A comparative study on conventionally prepared MnFe2O4 nanospheres and template-synthesized novel MnFe2O4 nano-agglomerates as the electrodes for biosensing of mercury contaminations and supercapacitor applications

Cobalt molybdate hollow spheres decorated graphitic carbon nitride sheets for electrochemical sensing of dimetridazole

In the present work, a cobalt molybdate (CoMoO4) hollow spheres-incorporated graphitic carbon nitride (g-CN) composite is prepared for the electrochemical detection of dimetridazole (DZ). The synergistic effect between the hollow-structured CoMoO4 and g-CN nanosheets facilitates the transportation of electrons through kinetic barriers, thereby providing a high electrical conductivity with increased electroactive sites. The proposed CoMoO4@g-CN-modified electrode displayed a wide linear range (0.001-492.77 μM) and a lower detection limit (LOD: 0.4 nM) for the determination of DZ through the amperometry (i-t) method. In addition, the CoMoO4@g-CN-modified electrode achieved good operational stability, anti-interfering ability (five-fold excess amount of co-interfering compounds) and reproducibility. These results demonstrate the increased electrocatalytic activity of CoMoO4@g-CN modified glassy carbon electrode (GCE) towards the detection of DZ in food samples with satisfactory recovery ranges.

Deep Eutectic Solvent-Assisted Synthesis of a Strontium Tungstate Bifunctional Catalyst: Investigation on the Electrocatalytic Determination and Photocatalytic Degradation of Acetaminophen and Metformin Drugs

In this work, we propose a modified solid-state approach for the sustainable preparation of a SrWO₄ bifunctional catalyst using thymol-menthol-based natural deep eutectic green solvents (NADESs). Various spectroscopic and morphological techniques analyzed the as-synthesized SrWO₄ particles. Acetaminophen (ATP) and metformin (MTF) were selected as the model drug compounds. The electrochemical detection and photocatalytic degradation of ATP and MTF upon ultraviolet-visible (UV-vis) light irradiation in the presence of as-prepared SrWO₄ particles as an active catalyst are examined. The present study displayed that the proposed catalyst SrWO₄ has enhanced catalytic activity in achieving the optimum experimental conditions, and linear ranges of ATP = 0.01-25.90 μM and MTF = 0.01-25.90 μM, a lower limit of detection (LOD) value (ATP = 0.0031 μM and MTF = 0.008 μM), and higher sensitivity toward ATP and MTF determination were obtained. Similarly, the rate constant was found to be k = ATP = 0.0082 min^-1 and MTF = 0.0296 min^-1 according to the Langmuir-Hinshelwood model, benefitting from the excellent synergistic impact of the SrWO₄ catalyst toward the photocatalytic degradation of the drug molecule. Hence, this work offers innovative insights into the applicability of the as-prepared SrWO₄ bifunctional catalyst as an excellent functional material for the remediation of emerging pollutants in water bodies with a recovery range of 98.2-99.75%.

A Low Cost Fe3O4-Activated Biochar Electrode Sensor by Resource Utilization of Excess Sludge for Detecting Tetrabromobisphenol A

Owing to its ubiquity in natural water systems and the high toxicity of its accumulation in the human body, it is essential to develop simple and low-cost electrochemical sensors for the determination of 3,3',5,5'-tetrabromobisphenol A (TBBPA). In this work, Fe3O4-activated biochar, which is based on excess sludge, was prepared and characterized using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR) and BET analysis to analyze its basic features. Subsequently, it was used to fabricate an electrochemical sensor for the detection of TBBPA. The electrochemical test results revealed that the Fe3O4-activated biochar film exhibited a larger active surface area, a lower charge transfer resistance and a higher accumulation efficiency toward TBBPA. Consequently, the peak current of TBBPA was significantly enhanced on the surface of the Fe3O4-activated biochar. The TBBPA sensing platform developed using the Fe3O4-activated biochar composite film, with relatively a lower detection limit (3.2 nM) and a wider linear range (5-1000 nM), was successfully utilized to determine TBBPA levels in water samples. In summary, the effective application of Fe3O4-activated biochar provided eco-friendly and sustainable materials for the development of a desirable high-sensitivity sensor for TBBPA detection.

Carbon Materials in Electroanalysis of Preservatives: A Review

Electrochemical sensors in electroanalysis are a particularly useful and relatively simple way to identify electroactive substances. Among the materials used to design sensors, there is a growing interest in different types of carbon. This is mainly due to its non-toxic properties, low cost, good electrical conductivity, wide potential range, and the possibility of using it in both aqueous and nonaqueous media. The electrodes made of carbon, and especially of carbon modified with different materials, are currently most often used in the voltammetric analysis of various compounds, including preservatives. The objective of this paper is to present the characteristics and suitability of different carbon materials for the construction of working electrodes used in the voltammetric analysis. Various carbon materials were considered and briefly discussed. Their analytical application was presented on the example of the preservatives commonly used in food, cosmetic, and pharmaceutical preparations. It was shown that for the electroanalysis of preservatives, mainly carbon electrodes modified with various modifiers are used. These modifications ensure appropriate selectivity, high sensitivity, low limits of detection and quantification, as well as a wide linearity range of voltammetric methods of their identification and determination.

