Heavy metal pollution: Insights into chromium eco-toxicity and recent advancement in its remediation

Tag-free fluorometric aptasensor for detection of chromium(VI) in foods via SYBR Green I signal amplification and aptamer structure transition

BACKGROUND

In response to growing concerns regarding heavy metal contamination in food, particularly chromium (Cr)(VI) contamination, this study presented a simple, sensitive and practical method for Cr(VI) detection.

RESULTS

A magnetic separation-based capture-exponential enrichment ligand system evolution (SELEX) method was used to identify and characterize DNA aptamers with a high affinity for Cr(VI). An aptamer, Cr-15, with a dissociation constant (Kd) of 4.42 ± 0.44 μmol L-1 was obtained after only eight rounds of selection. Further innovative methods combining molecular docking, dynamic simulation and thermodynamic analysis revealed that CrO4 2- could bind to the 19th and 20th guanine bases of Cr-15 via hydrogen bonds. Crucially, a label-free fluorometric aptasensor based on SYBR Green I was successfully constructed to detect CrO4 2-, achieving a linear detection range of 60-300 nmol L-1 with a lower limit of detection of 44.31 nmol L-1. Additionally, this aptasensor was able to quantitatively detect CrO4 2- in grapes and broccoli within 40 min, with spike recovery rates ranging from 89.22% to 108.05%. The designed fluorometric aptasensor exhibited high selectivity and could detect CrO4 2- in real samples without sample processing or target pre-enrichment.

CONCLUSION

The aptasensor demonstrated its potential as a reliable tool for monitoring Cr(VI) contamination in fruit and vegetable products. © 2024 Society of Chemical Industry.

Characterization of the composition, structure, and functional potential of bamboo rhizosphere archaeal communities along a chromium gradient

Introduction

Bamboo can be used in the phytoremediation of heavy metal pollution. However, the characteristics of the bamboo rhizosphere archaeal community in Cr-contaminated soil under field conditions remain unclear.

Methods

In this study, high-throughput sequencing was used to examine the rhizosphere soil archaeal communities of Lei bamboo (Phyllostachys precox) plantations along a Cr pollution gradient.

Results

The results revealed U-shaped relationships between Cr [total Cr (TCr) or HCl-extractable Cr (ACr)] and two alpha indices (Chao1 and Shannon) of archaea. We also established that high Cr concentrations were associated with a significant increase in the abundance of Thaumarchaeota and significant reductions in the abundances of Crenarchaeota and Euryarchaeota. The archaeal co-occurrence networks reduced in complexity with Cr pollution, decreasing the community's resistance to environmental disturbance. Candidatus nitrosotalea and Nitrososphaeraceae_unclassified (two genera of Thaumarchaeota) were identified as keystone taxa. The community structure of soil archaeal communities was also found to be affected by TCr, ACr, pH, total organic C, and available nutrient (N, P, and K) concentrations, with pH being identified as the most reliable predictor of the archaeal community in assessed soils.

Discussion

These findings enhance our understanding of microbial responses to Cr pollution and provide a basis for developing more refined approaches for the use of bamboo in the remediation of Cr-contaminated soils.

Colorimetric Detection of Cu2+ and Ag+ Ions Using Multi-Responsive Schiff Base Chemosensor: A Versatile Approach for Environmental Monitoring

In this study, we have synthesized a novel Schiff base-centered chemosensor, designated as SB, with the chemical name ((E)-1-(((6-methylbenzo[d]thiazol-2-yl) imino)methyl)naphthalen-2-ol). This chemosensor was structurally characterized by FT-IR, 1H NMR, UV-Vis and fluorescence spectroscopy. After structural characterization the chemosensor SB was subsequently employed for the detection of Cu2+ and Ag+, using fluorescence spectroscopy. The chemosensor SB showed excellent ability to recognize the target metal ions, leading to fluorescence enhancement and color change from yellow to yellowish orange for Cu2+ and yellow to radish for Ag+ ions. The detection capabilities of this chemosensor were impressive, showing excellent selectivity and an exceptionally low detection limit of 0.0016 µM for Cu2+ and 0.00389 µM for Ag+. Most notably, our approach enables the quantitative detection both metal ions in different water and soil samples at trace level. This achievement holds great promise for analytical applications and offers significant contributions to the field of chemical sensing and environmental protection.

