A Cholesterol Biosensor Based on the NIR Electrogenerated-Chemiluminescence (ECL) of Water-Soluble CdSeTe/ZnS Quantum Dots

In Vitro Models for Investigating Intestinal Host-Pathogen Interactions

Infectious diseases are increasingly recognized as a major threat worldwide due to the rise of antimicrobial resistance and the emergence of novel pathogens. In vitro models that can adequately mimic in vivo gastrointestinal physiology are in high demand to elucidate mechanisms behind pathogen infectivity, and to aid the design of effective preventive and therapeutic interventions. There exists a trade-off between simple and high throughput models and those that are more complex and physiologically relevant. The complexity of the model used shall be guided by the biological question to be addressed. This review provides an overview of the structure and function of the intestine and the models that are developed to emulate this. Conventional models are discussed in addition to emerging models which employ engineering principles to equip them with necessary advanced monitoring capabilities for intestinal host-pathogen interrogation. Limitations of current models and future perspectives on the field are presented.

The Peroxidase-like Nanocomposites as Hydrogen Peroxide-Sensitive Elements in Cholesterol Oxidase-Based Biosensors for Cholesterol Assay

Catalytically active nanomaterials, in particular, nanozymes, are promising candidates for applications in biosensors due to their excellent catalytic activity, stability and cost-effective preparation. Nanozymes with peroxidase-like activities are prospective candidates for applications in biosensors. The purpose of the current work is to develop cholesterol oxidase-based amperometric bionanosensors using novel nanocomposites as peroxidase (HRP) mimetics. To select the most electroactive chemosensor on hydrogen peroxide, a wide range of nanomaterials were synthesized and characterized using cyclic voltammetry (CV) and chronoamperometry. Pt NPs were deposited on the surface of a glassy carbon electrode (GCE) in order to improve the conductivity and sensitivity of the nanocomposites. The most HRP-like active bi-metallic CuFe nanoparticles (nCuFe) were placed on a previously nano-platinized electrode, followed by conjugation of cholesterol oxidase (ChOx) in a cross-linking film formed by cysteamine and glutaraldehyde. The constructed nanostructured bioelectrode ChOx/nCuFe/nPt/GCE was characterized by CV and chronoamperometry in the presence of cholesterol. The bionanosensor (ChOx/nCuFe/nPt/GCE) shows a high sensitivity (3960 A·M^-1·m^-2) for cholesterol, a wide linear range (2-50 µM) and good storage stability at a low working potential (-0.25 V vs. Ag/AgCl/3 M KCl). The constructed bionanosensor was tested on a real serum sample. A detailed comparative analysis of the bioanalytical characteristics of the developed cholesterol bionanosensor and the known analogs is presented.

Electrochemiluminescence with semiconductor (nano)materials

Electrochemiluminescence (ECL) is the light production triggered by reactions at the electrode surface. Its intrinsic features based on a dual electrochemical/photophysical nature have made it an attractive and powerful method across diverse fields in applied and fundamental research. Herein, we review the combination of ECL with semiconductor (SC) materials presenting various typical dimensions and structures, which has opened new uses of ECL and offered exciting opportunities for (bio)sensing and imaging. In particular, we highlight this particularly rich domain at the interface between photoelectrochemistry, SC material chemistry and analytical chemistry. After an introduction to the ECL and SC fundamentals, we gather the recent advances with representative examples of new strategies to generate ECL in original configurations. Indeed, bulk SC can be used as electrode materials with unusual ECL properties or light-addressable systems. At the nanoscale, the SC nanocrystals or quantum dots (QDs) constitute excellent bright ECL nano-emitters with tuneable emission wavelengths and remarkable stability. Finally, the challenges and future prospects are discussed for the design of new detection strategies in (bio)analytical chemistry, light-addressable systems, imaging or infrared devices.