Toward the Development of Disposable Electrodes Based on Holmium Orthovanadate/f-Boron Nitride: Impacts and Electrochemical Performances of Emerging Inorganic Contaminants

Rare-earth metal orthovanadates have great technological relevance in the family of rare-earth compounds owing to their excellent physical and chemical properties. A significant number of studies have been carried out on this class of compounds to exploit their electrochemical properties in virtue of variable oxidation states. But holmium vanadate (HoV) and its morphology selective synthesis have not been considered, which can have potential applications similar to the rest of the family. In this work, we propose the synthesis of superior architectures of HoV with a functionalized boron nitride (f-BN) nanocomposite. The synergistic effect between HoV and f-BN can have a positive effect on the physical characteristics of the nanocomposite, which can be explored for its electrochemical capacity. Here, HoV incorporated with f-BN is explored for the electrochemical detection of Hg²⁺ ions, which is known for its toxicity-induced environmental health hazards. The structural and compositional revelation reveals higher conductivity and faster electron transfer in the composite, which facilitates a wide working range (0.02-53.8 and 64.73-295.4 μM), low limit of detection (5 nM), higher sensitivity (66.6 μA μM^-1 cm^-2), good selectivity over 10-fold higher concentration of other interfering compounds compared to Hg²⁺ ion concentration, and good cycles stability (30 segments) toward Hg²⁺ ion detection. This also envisages the morphology selective synthesis and utilization of other rare-earth metals, whose electrochemical capacities are unexplored.

Development of an Electrochemical Sensor Based on Nanocomposite of Fe3O4@SiO2 and Multiwalled Carbon Nanotubes for Determination of Tetracycline in Real Samples

In this work, an electrochemical sensor (GCE/MWCNT/Fe3O4@SiO2) based on a composite of multiwalled carbon nanotubes (MWCNT) and an Fe3O4@SiO2 (MMN) nanocomposite on a glassy carbon electrode (GCE) was developed for the detection of tetracycline (TC). The composite formed promoted an increased electrochemical signal and the stability of the sensor, combining its individual characteristics such as high electrical conductivity and large surface area. The composite material was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Mössbauer spectroscopy, and scanning electron microscope (SEM). The adsorptive stripping differential pulse voltammetry (AdSDPV) promoted better performance for the electrochemical sensor and greater sensitivity for TC detection. Under optimized conditions, the currents increased linearly with TC concentrations from 4.0 to 36 µmol L−1 (0.997) and from 40 to 64 µmol L−1 (0.994) with detection and quantification limits of 1.67 µmol L−1 and 4.0 µmol L−1, respectively. The sensor was applied in the analysis of milk and river water samples, obtaining recovery values ranging from 91–117%.

Enhanced electrochemical and capacitive deionization performance of metal organic framework/holey graphene composite electrodes

In this paper, we designed and prepared a novel metal organic framework (MOF)/holey graphene (HG) composites as electrode materials for electrochemistry and capacitive deionization (CDI). The MOF nanoparticles were attached to the surface of the HG sheets to form layered porous structure, which promoted the transport of ions and electrons in the electrode/electrolyte interfaces. Additionally, the synergistic effect of these composite electrodes, which combined pseudocapacitance performance of MOF and the high conductivity of graphene, contributed to enhancing the performance of electrochemistry and CDI. The MOF/HG-2 exhibited high capacitances of 526 F g^-1 at current rates of 0.1 A g^-1, low charge transfer resistance of 0.53 Ω, and excellent cycling stability (retention of about 90.3% after 5000 cycles at 2 A g^-1). As electrode materials for CDI, the MOF/HG-2 displayed a remarkable electrosorption capacity of 39.6 mg g^-1 with initial salt concentration of 800 mg L^-1, and there was no obvious attenuation after 20 CDI regeneration cycles. These results confirmed that MOF/HG was a promising electrode material for the actual application of CDI.

