Simultaneous voltammetric detection of six biomolecules using a nanocomposite of titanium dioxide nanorods with multi-walled carbon nanotubes

Ti3C2Tx Coated with TiO2 Nanosheets for the Simultaneous Detection of Ascorbic Acid, Dopamine and Uric Acid

Two-dimensional MXenes have become an important material for electrochemical sensing of biomolecules due to their excellent electric properties, large surface area and hydrophilicity. However, the simultaneous detection of multiple biomolecules using MXene-based electrodes is still a challenge. Here, a simple solvothermal process was used to synthesis the Ti3C2Tx coated with TiO2 nanosheets (Ti3C2Tx@TiO2 NSs). The surface modification of TiO2 NSs on Ti3C2Tx can effectively reduce the self-accumulation of Ti3C2Tx and improve stability. Glassy carbon electrode was modified by Ti3C2Tx@TiO2 NSs (Ti3C2Tx@TiO2 NSs/GCE) and was able simultaneously to detect dopamine (DA), ascorbic acid (AA) and uric acid (UA). Under concentrations ranging from 200 to 1000 μM, 40 to 300 μM and 50 to 400 μM, the limit of detection (LOD) is 2.91 μM, 0.19 μM and 0.25 μM for AA, DA and UA, respectively. Furthermore, Ti3C2Tx@TiO2 NSs/GCE demonstrated remarkable stability and reliable reproducibility for the detection of AA/DA/UA.

Common Transition Metal Oxide Nanomaterials in Electrochemical Sensors for the Diagnosis of Monoamine Neurotransmitter‐Related Disorders

Monoamine neurotransmitters are essential for learning, mental alertness, emotions, and blood flow, among other functions. Fatal neurological disorders that signal the imbalance of these biomolecules in the human system include Parkinson's disease, myocardial infarction, Alzheimer's disease, hypoglycemia, Schizophrenia, and a host of other ailments. The diagnosis of these monoamine neurotransmitter‐related conditions revolves around the development of analytical tools with high sensitivity for the four major monoamine neurotransmitters namely dopamine, epinephrine, norepinephrine, and serotonin. The application of electrochemical sensors made from notable metal oxide nanoparticles or composites containing the metal oxide nanoparticles for the detection of these monoamine neurotransmitters was discussed herein. More importantly, the feasibility of the application of the ZnO, CuO, and TiO2 nanoparticle‐based electrochemical sensors for a comprehensive diagnosis of monoamine neurotransmitter‐related conditions was critically investigated in this review.

Alkaline liquid-derived NaxTi11.5MoVOx/C-40 material with controlled electron transfer rate for sensitive electrochemical detection of dopamine

The neurotransmitter dopamine (DA) is associated with many physiological and pathological processes, so the importance of low detection limits and high sensitivity analysis cannot be overstated, especially for early disease detection. Here, 2 M NaOH aqueous solution is used to precipitate metal ions in an ethanol solution containing carbon black (CB), and then nanocomposite catalysts (NaxTi11.5MoVOx/C-40 (40 denoted as 40 mg CB)) were obtained by calcining the precipitation. When used for DA detection, NaxVOx acts as the main active site for electrochemical oxidation of DA and NaxTi11.5MoOx plays a role in facilitating the binding of DA to the active site and stabilizing the active site. The NaxTi11.5MoVOx/C-40 electrochemical biosensor has a limit of detection (LOD) of 0.003 μM with a linear range of 0.005-51.665 μM for DA. This sensor can be used to sensitively identify the concentration of DA in human blood and urine. Catalysts containing varying amounts of CB exhibit diverse electron transfer rates, and surprisingly, we found that the appropriate electron transfer rate is optimal for the detection of low concentrations of DA. Because the performance of the electrochemical biosensors is affected by both the activity of the catalysts and the accuracy of the electrochemical testing instrumentation. To better explain this phenomenon, we propose the concept of resolution (Rn) and present the formula to derive it, offering a new approach to evaluating the performance of electrochemical biosensors.

