Silver nanoparticles/multi walled carbon nanotubes nanocomposite modified electrode: Voltammetric determination of clonazepam

Synthesis of superparamagnetic Fe3O4-graphene oxide-based material for the photodegradation of clonazepam

The global concern over water pollution caused by contaminants of emerging concern has been the subject of several studies due to the complexity of treatment. Here, the synthesis of a graphene oxide-based magnetic material (GO@Fe3O4) produced according to a modified Hummers' method followed by a hydrothermal reaction was proposed; then, its application as a photocatalyst in clonazepam photo-Fenton degradation was investigated. Several characterization analyses were performed to analyze the structure, functionalization and magnetic properties of the composite. A 23 factorial design was used for the optimization procedure to investigate the effect of [H2O2], GO@Fe3O4 dose and pH on clonazepam degradation. Adsorption experiments demonstrated that GO@Fe3O4 could not adsorb clonazepam. Photo-Fenton kinetics showed that total degradation of clonazepam was achieved within 5 min, and the experimental data were better fitted to the PFO model. A comparative study of clonazepam degradation by different processes highlighted that the heterogeneous photo-Fenton process was more efficient than homogeneous processes. The radical scavenging test showed that O 2 · - was the main active free radical in the degradation reaction, followed by hydroxyl radicals (•OH) and holes (h+) in the valence layer; accordingly, a mechanism of degradation was proposed to describe the process.

Advances of Drugs Electroanalysis Based on Direct Electrochemical Redox on Electrodes: A Review

The strong development of mankind is inseparable from the proper use of drugs, and the electroanalytical research of drugs occupies an important position in the field of analytical chemistry. This review mainly elaborates the research progress of drugs electroanalysis based on direct electrochemical redox on various electrodes for the recent decade from 2011 to 2021. At first, we summarize some frequently used electrochemical data processing and electrochemical mechanism research derivation methods in the literature. Then, according to the drug therapeutic and application/usage purposes, the research progress of drugs electrochemical analysis is classified and discussed, where we focus on drugs electrochemical reaction mechanism. At the same time, the comparisons of electrochemical sensing performance of the drugs on various electrodes from recent studies are listed, so that readers can more intuitively compare and understand the electroanalytical sensing performance of each modified electrode for each of the drug. Finally, this review discusses the shortcomings and prospects of the drugs electroanalysis based on direct electrochemical redox research.

Emerging trends in point-of-care sensors for illicit drugs analysis

Consumption of illicit narcotic drugs and fatal or criminal activities under their influence has become an utmost concern worldwide. These drugs influence an individual's feelings, perceptions, and emotions by altering the state of consciousness and thus can result in serious safety breaches at critical workplaces. Point-of-care drug-testing devices have become the need-of-the-hour for many sections such as the law enforcement agencies, the workplaces, etc. for safety and security. This review focuses on the recent progress on various electrochemical and optical nanosensors developed for the analysis of the most common illicit drugs (or their metabolites) such as tetrahydrocannabinol (THC), cocaine (COC), opioids (OPs), amphetamines & methamphetamine, and benzodiazepine (BZDs). The paper also highlights the sensitivity and selectivity of various sensing modalities along with evolving parameters such as real-time monitoring and measurement via a smart user interface. An overall outlook of recent technological advances in point of care (POC) devices and guided insights and directions for future research is presented.

Antifouling Strategies for Electrochemical Biosensing: Mechanisms and Performance toward Point of Care Based Diagnostic Applications

