Volatile organic compounds in indoor environment and photocatalytic oxidation: state of the art

E-waste in the environment: Unveiling the sources, carcinogenic links, and sustainable management strategies

E-waste refers to the electrical and electronic equipment discarded without the intent of reuse or at the end of its functional lifespan. In 2022, approximately 62 billion kg of e-waste, equivalent to 7.8 kg per capita, was generated globally. With an alarming annual growth of approximately 2 million metric tonnes, e-waste production may exceed 82 billion kg by 2030. Improper disposal of e-waste can be detrimental to human health and the entire biosphere. E-waste encompasses a wide range of materials, including heavy metals, Polychlorinated Biphenyls (PCBs), Per- and Polyfluoroalkyl Substances (PFAS), Polycyclic Aromatic Hydrocarbons (PAHs), Polychlorinated Dibenzo-dioxins and -furans (PCDD/Fs), Polybrominated Diphenyl Ethers (PBDEs), and radioactive elements. E-waste, when disposed inappropriately can directly contaminate the aquatic and terrestrial environment, leading to human exposure through ingestion, inhalation, dermal absorption, and trans-placental transfer. These detrimental contaminants can directly enter the human body from the environment and may fuel carcinogenesis by modulating cell cycle proteins, redox homeostasis, and mutations. Heavy metals such as cadmium, mercury, arsenic, lead, chromium, and nickel, along with organic pollutants like PAHs, PCBs, PBDEs, PFAS, and radioactive elements, play a crucial role in inducing malignancy. Effective collection, sorting, proper recycling, and appropriate disposal techniques are essential to reduce environmental contamination with e-waste-derived chemicals. Hence, this comprehensive review aims to unravel the global environmental burden of e-waste and its links to carcinogenesis in humans. Furthermore, it provides an inclusive discussion on potential treatment approaches to minimize environmental e-waste contamination.

Levels, sources, and health risk assessment of phthalate acid esters in indoor dust of various microenvironments in university

Phthalate acid esters (PAEs), as a common group of plasticizers, are widely present in indoor environments and pose a risk to human health. Indoor dust samples collected from dormitory, classroom, laboratory, and office in several universities in China, were analyzed for seven types of PAEs. The total concentrations of seven PAEs (Σ7PAEs) ranged from 4.87 to 360 μg/g, with a median concentration of 51 μg/g, which is lower than that reported by other studies. Using the median concentration of Σ7PAEs as a metric, we assessed the levels of contamination in different microenvironments, resulting in the following ranking: dormitory > classroom > laboratory > office. There are significant differences in the levels of individual PAEs in different microenvironments. Radiation from sunlight, ventilation rates, cleaning frequency, and sprays were influential factors for the concentrations of individual PAEs in indoor dust. The indoor environmental conditions and consumption patterns profoundly affect PAEs levels. The sources of PAEs in classroom and office were more complex than in dormitory and laboratory. Daily intakes of PAEs were used to calculate carcinogenic and non-carcinogenic human risk for males and females, indicating a low health risk to humans. This is the first study to assess the risk of PAEs in university microenvironments and provides a valuable reference for further research.

Single Mn atom modulated molecular oxygen activation over TiO2 for photocatalytic formaldehyde oxidation

In single-atom catalysts, the atomically dispersed metal sites are pivotal for oxygen molecule activation. We hypothesize that dispersing single Mn atoms on TiO2 nanosheets may improve the photocatalytic oxidation of formaldehyde (HCHO) in the gas phase under ambient conditions. Density function theory (DFT) and experimental experiments were carried out to single Mn atoms not only improved the transfer of localized electrons and photogenerated electrons but also enhanced the activation/dissociation of O2 to generate monoatomic oxygen ions (O-) as the final reactive oxygen species (ROS). In photocatalytic experiments, Mn/TiO2 photocatalyst removed 100 % of HCHO at a low concentration of 7.6 ppm, and reaching excellent mineralization efficiency of over 99.6 %. According to the proposed reaction mechanism, O2 spontaneously adsorbs onto the Mn/TiO2 surface, forming two adsorbed O- after electron donation into the π2p* antibonding orbitals of O2. The adsorbed O- then reacts with gaseous HCHO to produce the key intermediate dioxymethylene (DOM), finally fulfilling a more favorable oxidation process on the Mn/TiO2 surface. This research illustrates the key role of O- in HCHO oxidation and paves the way for practical HCHO removal using TiO2-based photocatalysts.

Time-resolved spectroscopic investigation for the practical application of a photocatalytic air purifier

The photocatalytic efficiency for removing volatile organic compounds (VOCs) is significantly influenced by operational parameters like humidity and flow velocity, exhibiting notable and inconsistent fluctuations in both lab-scale and large-scale demonstrations. In this study, operando spectroscopy and isotope analysis were employed to investigate the correlation between humidity levels and degradation of gaseous acetaldehyde using TiO2 photocatalysts, aiming to demonstrate the scaling-up of photocatalytic air purifier. It was observed that rate constants for the mineralization of acetaldehyde rapidly decreased by 30% as relative humidity increased from 25% to 80% in the flow system (with an air velocity, v = 0.78 m/s). However, batch system showed smaller change with only a 10% reduction of the rate constant. Humidity fluctuations were more pronounced under high-speed conditions and were amplified in air purifier (v = 3.8 m/s). Time-resolved operando spectroscopy using an 13C isotope of acetaldehyde revealed that humidity's distinct role in dark adsorption and photocatalytic reactions. Water was found to inhibit the formation of crotonaldehyde during aldol condensation reaction in dark condition. Moreover, water suppressed photocatalytic mineralization by inhibiting acetate oxidation to formate. These findings provide valuable insights for improving realistic air purification processes, underscoring the importance of identifying key intermediates and controlling humidity to enhance the selectivity of gaseous pollutant oxidation reactions.

Micro- and Mesoporous Structural Effects of Beta Zeolites for Volatile Organic Compound Sorption

To fully exploit pore engineering in the design of more efficient zeolite adsorbents for volatile organic compound (VOC) treatment, the roles of meso- and micropores need to be clarified to provide the theoretical basis and feasible measures. In this work, the three VOC sorption properties of conventional and hierarchical porous beta zeolites were comparatively investigated to study the roles of meso- and micropores. There is a division of functions between micro- and mesopores, with micropores being the main VOC adsorption sites and mesopores greatly enhancing VOC diffusion and adsorbent reusability. On the one hand, micropores should be preserved as much as possible because obtaining mesopores by sacrificing micropores (i.e., alkali treatment) results in 28-60% decreases in adsorption capacities. On the other hand, mesopore introduction is highly desirable, which results in an enhancement of VOC intraparticle diffusion rates by 1.3-2.3 times (at the VOC concentration of 600 ppm) and chlorobenzene adsorption capacity on the 20th cycle increasing from 78% of the initial value to 89 and 93%. The findings may provide valuable information about zeolite-based adsorbents for adsorption removal or recovery of VOCs.

