Electrocatalytic sulfathiazole degradation by a novel nickel-foam cathode coated with nitrogen-doped porous carbon

How data on transformation products can support the redesign of sulfonamides towards better biodegradability in the environment

Sulfonamide antibiotics (SUAs) released into the environment can affect environmental und human health, e.g., by accelerating the development and selection of antimicrobial resistant bacteria. Benign by Design (BbD) of SUAs is an effective risk prevention approach. BbD principles aim for fast and complete mineralization or at least deactivation of the SUA after release into the aquatic environment. Main objective was to test if mixtures of transformation products (TPs) generated via photolysis of SUAs can be used as an efficient way to screen for similarly effective but better biodegradable SUA alternatives. Six SUAs were photolyzed (Hg ultraviolet (UV) light), and generated UV-mixtures analysed by high performance liquid chromatography coupled to an UV and tandem mass spectrometry detector. UV-mixtures were screened for antibiotic activity (luminescence bacteria test, LBT, on luminescence and growth inhibition of Aliivibrio Fischeri) and environmental biodegradability (manometric respirometry test, MRT, OECD 301F) using untreated parent SUAs in comparison. Additionally, ready environmental biodegradability of three commercially available hydroxylated sulfanilamide derivatives was investigated. SUA-TPs contributed to acute and chronic bacterial luminescence inhibition by UV-mixtures. LBT's third endpoint, growth inhibition, was not significant for UV-mixtures. However, it cannot be excluded for tested TPs as concentrations were lower than parents' concentrations and inhibition by most parental concentrations tested was also not significant. HPLC analysis of MRT samples revealed that one third of SUA-TPs was reduced during incubation. Three of these TPs, likely OH-SIX, OH-SMX and OH-STZ, were of interest for BbD because the sulfonamide moiety is still present. However, hydroxylated sulfanilamide derivatives, tested to investigate the effect of hydroxylation on biodegradability, were not readily biodegraded. Thus, improving mineralization through hydroxylation as a general rule couldn't be confirmed, and no BbD candidate could be identified. This study fills data gaps on bioactivity and environmental biodegradability of SUAs' TP-mixtures. Findings may support new redesign approaches.

Generation of high-valent iron-oxo porphyrin cation radicals on hemin loaded carbon nanotubes for efficient degradation of sulfathiazole

Hemin has attracted considerable interest as an efficient catalyst recently, however, its direct application is inefficient due to severe molecular aggregation. Immobilizing hemin on various supports is a feasible approach to address this issue. In this work, a CNTs-hemin catalyst was prepared by loading hemin onto multiwalled carbon nanotubes (CNTs) through ball milling. Compared with hemin, CNTs-hemin demonstrates remarkably enhanced performance in the peroxymonosulfate system, with a 650-fold improvement of apparent rate constant, reaching 97.8% degradation of sulfathiazole in 5 min. High-valent iron-oxo porphyrin cation ((Porp)^+•Fe^IV=O) radicals are proposed as the dominant reactive species in the CNTs-hemin/peroxymonosulfate system instead of sulfate radicals (SO₄^•-), hydroxyl radicals (•OH), superoxide radicals (O₂^•-) and singlet oxygen (¹O₂). More in-depth mechanisms reveal that the strong electron transfer between CNTs and hemin promotes the generation of (Porp)^+•Fe^IV=O radicals through a heterolysis pathway. This research enriches the understanding of the catalytic mechanism of supported biomimetic catalysts for PMS activation and provides a perspective on the role of support materials for catalytic activity.

Sulfidised nanoscale zerovalent iron-modified pitaya peel-derived carbon for enrofloxacin degradation and swine wastewater treatment: Combination of electro-Fenton and bio-electro-Fenton process

In this study, a new Fenton system combining electro-Fenton and bio-electro-Fenton (EF-BEF) processes was proposed for ENR degradation and swine wastewater treatment, and pitaya peel-derived carbon modified with sulfidised nanoscale zerovalent iron (SnZVI) was developed as a catalyst for the system. The as-prepared PPC-800 carbon displayed a hierarchical porous structure (693.5 m²/g), abundant oxygen-containing groups, and carbon defects, which endowed it with a good adsorption capacity, high H₂O₂ generation capacity (151.9 ± 10.5 mg/L) during the EF period, and good power production performance (194.3 ± 12.50 mW/m²) during the BEF period. When modified with SnZVI, despite the decrease in the adsorption capacity and power output (102.05 ± 4.05 mW/m²), the SnZVI@PPC-2 exhibited the best ENR removal performance with that of 98.9 ± 0.2% in the EF period and 86.2 ± 5.6% during the BEF period. An increase in the current intensity and air flow rate promoted ENR degradation. Finally, swine wastewater was treated using the SnZVI@PPC-2 EF-BEF system, and 97.9 ± 1.3% of the TOC was removed using the combined system.