Microfluidic flow injection analysis system for the electrochemical detection of dopamine using diazonium-grafted copper nanoparticles on multi-walled carbon nanotube-modified surfaces

In this proof-of-concept study, a microfluidic flow injection analysis (FIA) system was developed using multi-walled carbon nanotube-modified screen-printed carbon electrodes (CNTSPEs) that were modified with copper nanoparticles (CuNPs) following the electrodeposition of the diazonium salt of 4-aminothiophenol to form 4-thiophenol-conjugated CuNPs (CuNPs-CNTSPE). Transmission electron microscopy (TEM), atomic force microscopy (AFM), and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) were used to characterize the size of CuNPs, morphology and elemental analysis of CuNPs-CNTSPE, respectively. Using electrochemical impedance spectroscopy (EIS), the charge-transfer resistance (Rct) of CuNPs-CNTSPE was found to be 20-fold lower than that of CNTSPE. The CuNPs-CNTSPE displayed an oxidation peak for dopamine at -0.08 V which is ∼80 mV lower than the one detected using CNTSPE. The modified electrode was used in microfluidic flow injection analysis and offline systems for sensitive detection of dopamine (DA). The pH, flow rate, loop volume, concentration, and type of surfactant were all optimized for on-chip detection. Under the optimal conditions, using phosphate electrolyte solution (pH 6) containing 0.05% (w/v) Tween 20® as the carrier at a flow rate of 0.6 mL min-1 and a loop volume of 50 μL, the calibration curve was linear from 1.5 to 500 nM with a limit of detection of 0.33 nM. This technique was used for the successful detection of DA in real samples with recovery ranging from 96.5% to 103.8%. The microfluidic FIA system described here has the potential to be used as an electrochemical point-of-care device for rapid DA detection with high sensitivity and reproducibility.

TiO2/MWCNT/Nafion-Modified Glassy Carbon Electrode as a Sensitive Voltammetric Sensor for the Determination of Hydrogen Peroxide

In this work we describe a straightforward approach for creating a nanocomposite comprising multiwalled carbon nanotubes (MWCNTs) and titanium dioxide (TiO2) using the hydrothermal technique, which is then characterized by scanning electron microscope (SEM), energy-dispersive X-ray spectrometer (EDS), X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), and thermal gravimetric analysis (TGA) to assess its properties. Nafion is employed as a reticular agent for the nanocomposite on the glassy carbon electrode (GCE), creating the MWCNT/TiO2/Nafion/GCE system. The electrochemical behavior of the system was evaluated using cyclic voltammetry, revealing its remarkable electrocatalytic activity for detecting hydrogen peroxide in water. The developed sensor showcased a broad linear response range of 14.00 to 120.00 μM, with a low detection limit of 4.00 μM. This electrochemical sensor provides a simple and highly sensitive method for detecting hydrogen peroxide in aqueous solutions and shows promising potential for various real-world applications, particularly in H2O2 monitoring.

Experimental and theoretical approaches to interactions between DNA and purine metabolism products

Deoxyribonucleic acid (DNA) is a significant target for small organic and inorganic drug molecules. Understanding the DNA interaction mechanism of these molecules is vital for new drug designs. In this work, interactions between xanthine (XT), theophylline (TP), and theobromine (TB) with calf-thymus double-strained DNA (dsDNA) were monitored via an experimental and theoretical approach. Experimentally, cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques were used on the surface of the NiO/MWCNT/NNaM/PGE electrochemical platform in vitro. Kinetic parameters, including diffusion coefficients, surface concentrations, and standard heterogeneous rate constants, were measured in the absence and presence of DNA using scan rate studies. In the presence of DNA, kinetic parameters were observed to be reduced significantly. Thermodynamic parameters, such as DNA binding constants and standard free Gibbs energies, were calculated for each molecule using the CV and DPV techniques. Both techniques suggested a binding affinity order of XT > TB > TP. Theoretically, density functional theory was applied for geometry optimization, natural bond orbital analyses, and molecular orbital energies of XT, TP, and TB. Experimental and theoretical binding affinities confirm each other. The most energetically stable ligand-DNA complexes expressed that XT, TP, and TB interact with dsDNA via minor groove binding mode, using mostly hydrogen bonds.