Assessment of heavy metal contamination in street dust: concentrations, bioaccessibility, and human health risks in coal mine and thermal power plant complex

Coal mining has also been associated with adverse environmental and health impacts including cancer and respiratory disorders, with the presence of thermal power plants exacerbating the problem of heavy metal pollution. Minimal studies have been conducted on the environmental impacts, health risks, and bioaccessibility of heavy metals in coal mine areas. Consequently, samples of street dust were collected from different locations in the Singrauli mine complex and analysed. Heavy metals (Cu, Ni, Zn, Cr, Co, As, and Mo) were found to be higher than the background concentration, with the maximum concentration was found in areas close to the Thermal Power Plants, like Near Vindyachal TPP, Near Shakti Nagar TPP, and Anpara. The highest geo-accumulation index value was found for Co, Mo, Zn, and As, indicating moderate to strong pollution levels. Health risk assessment (for both adults and children) revealed that Cr and Fe posed significantly higher Hazard Quotient and Hazard Index (HI) values, indicating significant non-carcinogenic threats. Moreover, Carcinogenic Risk (CR) values for Cd, Cr, and Ni indicated a risk of carcinogenicity to the public exposed to road dust. The study also examined the bioaccessibility of the metals, which showed that the gastric phase accumulated a higher percentage of Ni (42.52%), Pb (34.79%), Co (22.22%), As (20%) and Cu (15%) than the intestinal phase. Strong positive correlation was observed between metal concentration (Cu, Pb, Cr, Fe, Zn, and Mn), HI, and CR of adult and child, while bioaccessibility of intestinal phase was positively correlated with gastric phase of metals (Cu, Ni, Co, As, and Mn).

A review on chromium health hazards and molecular mechanism of chromium bioremediation

Living beings have been devastated by environmental pollution, which has reached its peak. The disastrous pollution of the environment is in large part due to industrial wastes containing toxic pollutants. The widespread use of chromium (Cr (III)/Cr (VI)) in industries, especially tanneries, makes it one of the most dangerous environmental pollutants. Chromium pollution is widespread due to ineffective treatment methods. Bioremediation of chromium (Cr) using bacteria is very thoughtful due to its eco-friendly and cost-effective outcome. In order to counter chromium toxicity, bacteria have numerous mechanisms, such as the ability to absorb, reduce, efflux, or accumulate the metal. In this review article, we focused on chromium toxicity on human and environmental health as well as its bioremediation mechanism.

A multifunctional adsorbent based on 2,3-dimercaptosuccinic acid/dopamine-modified magnetic iron oxide nanoparticles for the removal of heavy-metal ions

Overexploitation of nature by humans has led to an increasingly serious issue of heavy-metal water pollution. To reduce the threat of water pollution to humans and the environment, it is imperative to develop or improve the water treatment technology for heavy-metal-containing wastewater. Functionalized Fe₃O₄ magnetic nanoparticles (Fe₃O₄ MNPs) have been widely used as effective adsorbents for the removal of heavy-metal ions from water owing to their high efficiency, low cost, selective adsorption ability, and recyclability. In this study, Fe₃O₄@DA-DMSA magnetic nanoparticles (FDDMs) were prepared by the functionalization of Fe₃O₄ MNPs with environmentally friendly dopamine (DA) and a heavy-metal detoxifying agent such as 2,3-dimercaptosuccinic acid (DMSA) for the efficient and rapid adsorption of Pb²⁺, Cu²⁺, and Cd²⁺, with maximum adsorption capacities of 187.62, 63.01, and 49.46 mg/g, respectively. FDDMs exhibited the best ability to remove Pb²⁺ with a maximum adsorption capacity than that of the most reported Fe₃O₄ MNP-related adsorbents. In actual wastewater and multi-component simulated water samples contaminated with Pb²⁺, Cu²⁺, and Cd²⁺, the as-prepared adsorbent maintained a good removal ability for Pb²⁺ with low influence by ionic strength and interfering ions, as well as exhibited an excellent selectivity. According to the results of batch experiments and X-ray photoelectron spectroscopy (XPS) analysis of the adsorbent before and after adsorption, the adsorption mechanism of the adsorbent for the removal of heavy-metal ions mainly involves coordination and ion exchange. In addition, the adsorbent exhibited a good regeneration performance. Therefore, FDDMs can be considered as a promising adsorbent for the treatment of heavy-metal wastewater.