Ultrasensitive electrochemiluminescence sensor based on perovskite quantum dots coated with molecularly imprinted polymer for prometryn determination

A highly effective molecularly imprinted electrochemiluminescence sensor was constructed for prometryn determination in environmental and biological samples by using perovskite quantum dots coated with a molecularly imprinted silica layer (MIP/CsPbBr₃-QDs) as the recognition and response element. MIP/CsPbBr₃-QDs were immobilized on a glassy carbon electrode (GCE) through electropolymerization, and the electrochemiluminescence (ECL) response of MIP/CsPbBr₃-QDs could be motivated under the condition of H₂O₂ as co-reactant. ECL signal was selectively quenched with prometryn by hindering electron transfer and directly proportional to the logarithm of prometryn concentration (0.10-500.0 μg/L) with a correlation coefficient of 0.9960. Limits of detection in fish and seawater samples were 0.010 μg/kg and 0.050 μg/L, respectively. Excellent recoveries of 88.0%-106.0% were acquired for fish and seawater samples with a relative standard deviation below 4.2%. The constructed MIECL sensor based on MIP/CsPbBr₃-QDs showed good stability, accuracy, and precision for sensitive detection of prometryn in aquaculture products and environmental samples.

An ultrasensitive electrochemiluminescence biosensor for the detection of total bacterial count in environmental and biological samples based on a novel sulfur quantum dot luminophore

An electrochemiluminescence sensor for total bacterial count detection based on sulfur quantum dots with β-nicotinamide adenine dinucleotide as an important parameter.

An ultra-sensitive electrochemiluminescence probe based on ternary nanocomposite and boron nitride quantum dots for detection of diazinon

A new enzyme-free electrochemiluminescence (ECL) pesticide sensor was fabricated based on ternary nanocomposite of ruthenium nanoparticles/silver nanoparticles/graphene oxide on the surface of glassy carbon electrode for ultratrace determination of diazinon. Due to some drawbacks of enzyme-based sensors such as enzyme instability at elevated temperature, humidity, changes of pH, and high price of the enzyme, the use of enzyme was omitted in the construction of the developed sensor. The silver nanoparticles with good electrocatalytic proficiency as a signal improving agent and tris(2,2bipyridine) ruthenium(II) as a popular luminophore were uniformly deposited on the surface of the prepared graphene oxide/GC electrode at nanoscale. Boron nitride quantum dots as an efficient co-reactant created the superior efficiency in amplifying the ECL intensity of the ruthenium-based ECL system. The prepared electrode was utilized for the detection of diazinon via the robust ECL method. For the present sensor, a wide linear dynamic range and low detection limit were achieved (3.0 × 10^-15 to 6.5 × 10^-9 M and 9.5 × 10^-16 M, respectively). The obtained results confirmed the fabrication of the robust ECL probe, which is characterized by the cooperative effect of silver nanoparticles and the attached luminophore species. The main advantage of the presented sensor was that the samples could be diluted so that the effect of the interference species was negligible. Due to excellent properties toward accurate determination of diazinon, the ECL sensor as a new practical platform was applied for quantitative detection of diazinon in some real samples.

Nanocomposite of CuInS/ZnS and Nitrogen-Doped Graphene Quantum Dots for Cholesterol Sensing

In this paper, nitrogen graphene quantum dots (N-GQDs) and copper indium sulfide/zinc sulfide (CIS/ZnS) QDs were synthesized via facile hydrothermal and aqueous solution routes, respectively. Herein, a fluorescent nanocomposite has been synthesized between N-GQDs and CIS/ZnS QDs in an aqueous phase. This nanocomposite was characterized by photoluminescence, Raman, and ultraviolet-visible (UV-vis) spectroscopies, high-resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD). This fluorescent nanocomposite was developed as a highly sensitive, selective nonenzymatic cholesterol optical biosensor in 0.312-5 mM cholesterol. HRTEM micrographs confirmed the preparation of CIS/ZnS QDs and N-GQDs with average diameters of 3 and 5 nm, respectively. The as-prepared NG/CIS/ZnS QD nanocomposite had a high sensitivity for cholesterol with a wide linear range of concentration of 0.312-5 mM with an excellent correlation coefficient (R 2) of 0.9688 and limit of detection (LOD) of 0.222 mM.

