Properties, performance and associated hazards of state-of-the-art durable water repellent (DWR) chemistry for textile finishing

Alternatives assessment: An analysis on progress and future needs for research and practice

Alternatives assessment is a science-policy approach to support the informed substitution of chemicals of concern in consumer products and industries, with the intent of avoiding regrettable substitution and facilitating the transition to safer, more sustainable chemicals and products. The field of alternatives assessment has grown steadily in recent decades, particularly after the publication of specific frameworks and the inclusion of substitution and alternatives assessment requirements in a number of policy contexts. Previously, 14 research and practice needs for the field were outlined across five critical areas: comparative hazard assessment, comparative exposure characterization, lifecycle considerations, decision-making and decision analysis, and professional practice. The aim of the current article is twofold: to highlight methodological advances in the growing field of alternatives assessment based on identified research and practice needs and to propose areas for future developments. We assess advances in the field based on the analysis of a broad literature review that captured 154 sources published from 2013 to 2022. The results indicate that research conducted advanced many of the needs identified, but several remain underaddressed. Although the field has clearly grown and taken root over the past decade, there are still research and practice gaps, most notably on the hazard assessment of mixtures or different forms of chemicals, the integration of lifecycle considerations, and the development of practical approaches to address trade-offs in decision-making. We propose modifications to four of the prior research and practice needs in addition to new needs, including the development of standardized hazard assessment approaches for chemical mixtures as well as better integration of equity and/or justice considerations into assessments. Integr Environ Assess Manag 2024;20:1337-1354. © 2023 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Impact of tightening environmental regulations against long-chain perfluoroalkyl acids on composition of durable water repellents containing side-chain fluorinated polymers

Tightening of environmental regulations against long-chain perfluoroalkyl acids (PFAAs) since the 2000s may have led to significant increases in the occurrence of short-chain PFAAs in the environment. Understanding the impact of the regulations on composition of durable water repellents (DWRs) is imperative to guide implementation of pragmatic actions during their use and end-of-life treatment. Substantial decreases in the frequencies of detection and concentrations of long-chain PFAAs and long-chain PFAA-precursors, and substantial increases in those of short-chain PFAAs and short-chain PFAA-precursors, have been observed in the impurities and hydrolysis products of side-chain fluorinated polymers (SCFPs). Comparison of profiles among the DWRs containing fluorinated ingredients in 2011 indicated that DWRs containing C8F17- and C10F21-SCFPs were the dominant products and accounted for 90 % of the samples, whereas DWRs containing C4F9- and C6F13-SCFPs were the dominant products and accounted for 70 % of the samples collected in 2021. Tightening of the regulations have caused decreasing applications of long-chain SCFPs and increasing use of short-chain SCFPs in DWRs containing fluorinated ingredients. The ingredients of one DWR were changed from PFAS-free alternatives to short-chain SCFPs, whereas those of another DWR were changed from short-chain SCFPs to PFAS-free alternatives. The presence of unexplained extractable organic fluorine has been observed in DWRs containing fluorinated ingredients, which may be difficult to be hydrolyzed and form known compounds. A historical series of DWRs available from before and after the tightening of regulations and a multifaceted analytical technique consisting of combustion ion chromatographic and mass spectrometric approaches combined with two extraction techniques involving ultrasonic treatment and alkaline hydrolysis revealed the impact of tightening regulations on composition of DWRs.

Removal of mixed pollutants of perfluorooctanoic acid and 2,4,6-trichlorophenol via adsorption-photocatalysis using Ga2O3-Bi4O7 combining with fluorine-doped covalent triazine framework: Role of different active species

Perfluorooctanoic acid (PFOA) and 2,4,6-trichlorophenol (2,4,6-TCP) are significant pollutants found in textile wastewater, posing severe threats to ecological environments. The construction of an adsorption-photocatalytic system enables the efficient removal of mixed pollutants by harnessing their synergistic effect, thereby overcoming the limitations of removing mixed pollutants with single water treatment technologies. Herein, fluorine-doped covalent triazine framework (F-CTF) was combined with Ga2O3-Bi4O7 heterojunction to obtain Ga2O3-Bi4O7/F-CTF (GaBi/CTF). F-CTF greatly facilitates the adsorption process and provides convenience for photocatalysis. Simultaneously, the excellent conductivity of F-CTF promoted the separation of photoinduced charge carriers in Ga2O3-Bi4O7. GaBi/CTF5 (5 is the mass percentage of F-CTF) showed excellent degradation performance, and the removal rates of PFOA and 2,4,6-TCP reached 93.0 % and 100.0 % within 90 min, respectively. Mechanistic analysis revealed that 2,4,6-TCP and PFOA were attacked by distinct active species because of the disparate characteristics. The presence of phenolic hydroxyl groups makes 2,4,6-TCP more vulnerable to superoxide radicals (·O2-) and hydroxyl radicals (·OH), whereas PFOA is oxidized by holes (h+). The coexistence of mixed pollutants with diverse characteristics enables optimal utilization of active species generated within photocatalytic system. Moreover, the good stability of GaBi/CTF5 provides a feasible solution for efficient treatment of mixed pollutants in textile wastewater.

Fluorinated Organic Polymers for Cancer Drug Delivery

In the realm of cancer therapy, the spotlight is on nanoscale pharmaceutical delivery systems, especially polymer-based nanoparticles, for their enhanced drug dissolution, extended presence in the bloodstream, and precision targeting achieved via surface engineering. Leveraging the amplified permeation and retention phenomenon, these systems concentrate therapeutic agents within tumor tissues. Nonetheless, the hurdles of systemic toxicity, biological barriers, and compatibility with living systems persist. Fluorinated polymers, distinguished by their chemical idiosyncrasies, are poised for extensive biomedical applications, notably in stabilizing drug metabolism, augmenting lipophilicity, and optimizing bioavailability. Material science heralds the advent of fluorinated polymers that, by integrating fluorine atoms, unveil a suite of drug delivery merits: the hydrophobic traits of fluorinated alkyl chains ward off lipid or protein disruption, the carbon-fluorine bond's stability extends the drug's lifecycle in the system, and a lower alkalinity coupled with a diminished ionic charge bolsters the drug's ability to traverse cellular membranes. This comprehensive review delves into the utilization of fluorinated polymers for oncological pharmacotherapy, elucidating their molecular architecture, synthetic pathways, and functional attributes, alongside an exploration of their empirical strengths and the quandaries they encounter in both experimental and clinical settings.

Non-target and target screening and risk assessment of per- and polyfluoroalkyl substances in textile wastewater and receiving river

Textile industry uses varieties of chemicals including per- and polyfluoroalkyl substances (PFAS). PFAS are known to be persistent and incompletely removed in wastewater treatment plants (WWTPs). So far, little is known about what types of PFAS are used in the textile industry and their potential risks. Here we investigated PFAS in two WWTPs and a receiving river of a textile industrial park in Guangxi, China, by using both target and non-target analyses over a two-year period. The target analysis identified 11 specific PFAS, while the non-target analysis revealed a list of 648 different PFAS, including both legacy and emerging substances. Notably, perfluorooctanoic acid (PFOA) was still the most prevalent compound detected. Of particular concern was the finding that the investigated WWTPs, which employs an A/O (Anaerobic/Aerobic) process, exhibited a poor removal efficiency for PFAS. The average removal rate was only 22.0 %, indicating that the current treatment processes are inadequate in effectively mitigating PFAS contamination. Correlation analysis further highlighted the potential for PFAS to be transported from WWTPs to the receiving river, revealing a significant and strong positive correlation between the PFAS in the WWTP effluent and those of the river. Perfluorooctanesulfonic acid (PFOS) and two emerging PFAS (DTXSID30240816 and DTXSID90240817) were identified to have high ecological risks in the receiving river. Notably, these two emerging PFAS are homologues, and their presence in WWTPs has been poorly reported. The findings highlight the wide use and persistence of PFAS in current textile WWTPs, indicating potential long term risks to the receiving environment.

Cleaner production evaluation system for textile industry: An empirical study from LCA perspectives

The contradiction between the rapid textile expansion and intensive energy consumption, highly environmental pollution calls for the adoption of cleaner production (CP). However, current evaluation system mainly targeted on CP at production stage, guidance and support on the life cycle assessment is still in its infancy. Meanwhile few studies brought the combination of water conservation and carbon reduction into considerations. This study compared the existing CP evaluation systems including guidelines for the whole industry, standards for textile industry and indicators for the dyeing and finishing sector by quantifying the differences of indicator score compositions. Comparisons analysis from six aspects suggested that all the evaluation systems had relevant indicators regarding "pollutant emissions". "Management", "process equipment and techniques" and "resource and energy consumption" have also been well concerned while "product characteristic" seemed to be overlooked at current stage. From the perspective of whole life cycle, the key of textile processing is the "printing and dyeing" (44.23 %) followed by "fabric manufacturing"(28.85 %) and setting (15.38 %). With regards to the environmental impacts, resources depletion gained the highest attention since their indicator scores reached up to 25.71 %, 18.47 % and 20.62 % for EMAS, ERG 2018 and HJ-1852006. Cleaner production awareness and social impact also played significant roles in ISO 14031:2021 and WMG. Subsequently, a set of new comprehensive CP evaluation indicator system was established, including 3 scopes and 7 goals. The newly-built indicator system incorporated with life cycle perspectives gave a powerful tool to measure the CP level in textile industry and of CP will benefit from water reuse and energy utilization with high efficiency.

