better osteogenic properties and more favorable osteoimmunomodulatory abilities. Moreover, macrophages on Ti2-NTSr specimens could improve the recruitment and osteogenic differentiation of osteoblasts. In vivo, dense clots with highly branched, thin fibrins and small pores existed on the Ti2-NTSr implant in the early stage after surgery. Analysis of the deposition of Ca and P elements, hard tissue slices and the bone-implant contact rate (BIC%) of the Ti2-NTSr implants also showed superior osseointegration. Taken together, these results demonstrate that the Ti2-NTSr coating may maximize the clinical outcomes of Ti2448 alloys for implantation applications.

Improved Reactive Oxygen Species Generation by Chiral Co3 O4 Supraparticles under Electromagnetic Fields

One of the most common methods to treat thromboembolism is the use of thrombolytic drugs to activate fibrinolytic protease. The aim of this treatment was to initiate the lysis of fibrin; however, there are many side-effects associated with this form of treatment. Herein, we fabricated chiral Co₃ O₄ supraparticles (SPs) with a g-factor of up to 0.02 at 550 nm and paramagnetic performance applied in the treatment of thromboembolism under an electromagnetic field (MF). In vitro experiments showed that d-SPs degraded blood clot within 8 hours under MF. Compared to l-SPs, d-SPs exhibited much stronger thrombolytic ability and effectively enhanced the survival rate of thrombosis model mice more than 70 % in the 25 d of observation. The results of mechanism study showed that under MF, the level of reactive oxygen species (ROS) produced by d-SPs were 1.5 times higher than that of l-SPs, which might be attributed to the chiral-induced spin selectivity effects.

Modulating the rate of fibrin formation and clot structure attenuates microvascular thrombosis in systemic inflammation

Systemic inflammation can lead to coagulopathy and disseminated intravascular coagulation (DIC). In prior studies, the recombinant A2 domain of human von Willebrand factor (VWF; A2 protein) attenuated DIC and decreased mortality in lipopolysaccharide (LPS)-treated mice. Here, we performed studies to dissect the mechanism by which the A2 protein moderates DIC. We used confocal microscopy to analyze the fibrin clot structure in plasma from healthy humans and endotoxemic mice, turbidity assays to examine fibrin polymerization, and a murine model for LPS-induced DIC and introduced a loss-of-function mutation into the A2 protein for fibrin. The mutation of the residue E1567 located in the α2 helix of the folded A2 domain of VWF inhibited binding activity for fibrin, possibly mapping a novel region containing a putative binding site for fibrin. The A2 protein increased the initial rate of change of fibrin polymerization, intercalated into the fibrin network, and modified the resultant clot structure in vitro. Furthermore, ex vivo experiments using plasma from mice with endotoxemia treated with the A2 protein revealed an increased rate of fibrin formation and an altered clot structure as compared with plasma from nontreated sick animals. Moreover, and in contrast to the A2 mutant, the A2 protein improved survival and reduced fibrin deposition and microvascular thrombosis in mice with endotoxemia-induced DIC. Importantly, in vivo and in vitro studies indicated that the A2 protein did not affect experimental thrombosis. Thus, we provide evidence for a novel treatment to attenuate systemic inflammation-induced coagulopathy/DIC via targeting fibrin formation, without an increased risk for bleeding.

Fibrinolysis in Venous Thromboembolism

Fibrinolysis is of paramount importance in maintaining or regaining the patency of veins and pulmonary arteries obstructed by thrombi. Growing experimental and clinical evidence indicates that impaired fibrinolysis mediated by multiple complex mechanisms is involved in venous thromboembolism (VTE). Global plasma fibrin clot lysis markers, especially clot lysis time, have been reported to predict recurrent deep-vein thrombosis and pulmonary embolism. The current overview summarizes available data linking fibrinolysis to VTE and its long-term sequelae.

Anomalous mechanics of Zn2+-modified fibrin networks

Fibrin is the main component of blood clots. The mechanical properties of fibrin are therefore of critical importance in successful hemostasis. One of the divalent cations released by platelets during hemostasis is Zn2+; however, its effect on the network structure of fibrin gels and on the resultant mechanical properties remains poorly understood. Here, by combining mechanical measurements with three-dimensional confocal microscopy imaging, we show that Zn2+ can tune the fibrin network structure and alter its mechanical properties. In the presence of Zn2+, fibrin protofibrils form large bundles that cause a coarsening of the fibrin network due to an increase in fiber diameter and reduction of the total fiber length. We further show that the protofibrils in these bundles are loosely coupled to one another, which results in a decrease of the elastic modulus with increasing Zn2+ concentrations. We explore the elastic properties of these networks at both low and high stress: At low stress, the elasticity originates from pulling the thermal slack out of the network, and this is consistent with the thermal bending of the fibers. By contrast, at high stress, the elasticity exhibits a common master curve consistent with the stretching of individual protofibrils. These results show that the mechanics of a fibrin network are closely correlated with its microscopic structure and inform our understanding of the structure and physical mechanisms leading to defective or excessive clot stiffness.