Cooperative and Bifunctional Adsorbent-Catalyst Materials for In-situ VOCs Capture-Conversion

Volatile organic compounds (VOCs) are gases that are emitted into the air from products or processes and are major components of air pollution that significantly deteriorate air quality and seriously affect human health. Different types of metals, metal oxides, mixed-metal oxides, polymers, activated carbons, zeolites, metal-organic frameworks (MOFs) and mixed-matrixed materials have been developed and used as adsorbent or catalyst for diversified VOCs detection, removal, and destruction. In this comprehensive review, we first discuss the general classification of VOCs removal materials and processes and outline the historical development of bifunctional and cooperative adsorbent-catalyst materials for the removal of VOCs from air. Subsequently, particular attention is devoted to design of strategies for cooperative adsorbent-catalyst materials, along with detailed discussions on the latest advances on these bifunctional materials, reaction mechanisms, long-term stability, and regeneration for VOCs removal processes. Finally, challenges and future opportunities for the environmental implementation of these bifunctional materials are identified and outlined with the intent of providing insightful guidance on the design and fabrication of more efficient materials and systems for VOCs removal in the future.

Precursor- and waste-free synthesis of spark-ablated nanoparticles with enhanced photocatalytic activity and stability towards airborne organic pollutant degradation

Photocatalyst synthesis typically involves multiple steps, expensive precursors, and solvents. In contrast, spark ablation offers a simple process of electrical discharges in a gap between two electrodes made from a desirable material. This enables a precursor- and waste-free generation of pure metal oxide nanoparticles or mixtures of various compositions. This study presents a two-step method for the production of photocatalytic filters with deposited airborne MnOx, TiO2, and ZnO nanoparticles using spark ablation and calcination processes. The resulting MnOx and TiO2 filters demonstrated almost twice the activity with outstanding performance stability, as compared to sol-gel MnO2 and commercial TiO2. The introduced method is not only simple, precursor- and waste-free, and leads to superior performance for the case studied, but it also has future potential due to its versatility. It can easily produce mixed and doped materials with further improved properties, making it an interesting avenue for future research.

Preparation of nano-MFI zeolites doped with Al/Ti and their performance in VOC sorption

Highly crystalline nano-MFI-type zeolites containing different elements were synthesized, and the sorption effects of the elements on volatile organic compounds (VOCs) were investigated. The results showed that the optimal toluene and acetone breakthrough time of the synthesized zeolites was 2.1 and 1.9 times as long as that of the commercial zeolite, respectively. For a weakly polar toluene molecule, MFI zeolites (aluminum-free) showed better adsorption properties than aluminum-containing zeolites. For the highly polar acetone molecule, zeolites with a Si/Al ratio of 87 showed the highest adsorption capacity, which was 7% higher than that of the all-silica zeolite and 1.4 times that of the commercial zeolite. Furthermore, MFI zeolites with Ti replacing part of Al proved to have better performance for highly polar molecules. In the adsorption process of VOCs, in addition to internal diffusion, diffusion on the external surface of the zeolite also played a remarkable role, and the adsorption data of all samples fitted better with the pseudo-first-order model. This study may provide a reliable structure-performance relationship for the synthesis of nanosized zeolite-based adsorbents and their use in the industrial recovery/treatment of VOCs.

Construction of CdS@g-C3N4 heterojunction photocatalyst for highly efficient degradation of gaseous toluene

Exploring efficient photocatalysts for the degradation of VOCs under visible light is a challenge. CdS@g-C3N4 heterojunction photocatalytic materials were developed in this study using a microwave-assisted sol-gel process. CdS@g-C3N4(0.2) photocatalyzed the maximum degradation of gaseous toluene under visible light irradiation, and the time required to achieve the same degradation rate was reduced by 270 min when compared to pure CdS. The morphological characterization, photoelectric property analysis, and DFT calculations all verified that the CdS nanoparticles were uniformly disseminated on the surface of g-C3N4, and that the interfaces were closely contacted to form a heterojunction interface with a built-in field. This enhances charge transfer from CdS to g-C3N4 while successfully decreasing electron-hole pair recombination caused by light. Furthermore, the energy band structure was altered to absorb longer wavelengths of light and extend the absorption spectral range, improving the photocatalytic material's efficacy for broad-spectrum light such as sunshine. This paper proposes methods for predicting and optimizing the surface structure of catalysts, as well as developing high-performance multi-heterojunction photocatalysts for the degradation of indoor VOCs.

Authenticating the geographic origins of Atractylodes lancea rhizome chemotypes in China through metabolite marker identification

Introduction

Atractylodes lancea is widely distributed in East Asia, ranging from Amur to south-central China. The rhizome of A. lancea is commonly used in traditional Chinese medicine, however, the quality of products varies across different regions with different geochemical characteristics.

Method

This study aimed to identify the chemotypes of A. lancea from different areas and screen for chemical markers by quantifying volatile organic compounds (VOCs) using a targeted metabolomics approach based on GC-MS/MS.

Results

The A. lancea distributed in Hubei, Anhui, Shaanxi, and a region west of Henan province was classified as the Hubei Chemotype (HBA). HBA is characterized by high content of β-eudesmol and hinesol with lower levels of atractylodin and atractylon. In contrast, the Maoshan Chemotype (MA) from Jiangsu, Shandong, Shanxi, Hebei, Inner Mongolia, and other northern regions, exhibited high levels of atractylodin and atractylon. A total of 15 categories of VOCs metabolites were detected and identified, revealing significant differences in the profiles of terpenoid, heterocyclic compound, ester, and ketone among different areas. Multivariate statistics indicated that 6 compounds and 455 metabolites could serve as candidate markers for differentiating A. lancea obtained from the southern, northern, and Maoshan areas.

Discussion

This comprehensive analysis provides a chemical fingerprint of selected A. lancea. Our results highlight the potential of metabolite profiling combined with chemometrics for authenticating the geographical origin of A. lancea.

Chemical sensors for imaging total cellular aliphatic aldehydes in live cells

Aliphatic aldehydes are reactive electrophilic carbonyls that cross-link with DNA and proteins leading to cellular toxicity and disease pathogenesis. This toxicity is due to the cooperative effect of multiple aldehydes via a common mechanism. Therefore, live-cell imaging of total aliphatic aldehydes, small-to-long chain (C1-C10), is highly desired to decipher their physiological and pathological functions. However, sensors for imaging total cellular aliphatic aldehydes are currently lacking despite their high concentrations (∼80 to >500 μM) inside cells. Herein, we report chemical sensors that generate a benzimidazole moiety upon reaction with aliphatic aldehydes of different chain lengths (C1-C10), resulting in turn-on fluorescence. These sensors exhibit high quantum yields, high dynamic range, and enable the quantification of changes in both the exogenous administration of aldehydes and endogenous real-time formation of aliphatic aldehydes in live mammalian cells. This tool has great potential to transform aldehyde research by illuminating cellular metabolites that have remained elusive in living systems.