Efficient photoelectrochemical aptasensing of di-2-ethylhexyl phthalate in environmental samples based on N, S co-doped graphene quantum dots/TiO2 nanorods

An efficient photoelectrochemical (PEC) sensing platform was developed for detection of di-2-ethylhexyl phthalate (DEHP) based on nitrogen and sulfur co-doped graphene quantum dots/TiO₂ nanorods (N, S-GQDs/TiO₂ NRs) coupling with exonuclease I (Exo I)-assisted target recycling for remarkable signal amplification. N, S-GQDs uniformly grown on TiO₂ NRs by simple hydrothermal method showed high electron-hole separation efficiency and superior photoelectric performance, which was explored as the photoactive substrate for anchoring anti-DEHP aptamer and its complementary DNA (cDNA). With the addition of DEHP, aptamer molecules fell from the electrode surface owing to the specific recognition of aptamer to DEHP, resulting in the increment of photocurrent signal. At this moment, Exo I could stimulate aptamer hydrolysis in the aptamer-DEHP complexes, so that DEHP was released from the complexes to take part in the next reaction cycling, which remarkably increasing the photocurrent response and achieving signal amplification. The designed PEC sensing platform exhibited excellent analytical performance for DEHP with a low detection limit of 0.1 pg L^-1. Also, its applications in real samples were further investigated in detail. Thus, the established method would provide a simple and efficient tool for DEHP or other pollutants monitoring in the environment.

Studies on the Detection of Oleuropein from Extra Virgin Olive Oils Using Enzymatic Biosensors

Oleuropein (OLEU) is an important indicator of the quality and authenticity of extra virgin olive oils (EVOO). Electrochemical sensors and biosensors for the detection of oleuropein can be used to test the adulteration of extra virgin olive oils. The present study aimed at the qualitative and quantitative determination of oleuropein in commercial EVOO samples by applying electrochemical techniques, cyclic voltammetry (CV) and square wave voltammetry (SWV). The sensing devices used were two newly constructed enzyme biosensors, supported on single-layer carbon-nanotube-modified carbon screen-printed electrode (SPE/SWCNT) on whose surface tyrosinase (SPE/SWCNT/Tyr) and laccase (SPE/SWCNT/Lac) were immobilized, respectively. The active surfaces of the two biosensors were analyzed and characterized by different methods, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and Fourier transform infrared spectroscopy (FTIR) and the results confirmed the efficient immobilization of the enzymes. SPE/SWCNT/Tyr was characterized by a low detection limit (LOD = 9.53 × 10⁻⁸ M) and a very good sensitivity (0.0718 μA·μM⁻¹·cm⁻²) over a wide linearity range from 0.49 to 11.22 μM. The process occurring at the biosensor surface corresponds to kinetics (h = 0.90), and tyrosinase showed a high affinity towards OLEU. The tyrosinase-based biosensor was shown to have superior sensitive properties to the laccase-based one. Quantitative determination of OLEU in EVOOs was performed using SPE/SWCNT/Tyr and the results confirmed the presence of the compound in close amounts in the EVOOs analysed, proving that they have very good sensory properties.

Ti3C2Tx (MXene)/Pt nanoparticle electrode for the accurate detection of DA coexisting with AA and UA

Dopamine (DA), uric acid (UA) and ascorbic acid (AA) are biomolecules widely distributed in the human body and play an important role in many physiological processes. An abnormal concentration of them is associated with various diseases. Thus, the accurate and fast detection of them has been one of the major demands in the healthcare industry. In this study, we demonstrate that Ti₃C₂T_x/PtNP modified glassy carbon electrodes (GCEs) show a good electrochemical performance in the detection of DA and UA. However, there is no response signal to AA for either the CV or DPV curve due to the electrostatic repulsion between the negatively charged electrode surface and the negatively charged AA. Ti₃C₂T_x(MXene)/Pt nanoparticles (PtNPs) are prepared by etching Ti₃AlC₂(MAX) with HF and reducing H₂PtCl₆ with a NaBH₄ aqueous solution. The morphology of Ti₃C₂T_x/PtNPs is multilayered accordion-like Ti₃C₂T_x decorated with PtNPs with a diameter of 10-20 nm. Furthermore, it is found that the electrochemical detection of DA will be enhanced by AA. The electrochemical detection rule of AA enhanced DA can be expressed as follows: I_(DA+AA) = 0.011216C_AA + 0.039950C_DA + 1.1175(I_(DA+AA) is the peak current of DA coexisting with AA. C_AA is the concentration of AA. C_DA is the concentration of DA). This can be used as a calibration to correct the concentration of DA when AA and DA coexist. Notably, AA promotes the stability of the electrode because it cleans the oxidation products from the electrode surface in time. In addition, the sensor exhibits good reproducibility and satisfactory recovery results in a real sample.