A Novel Mouse Model for Cerebral Venous Sinus Thrombosis

Cerebral venous sinus thrombosis (CVST) is an uncommon cause of stroke resulting in parenchymal injuries associated with heterogeneous clinical symptoms and prognosis. Therefore, an experimental animal model is required to further study underlying mechanisms involved in CVST. This study is aimed at developing a novel murine model suitable and relevant for evaluating injury patterns during CVST and studying its clinical aspects. CVST was achieved in C57BL/6J mice by autologous clot injection into the superior sagittal sinus (SSS) combined with bilateral ligation of external jugular veins. Clot was prepared ex vivo using thrombin before injection. On days 1 and 7 after CVST, SSS occlusion and associated-parenchymal lesions were monitored using different modalities: in vivo real-time intravital microscopy, magnetic resonance imaging (MRI), and immuno-histology. In addition, mice were subjected to a neurological sensory-motor evaluation. Thrombin-induced clot provided fibrin- and erythrocyte-rich thrombi that lead to reproducible SSS occlusion at day 1 after CVST induction. On day 7 post-CVST, venous occlusion monitoring (MRI, intravital microscopy) showed that initial injected-thrombus size did not significantly change demonstrating no early spontaneous recanalization. Microscopic histological analysis revealed that SSS occlusion resulted in brain edema, extensive fibrin-rich venular thrombotic occlusion, and ischemic and hemorrhagic lesions. Mice with CVST showed a significant lower neurological score on post-operative days 1 and 7, compared to the sham-operated group. We established a novel clinically CVST-relevant model with a persistent and reproducible SSS occlusion responsible for symptomatic ischemic and hemorrhagic lesions. This method provides a reliable model to study CVST physiopathology and evaluation of therapeutic new regimens.

Purification, characterization, and chemical modification of Bacillus velezensis SN-14 fibrinolytic enzyme

Fermented bean foods are a crucial source of fibrinolytic enzymes. The presented study aimed to purify, characterize, and chemically modify Bacillus velezensis SN-14 fibrinolytic enzyme. The fibrinolytic enzyme was purified using CTAB/isooctane/hexyl alcohol/n-butyl alcohol reverse micellar system, and the purified enzyme was chemically modified to improve its enzymatic activity and stability. Enzyme activity recovery and the purification fold for this enzyme were 44.5 ± 1.9% and 4.93 ± 0.05 fold, respectively. SDS-PAGE results showed that the molecular weight of the purified fibrinolytic enzyme was around 28 kDa. Besides, the optimum temperature and pH of the purified fibrinolytic enzyme were 37 °C and 8-9, respectively. Fe²⁺, mPEG5000, and pepsin were used for chemical modification and for improving the activity and stability of the purified enzyme. Thermal and acid-base stability of chemically modified enzymes increased significantly, whereas enzymatic activity increased by 7.3 times. After 30 d of frozen storage, the modified enzyme's activity was remarkably lower (33.2%) than the unmodified enzyme (60.6%). The current study on B. velezensis SN-14 fibrinolytic enzyme and chemical modification method using Fe²⁺, mPEG5000, and pepsin provide a reference for developing fibrinolytic drugs and foods.

Emerging nanotherapeutics for antithrombotic treatment

Thrombus causes insufficient blood flow and ischemia damages to brain and heart, leading to life-threatening cardio-cerebrovascular diseases. Development of efficient antithrombotic strategies has long been a high priority, owing to the high morbidity and mortality of thrombotic diseases. With the rapid development of biomedical nanotechnology in diagnosis and treatment of thrombotic disorder, remarkable progresses have been made in antithrombotic nanomedicines in recent years. Herein, we outline the recent advances in this field at the intersection of thrombus theranostics and biomedical nanotechnology. First, thrombus diagnosis techniques based on biomedical nanotechnology are presented. Then, emerging antithrombotic nanotherapeutics are overviewed, including thrombus-targeting strategies, thrombus stimuli-responsive nanosystems and phase transition-driven nanotherapeutics. Furthermore, multifunctional nanosystems for combination theranostics of thrombotic diseases are discussed. Finally, the design considerations, advantages and challenges of these biomedical nanotechnology-driven therapeutics in clinical translation are highlighted.