On-Site Colorimetric Detection of Cholesterol Based on Polypyrrole Nanoparticles

Herein, we report a facile method for cholesterol detection by coupling the peroxidase-like activity of polypyrrole nanoparticles (PPy NPs) and cholesterol oxidase (ChOx). ChOx can catalyze the oxidation of cholesterol to produce H₂O₂. Subsequently, PPy NPs, as a nanozyme, induce the reaction between H₂O₂ and 3,3',5,5'-tetramethylbenzidine (TMB). Under optimal conditions, the increase is proportional to cholesterol with concentrations from 10 to 800 μM in absorbance of TMB at 652 nm. The linear range for cholesterol is 10-100 μM, with a detection limit of 3.5 μM. This reported method is successfully employed for detection of cholesterol in human serum. The recovery percentage is ranged within 96-106.9%. Furthermore, we designed a facile and simple portable assay kit using the proposed system, realizing the on-site semiquantitative and visual detection of cholesterol in human serum. The cholesterol content detected from the portable assay kit were closely matching those obtained results from solution-based assays, thereby holding great potential in clinical diagnosis and health management.

Graphene quantum dot electrochemiluminescence increase by bio-generated H2O2 and its application in direct biosensing

In this study, a novel signal-increase electrochemiluminescence (ECL) biosensor has been developed for the detection of glucose based on graphene quantum dot/glucose oxidase (GQD/GOx) on Ti foil. The proposed GQD with excellent ECL ability is synthesized through a green one-step strategy by the electrochemical reduction of graphene oxide quantum dot. Upon the addition of glucose, GOx can catalytically oxidize glucose and the direct electron transfer between the redox centre of GOx and the modified electrode also has been realized, which results in the bio-generated H₂O₂ for ECL signal increase in GQD and realizes the direct ECL detection of glucose. The signal-increase ECL biosensor enables glucose detection with high sensitivity reaching 5 × 10^-6 mol l^-1 in a wide linear range from 5 × 10^-6 to 1.5 × 10^-3 mol l^-1. Additionally, the fabrication process of such GQD-based ECL biosensor is also suitable to other biologically produced H₂O₂ system, suggesting the possible applications in the sensitive detection of other biologically important targets (e.g. small molecules, protein, DNA and so on).

Enzymatic Reactions in a Lab-on-Valve System: Cholesterol Evaluations

The micro sequential injection analysis / lab-on-valve (µSIA-LOV) system is a miniaturized SIA system resulting from the implementation of a lab-on-valve (LOV) atop of the selection valve. It integrates the detection cell and the sample processing channels into the same device, promoting the reduction of reagent consumption and waste generation, the improvement of the versatility, and the reduction of the time of analysis. All of these characteristics are really relevant to the implementation of enzymatic reactions. Additionally, the evaluation of cholesterol in serum samples is widely relevant in clinical diagnosis, since higher values of cholesterol in human blood are actually an important risk factor for cardiovascular problems. An automatic methodology was developed based on the µSIA-LOV system in order to evaluate its advantages in the implementation of enzymatic reactions performed by cholesterol esterase, cholesterol oxidase and peroxidase. Considering these reactions, the developed methodology was also used for the evaluation of cholesterol in human serum samples, showing reliable and accurate results. The developed methodology presented detection and quantification limits of 1.36 and 4.53 mg dL⁻¹ and a linear range up to 40 mg dL⁻¹. This work confirmed that this µSIA-LOV system is a simple, rapid, versatile, and robust analytical tool for the automatic implementation of enzymatic reactions performed by cholesterol esterase, cholesterol oxidase, and peroxidase. It is also a useful alternative methodology for the routine determinations of cholesterol in real samples, even when compared with other automatic methodologies.

In-Situ imaging detection of cell membrane and intracellular cholesterol via cascade reactions

