Comparative application of solid-phase microextraction fibre assemblies and semi-permeable membrane devices as passive air samplers for semi-volatile chlorinated organic compounds. A case study on the landfill "Grube Antonie" in Bitterfeld, Germany

Distribution, sources, and ecological risk assessment of polycyclic aromatic hydrocarbons in agricultural and dumpsite soils in Sierra Leone

This study investigates the concentration and distribution of polycyclic aromatic hydrocarbons (PAHs) in soils, potential sources, risk assessment, and soil physicochemical properties influencing PAH distribution in developed and remote cities in Sierra Leone. Seventeen topsoil samples (0-20 cm) were collected and analyzed for 16 PAHs. The average concentrations of Σ₁₆PAH in soils in the surveyed areas were 1142 ng g^-1 dw, 265 ng g^-1 dw, 79.7 ng g^-1 dw, 54.3 ng g^-1 dw, 54.2 ng g^-1 dw, 52.3 ng g^-1 dw, and 36.6 ng g^-1 dw in Kingtom, Waterloo, Magburaka, Bonganema, Kabala, Sinikoro, and Makeni, respectively. Based on the European soil quality guidelines, Kingtom and Waterloo soils were categorized as heavily and weakly contaminated soil PAHs respectively. The main PAH compounds of this study were 2-ring, 4-ring, and 5-ring PAHs. High molecular weight PAHs (4-6 rings) made up 62.5% of the total PAHs, while low molecular weight PAHs (2-3 rings) was 37.5%. In general, HMWPAHs were predominant in Kingtom, followed by Waterloo. The appointment of PAH sources using different methods revealed mixed sources, but predominantly pyrogenic sources (petroleum, biomass, coal, and fossil fuel contributions). Soil pH has a significant impact on PAH distribution. The toxicity equivalent quantity (TEQ_BaP) levels in soils pose a potential health risk to residents in developed cities but pose a negligible health risk to residents in remote cities. This study is significant as its findings reveal the status of PAH soil contamination in Sierra Leone. The results have important implications for policymakers and stakeholders to identify high-risk zones and establish proper environmental monitoring programs, pollution control measures, and remediation strategies to prevent future risks.

Exploring the partitioning of hydrophobic organic compounds between water, suspended particulate matter and diverse fish species in a German river ecosystem

BACKGROUND

Bioaccumulation of hydrophobic organic compounds (HOCs) along freshwater food chains is a major environmental concern as top predators in food webs are relevant for human consumption. To characterize and manage the associated risks, considerable numbers of organisms are sampled regularly for monitoring purposes. However, ethical and financial issues call for an alternative, more generic and more robust approach for assessing the internal exposure of fish that circumvents large variability in biota sampling due to interindividual differences. Passive sampling devices (PSDs) offer a fugacity-based approach for pollutant enrichment from different abiotic environmental compartments with a subsequent estimation of bioaccumulation in fish which we explored and compared to HOC concentrations in fish as determined using traditional approaches.

RESULTS

In this study, concentrations in silicone-based PSDs applied to the water phase and suspended particulate matter (SPM) of a river polluted with HOCs were used to estimate the concentration in model lipids at thermodynamic equilibrium with either environmental compartment. For comparison, muscle tissue of seven fish species (trophic level 1.8 to 2.8) was extracted using traditional exhaustive solvent extraction, and the lipid-normalized concentrations of HOCs were determined. The PSD-based data from SPM proved to be a more conservative estimator for HOCs accumulated in fish than those from water. Body length of the fish was found to be more suitable to describe increasing accumulation of HOCs than their trophic level as derived from stable isotope analysis and might offer a suitable alternative for future studies.

CONCLUSIONS

By combining fugacity-based sampling in the abiotic environment, translation into corresponding concentrations in model lipids and body length as an indicator for increasing bioaccumulation in fish, we present a suggestion for a robust approach that may be a meaningful addition to conventional monitoring methods. This approach potentially increases the efficiency of existing monitoring programs without the need to regularly sacrifice vertebrate species.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1186/s12302-022-00644-w.