Although there exist numerous established laboratory-based technologies for sample diagnostics and analyte detection, many medical and forensic science applications require point of care based platforms for rapid on-the-spot sample analysis. Electrochemical biosensors provide a promising avenue for such applications due to the portability and functional simplicity of the technology. However, the ability to develop such platforms with the high sensitivity and selectivity required for analysis of low analyte concentrations in complex biological samples remains a paramount issue in the field of biosensing. Nonspecific adsorption, or fouling, at the electrode interface via the innumerable biomolecules present in these sample types (i.e., serum, urine, blood/plasma, and saliva) can drastically obstruct electrochemical performance, increasing background "noise" and diminishing both the electrochemical signal magnitude and specificity of the biosensor. Consequently, this review aims to discuss strategies and concepts used throughout the literature to prevent electrode surface fouling in biosensors and to communicate the nature of the antifouling mechanisms by which they operate. Evaluation of each antifouling strategy is focused primarily on the fabrication method, experimental technique, sample composition, and electrochemical performance of each technology highlighting the overall feasibility of the platform for point of care based diagnostic/detection applications.

Nano-sized Metal and Metal Oxide Modified Electrodes for Pharmaceuticals Analysis

:

The electrochemical analysis offers a number of important advantages such as providing information on pharmaceuticals analysis and their in vivo redox processes and pharmacological activity. The interest in developing electrochemical sensing devices for use in clinical assays is growing rapidly. Metallic nanoparticles can be synthesized and modified with various chemical functional groups, which allow them to be conjugated with antibodies, ligands, and drugs of interest.

:

In this article, the novel developments to enhance the performance of sensor modified with metal nanoparticles of pharmaceuticals were reviewed. A discussion of the properties of metal nanostructures and their application in drug analysis is presented. Their application as a modifier agent in determining low levels of drugs in pharmaceutical dosage forms and biological samples is discussed. It has been found that the electrocatalytic effect of the electrode, sensitivity and selectivity were increased using various working electrodes modified with nano-sized metal, metal oxide and metal/metal oxide particles.

A novel technique for simultaneous determination of drugs using magnetic nanoparticles based dispersive micro-solid-phase extraction in biological fluids and wastewaters

In this study, a novel method was developed to measure acidic and basic drugs in biological and wastewater samples. The method used magnetic nanoparticles based on Vortex-Assisted Dispersive Micro-Solid Phase Extraction (SPE) and then identifying with HPLC-UV. The magnetic nanoparticle (Fe₃O₄@SiO₂@Kit-6@NH₂) has been used as an efficient adsorbent for the extraction of acidic and basic drugs ibuprofen (IFB), fenoprofen calcium (FPC), methocarbamol (MTC), and clonazepam (CZP). The magnetic nanoparticle was characterized by techniques including SEM, XRD, EDX, and FT-IR. The effect of various parameters in the V-D-μ-SPE method was studied completely through the design of the response surface methodology (RSM) of the Box–Behnken design (BBD) based response method and the utility function. The parameters affecting the extraction efficiency were optimized including sample pH, adsorbent amount, absorption time, the salt concentration in the sample solution, CTAB of concentration, desorption time, and the volume of an eluent. After optimization, the limit of detection and calibration curve in the linear range were obtained 0.062–0.32 μg L⁻¹ and 0.1–800 μg L⁻¹, respectively. Its linear correlation was R²> 0.9951. The relative standard deviation (n = 5) was between 2.4% and 5.1%. Finally, this method was used to determine target analytes in human serum, urine, and wastewater.•

In this study, for the first time, a novel method for the determination of some drugs from human serum, urine, and wastewater samples.

•

The Synthesized Fe₃O₄@SiO₂@Kit-6@NH₂ NPs based V-D-μ-SPE was characterized by techniques including SEM, XRD, EDX, and FT-IR.

•

The effects of various parameters in the V-D-μ-SPE methods were studied through the design of the RSM of BBD.

