Electrochemical sensing of hydrogen peroxide using Pd@Ag bimetallic nanoparticles decorated functionalized reduced graphene oxide

Designing Nanocomposite-Based Electrochemical Biosensors for Diabetes Mellitus Detection: A Review

This review will unveil the development of a new generation of electrochemical sensors utilizing a transition-metal-oxide-based nanocomposite with varying morphology. There has been considerable discussion on the role of transition metal oxide-based nanocomposite, including iron, nickel, copper, cobalt, zinc, platinum, manganese, conducting polymers, and their composites, in electrochemical and biosensing applications. Utilizing these materials to detect glucose and hydrogen peroxide selectively and sensitively with the correct chemical functionalization is possible. These transition metals and their oxide nanoparticles offer a potential method for electrode modification in sensors. Nanotechnology has made it feasible to develop nanostructured materials for glucose and H2O2 biosensor applications. Highly sensitive and selective biosensors with a low detection limit can detect biomolecules at nanomolar to picomolar (10-9 to 10-12 molar) concentrations to assess physiological and metabolic parameters. By mixing carbon-based materials (graphene oxide) with inorganic nanoparticles, nanocomposite biosensor devices with increased sensitivity can be made using semiconducting nanoparticles, quantum dots, organic polymers, and biomolecules.

Hydrogen Peroxide Electrochemical Sensor Based on Ag/Cu Bimetallic Nanoparticles Modified on Polypyrrole

Due to the strong oxidizing properties of H2O2, excessive discharge of H2O2 will cause great harm to the environment. Moreover, H2O2 is also an energetic material used as fuel, with specific attention given to its safety. Therefore, it is of great importance to explore and prepare good sensitive materials for the detection of H2O2 with a low detection limit and high selectivity. In this work, a kind of hydrogen peroxide electrochemical sensor has been fabricated. That is, polypyrrole (PPy) has been electropolymerized on the glass carbon electrode (GCE), and then Ag and Cu nanoparticles are modified together on the surface of polypyrrole by electrodeposition. SEM analysis shows that Cu and Ag nanoparticles are uniformly deposited on the surface of PPy. Electrochemical characterization results display that the sensor has a good response to H2O2 with two linear intervals. The first linear range is 0.1-1 mM (R2 = 0.9978, S = 265.06 μA/ (mM × cm2)), and the detection limit is 0.027 μM (S/N = 3). The second linear range is 1-35 mM (R2 = 0.9969, 445.78 μA/ (mM × cm2)), corresponding to 0.063 μM of detection limit (S/N = 3). The sensor reveals good reproducibility (σ = 2.104), repeatability (σ = 2.027), anti-interference, and stability. The recoveries of the electrode are 99.84-103.00% (for 0.1-1 mM of linear range) and 98.65-104.80% (for 1-35 mM linear range). Furthermore, the costs of the hydrogen peroxide electrochemical sensor proposed in this work are reduced largely by using non-precious metals without degradation of the sensing performance of H2O2. This study provides a facile way to develop nanocomposite electrochemical sensors.

Enlightening the bimetallic effect of Au@Pd nanoparticles on Ni oxide nanostructures with enhanced catalytic activity

Bimetallic decoration of semiconductor electrodes typically improves catalytic and sensing performances because of a well-claimed synergistic effect. A microscopic and quantitative investigation of such an effect on energy bands of semiconductor can be really useful for further exploitation. Au, Pd and Au@Pd (core@shell) nanoparticles (10-20 nm in size) were synthesized through chemical reduction method and characterized with scanning and transmission microscopy, Rutherford backscattering spectrometry, cyclic voltammetry electrochemical impedance spectroscopy and Mott-Schottky analysis. The nanoparticles have been used to decorate Ni-based nanostructured electrodes with the aim to quantitatively investigate the effect of decoration with mono or bimetallic nanoparticles. Decorated electrodes show higher redox currents than bare ones and a shift in redox peaks (up to 0.3 V), which can be ascribed to a more efficient electron transport and improved catalytic properties. These effects were satisfactorily modeled (COMSOL) employing a nano Schottky junction at the nanoparticle-semiconductor interface, pointing out large energy band bending (up to 0.4 eV), space charge region and local electric field (up to [Formula: see text]) in bimetallic decoration. Sensing test of glucose and H₂O₂ by decorated Ni oxide electrodes were performed to consolidate our model. The presence of bimetallic nanoparticles enhances enormously the electrochemical performances of the material in terms of sensitivity, catalytic activity, and electrical transport. The modification of energy band diagram in semiconductor is analyzed and discussed also in terms of electron transfer during redox reactions.