Passive air sampling for semi-volatile organic chemicals

During passive air sampling, the amount of a chemical taken up in a sorbent from the air without the help of a pump is quantified and converted into an air concentration. In an equilibrium sampler, this conversion requires a thermodynamic parameter, the equilibrium sorption coefficient between gas-phase and sorbent. In a kinetic sampler, a time-averaged air concentration is obtained using a sampling rate, which is a kinetic parameter. Design requirements for kinetic and equilibrium sampling conflict with each other. The volatility of semi-volatile organic compounds (SVOCs) varies over five orders of magnitude, which implies that passive air samplers are inevitably kinetic samplers for less volatile SVOCs and equilibrium samplers for more volatile SVOCs. Therefore, most currently used passive sampler designs for SVOCs are a compromise that requires the consideration of both a thermodynamic and a kinetic parameter. Their quantitative interpretation depends on assumptions that are rarely fulfilled, and on input parameters, that are often only known with high uncertainty. Kinetic passive air sampling for SVOCs is also challenging because their typically very low atmospheric concentrations necessitate relatively high sampling rates that can only be achieved without the use of diffusive barriers. This in turn renders sampling rates dependent on wind conditions and therefore highly variable. Despite the overall high uncertainty arising from these challenges, passive air samplers for SVOCs have valuable roles to play in recording (i) spatial concentration variability at scales ranging from a few centimeters to tens of thousands of kilometers, (ii) long-term trends, (iii) air contamination in remote and inaccessible locations and (iv) indoor inhalation exposure. Going forward, thermal desorption of sorbents may lower the detection limits for some SVOCs to an extent that the use of diffusive barriers in the kinetic sampling of SVOCs becomes feasible, which is a prerequisite to decreasing the uncertainty of sampling rates. If the thermally stable sorbent additionally has a high sorptive capacity, it may be possible to design true kinetic samplers for most SVOCs. In the meantime, the passive air sampling community would benefit from being more transparent by rigorously quantifying and explicitly reporting uncertainty.

Investigation of polycyclic aromatic hydrocarbons in soils from Caserta provincial territory, southern Italy: Spatial distribution, source apportionment, and risk assessment

The concentrations of polycyclic aromatic hydrocarbons (PAHs) in soils from Caserta provincial territory, southern Italy, were systematically investigated along with their correlations with soil properties and health risk. The concentrations of ∑₁₆PAHs ranged from 10.0 to 4191 ng/g, with a median (1 st quartile, Q1; 3rd quartile, Q3) of 28.5 (17.5-65.0) ng/g; Four-ring PAHs were the most abundant and contributed an average of ∼50.2% of the ∑₁₆PAHs. Significant differences in the spatial distributions of PAHs in soil were observed, with higher levels of PAH contamination found in Caserta city and the surrounding areas. According to the positive matrix factorization (PMF) model, three sources were identified: chemical production and metal smelting, vehicle emissions, and coal/biomass combustion. Soil total organic carbon was significantly correlated with the concentration of total PAHs and the concentrations of PAHs with three-, four-, and five-rings. In contrast, only the concentration of ∑₄DBPs (dibenzo(a,e)pyrene, dibenzo(a,h)pyrene, dibenzo(a,i)pyrene, dibenzo(a,l)pyrene) was well correlated with population density. The soil mass inventory of ∑₁₆PAHs was estimated to be 6.87 metric tons (geometric mean). The ecological risks posed by PAHs in the study are negligible; however, health risks of exposure to soil-borne PAHs were identified based on a probabilistic risk model.

