Selective electrochemical sensor based on the electropolymerized p-coumaric acid for the direct determination of l-cysteine

Sensitive SERS assay for L-cysteine based on functionalized silver nanoparticles

L-cysteine, an indispensable amino acid present in natural proteins, plays pivotal roles in various biological processes. Consequently, precise and selective monitoring of its concentrations is imperative. Herein, we propose a Surface-enhanced Raman Scattering (SERS) sensor for detecting L-cysteine based on the anti-aggregation of 4-mercaptobenzoic acid (4-MBA) and histidine (His) functionalized silver nanoparticles (Ag NPs). The presence of Hg2+ ions can induce the aggregation of Ag NPs@His@4-MBA due to the unique nanostructures of Ag NPs@His@4-MBA, resulting in a robust SERS intensity of 4-MBA. However, in the presence of L-cysteine, the stronger affinity between L-cysteine and Hg2+ reduces the concentration of free Hg2+, causing the dispersion of the aggregated functionalized Ag NPs and the reduction of the SERS signal intensity of 4-MBA. The developed SERS platform demonstrates excellent performance with a low detection limit of 5 nM (S/N = 3) and linear detection capabilities within the range of 0.01-100 μM for L-cysteine. Additionally, the method was successfully employed for the determination of L-cysteine in spiked serum samples, yielding recoveries ranging from 95.0 % to 108.1 % with relative standard deviations of less than 3.3 %. This study not only presents a novel approach for fabricating highly sensitive and specific SERS biosensors for biomolecule detection but also offers a significant strategy for the development and construction of SERS substrates using anti-aggregation design.

A dense SERS substrate of the AgNPs@GO compound film for detecting homocysteine molecules

This study focuses on the development of a highly sensitive surface-enhanced Raman scattering (SERS) sensor for detecting homocysteine (Hcy) molecules. The Hcy sensor was created by depositing silver nanoparticles (AgNPs) onto the surface of graphene oxide (GO) film to form a dense AgNPs@GO composite film. The AgNPs on the composite film interacted with sulfur atoms (S) of Hcy molecules to form Ag-S bonds, which boosted the chemisorption of Hcy molecules and enabled them to be specifically recognized. The SERS sensor exhibited a maximum enhancement factor of up to 1.1 × 104, with a reliable linear response range from 1 to 60 ng mL-1. The limit of detection (LOD) for Hcy molecules was as low as 1.1 × 10-9 M. Moreover, Hcy molecules were successfully distinguished in a mixed solution of γ-aminobutyric acid and Hcy molecules. In this study, a simple preparation process of SERS substrate and a novel detection method for Hcy molecules provided a new pathway for the rapid and effective detection of Hcy molecules in the food and biomedicine fields.

Recent Advances in Electrochemical Sensors for Sulfur-Containing Antioxidants

Sulfur-containing antioxidants are an important part of the antioxidant defense systems in living organisms under the frame of a thiol-disulfide equilibrium. Among them, l-cysteine, l-homocysteine, l-methionine, glutathione, and α-lipoic acid are the most typical representatives. Their actions in living systems are briefly discussed. Being electroactive, sulfur-containing antioxidants are interesting analytes to be determined using various types of electrochemical sensors. Attention is paid to the chemically modified electrodes with various nanostructured coverages. The analytical capabilities of electrochemical sensors for sulfur-containing antioxidant quantification are summarized and discussed. The data are summarized and presented on the basis of the electrode surface modifier applied, i.e., carbon nanomaterials, metal and metal oxide nanoparticles (NPs) and nanostructures, organic mediators, polymeric coverage, and mixed modifiers. The combination of various types of nanomaterials provides a wider linear dynamic range, lower limits of detection, and higher selectivity in comparison to bare electrodes and sensors based on the one type of surface modifier. The perspective of the combination of chromatography with electrochemical detection providing the possibility for simultaneous determination of sulfur-containing antioxidants in a complex matrix has also been discussed.

Facile fabrication of laser induced versatile graphene-metal nanoparticles electrodes for the detection of hazardous molecules

In this work, we developed a facile method to fabricate laser induced versatile graphene-metal nanoparticles (LIG-MNPs) electrodes with redox molecules sensing capabilities. Unlike conventional post-electrodes deposition, versatile graphene-based composites were engraved by a facile synthesis process. As a general protocol, we successfully prepared modular electrodes including LIG-PtNPs and LIG-AuNPs and applied them to electrochemical sensing. This facile laser engraving process enables rapid preparation and modification of electrodes, as well as simple replacement of metal particles modification towards varied sensing targets. The LIG-MNPs showed high sensitivity towards H₂O₂ and H₂S due to their excellent electron transmission efficiency and electrocatalytic activity. By simply changing the types of coated precursors, the LIG-MNPs electrodes have successfully achieved real-time monitoring of H₂O₂ released from tumor cells and H₂S contained in wastewater. This work contributed a universal and versatile protocol for quantitatively detecting a wide range of hazardous redox molecules.