Highly efficient Ag doped δ-MnO2 decorated graphene: Comparison and application in electrochemical detection of H2O2

Cytotoxic H₂O₂ is an inevitable part of our life, even during this contemporary pandemic COVID-19. Personal protective equipment of the front line fighter against coronavirus could be sterilized easily by H₂O₂ for reuse. In this study, Ag doped δ-MnO₂ nanorods supported graphene nanocomposite (denoted as Ag@δ-MnO₂/G) was synthesized as a nonenzymatic electrochemical sensor for the sensitive detection of H₂O₂. The ternary nanocomposite has overcome the poor electrical conductivity of δ-MnO₂ and also the severe aggregation of Ag NPs. Furthermore, δ-MnO₂/G provided a rougher surface and large numbers of functional groups for doping more numbers of Ag atoms, which effectively modulate the electronic properties of the nanocomposite. As a result, electroactive surface area and electrical conductivity of Ag@δ-MnO₂/G increased remarkably as well as excellent catalytic activity observed towards H₂O₂ reduction. The modified glassy carbon electrode exhibited fast amperometric response time (<2 s) in H₂O₂ determination. The limit of detection was calculated as 68 nM in the broad linear range (0.005-90.64 mM) with high sensitivity of 104.43 µA mM^-1 cm^-2. No significant interference, long-term stability, excellent reproducibility, satisfactory repeatability, practical applicability towards food samples and wastewater proved the efficiency of the proposed sensor.

Electrodes and electrocatalysts for electrochemical hydrogen peroxide sensors: a review of design strategies

H₂O₂ sensing is required in various biological and industrial applications, for which electrochemical sensing is a promising choice among various sensing technologies. Electrodes and electrocatalysts strongly influence the performance of electrochemical H₂O₂ sensors. Significant efforts have been devoted to electrode nanostructural designs and nanomaterial-based electrocatalysts. Here, we review the design strategies for electrodes and electrocatalysts used in electrochemical H₂O₂ sensors. We first summarize electrodes in different structures, including rotation disc electrodes, freestanding electrodes, all-in-one electrodes, and representative commercial H₂O₂ probes. Next, we discuss the design strategies used in recent studies to increase the number of active sites and intrinsic activities of electrocatalysts for H₂O₂ redox reactions, including nanoscale pore structuring, conductive supports, reducing the catalyst size, alloying, doping, and tuning the crystal facets. Finally, we provide our perspectives on the future research directions in creating nanoscale structures and nanomaterials to enable advanced electrochemical H₂O₂ sensors in practical applications.

Electrochemical Methods for the Analysis of Milk

The milk and dairy industries are some of the most profitable sectors in many countries. This business requires close control of product quality and continuous testing to ensure the safety of the consumers. The potential risk of contaminants or degradation products and undesirable chemicals necessitates the use of fast, reliable detection tools to make immediate production decisions. This review covers studies on the application of electrochemical methods to milk (i.e., voltammetric and amperometric) to quantify different analytes, as reported over the last 10 to 15 years. The review covers a wide range of analytes, including allergens, antioxidants, organic compounds, nitrogen- and aldehyde containing compounds, biochemicals, heavy metals, hydrogen peroxide, nitrite, and endocrine disruptors. The review also examines pretreatment procedures applied to milk samples and the use of novel sensor materials. Final perspectives are provided on the future of cost-effective and easy-to-use electrochemical sensors and their advantages over conventional methods.