Organochlorine pesticides in the soils from Benevento provincial territory, southern Italy: Spatial distribution, air-soil exchange, and implications for environmental health

This study comprehensively interprets the contamination status of organochlorine pesticides (OCPs) in the soils from Benevento provincial territory, southern Italy, and its implications for environmental health by means of a systematic grid sampling method and geostatistics. The total concentrations of OCPs in the soils ranged from 0.058 to 16.9 ng/g, with a geometric mean (GM) of 0.72 ng/g and an arithmetic mean (AM) of 1.71 ng/g. The levels of OCPs were dominated by p,p'-DDE, p,p'-DDD, HCB, contributing together to 73.5% of the total OCPs. The higher levels of HCB, DDTs, and HCHs found in southwestern, central and east Benevento provincial territory, all occurring adjacent to landfill sites. The residues of OCPs in soil are largely ascribed to their historical use. The OCP inventories in soils of Benevento provincial territory ranged from 0.13 to 4.84 metric tons, with GM = 0.42 metric tons and AM = 0.44 metric tons. The soil is likely to be a sink for DDTs under the influence of regional air transport from pollution hotspots and has the potential to release other chemicals with a high vapor pressure, e.g., HCB, HCHs, and α-Endosulfan. And the mean level of the air-soil exchange flux of HCB, HCHs, and DDTs is estimated to be -1.59, -0.72, and 0.10 ng/m²/day respectively. The potential ecological and human health risks caused by OCPs in the soils are deemed essentially negligible in Benevento provincial territory.

Development of Time-Weighted Average Sampling of Odorous Volatile Organic Compounds in Air with Solid-Phase Microextraction Fiber Housed inside a GC Glass Liner: Proof of Concept

Finding farm-proven, robust sampling technologies for measurement of odorous volatile organic compounds (VOCs) and evaluating the mitigation of nuisance emissions continues to be a challenge. The objective of this research was to develop a new method for quantification of odorous VOCs in air using time-weighted average (TWA) sampling. The main goal was to transform a fragile lab-based technology (i.e., solid-phase microextraction, SPME) into a rugged sampler that can be deployed for longer periods in remote locations. The developed method addresses the need to improve conventional TWA SPME that suffers from the influence of the metallic SPME needle on the sampling process. We eliminated exposure to metallic parts and replaced them with a glass tube to facilitate diffusion from odorous air onto an exposed SPME fiber. A standard gas chromatography (GC) liner recommended for SPME injections was adopted for this purpose. Acetic acid, a common odorous VOC, was selected as a model compound to prove the concept. GC with mass spectrometry (GC–MS) was used for air analysis. An SPME fiber exposed inside a glass liner followed the Fick’s law of diffusion model. There was a linear relationship between extraction time and mass extracted up to 12 h (R² > 0.99) and the inverse of retraction depth (1/Z) (R² > 0.99). The amount of VOC adsorbed via the TWA SPME using a GC glass liner to protect the SPME was reproducible. The limit of detection (LOD, signal-to-noise ratio (S/N) = 3) and limit of quantification (LOQ, S/N = 5) were 10 and 18 µg·m⁻³ (4.3 and 7.2 ppbV), respectively. There was no apparent difference relative to glass liner conditioning, offering a practical simplification for use in the field. The new method related well to field conditions when comparing it to the conventional method based on sorbent tubes. This research shows that an SPME fiber exposed inside a glass liner can be a promising, practical, simple approach for field applications to quantify odorous VOCs.

Degree of phenyl chlorination of DDT-related compounds as potential molecular indicator for industrial DDT emissions

The pesticide DDT (1-chloro-4-[2,2,2-trichloro-1-(4-chlorophenyl)ethyl]benzene) and its degradates are among the most persistent and abundant organochlorine contaminates in the environment, and DDT is still being produced in several Asian countries. In this study, we report for the first time on the detection of DDT-related compounds with one additional or missing chlorine atom at the phenyl group (DDX^±Cl) in sediment and soil samples taken in the vicinity of former and current DDT production sites. These congeneric compounds most likely originate from production residues disposed of into the environment. In order to ensure an adequate identification and quantification of this novel organic pollutant group, individual DDX^±Cl were synthesized as reference compounds by simulating an impure production of DDT in the laboratory. In contrast to DDX^±Cl with (chloro)alkyl moieties, DDX^±Cl with (chloro)alkenyl moieties cannot be unambiguous assigned by gas-chromatographic/mass spectrometric (GC/MS) fragmentation and elution orders. The occurrence of DDX^±Cl in environmental samples allows to draw conclusions about the purity of the production process in the associated production sites. Moreover, they potentially can serve as molecular indicators to differentiate between industrial DDT emissions and insecticidal applications of DDT. This hypothesis has yet to be confirmed by further research.

