Tuning optical and electronic properties in novel carbazole photosensitizers for p-type dye-sensitized solar cells

Simple A-D2-A Nonfullerene Acceptors for Efficient Binary Bulk Heterojunction Organic Solar Cells

Two new nonfused ring nonfullerene electron acceptors, NFAs, (dicarbazolyl)bis(2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile) (MDCzM-4H) and -(2-(5,6-fluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile) (MDCzM-4F), thus exhibiting an A-D2-A motif, were synthesized and characterized. As thin films, they exhibit the lowest energy absorption signature near 540 nm, extending down to ∼700 nm. This band is due to an intramolecular charge transfer process from the DCz (nonfused dicarbazoyl; DCz) moiety to the malononitrile-based units (M) based on density functional theory calculations (DFT), which are also corroborated by time-dependent DFT (TDDFT) computations. Both NFAs fluoresce in the near-IR region exhibiting a band maximum peaking near 750 nm with biphasic lifetimes in the 75-410 ps time scale. Electrochemical measurements permitted the determination of their HOMO (∼-5.7 eV) and LUMO (∼-4.0 eV) energies. The absorption bands are complementary to those of the commercial copolymer PTB7-Th, which was used to prepare binary blends for photovoltaic cell performance assessments (ITO/PEDOT:PSS/active layer/PFN-Br/Ag). The power conversion efficiencies (PCE) are found to be 10.17% for MDCzM-4H/PTB7-Th (short-circuit current JSC = 15.87 mA cm-2; open-circuit voltage VOC = 1.03 V; fill factor FF = 0.622) and 14.09% for MDCzM-4F/PTB7-Th (JSC = 20.92 mA cm-2; VOC = 0.965 V; FF = 0.698). The use of nonfused ring NFAs achieving such high performances is significant and reveals a path toward simpler NFAs for use in organic photovoltaics.

Electrochromic and Energy Storage Performance Enhancement by Introducing Jahn-Teller Distortion: Experimental and Theoretical Study

Aqueous electrochromic batteries (ECBs) have recently garnered significant attention within the realm of renewable rechargeable technology due to their potential applicability in diverse multifunctional devices featuring visible-level indicator batteries. However, there exists an imperative to comprehend the underlying structural factors that contribute to achieving an elevated electrochemical performance. In this context, we have synthesized and compared WO3·H2O (HWO) specifically for heightened ECB application as against the performance of a standard anhydrous WO3 (AWO). To unravel the underlying cause, a density functional theory (DFT) investigation is carried out, disclosing a structural deformation of HWO, unlike AWO, due to Jahn-Teller distortion induced by the presence of interlayer water. It results in a fully compatible HWO ion host to devise a zinc-ion aqueous electrolyte electrochromic battery, exhibiting superior redox reactivity, optical modulation (50%), capacity (200 mAh/m2), and cyclic stability. To glean insights into the dynamic structural alterations during the intercalation and deintercalation processes of Zn2+, ex situ X-ray diffraction and Raman spectroscopic studies are carried out. These investigations culminate in the determination that HWO films are better suited for the application than their AWO counterparts. This finding holds promise for advancing the applications of ECBs and represents a significant step forward in this field.

Complete characterization of RNA biomarker fingerprints using a multi-modal ATR-FTIR and SERS approach for label-free early breast cancer diagnosis

Breast cancer is a prevalent form of cancer worldwide, and the current standard screening method, mammography, often requires invasive biopsy procedures for further assessment. Recent research has explored microRNAs (miRNAs) in circulating blood as potential biomarkers for early breast cancer diagnosis. In this study, we employed a multi-modal spectroscopy approach, combining attenuated total reflection Fourier transform infrared (ATR-FTIR) and surface-enhanced Raman scattering (SERS) to comprehensively characterize the full-spectrum fingerprints of RNA biomarkers in the blood serum of breast cancer patients. The sensitivity of conventional FTIR and Raman spectroscopy was enhanced by ATR-FTIR and SERS through the utilization of a diamond ATR crystal and silver-coated silicon nanopillars, respectively. Moreover, a wider measurement wavelength range was achieved with the multi-modal approach than with a single spectroscopic method alone. We have shown the results on 91 clinical samples, which comprised 44 malignant and 47 benign cases. Principal component analysis (PCA) was performed on the ATR-FTIR, SERS, and multi-modal data. From the peak analysis, we gained insights into biomolecular absorption and scattering-related features, which aid in the differentiation of malignant and benign samples. Applying 32 machine learning algorithms to the PCA results, we identified key molecular fingerprints and demonstrated that the multi-modal approach outperforms individual techniques, achieving higher average validation accuracy (95.1%), blind test accuracy (91.6%), specificity (94.7%), sensitivity (95.5%), and F-score (94.8%). The support vector machine (SVM) model showed the best area under the curve (AUC) characterization value of 0.9979, indicating excellent performance. These findings highlight the potential of the multi-modal spectroscopy approach as an accurate, reliable, and rapid method for distinguishing between malignant and benign breast tumors in women. Such a label-free approach holds promise for improving early breast cancer diagnosis and patient outcomes.