Facile fabrication of GCE/Nafion/Ni composite, a robust platform to detect hydrogen peroxide in basic medium via oxidation reaction

Nickel particles alone can oxidize hydrogen peroxide but confronts extreme stability problem which imparts a barrier to act as sensor. The porous Nafion bed on glassy carbon electrode (GCE) surface provides the sureness of incorporating of Ni particles which was further exploited as an electrochemical sensor for H₂O₂ detection through oxidative degradation process. The simple electrochemical incorporation of Ni particles along the pores of Nafion improves the stability of the sensor significantly. The oxidative pathway of hydrogen peroxide on GCE/Nafion/Ni was probed by analyzing mass transfer dependent linear sweep voltammograms both in static and rotating modes along with chronoamperometry. An electron transfer step determines the overall reaction rate with k°= 2.72 × 10^-4 cm s^-1, which is supported by the values of transfer coefficient (β) in between (0.68-0.75). Sensing performance was evaluated by recording differential pulse voltammograms (DPVs) with the linear detection limit (LOD) of 1.8 μM and linear dynamic range (LDR) of 5-500 μM. Real samples from industrial sources were successfully quantified with excellent reproducibility mark GCE/Nafion/Ni electrode as an applicable sensor.

A nanostructured microfluidic device for plasmon-assisted electrochemical detection of hydrogen peroxide released from cancer cells

Non-invasive liquid biopsies offer hope for a rapid, risk-free, real-time glimpse into cancer diagnostics. Recently, hydrogen peroxide (H₂O₂) was identified as a cancer biomarker due to its continued release from cancer cells compared to normal cells. The precise monitoring and quantification of H₂O₂ are hindered by its low concentration and the limit of detection (LOD) in traditional sensing methods. Plasmon-assisted electrochemical sensors with their high sensitivity and low LOD make a suitable candidate for effective detection of H₂O₂, yet their electrical properties need to be improved. Here, we propose a new nanostructured microfluidic device for ultrasensitive, quantitative detection of H₂O₂ released from cancer cells in a portable fashion. The fluidic device features a series of self-organized gold nanocavities, enhanced with graphene nanosheets having optoelectrical properties, which facilitate the plasmon-assisted electrochemical detection of H₂O₂ released from human cells. Remarkably, the device can successfully measure the released H₂O₂ from breast cancer (MCF-7) and prostate cancer (PC3) cells in human plasma. Briefly, direct amperometric detection of H₂O₂ under simulated visible light illumination showed a superb LOD of 1 pM in a linear range of 1 pM-10 μM. We thoroughly studied the formation of self-organized plasmonic nanocavities on gold electrodes via surface and photo-electrochemical characterization techniques. In addition, the finite-difference time domain (FDTD) simulation of the electric field demonstrates the intensity of charge distribution at the nanocavity structure edges under visible light illumination. The superb LOD of the proposed electrode combining gold plasmonic nanocavities and graphene sheets paves the way for the development of non-invasive plasmon-assisted electrochemical sensors that can effectively detect low concentrations of H₂O₂ released from cancer cells.