The untold story of PFAS alternatives: Insights into the occurrence, ecotoxicological impacts, and removal strategies in the aquatic environment

Due to increasing regulations on the production and consumption of legacy per- and polyfluoroalkyl substances (PFAS), the global use of PFAS substitutes increased tremendously, posing serious environmental risks owing to their bioaccumulation, toxicity, and lack of removal strategies. This review summarized the spatial distribution of alternative PFAS and their ecological risks in global freshwater and marine ecosystems. Further, toxicological effects of novel PFAS in various freshwater and marine species were highlighted. Moreover, degradation mechanisms for alternative PFAS removal from aquatic environments were compared and discussed. The spatial distribution showed that 6:2 chlorinated polyfluorinated ether sulfonate (6:2 CI-PFAES, also known as F-53B) was the most dominant emerging PFAS found in freshwater. Additionally, the highest levels of PFBS and PFBA were observed in marine waters (West Pacific Ocean). Moreover, short-chain PFAS exhibited higher concentrations than long-chain congeners. The ecological risk quotients (RQs) for phytoplankton were relatively higher >1 than invertebrates, indicating a higher risk for freshwater phytoplankton species. Similarly, in marine water, the majority of PFAS substitutes exhibited negligible risk for invertebrates and fish, and posed elevated risks for phytoplanktons. Reviewed studies showed that alternative PFAS undergo bioaccumulation and cause deleterious effects such as oxidative stress, hepatoxicity, neurotoxicity, histopathological alterations, behavioral and growth abnormalities, reproductive toxicity and metabolism defects in freshwater and marine species. Regarding PFAS treatment methods, photodegradation, photocatalysis, and adsorption showed promising degradation approaches with efficiencies as high as 90%. Finally, research gaps and future perspectives for alternative PFAS toxicological implications and their removal were offered.

One pot application of a green chemistry-based finish for cotton fabric, providing hydrophobic, flame retardant, and antimicrobial properties

Fluorinated and formaldehyde-based compounds impart excellent hydrophobicity and flame-retardant properties to cotton fabrics. However, they come with various health and environmental risks. A novel hydrophobic, flame retardant, and antimicrobial finishing agent free from fluorine and formaldehyde was synthesized. The diammonium phosphate octadecyl citrate (DAPOC) was synthesized by using stearic acid (octadecanoic acid), citric acid (propane-1,2,3-tricarboxylic acid), and diammonium hydrogen phosphate. It was grafted onto the cotton fabrics by employing the conventional pad-dry-cure method. The results indicated that this newly developed finish could be chemically bonded to cotton fabrics through C-O-C covalent bonds. The contact angle of the cotton fabric finished with a 12% concentration of the finishing agent reached 151.9°. Additionally, the finished cotton fabrics displayed evident flame-retardant properties. After undergoing 20 laundering cycles, DAPOC maintained strong hydrophobic and flame-retardant characteristics, demonstrating its durability. The chemical structure of DAPOC was verified by nuclear magnetic resonance spectroscopy (1H-NMR). The thermogravimetric analysis confirmed the flame-retardant nature of the treated cotton fabric samples. Scanning electron microscopy (SEM), Energy dispersive X-ray analysis (EDX), and Fourier-transform infrared spectroscopy (FTIR) results demonstrated the successful grafting of the newly created finish onto the cotton fiber. X-ray diffraction (XRD) spectra depicted that the crystalline structure of finished cotton fabric remained mostly unaltered. Furthermore, the finished cotton fabric exhibited commendable antimicrobial properties due to the inclusion of citric acid.

Target and non-target analyses of neutral per- and polyfluoroalkyl substances from fluorochemical industries using GC-MS/MS and GC-TOF: Insights on their environmental fate

Novel and emerging per- and polyfluoroalkyl substances (PFAS) are a key issue of concern in global environmental studies. In this study, air, sediment, and wastewater samples were collected from areas in and/or surrounded by fluorochemical-related industrial facilities to characterize the contamination profiles of neutral and novel PFAS (n-PFAS) using a gas chromatograph-based target and non-target analyses. Fluorotelomer alcohols were predominant in the samples, accounting for 80 % of the n-PFAS, followed by fluorotelomer acrylates. Air samples collected proximate to the durable water repellent (DWR) facility had the highest concentration of n-PFAS, which was approximately two orders of magnitude higher than those found in others. Non-target analysis identified fluorotelomer iodides and fluorotelomer methacrylate in multiple matrices near DWR facilities, indicating significant contamination of n-PFAS. Levels of both C6- and C8-based PFAS reflected a shift in usage patterns from C8- to C6-based fluorochemicals. Matrix-dependent profiles of n-PFAS revealed that shorter-chain (e.g., C6) and longer-chain (>C8) PFAS were predominant in air and sediment, respectively, implying that air and sediment are mobile and secondary sources of PFAS. Untreated and treated industrial wastewater also contained n-PFAS and their transformation products. The findings shed light on our understanding of the multi-matrix distribution and transport of PFAS.

Toward the future of firefighter gear: Assessing fluorinated and non-fluorinated outer shells following simulated on-the-job exposures

In 2022, the occupation of firefighting was categorized as a "Group 1" carcinogen, meaning it is known to be carcinogenic to humans. The personal protective equipment that structural firefighters wear is designed to safeguard them from thermal, physical, and chemical hazards while maintaining thermo-physiological comfort. Typically, the outer layer of structural turnout gear is finished with a durable water and oil-repellent (DWR) based on per- and polyfluoroalkyl substances (PFAS) that helps limit exposure to water and hazardous liquids. The PFAS-based aqueous emulsion typically used in DWR finishes is highly persistent and can cause various health problems if absorbed into the body through ingestion, inhalation, and/or dermal absorption. In response, the U.S. Fire Service has begun using non-PFAS water repellants in firefighter turnout gear. This study aims to evaluate the performance of both traditional PFAS-based and alternative non-PFAS outer shell materials. The study involved exposing both PFAS-based and non-PFAS DWR outer shell materials in turnout composites to simulated job exposures (i.e., weathering, thermal exposure, and laundering) that artificially aged the materials. After exposures, samples were evaluated for repellency, durability, thermal protection, and surface chemistry analysis to determine any potential performance trade-offs that may exist. Non-PFAS outer shell fabrics were found not to be diesel/oil-repellent, posing a potential flammability hazard if exposed to diesel and subsequent flame on an emergency response. Both PFAS-based and non-PFAS sets of fabrics performed similarly in terms of thermal protective performance, tearing strength, and water repellency. The surface analysis suggests that both PFAS and non-PFAS chemistries can degrade and shed from fabrics during the aging process. The study indicates that firefighters should be educated and trained regarding the potential performance trade-offs, such as oil absorption and flammability concerns when transitioning to non-PFAS outer shell materials.

Non-extractable PFAS in functional textiles - characterization by complementary methods: oxidation, hydrolysis, and fluorine sum parameters

Per- and polyfluoroalkyl substances (PFAS) are widely used for durable water-repellent finishing of different fabrics and textiles such as outdoor clothing, carpets, medical textiles and more. Existing PFAS extraction techniques followed by target analysis are often insufficient for detecting widely used side-chain fluorinated polymers (SFPs) that are barely or non-extractable. SFPs are typically copolymers consisting of a non-fluorinated backbone with perfluoroalkyl side-chains to obtain desired properties. We compared the accessible analytical information and performance of complementary techniques based on oxidation (dTOP and PhotoTOP assays), hydrolysis (THP assay), standard extraction, extractable organic fluorine (EOF), and total fluorine (TF) with five functional textiles and characterized 7 further textiles only by PhotoTOP oxidation. The results show that when applied directly to textile samples, dTOP and PhotoTOP oxidation and also hydrolysis (THP) are able to capture large fractions of TF in the form of perfluoroalkyl side-chains present in the textiles while methods relying on extracts (EOF, target and non-target analysis) yield much lower fractions of TF (e.g., factor ∼25-50 lower). The conversion of large fractions of the measured TF into PFCAs or FTOHs from fluorinated side chains is in contrast to previous studies. Concentrations ranged from Collapse

Key Words Collapse

MESH Headings

• Fluorine
• Hydrolysis
• Textiles/analysis
• Fluorocarbon Polymers/analysis
• Fluorocarbon Polymers/chemistry
• Polymers
• Carboxylic Acids/analysis
• Fluorocarbons/analysis

Collapse

Grants Collapse

Affiliation(s)

Jonathan Zweigle Environmental Analytical Chemistry, Department of Geosciences, University of Tübingen, Schnarrenbergstraße 94-96, 72076 Tübingen, Germany.
Catharina Capitain Environmental Analytical Chemistry, Department of Geosciences, University of Tübingen, Schnarrenbergstraße 94-96, 72076 Tübingen, Germany.
Fabian Simon Federal Institute for Materials Research and Testing (BAM), Division 1.1 - Inorganic Trace Analysis, Richard-Willstätter-Straße 11, 12489 Berlin, Germany
Philipp Roesch Federal Institute for Materials Research and Testing (BAM), Division 4.3 - Contaminant Transfer and Environmental Technologies, Unter den Eichen 87, 12205, Berlin, Germany
Boris Bugsel Environmental Analytical Chemistry, Department of Geosciences, University of Tübingen, Schnarrenbergstraße 94-96, 72076 Tübingen, Germany.
Christian Zwiener Environmental Analytical Chemistry, Department of Geosciences, University of Tübingen, Schnarrenbergstraße 94-96, 72076 Tübingen, Germany.

