Lipase@ZIF-8 nanoparticles-based biosensor for direct and sensitive detection of methyl parathion

A disposable and sensitive sensor based on a ZIF-8@graphene modified carbon paper electrode for the quantitative determination of luteolin

Rapid and accurate determination of luteolin is of great significance for pharmaceutical quality control. Herein, a disposable and sensitive luteolin sensor was fabricated by a hydrothermal method with carbon paper as substrate where ZIF-8 grew on GR in situ. Notably, the large specific surface area of ZIF-8 provided active sites on the electrode surface and the ability of GR to promote electron transfer greatly improved the sensitivity towards the oxidation of luteolin. Under the optimum conditions, the ZIF-8@GR/CP showed excellent detection performance for luteolin with a linear detection range of 0.04-3.2 μM and 3.2-120 μM, with LOD of 12 nM (S/N = 3). Furthermore, this disposable and sensitive sensor was successfully applied for the quantitative detection of luteolin in a capsule of Lamiophlomis rotata.

Design and characterization of a biosensor with lipase immobilized nanoparticles in polymer film for the detection of triglycerides

High levels of triglycerides in blood can harden and block the arteries increasing the risk of heart disease and strokes. Triglycerides are important constituents of oils and fats used in various foods. The triglyceride content in commercial preparations of oils is estimated using conventional methods. In the present study, an electrochemical biosensor with lipase immobilized novel conductive polymer film has been developed for estimating triglyceride content in a variety of products. The portable biosensor can bring down the detection costs dramatically and can be used for varied purposes. It is based on cyclic voltammetry and has a three-electrode configuration system. Glassy carbon electrode is functionalized with nanoparticles embedded in polyethyleneimine and lipase is immobilized using glutaraldehyde. The strategy increases the electrochemical conductance manifold and overcomes the hindrance to lipase posed by membranes as it is oriented on the outside of the membrane. Thus, it increases the sensitivity and selectivity of detection. Results of scanning electron microscopy and FT-IR spectroscopy were used for characterizing the electrode surface. Linear range of the electrode for triglycerides is 100-500 mg/dL. The sensor was used successfully to determine triglyceride content in several real samples and the average recovery values lie from 95.47 % to 101.05 %.

Advances in Metal-Organic Framework (MOFs) based biosensors for diagnosis: An update

Metal-organic frameworks (MOFs) have significant advantages over other candidate classes of chemo-sensory materials owing to their extraordinary structural tunability and characteristics. MOF-based biosensing is a simple, and convenient method for identifying various species. Biomarkers are molecular or cellular processes that link environmental exposure to a health outcome. Biomarkers are important in understanding the links between environmental chemical exposure and the development of chronic diseases, as well as in identifying disease-prone subgroups. Until now, several species, including nanoparticles (NPs) and their nanocomposites, small molecules, and unique complex systems, have been used for the chemical sensing of biomarkers. Following the overview of the field, we discussed the various fabrication methods for MOFs development in this review. We provide a thorough overview of the previous five years of progress to broaden the scope of analytes for future research. Several enzymatic and non-enzymatic sensors are offered, together with a mandatory measuring method that includes detection range and dynamic range. In addition, we reviewed the comparison of enzymatic and non-enzymatic biosensors, inventive edges, and the difficulties that need to be solved. This work might open up new possibilities for material production, sensor development, medical diagnostics, and other sensing fields.

Rapid Screening of Lipase Inhibitors in Scutellaria baicalensis by Using Porcine Pancreatic Lipase Immobilized on Magnetic Core–Shell Metal–Organic Frameworks

As for ligand fishing, the current immobilization approaches have some potential drawbacks such as the small protein loading capacity and difficult recycle process. The core–shell metal–organic frameworks composite (Fe3O4-COOH@UiO-66-NH2), which exhibited both magnetic characteristics and large specific surface area, was herein fabricated and used as magnetic support for the covalent immobilization of porcine pancreatic lipase (PPL). The resultant composite Fe3O4-COOH@UiO-66-NH2@PPL manifested a high loading capacity (247.8 mg/g) and relative activity recovery (101.5%). In addition, PPL exhibited enhanced tolerance to temperature and pH after immobilization. Then, the composite Fe3O4-COOH@UiO-66-NH2@PPL was incubated with the extract of Scutellaria baicalensis to fish out the ligands. Eight lipase inhibitors were obtained and identified by UPLC-Q-TOF-MS/MS. The feasibility of the method was further confirmed through an in vitro inhibitory assay and molecular docking. The proposed ligand fishing technique based on Fe3O4-COOH@UiO-66-NH2@PPL provided a feasible, selective, and effective platform for discovering enzyme inhibitors from natural products.