Separation and Characterization of Cellulose Fibers from Cannabis Bast Using Foamed Nickel by Cathodic Electro-Fenton Oxidation Strategy

Degumming is the most important link in the textile industry. The main purpose of degumming is to effectively remove non-cellulose substances in plant bast fibers. In this research, we propose an electro-Fenton (EF) system with a nickel-foam (Ni-F) cathode in weak acid pH (EF/Ni-F) to degum cannabis fiber in EF while reducing the content of pollutants in degumming wastewater. FT-IR, XPS, XRD, SEM, and TG were employed to thoroughly understand the reaction characteristics to characterize chemical components, element qualities, the crystallinity, and the morphologies of degummed fibers. Additionally, physical and mechanical properties such as breaking strength, elongation at breaking, residual glue rate, whiteness, and diameter of degummed fibers were measured. Through testing, it was found that the fiber degummed by the EF method had higher breaking strength, lower residual tackiness, and higher whiteness than other methods. The antibacterial test was used to detect the effect of fiber on Staphylococcus aureus before and after degumming. EF could remove more colloidal components from cannabis than other methods, and the mechanical properties were also enhanced. The characteristics of the degummed fiber further confirmed the effectiveness of the new degumming method. Moreover, the antibacterial experiment found that the antibacterial property of the degummed fiber was enhanced. The colloidal components in the degumming wastewater were flocculated and precipitated. The upper liquid of the solution had low chromaticity, low COD value, and weak acid pH value, which can meet the discharge requirements. The above test proves that EF is an effective degumming method that is environmentally friendly, takes less time, and enhances antibacterial performance.

A review of recent advances in electrode materials for emerging bioelectrochemical systems: From biofilm-bearing anodes to specialized cathodes

Bioelectrochemical systems (BES), mainly microbial fuel cells (MEC) and microbial electrolysis cells (MFC), are unique biosystems that use electroactive bacteria (EAB) to produce electrons in the form of electric energy for different applications. BES have attracted increasing attention as a sustainable, low-cost, and neutral-carbon option for energy production, wastewater treatment, and biosynthesis. Complex interactions between EAB and the electrode materials play a crucial role in system performance and scalability. The electron transfer processes from the EAB to the anode surface or from the cathode surface to the EAB have been the object of numerous investigations in BES, and the development of new materials to maximize energy production and overall performance has been a hot topic in the last years. The present review paper discusses the advances on innovative electrode materials for emerging BES, which include MEC coupled to anaerobic digestion (MEC-AD), Microbial Desalination Cells (MDC), plant-MFC (P-MFC), constructed wetlands-MFC (CW-MFC), and microbial electro-Fenton (BEF). Detailed insights on innovative electrode modification strategies to improve the electrode transfer kinetics on each emerging BES are provided. The effect of materials on microbial population is also discussed in this review. Furthermore, the challenges and opportunities for materials scientists and engineers working in BES are presented at the end of this work aiming at scaling up and industrialization of such versatile systems.

Effective electro-Fenton-like process for phenol degradation on cerium oxide hollow spheres encapsulated in porous carbon cathode derived from skimmed cotton

The uniform size cerium dioxide hollow spheres which were prepared by the SiO₂ hard template method were loaded on microporous porous carbon obtained by carbonization derived from skimmed cotton (CSC) for electro-Fenton-like degradation of phenol. The microstructures of CSC/CeO₂ composite materials were characterized utilizing XRD, BET, XPS, SEM, and TEM. The electrochemical performance of the CSC/CeO₂ cathodes was studied through cyclic voltammetry and electrochemical impedance spectroscopy. The prepared CSC has a hollow tubular structure, and cerium dioxide is evenly loaded on the surface of the CSC in the form of uniform-sized hollow spheres. The CSC/CeO₂ materials have a great specific surface area (287.73 m² g^-1) and a uniform poresize. The electrochemical performance analysis demonstrated that the redox ability of the material greatly was improved by loading CeO₂ on the porous carbon surface of the skimmed cotton. The load ratio of cerium dioxide hollow spheres affects the structure and properties of CSC/CeO₂ materials. Ce³⁺ and Ce⁴⁺ were co-existed in CSC/CeO₂, which promoted the generation of H₂O₂ and ^.OH, and improved the catalytic activity of composite materials. The degradation efficiency of phenol reached 97.6% in 120 min, and the CSC/CeO₂ cathode manifested excellent stability after being experimented 20 times. CSC/CeO₂ composite material has great practical value in the treatment of phenolic wastewater and has promise for further application.