Recent advances in electroanalytical methods for the therapeutic monitoring of antiepileptic drugs: A comprehensive review

Frequency of seizures is often managed by a wide group of antiepileptic drugs. Regarding the pharmacokinetic variability, narrow targeted range, and difficulty of detecting signs of toxicity based on laboratory responses, therapeutic monitoring of antiepileptic drugs can play a pivotal role in optimizing the drug dosage. Electrochemical sensors and biosensors can facilitate analysis of these drugs due to their unique advantages such as fast analysis, sensitivity, selectivity, and low cost. This review article, for the first time, describes the recent advances in electrochemical sensors and biosensors developed for the analysis of antiepileptic drugs. General electrochemical measuring techniques and types of applied electrode substrates were described first. To simplify the work, various chemical and biological modifiers applied to improve the sensitivity and selectivity of the sensors were classified and explained briefly. Finally, the future prospective on the development of electrochemical platforms in the quantification of antiepileptic drugs will be presented.

A batch and cloud point extraction kinetic spectrophotometric method for determining trace and ultra trace amounts of Benzodiazepine drugs (Clonazepam and Nitrazepam) in pure and pharmaceutical preparations

Utilizing the batch Diazotization coupling reaction and the cloud point extraction kinetic spectrophotometric method, trace and Ultra trace amounts from reducing Nitrazepam and Clonazepam were evaluated by way of using 2,5-dimethoxyaniline as a new Chromogenic reagent to give colored products (red) in acidic medium which have a maximum absorption at 500 and 502 nm, respectively. In the work, the analytical data of batch and cloud point for Nitrazepam and Clonazepam depended on initial rate and fixation time. This involved concentrations of (0,3-9), (0.05-1.2), (0.5-10) and (0.025-1) µg mL−1, as well as molar absorptivity of (3.8×104), (3.1×105) (3.39×104) and (3.47×105) L mol−1 cm−1. According to our results, Sandall’s sensitivity were (0.0074), (0.0009), (0.0092) and (0.0009) µg cm−2, while detection limits were (0.055) and (0.069) µg mL−1, (8.4) and (8.5) ng mL−1. In addition, the measurements enrichment factors were (33.33) and (50), while preconcentration factors were (8) and (9.9), respectively. The reaction of Nitrazepam and Clonazepam with 2,5-dimethoxyaniline were a pseudo first order according to kinetic studies. The proposed methods are not affected by existence of excipients so the methods can be applied successfully for determination of Nitrazepam and Clonazepam in pharmaceutical preparations.

A ternary nanocomposite based on nickel(iii) oxide@f-CNF/rGO for efficient electrochemical detection of an antipsychotic drug (Klonopin) in biological samples

The formation of the Ni₂O₃@f-CNF/rGO composite for the electrochemical detection of KNP.

Screen printed carbon electrode modified with a copper@porous silicon nanocomposite for voltammetric sensing of clonazepam

The work describes an electrochemical sensor for the determination of the tranquilizer clonazepam (CZP) in serum and pharmaceutical preparations. A screen printed carbon electrode (SPCE) was modified with copper nanoparticles anchored on porous silicon (PSi). The surface of the SPCEs modified with the Cu/PSi nanostructure was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoemission spectroscopy, energy dispersive X-ray spectroscopy and field-emission scanning electron microscopy. Cyclic and differential pulse voltammetric methods were used for the electrochemical studies and electrochemical detection, respectively. Several parameters controlling the performance of the modified SPCE were optimized. The peak current values (at a potential of -0.52 V) were used to construct calibration plots. Under the optimum conditions, the calibration plot is linear in the 0.05-7.6 μM CZP concentration range, and the detection limit is 15 nM. The sensor is reproducible, repeatable, highly selective and sensitive. It was successfully applied to the determination of CPZ in spiked serum and in drugs. Graphical abstract Scheme of electrochemical reduction of clonazepam on the designed copper@porous silicon modified screen printed carbon electrode (CuNPs/PSi/SPCE). This electrode was employed for the determination of clonazepam in tablets and human blood plasma using differential pulse voltammetry.

