Enhancement of bioelectricity generation by synergistic modification of vertical carbon nanotubes/polypyrrole for the carbon fibers anode in microbial fuel cell

Enhancing extracellular electron transfer through selective enrichment of Geobacter with Fe@CN-modified carbon-based anode in microbial fuel cells

Microbial fuel cells (MFCs) have been demonstrated as a renewable energy strategy to efficiently recover chemical energy stored in wastewater into clean electricity, yet the limited power density limits their practical application. Here, Fe-doped carbon and nitrogen (Fe@CN) nanoparticles were synthesized by a direct pyrolysis process, which was further decorated to fabricate Fe@CN carbon paper anode. The modified Fe@CN anode with a higher electrochemically active surface area was not only benefit for the adhesion of electrochemically active microorganisms (EAMs) and extracellular electron transfer (EET) between the anode and EAMs but also selectively enriched Geobacter, a typical EAMs species. Accordingly, the MFCs with Fe@CN anode successfully achieved a highest voltage output of 792.76 mV and a prolonged stable voltage output of 300 h based on the mixed culture feeding with acetate. Most importantly, the electroactive biofilms on Fe@CN anode achieved more content ratio of proteins to polysaccharides (1.40) in extracellular polymeric substances for the balance between EET and cell protection under a harsh environment. This work demonstrated the feasibility of development on anode catalysts for the elaboration of the catalytic principle about interface modification, which may contribute to the practical application of MFC in energy generation and wastewater treatment.

Functional Nanomaterial-Modified Anodes in Microbial Fuel Cells: Advances and Perspectives

Microbial fuel cell (MFC) is a promising approach that could utilize microorganisms to oxidize biodegradable pollutants in wastewater and generate electrical power simultaneously. Introducing advanced anode nanomaterials is generally considered as an effective way to enhance MFC performance by increasing bacterial adhesion and facilitating extracellular electron transfer (EET). This review focuses on the key advances of recent anode modification materials, as well as the current understanding of the microbial EET process occurring at the bacteria-electrode interface. Based on the difference in combination mode of the exoelectrogens and nanomaterials, anode surface modification, hybrid biofilm construction and single-bacterial surface modification strategies are elucidated exhaustively. The inherent mechanisms may help to break through the performance output bottleneck of MFCs by rational design of EET-related nanomaterials, and lead to the widespread application of microbial electrochemical systems.

Construction of a new type of three-dimensional honeycomb-structure anode in microbial electrochemical systems for energy harvesting and pollutant removal

Electrode materials occupy most of the construction cost of the microbial electrochemical system (MES), and the low mechanical strength and poor electrochemical performance of the commonly used traditional carbon-based materials restrict the promotion and application of this technology. In this study, polymer-based three-dimensional (3D) honeycomb-structure (HS) materials with good mechanical properties were used as supporting materials. Graphene (GR), carbon nanotube (CNT), and polypyrrole (PPy) was separately chosen as a surface conductivity coating layer for preparing MES anodes. The introduction of GR, CNT, and PPy on HS increased surface roughness, hydrophilicity, O and N content, electrochemically active surface area, and decreased charge transfer internal resistance, which promoted the adhesion of microorganisms on their surface and enhanced the extracellular electron transfer process at the electrode/microbe interface. The CNT-HS anode system got the better maximal power density (1700.7 ± 149.0 mW/m²) of the three modified anode systems and 3.60 times that of MES using CC (471.8 ± 27.2 mW/m²) as the anode. The accelerated reactions of the redox species in the outer cell membrane, the promoted electron shuttle secretion, and the enhanced abundance of the tricarboxylic acid cycle-related functional genes in biofilm led to better performance of the CNT-HS anode system. The CNT-HS anode system also exhibited long-term operational stability (>6 months) and a good chemical oxygen demand degradation effect. Furthermore, CNT-HS material exhibited its cost advantage, and its projected cost is estimated to be about $1.8/m², much lower than the currently used MES anodes ($8.2-548.2/m²). Considering the good mechanical properties, simple preparation process, low manufacturing cost, long-term stability, excellent bio-electrochemical performance, and good pollutant removal ability, HS-based anode has promising potential for high-performance MES in applications.