Efficient deactivation of aerosolized pathogens using a dielectric barrier discharge based cold-plasma detergent in environment device for good indoor air quality

Air pollution is one of the top 5 risks causing chronic diseases according to WHO and airborne transmitted pathogens infection is a huge challenge in the current era. Long living pathogens and small size aerosols are not effectively dealt with by the available indoor air purifiers. In this work, a dielectric barrier discharge (DBD) based portable cold-plasma detergent in environment device is reported and its disinfection efficiency has been analyzed in the indoor environment of sizes up to 3 × 2.4 × 2.4 m³. The deactivation efficiency of total microbial counts (TMCs) and total fungal counts (TFCs) is found to be more than 99% in 90 min of continuous operation of the device at the optimized parameters. The complete inactivation of MS2 phage and Escherichia coli bacteria with more than 5 log reduction (99.999%) has also been achieved in 30 min and 90 min of operation of the device in an enclosed environment. The device is able to produce negative ions predominantly dominated by natural plasma detergent along with positive ions in the environment similar to mother nature. The device comprises a coaxial DBD geometry plasma source with a specially designed wire mesh electrode of mild steel with a thickness of 1 mm. The need for feed gas, pellets and/or differential pressure has been eliminated from the DBD discharge source for efficient air purification. The existence of negative ions for more than 25 s on average is the key advantage, which can also deactivate long living pathogens and small size aerosols.

Crosscutting of the pollutants and building ventilation systems: a literature review

Considering the time spent in enclosed environments, it is essential to study the relationship between pollutants and building ventilation systems to find whether the types and levels of pollutants and greenhouse gasses, which are expected to be exhaled through ventilation systems into the atmosphere, have been adequately evaluated. We propose the hypothesis that the exhaled air from residential buildings contains pollutants that may become another source of contamination affecting urban air quality and potentially contributing to climate drivers. Thus, the main goal of this article is to present a cross-review of the identification of pollutants expected to be exhaled through ventilation systems in residential buildings. This approach has created the concept of "exhalation of buildings" a new concept enclosed within the research project in which this article is included. We analyze the studies related to the most significant pollutants found in buildings and the studies about the relation of buildings' ventilation systems with such pollutants. Our results show that, on the one hand, the increase in the use of mechanical ventilation systems in residential buildings has been demonstrated to enhance the ventilation rate and generally improve the indoor air quality conditions. But no knowledge could be extracted about the corresponding environmental cost of this improvement, as no systematic data were found about the total mass of contaminants exhaled by those ventilation systems. At the same time, no projects were found that showed a quantitative study on exhalation from buildings, contrary to the existence of studies on pollutants in indoor air.

Photocatalytic degradation of gaseous pollutants on nanostructured TiO2 films of various thickness and surface area

This work deals with the preparation of TiO₂ nanoparticulate layers of various mass (0.05 mg/cm² to 2 mg/cm²) from three commercial nanopowder materials, P90, P25 and CG 300, their characterisation (profilometry, BET and SEM) and evaluation of their photocatalytic activity in the gaseous phase in a flow-through photoreactor according to the ISO standard (ISO 22197-2). Hexane was chosen as a single model pollutant and a mixture of four compounds, namely acetaldehyde, acetone, heptane and toluene was used for the evaluation of the efficiency of simultaneous removal of several pollutants. A linear dependence between the layer mass and the layer thickness for all materials was found. Up to a layer mass 0.5 mg/cm², the immobilisation P90 and P25 powder did not result in a decrease in BET surface area, whereas with an increase in layer mass to 1 mg/cm², a decrease of the BET surface was observed, being more significant in the case of P90. The photocatalytic conversion of hexane was comparable for all immobilised powders up to a layer mass of 0.5 mg/cm². For higher layer mass, the photocatalytic conversion of hexane on P25 and P90 differ; the latter achieved about 30% higher conversion. In the case of the simultaneous degradation of four compounds, acetaldehyde was degraded best, followed by acetone and toluene; the least degraded compound was heptane. The measurement of released CO₂ revealed that 90% of degraded hexane was mineralised to CO₂ and water while for a mixture of 4 VOCs, the level of mineralisation was 83%.

Semi-solid electrolyte with layered heterometallic low-valent electron-mediator enabling indirect destruction of gaseous toluene

The electrochemical degradation of air pollutants, particularly volatile organic compounds (VOCs), at their gaseous state is a promising method. However, it remains at an infant stage due to sluggish solid-gas electron transfers at room temperature. We established a triphase reaction condition using a semi-solid electrolyte layer between the electrode and membrane to enhance the electron transfer at room temperature. A polyvinyl alcohol (PVA) gel layer was inserted between a bimetallic layered CuNi(CN)₄ complex coated Cu foam electrode (TCNi-Cu) and Nafion 324 membrane for the degradation of gaseous toluene. The cyclic voltammetry of TCNi-Cu using a sodium hydroxide-coated copper mesh electrode at a triphase showed Cu¹⁺ and Ni¹⁺ stabilization at -0.7 and -0.9 V, respectively, which was similar to the liquid phase electron transfer behavior. The degradation capacity of gaseous toluene without using electrogenerated TCNi-Cu + PVA gel was 0.54 mg cm² min^-1, whereas that of TCNi-Cu + PVA gel layers was 1.17 mg cm^-2min^-1, which revealed the mediation effect at a triphase condition. Toluene was converted into oxygen-containing products, such as butanol, propanol, and acetone (without reduction products), which revealed that indirect oxidation occurred at the cathode using an in-situ generated oxidant, such as OH˙ radical. As an electron-mediator, Cu¹⁺ was used to form oxidants for the degradation of toluene at -0.7 V. The toluene removal rate reached 1.4 μmol h^-1, with an energy efficiency of 0.15 Wh L^-1. This study is the first attempt to describe a liquid-electrolyte-free cathodic half-cell in electrochemical application to VOCs degradation, highlighting the electron transfer at room temperature.