Collapse

Occurrences and fates of per- and polyfluoralkyl substances in textile dyeing wastewater along full-scale treatment processes

Industrial wastewater is a substantial source of per- and polyfluoroalkyl substances (PFASs) in the environment. However, very limited information is available on the occurrences and fates of PFASs along industrial wastewater treatment processes, particularly for the textile dyeing industry where PFASs occur extensively. Herein, the occurrences and fates of 27 legacy and emerging PFASs were investigated along the processes of three full-scale textile dyeing wastewater treatment plants (WWTPs) based on UHPLC-MS/MS in combination with self-developed solid extraction protocol featuring selective enrichment for ultrasensitive analysis. The total PFASs ranged at 630-4268 ng L-1 in influents, 436-755 ng L-1 in effluents, and 91.5-1182 μg kg-1 in the resultant sludge. PFAS species distribution varied among WWTPs, with one WWTP dominated by legacy perfluorocarboxylic acids while the other two dominated by emerging PFASs. Perfluorooctane sulfonate (PFOS) was trivial in the effluents from all the three WWTPs, indicating its diminished use in textile industry. Various emerging PFASs were detected at different abundances, demonstrating their use as alternatives to legacy PFASs. Most conventional processes of the WWTPs were inefficient in removing PFASs, especially for the legacy PFASs. The microbial processes could remove the emerging PFASs to different extents, whereas commonly elevated the concentrations of legacy PFASs. Over 90% of most PFASs could be removed by reverse osmosis (RO) and was enriched into the RO concentrate accordingly. The total oxidizable precursors (TOP) assay revealed that the total concentration of PFASs was increased by 2.3-4.1 times after oxidation, accompanied by formation of terminal perfluoroalkyl acids (PFAAs) and degradation of emerging alternatives to various extents. This study is believed to shed new light on the monitoring and management of PFASs in industries.

Not so biodegradable: Polylactic acid and cellulose/plastic blend textiles lack fast biodegradation in marine waters

The resistance of plastic textiles to environmental degradation is of major concern as large portions of these materials reach the ocean. There, they persist for undefined amounts of time, possibly causing harm and toxicity to marine ecosystems. As a solution to this problem, many compostable and so-called biodegradable materials have been developed. However, to undergo rapid biodegradation, most compostable plastics require specific conditions that are achieved only in industrial settings. Thus, industrially compostable plastics might persist as pollutants under natural conditions. In this work, we tested the biodegradability in marine waters of textiles made of polylactic acid, a diffused industrially compostable plastic. The test was extended also to cellulose-based and conventional non-biodegradable oil-based plastic textiles. The analyses were complemented by bio-reactor tests for an innovative combined approach. Results show that polylactic acid, a so-called biodegradable plastic, does not degrade in the marine environment for over 428 days. This was also observed for the oil-based polypropylene and polyethylene terephthalate, including their portions in cellulose/oil-based plastic blend textiles. In contrast, natural and regenerated cellulose fibers undergo complete biodegradation within approximately 35 days. Our results indicate that polylactic acid resists marine degradation for at least a year, and suggest that oil-based plastic/cellulose blends are a poor solution to mitigate plastic pollution. The results on polylactic acid further stress that compostability does not imply environmental degradation and that appropriate disposal management is crucial also for compostable plastics. Referring to compostable plastics as biodegradable plastics is misleading as it may convey the perception of a material that degrades in the environment. Conclusively, advances in disposable textiles should consider the environmental impact during their full life cycle, and the existence of environmentally degradable disposal should not represent an alibi for perpetuating destructive throw-away behaviors.

Evaluating Neutral PFAS for Potential Dermal Absorption from the Gas Phase

Exposures to per- and polyfluoroalkyl substances (PFAS) are of increasing concern. Assessments typically focus only on ingestion and inhalation exposure due to a lack of generally accepted approaches for estimating dermal absorption. Prior work indicates limited dermal absorption of ionic PFAS, but absorption of neutral PFAS has not been examined from the liquid vehicle or from vapor. Partitioning of semivolatile organic compounds from the gas phase to the skin surface (i.e., stratum corneum) is well known, but the potential for partitioning of neutral PFAS from the gas phase to the stratum corneum has yet to be estimated. The SPARC-estimated physicochemical properties were used to calculate transdermal permeability coefficients (k_{p_g}) and dermal-to-inhalation (D/I) exposure ratios for two groups of neutral PFAS, including those on a U.S. Environmental Protection Agency PFAS list. 11 neutral PFAS gave calculated D/I ratios >5, indicating that direct transdermal absorption may be an important exposure pathway compared to inhalation. Data on consumer products or indoor air is needed for the 11 neutral PFAS, followed by possible biomonitoring to experimentally verify dermal absorption from air. Additional PFAS should be estimated by the protocol used here as they are identified in commercial products.

Organosilicon-Based Plasma Nanocoating on Crust Leather for Water-Repellent Footwear

In this study, functional nanocoatings for water-repellent footwear leather materials were investigated by chemical plasma polymerisation by implanting and depositing the organosilicon compound hexamethyldisiloxane (HMDSO) using a low-pressure plasma system. To this end, the effect of monomers on leather plasma deposition time was evaluated and both the resulting plasma polymers and the deposited leather samples were characterised using different experimental techniques, such as: Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). In addition, leather samples were tested by standard tests for color change, water resistance, surface wetting resistance and dynamic water contact angle (DWCA). The resulting polysiloxane polymers exhibited hydrophobic properties on leather. Furthermore, these chemical surface modifications created on the substrate can produce water repellent effects without altering the visual leather appearance and physical properties. Both plasma coating treatments and nanocoatings with developed water-repellency properties can be considered as a more sustainable, automated and less polluting alternative to chemical conventional processing that can be introduced into product-finishing processes in the footwear industry.

Per- and Polyfluoroalkyl Substances in North American School Uniforms

We analyzed 72 children's textile products marketed as stain-resistant from US and Canadian stores, particularly school uniforms, to assess if clothing represents a significant route of exposure to per- and polyfluoroalkyl substances (PFAS). Products were first screened for total fluorine (total F) using particle-induced γ-ray emission (PIGE) spectroscopy (n = 72), followed by targeted analysis of 49 neutral and ionic PFAS (n = 57). PFAS were detected in all products from both markets, with the most abundant compound being 6:2 fluorotelomer alcohol (6:2 FTOH). Total targeted PFAS concentrations for all products collected from both countries ranged from 0.250 to 153 000 ng/g with a median of 117 ng/g (0.0281-38 100 μg/m², median: 24.0 μg/m²). Total targeted PFAS levels in school uniforms were significantly higher than in other items such as bibs, hats, stroller covers, and swimsuits, but comparable to outdoor wear. Higher total targeted PFAS concentrations were found in school uniforms made of 100% cotton than synthetic blends. Perfluoroalkyl acids (PFAAs) precursors were abundant in school uniforms based on the results of hydrolysis and total oxidizable precursor assay. The estimated median potential children's exposure to PFAS via dermal exposure through school uniforms was 1.03 ng/kg bw/day. Substance flow analysis estimated that ∼3 tonnes/year (ranging from 0.05 to 33 tonnes/year) of PFAS are used in US children's uniforms, mostly of polymeric PFAS but with ∼0.1 tonne/year of mobile, nonpolymeric PFAS.