KuQuinones: a ten years tale of the new pentacyclic quinoid compound

Quinones are widespread in nature, as they participate, mainly as redox mediators, in several biochemical processes. Up to now, various synthetic quinones have been recommended in the literature as leading molecules in energy, biomedical and catalytic fields. In this brief review, we retraced our research activity in the last ten years, mainly dedicated to the study of a new class of peculiar pentacyclic conjugated quinoid compounds, synthesized in our group. In particular, their application as sensitive materials in photoelectrochemical devices and in biosensors, as photocatalysts in selective oxidation reactions, and their anticancer activity is here reviewed.

Dye-sensitized solar cells strike back

Dye-sensitized solar cells (DSCs) are celebrating their 30th birthday and they are attracting a wealth of research efforts aimed at unleashing their full potential. In recent years, DSCs and dye-sensitized photoelectrochemical cells (DSPECs) have experienced a renaissance as the best technology for several niche applications that take advantage of DSCs' unique combination of properties: at low cost, they are composed of non-toxic materials, are colorful, transparent, and very efficient in low light conditions. This review summarizes the advancements in the field over the last decade, encompassing all aspects of the DSC technology: theoretical studies, characterization techniques, materials, applications as solar cells and as drivers for the synthesis of solar fuels, and commercialization efforts from various companies.

Stable Organic Passivated Carbon Nanotube-Silicon Solar Cells with an Efficiency of 22

The organic passivated carbon nanotube (CNT)/silicon (Si) solar cell is a new type of low-cost, high-efficiency solar cell, with challenges concerning the stability of the organic layer used for passivation. In this work, the stability of the organic layer is studied with respect to the internal and external (humidity) water content and additionally long-term stability for low moisture environments. It is found that the organic passivated CNT/Si complex interface is not stable, despite both the organic passivation layer and CNTs being stable on their own and is due to the CNTs providing an additional path for water molecules to the interface. With the use of a simple encapsulation, a record power conversion efficiency of 22% is achieved and a stable photovoltaic performance is demonstrated. This work provides a new direction for the development of high-performance/low-cost photovoltaics in the future and will stimulate the use of nanotubes materials for solar cells applications.

Solution Processed Zn1-x-ySmxCuyO Nanorod Arrays for Dye Sensitized Solar Cells

Cu- and Sm-doped ZnO nanorod arrays were grown with 1 wt% of Sm and different weight percents (0.0, 0.5, 1.0 and 1.5 wt%) of Cu by two-step hydrothermal method. The influence of Cu concentration and precursor of Sm on the structural, optical and photovoltaic properties of ZnO nanorod arrays was investigated. An X-ray diffraction study showed that the nanorod arrays grown along the (002) plane, i.e., c-axis, had hexagonal wurtzite crystal structure. The lattice strain is present in all samples and shows an increasing trend with Cu/Sm concentration. Field emission scanning electron microscopy was used to investigate the morphology and the nanorod arrays grown vertically on the FTO substrates. The diameter of nanorod arrays ranged from 68 nm to 137 nm and was found highly dependent on Cu concentration and Sm precursor while the density of nanorod arrays almost remains the same. The grown nanorod arrays served as photoelectrodes for fabricating dye-sensitized solar cells (DSSCs). The overall light to electricity conversion efficiency ranged from 1.74% (sample S₁, doped with 1 wt% of Sm and 0.0 wt% of Cu) to more than 4.14% (sample S₄, doped with 1 wt% of Sm and 1.5 wt% of Cu), which is 60% higher than former sample S1. The increment in DSSCs efficiency is attributed either because of the doping of Sm³⁺ ions which increase the absorption region of light spectrum by up/down conversion or the doping of Cu ions which decrease the recombination and backward transfer of photo-generated electrons and increase the electron transport mobility. This work indicates that the coupled use of Cu and Sm in ZnO nanorod array films have the potential to enhance the performance of dye-sensitized solar cells.

An Overview on Anodes for Magnesium Batteries: Challenges towards a Promising Storage Solution for Renewables

Magnesium-based batteries represent one of the successfully emerging electrochemical energy storage chemistries, mainly due to the high theoretical volumetric capacity of metallic magnesium (i.e., 3833 mAh cm-3 vs. 2046 mAh cm-3 for lithium), its low reduction potential (-2.37 V vs. SHE), abundance in the Earth's crust (104 times higher than that of lithium) and dendrite-free behaviour when used as an anode during cycling. However, Mg deposition and dissolution processes in polar organic electrolytes lead to the formation of a passivation film bearing an insulating effect towards Mg2+ ions. Several strategies to overcome this drawback have been recently proposed, keeping as a main goal that of reducing the formation of such passivation layers and improving the magnesium-related kinetics. This manuscript offers a literature analysis on this topic, starting with a rapid overview on magnesium batteries as a feasible strategy for storing electricity coming from renewables, and then addressing the most relevant outcomes in the field of anodic materials (i.e., metallic magnesium, bismuth-, titanium- and tin-based electrodes, biphasic alloys, nanostructured metal oxides, boron clusters, graphene-based electrodes, etc.).