Wearable and Mobile Sensors for Personalized Nutrition

While wearable and mobile chemical sensors have experienced tremendous growth over the past decade, their potential for tracking and guiding nutrition has emerged only over the past three years. Currently, guidelines from doctors and dietitians represent the most common approach for maintaining optimal nutrition status. However, such recommendations rely on population averages and do not take into account individual variability in responding to nutrients. Precision nutrition has recently emerged to address the large heterogeneity in individuals' responses to diet, by tailoring nutrition based on the specific requirements of each person. It aims at preventing and managing diseases by formulating personalized dietary interventions to individuals on the basis of their metabolic profile, background, and environmental exposure. Recent advances in digital nutrition technology, including calories-counting mobile apps and wearable motion tracking devices, lack the ability of monitoring nutrition at the molecular level. The realization of effective precision nutrition requires synergy from different sensor modalities in order to make timely reliable predictions and efficient feedback. This work reviews key opportunities and challenges toward the successful realization of effective wearable and mobile nutrition monitoring platforms. Non-invasive wearable and mobile electrochemical sensors, capable of monitoring temporal chemical variations upon the intake of food and supplements, are excellent candidates to bridge the gap between digital and biochemical analyses for a successful personalized nutrition approach. By providing timely (previously unavailable) dietary information, such wearable and mobile sensors offer the guidance necessary for supporting dietary behavior change toward a managed nutritional balance. Coupling of the rapidly emerging wearable chemical sensing devices-generating enormous dynamic analytical data-with efficient data-fusion and data-mining methods that identify patterns and make predictions is expected to revolutionize dietary decision-making toward effective precision nutrition.

Green synthesis of silver nanoparticles using pollen extract: Characterization, assessment of their electrochemical and antioxidant activities

In the present study, a simple, cheaply and environmental friendly method was evaluated for the synthesis of silver nanoparticle via Cupressus sempervirens L. (CSPE) pollen extract as reducing and stabilizing agent. Various parameters such as volume of CSPE, temperature and reaction time on AgNPs formation were investigated spectrophotometrically to optimize reaction conditions. The electrochemical behavior of the biosynthesized AgNPs were investigated by cyclic voltammetry and square wave voltammetry techniques. An electrosensor based on AgNPs modified glassy carbon electrode were constructed and tested on electro reduction of hydrogen peroxide in phosphate buffer medium. The prepared electrosensor could detect the H₂O₂ in the range of 5.0 μM - 2.5 mM with a detection limit of 0.23 μM. In addition, the antioxidant activity of biosynthesized AgNPs were evaluated against DPPH free radical. Results obtained from the antioxidant study suggested that CSPE mediated AgNPs exhibit a good antioxidant effect.

Highly dispersed silver imbedded into TiN submicrospheres for electrochemical detecting of hydrogen peroxide

We report the fabrication of silver nanoparticles evenly imbedded into TiN submicrospheres via one-pot solvothermal reaction and subsequent nitridation for electrochemical detecting of hydrogen peroxide. The precursor of TiO₂ submicrospheres and high dispersion of silver nanoparticles are regulated by the alcoholysis of tetrabutyl titanate and reducibility of enol in vitamin C. The ion nitriding promoted the conductivity and micro-nano porous structure on the surface of TiN submicrospheres, which increase the dispersity of silver nanoparticles and make contributions to avoid aggregations. More importantly, the electrochemical response of Ag-TiN submicrospheres to H₂O₂ was remarkably enhanced due to the co-effects of Ag and N-doping. It provides a superior sensing performance for electrochemical detection of hydrogen peroxide at − 0.3 V with a high sensitivity of 33.25 μA mmol L⁻¹ cm⁻², wide linear range of 0.05–2100 μM and low detection limit of 7.7 nM. The fabricated sensor also reliably applied in detection of H₂O₂ in milk samples with good reproducibility, repeatability and storage stability.

Highly branched gold-copper nanostructures for non-enzymatic specific detection of glucose and hydrogen peroxide

