Carbonate-assisted hydrothermal synthesis of porous hierarchical Co3O4/CuO composites as high capacity anodes for lithium-ion batteries

Copper oxide nanosheets as an effective nanozyme with haloperoxidase-like activity for the colorimetric detection of H2O2 and glucose

Copper oxide nanosheets (CuO NSs) have been successfully obtained by exploiting an effective one-step approach of sugar-blowing method followed by calcination. The nanosheets were characterized by several techniques like X-ray powder diffraction (XRD), Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). Impressively, CuO NSs display haloperoxidase (HPO) like catalytic activity which catalyses the oxidation of chloride ions by H2O2 giving rise to reactive chlorine species (RCS). A sensitive and selective colorimetric sensor was then demonstrated via the oxidation of chromogenic substrate 3,3',5,5'- tetramethylbenzidine (TMB) by the novel nanoenzyme CuO NSs through the generation of RCS for H2O2 and glucose detection with limit of detection of 109 nM and 21 nM in the linear ranges of 4.6 µM to 769 µM and 0.22 µM to 19.57 µM respectively. Additionally, the methodology is validated for the analysis of glucose in real samples.

The Review of Hybridization of Transition Metal-Based Chalcogenides for Lithium-Ion Battery Anodes

Transition metal chalcogenides as potential anodes for lithium-ion batteries have been widely investigated. For practical application, the drawbacks of low conductivity and volume expansion should be further overcome. Besides the two conventional methods of nanostructure design and the doping of carbon-based materials, the component hybridization of transition metal-based chalcogenides can effectively enhance the electrochemical performance owing to the synergetic effect. Hybridization could promote the advantages of each chalcogenide and suppress the disadvantages of each chalcogenide to some extent. In this review, we focus on the four different types of component hybridization and the excellent electrochemical performance that originated from hybridization. The exciting problems of hybridization and the possibility of studying structural hybridization were also discussed. The binary and ternary transition metal-based chalcogenides are more promising to be used as future anodes of lithium-ion batteries for their excellent electrochemical performance originating from the synergetic effect.

Novel rhombus Co3O4-nanocapsule CuO heterohybrids for efficient photocatalytic water splitting and electrochemical energy storage applications

The most appealing and prominent approach for improving energy storage and conversion performance is the development of heterojunction interfaces with efficient and unique metal oxide nanostructures. Rhombus Co₃O₄, nanocapsule CuO, and their heterojunction composites were synthesized using a single-step hydrothermal process. The resulting heterojunction Co₃O₄-CuO nanocomposite outperformed the pristine Co₃O₄ and CuO nanostructures for the electrochemical supercapacitor and water splitting performances. The composite showed 2.4 and 1.3 times higher specific capacitance than the associated pristine CuO and Co₃O₄ nanostructures, while its capacitance was 395 F g^-1 at a current density of 0.5 A g^-1. In addition, long-term GCD results with more than 90% stability and significant capacity retention at higher scan rates revealed the unaffected structures interfaced during the electrochemical reactions. The composite photoelectrode demonstrated more than 20% of photocurrent response with light illumination than the dark condition in water splitting. Co₃O₄-CuO heterostructured composite electrode showed a 0.16 mA/cm² photocurrent density, which is 3.2 and 1.7 times higher than the pristine CuO and Co₃O₄ electrodes, respectively. This performance was attributed to its unique structural composition, high reactive sites, strong ion diffusion, and fast electron accessibility. Electron microscopic and spectroscopic techniques confirmed the properties of the electrodes as well as their morphological properties. Overall, the heterojunction interface with novel rhombus and capsule structured architectures showed good electrochemical performance, suggesting their energy storage and conversion applications.

Superior Electrochemical Performance of Two-Dimensional RGO/Cu/Cu2O Composite as Anode Material for Lithium-Ion Batteries

In recent years, graphene has attracted the interest of many researchers working on LIB anode materials owing to its unique 2D structure, thermal stability, and fast electron transfer. In this work, RGO/Cu/Cu2O nanocomposites were synthesized through a hydrothermal procedure. The as-prepared nanocomposites exhibited a high lithium storage capacity with improved cycling stability and great rate performance, i.e., the discharge capacity was 371.8 mAh/g after 100 cycles at a current density of 500 mA/g. These excellent properties were associated with the sheet structure symmetry of graphene enriched with the multifunctional Cu-Cu2O component, which prevented aggregation and accommodated the volume changes of the anode material during the charge–discharge tests. The RGO/Cu/Cu2O composite conferred to the LIB anode the ability to resist electrode cracking. The approach proposed in this paper can be also generalized for the synthesis of other carbon-based anode materials for LIBs.

