LED visible-light driven label-free photoelectrochemical immunosensor based on WO3/Au/CdS photocatalyst for the sensitive detection of carcinoembryonic antigen

Signal amplification strategies in photoelectrochemical sensing of carcinoembryonic antigen

Early detection of cancer markers is critical for cancer diagnosis and cancer therapy since these markers may indicate cancer risk, incidence, and disease prognosis. Carcinoembryonic antigen (CEA) is a type of non-specific and broad-spectrum cancer biomarker commonly utilized for early cancer diagnosis. Moreover, it serves as an essential tool to assess the efficacy of cancer treatment and monitor tumor recurrence as well as metastasis, thus garnering significant attention for precise and sensitive CEA detection. In recent years, photoelectrochemical (PEC) techniques have emerged as prominent methods in CEA detection due to the advantages of PEC, such as simple equipment requirements, cost-effectiveness, high sensitivity, low interference from background signals, and easy of instrument miniaturization. Different signal amplification methods have been reported in PEC sensors for CEA analysis. Based on these, this article reviews PEC sensors based on various signal amplification strategies for detection of CEA during the last five years. The advantages and drawbacks of these sensors were discussed, as well as future challenges.

A signal-on photoelectrochemical aptasensor based on WO3/CdS heterojunction for the ultrasensitive detection of kanamycin

In this study, a signal-on photoelectrochemical (PEC) aptasensor for the ultrasensitive determination of kanamycin (KANA) was constructed using WO3/CdS heterojunction as photoactive material. Firstly, WO3/CdS heterojunction with excellent photoelectric response was successfully prepared by simple co-precipitation method, resulting in a strong and stable initial photocurrent. In addition, amino modified aptamers were immobilized on the electrode surface by glutaraldehyde as biological recognition components. In the presence of the target KANA, it is specifically recognized and captured by the aptamers. More importantly, KANA can act as a signal amplifier to enhance the photocurrent due to the oxidation of KANA by photogenerated holes. Therefore, a signal-on PEC aptasensor based on WO3/CdS heterojunction with high selectivity was obtained for the detection of KANA. Under optimized experimental conditions, the PEC aptasensor demonstrated a wide linear range of 10 pM to 400 nM, with a detection limit of 6.77 pM. Meanwhile, the designed PEC aptasensor had been successfully utilized for the analytical examination of milk, fish, serum, and water samples.

Electrochemical and Photoelectrochemical Immunosensors for the Detection of Ovarian Cancer Biomarkers

Photoelectrochemical (PEC) sensing is an emerging technological innovation for monitoring small substances/molecules in biological or non-biological systems. In particular, there has been a surge of interest in developing PEC devices for determining molecules of clinical significance. This is especially the case for molecules that are markers for serious and deadly medical conditions. The increased interest in PEC sensors to monitor such biomarkers can be attributed to the many apparent advantages of the PEC system, including an enhanced measurable signal, high potential for miniaturization, rapid testing, and low cost, amongst others. The growing number of published research reports on the subject calls for a comprehensive review of the various findings. This article is a review of studies on electrochemical (EC) and PEC sensors for ovarian cancer biomarkers in the last seven years (2016-2022). EC sensors were included because PEC is an improved EC; and a comparison of both systems has, expectedly, been carried out in many studies. Specific attention was given to the different markers of ovarian cancer and the EC/PEC sensing platforms developed for their detection/quantification. Relevant articles were sourced from the following databases: Scopus, PubMed Central, Web of Science, Science Direct, Academic Search Complete, EBSCO, CORE, Directory of open Access Journals (DOAJ), Public Library of Science (PLOS), BioMed Central (BMC), Semantic Scholar, Research Gate, SciELO, Wiley Online Library, Elsevier and SpringerLink.

Sensitive and Specific Detection of Carcinoembryonic Antigens Using Toroidal Metamaterial Biosensors Integrated with Functionalized Gold Nanoparticles

Carcinoembryonic antigen (CEA) is a biomarker that is highly expressed in cancer patients. Label-free, highly sensitive, and specific detection of CEA biomarkers can therefore greatly aid in the early detection and screening of cancer. This study presents a toroidal metamaterial biosensor integrated with functionalized gold nanoparticles (AuNPs) that demonstrated highly sensitive and specific detection of CEA using terahertz (THz) time-domain spectroscopy. In the biosensor, a closed-loop magnetic field formed an electrical confinement, resulting in a high sensitivity (287.8 GHz/RIU) and an ultrahigh quality factor (15.04). In addition, the integrated AuNPs with high refractive indices significantly enhanced the sensing performance of the biosensor. To explore the quantitative and qualitative detection of CEA, CEA biomarkers with various concentrations and four types of proteins were measured by the designed biosensor, achieving a limit of detection of 0.17 ng and high specificity. Even more significant, the proposed AuNP-integrated THz toroidal metamaterial biosensor demonstrates exceptional potential for use in technologies for cancer diagnosis and monitoring.