Biosensors in Drug Discovery and Drug Analysis

Background:

The determination of drugs in pharmaceutical formulations and human biologic fluids is important for pharmaceutical and medical sciences. Successful analysis requires low sensitivity, high selectivity and minimum interference effects. Current analytical methods can detect drugs at very low levels but these methods require long sample preparation steps, extraction prior to analysis, highly trained technical staff and high-cost instruments. Biosensors offer several advantages such as short analysis time, high sensitivity, real-time analysis, low-cost instruments, and short pretreatment steps over traditional techniques. Biosensors allow quantification not only of the active component in pharmaceutical formulations, but also the degradation products and metabolites in biological fluids. The present review gives comprehensive information on the application of biosensors for drug discovery and analysis. Moreover, this review focuses on the fabrication of these biosensors.

Methods:

Biosensors can be classified as the utilized bioreceptor and the signal transduction mechanism. The classification based on signal transductions includes electrochemical optical, thermal or acoustic. Electrochemical and optic transducers are mostly utilized transducers used for drug analysis. There are many biological recognition elements, such as enzymes, antibodies, cells that have been used in fabricating of biosensors. Aptamers and antibodies are the most widely used recognition elements for the screening of the drugs. Electrochemical sensors and biosensors have several advantages such as low detection limits, a wide linear response range, good stability and reproducibility. Optical biosensors have several advantages such as direct, real-time and label-free detection of many biological and chemical substances, high specificity, sensitivity, small size and low cost. Modified electrodes enhance sensitivity of the electrodes to develop a new biosensor with desired features. Chemically modified electrodes have gained attention in drug analysis owing to low background current, wide potential window range, simple surface renewal, low detection limit and low cost. Modified electrodes produced by modifying of a solid surface electrode via different materials (carbonaceous materials, metal nanoparticles, polymer, biomolecules) immobilization. Recent advances in nanotechnology offer opportunities to design and construct biosensors. Unique features of nanomaterials provide many advantages in the fabrication of biosensors. Nanomaterials have controllable chemical structures, large surface to volume ratios, functional groups on their surface. To develop proteininorganic hybrid nanomaterials, four preparation methods have been used. These methods are immobilization, conjugation, crosslinking and self-assembly. In the present manuscript, applications of different biosensors, fabricated by using several materials, for drug analysis are reviewed. The biosensing strategies are investigated and discussed in detail.

Results:

Several analytical techniques such as chromatography, spectroscopy, radiometry, immunoassays and electrochemistry have been used for drug analysis and quantification. Methods based on chromatography require timeconsuming procedure, long sample-preparation steps, expensive instruments and trained staff. Compared to chromatographic methods, immunoassays have simple protocols and lower cost. Electrochemical measurements have many advantages over traditional chemical analyses and give information about drug quantity, metabolic fate of drugs, and pharmacological activity. Moreover, the electroanalytical methods are useful to determine drugs sensitively and selectivity. Additionally, these methods decrease analysis cost and require low-cost instruments and simple sample pretreatment steps.

Conclusion:

In recent years, drug analyses are performed using traditional techniques. These techniques have a good detection limit, but they have some limitations such as long analysis time, expensive device and experienced personnel requirement. Increased demand for practical and low-cost analytical techniques biosensor has gained interest for drug determinations in medical sciences. Biosensors are unique and successful devices when compared to traditional techniques. For drug determination, different electrode modification materials and different biorecognition elements are used for biosensor construction. Several biosensor construction strategies have been developed to enhance the biosensor performance. With the considerable progress in electrode surface modification, promotes the selectivity of the biosensor, decreases the production cost and provides miniaturization. In the next years, advances in technology will provide low cost, sensitive, selective biosensors for drug analysis in drug formulations and biological samples.

