Synthesis of Mn3O4-anchored graphene sheet nanocomposites via a facile, fast microwave hydrothermal method and their supercapacitive behavior

Mn3O4 nano-octahedrons embedded in nitrogen-doped graphene oxide as potent anode material for lithium-ion batteries

Mn3O4 nano-octahedrons embedded in N-doped graphene oxide (MNGO) nanosheets were synthesized using a simple, energy-efficient, and rapid microwave-digested hydrothermal route in a single step. The structural and morphological aspects of synthesized materials were evaluated by XRD, IR, Raman, FE-SEM, and HR-TEM techniques. Then, the composite MNGO was tested for its Li-ion storage properties and compared with reduced graphene oxide (rGO) and Mn3O4 materials. The MNGO composite exhibited superior reversible specific capacity, excellent cyclic stability, and outstanding structural integrity throughout the electrochemical studies. The MNGO composite showed a reversible capacity of 898 mA h g-1 after 100 cycles at 100 mA g-1 and Coulombic efficiency of 97.8%. Even at a higher current density of 500 mA g-1, it exhibits a higher specific capacity of 532 mA h g-1 (~1.5 times higher than commercial graphite anode). These results demonstrate that Mn3O4 nano-octahedrons embedded on N-doped GO are a highly durable and potent anode material for LIBs.

Supplementary Information

The online version contains supplementary material available at 10.1007/s11581-023-05035-6.

Stereolithography-Derived Three-Dimensional Pyrolytic Carbon/Mn3O4 Nanostructures for Free-Standing Hybrid Supercapacitor Electrodes

The development of permeable three-dimensional (3D) macroporous carbon architectures loaded with active pseudocapacitive nanomaterials offers hybrid supercapacitor (SC) materials with higher energy density, shortened diffusion length for ions, and higher charge-discharge rate capability and thereby is highly relevant for electrical energy storage (EES). Herein, structurally complex and tailorable 3D pyrolytic carbon/Mn₃O₄ hybrid SC electrode materials are synthesized through the self-assembly of MnO₂ nanoflakes and nanoflowers onto the surface of stereolithography 3D-printed architectures via a facile wet chemical deposition route, followed by a single thermal treatment. Thermal annealing of the MnO₂ nanostructures concurrent with carbonization of the polymer precursor leads to the formation of a 3D hybrid SC electrode material with unique structural integrity and uniformity. The microstructural and chemical characterization of the hybrid electrode reveals the predominant formation of crystalline hausmannite-Mn₃O₄ after the pyrolysis/annealing process, which is a favorable pseudocapacitive material for EES. With the combination of the 3D free-standing carbon architecture and self-assembled binder-free Mn₃O₄ nanostructures, electrochemical capacitive charge storage with very good rate capability, gravimetric and areal capacitances (186 F g^-1 and 968 mF cm^-2, respectively), and a long lifespan (>92% after 5000 cycles) is demonstrated. It is worth noting that the gravimetric capacitance value is obtained by considering the full mass of the electrode including the carbon current collector. When only the mass of the pseudocapacitive nanomaterial is considered, a capacitance value of 457 F g^-1 is achieved, which is comparable to state-of-the-art Mn₃O₄-based SC electrode materials.

Alkoxide hydrolysis in-situ constructing robust trimanganese tetraoxide/graphene composite for high-performance lithium storage

Herein we develop a novel and effective alkoxide hydrolysis approach to in-situ construct the trimanganese tetraoxide (Mn₃O₄)/graphene nanostructured composite as high-performance anode material for lithium-ion batteries (LIBs). This is the first report on the synthesis of Mn₃O₄/graphene composite via a facile hydrolysis of the manganese alkoxide (Mn-alkoxide)/graphene precursor. Before hydrolysis, two dimensional (2D) Mn-alkoxide nanoplates are closely adhered to 2D graphene nanosheets via Mn-O chemical bonding. After hydrolysis, the Mn-alkoxide in-situ converts to Mn₃O₄, while the Mn-O bond is preserved. This leads to a robust Mn₃O₄/graphene hybrid architecture with 15 nm Mn₃O₄ nanocrystals homogeneously anchoring on graphene nanosheets. This not only prevents the Mn₃O₄ nanocrystals agglomeration but also inversely mitigates the graphene nanosheets restacking. Moreover, the flexible and conductive graphene nanosheets can accommodate the volume change. This maintains the structural and electrical integrity of the Mn₃O₄/graphene electrode during the cycling process. As a result, the Mn₃O₄/graphene composite displays superior lithium storage performance with high reversible capacity (741 mAh g^-1 at 100 mA g^-1), excellent rate capability (403 mAh g^-1 at 1000 mA g^-1) and long cycle life (527 mAg g^-1 after 300 cycles at 500 mA g^-1). The electrochemical performance highlights the importance of rational design nanocrystals anchoring on graphene nanosheets for high-performance LIBs application.