2D carbon materials based photoelectrochemical biosensors for detection of cancer antigens

Cancer is a leading cause of death globally and early diagnosis is of paramount importance for identifying appropriate treatment pathways to improve cancer patient survival. However, conventional methods for cancer detection such as biopsy, CT scan, magnetic resonance imaging, endoscopy, X-ray and ultrasound are limited and not efficient for early cancer detection. Advancements in molecular technology have enabled the identification of various cancer biomarkers for diagnosis and prognosis of the deadly disease. The detection of these biomarkers can be done by biosensors. Biosensors are less time consuming compared to conventional methods and has the potential to detect cancer at an earlier stage. Compared to conventional biosensors, photoelectrochemical (PEC) biosensors have improved selectivity and sensitivity and is a suitable tool for detecting cancer agents. Recently, 2D carbon materials have gained interest as a PEC sensing platform due to their high surface area and ease of surface modifications for improved electrical transfer and attachment of biorecognition elements. This review will focus on the development of 2D carbon nanomaterials as electrode platform in PEC biosensors for the detection of cancer biomarkers. The working principles, biorecognition strategies and key parameters that influence the performance of the biosensors will be critically discussed. In addition, the potential application of PEC biosensor in clinical settings will also be explored, providing insights into the future perspective and challenges of exploiting PEC biosensors for cancer diagnosis.

Tungsten-based Nanomaterials in the Biomedical Field: A Bibliometric Analysis of Research Progress and Prospects

Tungsten-based nanomaterials (TNMs) with diverse nanostructures and unique physicochemical properties have been widely applied in the biomedical field. Although various reviews have described the application of TNMs in specific biomedical fields, there are still no comprehensive studies that summarize and analyze research trends of the field as a whole. To identify and further promote the development of biomedical TNMs, a bibliometric analysis method is used to analyze all relevant literature on this topic. First, general bibliometric distributions of the dataset by year, country, institute, referenced source, and research hotspots are recognized. Next, a comprehensive review of the subjectively recognized research hotspots in various biomedical fields, including biological sensing, anticancer treatments, antibacterials, and toxicity evaluation, is provided. Finally, the prospects and challenges of TNMs are discussed to provide a new perspective for further promoting their development in biomedical research.

Cuprous oxide coated silver/graphitic carbon nitride/cadmium sulfide nanocomposite heterostructure: Specific recognition of carcinoembryonic antigen through sandwich-type mechanism

The development of the effective diagnostic method for the determination of cancer biomarkers is one of the most promising strategies for early clinical diagnosis of cancer. Here, based on the preparation of heterogeneous cuprous oxide coated silver (Ag@Cu₂O) nanocomposites/graphitic carbon nitride (g-C₃N₄)/cadmium sulfide (CdS) nanoarrays structure, a highly sensitive photoelectrochemical (PEC) biosensor for the examination of carcinoembryonic antigen (CEA) has been constructed successfully. The combination of photoactive semiconductor materials g-C₃N₄ and CdS increases the electron transfer rate between them and enhances their photocurrent response, thus greatly increasing the concentration detection range. At the same time, the specific recognition between antigen and antibody is used to form a sandwich structure secondary antibody (Ab₂)/CEA/antibody (Ab₁). And because Ag@Cu₂O has the function of absorbing light and consuming electron donor. Therefore, the successful measurement of CEA was achieved by labeling Ag@Cu₂O on Ab₂ and finally immobilizing it on the sensor to correlate the current reduction with the CEA concentration. The sandwich PEC biosensor proposed by this signal amplification strategy under optimal conditions has good analytical performance for CEA, with a wide linear detection range (from 10^-5 to 1 ng/mL) and a low detection limit of 0.0011 pg/mL. The PEC biosensor constructed by this method showed high sensitivity, excellent anti-interference ability, favourable repeatability, and good stability.

Photoelectrochemical sandwich immunoassay of CYFRA21-1 based on In2O3/WO3 type-II heterojunction and CdS quantum dots-polydopamine nanospheres labeling

Using an In₂O₃/WO₃ type-II heterojunction modified fluorine-doped tin oxide (FTO) electrode as the photoanode and CdS quantum dots (QDs)-polydopamine nanospheres (PDA NSs) as the secondary antibody (Ab₂) label, the photoelectrochemistry (PEC) sandwich immunosensing of the lung cancer marker CYFRA21-1 was studied. WO₃ nanoplates were prepared by a hydrothermal method, In₂O₃ nanoporous spheres were prepared by a hydrothermal method followed by calcination, and the In₂O₃/WO₃ type-II heterojunction with high PEC activity was prepared by ultrasonic mixing and cast-coating. PDA NSs with a high surface area can be loaded with abundant Ab₂ molecules and many CdS QDs with an energy level well matched with the heterojunction, so the photocurrent signal can be amplified by the formation of a sandwich immunostructure. Through the simulation experiments of photoelectrode-modified chitosan films of varying thickness, the effective transport distance of photogenerated charges is preliminarily discussed. Under the optimized conditions, the photocurrent was linear with the common logarithm of CYFRA21-1 concentration from 100 fg mL^-1 to 50 ng mL^-1, with a limit of detection of 56 fg mL^-1 (S/N = 3). The immunoassay of CYFRA21-1 in human serum samples gave satisfactory recovery results.