Hemocompatibility challenge of membrane oxygenator for artificial lung technology

The artificial lung (AL) technology is one of the membrane-based artificial organs that partly augments lung functions, i.e. blood oxygenation and CO₂ removal. It is generally employed as an extracorporeal membrane oxygenation (ECMO) device to treat acute and chronic lung-failure patients, and the recent outbreak of the COVID-19 pandemic has re-emphasized the importance of this technology. The principal component in AL is the polymeric membrane oxygenator that facilitates the O₂/CO₂ exchange with the blood. Despite the considerable improvement in anti-thrombogenic biomaterials in other applications (e.g., stents), AL research has not advanced at the same rate. This is partly because AL research requires interdisciplinary knowledge in biomaterials and membrane technology. Some of the promising biomaterials with reasonable hemocompatibility - such as emerging fluoropolymers of extremely low surface energy - must first be fabricated into membranes to exhibit effective gas exchange performance. As AL membranes must also demonstrate high hemocompatibility in tandem, it is essential to test the membranes using in-vitro hemocompatibility experiments before in-vivo test. Hence, it is vital to have a reliable in-vitro experimental protocol that can be reasonably correlated with the in-vivo results. However, current in-vitro AL studies are unsystematic to allow a consistent comparison with in-vivo results. More specifically, current literature on AL biomaterial in-vitro hemocompatibility data are not quantitatively comparable due to the use of unstandardized and unreliable protocols. Such a wide gap has been the main bottleneck in the improvement of AL research, preventing promising biomaterials from reaching clinical trials. This review summarizes the current state-of-the-art and status of AL technology from membrane researcher perspectives. Particularly, most of the reported in-vitro experiments to assess AL membrane hemocompatibility are compiled and critically compared to suggest the most reliable method suitable for AL biomaterial research. Also, a brief review of current approaches to improve AL hemocompatibility is summarized. STATEMENT OF SIGNIFICANCE: The importance of Artificial Lung (AL) technology has been re-emphasized in the time of the COVID-19 pandemic. The utmost bottleneck in the current AL technology is the poor hemocompatibility of the polymer membrane used for O₂/CO₂ gas exchange, limiting its use in the long-term. Unfortunately, most of the in-vitro AL experiments are unsystematic, irreproducible, and unreliable. There are no standardized in-vitro hemocompatibility characterization protocols for quantitative comparison between AL biomaterials. In this review, we tackled this bottleneck by compiling the scattered in-vitro data and suggesting the most suitable experimental protocol to obtain reliable and comparable hemocompatibility results. To the best of our knowledge, this is the first review paper focusing on the hemocompatibility challenge of AL technology.

Information Requirements under the Essential-Use Concept: PFAS Case Studies

Per- and polyfluoroalkyl substances (PFAS) are a class of substances for which there are widespread concerns about their extreme persistence in combination with toxic effects. It has been argued that PFAS should only be employed in those uses that are necessary for health or safety or are critical for the functioning of society and where no alternatives are available ("essential-use concept"). Implementing the essential-use concept requires a sufficient understanding of the current uses of PFAS and of the availability, suitability, and hazardous properties of alternatives. To illustrate the information requirements under the essential-use concept, we investigate seven different PFAS uses, three in consumer products and four industrial applications. We investigate how much information is available on the types and functions of PFAS in these uses, how much information is available on alternatives, their performance and hazardous properties and, finally, whether this information is sufficient as a basis for deciding on the essentiality of a PFAS use. The results show (i) the uses of PFAS are highly diverse and information on alternatives is often limited or lacking; (ii) PFAS in consumer products often are relatively easy to replace; (iii) PFAS uses in industrial processes can be highly complex and a thorough evaluation of the technical function of each PFAS and of the suitability of alternatives is needed; (iv) more coordination among PFAS manufacturers, manufacturers of alternatives to PFAS, users of these materials, government authorities, and other stakeholders is needed to make the process of phasing out PFAS more transparent and coherent.

Fate of Per- and Polyfluoroalkyl Substances from Durable Water-Repellent Clothing during Use

To make outdoor clothing water- or dirt-repellent, durable water-repellent (DWR) coatings based on side-chain fluorinated polymers (SFPs) are used. During use of outdoor clothing, per- and polyfluoroalkyl substances (PFASs) can be emitted from the DWR to the environment. In this study, the effects of aging, washing, and tumble drying on the concentration of extractable PFASs in the DWR of perfluorohexane-based short-chain SFPs (FC-6 chemistry) and of perfluorooctane-based long-chain SFPs (FC-8 chemistry) were assessed. For this purpose, polyamide (PA) and polyester (PES) fabrics were coated with FC-6- and FC-8-based DWRs. Results show that aging of the coated fabrics causes an increase in concentration and formation of perfluoroalkyl acids (PFAAs). The effect of aging on the volatile PFASs depends on the type of fabric. Washing causes a decrease in PFAA concentrations, and in general, volatile PFASs are partly washed out of the textiles. However, washing can also increase the extractable concentration of volatile PFASs in the fabrics. This effect becomes stronger by a combination of aging and washing. Tumble drying does not affect the PFAS concentrations in textiles. In conclusion, aging and washing of fabrics coated with the DWR based on SFPs release PFASs to the environment.

Per- and Polyfluoroalkyl Substances (PFAS) in Facemasks: Potential Source of Human Exposure to PFAS with Implications for Disposal to Landfills

Facemasks are important tools for fighting against disease spread, including Covid-19 and its variants, and some may be treated with per- and polyfluoroalkyl substances (PFAS). Nine facemasks over a range of prices were analyzed for total fluorine and PFAS. The PFAS compositions of the masks were then used to estimate exposure and the mass of PFAS discharged to landfill leachate. Fluorine from PFAS accounted only for a small fraction of total fluorine. Homologous series of linear perfluoroalkyl carboxylates and the 6:2 fluorotelomer alcohol indicated a fluorotelomer origin. Inhalation was estimated to be the dominant exposure route (40%-50%), followed by incidental ingestion (15%-40%) and dermal (11%-20%). Exposure and risk estimates were higher for children than adults, and high physical activity substantially increased inhalation exposure. These preliminary findings indicate that wearing masks treated with high levels of PFAS for extended periods of time can be a notable source of exposure and have the potential to pose a health risk. Despite modeled annual disposal of ~29-91 billion masks, and an assuming 100% leaching of individual PFAS into landfill leachate, mask disposal would contribute only an additional 6% of annual PFAS mass loads and less than 11 kg of PFAS discharged to U.S. wastewater.

An Outdoor Aging Study to Investigate the Release of Per- And Polyfluoroalkyl Substances (PFAS) from Functional Textiles

The emission of per- and polyfluoroalkyl substances (PFAS) from functional textiles was investigated via an outdoor weathering experiment in Sydney, Australia. Polyamide (PA) textile fabrics treated with different water-repellent, side-chain fluorinated polymers (SFPs) were exposed on a rooftop to multiple natural stressors, including direct sunlight, precipitation, wind, and heat for 6-months. After weathering, additional stress was applied to the fabrics through abrasion and washing. Textile characterization using a multiplatform analytical approach revealed loss of both PFAS-containing textile fragments (e.g., microfibers) as well as formation and loss of low molecular weight PFAS, both of which occurred throughout weathering. These changes were accompanied by a loss of color and water repellency of the textile. The potential formation of perfluoroalkyl acids (PFAAs) from mobile residuals was quantified by oxidative conversion of extracts from unweathered textiles. Each SFP-textile finish emitted a distinct PFAA pattern following weathering, and in some cases the concentrations exceeded regulatory limits for textiles. In addition to transformation of residual low molecular weight PFAA-precursors, release of polymeric PFAS from degradation and loss of textile fibers/particles contributed to overall PFAS emissions during weathering.

Disposition of Fluorine on New Firefighter Turnout Gear

Firefighter turnout gear is essential for reducing occupational exposure to hazardous chemicals during training and fire events. Per-and polyfluoroalkyl substances (PFASs) are observed in firefighter serum, and possible occupational sources include the air and dust of fires, aqueous film-forming foam, and turnout gear. Limited data exist for nonvolatile and volatile PFASs on firefighter turnout gear and the disposition of fluorine on the individual layers of turnout gear. Further implications for exposure to fluorine on turnout gear are not well understood. Three unused turnout garments purchased in 2019 and one purchased in 2008, were analyzed for 50 nonvolatile and 15 volatile PFASs by liquid chromatography quadrupole time-of-flight mass spectrometry (LC-qTOF-MS) and gas chromatography-mass spectrometry (GC-MS), respectively. Particle-induced gamma ray emission (PIGE), a surface technique, and instrumental neutron activation analysis (INAA), a bulk technique, were used to measure total fluorine. Bulk characterization of the layers by pyrolysis-GC/MS (py-GC/MS) was used to differentiate fluoropolymer (e.g., PTFE) films from textile layers finished with side-chain polymers. The outer layer, moisture barrier, and thermal layers of the turnout gear all yielded measured concentrations of volatile PFASs that exceeded nonvolatile PFAS concentrations, but the summed molar concentrations made up only a small fraction of total fluorine (0.0016-6.7%). Moisture barrier layers comprised a PTFE film, as determined by py-GC-MS, and gave the highest individual nonvolatile (0.159 mg F/kg) and volatile PFAS (20.7 mg F/kg) as well as total fluorine (122,000 mg F/kg) concentrations. Outer and thermal layers comprised aromatic polyamide-based fibers (aramid) treated with side-chain fluoropolymers and had lower levels of individual nonvolatile and volatile PFASs. Equal concentrations of total fluorine by both PIGE and INAA on the outer and thermal layers is consistent with treatment with a side-chain fluoropolymer coating. New turnout gear should be examined as a potential source of firefighter occupational exposure to nonvolatile and volatile PFASs in future assessments.