The Synergetic Effect Induced High Electrochemical Performance of CuO/Cu2O/Cu Nanocomposites as Lithium-Ion Battery Anodes

Due to the high theoretical capability, copper-based oxides were widely investigated. A facile water bath method was used to synthesis CuO nanowires and CuO/Cu₂O/Cu nanocomposites. Owing to the synergetic effect, the CuO/Cu₂O/Cu nanocomposites exhibit superior electrochemical performance compared to the CuO nanowires. The initial discharge and charge capacities are 2,660.4 mAh/g and 2,107.8 mAh/g, and the reversible capacity is 1,265.7 mAh/g after 200 cycles at 200 mA/g. Moreover, the reversible capacity is 1,180 mAh/g at 800 mA/g and 1,750 mAh/g when back to 100 mA/g, indicating the excellent rate capability. The CuO/Cu₂O/Cu nanocomposites also exhibit relatively high electric conductivity and lithium-ion diffusion coefficient, especially after cycling. For the energy storage mechanism, the capacitive controlled mechanism is predominance at the high scan rates, which is consistent with the excellent rate capability. The outstanding electrochemical performance of the CuO/Cu₂O/Cu nanocomposites indicates the potential application of copper-based oxides nanomaterials in future lithium-ion batteries.

CuO/PbO Nanocomposite: Preparation and Catalysis for Ammonium Perchlorate Thermal Decomposition

In this present article, we reported a facile and efficient milling method to prepare a series of CuO/PbO nanocomposite metal oxides (CuO/PbO NMOs), with CuO/PbO molar ratios of 1:2, 1:1, 1:0.5, and 1:0.25 as a potential catalyst to catalyze the thermal decomposition of ammonium perchlorate (AP). The obtained CuO/PbO NMOs were systematically characterized. X-ray diffraction (XRD), X-ray energy-dispersive spectrometry (EDS) and X-ray photoelectron spectroscopy (XPS) analyses showed that the characteristic peaks of CuO/PbO NMOs were almost the superposition of nano CuO and nano PbO, while few new weak peaks were observed resulting from the lattice defects and new structural arrangements and chemical bonds between nano CuO and nano PbO during a high-energy grinding process. Scanning electron microscopy (SEM) and transition electron microscopy (TEM) observations exhibited that the particle sizes of the CuO/PbO NMOs were distributed in the range of 10-20 nm. Thermogravimetric (TG) analysis coupled with differential scanning calorimetric (DSC) techniques verified that CuO/PbO NMOs with a CuO/PbO molar ratio of 1:1 presented the best catalytic effect for AP thermal decomposition among the other CuO/PbO NMOs, as well as the single nano CuO and nano PbO. The outstanding catalytic performance is mainly reflected as follows: shifting the peak temperature of AP in high-temperature decomposition stages from 441.3 to 347.6 °C, increasing the decomposition heat of AP from 941 to 1711 J/g, and decreasing the Gibbs free energy of AP from 199.8 to 172.1 kJ/mol, supporting the existence of a synergistic catalytic effect between nano CuO and nano PbO.

Aggregation-Morphology-Dependent Electrochemical Performance of Co3O4 Anode Materials for Lithium-Ion Batteries

The aggregation morphology of anode materials plays a vital role in achieving high performance lithium-ion batteries. Herein, Co₃O₄ anode materials with different aggregation morphologies were successfully prepared by modulating the morphology of precursors with different cobalt sources by the mild coprecipitation method. The fabricated Co₃O₄ can be flower-like, spherical, irregular, and urchin-like. Detailed investigation on the electrochemical performance demonstrated that flower-like Co₃O₄ consisting of nanorods exhibited superior performance. The reversible capacity maintained 910.7 mAh·g⁻¹ at 500 mA·g⁻¹ and 717 mAh·g⁻¹ at 1000 mA·g⁻¹ after 500 cycles. The cyclic stability was greatly enhanced, with a capacity retention rate of 92.7% at 500 mA·g⁻¹ and 78.27% at 1000 mA·g⁻¹ after 500 cycles. Electrochemical performance in long-term storage and high temperature conditions was still excellent. The unique aggregation morphology of flower-like Co₃O₄ yielded a reduction of charge-transfer resistance and stabilization of electrode structure compared with other aggregation morphologies.