Vertically Aligned Nanorods Fe2TiO5 and Coupling of NiMoO4/CoMoO4 as A Hole-Transfer Cocatalyst for Enhancing Photoelectrochemical Water Oxidation Performance

Fe2TiO5, a promising photoanode material for photoelectrochemical (PEC) splitting water, was limited by its poor conductivity and short carrier diffusion length. Herein, a novel Fe2TiO5 nanorods with the new cocatalyst...

Electrochemistry/Photoelectrochemistry-Based Immunosensing and Aptasensing of Carcinoembryonic Antigen

Recently, electrochemistry- and photoelectrochemistry-based biosensors have been regarded as powerful tools for trace monitoring of carcinoembryonic antigen (CEA) due to the fact of their intrinsic advantages (e.g., high sensitivity, excellent selectivity, small background, and low cost), which play an important role in early cancer screening and diagnosis and benefit people's increasing demands for medical and health services. Thus, this mini-review will introduce the current trends in electrochemical and photoelectrochemical biosensors for CEA assay and classify them into two main categories according to the interactions between target and biorecognition elements: immunosensors and aptasensors. Some recent illustrative examples are summarized for interested readers, accompanied by simple descriptions of the related signaling strategies, advanced materials, and detection modes. Finally, the development prospects and challenges of future electrochemical and photoelectrochemical biosensors are considered.

A sandwich-type ECL immunosensor for the sensitive determination of CEA content based on red emission carbon quantum dots as luminophores

A novel electrochemiluminescent immunosensor was constructed based on the quenching effect between red emission carbon quantum dots and aminated graphene.

Novel Bi2+xWO6 p-n Homojunction Nanostructure: Preparation, Characterization, and Application for a Self-Powered Cathodic Photoelectrochemical Immunosensor

Synthesizing novel cathodic photoactive materials with high photoelectrochemical (PEC) performance is urgently important for the development of photocathodic sensors. Herein, a novel photocathode material, Bi self-doped Bi₂WO₆ (i.e., Bi_2+xWO₆) p-n homojunction, is prepared via a simple ethylene glycol-assisted solvothermal reduction for the first time. Compared with pristine Bi₂WO₆, Bi_2+xWO₆ possesses a narrower band gap and higher light harvesting ability. Among the synthesized materials, Bi_2.1WO₆ exhibits the highest photocurrent response, which is 23 times that of pure Bi₂WO₆ because of the synergistic effect of doped Bi and the p-n homojunction. The open circuit potential, "V-shaped" Mott-Schottky plot, linear sweep voltammetry curve, and transient photocurrent demonstrate the p-n homojunction characteristics of the material well. By using the Bi_2+xWO₆ p-n homojunction as the photocathode for sensing and the plasmonic WO₃/Au composite as the photoanode for signal amplification, a new self-powered membraneless PEC immunosensor is established for a highly sensitive detection of human epididymal protein 4. This study offers a new idea for designing novel photocatalysts with satisfactory performance, and the Bi_2+xWO₆ p-n homojunction is expected to act as a promising PEC platform for developing various self-powered biosensors.

CdS Quantum-Dots-Decorated V2O5 Nanosheets as Chemically Etchable Active Materials for Sensitive Photoelectrochemical Immunoassay of Carcinoembryonic Antigen

We report here CdS quantum-dots (QDs)-decorated V₂O₅ nanosheets as high-performance and chemically etchable photoelectric active materials for constructing a photoelectrochemical (PEC) immunoassay platform. CdS QDs-decorated V₂O₅ nanosheets as new photoelectric materials can show superior photocurrent to V₂O₅ nanosheets and CdS QDs under visible-light irradiation because of the promoted photogenerated electron-hole separation and the increased visible-light absorption. V₂O₅ nanosheets can be etched by ascorbic acid (AA) because of the reduction of V₂O₅ to V⁴⁺, and the photocurrent of CdS/V₂O₅-nanocomposite-modified indium tin oxide electrode decreases significantly after being etched by AA. Inspired by this phenomenon, a PEC immunoassay platform is constructed for carcinoembryonic antigen (CEA) detection by using CdS/V₂O₅ nanocomposite as the photoelectric material and AA-encapsulated liposome immunonanocapsules as labels. The linear detection range for detecting CEA is from 0.5 pg mL^-1 to 1 ng mL^-1, with a limit of detection of 0.1 pg mL^-1. The proposed method also shows good selectivity, excellent reproducibility, and satisfactory recovery in detection of CEA in human serum samples. We believe that this work will lay the foundation for the future development of V₂O₅-based materials for PEC analysis, and also provide a reasonable design and implementation for the development of PEC immunoassay.