Dual-Mode Immunosensor for Electrochemiluminescence Resonance Energy Transfer and Electrochemical Detection of Rabies Virus Glycoprotein Based on Ru(bpy)32+-Loaded Dendritic Mesoporous Silica Nanoparticles

Rabies is a serious zoonotic disease in almost all warm-blooded animals and causes fatal encephalitis. The detection of rabies virus (RABV) is critical and remains a significant challenge. Herein, an electrochemiluminescence resonance energy transfer (ECL-RET) and electrochemical (EC) dual-mode immunosensor was developed for highly sensitive detection of RABV glycoprotein. Dendritic mesoporous silica nanoparticles (DMSNs) were employed to load Ru(bpy)₃²⁺ and to obtain ECL probes (Ru@DMSNs). Ru@DMSNs were decorated on the electrode surface, followed by the modification of the RABV antibody (Ab₁). RABV was specifically recognized and captured by Ab₁, causing the decline of the ECL signal due to the obstruction of electron transfer. Additionally, manganese oxide nanoparticles (MnO_x) modified with Ab₂ can further quench the ECL signal of Ru@DMSNs via the RET between Ru@DMSNs and MnO_x. Meanwhile, MnO_x can catalyze the oxidation of o-phenylenediamine (o-PD), generating a significant differential pulse voltammetry (DPV) signal as a second signal to monitor RABV glycoprotein concentration. Consequently, an immunosensor was developed to achieve dual-signal detection of RABV and improve reliability. Under the optimal conditions, detection ranges of 0.10 pg·mL^-1 to 10 ng·mL^-1 for ECL (with an 88 fg·mL^-1 detection limit) and 1 pg·mL^-1 to 2 ng·mL^-1 for EC (with a 0.1 pg·mL^-1 detection limit) were obtained for RABV detection. The reliability of this immunoassay was validated by eight brain tissue samples. The results were found to be compatible with the results of the real-time reverse transcription-polymerase chain reaction (RT-PCR) assay, indicating the potential applicability of this method for RABV diagnosis.

Recent advancements in metal-organic frameworks composites based electrochemical (bio)sensors

Metal-organic frameworks (MOFs) are a novel class of crystalline materials which find widespread applications in the field of microporous conductors, catalysis, separation, biomedical engineering, and electrochemical sensing. With a specific emphasis on the MOF composites for electrochemical sensor applications, this review summarizes the recent construction strategies on the development of conductive MOF composites (post-synthetic modification of MOFs, in situ synthesis of functional materials@MOFs composites, and incorporating electroactive ligands). The developed composites are revealed to have excellent electrochemical sensing activity better than their pristine forms. Notably, the applicable functionalized MOFs to electrochemical sensing/biosensing of various target species are discussed. Finally, we highlight the perspectives and challenges in the field of electrochemical sensors and biosensors for potential directions of future development.

Challenges and opportunities of using immobilized lipase as biosensor

Over the years, the science of biosensors has evolved significantly. The first or earliest generation of biosensors only detected either the decrease or increase of product or reactant-based natural mediators as the pathway for electron transfer. The subsequent second-generation biosensors were biomolecule based and used artificial redox mediators, such as organic dyes to detect and to increase the reproducibility and sensitivity of the result. However, the recent generation of biosensors work mostly on the principle of electron mobility, with different criteria, such as selectivity, precision, sensitivity, etc., can be used to quantify, efficiently. This review deals with exploring the scope and applications of Immobilized lipase biosensors. Generally, Triglycerides or TG molecules are either detected using Gas Chromatography or, using a chemical or an enzymatic assay. Immobilization of lipase on solid supports has led to increased stability and reusability of the enzyme in non-aqueous solvents. With better enzyme performance, efficient product recovery, and separation from the reaction, immobilized lipase biosensors are garnering increasing interest worldwide. Along with so many advantages including but not limiting to ones mentioned earlier, immobilized lipase-based biosensors come with their own set of challenges, such as the partitioning of the analyte with aqueous medium, slower reaction rate, etc., they have been discussed in the following review. Alongside, we also review the development of a new generation of biosensors and bioelectronic devices based on nanotechnology.