Carbonaceous cathode materials for electro-Fenton technology: Mechanism, kinetics, recent advances, opportunities and challenges

Electro-Fenton (EF) technique has gained significant attention in recent years owing to its high efficiency and environmental compatibility for the degradation of organic pollutants and contaminants of emerging concern (CECs). The efficiency of an EF reaction relies primarily on the formation of hydrogen peroxide (H₂O₂) via 2e^─ oxygen reduction reaction (ORR) and the generation of hydroxyl radicals (^●OH). This could be achieved through an efficient cathode material which operates over a wide pH range (pH 3-9). Herein, the current progresses on the advancements of carbonaceous cathode materials for EF reactions are comprehensively reviewed. The insights of various materials such as, activated carbon fibres (ACFs), carbon/graphite felt (CF/GF), carbon nanotubes (CNTs), graphene, carbon aerogels (CAs), ordered mesoporous carbon (OMCs), etc. are discussed inclusively. Transition metals and hetero atoms were used as dopants to enhance the efficiency of homogeneous and heterogeneous EF reactions. Iron-functionalized cathodes widened the working pH window (pH 1-9) and limited the energy consumption. The mechanism, reactor configuration, and kinetic models, are explained. Techno economic analysis of the EF reaction revealed that the anode and the raw materials contributed significantly to the overall cost. It is concluded that most reactions follow pseudo-first order kinetics and rotating cathodes provide the best H₂O₂ production efficiency in lab scale. The challenges, future prospects and commercialization of EF reaction for wastewater treatment are also discussed.

Biochar cathode: Reinforcing electro-Fenton pathway against four-electron reduction by controlled carbonization and surface chemistry

Porous biochars have attracted tremendous interests in electrochemical applications. In this study, a family of biochars were prepared from cellulose subject to different carbonization temperatures ranging from 400 to 700 °C, and the biochars were in-situ activated by a molten salt (ZnCl₂) to construct a hierarchically porous architecture. The activated porous biochars (ZnBC) were used as a carbocatalyst for electro-Fenton (EF) oxidation of organic contaminants. Results showed that high-temperature carbonization improved the activity of biochar for four-electron oxygen reduction reaction (ORR) due to the rich carbon defects, while the mild-temperature treatment regulated the species and distribution of oxygen functional groups to increase the production of hydrogen peroxide (H₂O₂) via a selective two-electron ORR pathway. ZnBC-550 was the best cathode material with a high ORR activity without compromise in H₂O₂ selectivity; a high production rate of H₂O₂ (796.1 mg/g/h) was attained at -0.25 V vs RHE at pH of 1. Furthermore, Fe(II) addition induced an electro-Fenton system to attain fast decomposition of various organic pollutants at -0.25 V vs RHE (reversible hydrogen electrode) and pH of 3 with a satisfactory mineralization efficiency toward phenolic pollutants. The EF system maintains its excellent stability for 10 cycles. Hydroxyl radicals were identified as the dominant reactive oxygen species based on in situ electron paramagnetic resonance (EPR) analysis and radical quenching tests. This study gains new insights into electrocatalytic H₂O₂ production over porous biochars and provides a low-cost, robust and high-performance electro-Fenton cathode for wastewater purification.