The development of highly sensitive and highly selective sensors for non-enzymatic glucose and hydrogen peroxide (H₂O₂) detection using gold-copper alloy nanoparticles (AuCu alloy NPs) is reported. The AuCu NPs are nanostructures with branches and can be used as an electrochemical catalyst. Series of AuCu alloy NPs with various metal ratios are synthesized through a coreduction reaction. The morphology of AuCu alloy NPs is altered from highly branched structures (nanourchin, nanobramble, nanostar, nanocrystal) to a spherical shape by increasing Au content in the synthesis reaction. Cu-rich AuCu nanobramble and Au-rich AuCu nanostar exhibit selective electrocatalysis behaviors toward electro-oxidation of glucose and electroreduction of H₂O₂, respectively. The AuCu nanobramble-based sensor holds great potential in glucose detection with a linear working range of 0.25 to 10 mM. The sensor possesses a sensitivity of 339.35 μA mM^-1 cm^-2, a limit of detection (LOD) of 16.62 μM, which is an acceptable selectivity and good stability. In addition, the AuCu nanostar-based sensor shows excellent electrochemical responses toward H₂O₂ reduction with good selectivity, reproducibility, and a short response time of about 2-3 s. The linear range for H₂O₂ determination is 0.05 to 10 mM, with LOD and sensitivity of 10.93 μM and 133.74 μA mM^-1 cm^-2, respectively. The good sensing performance is a result of the synergistic surface structure and atomic composition effects, which leads AuCu alloys to be a promising nanocatalyst for sensing both glucose and H₂O₂. Graphical abstract Schematic illustration presents the construction of gold-copper alloy nanoparticles (AuCu alloy NPs) on the surface of screen-printed carbon electrode (SPCE). The highly branched nanostructures of AuCu alloys with different surface structure and metal ratios give selective electrocatalysis behaviors. Cu-rich AuCu nanobramble-based sensor reveals prominent electrocatalytic activity for glucose detection. Au-rich AuCu nanostar-based sensor provides good electrochemical response for H₂O₂ detection.

Facile preparation of novel Pd nanowire networks on a polyaniline hydrogel for sensitive determination of glucose

In this study, novel Pd nanowire networks (PdNW) grown on three-dimensional polyaniline hydrogel (3D-PANI) were prepared via a facile one-step electrodeposition approach at a constant potential of - 0.2 V and further utilized as an electrochemical sensing material for sensitive determination of glucose in alkaline medium. Compared with the sensor based on Pd nanofilm (PdNF)/3D-PANI prepared by electrodeposition at - 0.9 V, the sensor based on PdNW/3D-PANI presented substantially enhanced electrocatalytic activity towards glucose oxidation, with an excellent sensitivity of 146.6 μA mM^-1 cm^-2, a linear range from 5.0 to 9800 μM, and a low detection limit of 0.7 μM and was, therefore, demonstrated to be available for the determination of glucose in human serum. These findings are likely attributed to the combination of advantages of both PdNW and 3D-PANI, which outperformed most other Pd-based non-enzymatic glucose sensors reported earlier. Moreover, this non-enzymatic electrochemical sensor based on PdNW/3D-PANI may serve as an alternative tool for the assay of glucose and possibly other biomolecules. Graphical abstract.

Direct chemical vapor deposition of graphene on plasma-etched quartz glass combined with Pt nanoparticles as an independent transparent electrode for non-enzymatic sensing of hydrogen peroxide

In this work, chemical vapor deposition (CVD) method-grown graphene on plasma-etched quartz glass supported platinum nanoparticles (PtNPs/eQG) was constructed as an independent transparent electrode for non-enzymatic hydrogen peroxide (H₂O₂) detection. Graphene grown on quartz glass by the CVD method can effectively reduce the wrinkles and pollution caused by traditional transfer methods. The addition of the CF₄ plasma-etched process accelerates the growth rate of graphene on quartz glass. The platinum nanoparticles (PtNPs) prepared by in situ sputtering have favorable dispersibility and maximize exposed active catalytic sites on graphene, providing performance advantages in the application of H₂O₂ detection. The resulting sensor's detection limit (3.3 nM, S/N = 3), detection linear range (10 nM to 80 μM) and response time (less than 2 s) were significantly superior to other graphene supported PtNPs materials in sensing of H₂O₂. In addition, the material preparation method was related to the non-transfer CVD method and in situ sputtering technology, allowing for the creation of independent electrodes without additional electrode modification processes. This primitive material preparation and electrode assembly process were promoted for the application and development of practical H₂O₂ sensors.

In this work, chemical vapor deposition (CVD) method-grown graphene on plasma-etched quartz glass supported platinum nanoparticles (PtNPs/eQG) was constructed as an independent transparent electrode for non-enzymatic hydrogen peroxide (H₂O₂) detection.