Green sonochemical synthesis and fabrication of cubic MnFe2O4 electrocatalyst decorated carbon nitride nanohybrid for neurotransmitter detection in serum samples

The binary nanomaterials and graphitic carbon based hybrid has been developed as an important porous nanomaterial for fabricating electrode with applications in non-enzymatic (bio) sensors. We report a fast synthesis of bimetal oxide particles of nano-sized manganese ferrite (MnFe2O4) decorated on graphitic carbon nitride (GCN) via a high-intensity ultrasonic irradiation method for C (30 kHz and 70 W/cm2). The nanocomposites were analyzed by powder X-ray diffraction, XPS, EDS, TEM to ascertain the effects of synthesis parameters on structure, and morphology. The MnFe2O4/GCN modified electrode demonstrated superior electrocatalytic activity toward the neurotransmitter (5-hydroxytryptamine) detection with a high peak intensity at +0.21 V. The appealing application of the MnFe2O4/GCN/GCE as neurotransmitter sensors is presented and a possible sensing mechanism is analyzed. The constructed electrochemical sensor for the detection of 5-hydroxytryptamine (STN) showed a wide working range (0.1-522.6 μM), high sensitivity (19.377 μA μM-1 cm-2), and nano-molar detection limit (3.1 nM). Moreover, it is worth noting that the MnFe2O4/GCN not only enhanced activity and also promoted the electron transfer rate towards STN detection. The proposed sensor was analyzed for its real-time applications to the detection of STN in rat brain serum, and human blood serum in good satisfactory results was obtained. The results showed promising reproducibility, repeatability, and high stability for neurotransmitter detection in biological samples.

Sustainable synthesis of AFe2O4 (A = Mg, Zn, Mn) catalysts: comparing the photooxidative and electrochemical properties towards organic dyes detection and degradation

By serving as alternatives to toxic and hazardous solvents, green solvents assist in implementing the idea of sustainability.

A Highly Sensitive "on-off" Time-Resolved Phosphorescence Sensor Based on Aptamer Functionalized Magnetite Nanoparticles for Cadmium Detection in Food Samples

Cadmium contamination is a severe threat to food safety. Therefore, the development of sensitive and selective cadmium detection strategies is urgently required. The elimination of background autofluorescence generated from the food matrix is critical to the optical assay for cadmium detection. Herein, a time-resolved phosphorescence sensor based on an "on-off" strategy was developed for cadmium determination in food samples. The phosphorescence nanoparticles were used as a luminous material to minimize the interference of background autofluorescence. The cadmium-binding aptamer was immobilized onto the magnetic beads and combined with a black hole quencher 1 (BHQ1) with complementary DNA as the target recognition element. With the presence of cadmium, the cadmium-binding aptamer bound to cadmium specifically and resulted in the release of BHQ1. The free BHQ1 remained in the solution after magnetic separation and quenched the phosphorescence. The phosphorescence intensity was negatively related to the concentration of cadmium. Under optimal conditions, the time-resolved phosphorescence sensor showed a linear response to cadmium concentration within a range from 0.05 to 5 ng mL-1 and with a detection limit of 0.04 ng mL-1. This "on-off" time-resolved phosphorescence sensor was successfully applied for cadmium detection in spring water and clam samples, which provided a rapid and straightforward method.

A Review of Battery Materials as CDI Electrodes for Desalination

The world is suffering from chronic water shortage due to the increasing population, water pollution and industrialization. Desalinating saline water offers a rational choice to produce fresh water thus resolving the crisis. Among various kinds of desalination technologies, capacitive deionization (CDI) is of significant potential owing to the facile process, low energy consumption, mild working conditions, easy regeneration, low cost and the absence of secondary pollution. The electrode material is an essential component for desalination performance. The most used electrode material is carbon-based material, which suffers from low desalination capacity (under 15 mg·g−1). However, the desalination of saline water with the CDI method is usually the charging process of a battery or supercapacitor. The electrochemical capacity of battery electrode material is relatively high because of the larger scale of charge transfer due to the redox reaction, thus leading to a larger desalination capacity in the CDI system. A variety of battery materials have been developed due to the urgent demand for energy storage, which increases the choices of CDI electrode materials largely. Sodium-ion battery materials, lithium-ion battery materials, chloride-ion battery materials, conducting polymers, radical polymers, and flow battery electrode materials have appeared in the literature of CDI research, many of which enhanced the deionization performances of CDI, revealing a bright future of integrating battery materials with CDI technology.

Deep eutectic solvent-based manganese molybdate nanosheets for sensitive and simultaneous detection of human lethal compounds: comparing the electrochemical performances of M-molybdate (M = Mg, Fe, and Mn) electrocatalysts