Unconventional electro-Fenton process operating at a wide pH range with Ni foam cathode and tripolyphosphate electrolyte

We propose an unconventional electro-Fenton (EF) system with a nickel-foam (Ni-F) cathode and tripolyphosphate (3-PP) electrolyte at near-neutral pH (EF/Ni-F-3-PP) to overcome pH restrictions in EF while preventing Ni-F corrosion. Response surface modelling was used to optimize the main operating parameters with a model prediction analysis (R² = 0.99): pH = 5.8, Fe²⁺ = 3.0 mM and applied current = 349.6 mA. Among the three variables, the pH exerted the highest influence on the process. Under optimal conditions, 100 % of phenol removal was achieved in 25 min with a pseudo-first-order apparent rate constant (k_app) of 0.2 min^-1, 3.2-fold higher than the k_app of EF/Ni-F with SO₄^2- electrolyte at pH 3. A mineralization yield of 81.5 % was attained after 2 h; furthermore, it was found that 3-PP enhanced H₂O₂ accumulation by preventing bulk H₂O₂ decomposition. Finally, toxicity evaluation revealed the formation of toxic by-products at the early stages of treatment, which were totally depleted after 2 h, demonstrating the detoxifying capacity of the system. In conclusion, this study shows for the first time the potential of Ni-F as a cathode for EF under near-neutral conditions, rendered possible by the 3PP electrolyte. Under these conditions, the Ni-F corrosion issue could be alleviated.

Nitrogen-doped porous carbon encapsulating iron nanoparticles for enhanced sulfathiazole removal via peroxymonosulfate activation

Developing novel catalyst with both high efficiency and stability presents an enticing prospect for peroxymonosulfate (PMS) activation. In this paper, nitrogen-doped porous carbon encapsulating iron nanoparticles (CN-Fe) was fabricated by a facile carbothermal reduction process using polyaniline (PANI) and α-Fe₂O₃ as the precursors. The stubborn antibiotics, sulfathiazole (STZ), was employed as a target pollutant, demonstrating that CN-Fe coupled with PMS could achieve 96% removal efficiency and even 57% mineralization rate of STZ within 40 min. More importantly, the rate constant of CN-Fe was calculated to be 0.07665 min^-1, which was 6 times higher than that of the commercial α-Fe₂O₃ catalyst. Furthermore, CN-Fe also presented a favorable catalytic performance for removing other organic pollutants including phenolic compounds and organic dyes. Interestingly, the catalytic activity of the used CN-Fe catalyst could be regenerated after thermal treatment (600 °C) and the as-synthesized CN-Fe catalyst exhibited excellent long-term stability with almost no loss of activity after storage for three months. The catalytic mechanism in the CN-Fe/PMS system was elucidated by electron paramagnetic resonance (EPR), linear sweep voltammetry (LSV), radical and electron trapping tests, which confirmed that sulfate radicals (SO₄^-), hydroxyl radicals (OH), superoxide radicals (O₂^-) and singlet oxygen (¹O₂) were generated in the oxidation process with the assistance of electron transfer between PMS and catalyst. To our knowledge, this was the first attempt for the application of PANI-derived CN-Fe hybrid materials as PMS activators and the findings would provide a simple and promising strategy to fabricate highly efficient and environment-benign catalysts for wastewater remediation.

Degradation of sulfathiazole by electro-Fenton using a nitrogen-doped cathode and a BDD anode: Insight into the H2O2 generation and radical oxidation

In this work, nitrogen-doped cathodes for high H₂O₂ production and sulfathiazole (STZ) degradation in electro-Fenton (EF) systems were prepared by the carbonization of three carbon/nitrogen-enriched precursors. Among the cathodes elaborated from different precursors, the one using 1h-1,2,4-triazole-3,5-diamine as the precursor showed the best oxygen reduction reaction (ORR) ability with the normalized H₂O₂ accumulation of 9.49 ± 0.03 mg L^-1 h^-1 cm^-2 compared to the other two N-containing cathodes. The enhanced H₂O₂ accumulation was attributed to the high electroactive surface area and pyrrolic N (60.45%) content. Regarding reactive oxygen species in the absence of Fe²⁺, aside from the H₂O₂, O₂^-and ¹O₂ were identified using spectroscopic techniques and chemical probes. As a result, a degradation and mineralization efficiency of 98.25 ± 0.14% and 70.57 ± 0.27% of STZ were attained in the 180-min treatment, mainly coming from the homogeneous OH from classical Fenton, anodic OH on BDD anode and direct/indirect oxidation of O₂^-and ¹O₂. In addition, the plausible degradation pathway of STZ was proposed based on the density functional theory (DFT) combined with experimental data derived by ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS). The frontier orbital theory and Fukui function theoretically suggested the vulnerable sites of STZ for different active species including OH, O₂^- and ¹O₂. This study provides a new strategy for improving the ORR process and analyzing the generation and conversion of reactive oxygen species in the EF process.