Heavy Metal Removal from Aqueous Effluents by TiO2 and ZnO Nanomaterials

The presence of heavy metals in wastewater, such as Ni, Pb, Cd, V, Cr, and Cu, is a serious environmental problem. This kind of inorganic pollutant is not biodegradable for several years, and its harmful effect is cumulative. Recently, semiconductor nanomaterials based on metal oxides have gained interest due to their efficiency in the removal of heavy metals from contaminated water, by inducing photocatalytic ion reduction when they absorb light of the appropriate wavelength. The most commonly applied semiconductor oxides for these purposes are titanium oxide (TiO2), zinc oxide (ZnO), and binary nanomaterials composed of both types of oxides. The main purpose of this work is to critically analyse the existent literature concerning this topic focusing specially in the most important factors affecting the adsorption or photocatalytic capacities of this type of nanomaterials. In particular, photocatalytic activity is altered by various factors, such as proportion of polymorphs, synthesis method, surface area, concentration of defects and particle size, among others. After a survey of the actual literature, it was found that, although these metal oxides have low absorption capacity for visible light, it is possible to obtain an acceptable heavy metal reduction performance by sensitization with dyes, doping with metallic or nonmetallic atoms, introduction of defects, or the coupling of two or more semiconductors.

Polyacrylate stabilized ZVI/Cu bimetallic nanoparticles for removal of hexavalent chromium from wastewater

In this work, a magnetic core-shell composite zero-valent iron/copper-polyacrylate (ZVI/Cu-PAA) was synthesized by a simple liquid-phase reduction process and used for hexavalent chromium Cr(VI) removal from wastewater. The optimization experiments show that the optimal dosages of polyacrylate and Cu are 7.00 wt% and 8.25 wt%, respectively. The maximum adsorption capacity and removal rate of Cr(VI) by ZVI/Cu-PAA reached 106.12 mg g^-1 and 99.05% at pH 5.5, respectively. Furthermore, the presence of coexisting ions such as Ca²⁺, Mg²⁺, Na⁺, and NO₃^- had no significant effect on its Cr(VI) removal performance. The excellent performance of ZVI/Cu-PAA is attributed to that the modification of polyacrylate can not only give more active sites but also inhibit agglomeration of nano-metallic particles, while Cu doping promotes the electron generation and transformation of Fe(III)/Fe(II) and Cu(II)/Cu(I) redox cycles. This makes ZVI/Cu-PAA has rich active sites and excellent stability, and has broad application prospects in the remediation of Cr (VI) polluted wastewater. The magnetic core-shell composite ZVI/Cu-PAA has excellent Cr (VI) removal performance because of its rich active sites and high electron transformation efficiency.

Insights into remediation effects and bacterial diversity of different remediation measures in rare earth mine soil with SO4 2- and heavy metals