Layer-by-Layer Combination of MWCNTs and Poly(ferulic acid) as Electrochemical Platform for Hesperidin Quantification

The electrochemical polymerization of suitable monomers is a powerful way to create voltammetric sensors with improved responses to a target analyte. Nonconductive polymers based on phenolic acids were successfully combined with carbon nanomaterials to obtain sufficient conductivity and high surface area of the electrode. Glassy carbon electrodes (GCE) modified with multi-walled carbon nanotubes (MWCNTs) and electropolymerized ferulic acid (FA) were developed for the sensitive quantification of hesperidin. The optimized conditions of FA electropolymerization in basic medium (15 cycles from -0.2 to 1.0 V at 100 mV s^-1 in 250 µmol L^-1 monomer solution in 0.1 mol L^-1 NaOH) were found using the voltammetric response of hesperidin. The polymer-modified electrode exhibited a high electroactive surface area (1.14 ± 0.05 cm² vs. 0.75 ± 0.03 and 0.089 ± 0.003 cm² for MWCNTs/GCE and bare GCE, respectively) and decreased in the charge transfer resistance (21.4 ± 0.9 kΩ vs. 72 ± 3 kΩ for bare GCE). Under optimized conditions, hesperidin linear dynamic ranges of 0.025-1.0 and 1.0-10 µmol L^-1 with a detection limit of 7.0 nmol L^-1 were achieved, which were the best ones among those reported to date. The developed electrode was tested on orange juice and compared with chromatography.

Flexible Label-Free Platinum and Bio-PET-Based Immunosensor for the Detection of SARS-CoV-2

The demand for new devices that enable the detection of severe acute respiratory syndrome-coronavirus-2 (SARS-CoV-2) at a relatively low cost and that are fast and feasible to be used as point-of-care is required overtime on a large scale. In this sense, the use of sustainable materials, for example, the bio-based poly (ethylene terephthalate) (Bio-PET) can be an alternative to current standard diagnostics. In this work, we present a flexible disposable printed electrode based on a platinum thin film on Bio-PET as a substrate for the development of a sensor and immunosensor for the monitoring of COVID-19 biomarkers, by the detection of L-cysteine and the SARS-CoV-2 spike protein, respectively. The electrode was applied in conjunction with 3D printing technology to generate a portable and easy-to-analyze device with a low sample volume. For the L-cysteine determination, chronoamperometry was used, which achieved two linear dynamic ranges (LDR) of 3.98-39.0 μmol L^-1 and 39.0-145 μmol L^-1, and a limit of detection (LOD) of 0.70 μmol L^-1. The detection of the SARS-CoV-2 spike protein was achieved by both square wave voltammetry (SWV) and electrochemical impedance spectroscopy (EIS) by a label-free immunosensor, using potassium ferro-ferricyanide solution as the electrochemical probe. An LDR of 0.70-7.0 and 1.0-30 pmol L^-1, with an LOD of 0.70 and 1.0 pmol L^-1 were obtained by SWV and EIS, respectively. As a proof of concept, the immunosensor was successfully applied for the detection of the SARS-CoV-2 spike protein in enriched synthetic saliva samples, which demonstrates the potential of using the proposed sensor as an alternative platform for the diagnosis of COVID-19 in the future.

The synthesis of Pt doped WO3 nanosheets and application on colorimetric detection of cysteine by naked eye using response surface methodology for optimization

We present a simple, sensitive, and specific colorimetric using the peroxidase properties method based on Pt doped WO₃ nanosheets to detect the cysteine. Pt@WO₃NSs were synthesized by hydrothermal method and characterized by Fourier transform infrared (FTIR), Transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction patterns (XRD) methods. The response surface methodology (RSM) method based on the central composite design (CCD) was used to optimize test parameters such as pH, nanosheet concentration, and temperature. When cysteine is present in the environment due to its competition with 3,3', 5,5'-Tetramethylbenzidine (TMB) in the use of hydrogen peroxide, the blue discoloration is reduced compared to the absence of cysteine and leads to its detection. We have favorably created a peculiar approach for sensing cysteine based on the colorimetric method in solution and paper with linear range 0.01-15 μM, 0.005-14 μM and R² = 0.9887 and R² = 0.9871 respectively. The detection limit for solution-based is 1.2 nM and for paper-based is 1 nM.