Fabrication and application of three-dimensional nanocomposites modified electrodes for evaluating the aging process of Huangjiu (Chinese rice wine)

In this study, three modified glassy carbon electrodes based on three-dimensional conducting polymer nanocomposites (TDCPNs) were fabricated for evaluating the aging process of Huangjiu (Chinese rice wines). The electrochemical activity and experimental conditions of the TDCPNs modified electrodes were investigated by cyclic voltammetry, the aging information obtained by the modified electrodes were optimized by variance inflation factor (VIF). Principal components analysis (PCA), locally linear embedding (LLE), and locality preserving projection (LPP, which presented the best classification result) based on the optimized data were applied to classify the wine samples. Then, the dimensionality reduction data of PCA, LLE, and LPP were used as input variables of the logistic regression and extreme learning machine (ELM) for evaluating the aging process of Huangjiu, and the LLE-ELM method exhibited the best prediction results. These results demonstrated that the TDCPNs modified electrodes presented the potential for the quality analysis of food and beverages.

Simultaneous quantification of seven multi-class organic molecules by single-shot dilution differential pulse voltammetric calibration

The contamination of water sources by anthropogenic activities is a topic of growing interest in the scientific community. Therefore, robust analytical techniques for the determination and quantification of multiple substances are needed, which often require complex and time-consuming procedures. In this context, we describe a univariate calibration method to determine emerging multi-class contaminants in different water sources. The instrumental setup is composed of a lab-made glass electrochemical cell with three electrodes: Pt counter, Ag/AgCl reference, and BDD working electrodes. With this system, we were able to simultaneously quantify tert-butylhydroquinone, acetaminophen, estrone, sulfamethoxazole, enrofloxacin, caffeine, and ibuprofen by differential pulse voltammetry. Only two calibration solutions are required for the Single-shot Dilution Differential Pulse Voltammetric Calibration (SSD-DP-VC) method described here, which can significantly improve sample throughput. Two robust univariate calibration strategies were also applied and compared with SSD-DP-VC. The new method is simple, fast, and comparable with traditional calibration methods, showing similar precision and accuracy for all determinations evaluated.

Novel lanthanum vanadate-based nanocomposite for simultaneously electrochemical detection of dopamine and uric acid in fetal bovine serum

The abnormal levels of two biological molecules, dopamine (DA) and Uric acid (UA), in human body are symptoms of diseases such as Parkinson's disease and arrhythmia. A novel lanthanum vanadate and multi-walled carbon nanotubes (LaV-MWCNTs) composite modified glassy carbon electrode (GCE) was developed and utilized as an efficient electrochemical sensor for the simultaneous detection of DA and UA. LaV-MWCNTs composite was successfully fabricated by a facile ultrasonic self-assembly method and identified by means of a series of successive measurements including XPS, XRD, FT-IR and FE-SEM. The LaV-MWCNTs modified GCE shows the concentration linear ranges of DA and UA are 2-100 μΜ using DPV. The limits of detection (LODs; signal-to-noise ratio of 3, S/N = 3) of the LaV-MWCNTs modified GCE sensor for DA and UA were calculated to be 0.046 μM and 0.025 μM, respectively. The feasibility of using the LaV-MWCNTs modified GCE sensor to detect DA and UA in a typical biological fluid, fetal bovine serum, was also evaluated by the standard addition method.

Carbon Nanotubes, Graphene, and Carbon Dots as Electrochemical Biosensing Composites

Carbon nanomaterials (CNMs) have been extensively used as electrochemical sensing composites due to their interesting chemical, electronic, and mechanical properties giving rise to increased performance. Due to these materials' unknown long-term ecological fate, care must be given to make their use tractable. In this review, the design and use of carbon nanotubes (CNTs), graphene, and carbon dots (CDs) as electrochemical sensing electrocatalysts applied to the working electrode surface are surveyed for various biosensing applications. Graphene and CDs are readily biodegradable as compared to CNTs. Design elements for CNTs that carry over to graphene and CDs include Coulombic attraction of components and using O or N atoms that serve as tethering points for attaching electrocatalytically active nanoparticles (NPs) and/or other additives.