Europium oxide nanorod-reduced graphene oxide nanocomposites towards supercapacitors

Fast charge/discharge cycles are necessary for supercapacitors applied in vehicles including, buses, cars and elevators. Nanocomposites of graphene oxide with lanthanide oxides show better supercapacitive performance in comparison to any of them alone. Herein, Eu₂O₃ nanorods (EuNRs) were prepared through the hydrothermal method and anchored onto the surface of reduced graphene oxide (RGO) by utilizing a sonochemical procedure (in an ultrasonic bath) through a self-assembly methodology. The morphologies of EuNRs and EuNR-RGO were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and IR spectroscopy. Then, we used EuNRs and EuNR-RGO as electrode materials to investigate their supercapacitive behavior using cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy techniques. In a 3.0 M KCl electrolyte and with a scan rate of 2 mV s⁻¹, EuNR-RGO exhibited a specific capacity of 403 F g⁻¹. Galvanostatic charge–discharge experiments demonstrated a specific capacity of 345.9 F g⁻¹ at a current density of 2 A g⁻¹. The synergy between RGO's flexibility and EuNR's high charge mobility caused these noticeable properties.

Fast charge/discharge cycles are necessary for supercapacitors applied in vehicles including, buses, cars and elevators.

In Situ Green Synthesis of the New Sandwichlike Nanostructure of Mn3O4/Graphene as Lubricant Additives

Nanoparticles and two-dimensional (2D) nanosheets are well-investigated as lubricant additives, which can significantly reduce frictional energy consumption. However, the tribological properties of the additives will deteriorate because of the occurrence of aggregation in the lubricant and the difficulty in entering the frictional contact area. In the present work, the new sandwichlike nanostructure of Mn₃O₄ nanoparticles and graphene nanosheets (Mn₃O₄@G) has been developed by an in situ green synthesis method; i.e., the impurities of Mn²⁺ ions in crude graphite oxide as the precursor are directly transferred into Mn₃O₄ precipitate between the graphene sheets. The graphene has a lamellar structure without folds and wrinkles, and the Mn₃O₄ nanoparticles are not only uniformly anchored on the graphene surfaces but also intercalated in the layers of the graphene nanosheets. The Mn₃O₄@G exhibits excellent tribological properties and high stability because of a synergistic lubrication effect between the graphene nanosheets and the Mn₃O₄ nanoparticles. Even at an ultralow concentration (0.075 wt %) and a high temperature of 125 °C, the friction coefficient and the wear depth have been reduced by 75% and 97% compared with base oil, respectively. The synthesis method and the Mn₃O₄@G nanocomposite have significant potential in various tribological applications for saving energy.

Two-Dimensional Mn3O4 Nanowalls Grown on Carbon Fibers as Electrodes for Flexible Supercapacitors

Emerging flexible and wearable electronic devices necessitates the development of fiber-type energy storage devices to power them. Supercapacitors received great attention for applications in flexible and wearable devices due to their scalability, safety, and miniature size. Herein, we report the fabrication of a flexible supercapacitor using manganese(II,III) oxide (Mn₃O₄) nanowalls (NWs) grown by electrochemical deposition on carbon fiber (CF) as electrode-active material. Here, CF serves as both a substrate for the growth of Mn₃O₄ NWs and a current collector for making a lightweight supercapacitor. Two-dimensional Mn₃O₄ NWs were uniformly grown on CF with high surface coverage. A three-dimensional nanostructured electrode is obtained using these individual two-dimensional Mn₃O₄ NWs. The Mn₃O₄ NWs grown on CF are characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, and Raman spectroscopy. A symmetric sandwich-type supercapacitor is fabricated using two-dimensional Mn₃O₄ NW electrodes in an aqueous 1 M Na₂SO₄ electrolyte. The Mn₃O₄ NW supercapacitor electrode exhibits a specific capacitance of 300.7 F g^-1 at a scan rate of 5 mV s^-1. The assembled symmetric sandwich-type supercapacitor displayed high flexibility even at a bending angle of 180° without altering its performance. The Mn₃O₄ NW supercapacitor also displayed a long cycle life of 7500 cycles with 100% capacitance retention.

In situ mass change and gas analysis of 3D manganese oxide/graphene aerogel for supercapacitors

Manganese oxide nanoparticles decorated on 3D reduced graphene oxide aerogels (3D MnO_x/rGO_ae) for neutral electrochemical capacitors were successfully produced by a rapid microwave reduction process within 20 s.