An overview on recent progress in photocatalytic air purification: Metal-based and metal-free photocatalysis

Air pollution is becoming a distinctly growing concern and the most pressing universal problem as a result of increased energy consumption, with the multiplication of the human population and industrial enterprises, resulting in the generation of hazardous pollutants. Among these, carbon monoxide, nitrogen oxides, Volatile organic compounds, Semi volatile organic compounds, and other inorganic gases not only have an adverse impact on human health both outdoors and indoors, but have also substantially altered the global climate, resulting in several calamities around the world. Thus, the purification of air is a crucial matter to deal with. Photocatalytic oxidation is one of the most recent and promising technologies, and it has been the subject of numerous studies over the past two decades. Hence, the photocatalyst is the most reassuring aspirant due to its adequate bandgap and exquisite stability. The process of photocatalysis has provided many benefits to the atmosphere by removing pollutants. In this review, our work focuses on four main themes. Firstly, we briefly elaborated on the general mechanism of air pollutant degradation, followed by an overview of the typical TiO₂ photocatalyst, which is the most researched photocatalyst for photocatalytic destruction of gaseous VOCs. The influence of operating parameters influencing the process of photocatalytic oxidation (such as mass transfer, light source and intensity, pollutant concentration, and relative humidity) was then summarized. Afterwards, the progress and drawbacks of some typical photoreactors (including monolithic reactors, microreactors, optical fiber reactors, and packed bed reactors) were described and differentiated. Lastly, the most noteworthy coverage is dedicated to different types of modification strategies aimed at ameliorating the performance of photocatalysts for degradation of air pollutants, which were proposed and addressed. In addition, the review winds up with a brief deliberation for more exploration into air purification photocatalysis.

Interactions of limonene and carvone on titanium dioxide surfaces

Limonene, a monoterpene, found in cleaning products and air fresheners can interact with a variety of surfaces in indoor environments. An oxidation product of limonene, carvone, has been reported to cause contact allergens. In this study, we have investigated the interactions of limonene and carvone with TiO₂, a component of paint and self-cleaning surfaces, at 297 ± 1 K with FTIR spectroscopy and force field-based molecular dynamics and ab initio simulations. The IR absorption spectra and computational methods show that limonene forms π-hydrogen bonds with the surface O-H groups on the TiO₂ surface and that carvone adsorbs on the TiO₂ surface through a variety of molecular interactions including through carbonyl oxygen atoms with Ti⁴⁺ surface atoms, O-H hydrogen bonding (carbonyl O⋯HO) and π-hydrogen bonds with surface O-H groups. Furthermore, we investigated the effects of relative humidity (RH) on the adsorption of limonene and carvone on the TiO₂ surface. The spectroscopic results show that the adsorbed limonene can be completely displaced by water at a relative humidity of ca. 50% RH (∼2 MLs of water) and that 25% of carvone is displaced at ca. 67% RH, which agrees with the calculated free energies of adsorption which show carvone more strongly adsorbs on the surface relative to limonene and thus would be harder to displace from the surface. Overall, this study shows how a monoterpene and its oxidation product interact with TiO₂ and the impact of relative humidity on these interactions.

First-Principles Insight into a B4C3 Monolayer as a Promising Biosensor for Exhaled Breath Analysis

Nanomaterial-based room temperature gas sensors are used as a screening tool for diagnosing various diseases through breath analysis. The stable planar structure of boron carbide (B₄C₃) is utilized as a base material for adsorption of human breath exhaled VOCs, namely formaldehyde, methanol, acetone, toluene along, with interfering gases of carbon dioxide and water. The adsorption energy, charge density, density of states, energy band gap variation, recovery time, sensitivity, and work function of adsorbed molecules on pristine B₄C₃ are analyzed by density functional theory. The computed adsorption energies of VOC are in the range of - 0.176 to - 0.238 eV, and a larger interaction distance validate the physisorption behavior of these VOCs biomarkers on pristine boron carbide monolayer. Minute changes are determined from the electronic band structure of all adsorbed systems conserving the semiconducting nature of the B₄C₃ monolayer. The band gap variation upon adsorption of VOCs and interfering gases is examined between 0.05 and 0.52%. The 13.63 × 10^-9 s recovery time of methanol is slower among VOCs, and 0.556 × 10^-9 s of carbon dioxide (CO₂) is faster for desorption. The results reveal that boron carbide can be utilized as a biosensor at room temperature for the analysis of exhaled VOCs from human breath.

Volatile organic compounds: A proinflammatory activator in autoimmune diseases

The etiopathogenesis of inflammatory and autoimmune diseases, including pulmonary disease, atherosclerosis, and rheumatoid arthritis, has been linked to human exposure to volatile organic compounds (VOC) present in the environment. Chronic inflammation due to immune breakdown and malfunctioning of the immune system has been projected to play a major role in the initiation and progression of autoimmune disorders. Macrophages, major phagocytes involved in the regulation of chronic inflammation, are a major target of VOC. Excessive and prolonged activation of immune cells (T and B lymphocytes) and overexpression of the master pro-inflammatory constituents [cytokine and tumor necrosis factor-alpha, together with other mediators (interleukin-6, interleukin-1, and interferon-gamma)] have been shown to play a central role in the pathogenesis of autoimmune inflammatory responses. The function and efficiency of the immune system resulting in immunostimulation and immunosuppression are a result of exogenous and endogenous factors. An autoimmune disorder is a by-product of the overproduction of these inflammatory mediators. Additionally, an excess of these toxicants helps in promoting autoimmunity through alterations in DNA methylation in CD4 T cells. The purpose of this review is to shed light on the possible role of VOC exposure in the onset and progression of autoimmune diseases.

Purification of Ambient Air by Novel Green Plant with Titanium Dioxide Nanoparticles

Background:

Indoor air pollution is an important environmental health problem. Nanotechnology is one of the most important methods to reduce the indoor air pollution. Titanium dioxide (TiO₂) is generally accepted as one of the most effective photoinduced catalysts. It is frequently used to oxidize organic and inorganic compounds in the air due to its strong oxidative ability and long-term photostability. The aim of this study was to determine the effectiveness of nanotechnology in the purification of ambient air by using Saudi myrtle plants treated with TiO₂.

Methods:

Experiments were conducted in two academic departments of the laboratories at the Public Sector University. Concentration of formaldehyde, nitrogen dioxide (NO₂), sulphur dioxide (SO₂) and other toxic gases was measured in the environment of the laboratories. Myrtus plant was growing in the growth media which contained TiO₂. After 8 hours of exposure of the plant, concentration of NO₂, SO₂ and other toxic pollutant gases in the air was measured. The total duration of the experiment was 4 days.

Results:

It was found that the levels of formaldehyde, volatile organic compounds (VOCs) and other pollutants were significantly reduced the concentration from 10% to 98% in the air. After intervention, air containing the concentration of formaldehyde, TVOCs, NO₂ SO₂ and carbon monoxide (CO) on the fourth day reduced from 0.251, 401, 0.032, 0.009 and 0.99 to 0.014, 54,0.0003, 0.003 and 0.01 after exposure of Myrtus plant to ambient air.