Superparamagnetic Nanostructures for Split-Type and Competitive-Mode Photoelectrochemical Aptasensing

Photoelectrochemical sensing has developed rapidly in the past decade because of its inherent advantages of economic devices and low background noise. However, traditional assembly of photoelectric beacons, probes, and targets on the ITO electrode solid-liquid interface inevitably leads to time-consuming, limited selectivity, poor stability, and nonreproducibility. To overcome these drawbacks, in this work, a unique split-type PEC aptasensor for carcinoembryonic antigen (CEA) was developed in virtue of the sandwich-like structure comprised of magnetic-optical Fe₃O₄@SiO₂@CdS-DNA₁, CEA aptamer, and signal element SiO₂-Au-DNA₂. The sandwich-like structure is easily formed in the liquid phase and can be triggered by competition from low-abundance CEA, resulting in dissociation. By further photocurrent measurement in pure phosphate buffer saline (PBS), coexisting species can be effectively removed from the modified electrode, improving selectivity, stability, and repeatability. These advantages benefit from the preparation of uniform and monodispersed Fe₃O₄@SiO₂@CdS and SiO₂-Au particles, DNAs assembly, and an elegant design. Additionally, the as-designed signal-on PEC aptasensor is highly sensitive, short time-consuming, and economical, enabling the detection of CEA in serum specimens. It not only provides an alternative to CEA immunosensors, but also paves the way for high-performance PEC aptasensors.

An ultrasensitive immunosensor based on manganese dioxide-graphene nanoplatelets and core shell Fe3O4@Au nanoparticles for label-free detection of carcinoembryonic antigen

A novel electrochemical immunosensor was developed for label-free detection of carcinoembryonic antigen (CEA) as a cancer biomarker. The designed immunosensor was based on CEA antibody (anti-CEA) anchored with core shell Fe₃O₄@Au nanoparticles which were immobilized on a screen-printed carbon electrode modified with manganese dioxide decorating on graphene nanoplatelets (SPCE/GNP-MnO₂/Fe₃O₄@Au-antiCEA). The SPCE was placed onto a home-made electrode holder for easy handling. The approach was based on direct binding of CEA to a fixed amount of anti-CEA on the modified electrode for the specific detection using linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) monitored in a solution containing 5 mM [Fe(CN)₆^3-/4-] prepared in 0.1 M phosphate buffer at pH 7.4. The difference in signal response owing to the redox reaction of [Fe(CN)₆]^3-/4- before and after interaction with CEA was regarded as the immunosensor response corresponding directly to the CEA concentration. Under optimized conditions, the linear range of 0.001-100 ng/mL, and the detection limits of 0.10 pg/mL (LSV) and 0.30 pg/mL (EIS) were evaluated. The applicability of the immunosensor was verified by well-corresponding determination of CEA in diluted human serum samples by electrochemiluminescence (ECL) immunoassay. Therefore, the proposed immunosensor could be suitable enough for a real sample analysis of CEA.

Photoelectrochemical biosensor for CEA detection based on SnS2-GR with multiple quenching effects of Au@CuS-GR

A novel signal on-off type photoelectrochemical (PEC) biosensing system was designed for sensitive detection of carcinoembryonic antigen (CEA) based on tin disulfide nanosheets loaded on reduced graphene cxide (SnS₂-GR) as the photoactive material and gold nanoparticles coated on reduced graphene oxide-functionalized copper sulfide (Au@CuS-GR) for signal amplification. It's the first time for SnS₂-GR was exploited as a sensing matrix. Here, the photocurrent signals of SnS₂ were amplified attributed to the sensitization effect of graphene. As signal amplifier, Au@CuS-GR could quench the photocurrents of SnS₂-GR not only through the p-n type semiconductor quenching effect as well as the steric hindrance effect, but also as peroxidase mimetics to catalyze the oxidation of 4-Chloro-1-naphthol (4-CN) to produce insoluble product on the electrode surface. Based on the multiple signal amplification ability of Au@CuS-GR, CEA was detected sensitively with a linear range from 0.1 pg mL^-1 to 10 ng mL^-1 and limit of detection down to 59.9 fg mL^-1 (S/N = 3). Meanwhile, the PEC biosensor displayed excellent performance in the assay of human serum sample, showing good application prospects for various target analysis.