An Overview of Chemical Additives on (Micro)Plastic Fibers: Occurrence, Release, and Health Risks

Plastic fibers are ubiquitous in daily life with additives incorporated to improve their performance. Only a few restrictions exist for a paucity of common additives, while most of the additives used in textile industry have not been clearly regulated with threshold limits. The production of synthetic fibers, which can shed fibrous microplastics easily (< 5 mm) through mechanical abrasion and weathering, is increasing annually. These fibrous microplastics have become the main composition of microplastics in the environment. This review focuses on additives on synthetic fibers; we summarized the detection methods of additives, compared concentrations of different additive types (plasticizers, flame retardants, antioxidants, and surfactants) on (micro)plastic fibers, and analyzed their release and exposure pathways to environment and human beings. Our prediction shows that the amounts of predominant additives (phthalates, organophosphate esters, bisphenols, per- and polyfluoroalkyl substances, and nonylphenol ethoxylates) released from clothing microplastic fibers (MFs) are estimated to reach 35, 10, 553, 0.4, and 568 ton/year to water worldwide, respectively; and 119, 35, 1911, 1.4, and 1965 ton/year to air, respectively. Human exposure to MF additives via inhalation is estimated to be up to 4.5–6440 µg/person annually for the above five additives, and via ingestion 0.1–204 µg/person. Notably, the release of additives from face masks is nonnegligible that annual human exposure to phthalates, organophosphate esters, per- and polyfluoroalkyl substances from masks via inhalation is approximately 491–1820 µg/person. This review helps understand the environmental fate and potential risks of released additives from (micro)plastic fibers, with a view to providing a basis for future research and policy designation of textile additives.

Hydrophobic Leather Coating for Footwear Applications by a Low-Pressure Plasma Polymerisation Process

The aim of this work is to develop hydrophobic coatings on leather materials by plasma polymerisation with a low-pressure plasma system using an organosilicon compound, such as hexamethyldisiloxane (HMDSO), as chemical precursor. The hydrophobic coatings obtained by this plasma process were evaluated with different experimental techniques such as Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and standardised tests including colour measurements of the samples, surface coating thickness and water contact angle (WCA) measurements. The results obtained indicated that the monomer had polymerised correctly and completely on the leather surface creating an ultra-thin layer based on polysiloxane. The surface modification produced a water repellent effect on the leather that does not alter the visual appearance and haptic properties. Therefore, the application of the plasma deposition process showed promising results that makes it a more sustainable alternative to conventional functional coatings, thus helping to reduce the use of hazardous chemicals in the finishing process of footwear manufacturing.

Finding essentiality feasible: common questions and misinterpretations concerning the "essential-use" concept

The essential-use concept is a tool that can guide the phase-out of per- and polyfluoroalkyl substances (PFAS) and potentially other substances of concern. This concept is a novel approach to chemicals management that determines whether using substances of concern, such as PFAS, is truly essential for a given functionality. To assess the essentiality of a particular use case, three considerations need to be addressed: (1) the function (chemical, end use and service) that the chemical provides in the use case, (2) whether the function is necessary for health and safety and critical for the functioning of society and (3) if the function is necessary, whether there are viable alternatives for the chemical for this particular use. A few illustrative examples of the three-step process are provided for use cases of PFAS. The essential-use concept takes chemicals management away from a substance-by-substance approach to a group approach. For PFAS and other substances of concern, it offers a more rapid pathway toward effective management or phase-out. Parts of the concept of essential use have already been widely applied in global treaties and international regulations and it has also been recently used by product manufacturers and retailers to phase out substances of concern from supply chains. Herein some of the common questions and misinterpretations regarding the practical application of the essential-use concept are reviewed, and answers and further clarifications are provided.

Multifunctional Textiles Based on Three-Dimensional Hierarchically Structured TiO2 Nanowires

The development of three-dimensional (3D) micro-/nanostructures with multiscale hierarchy offers new potential for the improvement of the pristine textile properties. In this work, a polyester fabric coated with 3D hierarchically structured rutile TiO₂ nanowires (THNWP) was fabricated by a facile hydrothermal strategy. The THNWP samples exhibit markedly improved photocatalytic activities and antibacterial properties owing to their 3D hierarchical architecture constructed by one-dimensional nanowire structures, good crystallinity, excellent light-harvesting capability, and fast electron-transfer rate. Furthermore, the unique 3D hierarchical nanostructures also combine with the monofilament to produce ternary-scale hierarchy, which endows the fabric surface with outstanding superamphiphobicity after further facile fluorination treatment. The supportive air-pockets trapped within the unique ternary-scale architectures are proved to be the crucial factor in the achievement of high liquid repellency, and the highest performing superamphiphobic surface is capable of repelling liquids down to a minimal surface tension of 23.4 mN m^-1. We envision that our findings may possess great potential in the bottom-up design of high-performance textiles.

Impact of dyes and finishes on the aquatic biodegradability of cotton textile fibers and microfibers released on laundering clothes: Correlations between enzyme adsorption and activity and biodegradation rates

The presence and biodegradability of textile microfibers shed during laundering or use is an important environmental issue. In this research, the influence of common textile finishes on the persistence of cotton fibers in an aerobic aquatic environment was assessed. The biodegradation of cotton knitted fabrics with different finishes, silicone softener, durable press, water repellent, and a blue reactive dye was evaluated. The rate of biodegradation decreased with durable press and water repellant finishing treatments. In terms of the final extent of biodegradation, there was no significant difference between the samples. All samples reached more than 60% biodegradation in 102 days. The biodegradation rates were in agreement with observed trends of the same samples for cellulase mediated hydrolysis and cellulase adsorption experiments, indicating the finishes impact the initial adsorption of enzymes excreted by the microorganisms and the initial rates of biodegradation, however despite this the cellulosic material maintains its biodegradability.

The Roles of Membrane Technology in Artificial Organs: Current Challenges and Perspectives

The recent outbreak of the COVID-19 pandemic in 2020 reasserted the necessity of artificial lung membrane technology to treat patients with acute lung failure. In addition, the aging world population inevitably leads to higher demand for better artificial organ (AO) devices. Membrane technology is the central component in many of the AO devices including lung, kidney, liver and pancreas. Although AO technology has improved significantly in the past few decades, the quality of life of organ failure patients is still poor and the technology must be improved further. Most of the current AO literature focuses on the treatment and the clinical use of AO, while the research on the membrane development aspect of AO is relatively scarce. One of the speculated reasons is the wide interdisciplinary spectrum of AO technology, ranging from biotechnology to polymer chemistry and process engineering. In this review, in order to facilitate the membrane aspects of the AO research, the roles of membrane technology in the AO devices, along with the current challenges, are summarized. This review shows that there is a clear need for better membranes in terms of biocompatibility, permselectivity, module design, and process configuration.

A Critical Review of a Recommended Analytical and Classification Approach for Organic Fluorinated Compounds with an Emphasis on Per- and Polyfluoroalkyl Substances

Organic fluorinated compounds have been detected in various environmental media and biota. Some of these compounds are regulated locally (e.g., perfluorononanoic acid maximum contaminant level in drinking water by the New Jersey Dept. of Environmental Protection), nationally (e.g., perfluorooctanoic acid maximum acceptable concentration in drinking water by Health Canada), or internationally (e.g., Stockholm Convention on Persistent Organic Pollutants). Globally, regulators and researchers seek to identify the organic fluorinated compounds associated with potential adverse effects, bioaccumulation, mobility, and persistence to manage their risks, and, to understand the beneficial attributes they bring to products such as first responder gear, etc. Clarity is needed to determine the best analytical method for the goal of the analyses (e.g., pure research or analysis to determine the extent of an accidental release, monitoring groundwater for specific compounds to determine regulatory compliance, and establish baseline levels in a river of organic fluorinated substances associated with human health risk prior to a clean-up effort). Analytical techniques that identify organic fluorine coupled together with targeted chemical analysis will yield information sufficient to identify public health or environmental hazards. Integr Environ Assess Manag 2021;17:331-351. © 2020. W.L. Gore & Associates Inc. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Impact of dyes and finishes on the microfibers released on the laundering of cotton knitted fabrics

The influence of common textile finishes on cotton fabrics on the generation of microfibers during laundering was assessed. Microfiber release was determined to be in the range of 9000-14,000 particles per gram of cotton fabric. Cotton knitted fabrics treated with softener and durable press generate more microfibers (1.30-1.63 mg/g fabric) during laundering by mass and number than untreated fabric (0.73 mg/g fabric). The fabrics treated with softener generated the longest average microfiber length (0.86 mm), whereas durable press and water repellent treatments produced the shortest average microfiber length (0.62 and 0.63 mm, respectively). In general, the changes in the mechanical properties of the fibers and fabrics due to the finishing treatments are the main factor affecting the microfiber release. The abrasion resistance of the fabrics decreases for durable press treatments and water repellent treatments due to the brittleness in the structure originated by the crosslinking treatment. In the case of the softener treatment, the fabric surface is soft and smooth decreasing the friction coefficient between fibers favoring the fibers loosening from the textile and resulting in a high tendency for fuzz formation and microfiber release. These findings are useful for the textile industry in the design and selection of materials and treatments for the reduction of synthetic or natural microfiber shedding from textiles.