Emerging vistas on pesticides detection based on electrochemical biosensors - An update

Organophosphates and carbamates pesticides are widely used to increase crop production globally causing a threat to human health and the environment. A variety of pesticides are applied during different stages of vegetable production. Therefore, monitoring the presence of pesticide residues in food and soil has great relevance to sensitive pesticide detection through distinct determination methods that are urgently required. Conventional techniques for the detection of pesticides have several limitations that can be overcome by the development of highly sensitive, fast, reliable and easy-to-use electrochemical biosensors. Herein, we describe the types of biosensors with the main focus on electrochemical biosensors fabricated for the detection of OPPs and carbamates pesticides. An overview of conventional techniques employed for pesticide detection is also discussed. This review aims to provide a glance of recently developed biosensors for some common pesticides like chlorpyrifos, malathion, parathion, paraoxon, and carbaryl which are present in food and environment samples.

Sources, purification, immobilization and industrial applications of microbial lipases: An overview

Microbial lipase is looking for better attention with the fast growth of enzyme proficiency and other benefits like easy, cost-effective, and reliable manufacturing. Immobilized enzymes can be used repetitively and are incapable to catalyze the reactions in the system continuously. Hydrophobic supports are utilized to immobilize enzymes when the ionic strength is low. This approach allows for the immobilization, purification, stability, and hyperactivation of lipases in a single step. The diffusion of the substrate is more advantageous on hydrophobic supports than on hydrophilic supports in the carrier. These approaches are critical to the immobilization performance of the enzyme. For enzyme immobilization, synthesis provides a higher pH value as well as greater heat stability. Using a mixture of immobilization methods, the binding force between enzymes and the support rises, reducing enzyme leakage. Lipase adsorption produces interfacial activation when it is immobilized on hydrophobic support. As a result, in the immobilization process, this procedure is primarily used for a variety of industrial applications. Microbial sources, immobilization techniques, and industrial applications in the fields of food, flavor, detergent, paper and pulp, pharmaceuticals, biodiesel, derivatives of esters and amino groups, agrochemicals, biosensor applications, cosmetics, perfumery, and bioremediation are all discussed in this review.

Biomimetic self-assembly of lipase-zeolitic imidazolate frameworks with enhanced biosensing of protox inhibiting herbicides

Protox inhibiting herbicides such as nitrofen have detrimental effects on the environment and human health. The current work aims to fabricate a Candida rugosa lipase (CRL)-based electrochemical sensor for rapid and sensitive detection of protox inhibiting herbicides (nitrofen). We proposed the use of poly(vinylpyrrolidone) (PVP) and amino-acids to promote accumulation of Zn²⁺ ions at the surfaces of Candida rugosa lipase (CRL) and subsequently induce self-assembly of a CRL-zeolitic imidazolate framework (ZIF) structure. This process can be easily and rapidly achieved via a one-pot facile self-assembly method. Steady-state fluorescence spectroscopy indicated that CRL has undergone a conformational change following encapsulation within the ZIF structure. This conformational change is beneficial as the prepared PVP/Glu/CRL@ZIF-8 exhibited enhanced catalytic activity (207% of native CRL), and higher substrate affinity (lower K_m than native CRL) and showed high stability under harsh denaturing conditions. PVP/Glu/CRL@ZIF-8 was finally used for electrochemical biosensing of nitrofen. The fabricated biosensor has a wide linear detection range (0-100 μM), a lower limit of detection and a good recovery rate.

The enhanced photoelectrochemical platform constructed by N-doped ZnO nanopolyhedrons and porphyrin for ultrasensitive detection of brain natriuretic peptide

Nowadays, brain natriuretic peptide (BNP-32) is fundamental to early cardiovascular clinical diagnosis, whose accurate assay is of significance by photoelectrochemistry (PEC) for the low background and high precision. Herein, a novel enhanced PEC platform was built by successive deposition of N-doped ZnO nanopolyhedra (N-ZnO NP) and protoporphyrin IX (PPIX). Specifically, the N-ZnO NP with a narrow bandgap of 2.60 eV was synthesized by direct calcination of zeolitic imidazole framework-8 (ZIF-8), and performed as the substrate to enhance the photocurrents of PPIX (as photosensitizer) whose photoelectron transfer pathway and enhanced PEC mechanism were studied in detail. Under such foundation, a label-free PEC aptasensor was developed by deposition of DNA aptamer onto the PEC platform and then ultrasensitive assay of BNP-32 based on a "signal off" model. The biosensor showed a wide linear range (1 pg mL^-1- 0.1 μg mL^-1) with a limit of detection (LOD) as low as 0.14 pg mL^-1. This doping technique of ZnO nanomaterials provides some valuable guidelines for synthesis of advanced PEC probes in bioanalysis.

