Hybrid enzymatic and organic catalyst cascade for enhanced complete oxidation of ethanol in an electrochemical micro-reactor device

Surfactant-Free Formate/O2 Biofuel Cell with Electropolymerized Phenothiazine Derivative-Modified Enzymatic Bioanode

A formate (HCOO-) bioanode was developed by utilizing a phenothiazine-based electropolymerized layer deposited on sucrose-derived carbon. The electrode modified with NAD-dependent formate dehydrogenase and the electropolymerized layer synergistically catalyzed the oxidation of the coenzyme (NADH) and fuel (HCOO-) to achieve efficient electron transfer. Further, the replacement of carbon nanotubes with water-dispersible sucrose-derived carbon used as the electrode base allowed the fabrication of a surfactant-free bioanode delivering a maximum current density of 1.96 mA cm-2 in the fuel solution. Finally, a separator- and surfactant-free HCOO-/O2 biofuel cell featuring the above bioanode and a gas-diffusion biocathode modified with bilirubin oxidase and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) was fabricated, delivering a maximum power density of 70 μW cm-2 (at 0.24 V) and an open-circuit voltage of 0.59 V. Thus, this study demonstrates the potential of formic acid as a fuel and possibilities for the application of carbon materials in bioanodes.

Carbon Nanotube PtSn Nanoparticles for Enhanced Complete Biocatalytic Oxidation of Ethylene Glycol in Biofuel Cells

We report a hybrid catalytic system containing metallic PtSn nanoparticles deposited on multiwalled carbon nanotubes (Pt₆₅Sn₃₅/MWCNTs), prepared by the microwave-assisted method, coupled to the enzyme oxalate oxidase (OxOx) for complete ethylene glycol (EG) electrooxidation. Pt₆₅Sn₃₅/MWCNTs, without OxOx, showed good electrochemical activity toward EG oxidation and all the byproducts. Pt₆₅Sn₃₅/MWCNTs cleaved the glyoxilic acid C-C bond, producing CO₂ and formic acid, which was further oxidized at the electrode. Concerning EG oxidation, the catalytic activity of the hybrid system (Pt₆₅Sn₃₅/MWCNTs+OxOx) was twice the catalytic activity of Pt₆₅Sn₃₅/MWCNTs. Long-term electrolysis revealed that Pt₆₅Sn₃₅/MWCNTs+OxOx was much more active for EG oxidation than Pt₆₅Sn₃₅/MWCNTs: the charge increased by 65%. The chromatographic results proved that Pt₆₅Sn₃₅/MWCNTs+OxOx collected all of the 10 electrons per molecule of the fuel and was able to catalyze EG oxidation to CO₂ due to the associative oxidation between the metallic nanoparticles and the enzymatic pathway. Overall, Pt₆₅Sn₃₅/MWCNTs+OxOx proved to be a promising system to enhance the development of enzymatic biofuel cells for further application in the bioelectrochemistry field.

Cascaded Biocatalysis and Bioelectrocatalysis: Overview and Recent Advances

Enzyme cascades are plentiful in nature, but they also have potential in artificial applications due to the possibility of using the target substrate in biofuel cells, electrosynthesis, and biosensors. Cascade reactions from enzymes or hybrid bioorganic catalyst systems exhibit extended substrate range, reaction depth, and increased overall performance. This review addresses the strategies of cascade biocatalysis and bioelectrocatalysis for ( a) CO2 fixation, ( b) high value-added product formation, ( c) sustainable energy sources via deep oxidation, and ( d) cascaded electrochemical enzymatic biosensors. These recent updates in the field provide fundamental concepts, designs of artificial electrocatalytic oxidation-reduction pathways (using a flexible setup involving organic catalysts and engineered enzymes), and advances in hybrid cascaded sensors for sensitive analyte detection.

Ethanol Biofuel Cells: Hybrid Catalytic Cascades as a Tool for Biosensor Devices

Biofuel cells use chemical reactions and biological catalysts (enzymes or microorganisms) to produce electrical energy, providing clean and renewable energy. Enzymatic biofuel cells (EBFCs) have promising characteristics and potential applications as an alternative energy source for low-power electronic devices. Over the last decade, researchers have focused on enhancing the electrocatalytic activity of biosystems and on increasing energy generation and electronic conductivity. Self-powered biosensors can use EBFCs while eliminating the need for an external power source. This review details improvements in EBFC and catalyst arrangements that will help to achieve complete substrate oxidation and to increase the number of collected electrons. It also describes how analytical techniques can be employed to follow the intermediates between the enzymes within the enzymatic cascade. We aim to demonstrate how a high-performance self-powered sensor design based on EBFCs developed for ethanol detection can be adapted and implemented in power devices for biosensing applications.

One-step synthesis of Ni(OH)2/MWCNT nanocomposites for constructing a nonenzymatic hydroquinone/O2 fuel cell

In this work, a H-type hydroquinone/O₂ fuel cell was assembled and shows high energy density in neutral phosphate buffer solution at moderate temperature. The anodic material, Ni(OH)₂/MWCNTs, was synthesized by a one-step hydrothermal synthesis method to oxidize hydroquinone. The cathode material, Pt/MWCNTs, was obtained by an electrodeposition method, and shows great oxygen reduction reaction (ORR) activity. The properties and the morphology of Ni(OH)₂/MWCNT nanocomposites were characterized by TEM, XPS, EDS-mapping and electrochemical methods, like cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results show that Ni(OH)₂/MWCNTs can effectively oxidize hydroquinone and play a dominant role in enhancing the fuel cell performance. The nonenzymatic fuel cell possesses a high power density of 0.24 mW cm^-2 at a cell potential of 0.49 V.