A relative study on sonochemically synthesized mesoporous WS2 nanorods & hydrothermally synthesized WS2 nanoballs towards electrochemical sensing of psychoactive drug (Clonazepam)

In this paper, mesoporous tungsten sulfide electrocatalyst (MP-WS₂) were developed through a facile sonochemical technique (SC) and utilized as an electrocatalyst for the sensitive electrochemical detection of Psychoactive drug. The as-prepared SC-MP-WS₂ NRs and HT-WS₂ NPs (hydrothermally synthesized) were characterized using XRD, Raman, XPS, FESEM, HRTEM, BET, EDX, and electrochemical analysis, which exposed the formation of WS₂ in the form of mesoporous nanorods in shape. Further, the use of the as-developed SC-MP-WS₂ NRs and HT-WS₂ NPs as an electrocatalyst for the detection of clonazepam (CNP). Interestingly, the SC-MP-WS₂ NRs modified screen-printed carbon electrode (SC-MP-WS₂ NRs/SPCE) exhibited an excellent electrocatalytic performance, and enhanced reduction peak current when compared to HT-WS₂ NPs with unmodified electrode. Moreover, as-prepared SC-MP-WS₂ NRs/SPCE displayed wide linear response range (10-551 µM), lower detection limit (2.37 nM) and high sensitivity (24.32 µAµM^-1cm^-2). Furthermore, SC-MP-WS₂ NRs/SPCE showed an excellent selectivity even in the existence of potentially co-interfering compounds. The proposed sensor was successfully applied for the determination of CNP in biological and drug samples with acceptable recovery.

Klonopin assay using modified electrode with multiwalled carbon nanotubes and poly melamine nanocomposite

Developing of cheap, sensitive and stable sensors plays a significant role in pharmaceutical and clinical applications. Considering the effective role of Klonopin (KNP) in the treatment of epilepsy, KNP quantification in its production process for dose adjustments and checking the purity and also after its usage by patents for bioavailability testing and effectiveness assay is vital. In present work, an efficient electrochemical sensor based on poly melamine and multiwalled carbon nanotubes nanocomposite (PMela/CNTs) was constructed which displayed effective electrochemical response toward KNP. Electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and square-wave voltammetry (SWV) experiments were applied for performance evaluation of the PMela/CNTs modified electrode and electrochemical redox behavior of KNP. Distinguish synergetic effect was observed between CNTs and poly melamine in response to KNP electrochemical redox reaction. A linear detection range of 0.05 to 10 μM with the detection limits of 63 nM was achieved for KNP analysis. The practical application of the PMela/CNTs modified electrode revealed satisfactory results for quantification of KNP in biological fluids.

Voltammetric determination of levofloxacin using silver nanoparticles deposited on a thin nickel oxide porous film

The authors describe a simplified chemical precipitation method and silver mirror reaction to synthesize a nanocomposite consiting of silver nanoparticles on a thin and porous nickel oxide film. Placed on a glassy carbon electrode (GCE), it allows for the determination of levofloxacin (LEV) via square wave voltammetry (SWV). Under optimal detection conditions, the voltammetric signal (typically measured at around 0.96 V vs. SCE) increases linearly in the 0.25-100 μM LEV concentration range. And the detection limit was calculated as 27 nM (at S/N = 3). The sensor is highly selective, stable and repeatable. It was applied to the determination of LEV in spiked human serum samples, and the satisfactory results confirm the applicability of this sensor to practical analyses. Graphical abstract Schematic of a two-step method to synthesize a nanocomposite consisting of nickel oxide porous thin-film supported silver nanoparticles. The composite was used for improved voltammetric determination of levofloxacin.

Electrochemical carbon based nanosensors: A promising tool in pharmaceutical and biomedical analysis

Nanotechnology has become very popular in the sensor fields in recent times. It is thought that the utilization of such technologies, as well as the use of nanosized materials, could well have beneficial effects for the performance of sensors. Nano-sized materials have been shown to have a number of novel and interesting physical and chemical properties. Low-dimensional nanometer-sized materials and systems have defined a new research area in condensed-matter physics within past decades. Apart from the aforesaid categories of materials, there exist various materials of different types for fabricating nanosensors. Carbon is called as a unique element, due to its magnificent applications in many areas. Carbon is an astonishing element that can be found many forms including graphite, diamond, fullerenes, and graphene. This review provides an overview of some of the important and recent developments brought about by the application of carbon based nanostructures to nanotechnology for both chemical and biological sensor development and their application in pharmaceutical and biomedical area.