Conclusions:

Significant reduction of air pollutants in the air after application of TiO₂ in the green plant (Myrtus communis). It is a novel approach and economically feasible for purification of indoor air.

Nanostructured Coatings: Review on Processing Techniques, Corrosion Behaviour and Tribological Performance

Corrosion and tribology are surface phenomena. Modifying surfaces of materials without resorting to altering their bulk properties is an effective route to alleviate corrosion, friction and wear, encountered in engineering applications. With the advancements in the field of nanotechnology, surface protective coatings with nanomaterials can be readily developed to explore their functionality in mitigating chemical/physical damage of surfaces. Surface protection enhances performance and operating lifetimes of industrial machinery components. This review presents insights on various types of recently developed nanostructured coatings, their synthesis routes, corrosion behaviour and tribological performance. It provides the state-of-the-art information on the development of nanostructured coatings, namely, ceramic coatings, metallic coatings and nanocomposite coatings with metal and polymer matrices. Biomimetic approaches in making nanostructured coatings and challenges encountered in the development of nanostructured coatings are highlighted.

Oxidation of Toluene by Ozone over Surface-Modified γ-Al2O3: Effect of Ag Addition

In this study, the ability of ozone to oxidise toluene present in low levels into CO and CO2 was studied. The catalytic ozonation of toluene was carried out in a micro-fixed bed reactor. The oxidation was done in two steps: toluene adsorption on the catalyst followed by sequential ozone desorption. Toluene breakdown by ozone at low temperature and atmospheric pressure was achieved using γ-Al2O3 supported transition metal oxides impregnated with a reduced noble metal. The catalyst Ag–CoOx/γ-Al2O3 efficiently oxidised and transformed toluene into products (52.4% COx yield). This catalyst has a high surface area, more acidic sites, and lattice oxygens for better toluene oxidation. The addition of Ag to the CoOx/γ-Al2O3 catalyst surface improved toluene adsorption on the catalyst surface, resulting in improved product yield, selectivity, and carbon balance.

Recent progress on studies of airborne infectious disease transmission, air quality, and thermal comfort in the airliner cabin air environment

Airborne transmission of infectious diseases through air travel has become a major concern, especially during the COVID-19 pandemic. The flying public and crew members have long demanded better air quality and thermal comfort in commercial airliner cabins. This paper reviewed studies related to the airliner cabin air environment that have been published in scientific journals since 2000, to understand the state-of-the-art in cabin air environment design and the efforts made to improve this environment. In this critical review, this paper discusses the challenges and opportunities in studying the cabin air environment. The literature review concluded that current environmental control systems for airliner cabins have done little to stop the airborne transmission of infectious diseases. There were no reports of significant air quality problems in cabins, although passengers and crew members have complained of some health-related issues. The air temperature in cabins needs to be better controlled, and therefore, better thermal comfort models for airliners should be developed. Low humidity is a major complaint from passengers and crew members. Gaspers are used by passengers to adjust thermal comfort, but they do not improve air quality. Various personalized and displacement ventilation systems have been developed to improve air quality and thermal comfort. Air cleaning technologies need to be further developed. Good tools are available for designing a better cabin air environment.

Exploring the photocatalytic conversion mechanism of gaseous formaldehyde degradation on TiO2-x-OV surface

To understand the conversion mechanism of photocatalytic gaseous formaldehyde (HCHO) degradation, strontium (Sr)-doped TiO_2-x-OV catalysts was designed and synthesized in this study, with comparable HCHO removal performance. Our results proved that foreign-element doping reduced Ti⁴⁺ to the lower oxidation state Ti^{(4- x)+}, and that the internal charge kinetics was largely facilitated by the unbalanced electron distribution. Oxygen vacancies (OVs) were developed spontaneously to realize an electron-localized phenomenon in TiO_2-x-OV, thereby boosting O₂ adsorption and activation for the enhanced generation of reactive oxygen species (ROS). At the chemisorption stage, in-situ DRIFTS spectra and density functional theory calculation results revealed that surface adsorbed O₂ (O_ads) and lattice O (O_lat) engaged in the isomerisation of HCHO to dioxymethylene (DOM) on TiO_2-x-OV and TiO₂, respectively. Time-resolved DRIFTS spectra under light irradiation revealed that the DOM was then converted to formate and thoroughly oxidized to CO₂ and H₂O in TiO_2-x-OV. While bicarbonate byproducts were detected from DOM hydroxylation or possible side conversion of CO₂ in TiO₂, owing to insufficient consumption of surface hydroxyl. Our study enhances the understanding on the photocatalytic oxidation of HCHO, thereby promoting the practical application in indoor air purification.

Feminine Hygiene Products and Volatile Organic Compounds in Reproductive-Aged Women Across the Menstrual Cycle: A Longitudinal Pilot Study

Background: Volatile organic compounds (VOCs) have been detected in feminine hygiene products (FHPs), especially in tampons and sanitary pads. However, little is known about whether menstrual products can contribute to VOC exposure in women. Our objectives were to: (1) examine the variations of urinary VOC concentrations during menstrual cycles; (2) evaluate the relationships between the use of menstrual products and urinary VOC concentrations; and (3) link urinary VOC concentrations to those measured in menstrual products. Methods: We measured urinary concentrations of 98 target VOCs in 25 reproductive-aged women with 100 repeated measures collected between October 2018 and February 2019. First-morning-void urine samples were collected four times for each woman during one menstrual cycle. Urinary VOC concentrations were measured using gas chromatography-mass spectroscopy. Results: Of 98 target VOCs measured in the urine samples, 36 VOCs were detected. We did not see statistically significant variations in VOC concentrations across the menstrual cycle. After multivariable adjustment, tampon users had significantly higher concentrations of 2-butanone (β = 1.58 log ng/g, 95% confidence interval [CI]: 0.16-3.00, p = 0.03) and methyl isobutyl ketone (β = 0.63 log ng/g, 95% CI: 0.03-1.22, p = 0.04), compared with pad users. Higher n-nonane, benzene, and toluene estimated from menstrual products were associated with higher urinary concentrations in women. Conclusion: The use of FHPs during menses might be a potential source of VOCs. A larger cohort study is warranted to confirm our results and evaluate clinical implications.