Enzyme-less amperometric sensor manufactured using a Nafion–LaNiO3 nanocomposite for hydrogen peroxide

In the present study, an enzyme-less amperometric sensor based on Nafion (NF) and a LaNiO₃ (LNO) nanocomposite was constructed for H₂O₂ detection. LNO from the perovskite group was mixed with NF as an effective solubilizing and stabilizing agent that was used as a novel modifier for modification of the glassy carbon electrode (GCE). The designed sensor showed a desirable electrocatalytic response toward H₂O₂ reduction. The calibration curve revealed two linear portions in the concentration ranges of 0.2–50 μM and 50–3240 μM, and the detection limit was 0.035 μM. The accuracy of the interference-free sensor was checked by recovery analysis in serum samples.

In the present study, an enzyme-less amperometric sensor based on Nafion (NF) and a LaNiO₃ (LNO) nanocomposite was constructed for H₂O₂ detection.

A Non-Enzymatic Sensor Based on Trimetallic Nanoalloy with Poly (Diallyldimethylammonium Chloride)-Capped Reduced Graphene Oxide for Dynamic Monitoring Hydrogen Peroxide Production by Cancerous Cells

Catching cancer at an early stage is necessary to make it easier to treat and to save people's lives rather than just extending them. Reactive oxygen species (ROS) have sparked a huge interest owing to their vital role in various biological processes, especially in tumorigenesis, thus leading to the potential of ROS as prognostic biomarkers for cancer. Herein, a non-enzymatic biosensor for the dynamic monitoring of intracellular hydrogen peroxide (H2O2), the most important ROS, via an effective electrode composed of poly (diallyldimethylammonium chloride) (PDDA)-capped reduced graphene oxide (RGO) nanosheets with high loading trimetallic AuPtAg nanoalloy, is proposed. The designed biosensor was able to measure H2O2 released from different cancerous cells promptly and precisely owing to the impressive conductivity of RGO and PDDA and the excellent synergistic effect of the ternary alloy in boosting the electrocatalytic activity. Built upon the peroxidase-like activity of the nanoalloy, the developed sensor exhibited distinguished electrochemical performance, resulting in a low detection limit of 1.2 nM and a wide linear range from 0.05 μM to 5.5 mM. Our approach offers a significant contribution toward the further elucidation of the role of ROS in carcinogenesis and the effective screening of cancer at an early stage.

Facile Fabrication of Hierarchical rGO/PANI@PtNi Nanocomposite via Microwave-Assisted Treatment for Non-Enzymatic Detection of Hydrogen Peroxide

A hierarchical composite based on the modified reduced graphene oxide with platinum-nickel decorated polyaniline nano-spheres (rGO/PANI@PtNi) was facilely prepared via microwave-assisted self-reduction for an application in nonenzymatic hydrogen peroxide (H₂O₂) detection. Compared to the pristine rGO, the composite exhibited a much tougher surface due to the stacking of conductive PANI nano-spheres on rGO sheets, leading to good dispersion of PtNi nanoparticles and a large active area. Furthermore, the multi-valance Ni^2+/3+ in the PtNi particles effectively promoted the catalytic property of Pt sites and facilitated a superior electrochemical performance of PtNi alloy than that of neat Pt. Owing to the synergistic effect of the improved electrical conductivity and the promoted electrocatalytical property, the modified glassy carbon electrode (GCE) with rGO/PANI@PtNi nanocomposite displayed an outstanding electrochemical sensitivity towards H₂O₂ with a fast response time (<2 s), a wide linear range (0.1–126.4 mM), a low detection limit (0.5 µM), as well as a long-life stability for one week without obvious degradation. This novel strategy opens a novel and promising approach to design high performance sensors for H₂O₂ detection.