Potentially hazardous chemical contaminants endanger the environment and human well-being, challenging scientists and policy makers to develop holistic alternative approaches for remediation. The addition or accumulation of these chemicals can have a series of far-reaching consequences and have direct and indirect effects at multiple levels of ecological organization. Therefore, the development of a sensitive tool for the comprehensive evaluation of chemical concentrations is highly relevant. Herein, we thus report the simultaneous electrochemical detection of highly toxic hydroquinone (HQ), Hg²⁺, and nitrite (NO₂^-) compounds using nanostructured metal molybdate (M = Mg, Fe and Mn) catalysts. These functional nanomaterials are synthesized using a deep eutectic solvent (DES) modified hydrothermal method that provides sustainable aspects and energy efficient synthesis strategies. Choline chloride (ChCl)-urea DES used in this study exhibits an all-in-one behaviour by simultaneously acting as a template, reducing agent, and homogeneous means for stabilizing metal ions. This stimulates the fabrication of hierarchical structures of metal molybdates with high surface activities that cause their remarkable properties with minimal waste generation. The structural, morphological, catalytic, and electrochemical capacities of the as-synthesized MgMoO₄, Fe₂(MoO₄)₃, and MnMoO₄ materials are explored through various techniques and comparatively, MnMoO₄ presents superior characterization features such as a reduced particle size, increased surface area and hierarchical architectures. Owing to the exceptional physicochemical attributes, the MnMoO₄ modified glassy carbon electrode (GCE) demonstrates superior electrochemical activities towards the individual and simultaneous detection of HQ, Hg²⁺, and NO₂^-. Well-defined and separate peaks are observed for the simultaneous detection of HQ, Hg²⁺, and NO₂^- which is influenced by the binding energies of these pollutants. Furthermore, the modified electrode exhibits a high sensitivity of 23.8, 17.7 and 10.2 μA μM^-1 cm^-2 with a limit of detection (LOD) of 0.026, 0.05, and 0.01 μM for HQ, Hg²⁺, and NO₂^- respectively under ideal conditions. Also, the reproducibility and anti-interference ability reinforce the application potential of the MnMoO₄ modified electrode for the simultaneous electrochemical detection of HQ, Hg²⁺, and NO₂^- in real samples with better recoveries, thus assessing the effect of these hazardous chemicals on humanity.

Highly sensitive determination of cancer toxic mercury ions in biological and human sustenance samples based on green and robust synthesized stannic oxide nanoparticles decorated reduced graphene oxide sheets

This work proposes the conventional sonochemical synthesis of nanoparticles of tin (IV) oxide on reduced graphene oxide (rGOS@SnO₂) influencing the formation of a composite with enhanced properties. The combination of SnO₂ nanoparticles with rGOS weakens the accumulation in layered structures of the latter system, which leads to better exposure of SnO₂ active sites and thus increases the conductivity of rGOS@SnO₂ composite. This validates the improved electro-catalytic activity of the composite based on previous reports for its successful utilization in the electrochemical determination of toxic contaminants. The quantitative determination of mercury ions, through the use of the electrochemical sensor based on rGOS@SnO₂ manifests several advantages such as simple operator, promptness, cost effectiveness and time independency when compared to other traditional techniques. The fabricated sensor displays two wide linear responses in the range of 0.25-705.3 μM for mercury ions, with a rapid response time about 1 s, and with a high sensitivity of 10.18 μA μM^-1 cm^-2 under optimized conditions. The accumulation of traces of mercury in the bodies of fish in the marine eco system marks the significance of its detection in real samples. The satisfactory results of the proposed sensor establish the supreme efficacy of layered nanomaterials in conjunction with nanoparticles for the simple, rapid and efficient detection of pollutants in food and biological samples.

Evaluating an effective electrocatalyst for the rapid determination of triptan drug (Maxalt™) from (mono and binary) transition metal (Co, Mn, CoMn, MnCo) oxides via electrochemical approaches

In this article, an ultra sensitive and selective electrochemical sensor for the detection of Rizatriptan benzoate (RZB) was reported.

Design and Regulation of Novel MnFe2O4@C Nanowires as High Performance Electrode for Supercapacitor

Bimetallic oxides have been considered as potential candidates for supercapacitors due to their relatively high electric conductivity, abundant redox reactions and cheapness. However, nanoparticle aggregation and huge volume variation during charging-discharging procedures make it hard for them to be applied widely. In this work, one-dimensional (1D) MnFe₂O₄@C nanowires were in-situ synthesized via a simply modified micro-emulsion technique, followed by thermal treatment. The novel 1D and core-shell architecture, and in-situ carbon coating promote its electric conductivity and porous feature. Due to these advantages, the MnFe₂O₄@C electrode exhibits a high specific capacitance of 824 F·g⁻¹ at 0.1 A·g⁻¹ and remains 476 F·g⁻¹ at 5 A·g⁻¹. After 10,000 cycles, the capacitance retention of the MnFe₂O₄@C electrode is up to 93.9%, suggesting its excellent long-term cycling stability. After assembling with activated carbon (AC) to form a MnFe₂O₄@C//AC device, the energy density of this MnFe₂O₄@C//AC device is 27 W·h·kg⁻¹ at a power density of 290 W·kg⁻¹, and remains at a 10 W·h·kg⁻¹ energy density at a high power density of 9300 W·kg⁻¹.