Carbon-Based Composites as Anodes for Microbial Fuel Cells: Recent Advances and Challenges

Owing to the low price, chemical stability and good conductivity, carbon-based materials have been extensively applied as the anode in microbial fuel cells (MFCs). In this review, apart from the charge storage mechanism and anode requirements, the major work focuses on five categories of carbon-based anode materials (traditional carbon, porous carbon, nano-carbon, metal/carbon composite and polymer/carbon composite). The relationship is demonstrated in depth between the physicochemical properties of the anode surface/interface/bulk (porosity, surface area, hydrophilicity, partical size, charge, roughness, etc.) and the bioelectrochemical performances (electron transfer, electrolyte diffusion, capacitance, toxicity, start-up time, current, power density, voltage, etc.). An outlook for future work is also proposed.

Carbon Nanotube/Pt Cathode Nanocomposite Electrode in Microbial Fuel Cells for Wastewater Treatment and Bioenergy Production

In this paper, we reported the fabrication, characterization, and application of carbon nanotube (CNT)-platinum nanocomposite as a novel generation of cathode catalyst in microbial fuel cells (MFCs) for sustainable energy production and wastewater treatment. The efficiency of the carbon nanocomposites was compared by platinum (Pt), which is the most effective and common cathode catalyst. This nanocomposite is utilized to benefit from the catalytic properties of CNTs and reduce the amount of required Pt, as it is an expensive catalyst. The CNT/Pt nanocomposites were synthesized via a chemical reduction technique and the electrodes were characterized by field emission scanning electron microscopy, electronic dispersive X-Ray analysis, and transmission electron microscopy. The nanocomposites were applied as cathode catalysts in the MFC to obtain polarization curve and coulombic efficiency (CE) results. The catalytic properties of electrodes were tested by linear sweep voltammetry. The CNT/Pt at the concentration of 0.3 mg/cm2 had the highest performance in terms of CE (47.16%), internal resistance (551 Ω), COD removal (88.9%), and power generation (143 mW/m2). In contrast, for the electrode with 0.5 mg/L of Pt catalyst, CE, internal resistance, COD removal, and power generation were 19%, 810 Ω, 96%, and 84.1 mW/m2, respectively. So, it has been found that carbon nanocomposite cathode electrodes had better performance for sustainable clean energy production and COD removal by MFC.

Optimization of Process Conditions for Continuous Growth of CNTs on the Surface of Carbon Fibers

Grafting carbon nanotubes (CNTs) is one of the most commonly used methods for modifying carbon fiber surface, during which complex device is usually needed and the growth of CNTs is difficult to control. Herein, we provide an implementable and continuous chemical vapor deposition (CVD) process, by which the novel multiscale reinforcement of carbon nanotube (CNT)-grafted carbon fiber is prepared. After exploring the effects of the moving speed and growth atmosphere on the morphology and mechanical properties of carbon nanotubes/carbon fiber (CNTs/CF) reinforcement, the optimal CVD process conditions are determined. The results show that low moving speeds of carbon fibers passing through the reactor can prolong the growth time of CNTs, increasing the thickness and density of the CNTs layer. When the moving speed is 3 cm/min or 4 cm/min, the surface graphitization degree and tensile strength of CNTs/CF almost simultaneously reach the highest value. It is also found that H2 in the growth atmosphere can inhibit the cracking of C2H2 and has a certain effect on prolonging the life of the catalyst. Meanwhile, the graphitization degree is promoted gradually with the increase in H2 flow rate from 0 to 0.9 L/min, which is beneficial to CNTs/CF tensile properties.

Solid-phase microextraction integrated nanobiosensors for the serial detection of cytoplasmic dopamine in a single living cell

Dopamine participates in many physiological and pathological processes. Dynamic monitoring of dopamine levels in the cytoplasm of a single living cell reflects not only the functional state of dopamine synthesis factors but also the processes of related neurodegenerative diseases. Due to the low content of cytoplasmic dopamine and the difficulty to keep cells alive during the operating process, the detection of cytoplasmic dopamine is still challenging. Herein, a solid-phase microextraction (SPME) technique integrated nanobiosensor was employed to trace and quantify dopamine concentration fluctuations in the cytoplasm of a single living cell. We designed a polypyrrole modified carbon fiber nanoprobe as a bifunctional nanoprobe that can extract cytoplasmic dopamine and then perform electrochemical detection. This bifunctional nanoprobe can detect 10 pmol/L extracted dopamine and detected a 60% decrease of the cytoplasmic dopamine concentration in a single living cell by K⁺ stimulation. This study allowed for the first time serially detecting cytoplasmic dopamine while keeping the target cell alive, which might yield a new method for research on dopamine neurotoxicity and the related drug action mechanisms for neurodegenerative disease.