Interfacial electronic features in methyl-ammonium lead iodide and p-type oxide heterostructures: new insights for inverted perovskite solar cells

First-principles simulations unveil the interface electronic structures of MAPI/NiO and MAPI/CuGaO₂ heterojunctions in inverted perovskite solar cells.

Naphthalene imides as novel p-type sensitizers for NiO-based p-type dye-sensitized solar cells

We report two efficient materials for p-type dye-sensitized solar cells, namely S64 and S85. Novel p-type photosensitizers for NiO-based p-type dye-sensitized solar cells are presented in this study.

Photolysis of dimethoxynitrobenzyl-"caged" acids yields fluorescent products

Carboxylic acids conjugated with 4,5-dimethoxy-2-nitrobenzyl photoremovable protecting group are well known and widely used for biological studies. In this paper, we study the photolysis of likewise “caged” acetic, caprylic and arachidonic acids. Unexpectedly, we observed huge growth of fluorescence emission at ~430 nm during photolysis. Following further UV irradiation, a product with fluorescence at longer wavelength was formed (470 nm excitation / ~500–600 nm emission). While it may be used to monitor the “uncaging”, these fluorescent products may interfere with widespread dyes such as fluorescein in biomedical experiments. This effect might be negligible if the photolysis products dissolve in the medium. On the other hand, we observed that arachidonic and caprylic acids derivatives self-organize in emulsion droplets in water environment due to long lipophilic chains. Illumination of droplets by UV rapidly induces orange fluorescence excited by 488 nm light. This fluorescence turn-on was fast (~0.1 s) and apparently caused by the accumulation of water-insoluble fluorescent residuals inside droplets. These self-organized lipophilic structures with fluorescence turn-on capability may be of interest for biomedical and other application. We have identified and hypothesized some compounds which may be responsible for the observed fluorescense.

Control of Nitrogen Inhomogeneities in Type-I and Type-II GaAsSbN Superlattices for Solar Cell Devices

Superlattice structures (SLs) with type-II (GaAsSb/GaAsN) and -I (GaAsSbN/GaAs) band alignments have received a great deal of attention for multijunction solar cell (MJSC) applications, as they present a strongly intensified luminescence and a significant external quantum efficiency (EQE), with respect to the GaAsSbN bulk layers. Despite the difficulties in characterizing the distribution of N in dilute III-V nitride alloys, in this work we have obtained N-compositional mappings before and after rapid thermal annealing (RTA) in both types of structures, by using a recent methodology based on the treatment of different scanning transmission electron microscopy (STEM) imaging configurations. Texture analysis by gray level co-occurrence matrixes (GLCM) and the measurement of the degree of clustering are used to compare and evaluate the compositional inhomogeneities of N. Comparison with the Sb maps shows that there is no spatial correlation between the N and Sb distributions. Our results reveal that a better homogeneity of N is obtained in type-I SLs, but at the expense of a higher tendency of Sb agglomeration, and the opposite occurs in type-II SLs. The RTA treatments improve the uniformity of N and Sb in both designs, with the annealed sample of type-II SLs being the most balanced structure for MJSCs.

Ab initio Study of Anchoring Groups for CuGaO2 Delafossite-Based p-Type Dye Sensitized Solar Cells

Here we report the first theoretical characterization of the interface between the CuGaO₂ delafossite oxide and the carboxylic (–COOH) and phosphonic acid (–PO₃H₂) anchoring groups. The promising use of delafossites as effective alternative to nickel oxide in p-type DSSC is still limited by practical difficulties in sensitizing the delafossite surface. Thus, this work provides atomistic insights on the structure and energetics of all the possible interactions between the anchoring functional groups and the CuGaO₂ surface species, including the effects of the Mg doping and of the solvent medium. Our results highlight the presence of a strong selectivity toward the monodentate binding mode on surface Ga atoms for both the carboxylic and phosphonic acid groups. Since the binding modes have a strong influence on the hole injection thermodynamics, these findings have direct implications for further development of delafossite based p-type DSSCs.

The double perovskite structure effect of a novel La2CuNiO6-ZnSe-graphene nanocatalytic composite for dye sensitized solar cells as a freestanding counter electrode

Currently, the development of sensitized solar cells (DSSCs) with high power conversion efficiency and low cost is a major challenge in the academic and industrial fields.