Disposable Voltammetric Sensor Modified with Block Copolymer-Dispersed Graphene for Simultaneous Determination of Dopamine and Ascorbic Acid in Ex Vivo Mouse Brain Tissue

Dopamine (DA) and ascorbic acid (AA) are two important biomarkers with similar oxidation potentials. To facilitate their simultaneous electrochemical detection, a new voltammetric sensor was developed by modifying a screen-printed carbon electrode (SPCE) with a newly synthesized block copolymer (poly(DMAEMA-b-styrene), PDbS) as a dispersant for reduced graphene oxide (rGO). The prepared PDbS–rGO and the modified SPCE were characterized using a range of physical and electrochemical techniques including Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy, and linear sweep voltammetry. Compared to the bare SPCE, the PDbS–rGO-modified SPCE (PDbS–rGO/SPCE) showed better sensitivity and peak-to-peak separation for DA and AA in mixed solutions. Under the optimum conditions, the dynamic linear ranges for DA and AA were 0.1–300 and 10–1100 µM, and the detection limits were 0.134 and 0.88 µM (S/N = 3), respectively. Furthermore, PDbS–rGO/SPCE exhibited considerably enhanced anti-interference capability, high reproducibility, and storage stability for four weeks. The practical potential of the PDbS–rGO/SPCE sensor for measuring DA and AA was demonstrated using ex vivo brain tissues from a Parkinson’s disease mouse model and the control.

Synthesis of a clustered carbon aerogel interconnected by carbon balls from the biomass of taros for construction of a multi-functional electrochemical sensor

In this study, a clustered carbon aerogel interconnected by carbon balls (CCAI-CB) was prepared as an electrode material to construct a multi-functional electrochemical sensor. CCAI-CB derived from taros (Colocasia esculenta (L). Schott) possesses meso-macroporous structure and plenty of defective sites, and shows notable activity in electrocatalysis as an electrode material. We investigated the application of CCAI-CB modified glassy carbon electrode (CCAI-CB/GCE) for determination of ascorbic acid (AA) and hydrogen peroxide (H₂O₂). Compared with carbon nanotubes (CNTs) modified GCE (CNTs/GCE) and bare GCE, CCAI-CB/GCE shows lower detection limit (0.23 μM for AA and 1.31 μM, S/N = 3), higher sensitivities (220.53, 148.86 or 94.39 μA mM^-1 cm^-2 for AA and 83.06 or 49.07 μA mM^-1 cm^-2 for H₂O₂). Concentrations of AA and H₂O₂ in real samples were determined at CCAI-CB/GCE with satisfactory detection results obtained. In addition, when the CCAI-CB/GCE was used for electrocatalysis of other biomolecules, it also exhibits high electrochemical activity. Thus, CCAI-CB could be a promising electrode material for the construction of multi-functional electrochemical sensors.

Gold-Platinum Core-Shell Nanoparticles with Thiolated Polyaniline and Multi-Walled Carbon Nanotubes for the Simultaneous Voltammetric Determination of Six Drug Molecules

In this proof-of-concept study, a novel nanocomposite of the thiolated polyaniline (tPANI), multi-walled carbon nanotubes (MWCNTs) and gold–platinum core-shell nanoparticles (Au@Pt) (tPANI-Au@Pt-MWCNT) was synthesized and utilized to modify a glassy carbon electrode (GCE) for simultaneous voltammetric determination of six over-the-counter (OTC) drug molecules: ascorbic acid (AA), levodopa (LD), acetaminophen (AC), diclofenac (DI), acetylsalicylic acid (AS) and caffeine (CA). The nanocomposite (tPANI-Au@Pt-MWCNT) was characterized with transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS). Using the sensor (GCE-tPANI-Au@Pt-MWCNT) in connection with differential pulse voltammetry (DPV), the calibration plots were determined to be linear up to 570.0, 60.0, 60.0, 115.0, 375.0 and 520.0 µM with limit of detection (LOD) of 1.5, 0.25, 0.15, 0.2, 2.0, and 5.0 µM for AA, LD, AC, DI, AS and CA, respectively. The nanocomposite-modified sensor was successfully used for the determination of these redox-active compounds in commercially available OTC products such as energy drinks, cream and tablets with good recovery yields ranging from 95.48 ± 0.53 to 104.1 ± 1.63%. We envisage that the electrochemical sensor provides a promising platform for future applications towards the detection of redox-active drug molecules in pharmaceutical quality control studies and forensic investigations.