Cross-Linking Strategies for Fluorine-Containing Polymer Coatings for Durable Resistant Water- and Oil-Repellency

Functional coatings for application on surfaces are of growing interest. Especially in the textile industry, durable water and oil repellent finishes are of special demand for implementation in the outdoor sector, but also as safety-protection clothes against oil or chemicals. Such oil and chemical repellent textiles can be achieved by coating surfaces with fluoropolymers. As many concerns exist regarding (per)fluorinated polymers due to their high persistence and accumulation capacity in the environment, a durable and resistant coating is essential also during the washing processes of textiles. Within the present study, different strategies are examined for a durable resistant cross-linking of a novel fluoropolymer on the surface of fibers. The monomer 2-((1,1,2-trifluoro-2-(perfluoropropoxy)ethyl)thio)ethyl acrylate, whose fluorinated side-chain is degradable by treatment with ozone, was used for this purpose. The polymers were synthesized via free radical polymerization in emulsion, and different amounts of cross-linking reagents were copolymerized. The final polymer dispersions were applied to cellulose fibers and the cross-linking was induced thermally or by irradiation with UV-light. In order to investigate the cross-linking efficiency, tensile elongation studies were carried out. In addition, multiple washing processes of the fibers were performed and the polymer loss during washing, as well as the effects on oil and water repellency were investigated. The cross-linking strategy paves the way to a durable fluoropolymer-based functional coating and the polymers are expected to provide a promising and sustainable alternative to functional coatings.

Side-chain fluorotelomer-based polymers in children car seats

Fabric and foam samples from popular children car seats marketed in the United States during 2018 were tested for fluorine content by particle-included gamma ray emission spectroscopy (PIGE, n = 93) and X-ray photoelectron spectroscopy (XPS, n = 36), as well as for per- and polyfluoroalkyl substances (PFAS) by liquid and gas chromatography mass spectrometry (LC/MS and GC/MS, n = 36). PFAS were detected in 97% of the car seat samples analyzed with MS, with total concentrations of 43 PFAS (∑PFAS) up to 268 ng/g. Fabric samples generally had greater ∑PFAS levels than foam and laminated composites of foam and fabric. The three fabric samples with the highest total fluorine content as represented by the highest PIGE signal were also subjected to ultraviolet (UV) irradiation and the total oxidizable precursor (TOP) assay. Results from these treatments, as well as the much higher organofluorine levels measured by PIGE compared to LC/MS and GC/MS, suggested the presence of side-chain fluorotelomer-based polymers (FTPs), which have the potential to readily degrade into perfluoroalkyl acids (PFAAs) under UV light. Furthermore, fluorotelomer (meth)acrylates were found to be indicators for the presence of (meth)acrylate-linked FTPs in consumer products, and thus confirmed that at least half of the tested car seats had FTP-treated fabrics. Finally, extraction of selected samples with synthetic sweat showed that ionic PFAS, particularly those with fluorinated carbons ≤8, can migrate from fabric to sweat, suggesting a potential dermal route of exposure.

The high persistence of PFAS is sufficient for their management as a chemical class

Per- and polyfluoroalkyl substances (PFAS) are a class of synthetic organic substances with diverse structures, properties, uses, bioaccumulation potentials and toxicities. Despite this high diversity, all PFAS are alike in that they contain perfluoroalkyl moieties that are extremely resistant to environmental and metabolic degradation. The vast majority of PFAS are therefore either non-degradable or transform ultimately into stable terminal transformation products (which are still PFAS). Under the European chemicals regulation this classifies PFAS as very persistent substances (vP). We argue that this high persistence is sufficient concern for their management as a chemical class, and for all "non-essential" uses of PFAS to be phased out. The continual release of highly persistent PFAS will result in increasing concentrations and increasing probabilities of the occurrence of known and unknown effects. Once adverse effects are identified, the exposure and associated effects will not be easily reversible. Reversing PFAS contamination will be technically challenging, energy intensive, and costly for society, as is evident in the efforts to remove PFAS from contaminated land and drinking water sources.

Human Health and Ocean Pollution

Background

Pollution - unwanted waste released to air, water, and land by human activity - is the largest environmental cause of disease in the world today. It is responsible for an estimated nine million premature deaths per year, enormous economic losses, erosion of human capital, and degradation of ecosystems. Ocean pollution is an important, but insufficiently recognized and inadequately controlled component of global pollution. It poses serious threats to human health and well-being. The nature and magnitude of these impacts are only beginning to be understood.

Goals

(1) Broadly examine the known and potential impacts of ocean pollution on human health. (2) Inform policy makers, government leaders, international organizations, civil society, and the global public of these threats. (3) Propose priorities for interventions to control and prevent pollution of the seas and safeguard human health.

Methods

Topic-focused reviews that examine the effects of ocean pollution on human health, identify gaps in knowledge, project future trends, and offer evidence-based guidance for effective intervention.

Environmental Findings

Pollution of the oceans is widespread, worsening, and in most countries poorly controlled. It is a complex mixture of toxic metals, plastics, manufactured chemicals, petroleum, urban and industrial wastes, pesticides, fertilizers, pharmaceutical chemicals, agricultural runoff, and sewage. More than 80% arises from land-based sources. It reaches the oceans through rivers, runoff, atmospheric deposition and direct discharges. It is often heaviest near the coasts and most highly concentrated along the coasts of low- and middle-income countries. Plastic is a rapidly increasing and highly visible component of ocean pollution, and an estimated 10 million metric tons of plastic waste enter the seas each year. Mercury is the metal pollutant of greatest concern in the oceans; it is released from two main sources - coal combustion and small-scale gold mining. Global spread of industrialized agriculture with increasing use of chemical fertilizer leads to extension of Harmful Algal Blooms (HABs) to previously unaffected regions. Chemical pollutants are ubiquitous and contaminate seas and marine organisms from the high Arctic to the abyssal depths.

Ecosystem Findings

Ocean pollution has multiple negative impacts on marine ecosystems, and these impacts are exacerbated by global climate change. Petroleum-based pollutants reduce photosynthesis in marine microorganisms that generate oxygen. Increasing absorption of carbon dioxide into the seas causes ocean acidification, which destroys coral reefs, impairs shellfish development, dissolves calcium-containing microorganisms at the base of the marine food web, and increases the toxicity of some pollutants. Plastic pollution threatens marine mammals, fish, and seabirds and accumulates in large mid-ocean gyres. It breaks down into microplastic and nanoplastic particles containing multiple manufactured chemicals that can enter the tissues of marine organisms, including species consumed by humans. Industrial releases, runoff, and sewage increase frequency and severity of HABs, bacterial pollution, and anti-microbial resistance. Pollution and sea surface warming are triggering poleward migration of dangerous pathogens such as the Vibrio species. Industrial discharges, pharmaceutical wastes, pesticides, and sewage contribute to global declines in fish stocks.

Human Health Findings

Methylmercury and PCBs are the ocean pollutants whose human health effects are best understood. Exposures of infants in utero to these pollutants through maternal consumption of contaminated seafood can damage developing brains, reduce IQ and increase children's risks for autism, ADHD and learning disorders. Adult exposures to methylmercury increase risks for cardiovascular disease and dementia. Manufactured chemicals - phthalates, bisphenol A, flame retardants, and perfluorinated chemicals, many of them released into the seas from plastic waste - can disrupt endocrine signaling, reduce male fertility, damage the nervous system, and increase risk of cancer. HABs produce potent toxins that accumulate in fish and shellfish. When ingested, these toxins can cause severe neurological impairment and rapid death. HAB toxins can also become airborne and cause respiratory disease. Pathogenic marine bacteria cause gastrointestinal diseases and deep wound infections. With climate change and increasing pollution, risk is high that Vibrio infections, including cholera, will increase in frequency and extend to new areas. All of the health impacts of ocean pollution fall disproportionately on vulnerable populations in the Global South - environmental injustice on a planetary scale.

Conclusions

Ocean pollution is a global problem. It arises from multiple sources and crosses national boundaries. It is the consequence of reckless, shortsighted, and unsustainable exploitation of the earth's resources. It endangers marine ecosystems. It impedes the production of atmospheric oxygen. Its threats to human health are great and growing, but still incompletely understood. Its economic costs are only beginning to be counted.Ocean pollution can be prevented. Like all forms of pollution, ocean pollution can be controlled by deploying data-driven strategies based on law, policy, technology, and enforcement that target priority pollution sources. Many countries have used these tools to control air and water pollution and are now applying them to ocean pollution. Successes achieved to date demonstrate that broader control is feasible. Heavily polluted harbors have been cleaned, estuaries rejuvenated, and coral reefs restored.Prevention of ocean pollution creates many benefits. It boosts economies, increases tourism, helps restore fisheries, and improves human health and well-being. It advances the Sustainable Development Goals (SDG). These benefits will last for centuries.

Recommendations

World leaders who recognize the gravity of ocean pollution, acknowledge its growing dangers, engage civil society and the global public, and take bold, evidence-based action to stop pollution at source will be critical to preventing ocean pollution and safeguarding human health.Prevention of pollution from land-based sources is key. Eliminating coal combustion and banning all uses of mercury will reduce mercury pollution. Bans on single-use plastic and better management of plastic waste reduce plastic pollution. Bans on persistent organic pollutants (POPs) have reduced pollution by PCBs and DDT. Control of industrial discharges, treatment of sewage, and reduced applications of fertilizers have mitigated coastal pollution and are reducing frequency of HABs. National, regional and international marine pollution control programs that are adequately funded and backed by strong enforcement have been shown to be effective. Robust monitoring is essential to track progress.Further interventions that hold great promise include wide-scale transition to renewable fuels; transition to a circular economy that creates little waste and focuses on equity rather than on endless growth; embracing the principles of green chemistry; and building scientific capacity in all countries.Designation of Marine Protected Areas (MPAs) will safeguard critical ecosystems, protect vulnerable fish stocks, and enhance human health and well-being. Creation of MPAs is an important manifestation of national and international commitment to protecting the health of the seas.