Low Temperature Catalytic Oxidation of Ethanol Using Ozone over Manganese Oxide-Based Catalysts in Powdered and Monolithic Forms

Catalytic oxidation of low concentrations of ethanol was investigated in dry and humid air streams at low temperature (60 °C) over manganese oxide-based catalysts supported on a meso–macrostructured TiO2 using ozone as the oxidant. Ethanol was selected as a representative model VOC present in indoor air, and its concentration was fixed to 10 ppm. For that purpose, a series of Mn/TiO2 powder and monolithic catalysts was prepared, some doped with 0.5 wt% Pd. Whatever the catalyst, the presence of water vapor in the gas phase had a beneficial effect on the conversion of ethanol and ozone. The Pd–Mn/TiO2 catalyst containing 0.5 wt% Pd and 5 wt% Mn exhibited superior oxidation efficiency to the Mn/TiO2 counterparts by increasing ozone decomposition (77%) while simultaneously increasing the selectivity to CO2 (85%). The selectivity to CO2 approached nearly 100% by increasing the amount of catalyst from 20 to 80 mg. In a further step, alumina wash-coated cordierite honeycomb monoliths were coated with the 0.5Pd–5Mn/TiO2 catalyst. Full conversion of ethanol to CO2 without residual O3 emitted (less than 10 ppb) could be attained, thereby demonstrating that the proposed Pd–Mn/TiO2 monolithic catalyst fulfills the specifications required for onboard systems.

Do financial development, FDI, and globalization intensify environmental degradation through the channel of energy consumption: evidence from belt and road countries

This study explores the role of foreign direct investment (FDI), financial development (FD), and globalization (GLO) in environmental degradation (ED) through the channel of energy consumption (EC) for the selected panel of belt and road initiative (BRI) countries for 1990-2017. The study applies appropriate panel unit root tests, the Westerlund cointegration test, the dynamic seemingly unrelated regression (DSUR) long-run panel estimation approach, and the Dumitrescu-Hurlin panel causality test. Results of panel unit root test ascertain variables are interred either at a level or after first difference and long-run association documents by implementing conventional and error correction. Study findings with DSUR, in the long run, reveal that energy consumption and economic growth expose positive statistically significant association with environmental degradation, implying intensity in energy consumption and aggregate output level shall augment the present state of environmental degradation. While negative statistically significant effects reveal running from FDI, financial development, and globalization to environmental degradation, implying that energy efficiency technology, the scope of green financing through financial development, and cross country effects help the economy reduce environmental consequences with lesser carbon emission. Results of directional causality unveiled feedback hypothesis available in explaining the causality between environmental degradation and energy consumption [ED←➔EC] and FDI and environmental degradation [FDI←➔ED], moreover, unidirectional effects running from financial development, globalization, and economic growth to environmental degradation, i.e., [FD➔ED; GLO➔ED; Y➔ED]. The finding reveals the need to formulate energy policies that promote belt and road (BR) country energy efficiency.

Oxygen Isotope Tracing Study to Directly Reveal the Role of O2 and H2O in the Photocatalytic Oxidation Mechanism of Gaseous Monoaromatics

O₂ and H₂O influence the photocatalytic oxidation mechanism of gaseous monoaromatics, but still in an unclear manner, due to the lack of direct evidence. Tracing an oxygen atom from ¹⁶O₂ and H₂¹⁸O to intermediates can clarify their roles. The low H₂¹⁸O content suppressed the formation of benzenedicarboxaldehydes during the oxidation of xylenes and ¹⁶O₂ greatly affected the yield of total intermediates, while neither of them altered the percentage order of the products. Methylbenzaldehydes, methylbenzyl alcohols, and benzenedicarboxaldehydes possessed greater ¹⁶O percentage (≥69.49%), while higher ¹⁸O distribution was observed in methylbenzoic acids and phthalide (≥59.51%). Together with the interconversion results of the products revealed, ¹⁶O₂ determined the transformation of xylenes initially to methylbenzaldehydes and then to methylbenzyl alcohols or benzenedicarboxaldehydes, while H₂¹⁸O mainly contributed to conversion of methylbenzaldehydes to methylbenzoic acids or phthalide. Further interaction sites of xylene and its products with H₂O and O₂ were confirmed by molecular dynamics calculations. The same roles of ¹⁶O₂ and H₂¹⁸O in the degradation of toluene, ethylbenzene, 1,2,4-trimethylbenzene, and 1,3,5-trimethylbenzene were also verified. This is the first report that provides direct evidence for the roles of O₂ and H₂O in the photocatalytic oxidation mechanism of gaseous monoaromatics. These findings are helpful to achieve controllable product formation from the oxidation of monoaromatics and predict their migration process in the atmospheric environment.

Volatile Organic Compounds (VOCs) as Environmental Pollutants: Occurrence and Mitigation Using Nanomaterials

Volatile organic compounds (VOCs) comprise various organic chemicals which are released as gases from different liquids or solids. The nature and impact of the health effects are dependent on the VOCs concentrations and, also, on the exposure time. VOCs are present in different household, industrial or commercial and products, but their accumulation in air and water has primarily gained attention. Among VOCs, trichloroethylene and vinyl chloride are the most toxic and carcinogenic compounds. In order to improve the indoor air and water quality, VOCs can be removed via efficient approaches involving nanomaterials, by using techniques such as adsorption, catalysis or photocatalysis. In the recent years, the development of manufacturing procedures, characterization techniques and testing processes has resulted in the growth of na-nomaterials obtaining and applications, creating great possibilities and also a tremendous prov-ocation in applying them for highly efficient VOCs removal. This review is intended to contrib-ute to the improvement of awareness and knowledge on the great potential that nanomaterials have in VOCs removal, in order a to improve indoor and outdoor environment, but also the worldwide water sources.

Photocatalytic Air Purification Using Functional Polymeric Carbon Nitrides

The techniques for the production of the environment have received attention because of the increasing air pollution, which results in a negative impact on the living environment of mankind. Over the decades, burgeoning interest in polymeric carbon nitride (PCN) based photocatalysts for heterogeneous catalysis of air pollutants has been witnessed, which is improved by harvesting visible light, layered/defective structures, functional groups, suitable/adjustable band positions, and existing Lewis basic sites. PCN-based photocatalytic air purification can reduce the negative impacts of the emission of air pollutants and convert the undesirable and harmful materials into value-added or nontoxic, or low-toxic chemicals. However, based on previous reports, the systematic summary and analysis of PCN-based photocatalysts in the catalytic elimination of air pollutants have not been reported. The research progress of functional PCN-based composite materials as photocatalysts for the removal of air pollutants is reviewed here. The working mechanisms of each enhancement modification are elucidated and discussed on structures (nanostructure, molecular structue, and composite) regarding their effects on light-absorption/utilization, reactant adsorption, intermediate/product desorption, charge kinetics, and reactive oxygen species production. Perspectives related to further challenges and directions as well as design strategies of PCN-based photocatalysts in the heterogeneous catalysis of air pollutants are also provided.