The increased demand for rare earth resources has led to an increase in the development of rare earth mines (REMs). However, the production of high-concentration leaching agents (SO₄ ^2-) and heavy metals as a result of rare earth mining has increased, necessitating the removal of contaminants. Here, a series of experiments with different remediation measures, including control (CK), sulfate-reducing bacteria (SRB) alone (M), chemicals (Ca(OH)₂, 1.5 g/kg) plus SRB (CM-L), chemicals (Ca(OH)₂, 3.0 g/kg) plus SRB (CM-M), and chemicals (Ca(OH)₂, 4.5 g/kg) plus SRB (CM-H), were conducted to investigate the removal effect of SO₄ ^2-, Pb, Zn, and Mn from the REM soil. Then, a high-throughput sequencing technology was applied to explore the response of bacterial community diversity and functions with different remediation measures. The results indicated that CM-M treatment had a more efficient removal effect for SO₄ ^2-, Pb, Zn, and Mn than the others, up to 94.6, 88.3, 98.7, and 91%, respectively. Soil bacterial abundance and diversity were significantly affected by treatments with the inoculation of SRB in comparison with CK. The relative abundance of Desulfobacterota with the ability to transform SO₄ ^2- into S^2- increased significantly in all treatments, except for CK. There was a strong correlation between environmental factors (pH, Eh, SO₄ ^2-, Pb, and Zn) and bacterial community structure. Furthermore, functional prediction analysis revealed that the SRB inoculation treatments significantly increased the abundance of sulfate respiration, sulfite respiration, and nitrogen fixation, while decreasing the abundance of manganese oxidation, dark hydrogen oxidation, and denitrification. This provides good evidence for us to understand the difference in removal efficiency, bacterial community structure, and function by different remediation measures that help select a more efficient and sustainable method to remediate contaminants in the REM soil.

Chromium Contamination and Health Risk Assessment of Soil and Agricultural Products in a Rural Area in Southern China

With the rapid development of industry, chromium (Cr) pollutants accumulate constantly in the soil, causing severe soil Cr pollution problems. Farmland Cr pollution hurts the safety of agricultural production and indirectly affects human health and safety. However, the current situation of Cr pollution in farmland soil and crops has not been detailed enough. In this study, the evaluation of Cr potential risk in soil-crop systems was conducted in a rural area that was affected by industry and historic sewage irrigation. Ten different crops and rhizosphere soils were sampled from four fields. The results showed that Cr contents in farmland soil exceeded the national standard threshold in China (>21.85%), and the Cr content in edible parts of some agricultural products exceeded that too. According to the PCA and relation analysis, the Cr accumulation in edible parts showed a significant correlation with soil Cr contents and available potassium contents. Except for water spinach, the target hazard quotient (THQ) of the other crops was lower than 1.0 but the carcinogenic health risks all exceeded the limits. The carcinogenic risks (CR) of different types of crops are food crops > legume crops > leafy vegetable crops and root-tuber crops. A comprehensive assessment revealed that planting water spinach in this area had the highest potential risk of Cr pollution. This study provided a scientific and reliable approach by integrating soil environmental quality and agricultural product security, which helps evaluate the potential risk of Cr in arable land more efficiently and lays technical guidelines for local agricultural production safety.

Influence of local geological data and geographical parameters to assess regional health impact in LCA. Tomsk oblast', Russian Federation application case

The research paper is aimed to modify the human health impact assessment of Cr in soils. The current article presents the input of several critical parameters for the human health Impact Score (IS_hum) assessment in soils. The modification of the IS_hum is derived using geological data - results of neutron activation analysis of soils are used in the IS_hum calculation; research area is divided using the watersheds and population size and density. Watersheds reflect the local environmental conditions of the territory unlike the administrative units (geographical areas of the studied region) due to their geological independence. The calculations of the characterization factor value underestimate the influence of the population size and density on the final result. Default characterization factor values cannot be considered during the assessment of the potential human health impact for the big sparsely inhabited areas. In case of very low population density, the result will be overrated and underestimated in the opposite case. The current approach demonstrates that the geographical separation in the USEtox model should be specified. The same approach can be utilized for other geo zones due to the accessibility of this information (area size, population size, and density, geological, and landscape features).

Recent Strategies for Bioremediation of Emerging Pollutants: A Review for a Green and Sustainable Environment

Environmental pollution brought on by xenobiotics and other related recalcitrant compounds have recently been identified as a major risk to both human health and the natural environment. Due to their toxicity and non-biodegradability, a wide range of pollutants, such as heavy metals, polychlorinated biphenyls, plastics, and various agrochemicals are present in the environment. Bioremediation is an effective cleaning technique for removing toxic waste from polluted environments that is gaining popularity. Various microorganisms, including aerobes and anaerobes, are used in bioremediation to treat contaminated sites. Microorganisms play a major role in bioremediation, given that it is a process in which hazardous wastes and pollutants are eliminated, degraded, detoxified, and immobilized. Pollutants are degraded and converted to less toxic forms, which is a primary goal of bioremediation. Ex situ or in situ bioremediation can be used, depending on a variety of factors, such as cost, pollutant types, and concentration. As a result, a suitable bioremediation method has been chosen. This review focuses on the most recent developments in bioremediation techniques, how microorganisms break down different pollutants, and what the future holds for bioremediation in order to reduce the amount of pollution in the world.