Quantifying Physical Thrombus Characteristics on Cardiovascular Biomaterials Using MicroCT

Hemocompatibility is a critical consideration when designing cardiovascular devices. Methods of assessing hemocompatibility range from in vitro protein adsorption and static platelet attachment to in vivo implantation. A standard preclinical assessment of biomaterial hemocompatibility is ex vivo quantification of thrombosis in a chronic arteriovenous shunt. This technique utilizes flowing blood and quantifies platelet accumulation and fibrin deposition. However, the physical parameters of the thrombus have remained unknown. This study presents the development of a novel method to quantify the 3D physical properties of the thrombus on different biomaterials: expanded polytetrafluoroethylene and a preclinical hydrogel, poly(vinyl alcohol). Tubes of 4-5 mm inner diameter were exposed to non-anticoagulated blood flow for 1 hour and fixed. Due to differences in biomaterial water absorption properties, unique methods, requiring either the thrombus or the lumen to be radiopaque, were developed to quantify average thrombus volume within a graft. The samples were imaged using X-ray microcomputed tomography (microCT). The methodologies were strongly and significantly correlated to caliper-measured graft dimensions (R2 = 0.994, p < 0.0001). The physical characteristics of the thrombi were well correlated to platelet and fibrin deposition. MicroCT scanning and advanced image analyses were successfully applied to quantitatively measure 3D physical parameters of thrombi on cardiovascular biomaterials under flow.

Oral Charcoal Adsorbents Attenuate Neointima Formation of Arteriovenous Fistulas

Chronic kidney disease (CKD) accelerates the development of neointima formation at the anastomosis site of arteriovenous (AV) fistulas. Accumulation of certain uremic toxins has a deleterious effect on the cardiovascular system. The oral charcoal adsorbent, AST-120, reduces circulating and tissue uremic toxins, but its effect on neointima formation at an AV fistula is unknown. To understand the effect of CKD and AST-120 on neointima formation, we created AV fistulas (common carotid artery to the external jugular vein in an end-to-side anastomosis) in mice with and without CKD. AST-120 was administered in chow before and after AV fistula creation. Administration of AST-120 significantly decreased serum indoxyl sulfate levels in CKD mice. CKD mice had a larger neointima area than non-CKD mice, and administration of AST-120 in CKD mice attenuated neointima formation. Both smooth muscle cell and fibrin components were increased in CKD mice, and AST-120 decreased both. RNA expression of MMP-2, MMP-9, TNFα, and TGFβ was increased in neointima tissue of CKD mice, and AST-120 administration neutralized the expression. Our results provided in vivo evidence to support the role of uremic toxin-binding therapy on the prevention of neointima formation. Peri-operative AST-120 administration deserves further investigation as a potential therapy to improve AV fistula patency.

The molecular basis of platelet biogenesis, activation, aggregation and implications in neurological disorders

Platelets are anucleated blood constituents, vital for hemostasis and involved in the pathophysiology of several cardiovascular, neurovascular diseases as well as inflammatory processes and metastasis. Over the past few years, the molecular processes that regulate the function of platelets in hemostasis and thrombosis have emerged revealing platelets to be perhaps more complex than may have been expected. The most understood part of platelets is to respond to a blood vessel injury by altering shape, secreting granule contents, and aggregating. These responses, while advantageous for hemostasis, can become detrimental when they root ischemia or infarction. Only a few transcription and signaling factors involved in platelet biogenesis have been identified till date. Platelets encompass an astonishingly complete array of organelles and storage granules including mitochondria, lysosomes, alpha granules, dense granules, a dense tubular system (analogous to the endoplasmic reticulum of nucleated cells); a highly invaginated plasma membrane system known as the open canalicular system (OCS) and large fields of glycogen. Platelets as a model cells to study neurological disorders have been recommended by several researchers since several counterparts exist between platelets and the brain, which make them interesting for studying the neurobiology of various neurological disorders. This review has been compiled with an aim to integrate the latest research on platelet biogenesis, activation and aggregation focusing on the molecular pathways that power and regulate these processes. The dysregulation of important molecular players affecting fluctuating platelet biology and thereby resulting in neurovascular diseases has also been discussed.

Microfluidics contrasted to thrombelastography: perplexities in defining hypercoagulability

BACKGROUND

Elevated clot strength (maximum amplitude [MA]) measured by thrombelastography (TEG) is associated with thrombotic complications. However, it remains unclear how MA translates to thrombotic risks, as this measurement is independent of time, blood flow, and clot degradation. We hypothesize that under flow conditions, increased clot strength correlates to time-dependent measurements of coagulation and resistance to fibrinolysis.