Comparative studies on the VOC sorption performances over hierarchical and conventional ZSM-5 zeolites

The sorption behaviors of hexane, toluene and mesitylene as probe volatile organic compounds (VOCs) over hierarchical and conventional zeolite ZSM-5 were investigated by a series of experiments, such as dynamic adsorption, temperature-programmed desorption and cycle adsorption tests. The results showed that hierarchical ZSM-5 exhibited better adsorption capacity for toluene and mesitylene, better diffusion of VOCs and superior cycle adsorption efficiency. As we believe, these findings will offer valuable information for the development of zeolite based adsorbents for VOC elimination or recycling.

Analysis and health risk assessment of phthalate esters (PAEs) in indoor dust of preschool and elementary school centers in city of Tehran, Iran

Individuals spend a lot of time indoors; thus they are generally exposed to phthalates used in consumer products. Therefore, those exposed to phthalates as indoor contaminants are at high risks. The present study was conducted to evaluate the carcinogenic and non-carcinogenic hazard of phthalate esters (PAEs), like dimethyl phthalate, diethyl phthalate, di(nbutyl) phthalate, butyl benzyl phthalate, dioctyl phthalate, and di(2-ethylhexyl) phthalate in the dust obtained from 21 schools in Tehran, in 2019. A total of 63 indoor dust specimens were obtained by a vacuum cleaner. After transferring dust samples to the laboratory, 100 mg of each sample was centrifuged and mixed with 20 ml acetone and kept through a night and ultrasonicated within 30 min. Eventually, PAEs' contents were measured via gas chromatography-mass spectrometry. Based on the findings, median concentrations of DMP, DEP, DnBP, BBP, DEHP, and DnOP were 0.90, 0.10, 6.0, 0.20, 118.30, and 4.10 mg kg^-1 respectively. Moreover, the overall average daily exposure doses (ADD) of phthalate esters via dust ingestion, skin contact, and inhalation were 1.56E-03, 1.70E-06, and 1.56E-07 mg kg^-1 day^-1, respectively, and the lifetime average daily exposure doses (LADD) were 1.83E-04, 2.34E-08, and 2.46E-08 mg kg^-1 day^-1, respectively; thus ingestion of dust particles was found to be the main pathway of exposure to phthalate for non-carcinogenic and carcinogenic risks. Although based on the results, the studied samples were below the US Environmental Protection Agency threshold of 1.00E-06, due to the disadvantages of phthalates in human safety, these kinds of investigations are helpful in understanding the main ways of exposure to PAEs and providing a science-based framework for the future attempts for mitigating the PAEs indoor emissions.

Ambient Air Purification by Nanotechnologies: From Theory to Application

Air pollution has been a recurring problem in northern Chinese cities, and high concentrations of PM2.5 in winter have been a particular cause for concern. Secondary aerosols converted from precursor gases (i.e., nitrogen oxides and volatile organic compounds) evidently account for a large fraction of the PM2.5. Conventional control methods, such as dust removal, desulfurization, and denitrification, help reduce emissions from stationary combustion sources, but these measures have not led to decreases in haze events. Recent advances in nanomaterials and nanotechnology provide new opportunities for removing fine particles and gaseous pollutants from ambient air and reducing the impacts on human health. This review begins with overviews of air pollution and traditional abatement technologies, and then advances in ambient air purification by nanotechnologies, including filtration, adsorption, photocatalysis, and ambient-temperature catalysis are presented—from fundamental principles to applications. Current state-of-the-art developments in the use of nanomaterials for particle removal, gas adsorption, and catalysis are summarized, and practical applications of catalysis-based techniques for air purification by nanomaterials in indoor, semi-enclosed, and open spaces are highlighted. Finally, we propose future directions for the development of novel disinfectant nanomaterials and the construction of advanced air purification devices.

Kinetic and reaction mechanism of generated by-products in a photocatalytic oxidation reactor: Model development and validation

Photocatalytic oxidation is a promising technology to control air pollution. However, the formation of hazardous by-products hinders the commercialization application of this technology. This paper reports the development of a novel by-products predictive model considering the mass transfer of the pollutant in the gas phase and kinetic reaction in the solid phase. Two challenge compounds from ketone group (acetone and methyl ethyl ketone) were examined for model validation in a continuous Photocatalytic Oxidation (PCO) reactor with TiO₂ coated on silica fiber felts. A possible reaction pathway for degradation of each challenge compound was proposed based on identified by-products using analytical methods (GC-MS and HPLC). Formaldehyde, Acetaldehyde, Propionaldehyde, Ethanol, and acetic acid were detected as by-products of the Acetone and Methyl Ethyl Ketone in the PCO reactor. Different possible reaction rate scenarios were evaluated to find the best expression fitted to experimental data at the steady-state condition. The obtained reaction coefficients were then used to validate the model under various operating conditions, namely concentration, relative humidity, irradiation, and velocity variations. Higher concentration and irradiation, as well as lower relative humidity and velocity, resulted in more by-products generation. It was also observed that with enhancing residence time, mineralization efficiency (or CO₂ formation) and by-products generation increases through PCO reaction. The model validation provided acceptable accuracy for both steady-state and transient conditions. Finally, the Health Risk Index was used to investigate the implications of generated by-products on human health under varying operating conditions.

Air quality in cabin environment of different passenger cars: effect of car usage, fuel type and ventilation/infiltration conditions

Despite that commuters spend only 5.5% of their time in cabin vehicles, their exposure to harmful air pollutants, originated from the vehicle itself, and traffic emission is considered significant. In this study, two passenger cars with different type of fuels were investigated in terms of air quality and thermal comfort of their cabin. Investigation was performed in the city of Kozani, Northern Greece. Moreover, air samples near the exhausts were taken, in order to compare concentration of compounds found indoors. Twelve volatile organic compounds and CO₂ were measured inside the cabin when the cars were stopped, when idle and when they were cruising in medium and heavy traffic roads, under various ventilated conditions. Thermal comfort was investigated while driving the cars through the city traffic. Results showed that the air around the diesel exhaust is less affected by emissions from the engine compared to LPG fuel. This is reflected to the TVOC measured into the cabin. Results also revealed that the air quality of a diesel fuel moving car with open windows is only affected by the traffic emissions from neighbouring vehicles, while for the car with LPG fuel, the self-pollution from its own exhaust might contribute together with the outdoor air.

Catalytic Oxidation of CO and Benzene over Metal Nanoparticles Loaded on Hierarchical MFI Zeolite

In order to obtain highly active catalytic materials for oxidation of carbon monoxide and volatile organic compounds (VOCs), monometallic platinum, copper, and palladium catalysts were prepared by using of two types of ZSM-5 zeolite as supports—parent ZSM-5 and the same one treated by HF and NH₄F buffer solution. The catalyst samples, obtained by loading of platinum, palladium, and copper on ZSM-5 zeolite treated using HF and NH₄F buffer solution, were more active in the reaction of CO and benzene oxidation compared with catalyst samples containing untreated zeolite. The presence of secondary mesoporosity played a positive role in increasing the catalytic activity due to improved reactant diffusion. The only exception was the copper catalysts in the reaction of CO oxidation, in which case the catalyst, based on untreated ZSM-5 zeolite, was more active. In this specific case, the key role is played by the oxidative state of copper species loaded on the ZSM-5 zeolites.