A Review on Recent Progress in Organic Fluorimetric and Colorimetric Chemosensors for the Detection of Cr3+/6+Ions

Chromium occurs in the environment primarily in two valence states, trivalent Cr3+ and hexavalent Cr6+, which have different physicochemical and biochemical properties. However, the higher concentration of Cr3+/6+ can cause various adverse effects on human health. Therefore, detecting Cr3+/6+ ions is important in various samples. Colorimetric and fluorescent chemosensors are the most powerful tools for the detection of Cr3+/6+ ions. These chemosensors have excellent bioimaging capability and significant sensitivity and selectivity. In this article, different colorimetric and fluorescent chemosensors based on organic compounds, including Schiff base, antipyrine, diarylethene, pyrene, crown ether, dansyl, pyridine, thiazole, coumarin, boradiazaindacene, rhodamine, imidazole, hydrazone, and other functional groups for detection of Cr3+/6+ ions have been reviewed, classified them according to different fluorophore and recognition mode. I hope this article will help the readers for the future design of highly effective, sensitive, and selective chemosensors for the detection and determination of Cr3+/6+ ions.

Aprovechamiento de residuos de Eichhornia Crassipes para la remoción de Cr (vi) en aguas residuales simuladas

Eichhornia crassipes es una planta considerada una plaga para los diferentes ecosistemas acuáticos en el mundo. Además el Cr (VI) es un contaminante acuático altamente tóxico. Se estudió la capacidad de adsorción de la Eichhornia crassipes como bioadsorbente para la remoción de Cr (VI) presente en un agua residual simulada. La concentración del ion en solución, pH y temperatura fueron estudiadas como variables en un diseño experimental factorial simétrico, y mediante análisis ANOVA. La mayor capacidad de adsorción Cr (VI) (2.5 mgꞏg-1) se obtuvo a 75 ppm de Cr (VI), pH de 1.5 y 45 °C. Se observaron grupos funcionales superficiales que mediante atracción electrostática y formación de puentes de hidrógeno favorecieron la adsorción de Cr (VI). Esto permite concluir que el bioadsorbente es efectivo para la remoción de Cr (VI) en solución con un proceso simple y de bajo costo. Eichhornia crassipes commonly called water hyacinth, is a plant considered a pest for the different aquatic ecosystems in the world. Furthermore, Cr (VI) is a highly toxic aquatic pollutant. In order to contribute to the solution of these two environmental problems, the adsorption capacity of water hyacinth as a bioadsorbent was studied for the removal of Cr (VI) in a simulated wastewater. The ion concentration in solution, pH y temperature were studied using a symmetric factorial experimental design y applicating an ANOVA analysis. The highest Cr (VI) adsorption capacity (2.5 mgꞏg-1) was obtained at 75 ppm of Cr (VI), pH of 1.5 y 45 ° C. Surface functional groups were observed that, through electrostatic attraction y formation of hydrogen bonds, favored the adsorption of Cr (VI). This allows to conclude that this bioadsorbent is effective for the elimination of Cr (VI) in solution using a simple y low-cost process.

Ecological Risk Evaluation and Source Identification of Heavy Metal Pollution in Urban Village Soil Based on XRF Technique

The rapid urbanization in China has resulted in significant differences between urban and rural areas. The emergence of urban villages is inevitable in this context, for which complex problems regarding land use, industrial management and ecological environment have arisen. This study performed a case study on a typical urban village, by assessing heavy metal pollution and ecological risk in soil. It detected a total of 80 basic units through portable X-ray fluorescence (XRF) instrument. A total of 25 high-risk contaminated points were selected, sampled and analyzed in laboratory as confirmation. The results showed the mean concentrations of Pb, Cu, Zn and Ni in soil were significantly higher than background values. Pb, Zn and Ni showed obvious pairwise correlation, and the high-value zones could be attributed to automobile traffic and industrial activities. In addition, the pollution problem is complicated by a combination of agricultural activities, the absence of clear division between different functional zones, as well as a general lack of environmental awareness. All of these lead to increased ecological risk and are a serios threaten to public health.