An overview of the uses of per- and polyfluoroalkyl substances (PFAS)

Per- and polyfluoroalkyl substances (PFAS) are of concern because of their high persistence (or that of their degradation products) and their impacts on human and environmental health that are known or can be deduced from some well-studied PFAS. Currently, many different PFAS (on the order of several thousands) are used in a wide range of applications, and there is no comprehensive source of information on the many individual substances and their functions in different applications. Here we provide a broad overview of many use categories where PFAS have been employed and for which function; we also specify which PFAS have been used and discuss the magnitude of the uses. Despite being non-exhaustive, our study clearly demonstrates that PFAS are used in almost all industry branches and many consumer products. In total, more than 200 use categories and subcategories are identified for more than 1400 individual PFAS. In addition to well-known categories such as textile impregnation, fire-fighting foam, and electroplating, the identified use categories also include many categories not described in the scientific literature, including PFAS in ammunition, climbing ropes, guitar strings, artificial turf, and soil remediation. We further discuss several use categories that may be prioritised for finding PFAS-free alternatives. Besides the detailed description of use categories, the present study also provides a list of the identified PFAS per use category, including their exact masses for future analytical studies aiming to identify additional PFAS.

An Experimental Investigation on Optimizing Liquid Repellency of Fluorochemical Urethane Finish and Its Effect on the Physical Properties of Polyester/Cotton Blended Fabric

This paper aims to optimize the liquid repellency performance of fluorochemical urethane (FU)—a patented technology with a shorter fluorocarbon chain (C4). FU is free from persistent bioaccumulative toxins such as perfluorooctanoic acid (PFOA) and perfluorooctanesulfonate (PFOS), unlike the long-chain fluorinated chemicals (>C6). Different sets of varied finish concentrations with an extender and a wetting agent were prepared to treat the 65/35% polyester/cotton blended fabric. The finish concentration was optimized based on the liquid repellency (water and oil-repellency) of the treated fabric and its laundering durability. In addition, the effect of the finish concentration on selected physical properties of the treated fabric was studied as well. The liquid repellency, laundering durability, and selected physical properties of the treated and untreated fabrics were analyzed using ASTM and AATCC standard test methods. The results of textile substrates treated with 60 g/L of FU show an optimum balance of desired liquid repellency without affecting the physical properties of the fabric significantly.

Total oxidizable precursor assay in the determination of perfluoroalkyl acids in textiles collected from the United States

Per- and polyfluoroalkyl substances (PFASs) are used in specialty/functional textiles to impart oil, water, and stain repellency. Little is known, however, with regard to the occurrence of PFASs in textiles including infant clothing. In this study, 13 perfluoroalkyl acids (PFAAs), comprising four perfluoroalkyl sulfonic acids (PFSAs; C4-C10) and nine perfluoroalkyl carboxylic acids (PFCAs; C4-C12) were determined in 160 textile samples collected from the United States. Two extraction methods, one involving a simple solvent extraction (i.e., before oxidation) and the other with an oxidative treatment (i.e., after oxidation) of textile extracts, were used. The sum concentrations of 13 PFAAs (i.e., ∑PFAA) in textile extracts before oxidation ranged from <LOD to 63.7 μg/m² (<LOD-285 ng/g), with a mean value of 3.18 μg/m² (14.2 ng/g). ∑PFAA concentrations were the highest in flame retarded textiles (n = 23; mean: 13.3 μg/m²; 59.4 ng/g), followed by water repellent textiles (n = 56; 2.88 μg/m²; 12.9 ng/g) and infant clothes (n = 81; 0.521 μg/m²; 2.33 ng/g). C4-C10 PFCAs accounted for at least three-quarters of the ∑PFAA content in our textile samples. Textile extracts analyzed after oxidative treatment exhibited ∑PFAA concentrations 10-fold higher than those in extracts analyzed prior to oxidation, which suggested that PFAA precursors are used in textiles. Precursors that generated C4-C5 PFCAs, upon oxidation, were more prevalent than those that yielded PFOA. The calculated dermal exposure doses in infants of PFAAs present in clothes were at least 1-2 orders of magnitude below the reference doses proposed by the United States Environmental Protection Agency. This is the first time that the oxidative treatment was applied in the analysis of PFASs in textiles, and our results suggest the existence of PFCA precursors in textiles.

Strategies for grouping per- and polyfluoroalkyl substances (PFAS) to protect human and environmental health

Grouping strategies are needed for per- and polyfluoroalkyl substances (PFAS), in part, because it would be time and resource intensive to test and evaluate the more than 4700 PFAS on the global market on a chemical-by-chemical basis. In this paper we review various grouping strategies that could be used to inform actions on these chemicals and outline the motivations, advantages and disadvantages for each. Grouping strategies are subdivided into (1) those based on the intrinsic properties of the PFAS (e.g. persistence, bioaccumulation potential, toxicity, mobility, molecular size) and (2) those that inform risk assessment through estimation of cumulative exposure and/or effects. The most precautionary grouping approach of those reviewed within this article suggests phasing out PFAS based on their high persistence alone (the so-called "P-sufficient" approach). The least precautionary grouping approach reviewed advocates only grouping PFAS for risk assessment that have the same toxicological effects, modes and mechanisms of action, and elimination kinetics, which would need to be well documented across different PFAS. It is recognised that, given jurisdictional differences in chemical assessment philosophies and methodologies, no one strategy will be generally acceptable. The guiding question we apply to the reviewed grouping strategies is: grouping for what purpose? The motivation behind the grouping (e.g. determining use in products vs. setting guideline levels for contaminated environments) may lead to different grouping decisions. This assessment provides the necessary context for grouping strategies such that they can be adopted as they are, or built on further, to protect human and environmental health from potential PFAS-related effects.

The effect of weathering on per- and polyfluoroalkyl substances (PFASs) from durable water repellent (DWR) clothing

To assess the effects of weathering on per- and polyfluoroalkyl substances (PFASs) from durable water repellent (DWR) clothing, thirteen commercial textile samples were exposed to elevated ultra violet (UV) radiation, humidity, and temperature in an aging device for 300 h, which mimics the lifespan of outdoor clothing. Before and after aging, the textile samples were extracted and analysed for the ionic PFASs (perfluoroalkyl acids (PFAAs), perfluorooctane sulfonamide (FOSA)) and volatile PFASs (fluorotelomer alcohols (FTOHs), acrylates (FTACs) and methacrylates (FTMACs)). Results showed that weathering can have an effect on PFASs used in DWR of outdoor clothing, both on the PFAS profile and on the measured concentrations. In most weathered samples the PFAA concentrations increased by 5- to more than 100-fold, while PFAAs not detected in the original textiles were detected in the weathered samples. DWR chemistries are based on side-chain fluorinated polymers. A possible explanation for the increase in concentration of the PFAAs is hydrolysis of the fluorotelomer based polymers (FTPs), or degradation of the FTOHs, which are used in the manufacturing of the FTPs. The concentrations of volatile PFASs also increased, by a factor up to 20. Suggested explanations are the degradation of the DWR polymers, making non-extractable fluorines extractable, or the transformation or degradation of unknown precursors. Further research is needed to unravel the details of these processes and to determine the transformation routes. This study shows that setting maximum tolerance limits only for a few individual PFASs is not sufficient to control these harmful substances in outdoor clothing.

An (Eco)Toxicity Life Cycle Impact Assessment Framework for Per- And Polyfluoroalkyl Substances

A framework for characterizing per- and polyfluoroalkyl substances (PFASs) in life cycle impact assessment (LCIA) is proposed. Thousands of PFASs are used worldwide, with special properties imparted by the fluorinated alkyl chain. Our framework makes it possible to characterize a large part of the family of PFASs by introducing transformation fractions that translate emissions of primary emitted PFASs into the highly persistent terminal degradation products: the perfluoroalkyl acids (PFAAs). Using a PFAA-adapted characterization model, human toxicity as well as marine and freshwater aquatic ecotoxicity characterization factors are calculated for three PFAAs, namely perfluorooctanoic acid (PFOA) perfluorohexanoic acid (PFHxA) and perfluorobutanesulfonic acid (PFBS). The model is evaluated to adequately capture long-term fate, where PFAAs are predicted to accumulate in open oceans. The characterization factors of the three PFAAs are ranked among the top 5% for marine ecotoxicity, when compared to 3104 chemicals in the existing USEtox results databases. Uncertainty analysis indicates potential for equally high ranks for human health impacts. Data availability constitutes an important limitation creating uncertainties. Even so, a life cycle assessment (LCA) case study illustrates practical application of our proposed framework, demonstrating that even low emissions of PFASs can have large effects on LCA results.