Enzyme-immobilized metal-organic frameworks: From preparation to application

As a class of widely used biocatalysts, enzymes possess advantages including high catalytic efficiency, strong specificity and mild reaction condition. However, most free enzymes have high requirements on the reaction environment and are easy to deactivate. Immobilization of enzymes on nanomaterial-based substrates is a good way to solve this problem. Metal-organic framework (MOFs), with ultra-high specific surface area and adjustable porosity, can provide a large space to carry enzymes. And the tightly surrounded protective layer of MOFs can stabilize the enzyme structure to a great extent. In addition, the unique porous network structure enables selective mass transfer of substrates and facilitates catalytic processes. Therefore, these enzyme-immobilized MOFs have been widely used in various research fields, such as molecule/biomolecule sensing and imaging, disease treatment, energy and environment protection. In this review, the preparation strategies and applications of enzymes-immobilized MOFs are illustrated and the prospects and current challenges are discussed.

Controllable synthesis of BiPr composite oxide nanowires electrocatalyst for sensitive L-cysteine sensing properties

BiPr composite oxide nanowires with rhombodedral Bi_1.35Pr_0.65O₃, monoclinic Bi₂O₃and monoclinic Pr₅O₉phases were synthesized via a facile sodium dodecyl sulfate (SDS) assisted hydrothermal route. The obtained nanowires were characterized by x-ray diffraction, electron microscopy, x-ray photoelectron spectroscopy and electrochemical measurements. The BiPr composite oxide nanowires possess poly-crystalline structure, semi-circular tips, diameter and length of 20-100 nm and several micrometers, respectively. SDS is essential for the formation of the BiPr composite oxide nanowires which can be explained by a SDS assisted hydrothermal growth process. Electrochemical impedance spectroscopy shows that the electrons are easier to transfer by the surface of the BiPr composite oxide nanowires modified glassy carbon electrode (GCE) than bare GCE. The BiPr composite oxide nanowires modified GCE possesses good electro-catalytic activity for L-cysteine detection with a pair of quasi-reversible cyclic voltammetry peaks at +0.04 V and -0.72 V for the oxidation and reduction of L-cysteine, respectively. The roles of the scan rate, electrolyte species and L-cysteine concentration on the electrochemical responses of L-cysteine at the nanowires modified GCE were systematically analyzed. The BiPr composite oxide nanowires modified GCE presents a linear response range from 0.001 to 2 mM and detection limit of 0.27μM, good reproducibility and stability.

Distinct roles of pH and organic ligands in the dissolution of goethite by cysteine

Electron shuttles such cysteine play an important role in Fe cycle and its availability in soils, while the roles of pH and organic ligands in this process are poorly understood. Herein, the reductive dissolution process of goethite by cysteine were explored in the presence of organic ligands. Our results showed that cysteine exhibited a strong reactivity towards goethite - a typical iron minerals in paddy soils with a rate constant ranging from 0.01 to 0.1 hr^-1. However, a large portion of Fe(II) appeared to be "structural species" retained on the surface. The decline of pH was favorable to generate more Fe(II) ions and enhancing tendency of Fe(II) release to solution. The decline of generation of Fe(II) by increasing pH was likely to be caused by a lower redox potential and the nature of cysteine pH-dependent adsorption towards goethite. Interestingly, the co-existence of oxalate and citrate ligands also enhanced the rate constant of Fe(II) release from 0.09 to 0.15 hr^-1; nevertheless, they negligibly affected the overall generation of Fe(II) in opposition to the pH effect. Further spectroscopic evidence demonstrated that two molecules of cysteine could form disulfide bonds (S-S) to generate cystine through oxidative dehydration, and subsequently, inducing electron transfer from cysteine to the structural Fe(III) on goethite; meanwhile, those organic ligands act as Fe(II) "strippers". The findings of this work provide new insights into the understanding of the different roles of pH and organic ligands on the generation and release of Fe induced by electron shuttles in soils.

Simultaneous Determination of Ferulic Acid and Vanillin in Vanilla Extracts Using Voltammetric Sensor Based on Electropolymerized Bromocresol Purple

Natural phenolic antioxidants are one of the widely studied compounds in life sciences due to their important role in oxidative stress prevention and repair. The structural similarity of these antioxidants and their simultaneous presence in the plant samples stipulate the development of methods for their quantification. The current work deals with the simultaneous determination of vanillin and its bioprecursor ferulic acid using a voltammetric sensor for the first time. A sensor based on the layer-by-layer deposition of the polyaminobenzene sulfonic acid functionalized single-walled carbon nanotubes (f-SWCNTs) and electropolymerized bromocresol purple has been developed for this purpose. The best response of co-existing target analytes was registered for the polymer obtained from the 25 µM dye by 10-fold potential cycling from 0.0 to 1.2 V with the scan rate of 100 mV s⁻¹ in 0.1 M phosphate buffer (PB), pH 7.0. Scanning electron microscopy (SEM), cyclic voltammetry and electrochemical impedance spectroscopy (EIS) confirmed the effectivity of the sensor developed. The linear dynamic ranges of 0.10–5.0 µM and 5.0–25 µM for both analytes with the detection limits of 72 nM and 64 nM for ferulic acid and vanillin, respectively, were achieved in differential pulse mode. The sensor was applied for the analysis of vanilla extracts.