Individual and Combined Effects of Manganese and Chromium on a Freshwater Chlorophyceae

Manganese (Mn), an essential metal in trace amounts, and chromium (Cr), a nonessential metal to algae, are often found in effluent discharges and may co-occur in contaminated aquatic environments. Therefore, we investigated the effects of Mn and Cr, and their mixtures, on a freshwater Chlorophyceae, Raphidocelis subcapitata, using a multiple endpoint approach. Regarding the single exposure of metals, Mn was 4 times more toxic (median inhibitory concentration at 72 h [IC50_72 h ] = 4.02 ± 0.45 µM Mn) than Cr (IC50_72 h  = 16.42 ± 4.94 µM Cr) for microalgae, considering the effects on the relative growth rate. Moreover, this species was the most sensitive to Mn, according to the species sensitivity distribution curve. Overall, the tested metals did not lead to significant changes in reactive oxygen species production, cellular complexity, and cell relative size but significantly decreased the algal growth and the mean cell chlorophyll a (Chl a) fluorescence at the highest concentrations (3.64-14.56 µM of Mn and 15.36-19.2 µM of Cr). The decreased mean cell Chl a fluorescence indicates an impact on pigment synthesis, which may be related to the observed growth inhibition. In the mixture tests, the reference models concentration addition and independent action were used to analyze the data, and the independent action model was the best fit to describe our results. Therefore, the Mn and Cr mixture was noninteractive, showing additive effects. This is the first study to address the combined toxicity of Mn and Cr regarding freshwater Chlorophyceae. Environ Toxicol Chem 2022;41:1004-1015. © 2022 SETAC.

The reduction of Cr(VI) in Salvinia minima, possible involvement of an h-type thioredoxin

Hexavalent chromium [Cr(VI)] is extremely toxic to plant cells and has been recognized to possess a high redox potential. Tolerant plant species have shown the ability to reduce Cr(VI), but the operating mechanism involved in this process is not elucidated. Thus, the aim of this study was to investigate the possible involvement of thiolic and phenolic compounds and thioredoxin expression during Cr(VI) reduction in S. minima. In addition, a probable enzymatic reduction of Cr(VI) was investigated. Plants were exposed to 20 mg L^-1 Cr(VI) concentration during 7 days under controlled conditions. The amount of metal accumulated in lacinias (root-like submerged leaves) and fronds (floating leaves) indicated that a low percentage of absorbed Cr(VI) was mobilized from lacinias to fronds. X-ray absorption near-edge structure (XANES) analysis revealed that Cr(III) was the only chromium species occurring in S. minima plants. Thiols and phenolics of lacinias and fronds were increased significantly by Cr(VI) treatment, but accumulation patterns were different. The expression of an h-type thioredoxin (Trx h) was demonstrated for the first time in Cr-exposed lacinias. Enzymatic reduction showed a low contribution to the Cr(VI) reduction. Data of this study provide evidences on the involvement of thiols, thioredoxin, and phenolics in the reduction of Cr(VI) to Cr(III) in S. minima tissues.

Sustainable removal of Cr(VI) using graphene oxide-zinc oxide nanohybrid: Adsorption kinetics, isotherms and thermodynamics