A screen printed carbon electrode modified with a lamellar nanocomposite containing dendritic silver nanostructures, reduced graphene oxide, and β-cyclodextrin for voltammetric sensing of nitrite

A disposable sensor is described for the determination of nitrite. A screen printed carbon electrode (SPCE) was modified with a 3D lamellar nanocomposite prepared by one-step electrodeposition from dendritic silver nanostructures, reduced graphene oxide, and β-cyclodextrin. The modified SPCE exhibits high electrocatalytic activity toward nitrite oxidation, typically at a working potential at around 0.76 V (vs. Ag/AgCl). Sensitive and selective voltammetric detection of nitrite is demonstrated. The linear range extends from 1 to 2000 μM, the detection limit is 0.24 μM, and the sensitivity is 585.7 μA mM-1 cm-2. The method was applied to the determination of nitrite in (spiked) pickles. Graphical abstract Schematic presentation of fabrication of a screen printed carbon electrode modified with a lamellar nanocomposite containing dendritic silver nanostructures, reduced graphene oxide, and β-cyclodextrin. Graphical abstract contains poor quality of text inside the artwork. Please do not re-use the file that we have rejected or attempt to increase its resolution and re-save. It is originally poor, therefore, increasing the resolution will not solve the quality problem. We suggest that you provide us the original format. We prefer replacement figures containing vector/editable objects rather than embedded images. Preferred file formats are eps, ai, tiff and pdf.We have provided the original format of graphical abstract in the attachment.

Titanium dioxide nanoparticles-based colorimetric sensors for determination of hydrogen peroxide and triacetone triperoxide (TATP)

Due to its relatively simple preparation and readily available precursors, determination of triacetone triperoxide (TATP) by portable devices has become important. In this work, two different titanium dioxide nanoparticles (TiO₂NPs)-based colorimetric sensors based on complex formation on the solid surface were developed for determination of H₂O₂ and TATP. The first sensor, (3-aminopropyl)triethoxysilane (APTES) modified-TiO₂NPs-based paper sensor (APTES@TiO₂NPs), exploits peroxo-titanate binary complex formation between APTES@TiO₂NPs and H₂O₂ on chromatographic paper. The second sensor, 4-(2-pyridylazo)-resorcinol-modified-TiO₂NPs-based solid sensor (PAR@TiO₂NPs), relies on the formation of a ternary complex between Ti(IV), PAR and H₂O₂. The developed sensors were also applied to TATP determination after acidic hydrolysis of samples to H₂O₂. The limits of detection (LODs) of APTES@TiO₂NPs-based paper sensor were 3.14 × 10^-4 and 5.13 × 10^-4 mol L^-1 for H₂O₂ and TATP, respectively, whereas the LODs of PAR@TiO₂NPs solid sensor were 6.06 × 10^-7 and 3.54 × 10^-7 mol L^-1 for H₂O₂ and TATP, respectively. Possible interferences of common soil ions, passenger belongings used as camouflage materials during public transport (e.g., detergent, sweetener, acetylsalicylic acid and paracetamol-caffeine based analgesic drugs) and of other explosives were examined. The developed methods were statistically validated using t- and F- tests against the titanyl sulfate (TiOSO₄) colorimetric literature method.

Synthesis, Characterization, and Biomedical Applications of an Alkylated Quercetin-Gadolinium Complex

Flavonoids and their derivatives have been extensively studied for their pharmaceutical applications due to their antioxidant and anti-inflammatory properties. The coordination complexes of several flavonoids have demonstrated DNA binding ability that can confer anticancer properties. The structure of the flavonoid has a pronounced influence on its pharmacological properties. Herein we report the synthesis and characterization of alkylated quercetin and its complex with gadolinium. The structure of the complex was confirmed using spectroscopic techniques. The ability of the gadolinium-alkylated quercetin complex to serve as a magnetic contrast agent was compared with gadolinium-quercetin complex. The quercetin-gadolinium complex was found to exhibit better contrast property with a relaxivity of 0.2952 μg mL^-1 s^-1 when compared to the gadolinium complex of alkylated quercetin. This difference primarily arises due to the greater hydrophobicity of the alkylated quercetin complex that restricts access of water. However, the alkylated quercetin was found to exhibit better enzyme mimic activity as the metal ion served as a redox center that enabled quantification of hydrogen peroxide in the concentration range 50-450 μM within 5 s with a sensitivity of 64 nA/μM and limit of detection of 7.3 μM. The better sensing performance of the alkylated quercetin-gadolinium complex, reported here for the first time, when compared to quercetin-gadolinium complex can be attributed to the enhanced electroactive area on the working electrode.