Electrochemical Sensors Based on the Electropolymerized Natural Phenolic Antioxidants and Their Analytical Application

The design and fabrication of novel electrochemical sensors with high analytical and operational characteristics are one of the sustainable trends in modern analytical chemistry. Polymeric film formation by the electropolymerization of suitable monomers is one of the methods of sensors fabrication. Among a wide range of the substances able to polymerize, the phenolic ones are of theoretical and practical interest. The attention is focused on the sensors based on the electropolymerized natural phenolic antioxidants and their analytical application. The typical electropolymerization reaction schemes are discussed. Phenol electropolymerization leads to insulating coverage formation. Therefore, a combination of electropolymerized natural phenolic antioxidants and carbon nanomaterials as modifiers is of special interest. Carbon nanomaterials provide conductivity and a high working surface area of the electrode, while the polymeric film properties affect the selectivity and sensitivity of the sensor response for the target analyte or the group of structurally related compounds. The possibility of guided changes in the electrochemical response for the improvement of target compounds' analytical characteristics has appeared. The analytical capabilities of sensors based on electropolymerized natural phenolic antioxidants and their future development in this field are discussed.

Electrochemical Amino Acid Sensing: A Review on Challenges and Achievements

The rapid growth of research in electrochemistry in the last decade has resulted in a significant advancement in exploiting electrochemical strategies for assessing biological substances. Among these, amino acids are of utmost interest due to their key role in human health. Indeed, an unbalanced amino acid level is the origin of several metabolic and genetic diseases, which has led to a great need for effective and reliable evaluation methods. This review is an effort to summarize and present both challenges and achievements in electrochemical amino acid sensing from the last decade (from 2010 onwards) to show where limitations and advantages stem from. In this review, we place special emphasis on five well-known electroactive amino acids, namely cysteine, tyrosine, tryptophan, methionine and histidine. The recent research and achievements in this area and significant performance metrics of the proposed electrochemical sensors, including the limit of detection, sensitivity, stability, linear dynamic range(s) and applicability in real sample analysis, are summarized and presented in separate sections. More than 400 recent scientific studies were included in this review to portray a rich set of ideas and exemplify the capabilities of the electrochemical strategies to detect these essential biomolecules at trace and even ultra-trace levels. Finally, we discuss, in the last section, the remaining issues and the opportunities to push the boundaries of our knowledge in amino acid electrochemistry even further.

Hydroxycinnamic Acids and Derivatives Formulations for Skin Damages and Disorders: A Review

Alterations of skin homeostasis are widely diffused in our everyday life both due to accidental injuries, such as wounds and burns, and physiological conditions, such as late-stage diabetes, dermatitis, or psoriasis. These events are locally characterized by an intense inflammatory response, a high generation of harmful free radicals, or an impairment in the immune response regulation, which can profoundly change the skin tissue' repair process, vulnerability, and functionality. Moreover, diabetes diffusion, antibiotic resistance, and abuse of aggressive soaps and disinfectants following the COVID-19 emergency could be causes for the future spreading of skin disorders. In the last years, hydroxycinnamic acids and derivatives have been investigated and applied in several research fields for their anti-oxidant, anti-inflammatory, and anti-bacterial activities. First, in this study, we give an overview of these natural molecules' current source and applications. Afterwards, we review their potential role as valid alternatives to the current therapies, supporting the management and rebalancing of skin disorders and diseases at different levels. Also, we will introduce the recent advances in the design of biomaterials loaded with these phenolic compounds, specifically suitable for skin disorders treatments. Lastly, we will suggest future perspectives for introducing hydroxycinnamic acids and derivatives in treating skin disorders.

Recent developments in voltammetric and amperometric sensors for cysteine detection

This review article aims to provide an overview of the recent advances in the voltammetric and amperometric sensing of cysteine (Cys). The introduction summarizes the important role of Cys as an essential amino acid, techniques for its sensing, and the utilization of electrochemical methods and chemically modified electrodes for its determination. The main section covers voltammetric and amperometric sensing of Cys based on glassy carbon electrodes, screen printed electrodes, and carbon paste electrodes, modified with various electrocatalytic materials. The conclusion section discusses the current challenges of Cys determination and the future perspectives.

Emerging strategies for the activity assay and inhibitor screening of alpha-glucosidase

The high incidence of diabetes mellitus has caused widespread concern around the world, and has quickly become one of the most prevalent and costly chronic diseases.

Design of a Zn-MOF biosensor via a ligand “lock” for the recognition and distinction of S-containing amino acids

A new method of introducing a ‘lock’ ligand into the frame of MOFs is described to achieve the first example of a MOF-based biosensor for the recognition and distinction of S-containing amino acids.