Quantification of benzene, toluene, ethylbenzene and o-xylene in internal combustion engine exhaust with time-weighted average solid phase microextraction and gas chromatography mass spectrometry

A new and simple method for benzene, toluene, ethylbenzene and o-xylene (BTEX) quantification in vehicle exhaust was developed based on diffusion-controlled extraction onto a retracted solid-phase microextraction (SPME) fiber coating. The rationale was to develop a method based on existing and proven SPME technology that is feasible for field adaptation in developing countries. Passive sampling with SPME fiber retracted into the needle extracted nearly two orders of magnitude less mass (n) compared with exposed fiber (outside of needle) and sampling was in a time weighted-averaging (TWA) mode. Both the sampling time (t) and fiber retraction depth (Z) were adjusted to quantify a wider range of Cgas. Extraction and quantification is conducted in a non-equilibrium mode. Effects of Cgas, t, Z and T were tested. In addition, contribution of n extracted by metallic surfaces of needle assembly without SPME coating was studied. Effects of sample storage time on n loss was studied. Retracted TWA-SPME extractions followed the theoretical model. Extracted n of BTEX was proportional to Cgas, t, Dg, T and inversely proportional to Z. Method detection limits were 1.8, 2.7, 2.1 and 5.2 mg m(-3) (0.51, 0.83, 0.66 and 1.62 ppm) for BTEX, respectively. The contribution of extraction onto metallic surfaces was reproducible and influenced by Cgas and t and less so by T and by the Z. The new method was applied to measure BTEX in the exhaust gas of a Ford Crown Victoria 1995 and compared with a whole gas and direct injection method.

Integrated methodology for assessing the HCH groundwater pollution at the multi-source contaminated mega-site Bitterfeld/Wolfen

A large-scale groundwater contamination characterises the Pleistocene groundwater system of the former industrial and abandoned mining region Bitterfeld/Wolfen, Eastern Germany. For more than a century, local chemical production and extensive lignite mining caused a complex contaminant release from local production areas and related dump sites. Today, organic pollutants (mainly organochlorines) are present in all compartments of the environment at high concentration levels. An integrated methodology for characterising the current situation of pollution as well as the future fate development of hazardous substances is highly required to decide on further management and remediation strategies. Data analyses have been performed on regional groundwater monitoring data from about 10 years, containing approximately 3,500 samples, and up to 180 individual organic parameters from almost 250 observation wells. Run-off measurements as well as water samples were taken biweekly from local creeks during a period of 18 months. A kriging interpolation procedure was applied on groundwater analytics to generate continuous distribution patterns of the nodal contaminant samples. High-resolution geological 3-D modelling serves as a database for a regional 3-D groundwater flow model. Simulation results support the future fate assessment of contaminants. A first conceptual model of the contamination has been developed to characterise the contamination in regional surface waters and groundwater. A reliable explanation of the variant hexachlorocyclohexane (HCH) occurrence within the two local aquifer systems has been derived from the regionalised distribution patterns. Simulation results from groundwater flow modelling provide a better understanding of the future pollutant migration paths and support the overall site characterisation. The presented case study indicates that an integrated assessment of large-scale groundwater contaminations often needs more data than only from local groundwater monitoring. The developed methodology is appropriate to assess POP-contaminated mega-sites including, e.g. HCH deposits. Although HCH isomers are relevant groundwater pollutants at this site, further organochlorine pollutants are present at considerably higher levels. The study demonstrates that an effective evaluation of the current situation of contamination as well as of the related future fate development requires detailed information of the entire observed system.