Herein, an effective membrane-to-intracellular cholesterol detection strategy was designed based on cascade reactions. A biochip array was firstly fabricated by consecutively immobilizing luminol modified gold nanoparticles (Au@luminol), soybean peroxidase (SBP) and cholesterol oxidase (ChoX) on the cellulose acetate (CA) membrane functionalized home-made micropore array. When cholesterol existed, it was oxidized by ChoX generating H₂O₂, which further triggered the CL reaction under the SBP catalysis, the CL signals were collected by a charge-coupled device (CCD). The proposed strategy exhibited a wide linear range from 0.12 μM to 1000 μM and relatively low detection limit (LOD) of 0.08 μM. Furthermore，it could be used to in-situ detect membrane cholesterol and intracelluar esterified cholesterol in HepG2 cells. After activated HepG2 cells were added to the modified biochip, membrane cholesterol was detected directly. Intracelluar esterified cholesterol was detected through the introduction of triton X-100 and cholesteryl esterase (ChoE). Additionally, the cholesterol content in cells was changed after stimulated by drugs, such as apolipoprotein A-I (ApoA-I), pitavastatin or probucol. The correlation of the CL signal with the amount of cholesterol confirmed that our strategy was feasible to simultaneously detect membrane and intracellular cholesterol at different cellular states. The proposed strategy exhibited excellent sensitivity, selectivity, stability, and reproducibility in a simple, cheap way, which opened a new door for studying clinic treatment of the cholesterol-related diseases.

A mechanochemically synthesized porous organic polymer derived CQD/chitosan–graphene composite film electrode for electrochemiluminescence determination of dopamine

Herein, we explore a new carbon source for preparation of carbon quantum dots (CQDs) with controllable composition using a porous organic polymer (POP) derived porous carbon via a nitric acid oxidation method. The POP used for the preparation of CQDs was synthesized by mechanochemical Friedel–Crafts alkylation under solvent free conditions. Using the as-prepared CQDs, we develop a simple and effective electrochemiluminescence (ECL) detection method for dopamine (DA) using a CQD/chitosan–graphene composite modified glassy carbon electrode (GCE). Both the electrochemical and ECL behaviors were studied in detail with ammonium persulfate as a coreactant. The complementary structure and synergistic function of the composite give the ECL sensor special properties. Apart from the high stability, it also presents good repeatability and high sensitivity to DA with a wide linear range from 0.06 to 1.6 μM. And a satisfactory detection limit of 0.028 μM (S/N = 3) was achieved for the prepared sensor. Furthermore, the ECL also shows high selectivity toward DA with an excellent interference resistance ability at a high concentration ratio of 100 (C_interference : C_DA = 100). In addition, the ECL sensor was successfully applied for effective detection and quantitative analysis of the actual dopamine in human body fluids for disease diagnosis and pathological studies.

CQDs were obtained from a POP derived porous carbon via nitric acid oxidation. CQDs/CG composite film with special properties were fabricated and used for ECL detection of DA in human body fluids.

Nanomaterial-based biosensors for measurement of lipids and lipoproteins towards point-of-care of cardiovascular disease

Cardiovascular disease (CVD) has become the primary cause of global deaths and inflicts an enormous healthcare burden on both developed and developing countries. Frequent monitoring of CVD-associated risk factors such as the level of lipids (e.g., triglyceride (TG) and total cholesterol (TC)) and lipoproteins (e.g., low-density lipoprotein (LDL) and high-density lipoprotein (HDL)) can effectively help prevent disease progression and improve clinical outcomes. However, measurement of these risk factors is generally integrated into an automated analyzer, which is prohibitively expensive and highly instrument-dependent for routine testing in primary care settings. As such, a variety of rapid, simple and portable nanomaterial-based biosensors have been developed for measuring the level of lipids (TG and TC) and lipoproteins (LDL and HDL) towards the management of CVD at the point-of-care (POC). In this review, we first summarize traditional methods for measurement of lipids and lipoproteins, and then present the latest advances in developing nanomaterial-based biosensors that can potentially monitor the risk factors of CVD at the POC.

Recent advances in designing nanomaterial based biointerfaces for electrochemical biosensing cardiovascular biomarkers