Enhanced electron transfer on microbial electrosynthesis biocathode by polypyrrole-coated acetogens

Extracellular electron transfer (EET) is a significant pathway to transport electrons between bacteria and electrode in microbial electrosynthesis systems (MESs). To enhance EET in the MES, a high-conductivity polymer, polypyrrole (PPy), was coated on the surface of mixed culture acetogens in situ and the PPy-coated bacteria were inoculated on the cathode of MES. The charge transfer resistance of PPy-coated biocathode was 33%-70% of that with PPy-uncoated. Acetate production rate and Faradic efficiency in PPy-coated biocathodes increased by 3 to 6 times. After 960 h operation, Acetobacterium, Desulfovibrio, and Acinetobacter dominate the community on the coated and uncoated biocathode. Quinone loop and NADH dehydrogenase to ubiquinone were involved in electron transfer pathway of biocathode and stimulated by PPy coating. Low-level expression of C-type cytochromes on biocathode indicated its less important role in inward EET. The study provided useful information for applications of high-conductivity chemicals in microbial electrosynthesis.

Application of advanced anodes in microbial fuel cells for power generation: A review

Microbial fuel cells (MFCs) the most extensively described bioelectrochemical systems (BES), have been made remarkable progress in the past few decades. Although the energy and environment benefits of MFCs have been recognized in bioconversion process, there are still several challenges for practical applications on large-scale, particularly for relatively low power output by high ohmic resistance and long period of start-up time. Anodes serving as an attachment carrier of microorganisms plays a vital role on bioelectricity production and extracellular electron transfer (EET) between the electroactive bacteria (EAB) and solid electrode surface in MFCs. Therefore, there has been a surge of interest in developing advanced anodes to enhance electrode electrical properties of MFCs. In this review, different properties of advanced materials for decorating anode have been comprehensively elucidated regarding to the principle of well-designed electrode, power output and electrochemical properties. In particular, the mechanism of these materials to enhance bioelectricity generation and the synergistic action between the EAB and solid electrode were clarified in detail. Furthermore, development of next generation anode materials and the potential modification methods were also prospected.

Hydrophilic graphene aerogel anodes enhance the performance of microbial electrochemical systems

The hydrophilic three-dimensional (3D) structure of graphene materials was produced with reducing agent-ethylene glycol through hydrothermal reduction. Numerous microorganisms with diverse community structure were established in anode surface, as the hydrophilicity of the graphene anode increased; more populations of Proteobacteria and Firmicutes families were identified in a higher hydrophilic anode. In addition, the start-up time of a microbial fuel cell (MFC) equipped with hydrophilic 3D graphene anode was only 43 h, which is much shorter than traditional 3D graphene-based anode systems. The most hydrophilic anode exhibited the maximal power density of 583.8 W m^-3, 5 times larger than the least hydrophilic one. The content of oxygen in graphene materials improving hydrophilicity would play an important role in enhancing power density. This study proves that hydrophilic 3D graphene materials as the anode can improve MFC performance and start-up time.

Synthesis and electrochemical characterization of a new benzodioxocine-fused poly(N-methylpyrrole) derivative: a joint experimental and DFT study

Synthesis of a new electropolymerizable monomer, XyPMe, regarding the reaction of diethylN-methyl-3,4-dihydroxypyrrole-2,5-dicarboxylate and 1,2-bis(bromomethyl)benzene with concomitant hydrolysis and decarboxylation reactions was accomplished.

Low intensity electric field inactivation of Gram-positive and Gram-negative bacteria via metal-free polymeric composite

The adhesion of pathogenic bacteria in medical implants and surfaces is a health-related problem that requires strong inhibition against bacterial growth and attachment. In this work, we have explored the enhancement in the antibacterial activity of metal free-based composites under external electric field. It affects the oxidation degree of polypyrrole-based electrodes and consequently the antibacterial activity of the material. A conductive layer of carbon nanotubes (graphite) was deposited on porous substrate of polyurethane (sandpaper) and covered by polypyrrole, providing highly conductive electrodes characterized by intrinsic antibacterial activity and reinforced by electro-enhanced effect due to the external electric field. The bacterial inhibition of composites was monitored from counting of viable cells at different voltage/time of treatment and determination of biofilm inhibition on electrodes and reactors. The external voltage on electrodes reduces the threshold time for complete bacterial inactivation of PPy-based composites to values in order of 30 min for Staphylococcus aureus and 60 min for Escherichia coli.