High-Performance and Reactivation Characteristics of High-Quality, Graphene-Supported SnS2 Heterojunctions for a Lithium-Ion Battery Anode

SnS₂ has received tremendous attention as an anode material for lithium-ion batteries owing to its high theoretical capacity and low cost. However, its applications are limited by its inferior cycling stability and poor rate performance. In this study, graphene@SnS₂ heterojunction nanocomposites are synthesized using a microwave-assisted solvothermal approach on liquid-phase exfoliated graphene (LEGr). Compared with graphene oxides, LEGr layers with an intrinsic atomic structure show extraordinary conductivity and serve as robust substrates for in situ growth of SnS₂ with improved interfacial contact. A LEGr-derived SnS₂ hybrid shows remarkable storage capacity, superior rate capability, and excellent cycling stability. The storage capacity remains at 664 mAh g^-1 after 200 cycles at 300 mA g^-1 current density. Furthermore, lithiation-induced reactivation of LEGr-based SnS₂ is investigated using in situ transmission electron microscopy, giving an in-depth explanation of the electrochemical reaction mechanisms.

Alkyldimethylbetaine-Assisted Development of Hollow Urchinlike CuO Microspheres and Application for High-Performance Battery Anodes

A new approach to develop novel hollow urchinlike copper oxide (CuO) microspheres by the hydrothermal method was reported, and zwitterionic alkyldimethylbetaine (BS) surfactants were employed as templates in the classic copper-ammonia complex systems. Effects of numerous environmental factors on the morphology of CuO particles were studied systematically, in which the concentration and structure of BS predominantly affected the developed CuO materials. It was noticed that hollow urchinlike CuO microspheres were generally formed in the presence of BS regardless of the reaction temperature and time and the source of copper ions. Generally speaking, high concentrations of BS and BS with longer chain length strongly favored the formation of hollow urchinlike CuO microspheres. The microstructures of synthesized CuO particles were studied in detail, and the corresponding formation mechanism of hollow urchinlike CuO microspheres was also proposed based on the selective adsorption of BS on the particular crystal facets of CuO crystals. Moreover, hollow urchinlike CuO microspheres showed excellent performance in the lithium-ion batteries as anode materials with a reversible capability of 511 mA h·g^-1 at 0.1 C after 40 charge-discharge cycles, which was one of the best values of CuO materials reported in this field.

Yucca fern shaped CuO nanowires on Cu foam for remitting capacity fading of Li-ion battery anodes

To remit capacity fading of lithium ion battery (LIB) anodes, freestanding yucca fern shaped CuO nanowires (NWs) on Cu foams are fabricated as anodes by combining facile and scalable anodization of copper foams followed by calcination. The porous and radial configuration of the hierarchical CuO NWs on the Cu foam substrate guarantees the remarkably improved electrochemical performance with durable cycle stability and excellent rate capability compared with CuO NWs on Cu foils. The reversible capacity remains 461.5 mAh/g after 100 repeated cycles at a current density of 100 mA/g, and a capacity of 150.6 mAh/g even at a high rate of 1000 mA/g. By examining the surface morphology of the cycled samples, possible performance fading route is proposed. The 3D CuO NWs network with a porous architecture simutaneously reduces the ion diffusion distances, promotes the electrolyte permeation and electronic conductivity. This novel strategy might open a new window to develop durable CuO based composite anodes for LIBs.

Hollow Porous VOx/C Nanoscrolls as High-Performance Anodes for Lithium-Ion Batteries

Novel hollow porous VO_x/C nanoscrolls are synthesized by an annealing process with the VO_x/octadecylamine (ODA) nanoscrolls as both vanadium and carbon sources. In the preparation, the VO_x/ODA nanoscrolls are first achieved by a two-phase solvothermal method using ammonium metavanadat as the precursor. Upon subsequent heating, the intercalated amines between the vanadate layers in the VO_x/ODA nanoscrolls decompose into gases, which escape from inside the nanoscrolls and leave sufficient pores in the walls. As the anodes of lithium-ion batteries (LIBs), such hollow porous VO_x/C nanoscrolls possess exceedingly high capacity and rate capability (904 mAh g^-1 at 1 A g^-1) and long cyclic stability (872 mAh g^-1 after 210 cycles at 1 A g^-1). The good performance is derived from the unique structural features of the hollow hierarchical porous nanoscrolls with low crystallinity, which could significantly suppress irreversible Li⁺ trapping as well as improve Li⁺ diffusion kinetics. This universal method of annealing amine-intercalated oxide could be widely applied to the fabrication of a variety of porous electrode materials for high-performance LIBs and supercapacitors.