Time-weighted average SPME analysis for in planta determination of cVOCs

The potential of phytoscreening for plume delineation at contaminated sites has promoted interest in innovative, sensitive contaminant sampling techniques. Solid-phase microextraction (SPME) methods have been developed, offering quick, undemanding, noninvasive sampling without the use of solvents. In this study, time-weighted average SPME (TWA-SPME) sampling was evaluated for in planta quantification of chlorinated solvents. TWA-SPME was found to have increased sensitivity over headspace and equilibrium SPME sampling. Using a variety of chlorinated solvents and a polydimethylsiloxane/carboxen (PDMS/CAR) SPME fiber, most compounds exhibited near linear or linear uptake over the sampling period. Smaller, less hydrophobic compounds exhibited more nonlinearity than larger, more hydrophobic molecules. Using a specifically designed in planta sampler, field sampling was conducted at a site contaminated with chlorinated solvents. Sampling with TWA-SPME produced instrument responses ranging from 5 to over 200 times higher than headspace tree core sampling. This work demonstrates that TWA-SPME can be used for in planta detection of a broad range of chlorinated solvents and methods can likely be applied to other volatile and semivolatile organic compounds.

Static SPME sampling of VOCs emitted from indoor building materials: prediction of calibration curves of single compounds for two different emission cells

Solid-phase microextraction (SPME) is a powerful technique, easy to implement for on-site static sampling of indoor VOCs emitted by building materials. However, a major constraint lies in the establishment of calibration curves which requires complex generation of standard atmospheres. Thus, the purpose of this paper is to propose a model to predict adsorption kinetics (i.e., calibration curves) of four model VOCs. The model is based on Fick's laws for the gas phase and on the equilibrium or the solid diffusion model for the adsorptive phase. Two samplers (the FLEC® and a home-made cylindrical emission cell), coupled to SPME for static sampling of material emissions, were studied. A good agreement between modeling and experimental data is observed and results show the influence of sampling rate on mass transfer mode in function of sample volume. The equilibrium model is adapted to quite large volume sampler (cylindrical cell) while the solid diffusion model is dedicated to small volume sampler (FLEC®). The limiting steps of mass transfer are the diffusion in gas phase for the cylindrical cell and the pore surface diffusion for the FLEC®. In the future, this modeling approach could be a useful tool for time-saving development of SPME to study building material emission in static mode sampling.

Fast and simple droplet sampling of sap from plant tissues and capillary microextraction of soluble saccharides for picogram-scale quantitative determination with GC-MS

Soluble saccharides are very important metabolites of the life cycle and synthesis of structural polysaccharide components (cellulose, hemicellulose, pectin, etc.) of cell walls. A new method for droplet sampling of saps from tissues of organisms and manipulation routines in capillaries for extraction, derivation, and partitioning were developed for picogram-scale quantitative determination with gas chromatography-mass spectrometry (GC-MS). Five to ten microliters of sap was sampled with a glass capillary containing ribitol (internal standard). Subsequently, the analytes were acetylated with acetic anhydride and catalyzed by 1-methylimidazole. Finally, the soluble saccharides were qualitatively detected with GC-MS SIM (selective ion monitoring) mode. The linear ranges of the method were up to 1×10(-6) mol/L and the theoretically lowest limits of detection (LOD, s/n≥3) were up to 1×10(-9) mol/L. The method is suitable and applicable to analysis of soluble monosaccharides in fresh tissues and other aqueous samples in wide fields of agriculture, food science, biological sciences, and even medical studies.

Headspace-solid-phase microextraction using a dodecylsulfate-doped polypyrrole film coupled to ion mobility spectrometry for analysis methyl tert-butyl ether in water and gasoline

A simple and sensitive method for the determination of methyl tert-butyl ether (MTBE) in water using headspace-solid-phase microextraction (HS-SPME) at sub-ng mL(-1) concentrations is described. The analysis was carried out using a cooled SPME fiber coated with a film of dodecylsulfate-doped polypyrrole coupled to ion mobility spectrometry equipped with corona discharge ionization. The headspace-solid-phase microextraction experimental procedures to extract MTBE in water samples were optimized with a dodecylsulfate-doped polypyrrole coated fiber at a 30 min extraction time, extraction temperature of 40 degrees C, sodium chloride concentration of 2.5 mol L(-1) and desorption temperature of 140 degrees C. Two linear calibration curves respectively in the ranges of 2-17 ng mL(-1) and 10-70 ng mL(-1) with detection limits of 0.7 ng mL(-1) and 4.9 ng mL(-1) were obtained. Relative standard deviations for three replicates in water samples were <10%. The capability of dodecylsulfate-doped polypyrrole to extract MTBE has been compared with the results obtained based on the literature data for commercial fiber. The results shows that dodecylsulfate-doped polypyrrole, as a solid-phase microextraction fiber coating, is suitable for successful extraction of MTBE having detection limits comparable to what obtained with commercial fibers. Finally, the proposed method was applied to the analysis of MTBE in three ground water samples and regular unleaded gasoline from petrol station in Tehran central district, Iran.