Early diagnosis of cardiovascular disease (CVD) is critically important for successful treatment and recovery of patients. At present, detection of CVD at early stages of its progression becomes a major issue for world health. The nanoscale electrochemical biosensors exhibit diverse outstanding properties, rendering them extremely suitable for the determination of CVD biomarkers at very low concentrations in biological fluids. The unique advantages offered by electrochemical biosensors in terms of sensitivity and stability imparted by nanostructuring the electrode surface together with high affinity and selectivity of bioreceptors have led to the development of new electrochemical biosensing strategies that have introduced as interesting alternatives to conventional methodologies for clinical diagnostics of CVD. This review provides an updated overview of selected examples during the period 2005-2018 involving electrochemical biosensing approaches and signal amplification strategies based on nanomaterials, which have been applied for determination of CVD biomarkers. The studied CVD biomarkers include AXL receptor tyrosine kinase, apolipoproteins, cholesterol, C-reactive protein (CRP), D-dimer, fibrinogen (Fib), glucose, insulin, interleukins, lipoproteins, myoglobin, N-terminal pro-B-type natriuretic peptide (BNP), tumor necrosis factor alpha (TNF-α) and troponins (Tns) on electrochemical transduction format. Identification of new specific CVD biomarkers, multiplex bioassay for the simultaneous determination of biomarkers, emergence of microfluidic biosensors, real-time analysis of biomarkers and point of care validation with high sensitivity and selectivity are the major challenges for future research.

Combined electrochemiluminescent and electrochemical immunoassay for interleukin 6 based on the use of TiO2 mesocrystal nanoarchitectures

A dual-responsive sandwich-type immunosensor is described for the detection of interleukin 6 (IL-6) by combining electrochemiluminescent (ECL) and electrochemical (EC) detection based on the use of two kinds of TiO₂ mesocrystal nanoarchitectures. A composite was prepared from TiO₂ (anatase) mesocages (AMCs) and a carboxy-terminated ionic liquid (CTIL) and then placed on a glassy carbon electrode (GCE). In the next step, the ECL probe Ru(bpy)₃(II) and antibody against IL-6 (Ab₁) were immobilized on the GCE. Octahedral anatase TiO₂ mesocrystals (OAMs) served as the matrix for immobilizing acid phosphatase (ACP) and secondary antibody (Ab₂) labeled with horseradish peroxidase (HRP) to form a bioconjugate of type Ab₂-HRP/ACP/OAMs. It was self-assembled on the GCE by immunobinding. 1-Naphthol, which is produced in-situ on the surface of the GCE due to the hydrolysis of added 1-naphthyl phosphate by ACP, is oxidized by HRP in the presence of added H₂O₂. This results in an electrochemical signal (typically measured at 0.4 V vs. Ag/AgCl) that increases linearly in the 10 fg·mL^-1 to 90 ng·mL^-1 IL-6 concentration range with a detection limit of 0.32 fg·mL^-1. Secondly, the oxidation product of 1-naphthol quenches the ECL emission of Ru(bpy)₃²⁺. This leads to a decrease in ECL intensity which is linear in the 10 ag·mL^-1 to 90 ng·mL^-1 concentration range, with a detection limit of 3.5 ag·mL^-1. The method exhibits satisfying selectivity and good reproducibility which demonstrates its potential in clinical testing and diagnosis. Graphical abstract A dual-responsive sandwich-type immunosensor was fabricated for the detection of interleukin 6 by combining electrochemiluminescence and electrochemical detection based on the use of two kinds of TiO₂ mesocrystal nanoarchitectures.

Electrochemiluminescence Detection of Escherichia coli O157:H7 Based on a Novel Polydopamine Surface Imprinted Polymer Biosensor

In this paper, a facilely prepared electrochemiluminescence (ECL) biosensor was developed for Escherichia coli O157:H7 quantitative detection based on a polydopamine (PDA) surface imprinted polymer (SIP) and nitrogen-doped graphene quantum dots (N-GQDs). N-GQDs with a high quantum yield of 43.2% were synthesized. The uniform PDA SIP film for E. coli O157:H7 was established successfully with a facile route. The dopamine and target bacteria were electropolymerized directly on the electrode. After removal of the E. coli O157:H7 template, the established PDA SIP can selectively recognize E. coli O157:H7. Accordingly, E. coli O157:H7 polyclonal antibody (pAb) was labeled with N-GQDs. The bioconjugation of SIP-E. coli O157:H7/pAb-N-GQDs can generate intensive ECL irradiation with K₂S₂O₈. As a result, E. coli O157:H7 was detected with the ECL sensing system. Under optimal conditions, the linear relationships between the ECL intensity and E. coli O157:H7 concentration were obtained from 10¹ colony-forming units (CFU) mL^-1 to 10⁷ CFU mL^-1 with a limit of detection of 8 CFU mL^-1. The biosensor based on this SIP film was applied in water sample detection successfully. The N-GQD-based ECL analytical method for E. coli O157:H7 was reported for the first time. The sensing system had high selectivity to the target analyte, provided new opportunities for use, and increased the rate of disease diagnosis and treatment and the prevention of pathogens.