Metal-based adsorbents are limited for hexavalent chromium [Cr(VI)] adsorption from aqueous solutions because of their low adsorption capacities and slow adsorption kinetics. In the present study, decorated zinc oxide (ZnO) nanoparticles (NPs) on graphene oxide (GO) nanoparticles were synthesized via the solvothermal process. The deposition of ZnO NPs on graphene oxide for the nanohybrid (ZnO-GO) improves Cr(VI) mobility in the nanocomposite or nanohybrid, thereby improving the Cr(VI) adsorption kinetics and removal capacity. Surface deposition of ZnO on graphene oxide was characterized through Fourie Transform Infra-red (FTIR), UV-Visible, X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive Spectroscopy (EDS), and Brunauer-Emmett-Teller (BET) techniques. These characterizations suggest the formation of ZnO-GO nanocomposite with a specific area of 32.95 m²/g and pore volume of 0.058 cm²/g. Batch adsorption analysis was carried to evaluate the influence of operational parameters, equilibrium isotherm, adsorption kinetics and thermodynamics. The removal efficiency of Cr(VI) increases with increasing time and adsorbent dosage. FTIR, FESEM and BET analysis before and after the adsorption studies suggest the obvious changes in the surface functionalization and morphology of the ZnO-GO nanocomposites. The removal efficiency increases from high-acidic to neutral pH and continues to decrease under alkaline conditions as well. Mathematical modeling validates that the adsorption follows Langmuir isotherm and fits well with the pseudo 2nd order kinetics (Type 5) model, indicating a homogeneous adsorption process. The thermodynamics study reveals that Cr(VI) adsorption on ZnO-GO is spontaneous, endothermic, and entropy-driven. A negative value of Gibb's Free Energy represents the thermodynamic spontaneity and feasibility of the sorption process. To the best of our knowledge, this is the first study of Cr(VI) removal from aqueous solution using this hybrid nanocomposite at near-neutral pH. The synthesized nanocomposites prove to be excellent candidates for Cr(VI) removal from water bodies and natural wastewater systems.

Development of Chromium(III) Selective Potentiometric Sensors for Its Determination in Petroleum Water Samples Using Synthesized Nano Schiff Base Complex as an Ionophore

BACKGROUND

Many analytical techniques, such as X-ray fluorescence spectrometry, inductively coupled plasma atomic emission spectrometry (ICP-AES), and even traditional spectroscopic and fluorimetric methods, are used for the measurement of Cr(III) ions. These methods are sophisticated and very expensive. So, the chipset and the low cost ion selective electrodes were used.

OBJECTIVE

The quantification of Cr(III) ions in various samples of petroleum water using ion selective electrodes was suggested. Nano chromium modified carbon paste sensor (MCPE) and nano chromium modified screen printed sensor (MSPE) based on Schiff base Cr(III) complex are developed.

METHOD

The developed nano Cr(III) Schiff base chelate was characterized utilizing elemental, spectroscopic, and thermal analysis techniques. The proposed nano Cr(III) has a good properties for antibacterial and antifungal activity. The modified carbon paste and screen-printed sensors were fabricated for determination of Cr(III) ion.

RESULT

The proposed MCPE (sensor I) and MSPE (sensor II) obeys Nernstian equation upon incorporating nono Cr(III) ionophore in the paste at 25 °C with a trivalent cationic slope of 18.8 ± 0.2 and 20.0 ± 0.4 mV/decade. They have showed fast response time around 8 and 5 s, and they may be utilized for at least 98 and 240 days without significant changes in MCPE and MSPE potential, respectively. The sensors I and II showed good selectivity for Cr(III) ion toward a wide variety of metal ions or anions as confirmed by potentiometric selectivity coefficients values. The detection and quantification limits were defined alongside the other process validation parameters. The results have been compared well to those obtained by atomic absorption spectrometry (AAS) and the data of F- and t-test indicated no significant difference between the proposed and AAS methods.

CONCLUSION

These sensors have been utilized to determine Cr(III) ions in genuine spiked different petroleum well water samples with satisfactory percentage recoveries, low standard and relative standard deviation values using direct potentiometric and standard addition methods. The proposed method of producing nano Cr(III) complex as a sensor material possesses the distinct advantages of being simple, easily reproducible, appropriate for operation, and highly selective and sensitive.

HIGHLIGHTS

Modified carbon paste and screen-printed electrodes were fabricated based on nano Cr(III) complex as ionophore. The electrodes follow Nernstian behavior and they optimized according to IUPAC recommendation. They showed a high selectivity for Cr(III) ion over many bi or trivalent metal ions and anions. The results obtained compared well with those obtained using atomic absorption spectrometry (AAS). They successfully applied for determination of Cr(III) in petroleum water samples.