Identification of deactivation-resistant origin of In(OH)3 for efficient and durable photodegradation of benzene, toluene and their mixtures

Aromatic hydrocarbon is a representative type of VOCs, which causes adverse effects to human health. The degradation stability of aromatic hydrocarbon is of vital importance to commercializing a photocatalyst for its practical application. The most commonly used titanium dioxide photocatalyst (P25) was deactivated rapidly in the photocatalytic VOCs degradation process. In this work, the indium hydroxide (In(OH)₃) photocatalyst was developed, which exhibited not only higher efficient activity but also ultra-stable stability for degradation of benzene, toluene and their mixtures. The origin of the activity difference between two catalysts was investigated by combined experimental and theoretical ways. Based on in situ DRIFTS and GC-MS, it was revealed that benzoic acid and carbonaceous byproducts were specifically formed and accumulated on P25, which were responsible for deactivation of photocatalyst. In contrast, as revealed by both DFT calculations and experimental results, the reaction pathway with byproducts blocking the active sites can be thermodynamically avoided on In(OH)₃. This rendered high durability to In(OH)₃ photocatalyst in degradations of aromatic pollutants. The elucidation of deactivation-resistant effect and reaction mechanism as an ideal photocatalyst for practical usage were provided.

Rare-earth single atoms decorated 2D-TiO2 nanosheets for the photodegradation of gaseous O-xylene

In this work, rare-earth single atoms (La, Er) were decorated on the surface of 2D-TiO₂ nanosheets by an impregnation-calcination strategy. The formation of rare-earth single atoms was certified by AC HAADF-STEM and XAS. TiO₂ decorated with rare-earth single atoms (La₁-TiO₂ and Er₁-TiO₂) exhibited outstanding photocatalytic activity than pure 2D-TiO₂ nanosheets (2D-TiO₂) towards gas-phase degradation of O-xylene. Compared with 2D-TiO₂, the rare-earth single atoms greatly improved the adsorption capacity of O-xylene without increasing their specific surface area. This is because rare-earth single atoms provide additional adsorption sites and reduce the adsorption energy of O-xylene. In addition, the hybrid orbital formed by the combination of rare-earth single atom and oxygen atom is beneficial to the rapid transmission and separation of photo-induced electrons, thereby improving the performance of photocatalytic degradation. In addition, in-situ DRIFTS and GC-MS were used to reveal the photocatalytic oxidation mechanism. Interestingly, the results showed that the La₁-TiO₂ and Er₁-TiO₂ samples can reduce the types of intermediates and simplify the reaction route, implying that the single atoms play an important role in the modulation and thorough mineralization of intermediate products. This work shows that the rare-earth single atom decorated 2D-TiO₂ nanosheets have great potential in photocatalytic air pollution control.

Efficient mineralization of gaseous benzyl chloride by VUV/UV photodegradation in humid air

VUV/UV photodegradation technology, which is free of catalysts or oxidants, has been regarded as an efficient method to decompose gaseous VOCs. However, the mineralization of gaseous VOCs by VUV/UV photodegradation has seldom been discussed systematically. In this work, the mineralization of benzyl chloride in humid air is comprehensively investigated and the potential contributors in the system (i.e., light wavelength, O₂ and H₂O) are discussed. As a result, more than 95.0% benzyl chloride is mineralized at 40 min in humid air with 80% relative humidity (RH) despite its initial concentrations (i.e., ranging from 4 to 20 ppm). It is found that both 185-nm VUV light and H₂O significant contribute to the efficient mineralization of benzyl chloride in humid air, while O₂ only has a limited effect to the efficient mineralization of benzyl chloride in humid air. The introduction of H₂O into the VUV/UV photodegradation can reduce the emission of ozone obviously. These findings are significant inspiration to application of the VUV/UV photodegradation technology on the treatment of gaseous VOCs in the actual air atmosphere.

Fabrication of novel Ag4Bi2O5-x towards excellent photocatalytic oxidation of gaseous toluene under visible light irradiation

In this work, a novel oxide combined with bismuth (Bi) and silver (Ag) was prepared via simple ball milling. This substance was optimized by adjusting the amount of pre-source. Preliminary characterization results confirmed the successful synthesis of Ag₄Bi₂O₅. Subsequently, gaseous toluene was selected as model compound to evaluate the photocatalytic activity of Ag₄Bi₂O₅ photocatalyst. According to the degradation results, Ag₄Bi₂O₅ performed excellent visible light-driven photocatalytic activity with high stability. For the oxidation process of gaseous compound, reactive oxygen species (ROS) were responsible for the achievement, and the formation of oxygen vacancies on Ag₄Bi₂O₅ were involved in the generation of ROS to promote the transfer of photogenerated electrons, and improving photocatalytic activity. DFT calculations revealed the theoretical band gap of Ag₄Bi₂O₅ bulk is 1.758 eV. And the work function of Ag₄Bi₂O₅ (112)ov was ca. at 4.447 eV. The material was easily fabricated and a reliable path was provided for the synthesis of new and efficient photocatalyst for the remediation of polluted indoor air.

Factors Affecting Occupants’ Satisfaction in Governmental Buildings: The Case of the Kingdom of Bahrain

Satisfaction is a very important factor in improving productivity and performance in the work environment. This study aims to investigate the levels of occupants’ satisfaction with the indoor environmental quality (IEQ) in the governmental buildings in the Kingdom of Bahrain and to investigate the impact of occupants’ demographics and building attributes (non-IEQ factors) on these levels. For these purposes, the study used a questionnaire that has 17 indoor environmental quality (IEQ) factors in addition to a group of non-IEQ factors. The questionnaire was distributed by hand or using email to 279 employees in the Bahraini governmental sector. The findings of the study revealed that occupants in the Bahraini governmental buildings are not strongly satisfied with IEQ factors, especially with sound privacy, followed by visual privacy and amount of space, and then noise levels. The findings also showed that for most IEQ factors, men are more satisfied than women are, those who work in enclosed private offices are more satisfied than those who work in open-plan offices, and those who have central air-conditioning at their workplace are more than those who have a wall-mounted air conditioner. The impact of age, nature of work, duration of working in the current building and at the current workstation, weekly working hours, and proximity to the window were also investigated. Accordingly, a group of recommendations was suggested aiming to improve the levels of occupants’ satisfaction.