A novel chemiluminescence sensor for sensitive detection of cholesterol based on the peroxidase-like activity of copper nanoclusters

A sensitive and selective chemiluminescence (CL) sensor based on the peroxidase-like activity of copper nanoclusters was established for the detection of cholesterol. Copper nanoclusters catalyse the CL reaction between luminol and H₂O₂. Because H₂O₂ is the oxidative product of cholesterol in the presence of cholesterol oxidase, the oxidation of cholesterol can be quantitatively converted to a CL response by combining the two reactions. The proposed method is simple and can be completed in a few minutes with high sensitivity. Under the optimal conditions, the CL intensity was proportional to the concentration of cholesterol over a wide range of 0.05-10 mM, with a detection limit of 1.5 μM. Furthermore, the method was successfully applied to determine cholesterol in milk powder and human serum with satisfactory accuracy and precision. This method expands the applications of nano-mimic enzymes in the field of CL-based sensors.

Building a Three-Dimensional Nano-Bio Interface for Aptasensing: An Analytical Methodology Based on Steric Hindrance Initiated Signal Amplification Effect

The development of novel detection methodologies in electrochemiluminescence (ECL) aptasensor fields with simplicity and ultrasensitivity is essential for constructing biosensing architectures. Herein, a facile, specific, and sensitive methodology was developed unprecedentedly for quantitative detection of microcystin-LR (MC-LR) based on three-dimensional boron and nitrogen codoped graphene hydrogels (BN-GHs) assisted steric hindrance amplifying effect between the aptamer and target analytes. The recognition reaction was monitored by quartz crystal microbalance (QCM) to validate the possible steric hindrance effect. First, the BN-GHs were synthesized via self-assembled hydrothermal method and then applied as the Ru(bpy)₃²⁺ immobilization platform for further loading the biomolecule aptamers due to their nanoporous structure and large specific surface area. Interestingly, we discovered for the first time that, without the aid of conventional double-stranded DNA configuration, such three-dimensional nanomaterials can directly amplify the steric hindrance effect between the aptamer and target analytes to a detectable level, and this facile methodology could be for an exquisite assay. With the MC-LR as a model, this novel ECL biosensor showed a high sensitivity and a wide linear range. This strategy supplies a simple and versatile platform for specific and sensitive determination of a wide range of aptamer-related targets, implying that three-dimensional nanomaterials would play a crucial role in engineering and developing novel detection methodologies for ECL aptasensing fields.

Electrochemiluminescent detection of methamphetamine and amphetamine

Direct detection of amphetamine type stimulants (ATSs) including methylamphetamine (MA) in street samples and biological matrices without the need for pretreatment or extraction is a great challenge for forensic drug analysis. Electrochemical techniques, such as electrochemiluminescence (ECL), are promising tools for this area of analysis. This contribution focuses on the electrochemical and photochemical properties of [Ru(bpy)3](2+) Nafion composite films and their subsequent use for the detection of ATS in particular MA. Under optimised conditions, the response linearly increased with the concentration over the concentration range 50pM≤[MA]≤1mM while an equivalent dynamic range was obtained for amphetamine with a correlation coefficient of 0.9903 and 0.9948 respectively. The ECL signal was monitored at ∼620nm, representing the λmax for the [Ru(bpy)3](2+) Nafion composite films. This wavelength is shifted by approximately 15nm compared to the photoexcited λmax for the same system. The modified films were formed by direct interaction with the electrode surface without the need for surface modification or chain linkers. This is a major advantage for the fabrication of any sensor as it reduces the synthesis times resulting in more economically and cheaper production costs. This technique is simple, rapid, selective and sensitive, and shows potential for the high-throughput quantitation of ATS as well as possibilities for adaptation with other techniques such as FIA or LC systems.