MATERIALS AND METHODS

Surgical patients at high risk of thrombotic complications were analyzed with TEG and total thrombus-formation analysis system (T-TAS). TEG hypercoagulability was defined as an r <10.2 min, angle >59, MA >66 or LY30 <0.2% (based off of healthy control data, n = 141). The T-TAS AR and PL chips were used to measure clotting at arterial shear rates. T-TAS measurements include occlusion start time, occlusion time (OT), occlusion speed (OSp), and total clot generation (area under the curve). These measurements were correlated to TEG indices (R time, angle, MA, and LY30). Both T-TAS and TEG assays were challenged with tissue plasminogen activator (t-PA) to assess clot resistance to fibrinolysis.

RESULTS

Thirty subjects were analyzed, including five controls. TEG-defined hypercoagulability by MA was detected in 52% of the inflammatory bowel disease/cancer patients; 0% was detected in the controls. There were no TEG measurements that significantly correlated with T-TAS AR and PL chip. However, in the presence of t-PA, T-TAS AR determined OSp to have an inverse relationship with TEG angle (-0.477, P = 0.012) and LY30 (-0.449, P = 0.019), and a positive correlation with R time (0.441 P = 0.021). In hypercoagulability determined by TEG MA, T-TAS PL had a significantly reduced OT (4:07 versus 6:27 min, P = 0.043). In hypercoagulability defined by TEG LY30, T-TAS PL had discordant findings, with a significantly prolonged OT (6:36 versus 4:30 min, P = 0.044) and a slower OSp (10.5 versus 19.0 kPa/min, P = 0.030).

CONCLUSIONS

Microfluidic coagulation assessment with T-TAS has an overall poor correlation with most TEG measurements in a predominantly hypercoagulable patient population, except in the presence of t-PA. The one anticipated finding was an elevated MA having a shorter time to platelet-mediated microfluidic occlusion, supporting the role of platelets and hypercoagulability. However, hypercoagulability defined by LY30 had opposing results in which a low LY30 was associated with a longer PL time to occlusion and slower OSp. These discordant findings warrant ongoing investigation into the relationship between clot strength and fibrinolysis under different flow conditions.

Fibrinogen and factor XIII: newly recognized roles in venous thrombus formation and composition

PURPOSE OF REVIEW

In spite of significant morbidity and mortality associated with venous thromboembolism, the underlying pathogenesis remains poorly understood.

RECENT FINDINGS

Clues to operant pathogenic mechanisms are found in the unique morphology and composition of these thrombi, which have substantial red blood cell and fibrin content. Recent studies have revealed biochemical and biophysical mechanisms that dictate fibrin structure in venous thrombi and promote retention of red blood cells within the contracted clots. These mechanisms include newly recognized contributions of fibrin network structure and factor XIII(a)-mediated fibrin crosslinking to venous thrombus composition, size, and stability.

SUMMARY

Continued work to elucidate mechanisms by which fibrin(ogen), factor XIII, and red blood cells contribute to venous thrombus formation, structure, and stability may expose novel molecular targets and strategies for reducing thrombosis and thrombotic complications in certain at-risk patients.

Recellularization of Decellularized Venous Grafts Using Peripheral Blood: A Critical Evaluation

Vascular disease is a major cause of death worldwide, and the growing need for replacement vessels is not fully met by autologous grafts or completely synthetic alternatives. Tissue engineering has emerged as a compelling strategy for the creation of blood vessels for reconstructive surgeries. One promising method to obtain a suitable vessel scaffold is decellularization of donor vascular tissue followed by recellularization with autologous cells. To prevent thrombosis of vascular grafts, a confluent and functional autologous endothelium is required, and researchers are still looking for the optimal cell source and recellularization procedure. Recellularization of a decellularized scaffold with only a small volume of whole blood was recently put forward as a feasible option. Here we show that, in contrast to the published results, this method fails to re-endothelialize decellularized veins. Only occasional nucleated cells were seen on the luminal surface of the scaffolds. Instead, we saw fibrin threads, platelets and scattered erythrocytes. Molecular remnants of the endothelial cells were still attached to the scaffold, which explains in part why earlier results were misinterpreted. Decellularized vascular tissues may still be the best scaffolds available for vascular tissue engineering. However, for the establishment of an adequate autologous endothelial lining, methods other than exposure to autologous whole blood need to be developed.