A Valuable Product of Microbial Cell Factories: Microbial Lipase

As a powerful factory, microbial cells produce a variety of enzymes, such as lipase. Lipase has a wide range of actions and participates in multiple reactions, and they can catalyze the hydrolysis of triacylglycerol into its component free fatty acids and glycerol backbone. Lipase exists widely in nature, most prominently in plants, animals and microorganisms, among which microorganisms are the most important source of lipase. Microbial lipases have been adapted for numerous industrial applications due to their substrate specificity, heterogeneous patterns of expression and versatility (i.e., capacity to catalyze reactions at the extremes of pH and temperature as well as in the presence of metal ions and organic solvents). Now they have been introduced into applications involving the production and processing of food, pharmaceutics, paper making, detergents, biodiesel fuels, and so on. In this mini-review, we will focus on the most up-to-date research on microbial lipases and their commercial and industrial applications. We will also discuss and predict future applications of these important technologies.

Expression of novel acidic lipase from Micrococcus luteus in Pichia pastoris and its application in transesterification

Background

Lipases are promising biocatalysts for industrial applications and attract attention to be explored. A novel acidic lipase has been isolated from the lipolytic bacteria Micrococcus luteus EMP48-D (LipEMP48-D) screened from tempeh. The lipase gene had previously been overexpressed in Escherichia coli BL21, but the expression level obtained was relatively low. Here, to improve the expression level, the lipase gene was cloned to Pichia pastoris. We eliminated the native signal sequence of M. luteus and replaced it with α-mating factor (α-MF) signal sequence. We also optimized and synthesized the lipase gene based on codon preference in P. pastoris.

Results

LipEMP48-D lipase was expressed as an extracellular protein. Codon optimization has been conducted for 20 codons, with the codon adaption index reaching 0.995. The highest extracellular lipase activity obtained reached 145.4 ± 4.8 U/mg under AOX1 promoter in P. pastoris KM71 strain, which was 9.7-fold higher than the previous activity in E. coli. LipEMP48-D showed the highest specific activity at pH 5.0 and stable within the pH range 3.0–5.0 at 40 °C. LipEMP48-D also has the capability of hydrolyzing various long-chain triglycerides, particularly olive oil (100%) followed by sunflower oil (88.5%). LipEMP48-D exhibited high tolerance for various polar organic solvents with low log P, such as isopropanol (115.7%) and butanol (114.6%). The metal ions (Na⁺, K⁺, Ca²⁺, Mg²⁺, Mn⁺) decreased enzyme activity up to 43.1%, while Fe²⁺ increased relative activity of enzymes up to 200%. The conversion of free fatty acid (FFA) into fatty acid methyl ester (FAME) was low around 2.95%.

Conclusions

This study was the first to report overexpression of Micrococcus lipase in yeast. The extracellular expression of this acidic lipase could be potential for biocatalyst in industrial fields, especially organic synthesis, food industry, and production of biodiesel.

Proline-Modified UIO-66 as Nanocarriers to Enhance Candida rugosa Lipase Catalytic Activity and Stability for Electrochemical Detection of Nitrofen

Immobilization can be used to improve the stability of lipases and enhances lipase recovery and reusability, which increases its commercial value and industrial applications. Nevertheless, immobilization frequently causes conformational changes of the lipases, which decrease lipase catalytic activity. in the present work, we synthesized UIO-66 and grafted UIO-66 crystals with proline for immobilization of Candida rugosa lipase (CRL). As indicated by steady-state fluorescence microscopy, grafting of proline onto UIO-66 crystals induced beneficial conformational change in CRL. CRL immobilized on UIO-66/Pro (CRL@UIO-66/Pro) demonstrated higher enzyme activity and better recyclability than that immobilized on UIO-66 (CRL@UIO-66) in both hydrolysis (CRL@UIO-66/Pro: 0.34 U; CRL@UIO-66: 0.15 U) and transesterification (CRL@UIO-66/Pro: 0.93 U; CRL@UIO-66: 0.25 U) reactions. The higher values of k_cat and k_cat/K_m of CRL@UIO-66/Pro also showed that it had better catalytic efficiency as compared to CRL@UIO-66. It is also worth noting that CRL@UIO-66/Pro (0.93 U) demonstrated a much higher transesterification activity as compared to free CRL (0.11 U), indicating that UIO-66/Pro has increased the solvent stability of CRL. Both CRL@UIO-66 and CRL@UIO-66/Pro were also used for the fabrication of biosensors for nitrofen with a wide linear range (0-100 μM), lower limit of detection, and good recovery rate.