Sampling atmospheric pesticides with SPME: Laboratory developments and field study

To estimate the atmospheric exposure of the greenhouse workers to pesticides, solid phase microextraction (SPME) was used under non-equilibrium conditions. Using Fick's law of diffusion, the concentrations of pesticides in the greenhouse can be calculated using pre-determined sampling rates (SRs). Thus the sampling rates (SRs) of two modes of SPME in the lab and in the field were determined and compared. The SRs for six pesticides in the lab were 20.4-48.3 mL min(-1) for the exposed fiber and 0.166-0.929 mL min(-1) for the retracted fiber. In field sampling, two pesticides, dichlorvos and cyprodinil were detected with exposed SPME. SR with exposed SPME for dichlorvos in the field (32.4 mL min(-1)) was consistent with that in the lab (34.5 mL min(-1)). SR for dichlorvos in the field (32.4 mL min(-1)) was consistent with that in the lab (34.5 mL min(-1)). The trends of temporal concentration and the inhalation exposure were also obtained.

Hydroxylated metabolites of beta- and delta-hexachlorocyclohexane: bacterial formation, stereochemical configuration, and occurrence in groundwater at a former production site

Although the use of hexachlorocyclohexane (HCH), one of the most popular insecticides after the Second World War, has been discontinued in many countries, problems remain from former production and waste sites. Despite the widespread occurrence of HCHs, the environmental fate of these compounds is not fully understood. In particular, environmental metabolites of the more persistent beta-HCH and delta-HCH have not been fully identified. Such knowledge, however, is important to follow degradation and environmental fate of the HCHs. In the present study, several hydroxy metabolites that formed during incubation of beta- and delta-HCH with the common soil microorganism Sphingobium indicum B90A were isolated, characterized, and stereochemically identified by gas chromatography-mass spectrometry (GC-MS) and nuclear magnetic resonance spectroscopy (NMR). The metabolites were identified as isomeric pentachlorocyclohexanols (B1, D1) and tetrachlorocyclohexane-1,4-diols (B2, D2); delta-HCH additionally formed a tetrachloro-2-cyclohexen-1-ol (D3) and a trichloro-2-cyclohexene-1,4-diol (D4), most likely by hydroxylation of delta-pentachlorocyclohexene (delta-PCCH), initially formed by dehydrochlorination. The dehydrochlorinase LinA was responsible for conversion of delta-HCH into delta-PCCH, and the haloalkane dehalogenase LinB was responsible for the transformation of beta-HCH and delta-HCH into B1 and D1, respectively, and subsequently into B2 and D2, respectively. LinB was also responsible for transforming delta-PCCH into D3 and subsequently into D4. These hydroxylations proceeded in accordance with SN2 type reactions with initial substitution of equatorial Cls and formation of axially hydroxylated stereoisomers. The apparently high reactivity of equatorial Cls in beta- and delta-HCH toward initial hydroxylation by LinB of Sphingobium indicum B90A is remarkable when considering the otherwise usually higher reactivity of axial Cls. Several of these metabolites were detected in groundwater from a former HCH production site in Switzerland. Their presence indicates that these reactions proceed under natural environmental conditions and that the metabolites are of environmental relevance.

Passive air sampling for persistent organic pollutants: introductory remarks to the special issue

There have been a number of developments in the need, design and use of passive air samplers (PAS) for persistent organic pollutants (POPs). This article is the first in a Special Issue of the journal to review these developments and some of the data arising from them. We explain the need and benefit of developing PAS for POPs, the different approaches that can be used, and highlight future developments and needs.