Paper-Based Oil Barrier Packaging using Lignin-Containing Cellulose Nanofibrils

Environmental and health concerns are driving the need for new materials in food packaging to replace poly- or perfluorinated compounds, aluminum layers, and petroleum-based polymers. Cellulose nanofibrils (CNF) have been shown by a number of groups to form excellent barrier layers to oxygen and grease. However, the influence of lignin-containing cellulose nanofibrils (LCNF) on film barrier properties has not been well reported. Herein, thin films (16 g/m²) from LCNF and CNF were formed on paper substrates through a filtration technique that should mimic the addition of material at the wet end of a paper machine. Surface, barrier and mechanical attributes of these samples were characterized. The analysis on the surface free energy and water contact angle pointed to the positive role of lignin distribution in inducing a certain degree of water repellency. The observed oxygen transmission rate (OTR) and water vapor permeability (WVP) values of LCNF-coated samples were nearly similar to those with CNF. However, the presence of lignin improved the oil proof performance; these layered designs exhibited an excellent resistance to grease (kit No. 12). The attained papers with LCNF coat were formed into bowl-like containers using metal molds and a facile oven drying protocol to evaluate their resistance to oil penetration over a longer period. The results confirmed the capability of LCNF layer in holding commercially available cooking oils with no evidence of leakage for over five months. Also, an improvement in the tensile strength and elongation at break was observed in the studied papers. Overall, the proposed packaging material possesses viable architecture and can be considered as a fully wood-based alternative for the current fluorocarbon systems.

Distribution of novel and legacy per-/polyfluoroalkyl substances in serum and its associations with two glycemic biomarkers among Chinese adult men and women with normal blood glucose levels

In recent years, the occurrence of novel per-/polyfluoroalkyl substances (PFASs) such as polyfluoroalkyl ether sulfonates (PFAESs) in human samples have aroused attention due to the change in PFASs production profile, however, the data are still lacking. Furthermore, epidemiological studies have examined the associations of PFAS exposure with glucose homeostasis, but with inconsistent results. Therefore, in this study, fasting serum samples from 252 participants with an age range from 19 to 87 years old were collected in Tianjin, China. A total of 21 target PFASs were determined to analyze the levels and distribution of novel and legacy PFASs in serum and to further evaluate the cross-sectional associations of serum PFAS concentrations with two glycemic biomarkers (i.e., fasting glucose and glycated hemoglobin (HbA1c)). 6:2 chlorinated PFAES (6:2 Cl-PFAES) and trifluoroacetic acid (TFA) were widely detected novel PFASs (greater than90%) with relatively high median concentrations (8.64 ng/mL and 8.46 ng/mL, respectively), which were second only to the two dominant legacy PFASs, i.e., perfluorooctanoic acid (PFOA, 14.83 ng/mL) and perfluorooctane sulfonic acid (14.24 ng/mL). The percentage contributions to the total known PFASs were separately 17.6% and 17.2% for 6:2 Cl-PFAES and TFA. The levels of 6:2 Cl-PFAES were significantly correlated with age and BMI, and the concentrations of TFA were also significantly correlated with age. Furthermore, 1% increase in serum PFOA and perfluorononanoic acid (PFNA) was separately significantly associated with 0.018% [95% confidence interval (CI): 0.004%, 0.033%] and 0.022% (95% CI: 0.007%, 0.037%) increment in fasting glucose levels. Similarly, 1% increase in serum perfluorohexanoic acid, PFNA, and perfluorohexane sulfonic acid was significantly associated with 0.030% (95% CI: 0.010%, 0.051%), 0.018% (95% CI: 0.003%, 0.033%), 0.007% (95% CI: 0.003%, 0.011%) increment in HbA1c levels, respectively. These findings suggested that 6:2 Cl-PFAES and TFA showed greater contributions to PFASs in serum and supported an association of exposure to PFASs with fasting glucose and HbA1c.

Release of Side-Chain Fluorinated Polymer-Containing Microplastic Fibers from Functional Textiles During Washing and First Estimates of Perfluoroalkyl Acid Emissions

The quantity and composition of fibers released from functional textiles during accelerated washing were investigated using the GyroWash method. Two fabrics [polyamide (PA) and polyester/cotton (PES/CO)] were selected and coated with perfluorohexane-based side-chain fluorinated polymers. Fibers released during washing ranged from ∼10 to 500 μ with a similar distribution for the two textile types. The PA-based fabric released considerably more fibers >20 μm in length compared to the PES/CO-based fabric (>1000/GyroWash for PA vs ∼200/GyroWash fibers for PES/CO). After one GyroWash (2-15 domestic washes), fibers that contained approximately 240 and 1300 μg total fluorine per square meter (μg F/m²) were released from the PA and PES/CO fabrics, respectively. Current understanding of the fate of microplastic fibers suggests that a large fraction of these fibers reach the environment either in effluent wastewater or sewage sludge applied to land. In the environment, the fluorinated side chains will be slowly cleaved from the backbone of the side-chain fluorinated polymers coated on the fibers and then transformed into short-chain perfluoroalkyl acids. On the European scale, emissions of up to ∼0.7 t of fluorotelomer alcohol (6:2 FTOH) per year were estimated for outdoor rain jackets treated with fluorotelomer-based side-chain fluorinated polymers.

The concept of essential use for determining when uses of PFASs can be phased out

Because of the extreme persistence of per- and polyfluoroalkyl substances (PFASs) and their associated risks, the Madrid Statement argues for stopping their use where they are deemed not essential or when safer alternatives exist. To determine when uses of PFASs have an essential function in modern society, and when they do not, is not an easy task. Here, we: (1) develop the concept of "essential use" based on an existing approach described in the Montreal Protocol, (2) apply the concept to various uses of PFASs to determine the feasibility of elimination or substitution of PFASs in each use category, and (3) outline the challenges for phasing out uses of PFASs in society. In brief, we developed three distinct categories to describe the different levels of essentiality of individual uses. A phase-out of many uses of PFASs can be implemented because they are not necessary for the betterment of society in terms of health and safety, or because functional alternatives are currently available that can be substituted into these products or applications. Some specific uses of PFASs would be considered essential because they provide for vital functions and are currently without established alternatives. However, this essentiality should not be considered as permanent; rather, constant efforts are needed to search for alternatives. We provide a description of several ongoing uses of PFASs and discuss whether these uses are essential or non-essential according to the three essentiality categories. It is not possible to describe each use case of PFASs in detail in this single article. For follow-up work, we suggest further refining the assessment of the use cases of PFASs covered here, where necessary, and expanding the application of this concept to all other uses of PFASs. The concept of essential use can also be applied in the management of other chemicals, or groups of chemicals, of concern.

Environmentally benign non-wettable textile treatments: A review of recent state-of-the-art

Among superhydrophobic materials, non-wettable textiles are probably the ones that come in contact or interact with the human body most frequently. Hence, textile treatments for water or oil repellency should be non-toxic, biocompatible, and comply with stringent health standards. Moreover, considering the volume of the worldwide textile industry, these treatments should be scalable, sustainable, and eco-friendly. Due to this awareness, more and more non-wettable textile treatments with eco-friendly processes and green or non-toxic chemicals are being adopted and reported. Although fluorinated alkylsilanes or fluorinated polymers with C8 chemistry (with ≥ 8 fluorinated carbon atoms) are the best performing materials to render textiles water or oil repellent, they pose substantial health and environmental problems and are being banned. For this reason, water/solvent-borne, C8-free vehicles for non-wettable treatment formulations are probably the only ones that can have commercialization prospects. Hence, researchers have come up with a variety of new, non-toxic, green formulations and materials to render fabrics liquid repellent that constitute the focus of this review paper. As such, this review article discusses and summarizes recent developments and techniques on various sustainable superhydrophobic treatments for textiles, with comparable performance and durability to formulations based on fluorinated C8 compounds. The current state-of-the-art technologies, potential commercialization prospects, and relevant limitations are discussed and summarized with examples. The review also attempts to indicate promising future strategies and new materials that can transform the process for non-wettable textiles into an all-sustainable technology.

Occurrence of Single- and Double-Peaked Emission Profiles of Synthetic Chemicals

This work aims to elucidate the circumstances that can lead to two peaks in the temporal emission profile of synthetic chemicals. Using a simplified substance flow model, we explore how emission factors, product lifespan, and degradation half-life in waste stock influence the (i) relative importance of emissions from three lifecycle stages (industrial processes, use phase, and waste disposal), and (ii) the resulting composite emission profile. A double-peaked emission profile occurs if the lifespan of products containing the chemical is longer than its production history, and the gross emission factor from waste disposal exceeds that from the use phase. Since most chemicals fail to meet these two conditions, it is reasonable to use single-peaked emission profile as the default in environmental studies. On the basis of their emission profiles and contributions from individual lifecycle stages, we can categorize chemicals into "simple single-peakers", "composite single-peakers", and "double-peakers". Our simplified model derived emission profiles for five real chemicals that agree well with earlier, more sophisticated calculations, indicating the model's ability to capture the essential features of actual emissions. It is hoped that the model and conclusions in this work will benefit both environmental modelers and decision makers.