Cobalt-iron zeolitic imidazolate frameworks (ZIFs) as microfibers for the effective detection of hydroquinone

The monitoring of pollutants has received significant attention from researchers in recent years owing to their hazardous nature and their toxic effect on the environment. Among them, water pollution plays a major role and results in dominant diseases along with life-long health problems. Hydroquinone (HQ), the major metabolite of benzene, is an industrially used organic compound which causes symptoms associated with nervous related disorders, such as faintness, therefore the research community has been inspired to detect sources of this carcinogenic agent. In this work, cobalt-iron based zeolitic imidazolate framework microfibers (CoFe-ZIF-MFs) were used for the selective detection of HQ. Micro-structured CoFe-ZIF fibers were fabricated using the wet chemical and electrospinning method. The electrochemical response of the prepared composite revealed an excellent redox behavior towards HQ and does not suffer from interference resulting from other analytes. The proposed sensor exhibited a wide linear range of 1 μM-1 mM with a detection limit of 230 nM, resulting in a good stability of up to 88%, even after 250 cycles. The designed sensor showed an exquisite performance for real sample analysis which indicates the device mechanism is reliable for use in environmental monitoring, public health care, industrialized areas and waste water management systems.

Metal Organic Framework steered electrosynthesis of anisotropic gold nanorods for specific sensing of organophosphate pesticides in vegetables collected from the field

The uncontrolled use of organophosphate (OP) group of pesticides has led to their accumulation in food and vegetables, causing major health issues. Hence, the development of a reliable sensor is imperative for the detection of neurotoxic organophosphates (OP). In the present study, we have intertwined the interfaces of a Metal Organic Framework (MOF), MOF-directed rapid electrochemically grown gold nanorods (aAuNR), cysteamine (Cys) functionalization, and the neurotransmitter acetylcholinesterase (AChE) to fabricate a novel electrochemical bioprobe AChE/Cys/aAuNR/MOF/ITO for sensing OP pesticides with an ultra-low detection limit of 3 ng L-1 over a linear range of 30 to 600 ng L-1. Prior to sensing, in silico docking studies were employed for tracking the structural aspects of the molecular recognition of specific OP as potential inhibitors. The sensor can quantify residues of sprayed OP (chlorpyrifos, malathion, parathion, methyl parathion, ethion) in field vegetables (Abelmoschus esculentus, Solanum melongena, Capsicum annuum, Momordica charantia Linn) using a single calibration curve designed using chlorpyrifos, and the results were validated via gas chromatography-electron capture detector (GC-ECD) measurements. The inhibition rate kinetics of structurally different OP (chlorpyrifos, malathion, methyl parathion) were studied via the bioprobe and further validated using the standard Ellman method, confirming the practical applicability of the sensor for the detection of a specific group of OP. The bioprobe AChE/Cys/aAuNR/MOF/ITO offers good stability, specificity, and anti-interference properties for the detection of OP in real samples.

Lipase immobilization on UiO-66/poly(vinylidene fluoride) hybrid membranes and active catalysis in the vegetable oil hydrolysis

This is the first report in which UiO-66/PVDF hybrid membranes with high immobilization efficiency for lipase were constructed.

Biosensors and Bioassays Based on Lipases, Principles and Applications, a Review

Lipases are enzymes responsible for the conversion of triglycerides and other esterified substrates, they are involved in the basic metabolism of a wide number of organisms, from a simple microorganism and to mammals. They also have broad applicability in many fields from which industrial biotechnology, the production of cleaning agents, and pharmacy are the most important. The use of lipases in analytical chemistry where it can serve as a part of biosensors or bioassays is an application of growing interest and has become another important use. This review is focused on the description of lipases chemistry, their current applications and the methods for their assay measurement. Examples of bioassays and biosensors, including their physical and chemical principles, performance for specific substrates, and discussion of their relevance, are given in this work.

Electrochemical determination of methyl parathion based on pillar[5]arene@AuNPs@reduced graphene oxide hybrid nanomaterials

The detection of pesticides has become a very important and critical research area because of the rapid development of agriculture and strict environmental protection regulations.