Enzymeless electrochemical determination of hydrogen peroxide at a heteropolyanion-based composite film electrode

For the first time, a sensitive and efficient composite film of [PB/WV–Pt@Pd]₆was constructed for H₂O₂detection.

A functional FePt@MOFs (MIL-101(Fe)) nano-platform for high efficient colorimetric determination of H2O2

Surface-modified FePt nanoparticles were loaded into metal–organic frameworks in a facile in situ way and the resulting material (FePt@MOFs NCs) acted as a high efficient colorimetric detection agent for H₂O₂.

Palladium nanoparticles decorated SnO2 wrapped MWCNT nanocomposites as a highly efficient H2O2 electrocatalyst

A nanocomposite of Pd–SnO₂@MWCNTs was successfully achieved using a hydrothermal method and its excellent electrocatalytic activity towards hydrogen peroxide was investigated.

Green Preparation of Ag-Au Bimetallic Nanoparticles Supported on Graphene with Alginate for Non-Enzymatic Hydrogen Peroxide Detection

In this work, a facile, environmentally friendly method was demonstrated for the synthesis of Ag-Au bimetallic nanoparticles (Ag-AuNPs) supported on reduced graphene oxide (RGO) with alginate as reductant and stabilizer. The prepared Ag-AuNPs/RGO was characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The results indicated that uniform, spherical Ag-AuNPs was evenly dispersed on graphene surface and the average particle size is about 15 nm. Further, a non-enzymatic sensor was subsequently constructed through the modified electrode with the synthesized Ag-AuNPs/RGO. The sensor showed excellent performance toward H₂O₂ with a sensitivity of 112.05 μA·cm⁻²·mM⁻¹, a linear range of 0.1–10 mM, and a low detection limit of 0.57 μM (S/N = 3). Additionally, the sensor displayed high sensitivity, selectivity, and stability for the detection of H₂O₂. The results demonstrated that Ag-AuNPs/RGO has potential applications as sensing material for quantitative determination of H₂O₂.

A novel nonenzymatic hydrogen peroxide amperometric sensor based on Pd@CeO2-NH2 nanocomposites modified glassy carbon electrode

Herein, (3-aminopropyl)triethoxysilane functionalized cerium (IV) oxide (CeO₂-NH₂) supported Pd nanoparticles were synthesized. The nanocomposites were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and High-resolution transmission electron microscopy (HRTEM). The Pd@CeO₂-NH₂ showed better electrocatalytic response to the reduction of H₂O₂ than CeO₂-NH₂. The fabricated sensor exhibited two linear responses to the reduction of H₂O₂. The first one was from 0.001 to 3.276 mM with 0.47 μM of a limit of detection (LOD) (S/N = 3) and excellent sensitivity of 440.72 μA mM^-1 cm^-2 and the second one was from 3.276 to 17.500 mM with the sensitivity of 852.65 μA mM^-1 cm^-2 in the optimum conductions. Also, the sensor exhibited 91% of electrocatalytic activity toward H₂O₂ after having been used for 30 days and the reproducibility was also satisfactory. The sensor response to H₂O₂ was not affected by ascorbic acid, fructose, glycine, dopamine, arginine, mannose, glucose, uric acid, Mg⁺², Ca⁺², and phenylalanine at the studied potential. Also, the fabricated sensor was used to determine H₂O₂ in milk samples. The results show that the constructed sensor can be a promising devise for the determination of H₂O₂ in real samples.