Reduced graphene oxide-mediated synthesis of Mn3O4 nanomaterials for an asymmetric supercapacitor cell

Herein, Mn₃O₄/reduced graphene oxide composites are prepared via a facile solution-phase method for supercapacitor application. Transmission electron microscopy results reveal the uniform distribution of Mn₃O₄ nanoparticles on graphene layers. The morphology of the Mn₃O₄ nanomaterial is changed by introducing the reduced graphene oxide during the preparation process. An asymmetric supercapacitor cell based on the Mn₃O₄/reduced graphene oxide composite with the weight ratio of 1 : 1 exhibits relatively superior charge storage properties with higher specific capacitance and larger energy density compared with those of pure reduced graphene oxide or Mn₃O₄. More importantly, the long-term stability of the composite with more than 90.3% capacitance retention after 10 000 cycles can ensure that the product is widely applied in energy storage devices.

The existence presence of rGO can affect the morphology of an Mn₃O₄/rGO composite, and the asymmetric supercapacitor cell created with this composite exhibits good capacitive performance.

Synthesis of graphene-transition metal oxide hybrid nanoparticles and their application in various fields

Single layer graphite, known as graphene, is an important material because of its unique two-dimensional structure, high conductivity, excellent electron mobility and high surface area. To explore the more prospective properties of graphene, graphene hybrids have been synthesised, where graphene has been integrated with other important nanoparticles (NPs). These graphene-NP hybrid structures are particularly interesting because after hybridisation they not only display the individual properties of graphene and the NPs, but also they exhibit further synergistic properties. Reduced graphene oxide (rGO), a graphene-like material, can be easily prepared by reduction of graphene oxide (GO) and therefore offers the possibility to fabricate a large variety of graphene-transition metal oxide (TMO) NP hybrids. These hybrid materials are promising alternatives to reduce the drawbacks of using only TMO NPs in various applications, such as anode materials in lithium ion batteries (LIBs), sensors, photocatalysts, removal of organic pollutants, etc. Recent studies have shown that a single graphene sheet (GS) has extraordinary electronic transport properties. One possible route to connecting those properties for application in electronics would be to prepare graphene-wrapped TMO NPs. In this critical review, we discuss the development of graphene-TMO hybrids with the detailed account of their synthesis. In addition, attention is given to the wide range of applications. This review covers the details of graphene-TMO hybrid materials and ends with a summary where an outlook on future perspectives to improve the properties of the hybrid materials in view of applications are outlined.

Charge storage mechanisms of electrospun Mn3O4 nanofibres for high-performance supercapacitors

Mixed oxidation states of manganese oxides are widely used as the electrodes in supercapacitors due to their high theoretical pseudocapacitances.

Prepared MnO2 with different crystal forms as electrode materials for supercapacitors: experimental research from hydrothermal crystallization process to electrochemical performances

The aim of this study was to prepare manganese dioxide with different crystal forms through hydrothermal treatment of MnSO₄·H₂O–KMnO₄ precursors at various precursor ratios, temperatures, time periods, and pH values.

Sonochemical preparation of a ytterbium oxide/reduced graphene oxide nanocomposite for supercapacitors with enhanced capacitive performance

Decoration of graphene with different nanostructures can result in fundamental advancements in versatile technologies, especially in the fast growing fields of catalysts, sensors and energy storage.

Facile one-step synthesis of Co(OH)2 microsphere/graphene composites for an efficient supercapacitor electrode material

A simple one-step hydrothermal method is developed for the synthesis of flower-like Co(OH)₂ microspheres/graphene composites, which exhibit an excellent electrochemical performance.

Nanoarchitectured graphene-based supercapacitors for next-generation energy-storage applications

Tremendous development in the field of portable electronics and hybrid electric vehicles has led to urgent and increasing demand in the field of high-energy storage devices. In recent years, many research efforts have been made for the development of more efficient energy-storage devices such as supercapacitors, batteries, and fuel cells. In particular, supercapacitors have great potential to meet the demands of both high energy density and power density in many advanced technologies. For the last half decade, graphene has attracted intense research interest for electrical double-layer capacitor (EDLC) applications. The unique electronic, thermal, mechanical, and chemical characteristics of graphene, along with the intrinsic benefits of a carbon material, make it a promising candidate for supercapacitor applications. This Review focuses on recent research developments in graphene-based supercapacitors, including doped graphene, activated graphene, graphene/metal oxide composites, graphene/polymer composites, and graphene-based asymmetric supercapacitors. The challenges and prospects of graphene-based supercapacitors are also discussed.

Co9S8nanoflakes on graphene (Co9S8/G) nanocomposites for high performance supercapacitors

Co₉S₈/graphene nanocomposites (Co₉S₈/G) at various concentrations of graphene and Co₉S₈were prepared and tested for its electrochemical behaviour for supercapacitors.

One-dimensional ZnO/Mn3O4 core/shell nanorod and nanotube arrays with high supercapacitive performance for electrochemical energy storage

A facile electrochemical method to prepare one-dimensional ZnO/Mn₃O₄ core/shell nanorod and nanotube arrays is reported and their applications as electrodes in supercapacitors are examined. The as-prepated ZnO/Mn₃O₄ core/shell nanoarray structures exhibit excellent capacitance and superior rate performance.