Electrocatalytic oxidation of Epinephrine and Norepinephrine at metal oxide doped phthalocyanine/MWCNT composite sensor

Glassy carbon electrode (GCE) was modified with metal oxides (MO = Fe₃O₄, ZnO) nanoparticles doped phthalocyanine (Pc) and functionalized MWCNTs, and the electrocatalytic properties were studied. Successful synthesis of the metal oxide nanoparticles and the MO/Pc/MWCNT composite were confirmed using FTIR, Raman and SEM techniques. The electrodes were characterized using cyclic voltammetry (CV) technique. The electrocatalytic behaviour of the electrode towards epinephrine (EP) and norepinephrine (NE) oxidation was investigated using CV and DPV. Result showed that GCE-MWCNT/Fe₃O₄/2,3-Nc, GCE-MWCNT/Fe₃O₄29H,31H-Pc, GCE-MWCNT/ZnO/2,3-Nc and GCE-MWCNT/ZnO/29H,31H-Pc electrodes gave enhanced EP and NE current response. Stability study indicated that the four GCE-MWCNT/MO/Pc modified electrodes were stable against electrode fouling effect with the percentage NE current drop of 5.56–5.88% after 20 scans. GCE-MWCNT/Fe₃O₄/29H,31H-Pc gave the lowest limit of detection (4.6 μM) towards EP while MWCNT/ZnO/29H,31H-Pc gave the lowest limit of detection (1.7 μM) towards NE. The limit of detection and sensitivity of the electrodes compared well with literature. Electrocatalytic oxidation of EP and NE on GCE-MWCNT/MO/Pc electrodes was diffusion controlled with some adsorption of electro-oxidation reaction intermediates products. The electrodes were found to be electrochemically stable, reusable and can be used for the analysis of EP and NE in real life samples.

Silver nanoparticle-modified electrode for the determination of nitro compound-containing pesticides

This paper reports the electroanalytical determination of pendimethalin and ethyl parathion by square-wave adsorptive stripping voltammetry using a material comprised of chitosan-stabilized silver nanoparticles to modify a glassy carbon electrode. Under optimized experimental conditions, the peak current was found to vary linearly with the concentration of pendimethalin in the range of 70 to 2000 nmol L(-1) and with concentration of ethyl parathion in the range of 40 to 8000 nmol L(-1). Detection limits of 36 and 40 nmol L(-1) were obtained for pendimethalin and ethyl parathion, respectively. The silver - nanoparticle-modified electrode was successfully employed for the analysis of pesticides in tap and mineral water (pendimethalin) and in lettuce and honey (ethyl parathion) samples. Pendimethalin recovery was between 94 and 100 %, and ethyl parathion recovery was between 97 and 101 %, indicating no significant matrix interference effects on the analytical results. The accuracy of the electroanalytical methodology using the proposed modified electrode was also compared to that of the UV-vis spectrophotometric method.

New approach to the determination of contaminants of emerging concern in natural water: study of alprazolam employing adsorptive cathodic stripping voltammetry

Contaminants of emerging concern (CECs) are chemicals, including pharmaceutical and personal care products, not commonly monitored in the aquatic environment. Pharmaceuticals are nowadays considered as an important environmental contaminant. Chromatography methods which require expensive equipment and complicated sample pretreatment are used for detection of CECs in natural water. Thus, in this study we proposed a simple, fast, and low-cost voltammetric method as a screening tool for the determination of CECs in natural water prior to chromatography. A case study was conducted with alprazolam (benzodiazepine). The method was optimized and validated in-house. The limit of quantification was 0.4 μg L(-1) for a 120 s preconcentration time. The recoveries ranged from 93 to 120 % for accuracy tests. A further proposal aim was to determine for the first time the occurrence of alprazolam in Brazilian river water and to evaluate its potential use as a marker of contamination by wastewater.